-
Current-induced deterministic switching of van der Waals ferromagnet at room temperature
Authors:
Shivam N. Kajale,
Thanh Nguyen,
Corson A. Chao,
David C. Bono,
Artittaya Boonkird,
Mingda Li,
Deblina Sarkar
Abstract:
Recent discovery of emergent magnetism in van der Waals magnetic materials (vdWMM) has broadened the material space for developing spintronic devices for energy-efficient computation. While there has been appreciable progress in vdWMM discovery, with strong perpendicular magnetic anisotropy (PMA) and Curie temperatures exceeding room temperature, a solution for non-volatile, deterministic switchin…
▽ More
Recent discovery of emergent magnetism in van der Waals magnetic materials (vdWMM) has broadened the material space for developing spintronic devices for energy-efficient computation. While there has been appreciable progress in vdWMM discovery, with strong perpendicular magnetic anisotropy (PMA) and Curie temperatures exceeding room temperature, a solution for non-volatile, deterministic switching of vdWMMs at room temperature has been missing, limiting the prospects of their adoption into commercial spintronic devices. Here, we report the first demonstration of current-controlled non-volatile, deterministic magnetization switching in a vdW magnetic material at room temperature. We have achieved spin-orbit torque (SOT) switching of the PMA vdW magnet Fe3GaTe2 using a Pt spin-Hall layer up to 320 K, with a threshold switching current density as low as $J_{sw} = 1.69\times10^6 A/cm^2$ at room temperature. We have also quantitatively estimated the anti-damping-like SOT efficiency of our Fe3GaTe2/Pt bilayer system to be $ξ_{DL}$ = 0.093, using second harmonic Hall voltage measurement technique. These results mark a crucial step in making vdW magnetic materials a viable choice for the development of scalable, future spintronic devices.
△ Less
Submitted 25 June, 2023;
originally announced June 2023.
-
Dynamical Systems, Representation of Particle Beams
Authors:
Alex Chao
Abstract:
An overview of dynamical systems in accelerator physics is presented with a suggestion of a few issues to be addressed. Also mentioned are a few possible developments in the future. Technical details supporting the views are not presented.
An overview of dynamical systems in accelerator physics is presented with a suggestion of a few issues to be addressed. Also mentioned are a few possible developments in the future. Technical details supporting the views are not presented.
△ Less
Submitted 25 June, 2020;
originally announced June 2020.
-
Patient Specific Biomechanics Are Clinically Significant In Accurate Computer Aided Surgical Image Guidance
Authors:
Michael Barrow,
Alice Chao,
Qizhi He,
Sonia Ramamoorthy,
Claude Sirlin,
Ryan Kastner
Abstract:
Augmented Reality is used in Image Guided surgery (AR IG) to fuse surgical landmarks from preoperative images into a video overlay. Physical simulation is essential to maintaining accurate position of the landmarks as surgery progresses and ensuring patient safety by avoiding accidental damage to vessels etc. In liver procedures, AR IG simulation accuracy is hampered by an inability to model stiff…
▽ More
Augmented Reality is used in Image Guided surgery (AR IG) to fuse surgical landmarks from preoperative images into a video overlay. Physical simulation is essential to maintaining accurate position of the landmarks as surgery progresses and ensuring patient safety by avoiding accidental damage to vessels etc. In liver procedures, AR IG simulation accuracy is hampered by an inability to model stiffness variations unique to the patients disease. We introduce a novel method to account for patient specific stiffness variation based on Magnetic Resonance Elastography (MRE) data. To the best of our knowledge we are the first to demonstrate the use of in-vivo biomechanical data for AR IG landmark placement. In this early work, a comparative evaluation of our MRE data driven simulation and the traditional method shows clinically significant differences in accuracy during landmark placement and motivates further animal model trials.
△ Less
Submitted 29 January, 2020;
originally announced January 2020.
-
Accelerator Based Fusion Reactor
Authors:
Keh-Fei Liu,
Alexander Wu Chao
Abstract:
A feasibility study of fusion reactors based on accelerators is carried out. We consider a novel scheme where a beam from the accelerator hits the target plasma on the resonance of the fusion reaction and establish characteristic criteria for a workable reactor. We consider the reactions $ d + t \rightarrow n + α, d + {}^3H_e \rightarrow p + α$, and $p + {}^{11}B \rightarrow 3 α$ in this study. Th…
▽ More
A feasibility study of fusion reactors based on accelerators is carried out. We consider a novel scheme where a beam from the accelerator hits the target plasma on the resonance of the fusion reaction and establish characteristic criteria for a workable reactor. We consider the reactions $ d + t \rightarrow n + α, d + {}^3H_e \rightarrow p + α$, and $p + {}^{11}B \rightarrow 3 α$ in this study. The critical temperature of the plasma is determined from overcoming the stopping power of the beam with the fusion energy gain. The needed plasma lifetime is determined from the width of the resonance, the beam velocity and the plasma density. We estimate the critical beam flux by balancing the energy of fusion production against the plasma thermo-energy and the loss due to stopping power for the case of an inert plasma. The product of critical flux and plasma lifetime is independent of plasma density and has a weak dependence on temperature. Even though the critical temperatures for these reactions are lower than those for the thermonuclear reactors, the critical flux is in the range of $10^{22} - 10^{24}/\rm{cm^2/s}$ for the plasma density $ρ_t = 10^{15}/{\rm cm^3}$ in the case of an inert plasma. Several approaches to control the growth of the two-stream instability are discussed. We have also considered several scenarios for practical implementation which will require further studies. Finally, we consider the case where the injected beam at the resonance energy maintains the plasma temperature and prolongs its lifetime to reach a steady state. The equations for power balance and particle number conservation are given for this case.
△ Less
Submitted 10 July, 2017;
originally announced July 2017.
-
A Feasibility Study of an e+e- Ring Collider for Higgs Factory
Authors:
Yunhai Cai,
Alex Chao,
Yuri Nosochkov,
Uli Wienands,
Frank Zimmermann
Abstract:
A ring-based Higgs factory with a center-of-mass energy of 240 GeV residing in the existing LEP tunnel is studied at a level of concrete lattice. We found that low-emittance lattice is essential to mitigate the effect of beamstrahlung on the beam lifetime. To achieve a luminosity of $1.0\times10^{34}{\rm cm}^{-2}{\rm s}^{-1}$, we simplified final focusing system and improved its momentum aperture…
▽ More
A ring-based Higgs factory with a center-of-mass energy of 240 GeV residing in the existing LEP tunnel is studied at a level of concrete lattice. We found that low-emittance lattice is essential to mitigate the effect of beamstrahlung on the beam lifetime. To achieve a luminosity of $1.0\times10^{34}{\rm cm}^{-2}{\rm s}^{-1}$, we simplified final focusing system and improved its momentum aperture by a factor of 5 to 2.5%.
△ Less
Submitted 10 September, 2013;
originally announced September 2013.
-
Report of the ICFA Beam Dynamics Workshop 'Accelerators for a Higgs Factory: Linear vs. Circular' (HF2012)
Authors:
Alain Blondel,
Alex Chao,
Weiren Chou,
Jie Gao,
Daniel Schulte,
Kaoru Yokoya
Abstract:
This paper is a summary report of the ICFA Beam Dynamics Workshop 'Accelerators for a Higgs Factory: Linear vs. Circular' (HF2012). It discusses four types of accelerators as possible candidates for a Higgs factory: linear e+e- colliders, circular e+e- colliders, muon collider and photon colliders. The comparison includes: physics reach, performance (energy and luminosity), upgrade potential, tech…
▽ More
This paper is a summary report of the ICFA Beam Dynamics Workshop 'Accelerators for a Higgs Factory: Linear vs. Circular' (HF2012). It discusses four types of accelerators as possible candidates for a Higgs factory: linear e+e- colliders, circular e+e- colliders, muon collider and photon colliders. The comparison includes: physics reach, performance (energy and luminosity), upgrade potential, technology maturity and readiness, and technical challenges requiring further R&D.
△ Less
Submitted 15 February, 2013; v1 submitted 14 February, 2013;
originally announced February 2013.
-
Status of the Super-B factory Design
Authors:
W. Wittmer,
K. Bertsche,
A. Chao,
A. Novokhatski,
Y. Nosochkov,
J. Seeman,
M. K. Sullivan,
U. Wienands,
S. Weathersby,
A. V. Bogomyagkov,
E. Levichev,
S. Nikitin,
P. Piminov,
D. Shatilov,
S. Sinyatkin,
P. Vobly,
I. N. Okunev,
B. Bolzon,
L. Brunetti,
A. Jeremie,
M. E. Biagini,
R. Boni,
M. Boscolo,
T. Demma,
A. Drago
, et al. (20 additional authors not shown)
Abstract:
The SuperB international team continues to optimize the design of an electron-positron collider, which will allow the enhanced study of the origins of flavor physics. The project combines the best features of a linear collider (high single-collision luminosity) and a storage-ring collider (high repetition rate), bringing together all accelerator physics aspects to make a very high luminosity of 10…
▽ More
The SuperB international team continues to optimize the design of an electron-positron collider, which will allow the enhanced study of the origins of flavor physics. The project combines the best features of a linear collider (high single-collision luminosity) and a storage-ring collider (high repetition rate), bringing together all accelerator physics aspects to make a very high luminosity of 10$^{36}$ cm$^{-2}$ sec$^{-1}$. This asymmetric-energy collider with a polarized electron beam will produce hundreds of millions of B-mesons at the $Υ$(4S) resonance. The present design is based on extremely low emittance beams colliding at a large Piwinski angle to allow very low $β_y^\star$ without the need for ultra short bunches. Use of crab-waist sextupoles will enhance the luminosity, suppressing dangerous resonances and allowing for a higher beam-beam parameter. The project has flexible beam parameters, improved dynamic aperture, and spin-rotators in the Low Energy Ring for longitudinal polarization of the electron beam at the Interaction Point. Optimized for best colliding-beam performance, the facility may also provide high-brightness photon beams for synchrotron radiation applications.
△ Less
Submitted 9 October, 2011;
originally announced October 2011.
-
Wide spin resonance with an rf-bunched proton beam
Authors:
V. S. Morozov,
A. W. Chao,
A. D. Krisch,
M. A. Leonova,
J. Liu,
R. S. Raymond,
D. W. Sivers,
V. K. Wong,
A. M. Kondratenko
Abstract:
We recently used an rf solenoid to study the widths of rf spin resonances with both unbunched and bunched beams of 2.1 GeV_c polarized protons stored in the COSY synchrotron. A map, with unbunched beam at different fixed rf-solenoid frequencies, showed a very shallow possible depolarization dip at the resonance. Next we made frequency sweeps of 400Hz, centered at similar frequencies, which great…
▽ More
We recently used an rf solenoid to study the widths of rf spin resonances with both unbunched and bunched beams of 2.1 GeV_c polarized protons stored in the COSY synchrotron. A map, with unbunched beam at different fixed rf-solenoid frequencies, showed a very shallow possible depolarization dip at the resonance. Next we made frequency sweeps of 400Hz, centered at similar frequencies, which greatly enhanced the dip. But, with a bunched proton beam, both the fixed-frequency and frequency-sweep techniques produced similar maps, and both bunched maps showed full beam depolarization over a wide region. Moreover, both were more than twice as wide as the unbunched dip. This widening of the proton resonance due to bunching is exactly opposite to the recently observed narrowing of deuteron resonances due to bunching.
△ Less
Submitted 9 January, 2010;
originally announced January 2010.
-
Collective deceleration: toward a compact beam dump
Authors:
H. -C. Wu,
T. Tajima,
D. Habs,
A. W. Chao,
J. Meyer-ter-Vehn
Abstract:
With the increasing development of laser accelerators, the electron energy is already beyond GeV and even higher in near future. Conventional beam dump based on ionization or radiation loss mechanism is cumbersome and costly, also has radiological hazards. We revisit the stopping power of high-energy charged particles in matter and discuss the associated problem of beam dump from the point of vi…
▽ More
With the increasing development of laser accelerators, the electron energy is already beyond GeV and even higher in near future. Conventional beam dump based on ionization or radiation loss mechanism is cumbersome and costly, also has radiological hazards. We revisit the stopping power of high-energy charged particles in matter and discuss the associated problem of beam dump from the point of view of collective deceleration. The collective stopping length in an ionized gas can be several orders of magnitude shorter than the Bethe-Bloch and multiple electromagnetic cascades' stopping length in solid. At the mean time, the tenuous density of the gas makes the radioactivation negligible. Such a compact and non-radioactivating beam dump works well for short and dense bunches, which is typically generated from laser wakefield accelerator.
△ Less
Submitted 10 December, 2009; v1 submitted 8 September, 2009;
originally announced September 2009.
-
Diaphragm as an anatomic surrogate for lung tumor motion
Authors:
Laura I. Cervino,
Alvin. K. Y. Chao,
Ajay Sandhu,
Steve B. Jiang
Abstract:
Lung tumor motion due to respiration poses a challenge in the application of modern three-dimensional conformal radiotherapy. Direct tracking of the lung tumor during radiation therapy is very difficult without implanted fiducial markers. Indirect tracking relies on the correlation of the tumor's motion and the surrogate's motion. The present paper presents an analysis of the correlation between…
▽ More
Lung tumor motion due to respiration poses a challenge in the application of modern three-dimensional conformal radiotherapy. Direct tracking of the lung tumor during radiation therapy is very difficult without implanted fiducial markers. Indirect tracking relies on the correlation of the tumor's motion and the surrogate's motion. The present paper presents an analysis of the correlation between the tumor motion and the diaphragm motion in order to evaluate the potential use of diaphragm as a surrogate for tumor motion. We have analyzed the correlation between diaphragm motion and superior-inferior lung tumor motion in 32 fluoroscopic image sequences from 10 lung cancer patients. A simple linear model and a more complex linear model that accounts for phase delays between the two motions have been used. Results show that the diaphragm is a good surrogate for tumor motion prediction for most patients, resulting in an average correlation factor of 0.94 and 0.98 with each model respectively. The model that accounts for delays leads to an average localization prediction error of 0.8mm and an error at the 95% confidence level of 2.1mm. However, for one patient studied, the correlation is much weaker compared to other patients. This indicates that, before using diaphragm for lung tumor prediction, the correlation should be examined on a patient-by-patient basis.
△ Less
Submitted 20 April, 2009;
originally announced April 2009.
-
Spin resonance strengths due to rf solenoids and dipoles for stored deuteron beams
Authors:
M. A. Leonova,
A. W. Chao,
E. D. Courant,
A. D. Krisch,
V. S. Morozov,
R. S. Raymond,
D. W. Sivers,
J. M. Williams,
V. K. Wong,
A. Garishvili,
R. Gebel,
A. Lehrach,
B. Lorentz,
R. Maier,
D. Prasuhn,
H. Stockhorst,
D. Welsch,
F. Hinterberger,
K. Ulbrich,
Ya. S. Derbenev,
A. M. Kondratenko,
Y. F. Orlov,
E. J. Stephenson,
N. P. M. Brantjes,
C. J. G. Onderwater
, et al. (1 additional authors not shown)
Abstract:
This submission was withdrawn because of an unresolved dispute between the authors [arXiv admin 2009-4-13].
This submission was withdrawn because of an unresolved dispute between the authors [arXiv admin 2009-4-13].
△ Less
Submitted 13 April, 2009; v1 submitted 16 January, 2009;
originally announced January 2009.
-
Opportunities for TeV Laser Acceleration
Authors:
M. Kando,
H. Kiriyama,
J. K. Koga,
S. Bulanov,
A. W. Chao,
T. Esirkepov,
R. Hajima,
T. Tajima
Abstract:
A set of ballpark parameters for laser, plasma, and accelerator technologies that define for electron energies reaching as high as TeV are identified. These ballpark parameters are carved out from the fundamental scaling laws that govern laser acceleration, theoretically suggested and experimentally explored over a wide range in the recent years. In the density regime on the order of 10^{16} cm^…
▽ More
A set of ballpark parameters for laser, plasma, and accelerator technologies that define for electron energies reaching as high as TeV are identified. These ballpark parameters are carved out from the fundamental scaling laws that govern laser acceleration, theoretically suggested and experimentally explored over a wide range in the recent years. In the density regime on the order of 10^{16} cm^{-3}, the appropriate laser technology, we find, matches well with that of a highly efficient high fluence LD driven Yb ceramic laser. Further, the collective acceleration technique applies to compactify the beam stoppage stage by adopting the beam-plasma wave deceleration, which contributes to significantly enhance the stopping power and energy recovery capability of the beam. Thus we find the confluence of the needed laser acceleration parameters dictated by these scaling laws and the emerging laser technology. This may herald a new technology in the ultrahigh energy frontier.
△ Less
Submitted 29 April, 2008;
originally announced April 2008.
-
On the production of flat electron bunches for laser wake field acceleration
Authors:
M. Kando,
Y. Fukuda,
H. Kotaki,
J. Koga,
S. V. Bulanov,
T. Tajima,
A. Chao,
R. Pitthan,
K. -P. Schuler,
A. G. Zhidkov,
K. Nemoto
Abstract:
We suggest a novel method for injection of electrons into the acceleration phase of particle accelerators, producing low emittance beams appropriate even for the demanding high energy Linear Collider specifications. In this paper we work out the injection into the acceleration phase of the wake field in a plasma behind a high intensity laser pulse, taking advantage of the laser polarization and…
▽ More
We suggest a novel method for injection of electrons into the acceleration phase of particle accelerators, producing low emittance beams appropriate even for the demanding high energy Linear Collider specifications. In this paper we work out the injection into the acceleration phase of the wake field in a plasma behind a high intensity laser pulse, taking advantage of the laser polarization and focusing. With the aid of catastrophe theory we categorize the injection dynamics. The scheme uses the structurally stable regime of transverse wake wave breaking, when electron trajectory self-intersection leads to the formation of a flat electron bunch. As shown in three-dimensional particle-in-cell simulations of the interaction of a laser pulse in a line-focus with an underdense plasma, the electrons, injected via the transverse wake wave breaking and accelerated by the wake wave, perform betatron oscillations with different amplitudes and frequencies along the two transverse coordinates. The polarization and focusing geometry lead to a way to produce relativistic electron bunches with asymmetric emittance (flat beam). An approach for generating flat laser accelerated ion beams is briefly discussed.
△ Less
Submitted 7 June, 2006;
originally announced June 2006.
-
Synchro-Betatron Stop-Bands due to a Single Crab Cavity
Authors:
Georg H. Hoffstaetter,
Alexander W. Chao
Abstract:
We analyze the stop-band due to crab cavities for horizontal tunes that are either close to integers or close to half integers. The latter case is relevant for today's electron/positron colliders. We compare this stop-band to that created by dispersion in an accelerating cavity and show that a single typical crab cavity creates larger stop-bands than a typical dispersion at an accelerating cavit…
▽ More
We analyze the stop-band due to crab cavities for horizontal tunes that are either close to integers or close to half integers. The latter case is relevant for today's electron/positron colliders. We compare this stop-band to that created by dispersion in an accelerating cavity and show that a single typical crab cavity creates larger stop-bands than a typical dispersion at an accelerating cavity.
We furthermore analyze whether it is beneficial to place the crab cavity at a position where the dispersion and its slope vanish. We find that this choice is worth while if the horizontal tune is close to a half integer, but not if it is close to an integer. Furthermore we find that stop-bands can be avoided when the horizontal tune is located at a favorable side of the integer or the half integer.
While we are here concerned with the installation of a single crab cavity in a storage ring, we show that the stop-bands can be weakened, although not eliminated, significantly when two crab cavities per ring are chosen suitably.
△ Less
Submitted 20 May, 2004;
originally announced May 2004.
-
Nonlinear $δf$ Method for Beam-Beam Simulation
Authors:
Yunhai Cai,
Alexander W. Chao,
Stephan I. Tzenov,
Toshi Tajima
Abstract:
We have developed an efficacious algorithm for simulation of the beam-beam interaction in synchrotron colliders based on the nonlinear $δf$ method, where $δf$ is the much smaller deviation of the beam distribution from the slowly evolving main distribution $f_0$. In the presence of damping and quantum fluctuations of synchrotron radiation it has been shown that the slowly evolving part of the di…
▽ More
We have developed an efficacious algorithm for simulation of the beam-beam interaction in synchrotron colliders based on the nonlinear $δf$ method, where $δf$ is the much smaller deviation of the beam distribution from the slowly evolving main distribution $f_0$. In the presence of damping and quantum fluctuations of synchrotron radiation it has been shown that the slowly evolving part of the distribution function satisfies a Fokker-Planck equation. Its solution has been obtained in terms of a beam envelope function and an amplitude of the distribution, which satisfy a coupled system of ordinary differential equations. A numerical algorithm suited for direct code implementation of the evolving distributions for both $δf$ and $f_0$ has been developed. Explicit expressions for the dynamical weights of macro-particles for $δf$ as well as an expression for the slowly changing $f_0$ have been obtained.
△ Less
Submitted 23 October, 2000;
originally announced October 2000.
-
Simulation of the Beam-Beam Effects in $e^+e^-$ Storage Rings with a Method of Reducing the Region of Mesh
Authors:
Yunhai Cai,
Alex W. Chao,
Stephan I. Tzenov,
Toshi Tajima
Abstract:
A highly accurate self-consistent particle code to simulate the beam-beam collision in $e^+e^-$ storage rings has been developed. It adopts a method of solving the Poisson equation with an open boundary. The method consists of two steps: assigning the potential on a finite boundary using the Green's function, and then solving the potential inside the boundary with a fast Poisson solver. Since th…
▽ More
A highly accurate self-consistent particle code to simulate the beam-beam collision in $e^+e^-$ storage rings has been developed. It adopts a method of solving the Poisson equation with an open boundary. The method consists of two steps: assigning the potential on a finite boundary using the Green's function, and then solving the potential inside the boundary with a fast Poisson solver. Since the solution of the Poisson's equation is unique, our solution is exactly the same as the one obtained by simply using the Green's function. The method allows us to select much smaller region of mesh and therefore increase the resolution of the solver. The better resolution makes more accurate the calculation of the dynamics in the core of the beams. The luminosity simulated with this method agrees quantitatively with the measurement for the PEP-II B-factory ring in the linear and nonlinear beam current regimes, demonstrating its predictive capability in detail.
△ Less
Submitted 30 August, 2000;
originally announced August 2000.
