-
Phase-Binarized Spintronic Oscillators for Combinatorial Optimization, and Comparison with Alternative Classical and Quantum Methods
Authors:
Neha Garg,
Sanyam Singhal,
Nakul Aggarwal,
Aniket Sadashiva,
Pranaba K. Muduli,
Debanjan Bhowmik
Abstract:
Solving combinatorial optimization problems efficiently through emerging hardware by converting the problem to its equivalent Ising model and obtaining its ground state is known as Ising computing. Phase-binarized oscillators (PBO), modeled through the Kuramoto model, have been proposed for Ising computing, and various device technologies have been used to experimentally implement such PBOs. In th…
▽ More
Solving combinatorial optimization problems efficiently through emerging hardware by converting the problem to its equivalent Ising model and obtaining its ground state is known as Ising computing. Phase-binarized oscillators (PBO), modeled through the Kuramoto model, have been proposed for Ising computing, and various device technologies have been used to experimentally implement such PBOs. In this paper, we show that an array of four dipole-coupled uniform-mode spin Hall nano oscillators (SHNOs) can be used to implement such PBOs and solve the NP-Hard combinatorial problem MaxCut on 4-node complete weighted graphs. We model the spintronic oscillators through two techniques: an approximate model for coupled magnetization dynamics of spin oscillators, and Landau Lifshitz Gilbert Slonckzweski (LLGS) equation-based more accurate magnetization dynamics modeling of such oscillators. Next, we compare the performance of these room-temperature-operating spin oscillators, as well as generalized PBOs, with two other alternative methods that solve the same MaxCut problem: a classical approximation algorithm, known as Goemans-Williamson's (GW) algorithm, and a Noisy Intermediate Scale Quantum (NISQ) algorithm, known as Quantum Approximation Optimization Algorithm (QAOA). For four types of graphs, with graph size up to twenty nodes, we show that approximation ratio (AR) and success probability (SP) obtained for generalized PBOs (Kuramoto model), as well as spin oscillators, are comparable to that for GW and much higher than that of QAOA for almost all graph instances. Moreover, unlike GW, the time to solution (TTS) for generalized PBOs and spin oscillators does not grow with graph size for the instances we have explored. This can be a major advantage for PBOs in general and spin oscillators specifically for solving these types of problems, along with the accuracy of solutions they deliver.
△ Less
Submitted 6 November, 2023; v1 submitted 26 June, 2023;
originally announced June 2023.
-
Advanced LIGO, LISA, and Cosmic Explorer as dark matter transducers
Authors:
Evan Hall,
Nancy Aggarwal
Abstract:
We present a method to search for scalar field ultralight dark matter directly interacting with gravitational-wave interferometers via a modulation of the fine structure constant and the electron mass. This modulation induces an effective strain in solid materials at a frequency determined by the mass of the dark matter particle. We study the prospects for looking for such an effect in the LIGO de…
▽ More
We present a method to search for scalar field ultralight dark matter directly interacting with gravitational-wave interferometers via a modulation of the fine structure constant and the electron mass. This modulation induces an effective strain in solid materials at a frequency determined by the mass of the dark matter particle. We study the prospects for looking for such an effect in the LIGO detectors by using the solid cavity which is nominally used for pre-stabilizing the laser frequency and we project upper limits. We contextualize them with previous limits from GEO600, possible limits from a similar strain in the LIGO beamsplitter, and with potential limits from upcoming experiments like LISA, Cosmic Explorer and from an upgraded solid cavity. We find that with the sensitivity of Advanced LIGO, competitive upper limits on DM coupling can be placed at the level of $\left\vert d_{m_e}+d_e\right\vert \sim 0.2$ for $m_\text{DM} \sim 10^{-13}\,\mathrm{eV}/\mathrm{c}^2$ with a combination of two searches using the solid cavity and the beamsplitter in LIGO; future experiments could reduce this upper limit to $\sim10^{-3}$.
△ Less
Submitted 31 October, 2022;
originally announced October 2022.
-
Graph Neural Networks for Low-Energy Event Classification & Reconstruction in IceCube
Authors:
R. Abbasi,
M. Ackermann,
J. Adams,
N. Aggarwal,
J. A. Aguilar,
M. Ahlers,
M. Ahrens,
J. M. Alameddine,
A. A. Alves Jr.,
N. M. Amin,
K. Andeen,
T. Anderson,
G. Anton,
C. Argüelles,
Y. Ashida,
S. Athanasiadou,
S. Axani,
X. Bai,
A. Balagopal V.,
M. Baricevic,
S. W. Barwick,
V. Basu,
R. Bay,
J. J. Beatty,
K. -H. Becker
, et al. (359 additional authors not shown)
Abstract:
IceCube, a cubic-kilometer array of optical sensors built to detect atmospheric and astrophysical neutrinos between 1 GeV and 1 PeV, is deployed 1.45 km to 2.45 km below the surface of the ice sheet at the South Pole. The classification and reconstruction of events from the in-ice detectors play a central role in the analysis of data from IceCube. Reconstructing and classifying events is a challen…
▽ More
IceCube, a cubic-kilometer array of optical sensors built to detect atmospheric and astrophysical neutrinos between 1 GeV and 1 PeV, is deployed 1.45 km to 2.45 km below the surface of the ice sheet at the South Pole. The classification and reconstruction of events from the in-ice detectors play a central role in the analysis of data from IceCube. Reconstructing and classifying events is a challenge due to the irregular detector geometry, inhomogeneous scattering and absorption of light in the ice and, below 100 GeV, the relatively low number of signal photons produced per event. To address this challenge, it is possible to represent IceCube events as point cloud graphs and use a Graph Neural Network (GNN) as the classification and reconstruction method. The GNN is capable of distinguishing neutrino events from cosmic-ray backgrounds, classifying different neutrino event types, and reconstructing the deposited energy, direction and interaction vertex. Based on simulation, we provide a comparison in the 1-100 GeV energy range to the current state-of-the-art maximum likelihood techniques used in current IceCube analyses, including the effects of known systematic uncertainties. For neutrino event classification, the GNN increases the signal efficiency by 18% at a fixed false positive rate (FPR), compared to current IceCube methods. Alternatively, the GNN offers a reduction of the FPR by over a factor 8 (to below half a percent) at a fixed signal efficiency. For the reconstruction of energy, direction, and interaction vertex, the resolution improves by an average of 13%-20% compared to current maximum likelihood techniques in the energy range of 1-30 GeV. The GNN, when run on a GPU, is capable of processing IceCube events at a rate nearly double of the median IceCube trigger rate of 2.7 kHz, which opens the possibility of using low energy neutrinos in online searches for transient events.
△ Less
Submitted 11 October, 2022; v1 submitted 7 September, 2022;
originally announced September 2022.
-
Optical trapping of high-aspect-ratio NaYF hexagonal prisms for kHz-MHz gravitational wave detectors
Authors:
George Winstone,
Zhiyuan Wang,
Shelby Klomp,
Greg Felsted,
Andrew Laeuger,
Daniel Grass,
Nancy Aggarwal,
Jacob Sprague,
Peter J. Pauzauskie,
Shane L. Larson,
Vicky Kalogera,
Andrew A. Geraci
Abstract:
We present experimental results on optical trapping of Yb-doped $β-$NaYF sub-wavelength-thickness high-aspect-ratio hexagonal prisms with a micron-scale radius. The prisms are trapped in vacuum using an optical standing wave, oriented with the normal vector to their face along the beam propagation direction, and exhibit characteristic modes of three translational and two torsional degrees of freed…
▽ More
We present experimental results on optical trapping of Yb-doped $β-$NaYF sub-wavelength-thickness high-aspect-ratio hexagonal prisms with a micron-scale radius. The prisms are trapped in vacuum using an optical standing wave, oriented with the normal vector to their face along the beam propagation direction, and exhibit characteristic modes of three translational and two torsional degrees of freedom. The measured motional spectra are compared with numerical simulations. This plate-like geometry simultaneously enables trapping with low photon-recoil-heating, high mass, and high trap frequency, potentially leading to advances in high frequency gravitational wave searches in the Levitated Sensor Detector (LSD), currently under construction. The material used here has previously been shown to exhibit internal cooling via laser refrigeration when optically trapped and illuminated with light of suitable wavelength. Employing such laser refrigeration methods in the context of our work may enable higher trapping intensity thus and higher trap frequencies for gravitational wave searches approaching the several hundred kHz range.
△ Less
Submitted 25 April, 2022; v1 submitted 22 April, 2022;
originally announced April 2022.
-
Passive Laser Power Stabilization via an Optical Spring
Authors:
Torrey Cullen,
Scott Aronson,
Ron Pagano,
Marina Trad Nery,
Henry Cain,
Jonathon Cripe,
Garret D. Cole,
Safura Sharifi,
Nancy Aggarwal,
Benno Wilke,
Thomas Corbitt
Abstract:
Metrology experiments can be limited by the noise produced by the laser involved via small fluctuations in the laser's power or frequency. Typically, active power stabilization schemes consisting of an in-loop sensor and a feedback control loop are employed. Those schemes are fundamentally limited by shot noise coupling at the in-loop sensor. In this letter we propose to use the optical spring eff…
▽ More
Metrology experiments can be limited by the noise produced by the laser involved via small fluctuations in the laser's power or frequency. Typically, active power stabilization schemes consisting of an in-loop sensor and a feedback control loop are employed. Those schemes are fundamentally limited by shot noise coupling at the in-loop sensor. In this letter we propose to use the optical spring effect to passively stabilize the classical power fluctuations of a laser beam. In a proof of principle experiment, we show that the relative power noise of the laser is stabilized from approximately $2 \times 10^{-5}$ Hz$^{-1/2}$ to a minimum value of $1.6 \times 10^{-7}$ Hz$^{-1/2}$, corresponding to the power noise reduction by a factor of $125$. The bandwidth at which stabilization occurs ranges from $400$ Hz to $100$ kHz. The work reported in this letter further paves the way for high power laser stability techniques which could be implemented in optomechanical experiments and in gravitational wave detectors.
△ Less
Submitted 31 March, 2022;
originally announced April 2022.
-
Axion Dark Matter
Authors:
C. B. Adams,
N. Aggarwal,
A. Agrawal,
R. Balafendiev,
C. Bartram,
M. Baryakhtar,
H. Bekker,
P. Belov,
K. K. Berggren,
A. Berlin,
C. Boutan,
D. Bowring,
D. Budker,
A. Caldwell,
P. Carenza,
G. Carosi,
R. Cervantes,
S. S. Chakrabarty,
S. Chaudhuri,
T. Y. Chen,
S. Cheong,
A. Chou,
R. T. Co,
J. Conrad,
D. Croon
, et al. (130 additional authors not shown)
Abstract:
Axions are well-motivated dark matter candidates with simple cosmological production mechanisms. They were originally introduced to solve the strong CP problem, but also arise in a wide range of extensions to the Standard Model. This Snowmass white paper summarizes axion phenomenology and outlines next-generation laboratory experiments proposed to detect axion dark matter. There are vibrant synerg…
▽ More
Axions are well-motivated dark matter candidates with simple cosmological production mechanisms. They were originally introduced to solve the strong CP problem, but also arise in a wide range of extensions to the Standard Model. This Snowmass white paper summarizes axion phenomenology and outlines next-generation laboratory experiments proposed to detect axion dark matter. There are vibrant synergies with astrophysical searches and advances in instrumentation including quantum-enabled readout, high-Q resonators and cavities and large high-field magnets. This white paper outlines a clear roadmap to discovery, and shows that the US is well-positioned to be at the forefront of the search for axion dark matter in the coming decade.
△ Less
Submitted 29 March, 2023; v1 submitted 28 March, 2022;
originally announced March 2022.
-
Identifying Influential Nodes in Weighted Networks using k-shell based HookeRank Algorithm
Authors:
Nipun Aggarwal,
Sanjay Kumar
Abstract:
Finding influential spreaders is a crucial task in the field of network analysis because of numerous theoretical and practical importance. These nodes play vital roles in the information diffusion process, like viral marketing. Many real-life networks are weighted networks, but relatively less work has been done for finding influential nodes in the case of weighted networks as compared to unweight…
▽ More
Finding influential spreaders is a crucial task in the field of network analysis because of numerous theoretical and practical importance. These nodes play vital roles in the information diffusion process, like viral marketing. Many real-life networks are weighted networks, but relatively less work has been done for finding influential nodes in the case of weighted networks as compared to unweighted networks. In this paper, we propose a k-shell-based HookeRank (KSHR) algorithm to identify spreaders in weighted networks. First, we propose weighted k-shell centrality of the node u by using the k-shell value of $u$, the k-shell value of its neighbors ($v$), and edge weight ($w_{uv}$) between them. We model edges present in the network as springs and edge weights as spring constants. Based on the notion of Hooke's law of elasticity, we assume a force equal to the weighted k-shell value acts on each node. In this arrangement, we formulate the KSHR centrality of each node using associated weighted k-shell value and the equivalent edge weight by taking care of series and parallel combination of edges up to 3-hop neighbors from the source node. The proposed algorithm finds influential nodes that can spread the information to the maximum number of nodes in the network. We compare our proposed algorithm with popular existing algorithms and observe that it outperforms them on many real-life and synthetic networks suing Susceptible-Infected-Recovered (SIR) information diffusion model.
△ Less
Submitted 23 January, 2021;
originally announced February 2021.
-
Branching Quantum Convolutional Neural Networks
Authors:
Ian MacCormack,
Conor Delaney,
Alexey Galda,
Nidhi Aggarwal,
Prineha Narang
Abstract:
Neural network-based algorithms have garnered considerable attention in condensed matter physics for their ability to learn complex patterns from very high dimensional data sets towards classifying complex long-range patterns of entanglement and correlations in many-body quantum systems. Small-scale quantum computers are already showing potential gains in learning tasks on large quantum and very l…
▽ More
Neural network-based algorithms have garnered considerable attention in condensed matter physics for their ability to learn complex patterns from very high dimensional data sets towards classifying complex long-range patterns of entanglement and correlations in many-body quantum systems. Small-scale quantum computers are already showing potential gains in learning tasks on large quantum and very large classical data sets. A particularly interesting class of algorithms, the quantum convolutional neural networks (QCNN) could learn features of a quantum data set by performing a binary classification task on a nontrivial phase of quantum matter. Inspired by this promise, we present a generalization of QCNN, the branching quantum convolutional neural network, or bQCNN, with substantially higher expressibility. A key feature of bQCNN is that it leverages mid-circuit (intermediate) measurement results, realizable on current trapped-ion systems, obtained in pooling layers to determine which sets of parameters will be used in the subsequent convolutional layers of the circuit. This results in a branching structure, which allows for a greater number of trainable variational parameters in a given circuit depth. This is of particular use on current-day NISQ devices, where circuit depth is limited by gate noise. We present an overview of the ansatz structure and scaling, and provide evidence of its enhanced expressibility compared to QCNN. Using artificially-constructed large data sets of training states as a proof-of-concept we demonstrate the existence of training tasks in which bQCNN far outperforms an ordinary QCNN. Finally, we present future directions where the classical branching structure and increased density of trainable parameters in bQCNN would be particularly valuable.
△ Less
Submitted 28 December, 2020;
originally announced December 2020.
-
Characterization of magnetic field noise in the ARIADNE source mass rotor
Authors:
Nancy Aggarwal,
Allard Schnabel,
Jens Voigt,
Alex Brown,
Josh C Long,
L. Trahms,
A. Fang,
Andrew Geraci,
A. Kapitulnik,
D. Kim,
Y. Kim,
I. Lee,
Y. H. Lee,
C. Y. Liu,
C. Lohmeyer,
A. Reid,
Y. Semertzidis,
Y. Shin,
J. Shortino,
E. Smith,
W. M. Snow,
E. Weisman
Abstract:
ARIADNE is a nuclear-magnetic-resonance-based experiment that will search for novel axion-induced spin-dependent interactions between an unpolarized source mass rotor and a nearby sample of spin-polarized $^3$He gas. To detect feeble axion signals at the sub-atto-Tesla level, the experiment relies on low magnetic background and noise. We measure and characterize the magnetic field background from…
▽ More
ARIADNE is a nuclear-magnetic-resonance-based experiment that will search for novel axion-induced spin-dependent interactions between an unpolarized source mass rotor and a nearby sample of spin-polarized $^3$He gas. To detect feeble axion signals at the sub-atto-Tesla level, the experiment relies on low magnetic background and noise. We measure and characterize the magnetic field background from a prototype tungsten rotor. We show that the requirement is met with our current level of tungsten purity and demagnetization process. We further show that the noise is dominantly caused by a few discrete dipoles, likely due to a few impurities trapped inside the rotor during manufacturing. This is done via a numerical optimization pipeline which fits for the locations and magnetic moments of each dipole. We find that under the current demagnetization, the magnetic moment of trapped impurities is bounded at $10^{-9} \mathrm{A}\mathrm{m}^2$.
△ Less
Submitted 25 November, 2020;
originally announced November 2020.
-
Source mass characterization in the ARIADNE axion experiment
Authors:
Chloe Lohmeyer,
Nancy Aggarwal,
Asimina Arvanitaki,
Alex Brown,
Alan Fang,
Andrew A Geraci,
Aharon Kapitulnik,
Dongok Kim,
Younggeun Kim,
Inbum Lee,
Yong Ho Lee,
Eli Levenson-Falk,
Chen Yu Liu,
Josh C Long,
Sam Mumford,
Austin Reid,
Allard Schnabel,
Yannis Semertzidis,
Yun Shin,
Justin Shortino,
Eric Smith,
William M Snow,
Lutz Trahms,
Jens Voigt,
Evan Weisman
Abstract:
The Axion Resonant InterAction Detection Experiment (ARIADNE) is a collaborative effort to search for the QCD axion using nuclear magnetic resonance (NMR), where the axion acts as a mediator of spin-dependent forces between an unpolarized tungsten source mass and a sample of polarized helium-3 gas. Since the experiment involves precision measurement of a small magnetization, it relies on limiting…
▽ More
The Axion Resonant InterAction Detection Experiment (ARIADNE) is a collaborative effort to search for the QCD axion using nuclear magnetic resonance (NMR), where the axion acts as a mediator of spin-dependent forces between an unpolarized tungsten source mass and a sample of polarized helium-3 gas. Since the experiment involves precision measurement of a small magnetization, it relies on limiting ordinary magnetic noise with superconducting magnetic shielding. In addition to the shielding, proper characterization of the noise level from other sources is crucial. We investigate one such noise source in detail: the magnetic noise due to impurities and Johnson noise in the tungsten source mass.
△ Less
Submitted 19 November, 2020;
originally announced November 2020.
-
Spectral DiffuserCam: lensless snapshot hyperspectral imaging with a spectral filter array
Authors:
Kristina Monakhova,
Kyrollos Yanny,
Neerja Aggarwal,
Laura Waller
Abstract:
Hyperspectral imaging is useful for applications ranging from medical diagnostics to agricultural crop monitoring; however, traditional scanning hyperspectral imagers are prohibitively slow and expensive for widespread adoption. Snapshot techniques exist but are often confined to bulky benchtop setups or have low spatio-spectral resolution. In this paper, we propose a novel, compact, and inexpensi…
▽ More
Hyperspectral imaging is useful for applications ranging from medical diagnostics to agricultural crop monitoring; however, traditional scanning hyperspectral imagers are prohibitively slow and expensive for widespread adoption. Snapshot techniques exist but are often confined to bulky benchtop setups or have low spatio-spectral resolution. In this paper, we propose a novel, compact, and inexpensive computational camera for snapshot hyperspectral imaging. Our system consists of a tiled spectral filter array placed directly on the image sensor and a diffuser placed close to the sensor. Each point in the world maps to a unique pseudorandom pattern on the spectral filter array, which encodes multiplexed spatio-spectral information. By solving a sparsity-constrained inverse problem, we recover the hyperspectral volume with sub-super-pixel resolution. Our hyperspectral imaging framework is flexible and can be designed with contiguous or non-contiguous spectral filters that can be chosen for a given application. We provide theory for system design, demonstrate a prototype device, and present experimental results with high spatio-spectral resolution.
△ Less
Submitted 28 September, 2020; v1 submitted 15 June, 2020;
originally announced June 2020.
-
Room temperature optomechanical squeezing
Authors:
Nancy Aggarwal,
Torrey Cullen,
Jonathan Cripe,
Garrett D. Cole,
Robert Lanza,
Adam Libson,
David Follman,
Paula Heu,
Thomas Corbitt,
Nergis Mavalvala
Abstract:
The radiation-pressure driven interaction of a coherent light field with a mechanical oscillator induces correlations between the amplitude and phase quadratures of the light. These correlations result in squeezed light -- light with quantum noise lower than shot noise in some quadratures, and higher in others. Due to this lower quantum uncertainty, squeezed light can be used to improve the sensit…
▽ More
The radiation-pressure driven interaction of a coherent light field with a mechanical oscillator induces correlations between the amplitude and phase quadratures of the light. These correlations result in squeezed light -- light with quantum noise lower than shot noise in some quadratures, and higher in others. Due to this lower quantum uncertainty, squeezed light can be used to improve the sensitivity of precision measurements. In particular, squeezed light sources based on nonlinear optical crystals are being used to improve the sensitivity of gravitational wave (GW) detectors. For optomechanical squeezers, thermally driven fluctuations of the mechanical oscillator's position makes it difficult to observe the quantum correlations at room temperature, and at low frequencies. Here we present a measurement of optomechanically (OM) squeezed light, performed at room-temperature, in a broad band near audio-frequency regions relevant to GW detectors. We observe sub-poissonian quantum noise in a frequency band of 30 kHz to 70 kHz with a maximum reduction of 0.7 $\pm$ 0.1 dB below shot noise at 45 kHz. We present two independent methods of measuring this squeezing, one of which does not rely on calibration of shot noise.
△ Less
Submitted 24 December, 2018;
originally announced December 2018.
-
Radiation-Pressure-Mediated Control of an Optomechanical Cavity
Authors:
Jonathan Cripe,
Nancy Aggarwal,
Robinjeet Singh,
Robert Lanza,
Adam Libson,
Min Jet Yap,
Garrett D. Cole,
David E. McClelland,
Nergis Mavalvala,
Thomas Corbitt
Abstract:
We describe and demonstrate a method to control a detuned movable-mirror Fabry-Perot cavity using radiation pressure in the presence of a strong optical spring. At frequencies below the optical spring resonance, self-locking of the cavity is achieved intrinsically by the optomechanical (OM) interaction between the cavity field and the movable end mirror. The OM interaction results in a high rigidi…
▽ More
We describe and demonstrate a method to control a detuned movable-mirror Fabry-Perot cavity using radiation pressure in the presence of a strong optical spring. At frequencies below the optical spring resonance, self-locking of the cavity is achieved intrinsically by the optomechanical (OM) interaction between the cavity field and the movable end mirror. The OM interaction results in a high rigidity and reduced susceptibility of the mirror to external forces. However, due to a finite delay time in the cavity, this enhanced rigidity is accompanied by an anti-damping force, which destabilizes the cavity. The cavity is stabilized by applying external feedback in a frequency band around the optical spring resonance. The error signal is sensed in the amplitude quadrature of the transmitted beam with a photodetector. An amplitude modulator in the input path to the cavity modulates the light intensity to provide the stabilizing radiation pressure force.
△ Less
Submitted 4 December, 2017; v1 submitted 12 October, 2017;
originally announced October 2017.
-
Calibration of the Advanced LIGO detectors for the discovery of the binary black-hole merger GW150914
Authors:
The LIGO Scientific Collaboration,
B. P. Abbott,
R. Abbott,
T. D. Abbott,
M. R. Abernathy,
K. Ackley,
C. Adams,
P. Addesso,
R. X. Adhikari,
V. B. Adya,
C. Affeldt,
N. Aggarwal,
O. D. Aguiar,
A. Ain,
P. Ajith,
B. Allen,
P. A. Altin,
D. V. Amariutei,
S. B. Anderson,
W. G. Anderson,
K. Arai,
M. C. Araya,
C. C. Arceneaux,
J. S. Areeda,
K. G. Arun
, et al. (702 additional authors not shown)
Abstract:
In Advanced LIGO, detection and astrophysical source parameter estimation of the binary black hole merger GW150914 requires a calibrated estimate of the gravitational-wave strain sensed by the detectors. Producing an estimate from each detector's differential arm length control loop readout signals requires applying time domain filters, which are designed from a frequency domain model of the detec…
▽ More
In Advanced LIGO, detection and astrophysical source parameter estimation of the binary black hole merger GW150914 requires a calibrated estimate of the gravitational-wave strain sensed by the detectors. Producing an estimate from each detector's differential arm length control loop readout signals requires applying time domain filters, which are designed from a frequency domain model of the detector's gravitational-wave response. The gravitational-wave response model is determined by the detector's opto-mechanical response and the properties of its feedback control system. The measurements used to validate the model and characterize its uncertainty are derived primarily from a dedicated photon radiation pressure actuator, with cross-checks provided by optical and radio frequency references. We describe how the gravitational-wave readout signal is calibrated into equivalent gravitational-wave-induced strain and how the statistical uncertainties and systematic errors are assessed. Detector data collected over 38 calendar days, from September 12 to October 20, 2015, contain the event GW150914 and approximately 16 of coincident data used to estimate the event false alarm probability. The calibration uncertainty is less than 10% in magnitude and 10 degrees in phase across the relevant frequency band 20 Hz to 1 kHz.
△ Less
Submitted 28 February, 2017; v1 submitted 11 February, 2016;
originally announced February 2016.
-
Simple Pendulum Revisited
Authors:
Neha Aggarwal,
Nitin Verma,
P. Arun
Abstract:
We describe a 8085 microprocessor interface developed to make reliable time period measurements. The time period of each oscillation of a simple pendulum was measured using this interface. The variation of the time period with increasing oscillation was studied for the simple harmonic motion (SHM) and for large angle initial displacements (non-SHM). The results underlines the importance of the p…
▽ More
We describe a 8085 microprocessor interface developed to make reliable time period measurements. The time period of each oscillation of a simple pendulum was measured using this interface. The variation of the time period with increasing oscillation was studied for the simple harmonic motion (SHM) and for large angle initial displacements (non-SHM). The results underlines the importance of the precautions which the students are asked to take while performing the pendulum experiment.
△ Less
Submitted 17 September, 2004;
originally announced September 2004.