Showing 1–37 of 37 results for author: Riley, D

Generalizing mkFit and its Application to HL-LHC

Authors: Giuseppe Cerati, Peter Elmer, Patrick Gartung, Leonardo Giannini, Matti Kortelainen, Vyacheslav Krutelyov, Steven Lantz, Mario Masciovecchio, Tres Reid, Allison Reinsvold Hall, Daniel Riley, Matevz Tadel, Emmanouil Vourliotis, Peter Wittich, Avi Yagil

Abstract: mkFit is an implementation of the Kalman filter-based track reconstruction algorithm that exploits both thread- and data-level parallelism. In the past few years the project transitioned from the R&D phase to deployment in the Run-3 offline workflow of the CMS experiment. The CMS tracking performs a series of iterations, targeting reconstruction of tracks of increasing difficulty after removing hi… ▽ More mkFit is an implementation of the Kalman filter-based track reconstruction algorithm that exploits both thread- and data-level parallelism. In the past few years the project transitioned from the R&D phase to deployment in the Run-3 offline workflow of the CMS experiment. The CMS tracking performs a series of iterations, targeting reconstruction of tracks of increasing difficulty after removing hits associated to tracks found in previous iterations. mkFit has been adopted for several of the tracking iterations, which contribute to the majority of reconstructed tracks. When tested in the standard conditions for production jobs, speedups in track pattern recognition are on average of the order of 3.5x for the iterations where it is used (3-7x depending on the iteration). Multiple factors contribute to the observed speedups, including vectorization and a lightweight geometry description, as well as improved memory management and single precision. Efficient vectorization is achieved with both the icc and the gcc (default in CMSSW) compilers and relies on a dedicated library for small matrix operations, Matriplex, which has recently been released in a public repository. While the mkFit geometry description already featured levels of abstraction from the actual Phase-1 CMS tracker, several components of the implementations were still tied to that specific geometry. We have further generalized the geometry description and the configuration of the run-time parameters, in order to enable support for the Phase-2 upgraded tracker geometry for the HL-LHC and potentially other detector configurations. The implementation strategy and high-level code changes required for the HL-LHC geometry are presented. Speedups in track building from mkFit imply that track fitting becomes a comparably time consuming step of the tracking chain. △ Less

Submitted 18 December, 2023; originally announced December 2023.

Speeding up the CMS track reconstruction with a parallelized and vectorized Kalman-filter-based algorithm during the LHC Run 3

Authors: Sophie Berkman, Giuseppe Cerati, Peter Elmer, Patrick Gartung, Leonardo Giannini, Brian Gravelle, Allison R. Hall, Matti Kortelainen, Vyacheslav Krutelyov, Steve R. Lantz, Mario Masciovecchio, Kevin McDermott, Boyana Norris, Michael Reid, Daniel S. Riley, Matevž Tadel, Emmanouil Vourliotis, Bei Wang, Peter Wittich, Avraham Yagil

Abstract: One of the most challenging computational problems in the Run 3 of the Large Hadron Collider (LHC) and more so in the High-Luminosity LHC (HL-LHC) is expected to be finding and fitting charged-particle tracks during event reconstruction. The methods used so far at the LHC and in particular at the CMS experiment are based on the Kalman filter technique. Such methods have shown to be robust and to p… ▽ More One of the most challenging computational problems in the Run 3 of the Large Hadron Collider (LHC) and more so in the High-Luminosity LHC (HL-LHC) is expected to be finding and fitting charged-particle tracks during event reconstruction. The methods used so far at the LHC and in particular at the CMS experiment are based on the Kalman filter technique. Such methods have shown to be robust and to provide good physics performance, both in the trigger and offline. In order to improve computational performance, we explored Kalman-filter-based methods for track finding and fitting, adapted for many-core SIMD architectures. This adapted Kalman-filter-based software, called "mkFit", was shown to provide a significant speedup compared to the traditional algorithm, thanks to its parallelized and vectorized implementation. The mkFit software was recently integrated into the offline CMS software framework, in view of its exploitation during the Run 3 of the LHC. At the start of the LHC Run 3, mkFit will be used for track finding in a subset of the CMS offline track reconstruction iterations, allowing for significant improvements over the existing framework in terms of computational performance, while retaining comparable physics performance. The performance of the CMS track reconstruction using mkFit at the start of the LHC Run 3 is presented, together with prospects of further improvement in the upcoming years of data taking. △ Less

Submitted 12 April, 2023; originally announced April 2023.

Comments: Contribution to the ACAT 2022

Photo-induced pair production and strong field QED on Gemini

Authors: CH Keitel, A Di Piazza, GG Paulus, T Stoehlker, EL Clark, S Mangles, Z Najmudin, K Krushelnick, J Schreiber, M Borghesi, B Dromey, M Geissler, D Riley, G Sarri, M Zepf

Abstract: The extreme intensities obtainable with lasers such as Gemini allow non-linear QED phenomena to be investigated according to our calculations. Electron-positron pair production from a pure vacuum target, which has yet to be observed experimentally, is possibly the most iconic process. Beyond pair-production our campaign will allow the experimental investigation of currently unexplored extreme radi… ▽ More The extreme intensities obtainable with lasers such as Gemini allow non-linear QED phenomena to be investigated according to our calculations. Electron-positron pair production from a pure vacuum target, which has yet to be observed experimentally, is possibly the most iconic process. Beyond pair-production our campaign will allow the experimental investigation of currently unexplored extreme radiation regimes, like the quantum radiation dominated regime (where quantum and self-field effects become important) and non-linear Compton scattering. This is the first experiment in a multi-part campaign proposed by a major international collaboration to investigate non-linear QED. This proposal is for the first experiment in a series of 3 to achieve our most high-profile experimental goal of pair production in vacuum, but each experiment is designed to have its own tangible high-profile outcome. △ Less

Submitted 10 March, 2021; originally announced March 2021.

Report number: Rutheford Appleton Laboratory, Central Laser Facility Proposal Reference No: HPL 112008 (2010)

Parallelizing the Unpacking and Clustering of Detector Data for Reconstruction of Charged Particle Tracks on Multi-core CPUs and Many-core GPUs

Authors: Giuseppe Cerati, Peter Elmer, Brian Gravelle, Matti Kortelainen, Vyacheslav Krutelyov, Steven Lantz, Mario Masciovecchio, Kevin McDermott, Boyana Norris, Allison Reinsvold Hall, Micheal Reid, Daniel Riley, Matevž Tadel, Peter Wittich, Bei Wang, Frank Würthwein, Avraham Yagil

Abstract: We present results from parallelizing the unpacking and clustering steps of the raw data from the silicon strip modules for reconstruction of charged particle tracks. Throughput is further improved by concurrently processing multiple events using nested OpenMP parallelism on CPU or CUDA streams on GPU. The new implementation along with earlier work in developing a parallelized and vectorized imple… ▽ More We present results from parallelizing the unpacking and clustering steps of the raw data from the silicon strip modules for reconstruction of charged particle tracks. Throughput is further improved by concurrently processing multiple events using nested OpenMP parallelism on CPU or CUDA streams on GPU. The new implementation along with earlier work in developing a parallelized and vectorized implementation of the combinatoric Kalman filter algorithm has enabled efficient global reconstruction of the entire event on modern computer architectures. We demonstrate the performance of the new implementation on Intel Xeon and NVIDIA GPU architectures. △ Less

Submitted 27 January, 2021; originally announced January 2021.

Speeding up Particle Track Reconstruction using a Parallel Kalman Filter Algorithm

Authors: Steven Lantz, Kevin McDermott, Michael Reid, Daniel Riley, Peter Wittich, Sophie Berkman, Giuseppe Cerati, Matti Kortelainen, Allison Reinsvold Hall, Peter Elmer, Bei Wang, Leonardo Giannini, Vyacheslav Krutelyov, Mario Masciovecchio, Matevž Tadel, Frank Würthwein, Avraham Yagil, Brian Gravelle, Boyana Norris

Abstract: One of the most computationally challenging problems expected for the High-Luminosity Large Hadron Collider (HL-LHC) is determining the trajectory of charged particles during event reconstruction. Algorithms used at the LHC today rely on Kalman filtering, which builds physical trajectories incrementally while incorporating material effects and error estimation. Recognizing the need for faster comp… ▽ More One of the most computationally challenging problems expected for the High-Luminosity Large Hadron Collider (HL-LHC) is determining the trajectory of charged particles during event reconstruction. Algorithms used at the LHC today rely on Kalman filtering, which builds physical trajectories incrementally while incorporating material effects and error estimation. Recognizing the need for faster computational throughput, we have adapted Kalman-filter-based methods for highly parallel, many-core SIMD architectures that are now prevalent in high-performance hardware. In this paper, we discuss the design and performance of the improved tracking algorithm, referred to as mkFit. A key piece of the algorithm is the Matriplex library, containing dedicated code to optimally vectorize operations on small matrices. The physics performance of the mkFit algorithm is comparable to the nominal CMS tracking algorithm when reconstructing tracks from simulated proton-proton collisions within the CMS detector. We study the scaling of the algorithm as a function of the parallel resources utilized and find large speedups both from vectorization and multi-threading. mkFit achieves a speedup of a factor of 6 compared to the nominal algorithm when run in a single-threaded application within the CMS software framework. △ Less

Submitted 10 July, 2020; v1 submitted 29 May, 2020; originally announced June 2020.

Reconstruction of Charged Particle Tracks in Realistic Detector Geometry Using a Vectorized and Parallelized Kalman Filter Algorithm

Authors: Giuseppe Cerati, Peter Elmer, Brian Gravelle, Matti Kortelainen, Vyacheslav Krutelyov, Steven Lantz, Mario Masciovecchio, Kevin McDermott, Boyana Norris, Allison Reinsvold Hall, Michael Reid, Daniel Riley, Matevž Tadel, Peter Wittich, Bei Wang, Frank Würthwein, Avraham Yagil

Abstract: One of the most computationally challenging problems expected for the High-Luminosity Large Hadron Collider (HL-LHC) is finding and fitting particle tracks during event reconstruction. Algorithms used at the LHC today rely on Kalman filtering, which builds physical trajectories incrementally while incorporating material effects and error estimation. Recognizing the need for faster computational th… ▽ More One of the most computationally challenging problems expected for the High-Luminosity Large Hadron Collider (HL-LHC) is finding and fitting particle tracks during event reconstruction. Algorithms used at the LHC today rely on Kalman filtering, which builds physical trajectories incrementally while incorporating material effects and error estimation. Recognizing the need for faster computational throughput, we have adapted Kalman-filter-based methods for highly parallel, many-core SIMD and SIMT architectures that are now prevalent in high-performance hardware. Previously we observed significant parallel speedups, with physics performance comparable to CMS standard tracking, on Intel Xeon, Intel Xeon Phi, and (to a limited extent) NVIDIA GPUs. While early tests were based on artificial events occurring inside an idealized barrel detector, we showed subsequently that our mkFit software builds tracks successfully from complex simulated events (including detector pileup) occurring inside a geometrically accurate representation of the CMS-2017 tracker. Here, we report on advances in both the computational and physics performance of mkFit, as well as progress toward integration with CMS production software. Recently we have improved the overall efficiency of the algorithm by preserving short track candidates at a relatively early stage rather than attempting to extend them over many layers. Moreover, mkFit formerly produced an excess of duplicate tracks; these are now explicitly removed in an additional processing step. We demonstrate that with these enhancements, mkFit becomes a suitable choice for the first iteration of CMS tracking, and eventually for later iterations as well. We plan to test this capability in the CMS High Level Trigger during Run 3 of the LHC, with an ultimate goal of using it in both the CMS HLT and offline reconstruction for the HL-LHC CMS tracker. △ Less

Submitted 9 July, 2020; v1 submitted 14 February, 2020; originally announced February 2020.

Report number: FERMILAB-CONF-20-075-SCD

Speeding up Particle Track Reconstruction in the CMS Detector using a Vectorized and Parallelized Kalman Filter Algorithm

Authors: Giuseppe Cerati, Peter Elmer, Brian Gravelle, Matti Kortelainen, Vyacheslav Krutelyov, Steven Lantz, Mario Masciovecchio, Kevin McDermott, Boyana Norris, Michael Reid, Allison Reinsvold Hall, Daniel Riley, Matevž Tadel, Peter Wittich, Frank Würthwein, Avi Yagil

Abstract: Building particle tracks is the most computationally intense step of event reconstruction at the LHC. With the increased instantaneous luminosity and associated increase in pileup expected from the High-Luminosity LHC, the computational challenge of track finding and fitting requires novel solutions. The current track reconstruction algorithms used at the LHC are based on Kalman filter methods tha… ▽ More Building particle tracks is the most computationally intense step of event reconstruction at the LHC. With the increased instantaneous luminosity and associated increase in pileup expected from the High-Luminosity LHC, the computational challenge of track finding and fitting requires novel solutions. The current track reconstruction algorithms used at the LHC are based on Kalman filter methods that achieve good physics performance. By adapting the Kalman filter techniques for use on many-core SIMD architectures such as the Intel Xeon and Intel Xeon Phi and (to a limited degree) NVIDIA GPUs, we are able to obtain significant speedups and comparable physics performance. New optimizations, including a dedicated post-processing step to remove duplicate tracks, have improved the algorithm's performance even further. Here we report on the current structure and performance of the code and future plans for the algorithm. △ Less

Submitted 6 November, 2019; v1 submitted 27 June, 2019; originally announced June 2019.

Comments: Submitted to proceedings of the 2019 Connecting the Dots and Workshop on Intelligent Trackers (CTD/WIT 2019); 6 pages, 4 figures

Parallelized Kalman-Filter-Based Reconstruction of Particle Tracks on Many-Core Architectures with the CMS Detector

Authors: Giuseppe Cerati, Peter Elmer, Brian Gravelle, Matti Kortelainen, Vyacheslav Krutelyov, Steven Lantz, Mario Masciovecchio, Kevin McDermott, Boyana Norris, Allison Reinsvold Hall, Daniel Riley, Matevž Tadel, Peter Wittich, Frank Würthwein, Avi Yagil

Abstract: In the High-Luminosity Large Hadron Collider (HL-LHC), one of the most challenging computational problems is expected to be finding and fitting charged-particle tracks during event reconstruction. The methods currently in use at the LHC are based on the Kalman filter. Such methods have shown to be robust and to provide good physics performance, both in the trigger and offline. In order to improve… ▽ More In the High-Luminosity Large Hadron Collider (HL-LHC), one of the most challenging computational problems is expected to be finding and fitting charged-particle tracks during event reconstruction. The methods currently in use at the LHC are based on the Kalman filter. Such methods have shown to be robust and to provide good physics performance, both in the trigger and offline. In order to improve computational performance, we explored Kalman-filter-based methods for track finding and fitting, adapted for many-core SIMD and SIMT architectures. Our adapted Kalman-filter-based software has obtained significant parallel speedups using such processors, e.g., Intel Xeon Phi, Intel Xeon SP (Scalable Processors) and (to a limited degree) NVIDIA GPUs. Recently, an effort has started towards the integration of our software into the CMS software framework, in view of its exploitation for the Run III of the LHC. Prior reports have shown that our software allows in fact for some significant improvements over the existing framework in terms of computational performance with comparable physics performance, even when applied to realistic detector configurations and event complexity. Here, we demonstrate that in such conditions physics performance can be further improved with respect to our prior reports, while retaining the improvements in computational performance, by making use of the knowledge of the detector and its geometry. △ Less

Submitted 5 June, 2019; originally announced June 2019.

Comments: Submitted to proceedings of 19th International Workshop on Advanced Computing and Analysis Techniques in Physics Research (ACAT 2019); 6 pages, 5 figures

Parallelized Kalman-Filter-Based Reconstruction of Particle Tracks on Many-Core Architectures

Authors: Giuseppe Cerati, Peter Elmer, Slava Krutelyov, Steven Lantz, Matthieu Lefebvre, Mario Masciovecchio, Kevin McDermott, Daniel Riley, Matevž Tadel, Peter Wittich, Frank Würthwein, Avi Yagil

Abstract: Faced with physical and energy density limitations on clock speed, contemporary microprocessor designers have increasingly turned to on-chip parallelism for performance gains. Algorithms should accordingly be designed with ample amounts of fine-grained parallelism if they are to realize the full performance of the hardware. This requirement can be challenging for algorithms that are naturally expr… ▽ More Faced with physical and energy density limitations on clock speed, contemporary microprocessor designers have increasingly turned to on-chip parallelism for performance gains. Algorithms should accordingly be designed with ample amounts of fine-grained parallelism if they are to realize the full performance of the hardware. This requirement can be challenging for algorithms that are naturally expressed as a sequence of small-matrix operations, such as the Kalman filter methods widely in use in high-energy physics experiments. In the High-Luminosity Large Hadron Collider (HL-LHC), for example, one of the dominant computational problems is expected to be finding and fitting charged-particle tracks during event reconstruction; today, the most common track-finding methods are those based on the Kalman filter. Experience at the LHC, both in the trigger and offline, has shown that these methods are robust and provide high physics performance. Previously we reported the significant parallel speedups that resulted from our efforts to adapt Kalman-filter-based tracking to many-core architectures such as Intel Xeon Phi. Here we report on how effectively those techniques can be applied to more realistic detector configurations and event complexity. △ Less

Submitted 27 March, 2018; v1 submitted 16 November, 2017; originally announced November 2017.

Comments: Accepted to the Proceedings of the 18th International Workshop on Advanced Computing and Analysis Techniques in Physics Research; 6 pages, 5 figures. arXiv admin note: text overlap with arXiv:1702.06359

Parallelized Kalman-Filter-Based Reconstruction of Particle Tracks on Many-Core Processors and GPUs

Authors: Giuseppe Cerati, Peter Elmer, Slava Krutelyov, Steven Lantz, Matthieu Lefebvre, Mario Masciovecchio, Kevin McDermott, Daniel Riley, Matevž Tadel, Peter Wittich, Frank Würthwein, Avi Yagil

Abstract: For over a decade now, physical and energy constraints have limited clock speed improvements in commodity microprocessors. Instead, chipmakers have been pushed into producing lower-power, multi-core processors such as GPGPU, ARM and Intel MIC. Broad-based efforts from manufacturers and developers have been devoted to making these processors user-friendly enough to perform general computations. How… ▽ More For over a decade now, physical and energy constraints have limited clock speed improvements in commodity microprocessors. Instead, chipmakers have been pushed into producing lower-power, multi-core processors such as GPGPU, ARM and Intel MIC. Broad-based efforts from manufacturers and developers have been devoted to making these processors user-friendly enough to perform general computations. However, extracting performance from a larger number of cores, as well as specialized vector or SIMD units, requires special care in algorithm design and code optimization. One of the most computationally challenging problems in high-energy particle experiments is finding and fitting the charged-particle tracks during event reconstruction. This is expected to become by far the dominant problem in the High-Luminosity Large Hadron Collider (HL-LHC), for example. Today the most common track finding methods are those based on the Kalman filter. Experience with Kalman techniques on real tracking detector systems has shown that they are robust and provide high physics performance. This is why they are currently in use at the LHC, both in the trigger and offline. Previously we reported on the significant parallel speedups that resulted from our investigations to adapt Kalman filters to track fitting and track building on Intel Xeon and Xeon Phi. Here, we discuss our progresses toward the understanding of these processors and the new developments to port Kalman filter to NVIDIA GPUs. △ Less

Submitted 19 June, 2017; v1 submitted 8 May, 2017; originally announced May 2017.

Comments: Submitted to proceedings of Connecting The Dots 2017 (CTD2017), Orsay. arXiv admin note: substantial text overlap with arXiv:1605.05508

Kalman filter tracking on parallel architectures

Authors: Giuseppe Cerati, Peter Elmer, Slava Krutelyov, Steven Lantz, Matthieu Lefebvre, Kevin McDermott, Daniel Riley, Matevž Tadel, Peter Wittich, Frank Würthwein, Avi Yagil

Abstract: Limits on power dissipation have pushed CPUs to grow in parallel processing capabilities rather than clock rate, leading to the rise of "manycore" or GPU-like processors. In order to achieve the best performance, applications must be able to take full advantage of vector units across multiple cores, or some analogous arrangement on an accelerator card. Such parallel performance is becoming a criti… ▽ More Limits on power dissipation have pushed CPUs to grow in parallel processing capabilities rather than clock rate, leading to the rise of "manycore" or GPU-like processors. In order to achieve the best performance, applications must be able to take full advantage of vector units across multiple cores, or some analogous arrangement on an accelerator card. Such parallel performance is becoming a critical requirement for methods to reconstruct the tracks of charged particles at the Large Hadron Collider and, in the future, at the High Luminosity LHC. This is because the steady increase in luminosity is causing an exponential growth in the overall event reconstruction time, and tracking is by far the most demanding task for both online and offline processing. Many past and present collider experiments adopted Kalman filter-based algorithms for tracking because of their robustness and their excellent physics performance, especially for solid state detectors where material interactions play a significant role. We report on the progress of our studies towards a Kalman filter track reconstruction algorithm with optimal performance on manycore architectures. The combinatorial structure of these algorithms is not immediately compatible with an efficient SIMD (or SIMT) implementation; the challenge for us is to recast the existing software so it can readily generate hundreds of shared-memory threads that exploit the underlying instruction set of modern processors. We show how the data and associated tasks can be organized in a way that is conducive to both multithreading and vectorization. We demonstrate very good performance on Intel Xeon and Xeon Phi architectures, as well as promising first results on Nvidia GPUs. △ Less

Submitted 21 November, 2017; v1 submitted 21 February, 2017; originally announced February 2017.

Comments: Proceedings of the 22nd International Conference on Computing in High Energy and Nuclear Physics, CHEP 2016; 8 pages, 9 figures

Journal ref: G Cerati et al 2017 J. Phys.: Conf. Ser. 898 042051

Kalman Filter Tracking on Parallel Architectures

Authors: Giuseppe Cerati, Peter Elmer, Slava Krutelyov, Steven Lantz, Matthieu Lefebvre, Kevin McDermott, Daniel Riley, Matevz Tadel, Peter Wittich, Frank Wuerthwein, Avi Yagil

Abstract: Power density constraints are limiting the performance improvements of modern CPUs. To address this we have seen the introduction of lower-power, multi-core processors such as GPGPU, ARM and Intel MIC. To stay within the power density limits but still obtain Moore's Law performance/price gains, it will be necessary to parallelize algorithms to exploit larger numbers of lightweight cores and specia… ▽ More Power density constraints are limiting the performance improvements of modern CPUs. To address this we have seen the introduction of lower-power, multi-core processors such as GPGPU, ARM and Intel MIC. To stay within the power density limits but still obtain Moore's Law performance/price gains, it will be necessary to parallelize algorithms to exploit larger numbers of lightweight cores and specialized functions like large vector units. Track finding and fitting is one of the most computationally challenging problems for event reconstruction in particle physics. At the High-Luminosity Large Hadron Collider (HL-LHC), for example, this will be by far the dominant problem. The need for greater parallelism has driven investigations of very different track finding techniques such as Cellular Automata or Hough Transforms. The most common track finding techniques in use today, however, are those based on the Kalman Filter. Significant experience has been accumulated with these techniques on real tracking detector systems, both in the trigger and offline. They are known to provide high physics performance, are robust, and are in use today at the LHC. We report on porting these algorithms to new parallel architectures. Our previous investigations showed that, using optimized data structures, track fitting with a Kalman Filter can achieve large speedups both with Intel Xeon and Xeon Phi. Additionally, we have previously shown first attempts at track building with some speedup. We report here our progress towards an end-to-end track reconstruction algorithm fully exploiting vectorization and parallelization techniques in a simplified experimental environment. △ Less

Submitted 18 May, 2016; originally announced May 2016.

Comments: Submitted to proceedings of Connecting The Dots 2016 (CTD2016), Vienna. arXiv admin note: text overlap with arXiv:1601.08245

Kalman-Filter-Based Particle Tracking on Parallel Architectures at Hadron Colliders

Authors: Giuseppe Cerati, Peter Elmer, Steven Lantz, Kevin McDermott, Dan Riley, Matevž Tadel, Peter Wittich, Frank Würthwein, Avi Yagil

Abstract: Power density constraints are limiting the performance improvements of modern CPUs. To address this we have seen the introduction of lower-power, multi-core processors such as GPGPU, ARM and Intel MIC. To stay within the power density limits but still obtain Moore's Law performance/price gains, it will be necessary to parallelize algorithms to exploit larger numbers of lightweight cores and specia… ▽ More Power density constraints are limiting the performance improvements of modern CPUs. To address this we have seen the introduction of lower-power, multi-core processors such as GPGPU, ARM and Intel MIC. To stay within the power density limits but still obtain Moore's Law performance/price gains, it will be necessary to parallelize algorithms to exploit larger numbers of lightweight cores and specialized functions like large vector units. Track finding and fitting is one of the most computationally challenging problems for event reconstruction in particle physics. At the High-Luminosity Large Hadron Collider (HL-LHC), for example, this will be by far the dominant problem. The need for greater parallelism has driven investigations of very different track finding techniques such as Cellular Automata or Hough Transforms. The most common track finding techniques in use today, however, are those based on the Kalman Filter. Significant experience has been accumulated with these techniques on real tracking detector systems, both in the trigger and offline. They are known to provide high physics performance, are robust, and are in use today at the LHC. We report on porting these algorithms to new parallel architectures. Our previous investigations showed that, using optimized data structures, track fitting with Kalman Filter can achieve large speedups both with Intel Xeon and Xeon Phi. We report here our progress towards an end-to-end track reconstruction algorithm fully exploiting vectorization and parallelization techniques in a realistic experimental environment. △ Less

Submitted 29 January, 2016; originally announced January 2016.

Comments: Proceedings of the 2015 IEEE NSS/MIC Conference, San Diego, CA

Kalman Filter Tracking on Parallel Architectures

Authors: Giuseppe Cerati, Peter Elmer, Steven Lantz, Kevin McDermott, Dan Riley, Matevž Tadel, Peter Wittich, Frank Würthwein, Avi Yagil

Abstract: Power density constraints are limiting the performance improvements of modern CPUs. To address this we have seen the introduction of lower-power, multi-core processors, but the future will be even more exciting. In order to stay within the power density limits but still obtain Moore's Law performance/price gains, it will be necessary to parallelize algorithms to exploit larger numbers of lightweig… ▽ More Power density constraints are limiting the performance improvements of modern CPUs. To address this we have seen the introduction of lower-power, multi-core processors, but the future will be even more exciting. In order to stay within the power density limits but still obtain Moore's Law performance/price gains, it will be necessary to parallelize algorithms to exploit larger numbers of lightweight cores and specialized functions like large vector units. Example technologies today include Intel's Xeon Phi and GPGPUs. Track finding and fitting is one of the most computationally challenging problems for event reconstruction in particle physics. At the High Luminosity LHC, for example, this will be by far the dominant problem. The need for greater parallelism has driven investigations of very different track finding techniques including Cellular Automata or returning to Hough Transform. The most common track finding techniques in use today are however those based on the Kalman Filter. Significant experience has been accumulated with these techniques on real tracking detector systems, both in the trigger and offline. They are known to provide high physics performance, are robust and are exactly those being used today for the design of the tracking system for HL-LHC. Our previous investigations showed that, using optimized data structures, track fitting with Kalman Filter can achieve large speedup both with Intel Xeon and Xeon Phi. We report here our further progress towards an end-to-end track reconstruction algorithm fully exploiting vectorization and parallelization techniques in a realistic simulation setup. △ Less

Submitted 18 May, 2015; originally announced May 2015.

Traditional Tracking with Kalman Filter on Parallel Architectures

Authors: Giuseppe Cerati, Peter Elmer, Steven Lantz, Ian MacNeill, Kevin McDermott, Dan Riley, Matevz Tadel, Peter Wittich, Frank Wuerthwein, Avi Yagil

Abstract: Power density constraints are limiting the performance improvements of modern CPUs. To address this, we have seen the introduction of lower-power, multi-core processors, but the future will be even more exciting. In order to stay within the power density limits but still obtain Moore's Law performance/price gains, it will be necessary to parallelize algorithms to exploit larger numbers of lightwei… ▽ More Power density constraints are limiting the performance improvements of modern CPUs. To address this, we have seen the introduction of lower-power, multi-core processors, but the future will be even more exciting. In order to stay within the power density limits but still obtain Moore's Law performance/price gains, it will be necessary to parallelize algorithms to exploit larger numbers of lightweight cores and specialized functions like large vector units. Example technologies today include Intel's Xeon Phi and GPGPUs. Track finding and fitting is one of the most computationally challenging problems for event reconstruction in particle physics. At the High Luminosity LHC, for example, this will be by far the dominant problem. The most common track finding techniques in use today are however those based on the Kalman Filter. Significant experience has been accumulated with these techniques on real tracking detector systems, both in the trigger and offline. We report the results of our investigations into the potential and limitations of these algorithms on the new parallel hardware. △ Less

Submitted 29 September, 2014; originally announced September 2014.

Comments: Submitted to proceedings of 16th International workshop on Advanced Computing and Analysis Techniques in physics research (ACAT 2014), Prague

Updated measurements of absolute $D^+$ and $D^0$ hadronic branching fractions and $σ(e^+e^-\to D\overline{D})$ at $E_\mathrm{cm} = 3774$ MeV

Authors: CLEO Collaboration, G. Bonvicini, D. Cinabro M. J. Smith, P. Zhou, P. Naik, J. Rademacker, K. W. Edwards, R. A. Briere, H. Vogel, J. L. Rosner, J. P. Alexander, D. G. Cassel, R. Ehrlich, L. Gibbons, S. W. Gray, D. L. Hartill, B. K. Heltsley, D. L. Kreinick, V. E. Kuznetsov, J. R. Patterson, D. Peterson, D. Riley, A. Ryd, A. J. Sadoff, X. Shi , et al. (44 additional authors not shown)

Abstract: Utilizing the full CLEO-c data sample of 818 pb$^{-1}$ of $e^+e^-$ data taken at the $ψ(3770)$ resonance, we update our measurements of absolute hadronic branching fractions of charged and neutral $D$ mesons. We previously reportedresults from subsets of these data. Using a double tag technique we obtain branching fractions for three $D^0$ and six $D^+$ modes, including the reference branching fra… ▽ More Utilizing the full CLEO-c data sample of 818 pb$^{-1}$ of $e^+e^-$ data taken at the $ψ(3770)$ resonance, we update our measurements of absolute hadronic branching fractions of charged and neutral $D$ mesons. We previously reportedresults from subsets of these data. Using a double tag technique we obtain branching fractions for three $D^0$ and six $D^+$ modes, including the reference branching fractions $\mathcal{B} (D^0\to K^-π^+)=(3.934 \pm 0.021 \pm 0.061)\%$ and $\mathcal{B} (D^+ \to K^- π^+π^+)=(9.224 \pm 0.059 \pm 0.157)\%$. The uncertainties are statistical and systematic, respectively. In these measurements we include the effects of final-state radiation by allowing for additional unobserved photons in the final state, and the systematic errors include our estimates of the uncertainties of these effects. Furthermore, using an independent measurement of the luminosity, we obtain the cross sections $σ(e^+e^-\to D^0\overline{D}{}^0)=(3.607\pm 0.017 \pm 0.056) \ \mathrm{nb}$ and $σ(e^+e^-\to D^+D^-)=(2.882\pm 0.018 \pm 0.042) \ \mathrm{nb}$ at a center of mass energy, $E_\mathrm{cm} = 3774 \pm 1$ MeV. △ Less

Submitted 20 August, 2014; v1 submitted 24 December, 2013; originally announced December 2013.

Comments: 12 pages, 2 figures, and 6 tables. The Fig. 2 in this version corrects errors in plotting the fits in the original Fig. 2. Correcting these errors does not affect any result or text. We thank Dr. Maurice Garcia-Sciveres for pointing out this mistake

Report number: CLNS 13/2087, CLEO 13-02

Journal ref: Phys. Rev. D 89, 072002 (2014)

Improved Measurement of Absolute Hadronic Branching Fractions of the Ds+ Meson

Authors: CLEO Collaboration, P. U. E. Onyisi, G. Bonvicini, D. Cinabro, M. J. Smith, P. Zhou, P. Naik, J. Rademacker, K. W. Edwards, R. A. Briere, H. Vogel, J. L. Rosner, J. P. Alexander, D. G. Cassel, S. Das, R. Ehrlich, L. Gibbons, S. W. Gray, D. L. Hartill, B. K. Heltsley, D. L. Kreinick, V. E. Kuznetsov, J. R. Patterson, D. Peterson, D. Riley , et al. (45 additional authors not shown)

Abstract: The branching fractions of Ds meson decays serve to normalize many measurements of processes involving charm quarks. Using 586 pb^-1 of e+ e- collisions recorded at a center of mass energy of 4.17 GeV, we determine absolute branching fractions for 13 Ds decays in 16 reconstructed final states with a double tag technique. In particular we make a precise measurement of the branching fraction B(Ds ->… ▽ More The branching fractions of Ds meson decays serve to normalize many measurements of processes involving charm quarks. Using 586 pb^-1 of e+ e- collisions recorded at a center of mass energy of 4.17 GeV, we determine absolute branching fractions for 13 Ds decays in 16 reconstructed final states with a double tag technique. In particular we make a precise measurement of the branching fraction B(Ds -> K- K+ pi+) = (5.55 +- 0.14 +- 0.13)%, where the uncertainties are statistical and systematic respectively. We find a significantly reduced value of B(Ds -> pi+ pi0 eta') compared to the world average, and our results bring the inclusively and exclusively measured values of B(Ds -> eta' X)$ into agreement. We also search for CP-violating asymmetries in Ds decays and measure the cross-section of e+ e- -> Ds* Ds at Ecm = 4.17 GeV. △ Less

Submitted 14 September, 2013; v1 submitted 22 June, 2013; originally announced June 2013.

Comments: 12 pages, 3 figures. Submitted to Physical Review D. PDF also available through http://www.lns.cornell.edu/public/CLNS/2013/ v2: as published in PRD

Report number: CLNS 13/2086, CLEO 13-01

Journal ref: Phys. Rev. D 88, 032009 (2013)

Updated Measurement of the Strong Phase in D0 --> K+pi- Decay Using Quantum Correlations in e+e- --> D0 D0bar at CLEO

Authors: CLEO Collaboration, D. M. Asner, G. Tatishvili, J. Y. Ge, D. H. Miller, I. P. J. Shipsey, B. Xin, G. S. Adams, J. Napolitano, K. M. Ecklund, Q. He, J. Insler, H. Muramatsu, L. J. Pearson, E. H. Thorndike, M. Artuso, S. Blusk, N. Horwitz, R. Mountain, T. Skwarnicki, S. Stone, J. C. Wang, L. M. Zhang, P. U. E. Onyisi, G. Bonvicini , et al. (50 additional authors not shown)

Abstract: We analyze a sample of 3 million quantum-correlated D0 D0bar pairs from 818 pb^-1 of e+e- collision data collected with the CLEO-c detector at E_cm = 3.77 GeV, to give an updated measurement of \cosδand a first determination of \sinδ, where δis the relative strong phase between doubly Cabibbo-suppressed D0 --> K+pi- and Cabibbo-favored D0bar --> K+pi- decay amplitudes. With no inputs from other ex… ▽ More We analyze a sample of 3 million quantum-correlated D0 D0bar pairs from 818 pb^-1 of e+e- collision data collected with the CLEO-c detector at E_cm = 3.77 GeV, to give an updated measurement of \cosδand a first determination of \sinδ, where δis the relative strong phase between doubly Cabibbo-suppressed D0 --> K+pi- and Cabibbo-favored D0bar --> K+pi- decay amplitudes. With no inputs from other experiments, we find \cosδ= 0.81 +0.22+0.07 -0.18-0.05, \sinδ= -0.01 +- 0.41 +- 0.04, and |δ| = 10 +28+13 -53-0 degrees. By including external measurements of mixing parameters, we find alternative values of \cosδ= 1.15 +0.19+0.00 -0.17-0.08, \sinδ= 0.56 +0.32+0.21 -0.31-0.20, and δ= (18 +11-17) degrees. Our results can be used to improve the world average uncertainty on the mixing parameter y by approximately 10%. △ Less

Submitted 7 November, 2012; v1 submitted 2 October, 2012; originally announced October 2012.

Comments: Minor revisions, version accepted by PRD

Report number: CLNS 12/2083; CLEO 12-01

Status Report of the DPHEP Study Group: Towards a Global Effort for Sustainable Data Preservation in High Energy Physics

Authors: Z. Akopov, Silvia Amerio, David Asner, Eduard Avetisyan, Olof Barring, James Beacham, Matthew Bellis, Gregorio Bernardi, Siegfried Bethke, Amber Boehnlein, Travis Brooks, Thomas Browder, Rene Brun, Concetta Cartaro, Marco Cattaneo, Gang Chen, David Corney, Kyle Cranmer, Ray Culbertson, Sunje Dallmeier-Tiessen, Dmitri Denisov, Cristinel Diaconu, Vitaliy Dodonov, Tony Doyle, Gregory Dubois-Felsmann , et al. (65 additional authors not shown)

Abstract: Data from high-energy physics (HEP) experiments are collected with significant financial and human effort and are mostly unique. An inter-experimental study group on HEP data preservation and long-term analysis was convened as a panel of the International Committee for Future Accelerators (ICFA). The group was formed by large collider-based experiments and investigated the technical and organisati… ▽ More Data from high-energy physics (HEP) experiments are collected with significant financial and human effort and are mostly unique. An inter-experimental study group on HEP data preservation and long-term analysis was convened as a panel of the International Committee for Future Accelerators (ICFA). The group was formed by large collider-based experiments and investigated the technical and organisational aspects of HEP data preservation. An intermediate report was released in November 2009 addressing the general issues of data preservation in HEP. This paper includes and extends the intermediate report. It provides an analysis of the research case for data preservation and a detailed description of the various projects at experiment, laboratory and international levels. In addition, the paper provides a concrete proposal for an international organisation in charge of the data management and policies in high-energy physics. △ Less

Submitted 21 May, 2012; originally announced May 2012.

Report number: DPHEP-2012-001

Studies of the decays D^0 \rightarrow K_S^0K^-π^+ and D^0 \rightarrow K_S^0K^+π^-

Authors: CLEO Collaboration, J. Insler, H. Muramatsu, C. S. Park, L. J. Pearson, E. H. Thorndike, S. Ricciardi, C. Thomas, M. Artuso, S. Blusk, R. Mountain, T. Skwarnicki, S. Stone, J. C. Wang, L. M. Zhang, G. Bonvicini, D. Cinabro, M. J. Smith, P. Zhou, T. Gershon, P. Naik, J. Rademacker, K. W. Edwards, K. Randrianarivony, R. A. Briere , et al. (51 additional authors not shown)

Abstract: The first measurements of the coherence factor R_{K_S^0Kπ} and the average strong--phase difference δ^{K_S^0Kπ} in D^0 \to K_S^0 K^\mpπ^\pm decays are reported. These parameters can be used to improve the determination of the unitary triangle angle γ in B^- \rightarrow $\widetilde{D}K^-$ decays, where $\widetilde{D}$ is either a D^0 or a D^0-bar meson decaying to the same final state, and also in… ▽ More The first measurements of the coherence factor R_{K_S^0Kπ} and the average strong--phase difference δ^{K_S^0Kπ} in D^0 \to K_S^0 K^\mpπ^\pm decays are reported. These parameters can be used to improve the determination of the unitary triangle angle γ in B^- \rightarrow $\widetilde{D}K^-$ decays, where $\widetilde{D}$ is either a D^0 or a D^0-bar meson decaying to the same final state, and also in studies of charm mixing. The measurements of the coherence factor and strong-phase difference are made using quantum-correlated, fully-reconstructed D^0D^0-bar pairs produced in e^+e^- collisions at the ψ(3770) resonance. The measured values are R_{K_S^0Kπ} = 0.70 \pm 0.08 and δ^{K_S^0Kπ} = (0.1 \pm 15.7)$^\circ$ for an unrestricted kinematic region and R_{K*K} = 0.94 \pm 0.12 and δ^{K*K} = (-16.6 \pm 18.4)$^\circ$ for a region where the combined K_S^0 π^\pm invariant mass is within 100 MeV/c^2 of the K^{*}(892)^\pm mass. These results indicate a significant level of coherence in the decay. In addition, isobar models are presented for the two decays, which show the dominance of the K^*(892)^\pm resonance. The branching ratio {B}(D^0 \rightarrow K_S^0K^+π^-)/{B}(D^0 \rightarrow K_S^0K^-π^+) is determined to be 0.592 \pm 0.044 (stat.) \pm 0.018 (syst.), which is more precise than previous measurements. △ Less

Submitted 25 October, 2016; v1 submitted 16 March, 2012; originally announced March 2012.

Comments: 38 pages. Version 3 updated to include the erratum information. Errors corrected in Eqs (25), (26), 28). Fit results updated accordingly, and external inputs updated to latest best known values. Typo corrected in Eq(3)- no other consequences

Report number: CLNS 11/2081; CLEO 11-07

Journal ref: Phys. Rev. D 85 092016 2012

Amplitude analysis of D0->K+K-pi+pi-

Authors: M. Artuso, S. Blusk, R. Mountain, T. Skwarnicki, S. Stone, L. M. Zhang, T. Gershon, G. Bonvicini, D. Cinabro, A. Lincoln, M. J. Smith, P. Zhou, J. Zhu, P. Naik, J. Rademacker, D. M. Asner, K. W. Edwards, K. Randrianarivony, G. Tatishvili, R. A. Briere, H. Vogel, P. U. E. Onyisi, J. L. Rosner, J. P. Alexander, D. G. Cassel , et al. (51 additional authors not shown)

Abstract: The first flavor-tagged amplitude analysis of the decay D0 to the self-conjugate final state K+K-pi+pi- is presented. Data from the CLEO II.V, CLEO III, and CLEO-c detectors are used, from which around 3000 signal decays are selected. The three most significant amplitudes, which contribute to the model that best fits the data, are phirho0, K1(1270)+-K-+, and non-resonant K+K-pi+pi-. Separate ampli… ▽ More The first flavor-tagged amplitude analysis of the decay D0 to the self-conjugate final state K+K-pi+pi- is presented. Data from the CLEO II.V, CLEO III, and CLEO-c detectors are used, from which around 3000 signal decays are selected. The three most significant amplitudes, which contribute to the model that best fits the data, are phirho0, K1(1270)+-K-+, and non-resonant K+K-pi+pi-. Separate amplitude analyses of D0 and D0-bar candidates indicate no CP violation among the amplitudes at the level of 5% to 30% depending on the mode. In addition, the sensitivity to the CP-violating parameter gamma/phi3 of a sample of 2000 B+ -> D0-tilde(K+K-pi+pi-)K+ decays, where D0-tilde is a D0 or D0-bar, collected at LHCb or a future flavor facility, is estimated to be (11.3 +/- 0.3) degrees using the favored model. △ Less

Submitted 29 June, 2012; v1 submitted 27 January, 2012; originally announced January 2012.

Comments: 40 pages, 7 figures and submitted to Phys. Rev D

Report number: CLNS 11/2082; CLEO 11-08

Journal ref: Phys. Rev. D 85, 122002 (2012)

First Measurement of the Form Factors in the Decays D0 to rho- e+ nu_e and D+ to rho0 e+ nu_e

Authors: CLEO Collaboration, S. Dobbs, Z. Metreveli, K. K. Seth, A. Tomaradze, T. Xiao, L. Martin, A. Powell, G. Wilkinson, H. Mendez, J. Y. Ge, G. S. Huang, D. H. Miller, V. Pavlunin, I. P. J. Shipsey, B. Xin, G. S. Adams, D. Hu, B. Moziak, J. Napolitano, K. M. Ecklund, J. Insler, H. Muramatsu, C. S. Park, L. J. Pearson , et al. (56 additional authors not shown)

Abstract: Using the entire CLEO-c psi(3770) to DDbar event sample, corresponding to an integrated luminosity of 818 pb^-1 and approximately 5.4 x 10^6 DDbar events, we measure the form factors for the decays D0 to rho- e+ nu_e and D+ to rho0 e+ nu_e for the first time and the branching fractions with improved precision. A four-dimensional unbinned maximum likelihood fit determines the form factor ratios to… ▽ More Using the entire CLEO-c psi(3770) to DDbar event sample, corresponding to an integrated luminosity of 818 pb^-1 and approximately 5.4 x 10^6 DDbar events, we measure the form factors for the decays D0 to rho- e+ nu_e and D+ to rho0 e+ nu_e for the first time and the branching fractions with improved precision. A four-dimensional unbinned maximum likelihood fit determines the form factor ratios to be: V(0)/A_1(0) = 1.48 +- 0.15 +- 0.05 and A_2(0)/A_1(0)= 0.83 +- 0.11 +- 0.04. Assuming CKM unitarity, the known D meson lifetimes and our measured branching fractions we obtain the form factor normalizations A_1(0), A_2(0), and V(0). We also present a measurement of the branching fraction for D^+ to omega e^+ nu_e with improved precision. △ Less

Submitted 13 December, 2011; originally announced December 2011.

Comments: 9 pages, available through http://www.lns.cornell.edu/public/CLNS/, submitted to PRL

Report number: CLNS 11/2075; CLEO 11-3

Journal ref: Phys. Rev. Lett. 110, 131802 (2013)

Amplitude analyses of the decays chi_c1 -> eta pi+ pi- and chi_c1 -> eta' pi+ pi-

Authors: CLEO Collaboration, G. S. Adams, J. Napolitano, K. M. Ecklund, J. Insler, H. Muramatsu, C. S. Park, L. J. Pearson, E. H. Thorndike, S. Ricciardi, C. Thomas, M. Artuso, S. Blusk, R. Mountain, T. Skwarnicki, S. Stone, L. M. Zhang, G. Bonvicini, D. Cinabro, A. Lincoln, M. J. Smith, P. Zhou, J. Zhu, P. Naik, J. Rademacker , et al. (52 additional authors not shown)

Abstract: Using a data sample of 2.59 x 10^7 psi(2S) decays obtained with the CLEO-c detector, we perform amplitude analyses of the complementary decay chains chi_c1 -> eta pi+ pi- and chi_c1 -> eta' pi+ pi-. We find evidence for a P-wave eta' pi scattering amplitude, which, if interpreted as a resonance, would have exotic J^PC = 1^-+ and parameters consistent with the pi_1(1600) state reported in other pro… ▽ More Using a data sample of 2.59 x 10^7 psi(2S) decays obtained with the CLEO-c detector, we perform amplitude analyses of the complementary decay chains chi_c1 -> eta pi+ pi- and chi_c1 -> eta' pi+ pi-. We find evidence for a P-wave eta' pi scattering amplitude, which, if interpreted as a resonance, would have exotic J^PC = 1^-+ and parameters consistent with the pi_1(1600) state reported in other production mechanisms. We also make the first observation of the decay a_0(980) -> eta' pi and measure the ratio of branching fractions B(a_0(980) -> eta' pi)/B(a_0(980) -> eta pi) = 0.064 +- 0.014 +- 0.014. The pi pi spectrum produced with a recoiling eta is compared to that with eta' recoil. △ Less

Submitted 9 January, 2012; v1 submitted 27 September, 2011; originally announced September 2011.

Comments: 27 pages, 12 figures, available through http://www.lns.cornell.edu/public/CLNS/

Report number: CLNS 11/2080; CLEO 11-06

Journal ref: Phys. Rev. D 84, 112009 (2011)

Branching fractions for Y(3S) -> pi^0 h_b and psi(2S) -> pi^0 h_c

Authors: CLEO Collaboration, J. Y. Ge, D. H. Miller, I. P. J. Shipsey, B. Xin, G. S. Adams, J. Napolitano, K. M. Ecklund, J. Insler, H. Muramatsu, C. S. Park, L. J. Pearson, E. H. Thorndike, S. Ricciardi, C. Thomas, M. Artuso, S. Blusk, R. Mountain, T. Skwarnicki, S. Stone, L. M. Zhang, G. Bonvicini, D. Cinabro, A. Lincoln, M. J. Smith , et al. (51 additional authors not shown)

Abstract: Using e^+e^- collision data corresponding to 5.88M Y(3S) [25.9M psi(2S)] decays and acquired by the CLEO III [CLEO-c] detectors operating at CESR, we study the single-pion transitions from Y(3S) [psi(2S)] to the respective spin-singlet states h_{b[c]}. Utilizing only the momentum of suitably selected transition-pi^0 candidates, we obtain the upper limit B(Y(3S) -> pi^0 h_b) < 1.2\times 10^{-3} at… ▽ More Using e^+e^- collision data corresponding to 5.88M Y(3S) [25.9M psi(2S)] decays and acquired by the CLEO III [CLEO-c] detectors operating at CESR, we study the single-pion transitions from Y(3S) [psi(2S)] to the respective spin-singlet states h_{b[c]}. Utilizing only the momentum of suitably selected transition-pi^0 candidates, we obtain the upper limit B(Y(3S) -> pi^0 h_b) < 1.2\times 10^{-3} at 90% confidence level, and measure B(psi(2S) -> pi^0 h_c) = (9.0+-1.5+-1.3)\times 10^{-4}. Signal sensitivities are enhanced by excluding very asymmetric pi^0 -> gamma gamma candidates. △ Less

Submitted 22 August, 2011; v1 submitted 17 June, 2011; originally announced June 2011.

Comments: 12 pages 4 figures, version published in Physical Review D

Report number: CLNS 11/2079, CLEO 11-05

Journal ref: Phys.Rev.D84:032008,2011

Analysis of the Decay D^0 to K^0_S pi^0 pi^0

Authors: CLEO Collaboration, N. Lowrey, S. Mehrabyan, M. Selen, J. Wiss, J. Libby, M. Kornicer, R. E. Mitchell, M. R. Shepherd, C. M. Tarbert, D. Besson, T. K. Pedlar, J. Xavier, D. Cronin-Hennessy, J. Hietala, P. Zweber, S. Dobbs, Z. Metreveli, K. K. Seth, A. Tomaradze, T. Xiao, S. Brisbane, L. Martin, A. Powell, P. Spradlin , et al. (62 additional authors not shown)

Abstract: We present the results of a Dalitz plot analysis of D^0 to K^0_S pi^0 pi^0 using the CLEO-c data set of 818 inverse pico-barns of e^+ e^- collisions accumulated at sqrt{s} = 3.77 GeV. This corresponds to three million D^0 D^0-bar pairs from which we select 1,259 tagged candidates with a background of 7.5 +- 0.9 percent. Several models have been explored, all of which include the K^*(892), K^*_2(14… ▽ More We present the results of a Dalitz plot analysis of D^0 to K^0_S pi^0 pi^0 using the CLEO-c data set of 818 inverse pico-barns of e^+ e^- collisions accumulated at sqrt{s} = 3.77 GeV. This corresponds to three million D^0 D^0-bar pairs from which we select 1,259 tagged candidates with a background of 7.5 +- 0.9 percent. Several models have been explored, all of which include the K^*(892), K^*_2(1430), K^*(1680), the f_0(980), and the sigma(500). We find that the combined pi^0 pi^0 S-wave contribution to our preferred fit is (28.9 +- 6.3 +- 3.1)% of the total decay rate while D^0 to K^*(892)^0 pi^0 contributes (65.6 +- 5.3 +- 2.5)%. Using three tag modes and correcting for quantum correlations we measure the D^0 to K^0_S pi^0 pi^0 branching fraction to be (1.059 +- 0.038 +- 0.061)%. △ Less

Submitted 15 June, 2011; originally announced June 2011.

Comments: 11 pages, 3 figures, available through http://www.lns.cornell.edu/public/CLNS/, submitted to PRD

Report number: CLNS 10/2069, CLEO 10-06

Search for the decay $D^+_{s}\toωe^+ν$

Authors: CLEO Collaboration, L. Martin, A. Powell, G. Wilkinson, J. Y. Ge, D. H. Miller, I. P. J. Shipsey, B. Xin, G. S. Adams, B. Moziak, J. Napolitano, K. M. Ecklund, J. Insler, H. Muramatsu, C. S. Park, L. J. Pearson, E. H. Thorndike, S. Ricciardi, C. Thomas, M. Artuso, S. Blusk, R. Mountain, T. Skwarnicki, S. Stone, L. M. Zhang , et al. (51 additional authors not shown)

Abstract: We present the first search for the decay $D^+_{s}\to ωe^{+}ν$ to test the four-quark content of the $D^+_{s}$ and the $ω$-$φ$ mixing model for this decay. We use 586 $\mathrm{pb}^{-1}$ of $e^{+}e^{-}$ collision data collected at a center-of-mass energy of 4170 MeV. We find no evidence of a signal, and set an upper limit on the branching fraction of $\mathcal{B}(D^+_{s}\toωe^+ν)<$0.20% at the 90%… ▽ More We present the first search for the decay $D^+_{s}\to ωe^{+}ν$ to test the four-quark content of the $D^+_{s}$ and the $ω$-$φ$ mixing model for this decay. We use 586 $\mathrm{pb}^{-1}$ of $e^{+}e^{-}$ collision data collected at a center-of-mass energy of 4170 MeV. We find no evidence of a signal, and set an upper limit on the branching fraction of $\mathcal{B}(D^+_{s}\toωe^+ν)<$0.20% at the 90% confidence level. △ Less

Submitted 13 May, 2011; originally announced May 2011.

Comments: 18 pages, 9 figures

Report number: CLNS-11-2077

Journal ref: Phys.Rev.D84:012005,2011

Observation of the Dalitz Decay $D_{s}^{*+} \to D_{s}^{+} e^{+} e^{-}$

Authors: D. Cronin-Hennessy, J. Hietala, S. Dobbs, Z. Metreveli, K. K. Seth, A. Tomaradze, T. Xiao, L. Martin, A. Powell, G. Wilkinson, H. Mendez, J. Y. Ge, D. H. Miller, I. P. J. Shipsey, B. Xin, G. S. Adams, D. Hu, B. Moziak, J. Napolitano, K. M. Ecklund, J. Insler, H. Muramatsu, C. S. Park, L. J. Pearson, E. H. Thorndike , et al. (54 additional authors not shown)

Abstract: Using 586 $\textrm{pb}^{-1}$ of $e^{+}e^{-}$ collision data acquired at $\sqrt{s}=4.170$ GeV with the CLEO-c detector at the Cornell Electron Storage Ring, we report the first observation of $D_{s}^{*+} \to D_{s}^{+} e^{+} e^{-}$ with a significance of $5.3 σ$. The ratio of branching fractions $\calB(D_{s}^{*+} \to D_{s}^{+} e^{+} e^{-}) / \calB(D_{s}^{*+} \to D_{s}^{+} γ)$ is measured to be… ▽ More Using 586 $\textrm{pb}^{-1}$ of $e^{+}e^{-}$ collision data acquired at $\sqrt{s}=4.170$ GeV with the CLEO-c detector at the Cornell Electron Storage Ring, we report the first observation of $D_{s}^{*+} \to D_{s}^{+} e^{+} e^{-}$ with a significance of $5.3 σ$. The ratio of branching fractions $\calB(D_{s}^{*+} \to D_{s}^{+} e^{+} e^{-}) / \calB(D_{s}^{*+} \to D_{s}^{+} γ)$ is measured to be $[ 0.72^{+0.15}_{-0.13} (\textrm{stat}) \pm 0.10 (\textrm{syst})]%$, which is consistent with theoretical expectations. △ Less

Submitted 16 April, 2011; originally announced April 2011.

Observation of the h_c(1P) using e^+e^- collisions above DDbar threshold

Authors: CLEO Collaboration, T. K. Pedlar, D. Cronin-Hennessy, J. Hietala, S. Dobbs, Z. Metreveli, K. K. Seth, A. Tomaradze, T. Xiao, L. Martin, A. Powell, G. Wilkinson, H. Mendez, J. Y. Ge, D. H. Miller, I. P. J. Shipsey, B. Xin, G. S. Adams, D. Hu, B. Moziak, J. Napolitano, K. M. Ecklund, J. Insler, H. Muramatsu, C. S. Park , et al. (55 additional authors not shown)

Abstract: Using 586pb^-1 of e^+e^- collision data at E_CM = 4170MeV, produced at the CESR collider and collected with the CLEO-c detector, we observe the process e^+e^- --> pi^+ pi^- h_c(1P). We measure its cross section to be 15.6+-2.3+-1.9+-3.0pb, where the third error is due to the external uncertainty on the branching fraction of psi(2S) --> pi^0 h_c(1P), which we use for normalization. We also find evi… ▽ More Using 586pb^-1 of e^+e^- collision data at E_CM = 4170MeV, produced at the CESR collider and collected with the CLEO-c detector, we observe the process e^+e^- --> pi^+ pi^- h_c(1P). We measure its cross section to be 15.6+-2.3+-1.9+-3.0pb, where the third error is due to the external uncertainty on the branching fraction of psi(2S) --> pi^0 h_c(1P), which we use for normalization. We also find evidence for e^+e^- --> eta h_c(1P) at 4170MeV at the 3sigma level, and see hints of a rise in the e^+e^- --> pi^+ pi^- h_c(1P) cross section at 4260MeV. △ Less

Submitted 30 August, 2011; v1 submitted 11 April, 2011; originally announced April 2011.

Comments: 9 pages, 4 figures, as published

Journal ref: Phys.Rev.Lett.107:041803,2011

Upsilon(1S)->gamma+f2'(1525); f2'(1525)->K0sK0s decays

Authors: The CLEO Collaboration, D. Besson, D. P. Hogan, T. K. Pedlar, D. Cronin-Hennessy, J. Hietala, P. Zweber, S. Dobbs, Z. Metreveli, K. K. Seth, A. Tomaradze, T. Xiao, S. Brisbane, L. Martin, A. Powell, P. Spradlin, G. Wilkinson, H. Mendez, J. Y. Ge, D. H. Miller, I. P. J. Shipsey, B. Xin, G. S. Adams, D. Hu, B. Moziak , et al. (61 additional authors not shown)

Abstract: We report on a study of exclusive radiative decays of the Upsilon(1S) resonance into a final state consisting of a photon and two K0s candidates. We find evidence for a signal for Upsilon(1S)->gamma f_2'(1525); f_2'(1525)->K0sK0s, at a rate (4.0+/-1.3+/-0.6)x10^{-5}, consistent with previous observations of Upsilon(1S)->gamma f_2'(1525); f_2'(1525)->K+K-, and isospin. Combining this branching frac… ▽ More We report on a study of exclusive radiative decays of the Upsilon(1S) resonance into a final state consisting of a photon and two K0s candidates. We find evidence for a signal for Upsilon(1S)->gamma f_2'(1525); f_2'(1525)->K0sK0s, at a rate (4.0+/-1.3+/-0.6)x10^{-5}, consistent with previous observations of Upsilon(1S)->gamma f_2'(1525); f_2'(1525)->K+K-, and isospin. Combining this branching fraction with existing branching fraction measurements of Upsilon(1S)->gamma f_2'(1525) and J/psi->gamma f_2'(1525), we obtain the ratio of branching fractions: B(Upsilon(1S)->gamma f_2'(1525))/B(J/psi->gamma f_2'(1525))=0.09+/-0.02, approximately consistent with expectations based on soft collinear effective theory. △ Less

Submitted 30 December, 2010; originally announced January 2011.

Comments: submitted to Brief Reports

Measurements of branching fractions for electromagnetic transitions involving the $χ_{bJ}(1P)$ states

Authors: The CLEO Collaboration, M. Kornicer, R. E. Mitchell, C. M. Tarbert, D. Besson, T. K. Pedlar, D. Cronin-Hennessy, J. Hietala, P. Zweber, S. Dobbs, Z. Metreveli, K. K. Seth, A. Tomaradze, T. Xiao, S. Brisbane, L. Martin, A. Powell, P. Spradlin, G. Wilkinson, H. Mendez, J. Y. Ge, D. H. Miller, I. P. J. Shipsey, B. Xin, G. S. Adams , et al. (60 additional authors not shown)

Abstract: Using 9.32, 5.88 million Upsilon(2S,3S) decays taken with the CLEO-III detector, we obtain five product branching fractions for the exclusive processes Upsilon(2S) => gamma chi_{b0,1,2}(1P) => gamma gamma Upsilon(1S) and Upsilon(3S) => gamma chi_{b1,2}(1P) => gamma gamma Upsilon(1S). We observe the transition chi_{b0}(1P) => gamma Upsilon(1S) for the first time. Using the known branching fractions… ▽ More Using 9.32, 5.88 million Upsilon(2S,3S) decays taken with the CLEO-III detector, we obtain five product branching fractions for the exclusive processes Upsilon(2S) => gamma chi_{b0,1,2}(1P) => gamma gamma Upsilon(1S) and Upsilon(3S) => gamma chi_{b1,2}(1P) => gamma gamma Upsilon(1S). We observe the transition chi_{b0}(1P) => gamma Upsilon(1S) for the first time. Using the known branching fractions for B[Upsilon(2S) => gamma chi_{bJ}(1P)], we extract values for B[chi_{bJ}(1P) => gamma Upsilon(1S)] for J=0, 1, 2. In turn, these values can be used to unfold the Upsilon(3S) product branching fractions to obtain values for B[Upsilon(3S) => gamma chi_{b1,2}(1P) for the first time individually. Comparison of these with each other and with the branching fraction B[Upsilon(3S) => gamma chi_{b0}] previously measured by CLEO provides tests of relativistic corrections to electric dipole matrix elements. △ Less

Submitted 16 March, 2011; v1 submitted 2 December, 2010; originally announced December 2010.

Comments: 22 pages, 6 figures, version published in Physical Review D

Report number: CLNS 10/2071, CLEO 10-08

Journal ref: Phys.Rev.D83:054003,2011

Studies of D^+ -> {eta', eta, phi} e^+ nu_e

Authors: CLEO Collaboration, J. Yelton, P. Rubin, N. Lowrey, S. Mehrabyan, M. Selen, J. Wiss, M. Kornicer, R. E. Mitchell, M. R. Shepherd, C. M. Tarbert, D. Besson, T. K. Pedlar, J. Xavier, D. Cronin-Hennessy, J. Hietala, P. Zweber, S. Dobbs, Z. Metreveli, K. K. Seth, A. Tomaradze, T. Xiao, S. Brisbane, J. Libby, L. Martin , et al. (63 additional authors not shown)

Abstract: We report the first observation of the decay D^+ -> eta' e^+ nu_e in two analyses, which combined provide a branching fraction of B(D+ -> eta' e nu) = (2.16 +/- 0.53 +/- 0.07) x 10^{-4}. We also provide an improved measurement of B(D+ -> eta e nu) = (11.4 +/- 0.9 +/- 0.4) x 10^{-4}, provide the first form factor measurement, and set the improved upper limit B(D+ -> phi e nu) < 0.9 x 10^{-4} (90% C… ▽ More We report the first observation of the decay D^+ -> eta' e^+ nu_e in two analyses, which combined provide a branching fraction of B(D+ -> eta' e nu) = (2.16 +/- 0.53 +/- 0.07) x 10^{-4}. We also provide an improved measurement of B(D+ -> eta e nu) = (11.4 +/- 0.9 +/- 0.4) x 10^{-4}, provide the first form factor measurement, and set the improved upper limit B(D+ -> phi e nu) < 0.9 x 10^{-4} (90% C.L.). △ Less

Submitted 20 May, 2011; v1 submitted 4 November, 2010; originally announced November 2010.

Comments: 15 pages, 6 figures, available through http://www.lns.cornell.edu/public/CLNS/, submitted to PRD. Minor edits, added appendix with fit results using alternate form factor parameterizations

Report number: CLNS 10/2067, CLEO 10-4

Journal ref: Phys.Rev.D84:032001,2011

Model-independent determination of the strong-phase difference between D^0 and D^0-bar-> K^0_S,L h^+ h^- (h=pi,K) and its impact on the measurement of the CKM angle gamma/phi_3

Authors: J. Libby, M. Kornicer, R. E. Mitchell, M. R. Shepherd, C. M. Tarbert, D. Besson, T. K. Pedlar, J. Xavier, D. Cronin-Hennessy, J. Hietala, P. Zweber, S. Dobbs, Z. Metreveli, K. K. Seth, A. Tomaradze, T. Xiao, S. Brisbane, S. Malde, L. Martin, A. Powell, P. Spradlin, G. Wilkinson, H. Mendez, J. Y. Ge, D. H. Miller , et al. (59 additional authors not shown)

Abstract: We report the first determination of the relative strong-phase difference between D^0 -> K^0_S,L K^+ K^- and D^0-bar -> K^0_S,L K^+ K^-. In addition, we present updated measurements of the relative strong-phase difference between D^0 -> K^0_S,L pi^+ pi^- and D^0-bar -> K^0_S,L pi^+ pi^-. Both measurements exploit the quantum coherence between a pair of D^0 and D^0-bar mesons produced from psi(3770… ▽ More We report the first determination of the relative strong-phase difference between D^0 -> K^0_S,L K^+ K^- and D^0-bar -> K^0_S,L K^+ K^-. In addition, we present updated measurements of the relative strong-phase difference between D^0 -> K^0_S,L pi^+ pi^- and D^0-bar -> K^0_S,L pi^+ pi^-. Both measurements exploit the quantum coherence between a pair of D^0 and D^0-bar mesons produced from psi(3770) decays. The strong-phase differences measured are important for determining the Cabibbo-Kobayashi-Maskawa angle gamma/phi_3 in B^- -> K^- D^0-tilde decays, where D^0-tilde is a D^0 or D^0-bar meson decaying to K^0_S h^+ h^- (h=pi,K), in a manner independent of the model assumed to describe the D^0 -> K^0_S h^+ h^- decay. Using our results, the uncertainty in gamma/phi_3 due to the error on the strong-phase difference is expected to be between 1.7 and 3.9 degrees for an analysis using B^- K^- D^0-tilde D^0-tilde -> K^0_S pi^+ pi^- decays, and between 3.2 and 3.9 degrees for an analysis based on B^- -> K^- D^0-tilde, D^0-tilde -> K^0_S K^+ K^- decays. A measurement is also presented of the CP-odd fraction, F_-, of the decay D^0 -> K^0_S K^+ K^- in the region of the phi -> K^+ K^- resonance. We find that in a region within 0.01 GeV^2/c^4 of the nominal phi mass squared F_- > 0.91 at the 90% confidence level. △ Less

Submitted 2 February, 2016; v1 submitted 13 October, 2010; originally announced October 2010.

Comments: 60 pages also available through http://www.lns.cornell.edu/public/CLNS/, accepted for publication in PRD

Report number: CLNS 10/2070, CLEO 10-07

Journal ref: Phys.Rev.D82:112006,2010

Search for rare and forbidden decays of charm and charmed-strange mesons to final states h^+- e^-+ e^+

Authors: CLEO Collaboration, P. Rubin, N. Lowrey, S. Mehrabyan, M. Selen, J. Wiss, J. Libby, M. Kornicer, R. E. Mitchell, M. R. Shepherd, C. M. Tarbert, D. Besson, T. K. Pedlar, J. Xavier, D. Cronin-Hennessy, J. Hietala, P. Zweber, S. Dobbs, Z. Metreveli, K. K. Seth, A. Tomaradze, T. Xiao, S. Brisbane, L. Martin, A. Powell , et al. (62 additional authors not shown)

Abstract: We have searched for flavor-changing neutral current decays and lepton-number-violating decays of D^+ and D^+_s mesons to final states of the form h^+- e^-+ e^+, where h is either πor K. We use the complete samples of CLEO-c open-charm data, corresponding to integrated luminosities of 818 pb^-1 at the center-of-mass energy E_CM = 3.774 GeV containing 2.4 x 10^6 D^+D^- pairs and 602 pb^-1 at E_CM =… ▽ More We have searched for flavor-changing neutral current decays and lepton-number-violating decays of D^+ and D^+_s mesons to final states of the form h^+- e^-+ e^+, where h is either πor K. We use the complete samples of CLEO-c open-charm data, corresponding to integrated luminosities of 818 pb^-1 at the center-of-mass energy E_CM = 3.774 GeV containing 2.4 x 10^6 D^+D^- pairs and 602 pb^-1 at E_CM = 4.170 GeV containing 0.6 x 10^6 D^*+-_s D^-+_s pairs. No signal is observed in any channel, and we obtain 90% confidence level upper limits on branching fractions B(D^+ --> π^+ e^+ e^-) < 5.9 x 10^-6, B(D^+ --> π^- e^+ e^+) < 1.1 x 10^-6, B(D^+ --> K^+ e^+ e^-) < 3.0 x 10^-6, B(D^+ --> K^- e^+ e^+) < 3.5 x 10^-6, B(D^+_s --> π^+ e^+ e^-) < 2.2 x 10^-5, B(D^+_s --> π^- e^+ e^+) < 1.8 x 10^-5, B(D^+_s --> K^+ e^+ e^-) < 5.2 x 10^-5, and B(D^+_s --> K^- e^+ e^+) < 1.7 x 10^-5. △ Less

Submitted 22 November, 2010; v1 submitted 8 September, 2010; originally announced September 2010.

Comments: 9 pages, available through http://www.lns.cornell.edu/public/CLNS/

Report number: CLNS 10/2068, CLEO 10-05

Journal ref: Phys.Rev.D82:092007,2010

Study of psi(2S) Decays to gamma p bar{p}, pi^0 p bar{p} and eta p bar{p} and Search for p bar{p} Threshold Enhancements

Authors: CLEO Collaboration, J. P. Alexander, D. G. Cassel, S. Das, R. Ehrlich, L. Fields, L. Gibbons, S. W. Gray, D. L. Hartill, B. K. Heltsley, D. L. Kreinick, V. E. Kuznetsov, J. R. Patterson, D. Peterson, D. Riley, A. Ryd, A. J. Sadoff, X. Shi, W. M. Sun, J. Yelton, P. Rubin, N. Lowrey, S. Mehrabyan, M. Selen, J. Wiss , et al. (63 additional authors not shown)

Abstract: The decays of psi(2S) into gamma p bar{p}, pi^0 p bar{p} and eta p bar{p} have been studied with the CLEO-c detector using a sample of 24.5 million psi(2S) events obtained from e^+e^- annihilations at sqrt{s} = 3686 MeV. The data show evidence for the excitation of several N^* resonances in p pi^0 and p eta channels in pi^0 p bar{p} and eta p bar{p} decays, and f_2 states in gamma p bar{p} decay.… ▽ More The decays of psi(2S) into gamma p bar{p}, pi^0 p bar{p} and eta p bar{p} have been studied with the CLEO-c detector using a sample of 24.5 million psi(2S) events obtained from e^+e^- annihilations at sqrt{s} = 3686 MeV. The data show evidence for the excitation of several N^* resonances in p pi^0 and p eta channels in pi^0 p bar{p} and eta p bar{p} decays, and f_2 states in gamma p bar{p} decay. Branching fractions for decays of psi(2S) to gamma p bar{p}, pi^0 p bar{p} and eta p bar{p} have been determined. No evidence for p bar{p} threshold enhancements was found in the reactions psi(2S)-> X p bar{p}, where X = gamma, pi^0, eta. We do, however, find confirming evidence for a p bar{p} threshold enhancement in J/psi-> gamma p bar{p} as previously reported by BES. △ Less

Submitted 12 October, 2010; v1 submitted 16 July, 2010; originally announced July 2010.

Comments: 25 pages, 21 figures, accepted by PRD

Report number: CLNS 10/2065, CLEO 10-03

Journal ref: Phys.Rev.D82:092002,2010

Branching fractions for chi_cJ -> p p-bar pi^0, p p-bar eta, and p p-bar omega

Authors: CLEO Collaboration, P. U. E. Onyisi, J. L. Rosner, J. P. Alexander, D. G. Cassel, S. Das, R. Ehrlich, L. Fields, L. Gibbons, S. W. Gray, D. L. Hartill, B. K. Heltsley, J. M. Hunt, D. L. Kreinick, V. E. Kuznetsov, J. Ledoux, J. R. Patterson, D. Peterson, D. Riley, A. Ryd, A. J. Sadoff, X. Shi, W. M. Sun, J. Yelton, P. Rubin , et al. (67 additional authors not shown)

Abstract: Using a sample of 25.9 million psi(2S) decays acquired with the CLEO-c detector at the CESR e^+e^- collider, we report branching fractions for the decays chi_cJ -> p p-bar pi^0, p p-bar eta, and p p-bar omega, with J=0,1,2. Our results for B(chi_cJ-> p p-bar pi^0) and B(chi_cJ-> p p-bar eta) are consistent with, but more precise than, previous measurements. Furthermore, we include the first measur… ▽ More Using a sample of 25.9 million psi(2S) decays acquired with the CLEO-c detector at the CESR e^+e^- collider, we report branching fractions for the decays chi_cJ -> p p-bar pi^0, p p-bar eta, and p p-bar omega, with J=0,1,2. Our results for B(chi_cJ-> p p-bar pi^0) and B(chi_cJ-> p p-bar eta) are consistent with, but more precise than, previous measurements. Furthermore, we include the first measurement of B(chi_cJ-> p p-bar omega). △ Less

Submitted 28 May, 2010; originally announced May 2010.

Comments: 11 pages, 5 figures, available through http://www.lns.cornell.edu/public/CLNS/, submitted to PRD(R)

Report number: CLNS 10/2064

Journal ref: Phys.Rev.D82:011103,2010

Analysis of D+ to K- pi+ e+ nu_e and D+ to K- pi+ mu+ nu_mu Semileptonic Decays

Authors: CLEO Collaboration, R. A. Briere, H. Vogel, P. U. E. Onyisi, J. L. Rosner, J. P. Alexander, D. G. Cassel, S. Das, R. Ehrlich, L. Fields, L. Gibbons, S. W. Gray, D. L. Hartill, B. K. Heltsley, J. M. Hunt, D. L. Kreinick, V. E. Kuznetsov, J. Ledoux, J. R. Patterson, D. Peterson, D. Riley, A. Ryd, A. J. Sadoff, X. Shi, W. M. Sun , et al. (67 additional authors not shown)

Abstract: Using a large sample (~11800 events) of D^+ into K^- pi^+ e^+ nu_e and D^+ into K^- pi^+ mu^+ nu_mu decays collected by the CLEO-c detector running at the psi(3770), we measure the helicity basis form factors free from the assumptions of spectroscopic pole dominance and provide new, accurate measurements of the absolute branching fractions for D^+ into K^- pi^+ e^+ nu_e and D^+ into K^- pi^+… ▽ More Using a large sample (~11800 events) of D^+ into K^- pi^+ e^+ nu_e and D^+ into K^- pi^+ mu^+ nu_mu decays collected by the CLEO-c detector running at the psi(3770), we measure the helicity basis form factors free from the assumptions of spectroscopic pole dominance and provide new, accurate measurements of the absolute branching fractions for D^+ into K^- pi^+ e^+ nu_e and D^+ into K^- pi^+ mu^+ nu_mu decays. We find branching fractions which are consistent with previous world averages. Our measured helicity basis form factors are consistent with the spectroscopic pole dominance predictions for the three main helicity basis form factors describing D^+ into anti-K*0 ell^+ nu_mu decay. The ability to analyze D^+ into K^- pi^+ mu^+ nu_mu allows us to make the first non-parametric measurements of the mass-suppressed form factor. Our result is inconsistent with existing Lattice QCD calculations. Finally, we measure the form factor that controls non-resonant s-wave interference with the D^+ into anti-K*0 ell^+ nu_mu amplitude and search for evidence of possible additional non-resonant d-wave or f-wave interference with the anti-K*0. △ Less

Submitted 22 April, 2010; v1 submitted 12 April, 2010; originally announced April 2010.

Comments: We have made the replacement in order to make it clear that the branching fractions that we report are actually for D+ --> antiK*0 L+ nu decay. Hence, the branching fractions for D+ --> K+ pi L+ nu that we measure are corrected for the missing antiK*0 --> anti-K0 pi0 decay mode of the anti-K*0. We feel that this clarification is necessary.

Report number: CLNS 10/2063

Journal ref: Phys.Rev.D81:112001,2010

Measurement of the eta_b(1S) mass and the branching fraction for Upsilon(3S) --> gamma eta_b(1S)

Authors: The CLEO Collaboration, G. Bonvicini, D. Cinabro, A. Lincoln, M. J. Smith, P. Zhou, J. Zhu, P. Naik, J. Rademacker, D. M. Asner, K. W. Edwards, J. Reed, A. N. Robichaud, G. Tatishvili, E. J. White, R. A. Briere, H. Vogel, P. U. E. Onyisi, J. L. Rosner, J. P. Alexander, D. G. Cassel, R. Ehrlich, L. Fields, R. S. Galik, L. Gibbons , et al. (69 additional authors not shown)

Abstract: We report evidence for the ground state of bottomonium, eta_b(1S), in the radiative decay Upsilon(3S) --> gamma eta_b in e^+e^- annihilation data taken with the CLEO III detector. Using 6 million Upsilon(3S) decays, and assuming Gamma(eta_b) = 10 MeV/c^2, we obtain B(Upsilon(3S) --> gamma eta_b) = (7.1 +- 1.8 +- 1.1) X 10^{-4}, where the first error is statistical and the second is systematic. T… ▽ More We report evidence for the ground state of bottomonium, eta_b(1S), in the radiative decay Upsilon(3S) --> gamma eta_b in e^+e^- annihilation data taken with the CLEO III detector. Using 6 million Upsilon(3S) decays, and assuming Gamma(eta_b) = 10 MeV/c^2, we obtain B(Upsilon(3S) --> gamma eta_b) = (7.1 +- 1.8 +- 1.1) X 10^{-4}, where the first error is statistical and the second is systematic. The statistical significance is about 4 sigma. The mass is determined to be M(eta_b) = 9391.8 +- 6.6 +- 2.0 MeV/c^2, which corresponds to the hyperfine splitting Delta M_{hf}(1S)_b = 68.5 +- 6.6 +- 2.0 MeV/c^2. Using 9 million Upsilon(2S) decays, we place an upper limit on the corresponding Y(2S) decay, B(Y(2S) --> gamma eta_b) < 8.4 X 10^{-4} at 90 % confidence level. △ Less

Submitted 8 February, 2010; v1 submitted 29 September, 2009; originally announced September 2009.

Comments: 10 pages, 3 figures, accepted by Phyical Review D Rapid Communications

Report number: CLNS 09/2060, CLEO 09-13

Journal ref: Phys.Rev.D81:031104,2010