Showing 1–50 of 63 results for author: Guvenc, I

Energy-Efficient Sleep Mode Optimization of 5G mmWave Networks Using Deep Contextual MAB

Authors: Saad Masrur, Ismail Guvenc, David Lopez-Perez

Abstract: Millimeter-wave (mmWave) networks, integral to 5G communication, offer a vast spectrum that addresses the issue of spectrum scarcity and enhances peak rate and capacity. However, their dense deployment, necessary to counteract propagation losses, leads to high power consumption. An effective strategy to reduce this energy consumption in mobile networks is the sleep mode optimization (SMO) of base… ▽ More Millimeter-wave (mmWave) networks, integral to 5G communication, offer a vast spectrum that addresses the issue of spectrum scarcity and enhances peak rate and capacity. However, their dense deployment, necessary to counteract propagation losses, leads to high power consumption. An effective strategy to reduce this energy consumption in mobile networks is the sleep mode optimization (SMO) of base stations (BSs). In this paper, we propose a novel SMO approach for mmWave BSs in a 3D urban environment. This approach, which incorporates a neural network (NN) based contextual multi-armed bandit (C-MAB) with an epsilon decay algorithm, accommodates the dynamic and diverse traffic of user equipment (UE) by clustering the UEs in their respective tracking areas (TAs). Our strategy includes beamforming, which helps reduce energy consumption from the UE side, while SMO minimizes energy use from the BS perspective. We extended our investigation to include Random, Epsilon Greedy, Upper Confidence Bound (UCB), and Load Based sleep mode (SM) strategies. We compared the performance of our proposed C-MAB based SM algorithm with those of All On and other alternative approaches. Simulation results show that our proposed method outperforms all other SM strategies in terms of the $10^{th}$ percentile of user rate and average throughput while demonstrating comparable average throughput to the All On approach. Importantly, it outperforms all approaches in terms of energy efficiency (EE). △ Less

Submitted 15 May, 2024; originally announced May 2024.

Digital Twins for Supporting AI Research with Autonomous Vehicle Networks

Authors: Anıl Gürses, Gautham Reddy, Saad Masrur, Özgür Özdemir, İsmail Güvenç, Mihail L. Sichitiu, Alphan Şahin, Ahmed Alkhateeb, Rudra Dutta

Abstract: Digital twins (DTs), which are virtual environments that simulate, predict, and optimize the performance of their physical counterparts, are envisioned to be essential technologies for advancing next-generation wireless networks. While DTs have been studied extensively for wireless networks, their use in conjunction with autonomous vehicles with programmable mobility remains relatively under-explo… ▽ More Digital twins (DTs), which are virtual environments that simulate, predict, and optimize the performance of their physical counterparts, are envisioned to be essential technologies for advancing next-generation wireless networks. While DTs have been studied extensively for wireless networks, their use in conjunction with autonomous vehicles with programmable mobility remains relatively under-explored. In this paper, we study DTs used as a development environment to design, deploy, and test artificial intelligence (AI) techniques that use real-time observations, e.g. radio key performance indicators, for vehicle trajectory and network optimization decisions in an autonomous vehicle networks (AVN). We first compare and contrast the use of simulation, digital twin (software in the loop (SITL)), sandbox (hardware-in-the-loop (HITL)), and physical testbed environments for their suitability in developing and testing AI algorithms for AVNs. We then review various representative use cases of DTs for AVN scenarios. Finally, we provide an example from the NSF AERPAW platform where a DT is used to develop and test AI-aided solutions for autonomous unmanned aerial vehicles for localizing a signal source based solely on link quality measurements. Our results in the physical testbed show that SITL DTs, when supplemented with data from real-world (RW) measurements and simulations, can serve as an ideal environment for developing and testing innovative AI solutions for AVNs. △ Less

Submitted 1 April, 2024; originally announced April 2024.

Comments: 7 pages, 6 figures, Submitted to IEEE Communications Magazine

Heterogeneous Drone Small Cells: Optimal 3D Placement for Downlink Power Efficiency and Rate Satisfaction

Authors: Nima Namvar, Fatemeh Afghah, Ismail Guvenc

Abstract: In this paper, we consider a heterogeneous repository of drone-enabled aerial base stations with varying transmit powers that provide downlink wireless coverage for ground users. One particular challenge is optimal selection and deployment of a subset of available drone base stations (DBSs) to satisfy the downlink data rate requirements while minimizing the overall power consumption. In order to a… ▽ More In this paper, we consider a heterogeneous repository of drone-enabled aerial base stations with varying transmit powers that provide downlink wireless coverage for ground users. One particular challenge is optimal selection and deployment of a subset of available drone base stations (DBSs) to satisfy the downlink data rate requirements while minimizing the overall power consumption. In order to address this challenge, we formulate an optimization problem to select the best subset of available DBSs so as to guarantee wireless coverage with some acceptable transmission rate in the downlink path. In addition to the selection of DBSs, we determine their 3D position so as to minimize their overall power consumption. Moreover, assuming that the DBSs operate in the same frequency band, we develop a novel and computationally efficient beamforming method to alleviate the inter-cell interference impact on the downlink. We propose a Kalai-Smorodinsky bargaining solution to determine the optimal beamforming strategy in the downlink path to compensate for the impairment caused by the interference. Simulation results demonstrate the effectiveness of the proposed solution and provide valuable insights into the performance of the heterogeneous drone-based small cell networks. △ Less

Submitted 28 August, 2023; originally announced August 2023.

Comments: 12 pages, 7 figures. arXiv admin note: text overlap with arXiv:1804.08415 by other authors

Joint Path planning and Power Allocation of a Cellular-Connected UAV using Apprenticeship Learning via Deep Inverse Reinforcement Learning

Authors: Alireza Shamsoshoara, Fatemeh Lotfi, Sajad Mousavi, Fatemeh Afghah, Ismail Guvenc

Abstract: This paper investigates an interference-aware joint path planning and power allocation mechanism for a cellular-connected unmanned aerial vehicle (UAV) in a sparse suburban environment. The UAV's goal is to fly from an initial point and reach a destination point by moving along the cells to guarantee the required quality of service (QoS). In particular, the UAV aims to maximize its uplink throughp… ▽ More This paper investigates an interference-aware joint path planning and power allocation mechanism for a cellular-connected unmanned aerial vehicle (UAV) in a sparse suburban environment. The UAV's goal is to fly from an initial point and reach a destination point by moving along the cells to guarantee the required quality of service (QoS). In particular, the UAV aims to maximize its uplink throughput and minimize the level of interference to the ground user equipment (UEs) connected to the neighbor cellular BSs, considering the shortest path and flight resource limitation. Expert knowledge is used to experience the scenario and define the desired behavior for the sake of the agent (i.e., UAV) training. To solve the problem, an apprenticeship learning method is utilized via inverse reinforcement learning (IRL) based on both Q-learning and deep reinforcement learning (DRL). The performance of this method is compared to learning from a demonstration technique called behavioral cloning (BC) using a supervised learning approach. Simulation and numerical results show that the proposed approach can achieve expert-level performance. We also demonstrate that, unlike the BC technique, the performance of our proposed approach does not degrade in unseen situations. △ Less

Submitted 15 June, 2023; originally announced June 2023.

Optimizing Energy-Harvesting Hybrid VLC/RF Networks with Random Receiver Orientation

Authors: Amir Hossein Fahim Raouf, Chethan Kumar Anjinappa, Ismail Guvenc

Abstract: In this paper, we consider an indoor hybrid visible light communication (VLC) and radio frequency (RF) communication scenario with two-hop downlink transmission. The LED carries both data and energy in the first phase, VLC, to an energy harvester relay node, which then uses the harvested energy to re-transmit the decoded information to the RF user in the second phase, RF communication. The direct… ▽ More In this paper, we consider an indoor hybrid visible light communication (VLC) and radio frequency (RF) communication scenario with two-hop downlink transmission. The LED carries both data and energy in the first phase, VLC, to an energy harvester relay node, which then uses the harvested energy to re-transmit the decoded information to the RF user in the second phase, RF communication. The direct current (DC) bias and the assigned time duration for VLC transmission are taken into account as design parameters. The optimization problem is formulated to maximize the data rate with the assumption of decode-and-forward relaying for fixed receiver orientation. The non-convex optimization is split into two sub-problems and solved cyclically. It optimizes the data rate by solving two sub-problems: fixing time duration for VLC link to solve DC bias and fixing DC bias to solve time duration. The effect of random receiver orientation on the data rate is also studied, and closed-form expressions for both VLC and RF data rates are derived. The optimization is solved through an exhaustive search, and the results show that a higher data rate can be achieved by solving the joint problem of DC bias and time duration compared to solely optimizing the DC bias. △ Less

Submitted 4 October, 2023; v1 submitted 6 February, 2023; originally announced February 2023.

Open RAN Testbeds with Controlled Air Mobility

Authors: Magreth Mushi, Yuchen Liu, Shreyas Sreenivasa, Ozgur Ozdemir, Ismail Guvenc, Mihail Sichitiu, Rudra Dutta, Russ Gyurek

Abstract: With its promise of increasing softwarization, improving disaggregability, and creating an open-source based ecosystem in the area of Radio Access Networks, the idea of Open RAN has generated rising interest in the community. Even as the community races to provide and verify complete Open RAN systems, the importance of verification of systems based on Open RAN under real-world conditions has becom… ▽ More With its promise of increasing softwarization, improving disaggregability, and creating an open-source based ecosystem in the area of Radio Access Networks, the idea of Open RAN has generated rising interest in the community. Even as the community races to provide and verify complete Open RAN systems, the importance of verification of systems based on Open RAN under real-world conditions has become clear, and testbed facilities for general use have been envisioned, in addition to private testing facilities. Aerial robots, including autonomous ones, are among the increasingly important and interesting clients of RAN systems, but also present a challenge for testbeds. Based on our experience in architecting and operating an advanced wireless testbed with aerial robots as a primary citizen, we present considerations relevant to the design of Open RAN testbeds, with particular attention to making such a testbed capable of controlled experimentation with aerial clients. We also present representative results from the NSF AERPAW testbed on Open RAN slicing, programmable vehicles, and programmable radios. △ Less

Submitted 26 January, 2023; originally announced January 2023.

Optimal Design of Energy-Harvesting Hybrid VLC-RF Networks

Authors: Amir Hossein Fahim Raouf, Chethan Kumar Anjinappa, Ismail Guvenc

Abstract: In this paper, we consider an indoor downlink dual-hop hybrid visible light communication (VLC)/radio frequency (RF) scenario. For each transmission block, we dynamically allocate a portion of time resources to VLC and the other portion to RF transmission. In the first phase (i.e., VLC transmission), the LED carries both data and energy to an energy harvester relay node. In the second phase (i.e.,… ▽ More In this paper, we consider an indoor downlink dual-hop hybrid visible light communication (VLC)/radio frequency (RF) scenario. For each transmission block, we dynamically allocate a portion of time resources to VLC and the other portion to RF transmission. In the first phase (i.e., VLC transmission), the LED carries both data and energy to an energy harvester relay node. In the second phase (i.e., RF communication), the relay utilizes the harvested energy to re-transmit the decoded information to the far RF user. During this phase, the LED continues to transmit power (no information) to the relay node, aiming to harvest energy that can be used in the next transmission block. We formulate the optimization problem in the sense of maximizing the data rate under the assumption of decode-and-forward (DF) relaying. As the design parameters, the direct current (DC) bias and the assigned time duration for VLC transmission are taken into account. In particular, the joint non-convex optimization is split into two sub-problems, which are then cyclically solved. In the first sub-problem, we fix the assigned time duration to VLC link and utilize the majorization-minimization (MM) procedure to solve the non-convex DC bias problem. In the second sub-problem, we fix the DC bias obtained in the previous step and solve the optimization problem for the assigned VLC link time duration. Our results demonstrate that a higher data rate can be achieved by solving the joint problem of DC bias and time duration compared to solely optimizing the DC bias. △ Less

Submitted 19 November, 2022; v1 submitted 9 June, 2022; originally announced June 2022.

Intelligent Feedback Overhead Reduction (iFOR) in Wi-Fi 7 and Beyond

Authors: Mrugen Deshmukh, Zinan Lin, Hanqing Lou, Mahmoud Kamel, Rui Yang, Ismail Guvenc

Abstract: The IEEE 802.11 standard based wireless local area networks (WLANs) or Wi-Fi networks are critical to provide internet access in today's world. The increasing demand for high data rate in Wi-Fi networks has led to several advancements in the 802.11 standard. Supporting MIMO transmissions with higher number of transmit antennas operating on wider bandwidths is one of the key capabilities for reachi… ▽ More The IEEE 802.11 standard based wireless local area networks (WLANs) or Wi-Fi networks are critical to provide internet access in today's world. The increasing demand for high data rate in Wi-Fi networks has led to several advancements in the 802.11 standard. Supporting MIMO transmissions with higher number of transmit antennas operating on wider bandwidths is one of the key capabilities for reaching higher throughput. However, the increase in sounding feedback overhead due to higher number of transmit antennas may significantly curb the throughput gain. In this paper, we develop an unsupervised learning-based method to reduce the sounding duration in a Wi-Fi MIMO link. Simulation results show that our method uses approximately only 8% of the number of bits required by the existing feedback mechanism and it can boost the system throughput by up to 52%. △ Less

Submitted 8 March, 2022; originally announced March 2022.

Coverage Hole Detection for mmWave Networks: An Unsupervised Learning Approach

Authors: Chethan K. Anjinappa, Ismail Guvenc

Abstract: The utilization of millimeter-wave (mmWave) bands in 5G networks poses new challenges to network planning. Vulnerability to blockages at mmWave bands can cause coverage holes (CHs) in the radio environment, leading to radio link failure when a user enters these CHs. Detection of the CHs carries critical importance so that necessary remedies can be introduced to improve coverage. In this letter, we… ▽ More The utilization of millimeter-wave (mmWave) bands in 5G networks poses new challenges to network planning. Vulnerability to blockages at mmWave bands can cause coverage holes (CHs) in the radio environment, leading to radio link failure when a user enters these CHs. Detection of the CHs carries critical importance so that necessary remedies can be introduced to improve coverage. In this letter, we propose a novel approach to identify the CHs in an unsupervised fashion using a state-of-the-art manifold learning technique: uniform manifold approximation and projection. The key idea is to preserve the local-connectedness structure inherent in the collected unlabelled channel samples, such that the CHs from the service area are detectable. Our results on the DeepMIMO dataset scenario demonstrate that the proposed method can learn the structure within the data samples and provide visual holes in the low-dimensional embedding while preserving the CH boundaries. Once the CH boundary is determined in the low-dimensional embedding, channel-based localization techniques can be applied to these samples to obtain the geographical boundaries of the CHs. △ Less

Submitted 21 August, 2021; v1 submitted 17 August, 2021; originally announced August 2021.

Comments: This paper appears in: IEEE Communications Letters

Coverage Analysis of Cellular-Connected UAV Communications with 3GPP Antenna and Channel Models

Authors: Zhuangzhuang Cui, Ke Guan, İsmail Güvenç, Claude Oestges, Zhangdui Zhong

Abstract: For reliable and efficient communications of aerial platforms, such as unmanned aerial vehicles (UAVs), the cellular network is envisioned to provide connectivity for the aerial and ground user equipment (GUE) simultaneously, which brings challenges to the existing pattern of the base station (BS) tailored for ground-level services. Thus, we focus on the coverage probability analysis to investigat… ▽ More For reliable and efficient communications of aerial platforms, such as unmanned aerial vehicles (UAVs), the cellular network is envisioned to provide connectivity for the aerial and ground user equipment (GUE) simultaneously, which brings challenges to the existing pattern of the base station (BS) tailored for ground-level services. Thus, we focus on the coverage probability analysis to investigate the coexistence of aerial and terrestrial users, by employing realistic antenna and channel models reported in the 3rd Generation Partnership Project (3GPP). The homogeneous Poisson point process (PPP) is used to describe the BS distribution, and the BS antenna is adjustable in the down-tilted angle and the number of the antenna array. Meantime, omnidirectional antennas are used for cellular users. We first derive the approximation of coverage probability and then conduct numerous simulations to evaluate the impacts of antenna numbers, down-tilted angles, carrier frequencies, and user heights. One of the essential findings indicates that the coverage probabilities of high-altitude users become less sensitive to the down-tilted angle. Moreover, we found that the aerial user equipment (AUE) in a certain range of heights can achieve the same or better coverage probability than that of GUE, which provides an insight into the effective deployment of cellular-connected aerial communications. △ Less

Submitted 28 May, 2021; originally announced May 2021.

Energy Harvesting in Unmanned Aerial Vehicle Networks with 3D Antenna Radiation Patterns

Authors: Esma Turgut, M. Cenk Gursoy, Ismail Guvenc

Abstract: In this paper, an analytical framework is provided to analyze the energy coverage performance of unmanned aerial vehicle (UAV) energy harvesting networks with clustered user equipments (UEs). Locations of UEs are modeled as a Poisson Cluster Process (PCP), and UAVs are assumed to be located at a certain height above the center of user clusters. Hence, user-centric UAV deployments are addressed. Tw… ▽ More In this paper, an analytical framework is provided to analyze the energy coverage performance of unmanned aerial vehicle (UAV) energy harvesting networks with clustered user equipments (UEs). Locations of UEs are modeled as a Poisson Cluster Process (PCP), and UAVs are assumed to be located at a certain height above the center of user clusters. Hence, user-centric UAV deployments are addressed. Two different models are considered for the line-of-sight (LOS) probability function to compare their effects on the network performance. Moreover, antennas with doughnut-shaped radiation patterns are employed at both UAVs and UEs, and the impact of practical 3D antenna radiation patterns on the network performance is also investigated. Initially, the path loss of each tier is statistically described by deriving the complementary cumulative distribution function and probability density function. Following this, association probabilities with each tier are determined, and energy coverage probability of the UAV network is characterized in terms of key system and network parameters for UAV deployments both at a single height level and more generally at multiple heights. Through numerical results, we have shown that cluster size and UAV height play crucial roles on the energy coverage performance. Furthermore, energy coverage probability is significantly affected by the antenna orientation and number of UAVs in the network. △ Less

Submitted 16 July, 2020; originally announced July 2020.

Software Radios for Unmanned Aerial Systems

Authors: Keith Powell, Aly Sabri, Daniel Brennan, Vuk Marojevic, R. Michael Barts, Ashwin Panicker, Ozgur Ozdemir, Ismail Guvenc

Abstract: As new use cases are emerging for unmanned aerial systems (UAS), advanced wireless communications technologies and systems need to be implemented and widely tested. This requires a flexible platform for development, deployment, testing and demonstration of wireless systems with ground and aerial nodes, enabling effective 3D mobile communications and networking. In this paper, we provide a comparat… ▽ More As new use cases are emerging for unmanned aerial systems (UAS), advanced wireless communications technologies and systems need to be implemented and widely tested. This requires a flexible platform for development, deployment, testing and demonstration of wireless systems with ground and aerial nodes, enabling effective 3D mobile communications and networking. In this paper, we provide a comparative overview of software-defined radios (SDRs), with a specific focus on SDR hardware and software that can be used for aerial wireless experimentation and research. We discuss SDR hardware requirements, features of available SDR hardware that can be suitable for small UAS, and power measurements carried out with a subset of these SDR hardware. We also present SDR software requirements, available open-source SDR software, and calibration/benchmarking of SDR software. As a case study, we present AERPAW: Aerial Experimentation and Research Platform for Advanced Wireless, and discuss various different experiments that can be supported in that platform using SDRs, for verification/testing of future wireless innovations, protocols, and technologies. △ Less

Submitted 20 May, 2020; v1 submitted 4 April, 2020; originally announced April 2020.

Precoder Design for mmWave UAV Communications with Physical Layer Security

Authors: Sung Joon Maeng, Yavuz Yapıcı, İsmail Güvenç, Huaiyu Dai, Arupjyoti Bhuyan

Abstract: The integration of unmanned aerial vehicles (UAVs) into the terrestrial cellular networks is envisioned as one key technology for next-generation wireless communications. In this work, we consider the physical layer security of the communications links in the millimeter-wave (mmWave) spectrum which are maintained by UAVs functioning as base stations (BS). In particular, we propose a new precoding… ▽ More The integration of unmanned aerial vehicles (UAVs) into the terrestrial cellular networks is envisioned as one key technology for next-generation wireless communications. In this work, we consider the physical layer security of the communications links in the millimeter-wave (mmWave) spectrum which are maintained by UAVs functioning as base stations (BS). In particular, we propose a new precoding strategy which incorporates the channel state information (CSI) of the eavesdropper (Eve) compromising link security. We show that our proposed precoder strategy eliminates any need for artificial noise (AN) transmission in underloaded scenarios (fewer users than number of antennas). In addition, we demonstrate that our nonlinear precoding scheme provides promising secrecy-rate performance even for overloaded scenarios at the expense of transmitting low-power AN. △ Less

Submitted 16 February, 2020; originally announced February 2020.

Physical Layer Security for NOMA Transmission in mmWave Drone Networks

Authors: Yavuz Yapici, Nadisanka Rupasinghe, Ismail Guvenc, Huaiyu Dai, Arupjyoti Bhuyan

Abstract: The non-orthogonal multiple access (NOMA) and millimeter-wave (mmWave) transmission enable the unmanned aerial vehicle (UAV) assisted wireless networks to provide broadband connectivity over densely packed urban areas. The presence of malicious receivers, however, compromise the security of the UAV-to-ground communications link, thereby degrading secrecy rates. In this work, we consider a NOMA-bas… ▽ More The non-orthogonal multiple access (NOMA) and millimeter-wave (mmWave) transmission enable the unmanned aerial vehicle (UAV) assisted wireless networks to provide broadband connectivity over densely packed urban areas. The presence of malicious receivers, however, compromise the security of the UAV-to-ground communications link, thereby degrading secrecy rates. In this work, we consider a NOMA-based transmission strategy in a mmWave UAV-assisted wireless network, and investigate the respective secrecy-rate performance rigorously. In particular, we propose a protected-zone approach to enhance the secrecy-rate performance by preventing the most vulnerable subregion (outside the user region) from the presence of malicious receivers. The respective secrecy rates are then derived analytically as a function of the protected zone, which verifies great secrecy rate improvements through optimizing shape of the protected zone in use. Furthermore, we show that the optimal protected zone shape for mmWave links appears as a compromise between protecting the angle versus distance dimension, which would otherwise form to protect solely the distance dimension for sub-6GHz links. We also numerically evaluate the impact of transmission power, protected-zone size, and UAV altitude on the secrecy-rate performance improvements as practical considerations. △ Less

Submitted 3 December, 2020; v1 submitted 14 January, 2020; originally announced January 2020.

Heuristic Approach for Jointly Optimizing FeICIC and UAV Locations in Multi-Tier LTE-Advanced Public Safety HetNet

Authors: Abhaykumar Kumbhar, Hamidullah Binol, Simran Singh, Ismail Guvenc, Kemal Akkaya

Abstract: UAV enabled communications and networking can enhance wireless connectivity and support emerging services. However, this would require system-level understanding to modify and extend the existing terrestrial network infrastructure. In this paper, we integrate UAVs both as user equipment and base stations into existing LTE-Advanced heterogeneous network (HetNet) and provide system-level insights of… ▽ More UAV enabled communications and networking can enhance wireless connectivity and support emerging services. However, this would require system-level understanding to modify and extend the existing terrestrial network infrastructure. In this paper, we integrate UAVs both as user equipment and base stations into existing LTE-Advanced heterogeneous network (HetNet) and provide system-level insights of this three-tier LTE-Advanced air-ground HetNet (AG-HetNet). This AG-HetNet leverages cell range expansion (CRE), ICIC, 3D beamforming, and enhanced support for UAVs. Using system-level understanding and through brute-force technique and heuristics algorithms, we evaluate the performance of AG-HetNet in terms of fifth percentile spectral efficiency (5pSE) and coverage probability. We compare 5pSE and coverage probability, when aerial base-stations (UABS) are deployed on a fixed hexagonal grid and when their locations are optimized using genetic algorithm (GA) and elitist harmony search algorithm based on genetic algorithm (eHSGA). Our simulation results show the heuristic algorithms outperform the brute-force technique and achieve better peak values of coverage probability and 5pSE. Simulation results also show that trade-off exists between peak values and computation time when using heuristic algorithms. Furthermore, the three-tier hierarchical structuring of FeICIC provides considerably better 5pSE and coverage probability than eICIC. △ Less

Submitted 7 December, 2019; originally announced January 2020.

Comments: Submitted at IET Cyber-Systems and Robotics

Low-Resolution Limited-Feedback NOMA for mmWave Communications

Authors: Yavuz Yapici, Ismail Guvenc, Huaiyu Dai

Abstract: The spectrum-efficient millimeter-wave (mmWave) communications has recently attracted much attention as a viable solution to spectrum crunch problem. In this work, we propose a novel non-orthogonal multiple access (NOMA) framework, which makes use of the directional propagation characteristics of mmWave communications so as to improve the spectral efficiency through non-orthogonal signaling. In pa… ▽ More The spectrum-efficient millimeter-wave (mmWave) communications has recently attracted much attention as a viable solution to spectrum crunch problem. In this work, we propose a novel non-orthogonal multiple access (NOMA) framework, which makes use of the directional propagation characteristics of mmWave communications so as to improve the spectral efficiency through non-orthogonal signaling. In particular, we consider one-bit quantized angle information as a limited yet effective feedback scheme describing the channel quality of user equipment (UE) in mmWave bands. The UE pairs for NOMA transmission are then established using not only the one-bit distance feedback as a classical approach, but also the one-bit angle feedback. The proposed strategy is therefore referred to as two-bit NOMA. We also propose a novel hybrid strategy, called combined NOMA, for the circumstances with no UE pair through two-bit NOMA. Whenever no UE pair is available through any NOMA strategy, we resort to single user transmission (SUT) with proper UE selection schemes. The hybrid sum-rate performance is also analyzed thoroughly with the respective outage and rate expressions. The numerical results verify that the proposed strategy outperforms one-bit NOMA schemes with either angle- or distance-only feedback. △ Less

Submitted 1 October, 2019; originally announced October 2019.

Dynamic Interference Management for UAV-Assisted Wireless Networks

Authors: Ali Rahmati, Seyyedali Hosseinalipour, Yavuz Yapici, Xiaofan He, Ismail Guvenc, Huaiyu Dai, Arupjyoti Bhuyan

Abstract: The deployment of unmanned aerial vehicles (UAVs) is proliferating as they are effective, flexible and cost-efficient devices for a variety of applications ranging from natural disaster recovery to delivery of goods. We investigate a transmission mechanism aiming to improve the data rate between a base station (BS) and a user equipment through deploying multiple relaying UAVs. We consider the effe… ▽ More The deployment of unmanned aerial vehicles (UAVs) is proliferating as they are effective, flexible and cost-efficient devices for a variety of applications ranging from natural disaster recovery to delivery of goods. We investigate a transmission mechanism aiming to improve the data rate between a base station (BS) and a user equipment through deploying multiple relaying UAVs. We consider the effect of interference, which is incurred by the nodes of another established communication network. Our primary goal is to design the 3D trajectories and power allocation for the UAVs to maximize the data flow while the interference constraint is met. The UAVs can reconfigure their locations to evade the unintended/intended interference caused by reckless/smart interferers. We also consider the scenario in which smart jammers chase the UAVs to degrade the communication quality. In this case, we investigate the problem from the perspective of both UAV network and smart jammers. An alternating-maximization approach is proposed to address the joint 3D trajectory design and power allocation problem. We handle the 3D trajectory design by resorting to spectral graph theory and subsequently address the power allocation through convex optimization techniques. Finally, we demonstrate the efficacy of our proposed method through simulations. △ Less

Submitted 26 September, 2019; originally announced September 2019.

Comments: 12 pages, 13 figures. arXiv admin note: substantial text overlap with arXiv:1904.07781

Interference Avoidance in UAV-Assisted Networks: Joint 3D Trajectory Design and Power Allocation

Authors: Ali Rahmati, Seyyedali Hosseinalipour, Yavuz Yapici, Xiaofan He, Ismail Guvenc, Huaiyu Dai, Arupjyoti Bhuyan

Abstract: The use of the unmanned aerial vehicle (UAV) has been foreseen as a promising technology for the next generation communication networks. Since there are no regulations for UAVs deployment yet, most likely they form a network in coexistence with an already existed network. In this work, we consider a transmission mechanism that aims to improve the data rate between a terrestrial base station (BS) a… ▽ More The use of the unmanned aerial vehicle (UAV) has been foreseen as a promising technology for the next generation communication networks. Since there are no regulations for UAVs deployment yet, most likely they form a network in coexistence with an already existed network. In this work, we consider a transmission mechanism that aims to improve the data rate between a terrestrial base station (BS) and user equipment (UE) through deploying multiple UAVs relaying the desired data flow. Considering the coexistence of this network with other established communication networks, we take into account the effect of interference, which is incurred by the existing nodes. Our primary goal is to optimize the three-dimensional (3D) trajectories and power allocation for the relaying UAVs to maximize the data flow while keeping the interference to existing nodes below a predefined threshold. An alternating-maximization strategy is proposed to solve the joint 3D trajectory design and power allocation for the relaying UAVs. To this end, we handle the information exchange within the network by resorting to spectral graph theory and subsequently address the power allocation through convex optimization techniques. Simulation results show that our approach can considerably improve the information flow while the interference threshold constraint is met. △ Less

Submitted 16 April, 2019; originally announced April 2019.

Comments: 6 pages, 5 figures

NOMA for VLC Downlink Transmission with Random Receiver Orientation

Authors: Yavuz Yapici, Ismail Guvenc

Abstract: Visible light communications (VLC) is an emerging technology with a promise of viable solution to spectrum crunch problem in conventional radio frequency (RF) bands. In this work, we consider a downlink multiuser VLC network where users randomly change their location and vertical orientation. In order to increase the spectral efficiency, we consider the non-orthogonal multiple access (NOMA) transm… ▽ More Visible light communications (VLC) is an emerging technology with a promise of viable solution to spectrum crunch problem in conventional radio frequency (RF) bands. In this work, we consider a downlink multiuser VLC network where users randomly change their location and vertical orientation. In order to increase the spectral efficiency, we consider the non-orthogonal multiple access (NOMA) transmission to serve multiple users simultaneously. In particular, we propose individual and group-based user ordering techniques for NOMA with various user feedback schemes. In order to reduce the computational complexity and link overhead, feedback on the channel quality is proposed to be computed using mean value of the vertical angle (instead of the exact instantaneous value), as well as the distance information. In addition, a two-bit feedback scheme is proposed for the group-based user scheduling, which relies on both the distance and vertical angle, and differs from the conventional one-bit feedback of the distance only. The outage probability and sum-rate expressions are derived analytically, which show a very good match with the simulation data. Numerical results verify that the practical feedback scheme with the mean vertical angle achieves a near-optimal sum-rate performance, and the two-bit feedback significantly outperforms the one-bit feedback. △ Less

Submitted 24 February, 2019; originally announced February 2019.

Comments: arXiv admin note: text overlap with arXiv:1801.04888

SLNR Based Precoding for One-Bit Quantized Massive MIMO in mmWave Communications

Authors: Yavuz Yapıcı, Sung Joon Maeng, İsmail Güvenç, Huaiyu Dai, Arupjyoti Bhuyan

Abstract: Massive multiple-input multiple-output (MIMO) is a key technology for 5G wireless communications with a promise of significant capacity increase. The use of low-resolution data converters is crucial for massive MIMO to make the overall transmission as cost- and energy-efficient as possible. In this work, we consider a downlink millimeter-wave (mmWave) transmission scenario, where multiple users ar… ▽ More Massive multiple-input multiple-output (MIMO) is a key technology for 5G wireless communications with a promise of significant capacity increase. The use of low-resolution data converters is crucial for massive MIMO to make the overall transmission as cost- and energy-efficient as possible. In this work, we consider a downlink millimeter-wave (mmWave) transmission scenario, where multiple users are served simultaneously by massive MIMO with one-bit digital-to-analog (D/A) converters. In particular, we propose a novel precoder design based on signal-to-leakage-plus-noise ratio (SLNR), which minimizes energy leakage into undesired users while taking into account impairments due to nonlinear one-bit quantization. We show that well-known regularized zero-forcing (RZF) precoder is a particular version of the proposed SLNR-based precoder, which is obtained when quantization impairments are totally ignored. Numerical results underscore significant performance improvements along with the proposed SLNR-based precoder as compared to either RZF or zero-forcing (ZF) precoders. △ Less

Submitted 12 February, 2019; originally announced February 2019.

Dynamic Mobility-Aware Interference Avoidance for Aerial Base Stations in Cognitive Radio Networks

Authors: Ali Rahmati, Xiaofan He, Ismail Guvenc, Huaiyu Dai

Abstract: Aerial base station (ABS) is a promising solution for public safety as it can be deployed in coexistence with cellular networks to form a temporary communication network. However, the interference from the primary cellular network may severely degrade the performance of an ABS network. With this consideration, an adaptive dynamic interference avoidance scheme is proposed in this work for ABSs coex… ▽ More Aerial base station (ABS) is a promising solution for public safety as it can be deployed in coexistence with cellular networks to form a temporary communication network. However, the interference from the primary cellular network may severely degrade the performance of an ABS network. With this consideration, an adaptive dynamic interference avoidance scheme is proposed in this work for ABSs coexisting with a primary network. In the proposed scheme, the mobile ABSs can reconfigure their locations to mitigate the interference from the primary network, so as to better relay the data from the designated source(s) to destination(s). To this end, the single/multi-commodity maximum flow problems are formulated and the weighted Cheeger constant is adopted as a criterion to improve the maximum flow of the ABS network. In addition, a distributed algorithm is proposed to compute the optimal ABS moving directions. Moreover, the trade-off between the maximum flow and the shortest path trajectories is investigated and an energy-efficient approach is developed as well. Simulation results show that the proposed approach is effective in improving the maximum network flow and the energy-efficient approach can save up to 39% of the energy for the ABSs with marginal degradation in the maximum network flow. △ Less

Submitted 18 January, 2019; v1 submitted 9 January, 2019; originally announced January 2019.

Comments: 9 pages, 13 figures, to be presented in Proc. IEEE INFOCOM 2019

Load-Based On/Off Scheduling for Energy-Efficient Delay-Tolerant 5G Networks

Authors: Haluk Celebi, Yavuz Yapici, Ismail Guvenc, Henning Schulzrinne

Abstract: Dense deployment of small cells is seen as one of the major approaches for addressing the traffic demands in next-generation 5G wireless networks. The energy efficiency, however, becomes a key concern together with this massive amount of small cells. In this study, we therefore consider the energy-efficient small cell networks (SCN) using smart on/off scheduling (OOS) strategies, where a certain f… ▽ More Dense deployment of small cells is seen as one of the major approaches for addressing the traffic demands in next-generation 5G wireless networks. The energy efficiency, however, becomes a key concern together with this massive amount of small cells. In this study, we therefore consider the energy-efficient small cell networks (SCN) using smart on/off scheduling (OOS) strategies, where a certain fraction of small base stations (SBS) are put into less energy-consuming sleeping states to save energy. To this end, we first represent the overall SCN traffic by a new load variable, and analyze its statistics rigorously using Gamma approximation. We then propose two novel OOS algorithms exploiting this load variable in centralized and distributed fashions. We show that proposed load based OOS algorithms can lead to as high as 50\% of energy savings without sacrificing the average SCN throughput. In addition, load based strategies are shown to work well under high SCN traffic and delay-intolerant circumstances, and can be implemented efficiently using the load statistics. We also show that the performance of load based algorithms gets maximized for certain length of sleeping periods, where assuming short sleep periods is as energy-inefficient as keeping SBSs in sleep states for very long. △ Less

Submitted 21 December, 2018; originally announced December 2018.

Comments: Submitted to IEEE Trans. on Green Commun. and Netw

Enhancing Physical Layer Security for NOMA Transmission in mmWave Drone Networks

Authors: Nadisanka Rupasinghe, Yavuz Yapici, Ismail Guvenc, Huaiyu Dai, Arupjyoti Bhuyan

Abstract: Physical layer security (PLS) is critically important for emerging wireless communication networks to maintain the confidentiality of the information of legitimate users. In this paper, we investigate enhancing PLS in an unmanned aerial vehicle (UAV) based communication network where a UAV acting as an aerial base station (BS) provides coverage in a densely packed user area (such as a stadium or a… ▽ More Physical layer security (PLS) is critically important for emerging wireless communication networks to maintain the confidentiality of the information of legitimate users. In this paper, we investigate enhancing PLS in an unmanned aerial vehicle (UAV) based communication network where a UAV acting as an aerial base station (BS) provides coverage in a densely packed user area (such as a stadium or a concert area). In particular, non-orthogonal multiple access (NOMA) together with highly-directional multi-antenna transmission techniques in mmWave frequency bands are utilized for improving spectral efficiency. In order to achieve PLS against potential eavesdropper attacks, we introduce a protected zone around the user region. However, limited resource availability refrain protected zone being extended to cover the entire eavesdropper region. Hence, we propose an approach to optimize the protected zone shape (for fixed area) at each UAV-BS hovering altitude. The associated secrecy performance is evaluated considering the secrecy outage and sum secrecy rates. Numerical results reveal the importance of protected zone shape optimization at each altitude to maximize NOMA secrecy rates. △ Less

Submitted 3 December, 2018; originally announced December 2018.

Low-Complexity Adaptive Beam and Channel Tracking for Mobile mmWave Communications

Authors: Yavuz Yapici, Ismail Guvenc

Abstract: In this paper, we study low-complexity algorithms for beam and channel tracking for millimeter-wave (mmWave) communications. In particular, the least mean squares (LMS) and bidirectional LMS (BiLMS) algorithms are derived for a mobile mmWave transmission scenario, where channel measurement is a nonlinear function of the unknown angle-of-arrival (AoA) and angle-of-departure (AoD). Numerical results… ▽ More In this paper, we study low-complexity algorithms for beam and channel tracking for millimeter-wave (mmWave) communications. In particular, the least mean squares (LMS) and bidirectional LMS (BiLMS) algorithms are derived for a mobile mmWave transmission scenario, where channel measurement is a nonlinear function of the unknown angle-of-arrival (AoA) and angle-of-departure (AoD). Numerical results confirm that LMS is superior to widely used Extended Kalman Filter (EKF) algorithm in tracking the mmWave beam, when the initialization of AoA/AoD and channel gains is imperfect (i.e., performed using noisy channel estimates). Moreover, BiLMS exhibits a very good mean square error (MSE) performance as compared to both LMS and EKF, which makes it a promising channel tracking algorithm for a mobile mmWave transmission scenario. We also show that LMS and BiLMS algorithms are more robust against the impairments due to the non-optimal antenna array size as compared to EKF, and show relatively faster convergence characteristic along with increasing signal-to-noise ratio (SNR). △ Less

Submitted 20 December, 2018; v1 submitted 28 November, 2018; originally announced November 2018.

Comments: Accepted and presented at Asilomar Conference, 2018

Interference Coordination for Aerial and Terrestrial Nodes in Three-Tier LTE-Advanced HetNet

Authors: Abhaykumar Kumbhar, Hamidullah Binol, Ismail Guvenc, Kemal Akkaya

Abstract: Integrating unmanned aerial vehicles (UAVs) as user equipment (UE) and base-stations (BSs) into an existing LTE-Advanced heterogeneous network (HetNet) can further enhance wireless connectivity and support emerging services. However, this would require effective configuration of system-level design parameters for interference management. This paper provides system-level insights into a three-tier… ▽ More Integrating unmanned aerial vehicles (UAVs) as user equipment (UE) and base-stations (BSs) into an existing LTE-Advanced heterogeneous network (HetNet) can further enhance wireless connectivity and support emerging services. However, this would require effective configuration of system-level design parameters for interference management. This paper provides system-level insights into a three-tier LTEAdvanced air/ground HetNet, wherein the UAVs are deployed both as BSs and UEs, and co-exist with existing terrestrial nodes. Moreover, this HetNet leverages on cell range expansion (CRE), intercell interference coordination (ICIC), 3D beamforming, and enhanced support for UAVs. Through Monte-Carlo simulations, we compare system-wide fifth percentile spectral efficiency (5pSE) and coverage probability for different ICIC techniques, while jointly optimizing the ICIC and CRE parameters. Our results show that reduced power subframes defined in 3GPP Rel-11 can provide considerably better 5pSE and coverage probability than the 3GPP Rel-10 with almost blank subframes. △ Less

Submitted 21 October, 2018; v1 submitted 2 September, 2018; originally announced September 2018.

Comments: Accepted IEEE Radio and Wireless Symposium (RWS) 2019

Angle Feedback for NOMA Transmission in mmWave Drone Networks

Authors: Nadisanka Rupasinghe, Yavuz Yapici, Ismail Guvenc, Monisha Ghosh, Yuichi Kakishima

Abstract: In this paper, we consider an unmanned aerial vehicle (UAV) based wireless network using non-orthogonal multiple access (NOMA) transmission in millimeter-wave frequencies to deliver broadband data in a spectrally efficient fashion at hotspot scenarios. The necessity for the NOMA transmitter to gather information on user channel quality becomes a major drawback in practical deployments. We therefor… ▽ More In this paper, we consider an unmanned aerial vehicle (UAV) based wireless network using non-orthogonal multiple access (NOMA) transmission in millimeter-wave frequencies to deliver broadband data in a spectrally efficient fashion at hotspot scenarios. The necessity for the NOMA transmitter to gather information on user channel quality becomes a major drawback in practical deployments. We therefore consider various limited feedback schemes for NOMA transmission, to relieve the complexity of tracking and feeding back the full channel state information (CSI) of the users. In particular, through beamforming we allow NOMA to exploit the space domain, and hence the user angle emerges as a promising (yet novel) limited feedback scheme. We show that as the user region for NOMA transmission gets wider, the users become more distinctive at the transmitter side with respect to their angles, making user angle feedback a better alternative than distance feedback in such scenarios. We rigorously derive and analyze the outage sum rate performance for NOMA transmission considering various user ordering strategies involving full CSI, angle, and distance feedback schemes. Our analytical results for NOMA outage sum rates using those feedback schemes match closely with simulations, and provide useful insights on properly choosing a limited feedback scheme for different deployment geometries and operating configurations. △ Less

Submitted 28 February, 2019; v1 submitted 21 August, 2018; originally announced August 2018.

UAV-Based in-band Integrated Access and Backhaul for 5G Communications

Authors: Abdurrahman Fouda, Ahmed S. Ibrahim, Ismail Guvenc, Monisha Ghosh

Abstract: We introduce the concept of using unmanned aerial vehicles (UAVs) as drone base stations for in-band Integrated Access and Backhaul (IB-IAB) scenarios for 5G networks. We first present a system model for forward link transmissions in an IB-IAB multi-tier drone cellular network. We then investigate the key challenges of this scenario and propose a framework that utilizes the flying capabilities of… ▽ More We introduce the concept of using unmanned aerial vehicles (UAVs) as drone base stations for in-band Integrated Access and Backhaul (IB-IAB) scenarios for 5G networks. We first present a system model for forward link transmissions in an IB-IAB multi-tier drone cellular network. We then investigate the key challenges of this scenario and propose a framework that utilizes the flying capabilities of the UAVs as the main degree of freedom to find the optimal precoder design for the backhaul links, user-base station association, UAV 3D hovering locations, and power allocations. We discuss how the proposed algorithm can be utilized to optimize the network performance in both large and small scales. Finally, we use an exhaustive search-based solution to demonstrate the performance gains that can be achieved from the presented algorithm in terms of the received signal to interference plus noise ratio (SINR) and overall network sum-rate. △ Less

Submitted 18 July, 2018; originally announced July 2018.

Comments: To be presented in the proceedings of VTC-Fall'18, Chicago, IL

Slow Beam Steering for Indoor Multi-User Visible Light Communications

Authors: Yusuf Said Eroglu, Chethan Kumar Anjinappa, Ismail Guvenc, Nezih Pala

Abstract: Visible light communications (VLC) is an emerging technology that enables broadband data rates using the visible spectrum. VLC beam steering has been studied in the literature to track mobile users and to improve coverage. However, in some scenarios, it may be needed to track and serve multiple users using a single beam, which has not been rigorously studied in the existing works to our best knowl… ▽ More Visible light communications (VLC) is an emerging technology that enables broadband data rates using the visible spectrum. VLC beam steering has been studied in the literature to track mobile users and to improve coverage. However, in some scenarios, it may be needed to track and serve multiple users using a single beam, which has not been rigorously studied in the existing works to our best knowledge. In this paper, considering slow beam steering where beam directions are assumed to be fixed within a transmission frame, we find the optimum steering angles to simultaneously serve multiple users within the frame duration. This is achieved by solving a non-convex optimization problem using grid based search and majorization-minimization (MM) procedure. Additionally, we consider multiple steerable beams case with larger number of users in the network, and propose an algorithm to cluster users and serve each cluster with a separate beam. The simulation results show that clustering users can provide higher rates compared to serving each user with a separate beam, and two user clusters maximizes the sum rate in a crowded room setting. △ Less

Submitted 26 May, 2018; originally announced May 2018.

Comments: To be published in IEEE SPAWC 2018 proceedings

Angular and Temporal Correlation of V2X Channels Across Sub-6 GHz and mmWave Bands

Authors: Chethan Kumar Anjinappa, Ismail Guvenc

Abstract: 5G millimeter wave (mmWave) technology is envisioned to be an integral part of next-generation vehicle-to-everything (V2X) networks and autonomous vehicles due to its broad bandwidth, wide field of view sensing, and precise localization capabilities. The reliability of mmWave links may be compromised due to difficulties in beam alignment for mobile channels and due to blocking effects between a mm… ▽ More 5G millimeter wave (mmWave) technology is envisioned to be an integral part of next-generation vehicle-to-everything (V2X) networks and autonomous vehicles due to its broad bandwidth, wide field of view sensing, and precise localization capabilities. The reliability of mmWave links may be compromised due to difficulties in beam alignment for mobile channels and due to blocking effects between a mmWave transmitter and a receiver. To address such challenges, out-of-band information from sub-6 GHz channels can be utilized for predicting the temporal and angular channel characteristics in mmWave bands, which necessitates a good understanding of how propagation characteristics are coupled across different bands. In this paper, we use ray tracing simulations to characterize the angular and temporal correlation across a wide range of propagation frequencies for V2X channels ranging from 900 MHz up to 73 GHz, for a vehicle maintaining line-of-sight (LOS) and non-LOS (NLOS) beams with a transmitter in an urban environment. Our results shed light on increasing sparsity behavior of propagation channels with increasing frequency and highlight the strong temporal/angular correlation among 5.9 GHz and 28 GHz bands especially for LOS channels. △ Less

Submitted 6 April, 2018; originally announced April 2018.

Coverage Enhancement for mmWave Communications using Passive Reflectors

Authors: Wahab Khawaja, Ozgur Ozdemir, Yavuz Yapici, Ismail Guvenc, Yuichi Kakishima

Abstract: Millimeter wave (mmWave) technology is expected to dominate the future 5G networks mainly due to large spectrum available at these frequencies. However, coverage deteriorates significantly at mmWave frequencies due to higher path loss, especially for the non-line-of-sight (NLOS) scenarios. In this work, we explore the use of passive reflectors for improving mmWave signal coverage in NLOS indoor ar… ▽ More Millimeter wave (mmWave) technology is expected to dominate the future 5G networks mainly due to large spectrum available at these frequencies. However, coverage deteriorates significantly at mmWave frequencies due to higher path loss, especially for the non-line-of-sight (NLOS) scenarios. In this work, we explore the use of passive reflectors for improving mmWave signal coverage in NLOS indoor areas. Measurements are carried out using the PXI-based mmWave transceiver platforms from National Instruments operating at 28 GHz, and the results are compared with the outcomes of ray tracing (RT) simulations in a similar environment. For both the measurements and RT simulations, different shapes of metallic passive reflectors are used to observe the coverage (signal strength) statistics on a receiver grid in an NLOS area. For a square metallic sheet reflector of size 24 by 24 in and 33 by 33 in , we observe a significant increase in the received power in the NLOS region, with a median gain of 20 dB when compared to no reflector case. The cylindrical reflector shows more uniform coverage on the receiver grid as compared to flat reflectors that are more directional. △ Less

Submitted 25 May, 2018; v1 submitted 22 March, 2018; originally announced March 2018.

Comments: Accepted for IEEE GSMM 2018 conference. Camera ready version updated

Comparison of Limited Feedback Schemes for NOMA Transmission in mmWave Drone Networks

Authors: Nadisanka Rupasinghe, Yavuz Yapici, Ismail Guvenc, Yuichi Kakishima

Abstract: Introducing non-orthogonal multiple access (NOMA) transmission to an unmanned aerial vehicle (UAV) based communication network is a promising solution to enhance its spectral efficiency. However, for realistic deployment of such a network, identifying a practical user feedback scheme for NOMA is essential. In this paper, considering two practical feedback schemes we introduce NOMA transmission to… ▽ More Introducing non-orthogonal multiple access (NOMA) transmission to an unmanned aerial vehicle (UAV) based communication network is a promising solution to enhance its spectral efficiency. However, for realistic deployment of such a network, identifying a practical user feedback scheme for NOMA is essential. In this paper, considering two practical feedback schemes we introduce NOMA transmission to UAVs acting as aerial base stations (BS) to provide coverage at a large stadium. In particular, a UAV-BS generates directional beams, and multiple users are served simultaneously within the same beam employing NOMA transmission. Each user is considered to have a target rate based on its quality of service (QoS) requirements. In order to relieve the burden of tracking and feeding back full channel state information, we consider two limited feedback schemes as practical alternatives: 1) user distance, and 2) user angle with respect to beamforming direction under different user region geometries. Our evaluation results show that NOMA with limited feedback can provide better sum rates compared to its orthogonal counterpart. Further, based on the geometry of user region we identify that there is an optimal feedback scheme and user ordering criteria for NOMA transmission which can maximize sum rates. △ Less

Submitted 9 March, 2018; originally announced March 2018.

Comments: arXiv admin note: substantial text overlap with arXiv:1711.10050, arXiv:1801.04504

A Graph Theoretic Approach for Training Overhead Reduction in FDD Massive MIMO Systems

Authors: Nadisanka Rupasinghe, Yuichi Kakishima, Haralabos Papadopoulos, Ismail Guvenc

Abstract: The overheads associated with feedback-based channel acquisition can greatly compromise the achievable rates of FDD based massive MIMO systems. Indeed, downlink (DL) training and uplink (UL) feedback overheads scale linearly with the number of base station (BS) antennas, in sharp contrast to TDD-based massive MIMO, where a single UL pilot trains the whole BS array. In this work, we propose a graph… ▽ More The overheads associated with feedback-based channel acquisition can greatly compromise the achievable rates of FDD based massive MIMO systems. Indeed, downlink (DL) training and uplink (UL) feedback overheads scale linearly with the number of base station (BS) antennas, in sharp contrast to TDD-based massive MIMO, where a single UL pilot trains the whole BS array. In this work, we propose a graph-theoretic approach to reducing DL training and UL feedback overheads in FDD massive MIMO systems. In particular, we consider a single-cell scenario involving a single BS with a massive antenna array serving to single-antenna mobile stations (MSs) in the DL. We assume the BS employs two-stage beamforming in the DL, comprising DFT pre-beamforming followed by MU-MIMO precoding. The proposed graph-theoretic approach exploits knowledge of the angular spectra of the BS-MS channels to construct DL training protocols with reduced overheads. Simulation results reveal that the proposed training-resources allocation method can provide approximately 35% sum-rate performance gain compared to conventional orthogonal training. Our analysis also sheds light into the impact of overhead reduction on channel estimation quality, and, in turn, achievable rates. △ Less

Submitted 3 February, 2018; originally announced February 2018.

Non-Orthogonal Multiple Access for Mobile VLC Networks with Random Receiver Orientation

Authors: Yavuz Yapici, Ismail Guvenc

Abstract: We consider a downlink multiuser visible light communications (VLC) network where users randomly change their location and vertical orientation. The non-orthogonal multiple access (NOMA) strategy is adopted to serve multiple users simultaneously, and, hence, to improve spectral efficiency. We propose two novel user scheduling schemes for NOMA, which are referred to as individual and group-based. I… ▽ More We consider a downlink multiuser visible light communications (VLC) network where users randomly change their location and vertical orientation. The non-orthogonal multiple access (NOMA) strategy is adopted to serve multiple users simultaneously, and, hence, to improve spectral efficiency. We propose two novel user scheduling schemes for NOMA, which are referred to as individual and group-based. In order to further reduce the computational complexity and link overhead, novel limited-feedback schemes (on channel quality) are also proposed, which basically involve mean vertical angle (instead of its instantaneous value). Moreover, a two-bit feedback scheme is proposed for group-based user scheduling, which relies on not only distance but also vertical angle (in contrast to conventional one-bit feedback with distance only). The outage probability and sum-rate expressions are derived analytically, which show a very good match with the simulation data. Numerical results verify that the practical feedback scheme with the mean vertical angle achieves a near-optimal sum-rate performance, and the two-bit feedback significantly outperforms the one-bit feedback. △ Less

Submitted 26 February, 2019; v1 submitted 15 January, 2018; originally announced January 2018.

Non-Orthogonal Multiple Access for mmWave Drone Networks with Limited Feedback

Authors: Nadisanka Rupasinghe, Yavuz Yapici, Ismail Guvenc, Yuichi Kakishima

Abstract: Unmanned aerial vehicle (UAV) base stations (BSs) can be a promising solution to provide connectivity and quality of service (QoS) guarantees during temporary events and after disasters. In this paper, we consider a scenario where UAV-BSs are serving large number of mobile users in a hot spot area (e.g., in a stadium). We introduce non-orthogonal multiple access (NOMA) transmission at UAV-BSs to s… ▽ More Unmanned aerial vehicle (UAV) base stations (BSs) can be a promising solution to provide connectivity and quality of service (QoS) guarantees during temporary events and after disasters. In this paper, we consider a scenario where UAV-BSs are serving large number of mobile users in a hot spot area (e.g., in a stadium). We introduce non-orthogonal multiple access (NOMA) transmission at UAV-BSs to serve more users simultaneously considering user distances as the available feedback for user ordering during NOMA formulation. With millimeter-wave (mmWave) transmission and multi-antenna techniques, we assume UAV-BS generates directional beams and multiple users are served simultaneously within the same beam. However, due to the limitations of physical vertical beamwidth of the UAV-BS beam, it may not be possible to cover the entire user region at UAV altitudes of practical relevance. During such situations, a beam scanning approach is proposed to maximize the achievable sum rates. We develop a comprehensive framework over which outage probabilities and respective sum rates are derived rigorously and we investigate the optimal operational altitude of UAV-BS to maximize the sum rates using our analytical framework. Our analysis shows that NOMA with distance feedback can provide better outage sum rates compared to orthogonal multiple access. △ Less

Submitted 28 July, 2018; v1 submitted 13 January, 2018; originally announced January 2018.

Autonomous Tracking of Intermittent RF Source Using a UAV Swarm

Authors: Farshad Koohifar, Ismail Guvenc, Mihail L. Sichitiu

Abstract: Localization of a radio frequency (RF) transmitter with intermittent transmissions is considered via a group of unmanned aerial vehicles (UAVs) equipped with omnidirectional received signal strength (RSS) sensors. This group embarks on an autonomous patrol to localize and track the target with a specified accuracy, as quickly as possible. The challenge can be decomposed into two stages: 1) estimat… ▽ More Localization of a radio frequency (RF) transmitter with intermittent transmissions is considered via a group of unmanned aerial vehicles (UAVs) equipped with omnidirectional received signal strength (RSS) sensors. This group embarks on an autonomous patrol to localize and track the target with a specified accuracy, as quickly as possible. The challenge can be decomposed into two stages: 1) estimation of the target position given previous measurements (localization), and 2) planning the future trajectory of the tracking UAVs to get lower expected localization error given current estimation (path planning). For each stage we compare two algorithms in terms of performance and computational load. For the localization stage, we compare a detection based extended Kalman filter (EKF) and a recursive Bayesian estimator. For the path planning stage, we compare steepest descent posterior Cramer-Rao lower bound (CRLB) path planning and a bio-inspired heuristic path planning. Our results show that the steepest descent path planning outperforms the bio-inspired path planning by an order of magnitude, and recursive Bayesian estimator narrowly outperforms detection based EKF. △ Less

Submitted 3 January, 2018; originally announced January 2018.

Non-Orthogonal Multiple Access for mmWave Drones with Multi-Antenna Transmission

Authors: Nadisanka Rupasinghe, Yavuz Yapici, Ismail Guvenc, Yuichi Kakishima

Abstract: Unmanned aerial vehicles (UAVs) can be deployed as aerial base stations (BSs) for rapid establishment of communication networks during temporary events and after disasters. Since UAV-BSs are low power nodes, achieving high spectral and energy efficiency are of paramount importance. In this paper, we introduce non-orthogonal multiple access (NOMA) transmission for millimeter-wave (mmWave) drones se… ▽ More Unmanned aerial vehicles (UAVs) can be deployed as aerial base stations (BSs) for rapid establishment of communication networks during temporary events and after disasters. Since UAV-BSs are low power nodes, achieving high spectral and energy efficiency are of paramount importance. In this paper, we introduce non-orthogonal multiple access (NOMA) transmission for millimeter-wave (mmWave) drones serving as flying BSs at a large stadium potentially with several hundreds or thousands of mobile users. In particular, we make use of multi-antenna techniques specifically taking into consideration the physical constraints of the antenna array, to generate directional beams. Multiple users are then served within the same beam employing NOMA transmission. If the UAV beam can not cover entire region where users are distributed, we introduce beam scanning to maximize outage sum rates. The simulation results reveal that, with NOMA transmission the spectral efficiency of the UAV based communication can be greatly enhanced compared to orthogonal multiple access (OMA) transmission. Further, the analysis shows that there is an optimum transmit power value for NOMA beyond which outage sum rates do not improve further. △ Less

Submitted 13 January, 2018; v1 submitted 27 November, 2017; originally announced November 2017.

Impact of Random Receiver Orientation on Visible Light Communications Channel

Authors: Yusuf Said Eroglu, Yavuz Yapici, Ismail Guvenc

Abstract: Visible Light Communications (VLC) has been studied thoroughly in recent years as an alternative or complementary technology to radio frequency communications. The reliability of VLC channels highly depends on the availability and alignment of line of sight links. In this work, we study the effect of random receiver orientation for mobile users over VLC downlink channels, which affects the existen… ▽ More Visible Light Communications (VLC) has been studied thoroughly in recent years as an alternative or complementary technology to radio frequency communications. The reliability of VLC channels highly depends on the availability and alignment of line of sight links. In this work, we study the effect of random receiver orientation for mobile users over VLC downlink channels, which affects the existence of line of sight links and the receiver field of view. Based on the statistics of vertical receiver orientation and user mobility, we develop a unified analytical framework to characterize the statistical distribution of VLC downlink channels, which is then utilized to obtain the outage probability and the bit error rate. Our analysis is generalized for arbitrary distributions of receiver orientation/location for a single transmitter, and extended to multiple transmitter case for certain scenarios. Extensive Monte Carlo simulations show a perfect match between the analytical and the simulation data in terms of both the statistical channel distribution and the resulting bit error rate. Our results also characterize the channel attenuation due to random receiver orientation/location for various scenarios of interest. △ Less

Submitted 26 October, 2017; originally announced October 2017.

Comments: Submitted to IEEE JLT. Has been partially published in Proc. Asilomar Conf. Signals, Systems, and Computers, Nov. 2017

A MAP-Based Layered Detection Algorithm and Outage Analysis over MIMO Channels

Authors: Yavuz Yapici, Ismail Guvenc, Yuichi Kakishima

Abstract: Efficient symbol detection algorithms carry critical importance for achieving the spatial multiplexing gains promised by multi-input multi-output (MIMO) systems. In this paper, we consider a maximum a posteriori probability (MAP) based symbol detection algorithm, called M-BLAST, over uncoded quasi-static MIMO channels. Relying on the successive interference cancellation (SIC) receiver, M-BLAST alg… ▽ More Efficient symbol detection algorithms carry critical importance for achieving the spatial multiplexing gains promised by multi-input multi-output (MIMO) systems. In this paper, we consider a maximum a posteriori probability (MAP) based symbol detection algorithm, called M-BLAST, over uncoded quasi-static MIMO channels. Relying on the successive interference cancellation (SIC) receiver, M-BLAST algorithm offers a superior error performance over its predecessor V-BLAST with a signal-to-noise ratio (SNR) gain of as large as 2 dB under various settings of recent interest. Performance analysis of the M-BLAST algorithm is very complicated since the proposed detection order depends on the decision errors dynamically, which makes an already complex analysis of the conventional ordered SIC receivers even more difficult. To this end, a rigorous analytical framework is proposed to analyze the outage behavior of the M-BLAST algorithm over binary complex alphabets and two transmitting antennas, which has a potential to be generalized to multiple transmitting antennas and multidimensional constellation sets. The numerical results show a very good match between the analytical and simulation data under various SNR values and modulation alphabets. △ Less

Submitted 3 October, 2017; originally announced October 2017.

Sparsity-Aware Joint Frame Synchronization and Channel Estimation: Algorithm and USRP Implementation

Authors: Ozgur Ozdemir, Ridha Hamila, Naofal Al-Dhahir, Ismail Guvenc

Abstract: Conventional correlation-based frame synchronization techniques can suffer significant performance degradation over multi-path frequency-selective channels. As a remedy, in this paper we consider joint frame synchronization and channel estimation. This, however, increases the length of the resulting combined channel and its estimation becomes more challenging. On the other hand, since the combined… ▽ More Conventional correlation-based frame synchronization techniques can suffer significant performance degradation over multi-path frequency-selective channels. As a remedy, in this paper we consider joint frame synchronization and channel estimation. This, however, increases the length of the resulting combined channel and its estimation becomes more challenging. On the other hand, since the combined channel is a sparse vector, sparse channel estimation methods can be applied. We propose a joint frame synchronization and channel estimation method using the orthogonal matching pursuit (OMP) algorithm which exploits the sparsity of the combined channel vector. Subsequently, the channel estimate is used to design the equalizer. Our simulation results and experimental outcomes using software defined radios show that the proposed approach improves the overall system performance in terms of the mean square error (MSE) between the transmitted and the equalized symbols compared to the conventional method. △ Less

Submitted 5 September, 2017; originally announced September 2017.

System-Level Performance of mmWave Cellular Networks for Urban Micro Environments

Authors: Nadisanka Rupasinghe, Yuichi Kakishima, Ismail Guvenc

Abstract: In this paper, we investigate the propagation coupling loss (captures all sources of attenuation between serving cell and mobile station (MS)) and geometry metric (GM) (downlink average signal-to-interference plus noise ratio) performance of mmWave cellular networks for outdoor and indoor MSs, considering urban micro (UMi) environments. Based on these studies, we identify effective mmWave frequenc… ▽ More In this paper, we investigate the propagation coupling loss (captures all sources of attenuation between serving cell and mobile station (MS)) and geometry metric (GM) (downlink average signal-to-interference plus noise ratio) performance of mmWave cellular networks for outdoor and indoor MSs, considering urban micro (UMi) environments. Based on these studies, we identify effective mmWave frequency bands for cellular communication. We consider 3GPP compliant system-level simulations with two power allocation schemes: 1) transmit power scaled with communication bandwidth, and 2) constant total transmit power. Simulation results show that with scaled transmit power allocation, GM performance degradation is small: 20% of MSs experience GM less than 0 dB at all mmWave frequencies considered, for outdoor MSs. With constant Tx power allocation, 20% of MSs experience GM less than 0 dB for frequencies up to 30 GHz. Furthermore, 35% (48%) of outdoor MSs experience GM performance less than 0 dB at 60 GHz (100 GHz). On the other hand, for indoor MSs, even with scaled Tx power allocation, favorable GM performance is observed only at low frequencies, i.e., 2 GHz. △ Less

Submitted 13 August, 2017; originally announced August 2017.

A Survey on Low Latency Towards 5G: RAN, Core Network and Caching Solutions

Authors: Imtiaz Parvez, Ali Rahmati, Ismail Guvenc, Arif I. Sarwat, Huaiyu Dai

Abstract: The fifth generation (5G) wireless network technology is to be standardized by 2020, where main goals are to improve capacity, reliability, and energy efficiency, while reducing latency and massively increasing connection density. An integral part of 5G is the capability to transmit touch perception type real-time communication empowered by applicable robotics and haptics equipment at the network… ▽ More The fifth generation (5G) wireless network technology is to be standardized by 2020, where main goals are to improve capacity, reliability, and energy efficiency, while reducing latency and massively increasing connection density. An integral part of 5G is the capability to transmit touch perception type real-time communication empowered by applicable robotics and haptics equipment at the network edge. In this regard, we need drastic changes in network architecture including core and radio access network (RAN) for achieving end-to-end latency on the order of 1 ms. In this paper, we present a detailed survey on the emerging technologies to achieve low latency communications considering three different solution domains: RAN, core network, and caching. We also present a general overview of 5G cellular networks composed of software defined network (SDN), network function virtualization (NFV), caching, and mobile edge computing (MEC) capable of meeting latency and other 5G requirements. △ Less

Submitted 29 May, 2018; v1 submitted 8 August, 2017; originally announced August 2017.

Comments: Accepted in IEEE Communications Surveys and Tutorials

Exploiting LTE-Advanced HetNets and FeICIC for UAV-assisted Public Safety Communications

Authors: Abhaykumar Kumbhar, Ismail Guvenc, Simran Singh, Adem Tuncer

Abstract: Ensuring ubiquitous mission-critical public safety communications (PSC) to all the first responders in the public safety network (PSN) is crucial at an emergency site. Recently, the use of unmanned aerial vehicles (UAVs) has received extensive interest for PSC to fill the coverage holes and establish reliable connectivity. The UAVs can be deployed as unmanned aerial base stations (UABSs) as part o… ▽ More Ensuring ubiquitous mission-critical public safety communications (PSC) to all the first responders in the public safety network (PSN) is crucial at an emergency site. Recently, the use of unmanned aerial vehicles (UAVs) has received extensive interest for PSC to fill the coverage holes and establish reliable connectivity. The UAVs can be deployed as unmanned aerial base stations (UABSs) as part of a heterogeneous network (HetNet) PSC infrastructure. In this article, we address the inter-cell interference limiting factor in LTE-Advanced HetNets by applying 3GPP Release-11 further-enhanced inter-cell interference coordination (FeICIC) and cell range expansion (CRE) to enhance the system-wide spectral efficiency (SE). Through simulation with different path-loss models, we compare the system-wide 5th percentile SE when UABSs are deployed in a hexagonal grid and when their locations are optimized using a genetic algorithm, while also jointly optimizing the CRE and the FeICIC parameters. Our results show that at optimized UABS locations, the 3GPP Release-11 FeICIC with reduced power subframes can provide considerably better 5th percentile SE than the 3GPP Release-10 with almost blank subframes △ Less

Submitted 19 November, 2017; v1 submitted 3 August, 2017; originally announced August 2017.

Comments: IEEE Access Mission Critical Public-Safety Communications: Architectures, Enabling Technologies, and Future Applications 2017

A Software-Defined Multi-Element VLC Architecture

Authors: Sifat Ibne Mushfique, Prabath Palathingal, Yusuf Said Eroglu, Murat Yuksel, Ismail Guvenc, Nezih Pala

Abstract: In the modern era of radio frequency (RF) spectrum crunch, visible light communication (VLC) is a recent and promising alternative technology that operates at the visible light spectrum. Thanks to its unlicensed and large bandwidth, VLC can deliver high throughput, better energy efficiency, and low cost data communications. In this article, a hybrid RF/VLC architecture is considered that can simul… ▽ More In the modern era of radio frequency (RF) spectrum crunch, visible light communication (VLC) is a recent and promising alternative technology that operates at the visible light spectrum. Thanks to its unlicensed and large bandwidth, VLC can deliver high throughput, better energy efficiency, and low cost data communications. In this article, a hybrid RF/VLC architecture is considered that can simultaneously provide light- ing and communication coverage across a room. Considered architecture involves a novel multi-element hemispherical bulb design, which can transmit multiple data streams over light emitting diode (LED) modules. Simulations considering various VLC transmitter configurations and topologies show that good link quality and high spatial reuse can be maintained in typical indoor communication scenarios. △ Less

Submitted 1 August, 2017; originally announced August 2017.

Multi-Element VLC Networks: LED Assignment, Power Control, and Optimum Combining

Authors: Yusuf Said Eroglu, Ismail Guvenc, Alphan Sahin, Yavuz Yapici, Nezih Pala, Murat Yuksel

Abstract: Visible light communications (VLC) is a promising technology to address the spectrum crunch problem in radio frequency (RF) networks. A major advantage of VLC networks is that they can use the existing lighting infrastructure in indoor environments, which may have large number of LEDs for illumination. While LEDs used for lighting typically have limited bandwidth, presence of many LEDs can be expl… ▽ More Visible light communications (VLC) is a promising technology to address the spectrum crunch problem in radio frequency (RF) networks. A major advantage of VLC networks is that they can use the existing lighting infrastructure in indoor environments, which may have large number of LEDs for illumination. While LEDs used for lighting typically have limited bandwidth, presence of many LEDs can be exploited for indoor VLC networks, to serve each user by multiple LEDs for improving link quality and throughput. In this paper, LEDs are grouped and assigned to the users based on received signal strength from each LED, for which different solutions are proposed to achieve maximum throughput, proportional fairness and quality of service (QoS). Additionally, power optimization of LEDs for a given assignment is investigated, and Jacobian and Hessian matrices of the corresponding optimization problem are derived. Moreover, for multi-element receivers with LED grouping at the transmitter, an improved optimal combining method is proposed. This method suppresses interference caused by simultaneous data transfer of LEDs and improves the overall signal-to-interference-plus-noise-ratio (SINR) by 2 dB to 5 dB. Lastly, an efficient calculation of channel response is presented to simulate multipath VLC channel with low computational complexity. △ Less

Submitted 17 July, 2017; originally announced July 2017.

Comments: Submitted to J. Select. Areas Commun. (JSAC)

UAV Air-to-Ground Channel Characterization for mmWave Systems

Authors: Wahab Khawaja, Ozgur Ozdemir, Ismail Guvenc

Abstract: Communication at mmWave bands carries critical importance for 5G wireless networks. In this paper, we study the characterization of mmWave air-to-ground (AG) channels for unmanned aerial vehicle (UAV) communications. In particular, we use ray tracing simulations using Remcom Wireless InSite software to study the behavior of AG mmWave bands at two different frequencies: 28~GHz and 60~GHz. Received… ▽ More Communication at mmWave bands carries critical importance for 5G wireless networks. In this paper, we study the characterization of mmWave air-to-ground (AG) channels for unmanned aerial vehicle (UAV) communications. In particular, we use ray tracing simulations using Remcom Wireless InSite software to study the behavior of AG mmWave bands at two different frequencies: 28~GHz and 60~GHz. Received signal strength (RSS) and root mean square delay spread (RMS-DS) of multipath components (MPCs) are analyzed for different UAV heights considering four different environments: urban, suburban, rural, and over sea. It is observed that the RSS mostly follows the two ray propagation model along the UAV flight path for higher altitudes. This two ray propagation model is affected by the presence of high rise scatterers in urban scenario. Moreover, we present details of a universal serial radio peripheral (USRP) based channel sounder that can be used for AG channel measurements for mmWave (60 GHz) UAV communications. △ Less

Submitted 15 October, 2017; v1 submitted 1 July, 2017; originally announced July 2017.

Comments: Comment: Accepted for 5G Millimeter-Wave Channel Measurement, Models, and Systems workshop, VTC Fall 2017 Comment: Typo corrected in the x-axis of Fig. 4 and Fig. 5 on page 3 and page 4

Impact of Angular Spread in Moderately Large MIMO Systems under Pilot Contamination

Authors: Nadisanka Rupasinghe, Yavuz Yapici, Jorge Iscar, Ismail Guvenc

Abstract: Pilot contamination is known to be one of the main bottlenecks for massive multi-input multi-output (MIMO) networks. For moderately large antenna arrays (of importance to recent/emerging deployments) and correlated MIMO, pilot contamination may not be the dominant limiting factor in certain scenarios. To the best of our knowledge, a rigorous characterization of the achievable rates and their expli… ▽ More Pilot contamination is known to be one of the main bottlenecks for massive multi-input multi-output (MIMO) networks. For moderately large antenna arrays (of importance to recent/emerging deployments) and correlated MIMO, pilot contamination may not be the dominant limiting factor in certain scenarios. To the best of our knowledge, a rigorous characterization of the achievable rates and their explicit dependence on the angular spread (AS) is not available in the existing literature for moderately large antenna array regime. In this paper, considering eigen-beamforming (EBF) precoding, we derive an exact analytical expression for achievable rates in multi-cell MIMO systems under pilot contamination, and characterize the relation between the AS, array size, and respective user rates. Our analytical and simulation results reveal that the achievable rates for both the EBF and the regularized zero-forcing (RZF) precoders follow a non-monotonic behavior for increasing AS when the antenna array size is moderate. We argue that knowledge of this non-monotonic behavior can be exploited to develop effective user-cell pairing techniques. △ Less

Submitted 21 July, 2018; v1 submitted 12 July, 2017; originally announced July 2017.

UAV Assisted Public Safety Communications with LTE-Advanced HetNets and FeICIC

Authors: Abhaykumar Kumbhar, Simran Singh, Ismail Guvenc

Abstract: Establishing a reliable communication infrastructure at an emergency site is a crucial task for mission-critical and real-time public safety communications (PSC). To this end, use of the unmanned aerial vehicles (UAVs) has recently received extensive interest for PSC to establish reliable connectivity in a heterogeneous network (HetNet) environment. These UAVs can be deployed as unmanned aerial ba… ▽ More Establishing a reliable communication infrastructure at an emergency site is a crucial task for mission-critical and real-time public safety communications (PSC). To this end, use of the unmanned aerial vehicles (UAVs) has recently received extensive interest for PSC to establish reliable connectivity in a heterogeneous network (HetNet) environment. These UAVs can be deployed as unmanned aerial base stations (UABSs) as a part of HetNet infrastructure. In this article, we explore the role of agile UABSs in LTE-Advanced HetNets by applying 3GPP Release 11 further-enhanced inter-cell interference coordination (FeICIC) and cell range expansion (CRE) techniques. Through simulations, we compare the system-wide 5th percentile spectral efficiency (SE) when UABSs are deployed in a hexagonal grid and when their locations are optimized using a genetic algorithm, while also jointly optimizing the CRE and the FeICIC parameters. Our simulation results show that at optimized UABS locations, the 3GPP Release 11 FeICIC with reduced power subframes can provide considerably better 5th percentile SE than the 3GPP Release~10 with almost blank subframes. △ Less

Submitted 16 August, 2017; v1 submitted 27 June, 2017; originally announced June 2017.

Comments: Accepted Proc. IEEE Annual International Symposium on Personal, Indoor, and Mobile Radio Communications (PIMRC) 2017

Indoor UAV Navigation to a Rayleigh Fading Source Using Q-Learning

Authors: Bekir Sait Ciftler, Adem Tuncer, Ismail Guvenc

Abstract: Unmanned aerial vehicles (UAVs) can be used to localize victims, deliver first-aid, and maintain wireless connectivity to victims and first responders during search/rescue and public safety scenarios. In this letter, we consider the problem of navigating a UAV to a Rayleigh fading wireless signal source, e.g. the Internet-of-Things (IoT) devices such as smart watches and other wearables owned by t… ▽ More Unmanned aerial vehicles (UAVs) can be used to localize victims, deliver first-aid, and maintain wireless connectivity to victims and first responders during search/rescue and public safety scenarios. In this letter, we consider the problem of navigating a UAV to a Rayleigh fading wireless signal source, e.g. the Internet-of-Things (IoT) devices such as smart watches and other wearables owned by the victim in an indoor environment. The source is assumed to transmit RF signals, and a Q-learning algorithm is used to navigate the UAV to the vicinity of the source. Our results show that the time averaging window and the exploration rate for the Q-learning algorithm can be optimized for fastest navigation of the UAV to the IoT device. As a result, Q-learning achieves the best performance with smaller convergence time overall. △ Less

Submitted 29 May, 2017; originally announced May 2017.

Comments: 3 pages, 4 figures, in review for IEEE IoTJ

Occupancy Counting with Burst and Intermittent Signals in Smart Buildings

Authors: Bekir Sait Ciftler, Sener Dikmese, Ismail Guvenc, Kemal Akkaya, Abdullah Kadri

Abstract: Zone-level occupancy counting is a critical technology for smart buildings and can be used for several applications such as building energy management, surveillance, and public safety. Existing occupancy counting techniques typically require installation of large number of occupancy monitoring sensors inside a building as well as an established network. In this study, in order to achieve occupancy… ▽ More Zone-level occupancy counting is a critical technology for smart buildings and can be used for several applications such as building energy management, surveillance, and public safety. Existing occupancy counting techniques typically require installation of large number of occupancy monitoring sensors inside a building as well as an established network. In this study, in order to achieve occupancy counting, we consider the use of WiFi probe requests that are continuously transmitted from WiFi enabled smart devices. To this end, WiFi Pineapple equipment are used for passively capturing ambient probe requests from WiFi devices such as smart phones and tablets, where no connectivity to a WiFi network is required. This information is then used to localize users within coarsely defined occupancy zones, and subsequently to obtain occupancy count within each zone at different time scales. An interacting multi-model Kalman filter technique is developed to improve occupancy counting accuracy. Our numerical results using WiFi data collected at a university building show that utilization of WiFi probe requests can be considered a viable solution tool for zone-level occupancy counting in smart buildings. △ Less

Submitted 21 February, 2017; originally announced February 2017.

Comments: 11 pages, 14 figures

IoT Localization for Bistatic Passive UHF RFID Systems with 3D Radiation Pattern

Authors: Bekir Sait Ciftler, Abdullah Kadri, Ismail Guvenc

Abstract: Passive Radio-Frequency IDentification (RFID) systems carry critical importance for Internet of Things (IoT) applications due to their energy harvesting capabilities. RFID based position estimation, in particular, is expected to facilitate a wide array of location based services for IoT applications with low-power requirements. In this paper, considering monostatic and bistatic configurations and… ▽ More Passive Radio-Frequency IDentification (RFID) systems carry critical importance for Internet of Things (IoT) applications due to their energy harvesting capabilities. RFID based position estimation, in particular, is expected to facilitate a wide array of location based services for IoT applications with low-power requirements. In this paper, considering monostatic and bistatic configurations and 3D antenna radiation pattern, we investigate the accuracy of received signal strength based wireless localization using passive ultra high frequency (UHF) RFID systems. The Cramer-Rao Lower Bound (CRLB) for the localization accuracy is derived, and is compared with the accuracy of maximum likelihood estimators for various RFID antenna configurations. Numerical results show that due to RFID tag/antenna sensitivity, and the directional antenna pattern, the localization accuracy can degrade at blind locations that remain outside of the RFID reader antennas' main beam patterns. In such cases optimizing elevation angle of antennas are shown to improve localization coverage, while using bistatic configuration improves localization accuracy significantly. △ Less

Submitted 1 February, 2017; originally announced February 2017.

Comments: 11 pages, 8 figures