-
8x8 Patch-Antenna-Coupled TeraFET Detector Array for Terahertz Quantum-Cascade-Laser Applications
Authors:
Jakob Holstein,
Nicholas K. North,
Michael D. Horbury,
Sanchit Kondawar,
Imon Kundu,
Mohammed Salih,
Anastasiya Krysl,
Lianhe Li,
Edmund H. Linfield,
Joshua R. Freeman,
Alexander Valavanis,
Alvydas Lisauskas,
Hartmut G. Roskos
Abstract:
Monolithically integrated, antenna-coupled field-effect transistors (TeraFETs) are rapid and sensitive detectors for the terahertz range (0.3-10~THz) that can operate at room temperature. We conducted experimental characterizations of a single patch-antenna coupled TeraFET optimized for 3.4~THz operation and its integration into an 8x8 multi-element detector configuration. In this configuration, t…
▽ More
Monolithically integrated, antenna-coupled field-effect transistors (TeraFETs) are rapid and sensitive detectors for the terahertz range (0.3-10~THz) that can operate at room temperature. We conducted experimental characterizations of a single patch-antenna coupled TeraFET optimized for 3.4~THz operation and its integration into an 8x8 multi-element detector configuration. In this configuration, the entire TeraFET array operates as a unified detector element, combining the output signals of all detector elements. Both detectors were realized using a mature commercial Si-CMOS 65-nm process node. Our experimental characterization employed single-mode Quantum-Cascade Lasers (QCLs) emitting at 2.85~THz and 3.4~THz. The 8x8 multi-element detector yields two major improvements for sensitive power detection experiments. First, the larger detector area simplifies alignment and enhances signal stability. Second, the reduced detector impedance enabled the implementation of a TeraFET+QCL system capable of providing a -3~dB modulation bandwidth up to 21~MHz, which is currently limited primarily by the chosen readout circuitry. Finally, we validate the system's performance by providing high resolution gas spectroscopy data for methanol vapor around 3.4~THz, where a detection limit of 1.6e-5 absorbance, or 2.6e11~molecules/cm^3 was estimated under optimal coupling conditions.
△ Less
Submitted 5 August, 2024; v1 submitted 10 April, 2024;
originally announced April 2024.
-
Einstein-de Haas torque as a discrete spectroscopic probe allows nanomechanical measurement of a magnetic resonance
Authors:
K. R. Fast,
J. E. Losby,
G. Hajisalem,
P. E. Barclay,
M. R. Freeman
Abstract:
The Einstein-de Haas (EdH) effect is a fundamental, mechanical consequence of any temporal change of magnetism in an object. EdH torque results from conserving the object's total angular momentum: the angular momenta of all the specimen's magnetic moments, together with its mechanical angular momentum. Although the EdH effect is usually small and difficult to observe, it increases in magnitude wit…
▽ More
The Einstein-de Haas (EdH) effect is a fundamental, mechanical consequence of any temporal change of magnetism in an object. EdH torque results from conserving the object's total angular momentum: the angular momenta of all the specimen's magnetic moments, together with its mechanical angular momentum. Although the EdH effect is usually small and difficult to observe, it increases in magnitude with detection frequency. We explore the frequency-dependence of EdH torque for a thin film permalloy microstructure by employing a ladder of flexural beam modes (with five distinct resonance frequencies spanning from 3 to 208 MHz) within a nanocavity optomechanical torque sensor via magnetic hysteresis curves measured at mechanical resonances. At low DC fields the gyrotropic resonance of a magnetic vortex spin texture overlaps the 208 MHz mechanical mode. The massive EdH mechanical torques arising from this co-resonance yield a fingerprint of vortex core pinning and depinning in the sample. The experimental results are discussed in relation to mechanical torques predicted from both macrospin (at high DC magnetic field) and finite-difference solutions to the Landau-Lifshitz-Gilbert (LLG) equation. A global fit of the LLG solutions to the frequency-dependent data reveals a statistically significant discrepancy between the experimentally observed and simulated torque phase behaviours at spin texture transitions that can be reduced through the addition of a time constant to the conversion between magnetic cross-product torque and mechanical torque, constrained by experiment to be in the range of 0.5 - 4 ns.
△ Less
Submitted 19 January, 2024; v1 submitted 27 October, 2023;
originally announced October 2023.
-
Momentum analysis of complex time-periodic flows
Authors:
Benjamin R. S. Freeman,
Robert J. Martinuzzi,
Arman Hemmati
Abstract:
Several methods have been proposed to characterize the complex interactions in turbulent wakes, especially for flows with strong cyclic dynamics. This paper introduces the concept of Fourier-Averaged Navier-Stokes (FANS) equations as a framework to obtain direct insights into the dynamics of complex coherent wake interactions. The method simplifies the interpretations of flow physics by identifyin…
▽ More
Several methods have been proposed to characterize the complex interactions in turbulent wakes, especially for flows with strong cyclic dynamics. This paper introduces the concept of Fourier-Averaged Navier-Stokes (FANS) equations as a framework to obtain direct insights into the dynamics of complex coherent wake interactions. The method simplifies the interpretations of flow physics by identifying terms contributing to momentum transport at different timescales. The method also allows for direct interpretation of non-linear interactions of the terms in the Navier-Stokes equations. By analysing well-known cases, the characteristics of FANS are evaluated. Particularly, we focus on physical interpretation of the terms as they relate to the interactions between modes at different timescales. Through comparison with established physics and other methods, FANS is shown to provide insight into the transfer of momentum between modes by extracting information about the contributing pressure, convective, and diffusive forces. FANS provides a simply calculated and easily interpreted set of equations to analyse flow physics by leveraging momentum conservation principles and Fourier analysis. The method is applicable to flows with complex cyclic waveforms, including broadband spectral energy distributions.
△ Less
Submitted 15 February, 2023;
originally announced February 2023.
-
Laser Driven Nuclear physics at ELINP
Authors:
F. Negoita,
M. Roth,
P. G. Thirolf,
S. Tudisco,
F. Hannachi,
S. Moustaizis,
I. Pomerantz,
P. Mckenna,
J. Fuchs,
K. Sphor,
G. Acbas,
A. Anzalone,
P. Audebert,
S. Balascuta,
F. Cappuzzello,
M. O. Cernaianu,
S. Chen,
I. Dancus,
R. Freeman,
H. Geissel,
P. Ghenuche,
L. Gizzi,
F. Gobet,
G. Gosselin,
M. Gugiu
, et al. (31 additional authors not shown)
Abstract:
High power lasers have proven being capable to produce high energy gamma rays, charged particles and neutrons to induce all kinds of nuclear reactions. At ELI, the studies with high power lasers will enter for the first time into new domains of power and intensities.
High power lasers have proven being capable to produce high energy gamma rays, charged particles and neutrons to induce all kinds of nuclear reactions. At ELI, the studies with high power lasers will enter for the first time into new domains of power and intensities.
△ Less
Submitted 4 January, 2022;
originally announced January 2022.
-
Precise determination of low energy electronuclear Hamiltonian for LiY$_{1-x}$Ho$_{x}$F$_{4}$
Authors:
A. Beckert,
R. I. Hermans,
M. Grimm,
J. R. Freeman,
E. H. Linfield,
A. G. Davies,
M. Müller,
H. Sigg,
S. Gerber,
G. Matmon,
G. Aeppli
Abstract:
We use complementary optical spectroscopy methods to directly measure the lowest crystal-field energies of the rare-earth quantum magnet LiY$_{1-x}$Ho$_{x}$F$_{4}$, including their hyperfine splittings, with more than 10 times higher resolution than previous work. We are able to observe energy level splittings due to the $^6\mathrm{Li}$ and $^7\mathrm{Li}$ isotopes, as well as non-equidistantly sp…
▽ More
We use complementary optical spectroscopy methods to directly measure the lowest crystal-field energies of the rare-earth quantum magnet LiY$_{1-x}$Ho$_{x}$F$_{4}$, including their hyperfine splittings, with more than 10 times higher resolution than previous work. We are able to observe energy level splittings due to the $^6\mathrm{Li}$ and $^7\mathrm{Li}$ isotopes, as well as non-equidistantly spaced hyperfine transitions originating from dipolar and quadrupolar hyperfine interactions. We provide refined crystal field parameters and extract the dipolar and quadrupolar hyperfine constants ${A_J=0.02703\pm0.00003}$ $\textrm{cm}^{-1}$ and ${B= 0.04 \pm0.01}$ $\textrm{cm}^{-1}$, respectively. Thereupon we determine all crystal-field energy levels and magnetic moments of the $^5I_8$ ground state manifold, including the (non-linear) hyperfine corrections. The latter match the measurement-based estimates. The scale of the non-linear hyperfine corrections sets an upper bound for the inhomogeneous line widths that would still allow for unique addressing of a selected hyperfine transition. e.g. for quantum information applications. Additionally, we establish the far-infrared, low-temperature refractive index of LiY$_{1-x}$Ho$_{x}$F$_{4}$.
△ Less
Submitted 16 December, 2020;
originally announced December 2020.
-
Anti-reflection coating design for metallic terahertz meta-materials
Authors:
M. Pancaldi,
R. Freeman,
M. Hudl,
M. C. Hoffmann,
S. Urazhdin,
P. Vavassori,
S. Bonetti
Abstract:
We demonstrate a silicon-based, single-layer anti-reflection coating that suppresses the reflectivity of metals at near-infrared frequencies, enabling optical probing of nano-scale structures embedded in highly reflective surroundings. Our design does not affect the interaction of terahertz radiation with metallic structures that can be used to achieve terahertz near-field enhancement. We have ver…
▽ More
We demonstrate a silicon-based, single-layer anti-reflection coating that suppresses the reflectivity of metals at near-infrared frequencies, enabling optical probing of nano-scale structures embedded in highly reflective surroundings. Our design does not affect the interaction of terahertz radiation with metallic structures that can be used to achieve terahertz near-field enhancement. We have verified the functionality of the design by calculating and measuring the reflectivity of both infrared and terahertz radiation from a silicon/gold double layer as a function of the silicon thickness. We have also fabricated the unit cell of a terahertz meta-material, a dipole antenna comprising two 20-nm thick extended gold plates separated by a 2 $μ$m gap, where the terahertz field is locally enhanced. We used the time-domain finite element method to demonstrate that such near-field enhancement is preserved in the presence of the anti-reflection coating. Finally, we performed magneto-optical Kerr effect measurements on a single 3-nm thick, 1-$μ$m wide magnetic wire placed in the gap of such a dipole antenna. The wire only occupies 2\% of the area probed by the laser beam, but its magneto-optical response can be clearly detected. Our design paves the way for ultrafast time-resolved studies, using table-top femtosecond near-infrared lasers, of dynamics in nano-structures driven by strong terahertz radiation.
△ Less
Submitted 22 December, 2017; v1 submitted 15 November, 2017;
originally announced November 2017.
-
Magnetic Actuation and Feedback Cooling of a Cavity Optomechanical Torque Sensor
Authors:
P. H. Kim,
B. D. Hauer,
T. J. Clark,
F. Fani Sani,
M. R. Freeman,
J. P. Davis
Abstract:
We demonstrate the integration of a mesoscopic ferromagnetic needle with a cavity optomechanical torsional resonator, and its use for quantitative determination of the needle's magnetic properties, as well as amplification and cooling of the resonator motion. With this system we measure torques as small as 32 zNm, corresponding to sensing an external magnetic field of 0.12 A/m (150 nT). Furthermor…
▽ More
We demonstrate the integration of a mesoscopic ferromagnetic needle with a cavity optomechanical torsional resonator, and its use for quantitative determination of the needle's magnetic properties, as well as amplification and cooling of the resonator motion. With this system we measure torques as small as 32 zNm, corresponding to sensing an external magnetic field of 0.12 A/m (150 nT). Furthermore, we are able to extract the magnetization (1710 kA/m) of the magnetic sample, not known a priori, demonstrating this system's potential for studies of nanomagnetism. Finally, we show that we can magnetically drive the torsional resonator into regenerative oscillations, and dampen its mechanical mode temperature from room temperature to 11.6 K, without sacrificing torque sensitivity.
△ Less
Submitted 29 July, 2017;
originally announced July 2017.
-
Highly curved image sensors: a practical approach for improved optical performance
Authors:
Brian Guenter,
Neel Joshi,
Richard Stoakley,
Andrew Keefe,
Kevin Geary,
Ryan Freeman,
Jake Hundley,
Pamela Patterson,
David Hammon,
Guillermo Herrera,
Elena Sherman,
Andrew Nowak,
Randall Schubert,
Peter Brewer,
Louis Yang,
Russell Mott,
Geoff McKnight
Abstract:
The significant optical and size benefits of using a curved focal surface for imaging systems have been well studied yet never brought to market for lack of a high-quality, mass-producible, curved image sensor. In this work we demonstrate that commercial silicon CMOS image sensors can be thinned and formed into accurate, highly curved optical surfaces with undiminished functionality. Our key devel…
▽ More
The significant optical and size benefits of using a curved focal surface for imaging systems have been well studied yet never brought to market for lack of a high-quality, mass-producible, curved image sensor. In this work we demonstrate that commercial silicon CMOS image sensors can be thinned and formed into accurate, highly curved optical surfaces with undiminished functionality. Our key development is a pneumatic forming process that avoids rigid mechanical constraints and suppresses wrinkling instabilities. A combination of forming-mold design, pressure membrane elastic properties, and controlled friction forces enables us to gradually contact the die at the corners and smoothly press the sensor into a spherical shape. Allowing the die to slide into the concave target shape enables a threefold increase in the spherical curvature over prior approaches having mechanical constraints that resist deformation, and create a high-stress, stretch-dominated state. Our process creates a bridge between the high precision and low-cost but planar CMOS process, and ideal non-planar component shapes such as spherical imagers for improved optical systems. We demonstrate these curved sensors in prototype cameras with custom lenses, measuring exceptional resolution of 3220 line-widths per picture height at an aperture of f/1.2 and nearly 100% relative illumination across the field. Though we use a 1/2.3" format image sensor in this report, we also show this process is generally compatible with many state of the art imaging sensor formats. By example, we report photogrammetry test data for an APS-C sized silicon die formed to a 30$^\circ$ subtended spherical angle. These gains in sharpness and relative illumination enable a new generation of ultra-high performance, manufacturable, digital imaging systems for scientific, industrial, and artistic use.
△ Less
Submitted 20 June, 2017;
originally announced June 2017.
-
Nanocavity optomechanical torque magnetometry and radiofrequency susceptometry
Authors:
Marcelo Wu,
Nathanael L. -Y. Wu,
Tayyaba Firdous,
Fatemeh Fani Sani,
Joseph E. Losby,
Mark R. Freeman,
Paul E. Barclay
Abstract:
Nanophotonic optomechanical devices allow observation of nanoscale vibrations with sensitivity that has dramatically advanced metrology of nanomechanical structures [1-9] and has the potential to impact studies of nanoscale physical systems in a similar manner [10, 11]. Here we demonstrate this potential with a nanophotonic optomechanical torque magnetometer and radiofrequency (RF) magnetic suscep…
▽ More
Nanophotonic optomechanical devices allow observation of nanoscale vibrations with sensitivity that has dramatically advanced metrology of nanomechanical structures [1-9] and has the potential to impact studies of nanoscale physical systems in a similar manner [10, 11]. Here we demonstrate this potential with a nanophotonic optomechanical torque magnetometer and radiofrequency (RF) magnetic susceptometer. Exquisite readout sensitivity provided by a nanocavity integrated within a torsional nanomechanical resonator enables observations of the unique net magnetization and RF-driven responses of single mesoscopic magnetic structures in ambient conditions. The magnetic moment resolution is sufficient for observation of Barkhausen steps in the magnetic hysteresis of a lithographically patterned permalloy island [12]. In addition, significantly enhanced RF susceptibility is found over narrow field ranges and attributed to thermally assisted driven hopping of a magnetic vortex core between neighboring pinning sites [13]. The on-chip magneto-susceptometer scheme offers a promising path to powerful integrated cavity optomechanical devices for quantitative characterization of magnetic micro- and nanosystems in science and technology.
△ Less
Submitted 2 November, 2016; v1 submitted 10 May, 2016;
originally announced May 2016.
-
Towards manipulating relativistic laser pulses with 3D printed materials
Authors:
L. L. Ji,
J. Snyder,
A. Pukhov,
R. R. Freeman,
K. U. Akli
Abstract:
Efficient coupling of intense laser pulses to solid-density matter is critical to many applications including ion acceleration for cancer therapy. At relativistic intensities, the focus has been mainly on investigating various laser beams irradiating initially flat interfaces with little or no control over the interaction. Here, we propose a novel approach that leverages recent advancements in 3D…
▽ More
Efficient coupling of intense laser pulses to solid-density matter is critical to many applications including ion acceleration for cancer therapy. At relativistic intensities, the focus has been mainly on investigating various laser beams irradiating initially flat interfaces with little or no control over the interaction. Here, we propose a novel approach that leverages recent advancements in 3D direct laser writing (DLW) of materials and high contrast lasers to manipulate the laser-matter interactions on the micro-scales. We demonstrate, via simulations, that usable intensities >10^23Wcm^(-2) could be achieved with current tabletop lasers coupled to 3D printed plasma lenses. We show that these plasma optical elements act not only as a lens to focus laser light, but also as an electromagnetic guide for secondary particle beams. These results open new paths to engineering light-matter interactions at ultra-relativistic intensities.
△ Less
Submitted 23 September, 2015;
originally announced September 2015.
-
Microengineering laser plasma interactions at relativistic intensities
Authors:
S. Jiang,
L. L. Ji,
H. Audesirk,
K. M. George,
J. Snyder,
A. Krygier,
N. S. Lewis,
D. W. Schumacher,
A. Pukhov,
R. R. Freeman,
K. U. Akli
Abstract:
We report on the first successful proof-of-principle experiment to manipulate laser-matter interactions on the microscale using highly ordered Si microwire arrays. The interaction of a high contrast short pulse laser with a flat target via periodic Si microwires yields a substantial enhancement in both total and cut-off energies of the produced electron beam. The self generated electric and magnet…
▽ More
We report on the first successful proof-of-principle experiment to manipulate laser-matter interactions on the microscale using highly ordered Si microwire arrays. The interaction of a high contrast short pulse laser with a flat target via periodic Si microwires yields a substantial enhancement in both total and cut-off energies of the produced electron beam. The self generated electric and magnetic fields behave as an electromagnetic lens that confines and guides electrons between the microwires as they acquire relativistic energies via direct laser acceleration (DLA).
△ Less
Submitted 16 September, 2015;
originally announced September 2015.
-
Relativistic electron acceleration by mJ-class kHz lasers normally incident on liquid targets
Authors:
Scott Feister,
Drake R. Austin,
John T. Morrison,
Kyle D. Frische,
Chris Orban,
Gregory Ngirmang,
Abraham Handler,
Joseph R. H. Smith,
Mark Schillaci,
Jay A. LaVerne,
Enam A. Chowdhury,
R. R. Freeman,
W. M. Roquemore
Abstract:
We report observation of kHz-pulsed-laser-accelerated electron energies up to 3 MeV in the -$k_\text{laser}$ (backward) direction from a 3 mJ laser interacting at normal incidence with a solid density, flowing-liquid target. The electrons/MeV/s.r. >1 MeV recorded here using a mJ-class laser exceeds or equals that of prior super-ponderomotive electron studies employing lasers at lower repetition-ra…
▽ More
We report observation of kHz-pulsed-laser-accelerated electron energies up to 3 MeV in the -$k_\text{laser}$ (backward) direction from a 3 mJ laser interacting at normal incidence with a solid density, flowing-liquid target. The electrons/MeV/s.r. >1 MeV recorded here using a mJ-class laser exceeds or equals that of prior super-ponderomotive electron studies employing lasers at lower repetition-rates and oblique incidence. Focal intensity of the 40-fs-duration laser is 1.5 $\cdot$ 10$^{18}$ W cm$^{-2}$, corresponding to only ~80 keV electron ponderomotive energy. Varying laser intensity confirms electron energies in the laser-reflection direction well above what might be expected from ponderomotive scaling in normal-incidence laser-target geometry. This direct, normal-incidence energy spectrum measurement is made possible by modifying the final focusing off-axis-paraboloid (OAP) mirror with a central hole that allows electrons to pass, and restoring laser intensity through adaptive optics. A Lanex-based, optics-free high-acquisition rate (>100 Hz) magnetic electron-spectrometer was developed for this study to enable shot-to-shot statistical analysis and real-time feedback, which was leveraged in finding optimal pre-plasma conditions. 3D Particle-in-cell simulations of the interaction show qualitative super-ponderomotive spectral agreement with experiment. The demonstration of a high-repetition-rate, high-flux source containing >MeV electrons from a few-mJ, 40 fs laser and a simple liquid target encourages development of future $\geq$kHz-repetition, fs-duration electron-beam applications.
△ Less
Submitted 20 July, 2017; v1 submitted 28 August, 2015;
originally announced August 2015.
-
Calibration of Time Of Flight Detectors Using Laser-driven Neutron Source
Authors:
S. R. Mirfayzi,
S. Kar,
H. Ahmed,
A. G. Krygier,
A. Green,
A. Alejo,
R. Clarke,
R. R. Freeman,
J. Fuchs,
D. Jung,
A. Kleinschmidt,
J. T. Morrison,
Z. Najmudin,
H. Nakamura,
P. Norreys,
M. Oliver,
M. Roth,
L. Vassura,
M. Zepf,
M. Borghesi
Abstract:
Calibration of three scintillators (EJ232Q, BC422Q and EJ410) in a time-of-flight (TOF) arrangement using a laser drive-neutron source is presented. The three plastic scintillator detectors were calibrated with gamma insensitive bubble detector spectrometers, which were absolutely calibrated over a wide range of neutron energies ranging from sub MeV to 20 MeV. A typical set of data obtained simult…
▽ More
Calibration of three scintillators (EJ232Q, BC422Q and EJ410) in a time-of-flight (TOF) arrangement using a laser drive-neutron source is presented. The three plastic scintillator detectors were calibrated with gamma insensitive bubble detector spectrometers, which were absolutely calibrated over a wide range of neutron energies ranging from sub MeV to 20 MeV. A typical set of data obtained simultaneously by the detectors are shown, measuring the neutron spectrum emitted from a petawatt laser irradiated thin foil.
△ Less
Submitted 15 June, 2015;
originally announced June 2015.
-
Selective Deuterium Ion Acceleration Using the Vulcan PW Laser
Authors:
AG Krygier,
JT Morrison,
S Kar,
H Ahmed,
A Alejo,
R Clarke,
J Fuchs,
A Green,
D Jung,
A Kleinschmidt,
Z Najmudin,
H Nakamura,
P Norreys,
M Notley,
M Oliver,
M Roth,
L Vassura,
M Zepf,
M Borghesi,
RR Freeman
Abstract:
We report on the successful demonstration of selective acceleration of deuterium ions by target-normal sheath acceleration (TNSA) with a high-energy petawatt laser. TNSA typically produces a multi-species ion beam that originates from the intrinsic hydrocarbon and water vapor contaminants on the target surface. Using the method first developed by Morrison, et al.,$^{1}$ an ion beam with $>$99$\%$…
▽ More
We report on the successful demonstration of selective acceleration of deuterium ions by target-normal sheath acceleration (TNSA) with a high-energy petawatt laser. TNSA typically produces a multi-species ion beam that originates from the intrinsic hydrocarbon and water vapor contaminants on the target surface. Using the method first developed by Morrison, et al.,$^{1}$ an ion beam with $>$99$\%$ deuterium ions and peak energy 14 MeV/nucleon is produced with a 200 J, 700 fs, $>10^{20} W/cm^{2}$ laser pulse by cryogenically freezing heavy water (D$_{2}$O) vapor onto the rear surface of the target prior to the shot. Within the range of our detectors (0-8.5$^{\circ}$), we find laser-to-deuterium-ion energy conversion efficiency of 4.3$\%$ above 0.7 MeV/nucleon while a conservative estimate of the total beam gives a conversion efficiency of 9.4$\%$.
△ Less
Submitted 10 April, 2015; v1 submitted 26 January, 2015;
originally announced January 2015.
-
Backward-propagating MeV electrons from $10^{18}$ W/cm$^2$ laser interactions with water
Authors:
John T. Morrison,
Enam A. Chowdhury,
Kyle D. Frische,
Scott Feister,
Vladimir M. Ovchinnikov,
John A. Nees,
Chris Orban,
Richard R. Freeman,
W. Melvyn Roquemore
Abstract:
We present an experimental study of the generation of $\sim$MeV electrons opposite to the direction of laser propagation following the relativistic interaction at normal incidence of a $\sim$3 mJ, $10^{18}$ W/cm$^2$ short pulse laser with a flowing 30 $μ$m diameter water column target. Faraday cup measurements record hundreds of pC charge accelerated to energies exceeding 120 keV, and energy-resol…
▽ More
We present an experimental study of the generation of $\sim$MeV electrons opposite to the direction of laser propagation following the relativistic interaction at normal incidence of a $\sim$3 mJ, $10^{18}$ W/cm$^2$ short pulse laser with a flowing 30 $μ$m diameter water column target. Faraday cup measurements record hundreds of pC charge accelerated to energies exceeding 120 keV, and energy-resolved measurements of secondary x-ray emissions reveal an x-ray spectrum peaking above 800 keV, which is significantly higher energy than previous studies with similar experimental conditions and more than five times the $\sim$110 keV ponderomotive energy scale for the laser. We show that the energetic x-rays generated in the experiment result from backward-going, high-energy electrons interacting with the focusing optic and vacuum chamber walls with only a small component of x-ray emission emerging from the target itself. We also demonstrate that the high energy radiation can be suppressed through the attenuation of the nanosecond-scale pre-pulse. These results are supported by 2D Particle-in-Cell (PIC) simulations of the laser-plasma interaction that exhibit beam-like backward-propagating MeV electrons.
△ Less
Submitted 15 March, 2015; v1 submitted 9 January, 2015;
originally announced January 2015.
-
Characterisation of deuterium spectra from laser driven multi-species sources by employing differentially filtered image plate detectors in Thomson spectrometers
Authors:
A. Alejo,
S. Kar,
H. Ahmed,
A. G. Krygier,
D. Doria,
R. Clarke,
J. Fernandez,
R. R. Freeman,
J. Fuchs,
A. Green,
J. S. Green,
D. Jung,
A. Kleinschmidt,
C. L. S. Lewis,
J. T. Morrison,
Z. Najmudin,
H. Nakamura,
G. Nersisyan,
P. Norreys,
M. Notley,
M. Oliver,
M. Roth,
J. A. Ruiz,
L. Vassura,
M. Zepf
, et al. (1 additional authors not shown)
Abstract:
A novel method for characterising the full spectrum of deuteron ions emitted by laser driven multi-species ion sources is discussed. The procedure is based on using differential filtering over the detector of a Thompson parabola ion spectrometer, which enables discrimination of deuterium ions from heavier ion species with the same charge-to-mass ratio (such as C6+, O8+, etc.). Commonly used Fuji I…
▽ More
A novel method for characterising the full spectrum of deuteron ions emitted by laser driven multi-species ion sources is discussed. The procedure is based on using differential filtering over the detector of a Thompson parabola ion spectrometer, which enables discrimination of deuterium ions from heavier ion species with the same charge-to-mass ratio (such as C6+, O8+, etc.). Commonly used Fuji Image plates were used as detectors in the spectrometer, whose absolute response to deuterium ions over a wide range of energies was calibrated by using slotted CR-39 nuclear track detectors. A typical deuterium ion spectrum diagnosed in a recent experimental campaign is presented.
△ Less
Submitted 14 September, 2014; v1 submitted 13 August, 2014;
originally announced August 2014.
-
Enhancing Bremsstrahlung Production From Ultraintense Laser-Solid Interactions With Front Surface Structures
Authors:
S. Jiang,
A. G. Krygier,
D. W. Schumacher,
K. U. Akli,
R. R. Freeman
Abstract:
We report the results of a combined study of particle-in-cell and Monte Carlo modeling that investigates the production of Bremsstrahlung radiation produced when an ultraintense laser interacts with a tower-structured target. These targets are found to significantly narrow the electron angular distribution as well as produce significantly higher energies. These features combine to create a signifi…
▽ More
We report the results of a combined study of particle-in-cell and Monte Carlo modeling that investigates the production of Bremsstrahlung radiation produced when an ultraintense laser interacts with a tower-structured target. These targets are found to significantly narrow the electron angular distribution as well as produce significantly higher energies. These features combine to create a significant enhancement in directionality and energy of the Bremstrahlung radiation produced by a high-Z converter target. These studies employ short-pulse, high intensity laser pulses, and indicate that novel target design has potential to greatly enhance the yield and narrow the directionality of high energy electrons and $γ$-rays. We find that the peak $γ$-ray brightness for this source is 6.0$\times$10$^{19}$ ${\rm s^{-1}mm^{-2}mrad^{-2}}$ at 10MeV and 1.4$\times$10$^{19}$ ${\rm s^{-1}mm^{-2}mrad^{-2}}$ at 100MeV (0.1$\%$ bandwidth).
△ Less
Submitted 5 May, 2014;
originally announced May 2014.
-
Dissipative and Dispersive Optomechanics in a Nanocavity Torque Sensor
Authors:
Marcelo Wu,
Aaron C. Hryciw,
Chris Healey,
David P. Lake,
Harishankar Jayakumar,
Mark R. Freeman,
John P. Davis,
Paul E. Barclay
Abstract:
Dissipative and dispersive optomechanical couplings are experimentally observed in a photonic crystal split-beam nanocavity optimized for detecting nanoscale sources of torque. Dissipative coupling of up to approximately $500$ MHz/nm and dispersive coupling of $2$ GHz/nm enable measurements of sub-pg torsional and cantilever-like mechanical resonances with a thermally-limited torque detection sens…
▽ More
Dissipative and dispersive optomechanical couplings are experimentally observed in a photonic crystal split-beam nanocavity optimized for detecting nanoscale sources of torque. Dissipative coupling of up to approximately $500$ MHz/nm and dispersive coupling of $2$ GHz/nm enable measurements of sub-pg torsional and cantilever-like mechanical resonances with a thermally-limited torque detection sensitivity of 1.2$\times 10^{-20} \text{N} \, \text{m}/\sqrt{\text{Hz}}$ in ambient conditions and 1.3$\times 10^{-21} \text{N} \, \text{m}/\sqrt{\text{Hz}}$ in low vacuum. Interference between optomechanical coupling mechanisms is observed to enhance detection sensitivity and generate a mechanical-mode-dependent optomechanical wavelength response.
△ Less
Submitted 5 September, 2014; v1 submitted 25 March, 2014;
originally announced March 2014.
-
On The Origin of Super-Hot Electrons from Intense Laser Interactions with Solid Targets having Moderate Scale Length Preformed Plasmas
Authors:
A. G. Krygier,
D. W. Schumacher,
R. R. Freeman
Abstract:
We use PIC modeling to identify the acceleration mechanism responsible for the observed generation of super-hot electrons in ultra-intense laser-plasma interactions with solid targets with pre-formed plasma. We identify several features of direct laser acceleration (DLA) that drive the generation of super-hot electrons. We find that, in this regime, electrons that become super-hot are primarily in…
▽ More
We use PIC modeling to identify the acceleration mechanism responsible for the observed generation of super-hot electrons in ultra-intense laser-plasma interactions with solid targets with pre-formed plasma. We identify several features of direct laser acceleration (DLA) that drive the generation of super-hot electrons. We find that, in this regime, electrons that become super-hot are primarily injected by a looping mechanism that we call loop-injected direct acceleration (LIDA).
△ Less
Submitted 20 January, 2014; v1 submitted 4 November, 2013;
originally announced November 2013.
-
The Effects of Front-Surface Target Structures on Properties of Relativistic Laser-Plasma Electrons
Authors:
S. Jiang,
A. G. Krygier,
D. W. Schumacher,
K. U. Akli,
R. R. Freeman
Abstract:
We report the results of a study of the role of prescribed geometrical structures on the front of a target in determining the energy and spatial distribution of relativistic laser-plasma electrons. Our 3D PIC simulation studies apply to short-pulse, high intensity laser pulses, and indicate that a judicious choice of target front-surface geometry provides the realistic possibility of greatly enhan…
▽ More
We report the results of a study of the role of prescribed geometrical structures on the front of a target in determining the energy and spatial distribution of relativistic laser-plasma electrons. Our 3D PIC simulation studies apply to short-pulse, high intensity laser pulses, and indicate that a judicious choice of target front-surface geometry provides the realistic possibility of greatly enhancing the yield of high energy electrons, while simultaneously confining the emission to narrow (< 5 degree) angular cones.
△ Less
Submitted 11 October, 2013;
originally announced October 2013.
-
Nanoscale Torsional Optomechanics
Authors:
P. H. Kim,
C. Doolin,
B. D. Hauer,
A. J. R. MacDonald,
M. R. Freeman,
P. E. Barclay,
J. P. Davis
Abstract:
Optomechanical transduction is demonstrated for nanoscale torsional resonators evanescently coupled to optical microdisk whispering gallery mode resonators. The on-chip, integrated devices are measured using a fully fiber-based system, including a tapered and dimpled optical fiber probe. With a thermomechanically calibrated optomechanical noise floor down to 7 fm/sqrt(Hz), these devices open the d…
▽ More
Optomechanical transduction is demonstrated for nanoscale torsional resonators evanescently coupled to optical microdisk whispering gallery mode resonators. The on-chip, integrated devices are measured using a fully fiber-based system, including a tapered and dimpled optical fiber probe. With a thermomechanically calibrated optomechanical noise floor down to 7 fm/sqrt(Hz), these devices open the door for a wide range of physical measurements involving extremely small torques, as little as 4x10^-20 N*m.
△ Less
Submitted 17 November, 2012; v1 submitted 5 October, 2012;
originally announced October 2012.
-
The Schrodinger-like Equation for a Nonrelativistic Electron in a Photon Field of Arbitrary Intensity
Authors:
Dong-Sheng Guo,
R. R. Freeman,
Yong-Shi Wu
Abstract:
The ordinary Schrodinger equation with minimal coupling for a nonrelativistic electron interacting with a single-mode photon field is not satisfied by the nonrelativistic limit of the exact solutions to the corresponding Dirac equation. A Schrodinger-like equation valid for arbitrary photon intensity is derived from the Dirac equation without the weak-field assumption. The "eigenvalue" in the ne…
▽ More
The ordinary Schrodinger equation with minimal coupling for a nonrelativistic electron interacting with a single-mode photon field is not satisfied by the nonrelativistic limit of the exact solutions to the corresponding Dirac equation. A Schrodinger-like equation valid for arbitrary photon intensity is derived from the Dirac equation without the weak-field assumption. The "eigenvalue" in the new equation is an operator in a Cartan subalgebra. An approximation consistent with the nonrelativistic energy level derived from its relativistic value replaces the "eigenvalue" operator by an ordinary number, recovering the ordinary Schrodinger eigenvalue equation used in the formal scattering formalism. The Schrodinger-like equation for the multimode case is also presented.
△ Less
Submitted 4 June, 1998;
originally announced June 1998.
