-
Antinodal kink in the band dispersion of electron-doped cuprate ${\rm La}_{2-x}{\rm Ce}_x{\rm CuO}_{4\pmδ}$
Authors:
C. Y. Tang,
Z. F. Lin,
J. X. Zhang,
X. C. Guo,
J. Y. Guan,
S. Y. Gao,
Z. C. Rao,
J. Zhao,
Y. B. Huang,
T. Qian,
Z. Y. Weng,
K. Jin,
Y. J. Sun,
H. Ding
Abstract:
Angle-resolved photoemission spectroscopy (ARPES) measurements have established the phenomenon of kink in band dispersion of high-$T_{\rm c}$ cuprate superconductors. However, systematic studies of the kink in electron-doped cuprates are still lacking experimentally. We performed $in$-$situ$ ARPES measurements on ${\rm La}_{2-x}{\rm Ce}_x{\rm CuO}_{4\pmδ}$ (LCCO) thin films over a wide electron do…
▽ More
Angle-resolved photoemission spectroscopy (ARPES) measurements have established the phenomenon of kink in band dispersion of high-$T_{\rm c}$ cuprate superconductors. However, systematic studies of the kink in electron-doped cuprates are still lacking experimentally. We performed $in$-$situ$ ARPES measurements on ${\rm La}_{2-x}{\rm Ce}_x{\rm CuO}_{4\pmδ}$ (LCCO) thin films over a wide electron doping ($n$) range from 0.05 to 0.23. While the nodal kink is nearly invisible, an antinodal kink around 45 meV, surviving above 200 K, is observed for $n\sim0.05-0.19$, whose position is roughly independent of doping. The fact that the antinodal kink observed at high temperatures and in the highly overdoped region favors the phonon mechanism with contributions from the Cu-O bond-stretching mode and the out-of-plane oxygen buckling mode. Our results also suggest that the antinodal kink of LCCO is only weakly coupled to its superconductivity.
△ Less
Submitted 25 October, 2021;
originally announced October 2021.
-
Suppression of Antiferromagnetism in Electron-Doped Cuprate $T'$-${\rm La}_{2-x}{\rm Ce}_x\rm {CuO}_{4\pmδ}$
Authors:
C. Y. Tang,
Z. F. Lin,
J. X. Zhang,
X. C. Guo,
J. Y. Guan,
S. Y. Gao,
Z. C. Rao,
J. Zhao,
Y. B. Huang,
T. Qian,
Z. Y. Weng,
K. Jin,
Y. J. Sun,
H. Ding
Abstract:
We performed systematic angle-resolved photoemission spectroscopy measurements $in$-$situ$ on $T'$-${\rm La}_{2-x}{\rm Ce}_x\rm {CuO}_{4\pmδ}$ (LCCO) thin films over the extended doping range prepared by the refined ozone/vacuum annealing method. Electron doping level ($n$), estimated from the measured Fermi surface volume, varies from 0.05 to 0.23, which covers the whole superconducting dome. We…
▽ More
We performed systematic angle-resolved photoemission spectroscopy measurements $in$-$situ$ on $T'$-${\rm La}_{2-x}{\rm Ce}_x\rm {CuO}_{4\pmδ}$ (LCCO) thin films over the extended doping range prepared by the refined ozone/vacuum annealing method. Electron doping level ($n$), estimated from the measured Fermi surface volume, varies from 0.05 to 0.23, which covers the whole superconducting dome. We observed an absence of the insulating behavior around $n \sim$ 0.05 and the Fermi surface reconstruction shifted to $n \sim$ 0.11 in LCCO compared to that of other electron-doped cuprates at around 0.15, suggesting that antiferromagnetism is strongly suppressed in this material. The possible explanation may lie in the enhanced -$t'$ /$t$ in LCCO for the largest $\rm{La^{3+}}$ ionic radius among all the Lanthanide elements.
△ Less
Submitted 10 June, 2021;
originally announced June 2021.
-
Dual topological superconducting states in the layered titanium-based oxypnictide superconductor BaTi$_2$Sb$_2$O
Authors:
Z. Huang,
W. L. Liu,
H. Y. Wang,
Y. L. Su,
Z. T. Liu,
X. B. Shi,
S. Y. Gao,
Z. C. Jiang,
Z. H. Liu,
J. S. Liu,
X. L. Lu,
Y. C. Yang,
J. X. Zhang,
S. C. Huan,
W. Xia,
J. H. Wang,
Y. S. Wu,
X. Wang,
N. Yu,
Y. B. Huang,
S. Qiao,
J. Li,
W. W. Zhao,
Y. F. Guo,
G. Li
, et al. (1 additional authors not shown)
Abstract:
Topological superconductors have long been predicted to host Majorana zero modes which obey non-Abelian statistics and have potential for realizing non-decoherence topological quantum computation. However, material realization of topological superconductors is still a challenge in condensed matter physics. Utilizing high-resolution angle-resolved photoemission spectroscopy and first-principles cal…
▽ More
Topological superconductors have long been predicted to host Majorana zero modes which obey non-Abelian statistics and have potential for realizing non-decoherence topological quantum computation. However, material realization of topological superconductors is still a challenge in condensed matter physics. Utilizing high-resolution angle-resolved photoemission spectroscopy and first-principles calculations, we predict and then unveil the coexistence of topological Dirac semimetal and topological insulator states in the vicinity of Fermi energy ($E_F$) in the titanium-based oxypnictide superconductor BaTi$_2$Sb$_2$O. Further spin-resolved measurements confirm its spin-helical surface states around $E_F$, which are topologically protected and give an opportunity for realization of Majorana zero modes and Majorana flat bands in one material. Hosting dual topological superconducting states, the intrinsic superconductor BaTi$_2$Sb$_2$O is expected to be a promising platform for further investigation of topological superconductivity.
△ Less
Submitted 14 September, 2020;
originally announced September 2020.
-
A pathway to optimize the properties of magnetocaloric MnxFe2-x(P1-yGey) for magnetic refrigeration
Authors:
D. M. Liu,
Z. L. Zhang,
S. L. Zhou,
Q. Z. Huang,
X. J. Deng,
M. Yue,
C. X. Liu,
F. X. Hu,
G. H. Rao,
B. G. Shen,
J. X. Zhang,
J. W. Lynn
Abstract:
Magnetocaloric materials can be useful in magnetic refrigeration applications, but to be practical the magneto-refrigerant needs to have a very large magnetocaloric effect (MCE) near room temperature for modest applied fields (<2 Tesla) with small hysteresis and magnetostriction, and should have a complete magnetic transition, be inexpensive, and environmentally friendly. One system that may fulfi…
▽ More
Magnetocaloric materials can be useful in magnetic refrigeration applications, but to be practical the magneto-refrigerant needs to have a very large magnetocaloric effect (MCE) near room temperature for modest applied fields (<2 Tesla) with small hysteresis and magnetostriction, and should have a complete magnetic transition, be inexpensive, and environmentally friendly. One system that may fulfill these requirements is MnxFe2-xP1-yGey, where a combined first-order structural and magnetic transition occurs between the high temperature paramagnetic and low temperature ferromagnetic phase. We have used neutron diffraction, differential scanning calorimetry, and magnetization measurements to study the effects of Mn and Ge location in the structure on the ordered magnetic moment, MCE, and hysteresis for a series of compositions of the system near optimal doping. The diffraction results indicate that the Mn ions located on the 3f site enhance the desirable properties, while those located on the 3g sites are detrimental. The entropy changes measured directly by calorimetry can exceed 40 J/kg-K. The phase fraction that transforms, hysteresis of the transition, and entropy change can be controlled by both the compositional homogeneity and the particle size, and an annealing procedure has been developed that substantially improves the performance of all three properties of the material. On the basis of these results we have identified a pathway to optimize the MCE properties of this system for magnetic refrigeration applications.
△ Less
Submitted 28 August, 2014;
originally announced August 2014.
-
Magnetic domain-wall motion twisted by nanoscale probe-induced spin transfer
Authors:
J. Wang,
L. S. Xie,
C. S. Wang,
H. Z. Zhang,
L. Shu,
J. Bai,
Y. S. Chai,
X. Zhao,
J. C. Nie,
C. B. Cao,
C. Z. Gu,
C. M. Xiong,
Y. Sun,
J. Shi,
S. Salahuddin,
K. Xia,
C. W. Nan,
J. X. Zhang
Abstract:
A method for deterministic control of the magnetic order parameter using an electrical stimulus is highly desired for the new generation of spintronic and magnetoelectronic devices. Much effort has been focused on magnetic domain-wall motion manipulated by a successive injection of spin-polarized current into a magnetic nanostructure. However, an integrant high-threshold current density of 107~108…
▽ More
A method for deterministic control of the magnetic order parameter using an electrical stimulus is highly desired for the new generation of spintronic and magnetoelectronic devices. Much effort has been focused on magnetic domain-wall motion manipulated by a successive injection of spin-polarized current into a magnetic nanostructure. However, an integrant high-threshold current density of 107~108 A/cm2 inhibits the integration of those nanostructures with low-energy-cost technology. In addition, a precise determination of the location of domain walls at nanoscale seems difficult in artificially manufactured nanostructures. Here we report an approach to manipulate a single magnetic domain wall with a perpendicular anisotropy in a manganite/dielectric/metal capacitor using a probe-induced spin displacement. A spin angular momentum transfer torque occurs in the strongly correlated manganite film during the spin injection into the capacitor from the nanoscale magnetized tip with an ultralow voltage of 0.1 V, where the threshold spin-polarized current density is ~104 A/cm2 at the tip/manganite interface. The probe-voltage-controlled domain wall motion in the capacitor demonstrates a critical framework for the fundamental understanding of the manipulation of the nano-magnet systems with low energy consumption.
△ Less
Submitted 10 July, 2014;
originally announced July 2014.
-
Kondo hybridisation and the origin of metallic states at the (001) surface of SmB6
Authors:
E. Frantzeskakis,
N. de Jong,
B. Zwartsenberg,
Y. K. Huang,
Y. Pan,
X. Zhang,
J. X. Zhang,
F. X. Zhang,
L. H. Bao,
O. Tegus,
A. Varykhalov,
A. de Visser,
M. S. Golden
Abstract:
SmB6, a well-known Kondo insulator, has been proposed to be an ideal topological insulator with states of topological character located in a clean, bulk electronic gap, namely the Kondo hybridisation gap. Seeing as the Kondo gap arises from many body electronic correlations, this would place SmB6 at the head of a new material class: topological Kondo insulators. Here, for the first time, we show t…
▽ More
SmB6, a well-known Kondo insulator, has been proposed to be an ideal topological insulator with states of topological character located in a clean, bulk electronic gap, namely the Kondo hybridisation gap. Seeing as the Kondo gap arises from many body electronic correlations, this would place SmB6 at the head of a new material class: topological Kondo insulators. Here, for the first time, we show that the k-space characteristics of the Kondo hybridisation process is the key to unravelling the origin of the two types of metallic states observed directly by ARPES in the electronic band structure of SmB6(001). One group of these states is essentially of bulk origin, and cuts the Fermi level due to the position of the chemical potential 20 meV above the lowest lying 5d-4f hybridisation zone. The other metallic state is more enigmatic, being weak in intensity, but represents a good candidate for a topological surface state. However, before this claim can be substantiated by an unequivocal measurement of its massless dispersion relation, our data raises the bar in terms of the ARPES resolution required, as we show there to be a strong renormalisation of the hybridisation gaps by a factor 2-3 compared to theory, following from the knowledge of the true position of the chemical potential and a careful comparison with the predictions from recent LDA+Gutzwiler calculations. All in all, these key pieces of evidence act as triangulation markers, providing a detailed description of the electronic landscape in SmB6, pointing the way for future, ultrahigh resolution ARPES experiments to achieve a direct measurement of the Dirac cones in the first topological Kondo insulator.
△ Less
Submitted 13 December, 2013; v1 submitted 1 August, 2013;
originally announced August 2013.
-
New insight into kinetics behavor of the structural formation process in Agar gelation
Authors:
Y. Z. Wang,
X. F. Zhang,
J. X. Zhang
Abstract:
A time-resolved experimental study on the kinetics and relaxation of the structural formation process in gelling Agar-water solutions was carried out using our custom-built torsion resonator. The study was based on measurements of three naturally cooled solutions with agar concentrations of 0.75%, 1.0% and 2.0% w/w. It was found that the natural-cooling agar gelation process could be divided into…
▽ More
A time-resolved experimental study on the kinetics and relaxation of the structural formation process in gelling Agar-water solutions was carried out using our custom-built torsion resonator. The study was based on measurements of three naturally cooled solutions with agar concentrations of 0.75%, 1.0% and 2.0% w/w. It was found that the natural-cooling agar gelation process could be divided into three stages, sol stage (Stage I), gelation zone (Stage II) and gel stage (Stage III), based on the time/temperature evolutions of the structural development rate (SDR). An interesting fluctuant decaying behavior of SDR was observed in Stage II and III, indicative of a sum of multiple relaxation processes and well described by a multiple-order Gaussisn-like equation: . More interestingly, the temperature dependences of the fitted values of Wn in Stage II and Stage III were found to follow the different Arrhenius laws, with different activation energies of EaII= 39-74 KJ/mol and EaIII~7.0 KJ/mol. The two different Arrhenius-like behaviors respectively suggest that dispersions in Stage II be attributed to the relaxation of the self-assembly of agar molecules or the growth of junction zones en route to gelation, in which the formation or fission of hydrogen bonding interactions plays an important role; and that dispersions in Stage III be attributed to the relaxation dynamics of water released from various size domains close to the domain of the viscous flow of water during the syneresis process.
△ Less
Submitted 24 July, 2011; v1 submitted 20 July, 2011;
originally announced July 2011.
-
Temperature, magnetic field, and pressure dependence of the crystal and magnetic structures of the magnetocaloric compound Mn1.1Fe0.9(P0.8Ge0.2)
Authors:
D. M. Liu,
Q. Huang,
M. Yue,
J. W. Lynn,
L. J. Liu,
Y. Chen,
Z. H. Wu,
J. X. Zhang
Abstract:
Neutron powder diffraction studies of the crystal and magnetic structures of the magnetocaloric compound Mn1.1Fe0.9(P0.8Ge0.2) have been carried out as a function of temperature, applied magnetic field, and pressure. The data reveal that there is only one transition observed over the entire range of variables explored, which is a combined magnetic and structural transformation between the parama…
▽ More
Neutron powder diffraction studies of the crystal and magnetic structures of the magnetocaloric compound Mn1.1Fe0.9(P0.8Ge0.2) have been carried out as a function of temperature, applied magnetic field, and pressure. The data reveal that there is only one transition observed over the entire range of variables explored, which is a combined magnetic and structural transformation between the paramagnetic to ferromagnetic phases (Tc~255 K for this composition). The structural part of the transition is associated with an expansion of the hexagonal unit cell in the direction of the a- and b-axes and a contraction of the c-axis as the FM phase is formed, which originates from an increase in the intra-layer metal-metal bond distance. The application of pressure is found to have an adverse effect on the formation of the FM phase since pressure opposes the expansion of the lattice and hence decreases Tc. The application of a magnetic field, on the other hand, has the expected effect of enhancing the FM phase and increasing Tc. We find that the substantial range of temperature/field/pressure coexistence of the PM and FM phases observed is due to compositional variations in the sample. In-situ high temperature diffraction measurements were carried out to explore this issue, and reveal a coexisting liquid phase at high temperatures that is the origin of this variation. We show that this range of coexisting phases can be substantially reduced by appropriate heat treatment to improve the sample homogeneity.
△ Less
Submitted 16 July, 2009; v1 submitted 27 April, 2009;
originally announced April 2009.