-
Taylor cones of ionic liquids from capillary tubes as sources of pure ions: The role of surface tension and electrical conductivity
Authors:
David Garoz,
C. Bueno,
C. Larriba,
S. Castro,
I. Romero-Sanz,
J. Fernandez de la Mora,
Y. Yoshida,
G. Saito
Abstract:
The emissions of Taylor cones from a wide range of ionic liquids (ILs) have been tested in vacuo in an attempt to identify what physical properties favor the purely ionic regime (PIR). This regime is well known in the case of Taylor cones of liquid metals. For nonmetallic liquids, it has been previously observed in conventional (capillary tube) electrospray sources at room temperature only for the…
▽ More
The emissions of Taylor cones from a wide range of ionic liquids (ILs) have been tested in vacuo in an attempt to identify what physical properties favor the purely ionic regime (PIR). This regime is well known in the case of Taylor cones of liquid metals. For nonmetallic liquids, it has been previously observed in conventional (capillary tube) electrospray sources at room temperature only for the room temperature molten salt (ionic liquid) EMI-BF4 (EMI=1-ethyl-3-methylimidazolium). A large number of other ILs and their mixtures have been studied here, most of which (but not all) are unable to reach the PIR at room temperature. Based on these results and additional theoretical considerations, strong support is assembled for the notion that the PIR is favored by ILs not only of high electrical conductivity but also of high surface tension. This hypothesis is confirmed by tests with three recently synthesized ILs, EMI-GaCl4, EMI-C(CN)3, and EMI-N(CN)2, all of which combine exceptional surface tension and electrical conductivity, and all of which reach the PIR at room temperature far more readily than EMI-BF4.
△ Less
Submitted 21 February, 2024;
originally announced February 2024.
-
Decay of $^{99m}$Tc as part of calibration procedure for $^{192}$Ir activity measurements using a well type ionization chamber
Authors:
Marco A. Ridenti,
Paulo R. Pascholati,
Suzana Botelho,
Josemary A. C. Gonçalves,
Carmen C. Bueno
Abstract:
In this work the linearity in the response of an ionization-chamber as a function of $^{99m}$Tc activity was checked as part of a calibration procedure for $^{192}$Ir activity measurements. The non-linearity was found to be caused mainly by the electrometer range switching. A model based on the hypothesis that the non-linear effect did not influence the decay constant was tested. This method allow…
▽ More
In this work the linearity in the response of an ionization-chamber as a function of $^{99m}$Tc activity was checked as part of a calibration procedure for $^{192}$Ir activity measurements. The non-linearity was found to be caused mainly by the electrometer range switching. A model based on the hypothesis that the non-linear effect did not influence the decay constant was tested. This method allowed to correct the non-linear effect and obtain the 99mTc activity with good acuracy.
△ Less
Submitted 3 August, 2023;
originally announced August 2023.
-
High open-circuit voltage in transition metal dichalcogenide solar cells
Authors:
Simon A. Svatek,
C. Bueno,
Der-Yuh Lin,
James Kerfoot,
Carlos Macías,
Marius H. Zehender,
Ignacio Tobías,
Pablo García-Linares,
Takashi Taniguchi,
Kenji Watanabe,
Peter Beton,
Elisa Antolín
Abstract:
The conversion efficiency of ultra-thin solar cells based on layered materials has been limited by their open-circuit voltage, which is typically pinned to a value under 0.6 V. Here we report an open-circuit voltage of 1.02 V in a 120 nm-thick vertically stacked homojunction fabricated with substitutionally doped MoS2. This high open-circuit voltage is consistent with the band alignment in the MoS…
▽ More
The conversion efficiency of ultra-thin solar cells based on layered materials has been limited by their open-circuit voltage, which is typically pinned to a value under 0.6 V. Here we report an open-circuit voltage of 1.02 V in a 120 nm-thick vertically stacked homojunction fabricated with substitutionally doped MoS2. This high open-circuit voltage is consistent with the band alignment in the MoS2 homojunction, which is more favourable than in widely-used TMDC heterostructures. It is also attributed to the high performance of the substitutionally doped MoS2, in particular the p-type material doped with Nb, which is demonstrated by the observation of electroluminescence from tunnelling graphene/BN/MoS2 structures in spite of the indirect nature of bulk MoS2. We find that illuminating the TMDC/metal contacts decreases the measured open-circuit voltage in MoS2 van der Waals homojunctions because they are photoactive, which points to the need of developing low-resistance, ohmic contacts to doped MoS2 in order to achieve high efficiency in practical devices. The high open-circuit voltage demonstrated here confirms the potential of layered transition-metal dichalcogenides for the development of highly efficient, ultra-thin solar cells.
△ Less
Submitted 29 September, 2020;
originally announced September 2020.
