-
Martensite decomposition kinetics in additively manufactured Ti-6Al-4V alloy: in-situ characterisation and phase-field modelling
Authors:
A. D. Boccardo,
Z. Zou,
M. Simonelli,
M. Tong,
J. Segurado,
S. B. Leen,
D. Tourret
Abstract:
Additive manufacturing of Ti-6Al-4V alloy via laser powder-bed fusion leads to non-equilibrium $α'$ martensitic microstructures, with high strength but poor ductility and toughness. These properties may be modified by heat treatments, whereby the $α'$ phase decomposes into equilibrium $α+β$ structures, while possibly conserving microstructural features and length scales of the $α'$ lath structure.…
▽ More
Additive manufacturing of Ti-6Al-4V alloy via laser powder-bed fusion leads to non-equilibrium $α'$ martensitic microstructures, with high strength but poor ductility and toughness. These properties may be modified by heat treatments, whereby the $α'$ phase decomposes into equilibrium $α+β$ structures, while possibly conserving microstructural features and length scales of the $α'$ lath structure. Here, we combine experimental and computational methods to explore the kinetics of martensite decomposition. Experiments rely on in-situ characterisation (electron microscopy and diffraction) during multi-step heat treatment from 400$^{\circ}$C up to the alloy $β$-transus temperature (995$^{\circ}$C). Computational simulations rely on an experimentally-informed computationally-efficient phase-field model. Experiments confirmed that as-built microstructures were fully composed of martensitic $α'$ laths. During martensite decomposition, nucleation of the $β$ phase occurs primarily along $α'$ lath boundaries, with traces of $β$ nucleation along crystalline defects. Phase-field results, using electron backscatter diffraction maps of as-built microstructures as initial conditions, are compared directly with in-situ characterisation data. Experiments and simulations confirmed that, while full decomposition into stable $α+β$ phases may be complete at 650$^{\circ}$C provided sufficient annealing time, visible morphological evolution of the microstructure was only observed for $T\geq\,$700$^{\circ}$C, without modification of the prior-$β$ grain structure.
△ Less
Submitted 15 April, 2024;
originally announced April 2024.
-
Efficiency and accuracy of GPU-parallelized Fourier spectral methods for solving phase-field models
Authors:
A. D. Boccardo,
M. Tong,
S. B. Leen,
D. Tourret,
J. Segurado
Abstract:
Phase-field models are widely employed to simulate microstructure evolution during processes such as solidification or heat treatment. The resulting partial differential equations, often strongly coupled together, may be solved by a broad range of numerical methods, but this often results in a high computational cost, which calls for advanced numerical methods to accelerate their resolution. Here,…
▽ More
Phase-field models are widely employed to simulate microstructure evolution during processes such as solidification or heat treatment. The resulting partial differential equations, often strongly coupled together, may be solved by a broad range of numerical methods, but this often results in a high computational cost, which calls for advanced numerical methods to accelerate their resolution. Here, we quantitatively test the efficiency and accuracy of semi-implicit Fourier spectral-based methods, implemented in Python programming language and parallelized on a graphics processing unit (GPU), for solving a phase-field model coupling Cahn-Hilliard and Allen-Cahn equations. We compare computational performance and accuracy with a standard explicit finite difference (FD) implementation with similar GPU parallelization on the same hardware. For a similar spatial discretization, the semi-implicit Fourier spectral (FS) solvers outperform the FD resolution as soon as the time step can be taken 5 to 6 times higher than afforded for the stability of the FD scheme. The accuracy of the FS methods also remains excellent even for coarse grids, while that of FD deteriorates significantly. Therefore, for an equivalent level of accuracy, semi-implicit FS methods severely outperform explicit FD, by up to 4 orders of magnitude, as they allow much coarser spatial and temporal discretization.
△ Less
Submitted 14 June, 2023; v1 submitted 7 June, 2023;
originally announced June 2023.
-
Telluride nanocrystals with adjustable amorphous shell thickness and core-shell structure modulation by aqueous cation-exchange
Authors:
Xinyuan Li,
Mengyao Su,
Yi-Chi Wang,
Meng Xu,
Minman Tong,
Sarah J. Haigh,
Jiatao Zhang
Abstract:
Engineering the structure of core-shell colloidal semiconductor nanoparticles (CSNPs) is attractive due to the potential to enhance photo-induced charge transfer (PICT) and induce favourable optical and electronic properties. Nonetheless, the sensitivity of telluride CSNPs to high temperatures makes it challenging to precisely modulate their surface crystallinity. Herein, we have developed an effi…
▽ More
Engineering the structure of core-shell colloidal semiconductor nanoparticles (CSNPs) is attractive due to the potential to enhance photo-induced charge transfer (PICT) and induce favourable optical and electronic properties. Nonetheless, the sensitivity of telluride CSNPs to high temperatures makes it challenging to precisely modulate their surface crystallinity. Herein, we have developed an efficient strategy for synthesising telluride CSNPs with thin amorphous shells using aqueous cation exchange (ACE). By changing the synthesis temperature in the range 40 to 110C, the crystallinity of the CdTe nanoparticles was controllable from perfect crystals with no detectable amorphous shell (c-CdTe) to a core-shell structure with a crystalline CdTe NP core covered by an amorphous shell of tunable thickness up to 7-8nm (c@a-CdTe) . A second ACE step transformed the c@a-CdTe to crystalline CdTe@HgTe core-shell NPs. The c@a-CdTe nanoparticles synthesized at 60C and having a 4-5 nm thick amorphous shell, exhibited the highest surface-enhanced Raman scattering activity with a high enhancement factor around 8.82x10^5, attributed to the coupling between the amorphous shell and the crystalline core.
△ Less
Submitted 9 December, 2022;
originally announced December 2022.
-
Nonreciprocal transport in a bilayer of MnBi2Te4 and Pt
Authors:
Chen Ye,
Xiangnan Xie,
Wenxing Lv3,
Ke Huang,
Allen Jian Yang,
Sicong Jiang,
Xue Liu,
Dapeng Zhu,
Xuepeng Qiu,
Mingyu Tong,
Tong Zhou,
Chuang-Han Hsu,
Guoqing Chang,
Hsin Lin,
Peisen Li,
Kesong Yang,
Zhenyu Wang,
Tian Jiang,
Xiao Renshaw Wang
Abstract:
MnBi2Te4 (MBT) is the first intrinsic magnetic topological insulator with the interaction of spin-momentum locked surface electrons and intrinsic magnetism, and it exhibits novel magnetic and topological phenomena. Recent studies suggested that the interaction of electrons and magnetism can be affected by the Mn-doped Bi2Te3 phase at the surface due to inevitable structural defects. Here we report…
▽ More
MnBi2Te4 (MBT) is the first intrinsic magnetic topological insulator with the interaction of spin-momentum locked surface electrons and intrinsic magnetism, and it exhibits novel magnetic and topological phenomena. Recent studies suggested that the interaction of electrons and magnetism can be affected by the Mn-doped Bi2Te3 phase at the surface due to inevitable structural defects. Here we report an observation of nonreciprocal transport, i.e. current-direction-dependent resistance, in a bilayer composed of antiferromagnetic MBT and nonmagnetic Pt. The emergence of the nonreciprocal response below the Néel temperature confirms a correlation between nonreciprocity and intrinsic magnetism in the surface state of MBT. The angular dependence of the nonreciprocal transport indicates that nonreciprocal response originates from the asymmetry scattering of electrons at the surface of MBT mediated by magnon. Our work provides an insight into nonreciprocity arising from the correlation between magnetism and Dirac surface electrons in intrinsic magnetic topological insulators.
△ Less
Submitted 9 February, 2022;
originally announced February 2022.
-
F-ion bridged Double-Decker Dysprosium Metallacrown with high-performance Single Molecule Magnet properties
Authors:
Yun-Xia Qu,
Jin Wang,
Ze-Yu Ruan,
Guo-Zhang Huang,
Yan-Cong Chen,
Jun-Liang Liu,
Ming-Liang Tong
Abstract:
We report here a linear fluoride-bridged Double-Decker Dysprosium metallacrown with high-performance SMM. The successful introduction of stronger magnetic exchange-coupling in the axial direction, which is collinear with the Ising-type magnetic anisotropy axis of dysprosium ions, plays a pivotal role in improving the SMM properties of the double-decker Dysprosium metallacrown.
We report here a linear fluoride-bridged Double-Decker Dysprosium metallacrown with high-performance SMM. The successful introduction of stronger magnetic exchange-coupling in the axial direction, which is collinear with the Ising-type magnetic anisotropy axis of dysprosium ions, plays a pivotal role in improving the SMM properties of the double-decker Dysprosium metallacrown.
△ Less
Submitted 9 June, 2021;
originally announced June 2021.
-
Rectangle-like hysteresis in a Dysprosium Metallacrown Magnet with Linear F-Dy-F Anisotropic Moiety
Authors:
Si-Guo Wu,
Ze-Yu Ruan,
Jie-Yu Zheng,
Guo-Zhang Huang,
Veacheslav Vieru,
Yan-Cong Chen,
Le Tuan Anh Ho,
Jun-Liang Liu,
Liviu F. Chibotaru,
Ming-Liang Tong
Abstract:
Single-molecule magnets (SMMs) exhibiting open hysteresis loops may potentially apply to molecule-based information processing and storage. However, the capacity to retain magnetic memory is always limited by zero-field quantum tunneling of magnetization (QTM). Herein, a well-designed dysprosium metallacrown SMM, consisting of an endohedral approximate linear F-Dy-F strong anisotropic moiety in a…
▽ More
Single-molecule magnets (SMMs) exhibiting open hysteresis loops may potentially apply to molecule-based information processing and storage. However, the capacity to retain magnetic memory is always limited by zero-field quantum tunneling of magnetization (QTM). Herein, a well-designed dysprosium metallacrown SMM, consisting of an endohedral approximate linear F-Dy-F strong anisotropic moiety in a peripheral [15-MCNi-5] metallacrown (MC), is reported with the largest reversal barrier of 1060 cm-1 among d-f SMMs. Rectangle-like hysteresis loops are observed with the huge squareness (remanence/saturation magnetization) up to 97% at 2 K. More importantly, zero-field QTM step is phenomenologically removed by minimizing the dipole coupling and hyperfine interactions. The results demonstrate for the first time that zero-field QTM step can be eliminated via manipulating the ligand field and vanishing the external magnetic perturbations, which illuminates a promising blueprint for developing high-performance SMMs.
△ Less
Submitted 20 May, 2021;
originally announced May 2021.
-
Field-induced oscillation of magnetization blocking in holmium metallacrown magnet
Authors:
Si-Guo Wu,
Ze-Yu Ruan,
Guo-Zhang Huang,
Jie-Yu Zheng,
Veacheslav Vieru,
Gheorghe Taran,
Jin Wang,
Yan-Cong Chen,
Jun-Liang Liu,
Le Tuan Anh Ho,
Liviu F. Chibotaru,
Wolfgang Wernsdorfer,
Xiao-Ming Chen,
Ming-Liang Tong
Abstract:
Single-molecule magnets (SMMs) are promising elements for quantum informatics. In the presence of strong magnetic anisotropy, they exhibit magnetization blocking - a magnetic memory effect at the level of a single molecule. Recent studies have shown that the SMM performance scales with the height of magnetization blocking barrier. By employing molecular engineering this can be significantly modifi…
▽ More
Single-molecule magnets (SMMs) are promising elements for quantum informatics. In the presence of strong magnetic anisotropy, they exhibit magnetization blocking - a magnetic memory effect at the level of a single molecule. Recent studies have shown that the SMM performance scales with the height of magnetization blocking barrier. By employing molecular engineering this can be significantly modified, remaining independent from other external factors such as magnetic field. Taking advantage of hyperfine coupling of electronic and nuclear spins further enhances their functionality, however, a poor understanding of relaxation mechanisms in such SMMs limits the exploitation of nuclear-spin molecular qubits. Here we report the opening discovery of field-dependent oscillation of the magnetization blocking barrier in a new holmium metallacrown magnet driven by the switch of relaxation mechanisms involving hyperfine interaction. Single-crystal magnetic hysteresis measurements combined with first-principles calculations reveal an activated temperature dependence of magnetic relaxation dominated either by incoherent quantum tunneling of magnetization at anti-crossing points of exchange-hyperfine states or by Orbach-like processes at crossing points. We demonstrate that these relaxation mechanisms can be consecutively switched on and off by increasing the external field, which paves a way for manipulating the magnetization dynamics of SMMs using hyperfine interaction.
△ Less
Submitted 8 June, 2020;
originally announced June 2020.
-
Experimental realization of nonadiabatic geometric gates with a superconducting Xmon qubit
Authors:
P. Z. Zhao,
Zhangjingzi Dong,
Zhenxing Zhang,
Guoping Guo,
D. M. Tong,
Yi Yin
Abstract:
Geometric phases are only dependent on evolution paths but independent of evolution details so that they own some intrinsic noise-resilience features. Based on different geometric phases, various quantum gates have been proposed, such as nonadiabatic geometric gates based on nonadiabatic Abelian geometric phases and nonadiabatic holonomic gates based on nonadiabatic non-Abelian geometric phases. U…
▽ More
Geometric phases are only dependent on evolution paths but independent of evolution details so that they own some intrinsic noise-resilience features. Based on different geometric phases, various quantum gates have been proposed, such as nonadiabatic geometric gates based on nonadiabatic Abelian geometric phases and nonadiabatic holonomic gates based on nonadiabatic non-Abelian geometric phases. Up to now, nonadiabatic holonomic one-qubit gates have been experimentally demonstrated with the supercondunting transmon, where three lowest levels with cascaded configuration are all applied in the operation. However, the second excited states of transmons have relatively short coherence time, which results in a lessened fidelity of quantum gates. Here, we experimentally realize Abelian-geometric-phase-based nonadiabatic geometric one-qubit gates with a superconducting Xmon qubit. The realization is performed on two lowest levels of an Xmon qubit and thus avoids the influence from the short coherence time of the second excited state. The experimental result indicates that the average fidelities of single-qubit gates can be up to 99.6% and 99.7% characterized by quantum process tomography and randomized benchmarking, respectively.
△ Less
Submitted 22 September, 2019;
originally announced September 2019.
-
Experimental Evidence of the Topological Surface States in Mg3Bi2 Films Grown by Molecular Beam Epitaxy
Authors:
Tong Zhou,
Xie-Gang Zhu,
Mingyu Tong,
Yun Zhang,
Xue-Bing Luo,
Xiangnan Xie,
Wei Feng,
Qiuyun Chen,
Shiyong Tan,
Zhen-Yu Wang,
Tian Jiang,
Xin-Chun Lai,
Xuejun Yang
Abstract:
Type-II nodal line semimetal (NLS) is a new quantum state hosting one-dimensional closed loops formed by the crossing of two bands which have the same sign in their slopes along the radial direction of the loop. According to the theoretical prediction, Mg3Bi2 is an ideal candidate for studying the type-II NLS by tuning its spin-orbit coupling (SOC). In this paper, high quality Mg3Bi2 films are gro…
▽ More
Type-II nodal line semimetal (NLS) is a new quantum state hosting one-dimensional closed loops formed by the crossing of two bands which have the same sign in their slopes along the radial direction of the loop. According to the theoretical prediction, Mg3Bi2 is an ideal candidate for studying the type-II NLS by tuning its spin-orbit coupling (SOC). In this paper, high quality Mg3Bi2 films are grown by molecular beam epitaxy (MBE). By in-situ angle resolved photoemission spectroscopy (ARPES), a pair of surface resonance bands (SRBs) around Gamma point is clearly seen. It shows that Mg3Bi2 films grown by MBE is Mg(1)-terminated by comparing the ARPES data with the first principles calculations results. And, the temperature dependent weak anti-localization (WAL) effect in Mg3Bi2 films is observed under low magnetic field, which shows a clear two dimensional (2D) e-e scattering characteristics by fitting with the Hikami-Larkin-Nagaoka (HLN) model. Combining with ARPES, magneto-transport measurements and the first principles calculations, this work proves that Mg3Bi2 is a semimetal with topological surface states TSSs, which paves the way for Mg3Bi2 as an ideal materials platform for studying the exotic features of type-II nodal line semimetals (NLSs) and the topological phase transition by tuning its SOC.
△ Less
Submitted 15 June, 2019;
originally announced June 2019.
-
Dimensional crossover and topological nature of the thin films of a three-dimensional topological insulator by band gap engineering
Authors:
Zhenyu Wang,
Tong Zhou,
Tian Jiang,
Hongyi Sun,
Yunyi Zang,
Yan Gong,
Jianghua Zhang,
Mingyu Tong,
Xiangnan Xie,
Qihang Liu,
Chaoyu Chen,
Ke He,
Qi-Kun Xue
Abstract:
Identification and control of topological phases in topological thin films offer great opportunity for fundamental research and the fabrication of topology-based devices. Here, combining molecular beam epitaxy, angle-resolved photoemission spectroscopy and ab-initio calculations, we investigate the electronic structure evolution in (Bi1-xInx)2Se3 films with thickness from 2 to 13 quintuple layers.…
▽ More
Identification and control of topological phases in topological thin films offer great opportunity for fundamental research and the fabrication of topology-based devices. Here, combining molecular beam epitaxy, angle-resolved photoemission spectroscopy and ab-initio calculations, we investigate the electronic structure evolution in (Bi1-xInx)2Se3 films with thickness from 2 to 13 quintuple layers. We identify several phases with their characteristic topological nature and evolution between them, i.e., dimensional crossover from a three-dimensional topological insulator with gapless surface state to its two-dimensional counterpart with gapped surface state, and topological phase transition from topological insulator to a normal semiconductor with increasing In concentration x. Furthermore, by introducing In alloying as an external knob of band gap engineering, we experimentally demonstrated the trivial topological nature of Bi2Se3 thin films (below 6 quintuple layers) as two-dimensional gapped systems, in consistent with our theoretical calculations. Our results provide not only a comprehensive phase diagram of (Bi1-xInx)2Se3 and a route to control its phase evolution, but also a practical way to experimentally determine the topological properties of a gapped compound by topological phase transition and band gap engineering.
△ Less
Submitted 16 May, 2019;
originally announced May 2019.
-
Carbonate-Bridged Dinuclear and Trinuclear Dysprosium(III) Single-Molecule Magnets
Authors:
Guang Lu,
Yan-Cong Chen,
Si-Guo Wu,
Guo-Zhang Huang,
Jun-Liang Liu,
Zhao-Ping Ni,
Ming-Liang Tong
Abstract:
In 2016, we reported a single-ion magnet [Dy(bbpen)Br] with an energy barrier over 1000 K. Here a dimeric [Dy2(mu-CO3)(bbpen)2(H2O)].H2O.CH3OH (1) and a trimeric [Dy3(mu3-CO3)(bppen)3](CF3SO3).H2O (2) single-molecule magnets (SMMs) were obtained through replacing the Br- anion with the carbonate bridge. Their effective relaxation barriers at zero dc field are decrease to 51 K and 422 K, respective…
▽ More
In 2016, we reported a single-ion magnet [Dy(bbpen)Br] with an energy barrier over 1000 K. Here a dimeric [Dy2(mu-CO3)(bbpen)2(H2O)].H2O.CH3OH (1) and a trimeric [Dy3(mu3-CO3)(bppen)3](CF3SO3).H2O (2) single-molecule magnets (SMMs) were obtained through replacing the Br- anion with the carbonate bridge. Their effective relaxation barriers at zero dc field are decrease to 51 K and 422 K, respectively, which are consist with their structural modifications.
△ Less
Submitted 15 July, 2018;
originally announced July 2018.
-
Triple Exponential Relaxation Dynamics in a Metallacrown-Based {$Dy^{III}Cu^{II}_5$} 3d-4f Single-Molecule Magnet
Authors:
Quan-Wen Li,
Rui-Chen Wan,
Jin Wang,
Yan-Cong Chen,
Jun-Liang Liu,
Daniel Reta,
Nicholas F. Chilton,
Zhen-Xing Wang,
Ming-Liang Tong
Abstract:
The interplay of strong single-ion anisotropy and magnetic interactions often give rise to novel magnetic behavior and can provide additional routes for controlling magnetization dynamics. However, novel effects arising from interactions between lanthanide and transition-metal ions are nowadays rarely observed. Herein, a {$Dy^{III}Cu^{II}_5$} 3d-4f single-molecule magnet (SMM) is constructed as a…
▽ More
The interplay of strong single-ion anisotropy and magnetic interactions often give rise to novel magnetic behavior and can provide additional routes for controlling magnetization dynamics. However, novel effects arising from interactions between lanthanide and transition-metal ions are nowadays rarely observed. Herein, a {$Dy^{III}Cu^{II}_5$} 3d-4f single-molecule magnet (SMM) is constructed as a rigid and planar [15-MC-5] metallacrown (MC), where the $Dy^{III}$ ion is trapped in the central pseudo-$D_{5h}$ pocket. A strong axial crystal field (CF) imbues the $Dy^{III}$ ion with large Ising-type magnetic anisotropy, and we are able to observe and model the magnetic interactions between the $Cu^{II}-Cu^{II}$ and $Dy^{III}-Cu^{II}$ pairs. Butterfly-shaped magnetic hysteresis shows clear steps at $\pm$0.4 T, coincident with level crossings in our model exchange Hamiltonian between the {$Cu^{II}_5$} and $Dy^{III}$ spin systems. Most intriguingly, this air-stable SMM exhibits three distinct regimes in its magnetic relaxation dynamics, all clearly displaying an exponential dependence on temperature.
△ Less
Submitted 16 April, 2018;
originally announced April 2018.
-
The Effect of Temperature on Cu-K-In-Se Thin Films
Authors:
Christopher P. Muzzillo,
Ho Ming Tong,
Timothy J. Anderson
Abstract:
Films of Cu-K-In-Se were co-evaporated at varied K/(K+Cu) compositions and substrate temperatures (with constant (K+Cu)/In ~ 0.85). Increased Na composition on the substrate's surface and decreased growth temperature were both found to favor Cu1-xKxInSe2 (CKIS) alloy formation, relative to mixed-phase CuInSe2 + KInSe2 formation. Structures from X-ray diffraction (XRD), band gaps, resistivities, mi…
▽ More
Films of Cu-K-In-Se were co-evaporated at varied K/(K+Cu) compositions and substrate temperatures (with constant (K+Cu)/In ~ 0.85). Increased Na composition on the substrate's surface and decreased growth temperature were both found to favor Cu1-xKxInSe2 (CKIS) alloy formation, relative to mixed-phase CuInSe2 + KInSe2 formation. Structures from X-ray diffraction (XRD), band gaps, resistivities, minority carrier lifetimes and carrier concentrations from time-resolved photoluminescence were in agreement with previous reports, where low K/(K+Cu) composition films exhibited properties promising for photovoltaic (PV) absorbers. Films grown at 400-500 C were then annealed to 600 C under Se, which caused K loss by evaporation in proportion to initial K/(K+Cu) composition. Similar to growth temperature, annealing drove CKIS alloy consumption and CuInSe2 + KInSe2 production, as evidenced by high temperature XRD. Annealing also decomposed KInSe2 and formed K2In12Se19. At high temperature the KInSe2 crystal lattice gradually contracted as temperature and time increased, as well as just time. Evaporative loss of K during annealing could accompany the generation of vacancies on K lattice sites, and may explain the KInSe2 lattice contraction. This knowledge of Cu-K-In-Se material chemistry may be used to predict and control minor phase impurities in Cu(In,Ga)(Se,S)2 PV absorbers-where impurities below typical detection limits may have played a role in recent world record PV efficiencies that utilized KF post-deposition treatments.
△ Less
Submitted 18 March, 2017;
originally announced March 2017.
-
The Effect of Na on Cu-K-In-Se Thin Film Growth
Authors:
Christopher P. Muzzillo,
Ho Ming Tong,
Timothy J. Anderson
Abstract:
Co-evaporation of Cu-KF-In-Se was performed on substrates with varied surface Na compositions. Compositions of interest for photovoltaic absorbers were studied, with ratios of (K+Cu)/In ~ 0.85 and K/(K+Cu) ~ 0 - 0.57. Soda-lime glass (SLG) substrates led to the most Na by secondary ion mass spectrometry, while SLG/Mo and SLG/SiO2/Mo substrates led to 3x and 3,000x less Na in the growing film, resp…
▽ More
Co-evaporation of Cu-KF-In-Se was performed on substrates with varied surface Na compositions. Compositions of interest for photovoltaic absorbers were studied, with ratios of (K+Cu)/In ~ 0.85 and K/(K+Cu) ~ 0 - 0.57. Soda-lime glass (SLG) substrates led to the most Na by secondary ion mass spectrometry, while SLG/Mo and SLG/SiO2/Mo substrates led to 3x and 3,000x less Na in the growing film, respectively. Increased Na content favored Cu1-xKxInSe2 (CKIS) alloy formation by X-ray diffraction (XRD), while decreased Na favored the formation of CuInSe2 + KInSe2 mixed-phase films. Scanning electron microscopy and energy dispersive X-ray spectroscopy revealed the KInSe2 precipitates to be readily recognizable planar crystals. Extrinsic KF addition also drove diffusion of Na out from the various substrates and into the growing film, in agreement with previous reports. Time-resolved photoluminescence showed enhanced minority carrier lifetimes for films with moderate K compositions (0.04 < K/(K+Cu) < 0.14) grown on Mo. Due to the relatively high detection limit of KInSe2 by XRD and the low magnitude of chalcopyrite lattice shift for CKIS alloys with these compositions, it is unclear if the lifetime gains were associated with CKIS alloying, minor KInSe2 content, or both. The identified Na-K interdependency can be used to engineer alkali metal bonding in Cu(In,Ga)(Se,S)2 absorbers to optimize both initial and long-term photovoltaic power generation.
△ Less
Submitted 18 March, 2017;
originally announced March 2017.
-
Quantum Computing with Acceptor Spins in Silicon
Authors:
Joe Salfi,
Mengyang Tong,
Sven Rogge,
Dimitrie Culcer
Abstract:
The states of a boron acceptor near a Si/SiO2 interface, which bind two low-energy Kramers pairs, have exceptional properties for encoding quantum information and, with the aid of strain, both heavy hole and light hole-based spin qubits can be designed. Whereas a light-hole spin qubit was introduced recently [Phys. Rev. Lett. 116, 246801 (2016)], here we present analytical and numerical results pr…
▽ More
The states of a boron acceptor near a Si/SiO2 interface, which bind two low-energy Kramers pairs, have exceptional properties for encoding quantum information and, with the aid of strain, both heavy hole and light hole-based spin qubits can be designed. Whereas a light-hole spin qubit was introduced recently [Phys. Rev. Lett. 116, 246801 (2016)], here we present analytical and numerical results proving that a heavy-hole spin qubit can be reliably initialised, rotated and entangled by electrical means alone. This is due to strong Rashba-like spin-orbit interaction terms enabled by the interface inversion asymmetry. Single qubit rotations rely on electric-dipole spin resonance (EDSR), which is strongly enhanced by interface-induced spin-orbit terms. Entanglement can be accomplished by Coulomb exchange, coupling to a resonator, or spin-orbit induced dipole-dipole interactions. By analysing the qubit sensitivity to charge noise, we demonstrate that interface-induced spin-orbit terms are responsible for sweet spots in the dephasing time T2* as a function of the top gate electric field, which are close to maxima in the EDSR strength, where the EDSR gate has high fidelity. We show that both qubits can be described using the same starting Hamiltonian, and by comparing their properties we show that the complex interplay of bulk and interface-induced spin-orbit terms allows a high degree of electrical control and makes acceptors potential candidates for scalable quantum computation in Si.
△ Less
Submitted 15 June, 2016;
originally announced June 2016.
-
An integrated model for the post-solidification shape and grain morphology of fusion welds
Authors:
Anton Kidess,
Mingming Tong,
Gregory Duggan,
David J. Browne,
Saša Kenjereš,
Ian Richardson,
Chris R. Kleijn
Abstract:
Through an integrated macroscale/mesoscale computational model, we investigate the developing shape and grain morphology during the melting and solidification of a weld. In addition to macroscale surface tension driven fluid flow and heat transfer, we predict the solidification progression using a mesoscale model accounting for realistic solidification kinetics, rather than quasi-equilibrium therm…
▽ More
Through an integrated macroscale/mesoscale computational model, we investigate the developing shape and grain morphology during the melting and solidification of a weld. In addition to macroscale surface tension driven fluid flow and heat transfer, we predict the solidification progression using a mesoscale model accounting for realistic solidification kinetics, rather than quasi-equilibrium thermodynamics. The tight coupling between the macroscale and the mesoscale distinguishes our results from previously published studies. The inclusion of Marangoni driven fluid flow and heat transfer, both during heating and cooling, was found to be crucial for accurately predicting both weld pool shape and grain morphology. However, if only the shape of the weld pool is of interest, a thermodynamic quasi-equilibrium solidification model, neglecting solidification kinetics, was found to suffice when including fluid flow and heat transfer. We demonstrate that the addition of a sufficient concentration of approximately 1 $μ$m diameter TiN grain refining particles effectively triggers a favorable transition from columnar dendritic to equiaxed grains, as it allows for the latter to heterogeneously nucleate in the undercooled melt ahead of the columnar dendritic front. This transition from columnar to equiaxed growth is achievable for widely differing weld conditions, and its precise nature is relatively insensitive to the concentration of particles and to inaccurately known model parameters.
△ Less
Submitted 4 March, 2015;
originally announced March 2015.
-
Magnetic and Magnetocaloric Study of the Ferromagnetically Coupled GdF3: The Best Cryogenic Magnetic Coolant Ever
Authors:
Yan-Cong Chen,
Jun-Liang Liu,
Ming-Liang Tong
Abstract:
The magnetic susceptibility and isothermal magnetization for GdF3 were measured, and the isothermal entropy change was evaluated up to 9 T. Combining the large isotropic spin of Gd3+, the dense structure and the weak ferromagnetic interaction, an extremely large -(delta)Sm for GdF3 was observed up to 528 mJ cm-3 K-1 for (delta)H = 9 T, proving itself to be the best cryogenic magnetic coolant ever.
The magnetic susceptibility and isothermal magnetization for GdF3 were measured, and the isothermal entropy change was evaluated up to 9 T. Combining the large isotropic spin of Gd3+, the dense structure and the weak ferromagnetic interaction, an extremely large -(delta)Sm for GdF3 was observed up to 528 mJ cm-3 K-1 for (delta)H = 9 T, proving itself to be the best cryogenic magnetic coolant ever.
△ Less
Submitted 17 January, 2015;
originally announced January 2015.
-
Excellent magnetocaloric effect exhibited in the dense inorganic framework material Gd(OH)CO3
Authors:
Yan-Cong Chen,
Zhao-Sha Meng,
Lei Qin,
Yan-Zhen Zheng,
Jun-Liang Liu,
Fu-Sheng Guo,
Róbert Tarasenko,
Martin Orendáč,
Jan Prokleška,
Vladimír Sechovský,
Ming-Liang Tong
Abstract:
The excellent magnetocaloric effect of a dense inorganic framework, orthorhombic Gd(OH)CO3, is evaluated by isothermal magnetization and heat capacity measurements. The large -ΔSm, both in gravimetric and volumetric units, place it as a great candidate for cryogenic magnetic cooler.
The excellent magnetocaloric effect of a dense inorganic framework, orthorhombic Gd(OH)CO3, is evaluated by isothermal magnetization and heat capacity measurements. The large -ΔSm, both in gravimetric and volumetric units, place it as a great candidate for cryogenic magnetic cooler.
△ Less
Submitted 14 September, 2013;
originally announced September 2013.
-
Heavy doped ABA stacked trilayer graphene: triple splitting of its Raman G peak
Authors:
S. S. Lin,
B. G. Chen,
W. Xiong,
Y. Yang,
L. M. Tong,
Y. Xu,
J. Luo
Abstract:
For the first time, we have observed the obvious triple G peak splitting of ABA stacked trilayer graphene. The G peak splitting can be quantatively understood through the different electron-phonon coupling strength of Ea', Eb' and Ea" modes. In addition, the fluctuation of G peak position at different sample locations can also be understood from the view of the varied interaction strength among gr…
▽ More
For the first time, we have observed the obvious triple G peak splitting of ABA stacked trilayer graphene. The G peak splitting can be quantatively understood through the different electron-phonon coupling strength of Ea', Eb' and Ea" modes. In addition, the fluctuation of G peak position at different sample locations can also be understood from the view of the varied interaction strength among graphene layers of TLG, which is induced by nonuniform hole doping at the microscopic level.
△ Less
Submitted 12 July, 2012;
originally announced July 2012.
-
Ultrafast dynamics of surface electromagnetic waves in nanohole array on metallic film
Authors:
A. S. Kirakosyan,
M. Tong,
T. V. Shahbazyan,
Z. V. Vardeny
Abstract:
We study the ultrafast dynamics of surface electromagnetic waves photogenerated on aluminum film perforated with subwavelength holes array by means of transient photomodulation with 100 fs time resolution. We observed a pronounced blueshift of the resonant transmission band that reveals the important role of plasma attenuation in the dynamics and that is inconsistent with plasmon-polariton mecha…
▽ More
We study the ultrafast dynamics of surface electromagnetic waves photogenerated on aluminum film perforated with subwavelength holes array by means of transient photomodulation with 100 fs time resolution. We observed a pronounced blueshift of the resonant transmission band that reveals the important role of plasma attenuation in the dynamics and that is inconsistent with plasmon-polariton mechanism of extraordinary transmission. The transient photomodulation spectra were successfully modeled within the Boltzmann equation approach for the electron-phonon relaxation dynamics, involving non-equilibrium hot electrons and quasi-equilibrium phonons.
△ Less
Submitted 26 August, 2008;
originally announced August 2008.
-
Ultrafast response of surface electromagnetic waves in an aluminum film perforated with subwavelength hole arrays
Authors:
M. Tong,
A. S. Kirakosyan,
T. V. Shahbazyan,
Z. V. Vardeny
Abstract:
The ultrafast dynamics of surface electromagnetic waves photogenerated on aluminum film perforated with subwavelength holes array was studied in the visible spectral range by the technique of transient photomodulation with 100 fs time resolution. We observed a pronounced blueshift of the resonant transmission band that reveals the important role of plasma attenuation in the optical response of n…
▽ More
The ultrafast dynamics of surface electromagnetic waves photogenerated on aluminum film perforated with subwavelength holes array was studied in the visible spectral range by the technique of transient photomodulation with 100 fs time resolution. We observed a pronounced blueshift of the resonant transmission band that reveals the important role of plasma attenuation in the optical response of nanohole arrays. The blueshift is inconsistent with plasmonic mechanism of extraordinary transmission and points to the crucial role of interference in the formation of transmission bands. The transient photomodulation spectra were successfully modeled within the Boltzmann equation approach for the electron-phonon relaxation dynamics, involving non-equilibrium hot electrons and quasi-equilibrium phonons.
△ Less
Submitted 16 October, 2007;
originally announced October 2007.
