Introducing dusty plasma particle growth of nanospherical titanium dioxide
Authors:
Bhavesh Ramkorun,
Swapneal Jain,
Adib Taba,
Masoud Mahjouri-Samani,
Michael E. Miller,
Saikat C. Thakur,
Edward Thomas Jr.,
Ryan B. Comes
Abstract:
In dusty plasma environments, the spontaneous growth of nanoparticles from reactive gases has been extensively studied for over three decades, primarily focusing on hydrocarbons and silicate particles. Here, we introduce the growth of titanium dioxide, a wide band gap semiconductor, as dusty plasma nanoparticles. The resultant particles exhibited a spherical morphology and reached a maximum homoge…
▽ More
In dusty plasma environments, the spontaneous growth of nanoparticles from reactive gases has been extensively studied for over three decades, primarily focusing on hydrocarbons and silicate particles. Here, we introduce the growth of titanium dioxide, a wide band gap semiconductor, as dusty plasma nanoparticles. The resultant particles exhibited a spherical morphology and reached a maximum homogeneous radius of 230 $\pm$ 17 nm after an elapsed time of 70 seconds. The particle grew linearly and the growth displayed a cyclic behavior; that is, upon reaching their maximum radius, the largest particles fell out of the plasma, and a new growth cycle immediately followed. The particles were collected after being grown for different amounts of time and imaged using scanning electron microscopy. Further characterization was carried out using energy dispersive X-ray spectroscopy, X-ray diffraction and Raman spectroscopy to elucidate the chemical composition and crystalline properties of the maximally sized particles. Initially, the as-grown particles after 70 seconds exhibited an amorphous structure. However, annealing treatments at temperatures of 400 $^\circ$C and 800 $^\circ$C induced crystallization, yielding anatase and rutile phases, respectively. Notably, annealing at 600 $^\circ$C resulted in a mixed phase of anatase and rutile. These findings open new avenues for a rapid and controlled growth technique of titanium dioxide as dusty plasma.
△ Less
Submitted 26 October, 2023;
originally announced October 2023.
Scaling of discrete element model parameters for cohesionless and cohesive solid
Authors:
Subhash C. Thakur,
Jin Y. Ooi,
Hossein Ahmadian
Abstract:
One of the major shortcomings of discrete element modelling (DEM) is the computational cost required when the number of particles is huge, especially for fine powders and/or industry scale simulations. This study investigates the scaling of model parameters that is necessary to produce scale independent predictions for cohesionless and cohesive solid under quasi-static simulation of confined compr…
▽ More
One of the major shortcomings of discrete element modelling (DEM) is the computational cost required when the number of particles is huge, especially for fine powders and/or industry scale simulations. This study investigates the scaling of model parameters that is necessary to produce scale independent predictions for cohesionless and cohesive solid under quasi-static simulation of confined compression and unconfined compression to failure in uniaxial test. A bilinear elasto-plastic adhesive frictional contact model was used. The results show that contact stiffness (both normal and tangential) for loading and unloading scales linearly with the particle size and the adhesive force scales very well with the square of the particle size. This scaling law would allow scaled up particle DEM model to exhibit bulk mechanical loading response in uniaxial test that is similar to a material comprised of much smaller particles. This is a first step towards a mesoscopic representation of a cohesive powder that is phenomenological based to produce the key bulk characteristics of a cohesive solid and has the potential to gain considerable computational advantage for industry scale DEM simulations.
△ Less
Submitted 1 June, 2015;
originally announced June 2015.
