-
Performances of a new generation tracking detector: the MEG II cylindrical drfit chamber
Authors:
A. M. Baldini,
H. Benmansour,
G. Boca,
G. Cavoto,
F. Cei,
M. Chiappini,
G. Chiarello,
A. Corvaglia,
F. Cuna,
M. Francesconi,
L. Galli,
F. Grancagnolo,
E. G. Grandoni,
M. Grassi,
M. Hildebrandt,
F. Ignatov,
M. Meucci,
W. Molzon,
D. Nicolo',
A. Oya,
D. Palo,
M. Panareo,
A. Papa,
F. Raffaelli,
F. Renga
, et al. (6 additional authors not shown)
Abstract:
The cylindrical drift chamber is the most innovative part of the MEG~II detector, the upgraded version of the MEG experiment. The MEG~II chamber differs from the MEG one because it is a single volume cylindrical structure, instead of a segmented one, chosen to improve its resolutions and efficiency in detecting low energy positrons from muon decays at rest. In this paper, we show the characteristi…
▽ More
The cylindrical drift chamber is the most innovative part of the MEG~II detector, the upgraded version of the MEG experiment. The MEG~II chamber differs from the MEG one because it is a single volume cylindrical structure, instead of a segmented one, chosen to improve its resolutions and efficiency in detecting low energy positrons from muon decays at rest. In this paper, we show the characteristics and performances of this fundamental part of the MEG~II apparatus and we discuss the impact of its higher resolution and efficiency on the sensitivity of the MEG~II experiment. Because of its innovative structure and high quality resolution and efficiency the MEG~II cylindrical drift chamber will be a cornerstone in the development of an ideal tracking detector for future positron-electron collider machines.
△ Less
Submitted 20 May, 2024; v1 submitted 19 October, 2023;
originally announced October 2023.
-
Operation and performance of MEG II detector
Authors:
MEG II Collaboration,
K. Afanaciev,
A. M. Baldini,
S. Ban,
V. Baranov,
H. Benmansour,
M. Biasotti,
G. Boca,
P. W. Cattaneo,
G. Cavoto,
F. Cei,
M. Chiappini,
G. Chiarello,
A. Corvaglia,
F. Cuna,
G. Dal Maso,
A. De Bari,
M. De Gerone,
L. Ferrari Barusso,
M. Francesconi,
L. Galli,
G. Gallucci,
F. Gatti,
L. Gerritzen,
F. Grancagnolo
, et al. (60 additional authors not shown)
Abstract:
The MEG II experiment, located at the Paul Scherrer Institut (PSI) in Switzerland, is the successor to the MEG experiment, which completed data taking in 2013. MEG II started fully operational data taking in 2021, with the goal of improving the sensitivity of the mu+ -> e+ gamma decay down to 6e-14 almost an order of magnitude better than the current limit. In this paper, we describe the operation…
▽ More
The MEG II experiment, located at the Paul Scherrer Institut (PSI) in Switzerland, is the successor to the MEG experiment, which completed data taking in 2013. MEG II started fully operational data taking in 2021, with the goal of improving the sensitivity of the mu+ -> e+ gamma decay down to 6e-14 almost an order of magnitude better than the current limit. In this paper, we describe the operation and performance of the experiment and give a new estimate of its sensitivity versus data acquisition time.
△ Less
Submitted 8 January, 2024; v1 submitted 18 October, 2023;
originally announced October 2023.
-
The Tracking performance for the IDEA drift chamber
Authors:
Walaa Elmetenawee,
gianluigi chiarello,
Alessandro Corvaglia,
Federica Cuna,
Nicola De Filippis,
Edoardo Gorini,
Francesco Grancagnolo,
Marcello Maggi,
Alessandro Miccoli,
Marco Panareo,
Margherita Primavera,
Giovanni Francesco Tassielli,
Andrea Ventura
Abstract:
The IDEA detector concept for a future e$^{+}$e$^{-}$ collider adopts an ultra-low mass drift chamber as a central tracking system. The He-based ultra-low mass drift chamber is designed to provide efficient tracking, a high-precision momentum measurement, and excellent particle identification by exploiting the cluster counting technique. This paper describes the expected tracking performance, obta…
▽ More
The IDEA detector concept for a future e$^{+}$e$^{-}$ collider adopts an ultra-low mass drift chamber as a central tracking system. The He-based ultra-low mass drift chamber is designed to provide efficient tracking, a high-precision momentum measurement, and excellent particle identification by exploiting the cluster counting technique. This paper describes the expected tracking performance, obtained with full and fast simulation, for track reconstruction on detailed simulated physics events. Moreover, the details of the construction parameters of the drift chamber, including the inspection of new material for the wires, new techniques for soldering the wires, the development of an improved schema for the drift cell, and the choice of a gas mixture, will be described.
△ Less
Submitted 22 November, 2022;
originally announced November 2022.
-
Particle identification with the cluster counting technique for the IDEA drift chamber
Authors:
Claudio Caputo,
Gianluigi Chiarello,
Alessandro Corvaglia,
Federica Cuna,
Brunella D'Anzi,
Nicola De Filippis,
Walaa Elmetenawee,
Edoardo Gorini,
Francesco Grancagnolo,
Matteo Greco,
Sergei Gribanov,
Kurtis Johnson,
Alessandro Miccoli,
Marco Panareo,
Alexander Popov,
Margherita Primavera,
Angela Taliercio,
Giovanni Francesco Tassielli,
Andrea Ventura,
Shuiting Xin
Abstract:
IDEA (Innovative Detector for an Electron-positron Accelerator) is a general-purpose detector concept, designed to study electron-positron collisions in a wide energy range from a very large circular leptonic collider. Its drift chamber is designed to provide an efficient tracking, a high precision momentum measurement and an excellent particle identification by exploiting the application of the c…
▽ More
IDEA (Innovative Detector for an Electron-positron Accelerator) is a general-purpose detector concept, designed to study electron-positron collisions in a wide energy range from a very large circular leptonic collider. Its drift chamber is designed to provide an efficient tracking, a high precision momentum measurement and an excellent particle identification by exploiting the application of the cluster counting technique. To investigate the potential of the cluster counting techniques on physics events, a simulation of the ionization clusters generation is needed, therefore we developed an algorithm which can use the energy deposit information provided by Geant4 toolkit to reproduce, in a fast and convenient way, the clusters number distribution and the cluster size distribution. The results obtained confirm that the cluster counting technique allows to reach a resolution 2 times better than the traditional dE/dx method. A beam test has been performed during November 2021 at CERN on the H8 to validate the simulations results, to define the limiting effects for a fully efficient cluster counting and to count the number of electron clusters released by an ionizing track at a fixed $βγ$ as a function of the track angle. The simulation and the beam test results will be described briefly in this issue.
△ Less
Submitted 23 December, 2022; v1 submitted 8 November, 2022;
originally announced November 2022.
-
The measuring systems of the wire tension for the MEG II Drift Chamber by means of the resonant frequency technique
Authors:
A. M. Baldini,
H. Benmansour,
G. Cavoto,
F. Cei,
M. Chiappini,
G. Chiarello,
C. Chiri,
G. Cocciolo,
A. Corvaglia,
F. Cuna,
M. Francesconi,
L. Galli,
F. Grancagnolo,
M. Grassi,
M. Meucci,
A. Miccoli,
D. Nicolo',
M. Panareo,
A. Papa,
C. Pinto,
F. Raffaelli,
F. Renga,
G. Signorelli,
G. F. Tassielli,
A. Venturini
, et al. (2 additional authors not shown)
Abstract:
The ultra-low mass cylindrical drift chamber designed for the MEG II experiment is a challenging apparatus made of 1728 phi = 20 micron gold plated tungsten sense wires, 7680 phi = 40 micron and 2496 phi = 50 micron silver plated aluminum field wires. Because of electrostatic stability requirements all the wires have to be stretched at mechanical tensions of about 25, 19 and 29 g respectively whic…
▽ More
The ultra-low mass cylindrical drift chamber designed for the MEG II experiment is a challenging apparatus made of 1728 phi = 20 micron gold plated tungsten sense wires, 7680 phi = 40 micron and 2496 phi = 50 micron silver plated aluminum field wires. Because of electrostatic stability requirements all the wires have to be stretched at mechanical tensions of about 25, 19 and 29 g respectively which must be controlled at a level better than 0.5 g. This chamber is presently in acquisition, but during its construction about 100 field wires broke, because of chemical corrosion induced by the atmospheric humidity. On the basis of the experience gained with this chamber we decided to build a new one, equipped with a different type of wires less sensitive to corrosion. The choice of the new wire required a deep inspection of its characteristics and one of the main tools for doing this is a system for measuring the wire tension by means of the resonant frequency technique, which is described in this paper. The system forces the wires to oscillate by applying a sinusoidal signal at a known frequency, and then measures the variation of the capacitance between a wire and a common ground plane as a function of the external signal frequency. We present the details of the measuring system and the results obtained by scanning the mechanical tensions of two samples of MEG II cylindrical drift chamber wires and discuss the possible improvements of the experimental apparatus and of the measuring technique.
△ Less
Submitted 26 October, 2022; v1 submitted 22 July, 2022;
originally announced July 2022.
-
Detailed analysis of chemical corrosion of ultra-thin wires used in drift chamber detectors
Authors:
A. M. Baldini,
G. Cavoto,
F. Cei,
M. Chiappini,
G. Chiarello,
C. Chiri,
G. Cocciolo,
A. Corvaglia,
F. Cuna,
M. Francesconi,
L. Galli,
F. Grancagnolo,
M. Grassi,
R. Ishak,
M. Meucci,
D. Nicoló,
M. Panareo,
A. Papa,
A. Pepino,
F. Raffaelli,
F. Renga,
E. Ripiccini,
G. Signorelli,
G. F. Tassielli,
R. Valentini
, et al. (2 additional authors not shown)
Abstract:
Ultra-thin metallic anodic and cathodic wires are frequently employed in low-mass gaseous detectors for precision experiments, where the amount of material crossed by charged particles must be minimised. We present here the results of an analysis of the mechanical stress and chemical corrosion effects observed in $40$ and $50~{\rm{μm}}$ diameter silver plated aluminum wires mounted within the volu…
▽ More
Ultra-thin metallic anodic and cathodic wires are frequently employed in low-mass gaseous detectors for precision experiments, where the amount of material crossed by charged particles must be minimised. We present here the results of an analysis of the mechanical stress and chemical corrosion effects observed in $40$ and $50~{\rm{μm}}$ diameter silver plated aluminum wires mounted within the volume of the MEG\,II drift chamber, which caused the breaking of about one hundred wires (over a total of $\approx 12000$). This analysis is based on the accurate inspection of the broken wires by means of optical and electronic microscopes and on a detailed recording of all breaking accidents. We present a simple empirical model which relates the number of broken wires to their exposure time to atmospheric humidity and to their mechanical tension, which is necessary for mechanical stability in the presence of electrostatic fields of several kV/cm. Finally we discuss how wire breakings can be avoided or at least strongly reduced by operating in controlled atmosphere during the mounting stages of the wires within the drift chamber and by choosing a $25\,\%$ thicker wire diameter, which has very small effects on the detector resolution and efficiency and can be obtained by using a safer fabrication technique.
△ Less
Submitted 22 November, 2021; v1 submitted 31 August, 2021;
originally announced August 2021.
-
The Search for $μ^+\to e^+ γ$ with 10$^{-14}$ Sensitivity: the Upgrade of the MEG Experiment
Authors:
The MEG II Collaboration,
Alessandro M. Baldini,
Vladimir Baranov,
Michele Biasotti,
Gianluigi Boca,
Paolo W. Cattaneo,
Gianluca Cavoto,
Fabrizio Cei,
Marco Chiappini,
Gianluigi Chiarello,
Alessandro Corvaglia,
Federica Cuna,
Giovanni dal Maso,
Antonio de Bari,
Matteo De Gerone,
Marco Francesconi,
Luca Galli,
Giovanni Gallucci,
Flavio Gatti,
Francesco Grancagnolo,
Marco Grassi,
Dmitry N. Grigoriev,
Malte Hildebrandt,
Kei Ieki,
Fedor Ignatov
, et al. (45 additional authors not shown)
Abstract:
The MEG experiment took data at the Paul Scherrer Institute in the years 2009--2013 to test the violation of the lepton flavour conservation law, which originates from an accidental symmetry that the Standard Model of elementary particle physics has, and published the most stringent limit on the charged lepton flavour violating decay $μ^+ \rightarrow {\rm e}^+ γ$: BR($μ^+ \rightarrow {\rm e}^+ γ$)…
▽ More
The MEG experiment took data at the Paul Scherrer Institute in the years 2009--2013 to test the violation of the lepton flavour conservation law, which originates from an accidental symmetry that the Standard Model of elementary particle physics has, and published the most stringent limit on the charged lepton flavour violating decay $μ^+ \rightarrow {\rm e}^+ γ$: BR($μ^+ \rightarrow {\rm e}^+ γ$) $<4.2 \times 10^{-13}$ at 90% confidence level. The MEG detector has been upgraded in order to reach a sensitivity of $6\times10^{-14}$. The basic principle of MEG II is to achieve the highest possible sensitivity using the full muon beam intensity at the Paul Scherrer Institute ($7\times10^{7}$ muons/s) with an upgraded detector. The main improvements are better rate capability of all sub-detectors and improved resolutions while keeping the same detector concept. In this paper, we present the current status of the preparation, integration and commissioning of the MEG II detector in the recent engineering runs.
△ Less
Submitted 1 September, 2021; v1 submitted 22 July, 2021;
originally announced July 2021.
-
Simulation of particle identification with the cluster counting technique
Authors:
Federica Cuna,
Nicola De Filippis,
Francesco Grancagnolo,
Giovanni Francesco Tassielli
Abstract:
In this paper we show the potential of the cluster counting technique for particle identification. Simulations based on Garfield++ software prove that this technique improves the particle separation capabilities with respect to the ones obtained with the traditional method of dE/dx. Moreover three different algorithms to reproduce the clusters number and the cluster size distribution with Geant4 s…
▽ More
In this paper we show the potential of the cluster counting technique for particle identification. Simulations based on Garfield++ software prove that this technique improves the particle separation capabilities with respect to the ones obtained with the traditional method of dE/dx. Moreover three different algorithms to reproduce the clusters number and the cluster size distribution with Geant4 software are discussed.
△ Less
Submitted 14 May, 2021;
originally announced May 2021.
-
A 10-3 drift velocity monitoring chamber
Authors:
F. Cuna,
G. Chiarello,
A. Corvaglia,
N. De Filippis,
F. Grancagnolo,
M. Manta,
I. Margjeka,
A. Miccoli,
M. Panareo,
G. F. Tassielli
Abstract:
The MEG-II experiment searches for the lepton flavor violating decay: mu in electron and gamma. The reconstruction of the positron trajectory uses a cylindrical drift chamber operated with a mixture of He and iC4H10 gas. It is important to provide a stable performance of the detector in terms of its electron transport parameters, avalanche multiplication, composition and purity of the gas mixture.…
▽ More
The MEG-II experiment searches for the lepton flavor violating decay: mu in electron and gamma. The reconstruction of the positron trajectory uses a cylindrical drift chamber operated with a mixture of He and iC4H10 gas. It is important to provide a stable performance of the detector in terms of its electron transport parameters, avalanche multiplication, composition and purity of the gas mixture. In order to have a continuous monitoring of the quality of gas, we plan to install a small drift chamber, with a simple geometry that allows to measure very precisely the electron drift velocity in a prompt way. This monitoring chamber will be supplied with gas coming from the inlet and the outlet of the detector to determine if gas contaminations originate inside the main chamber or in the gas supply system. The chamber is a small box with cathode walls, that define a highly uniform electric field inside two adjacent drift cells. Along the axis separating the two drift cells, four staggered sense wires alternated with five guard wires collect the drifting electrons. The trigger is provided by two 90Sr weak calibration radioactive sources placed on top of a two thin scintillator tiles telescope. The whole system is designed to give a prompt response (within a minute) about drift velocity variations at the 0.001 level.
△ Less
Submitted 9 June, 2020;
originally announced June 2020.