Showing 1–42 of 42 results for author: Jing, Y

Engineering Moiré Meta-crystals with Conventional Photonic and Phononic Structures

Authors: Mourad Oudich, Xianghong Kong, Tan Zhang, Chengwei Qiu, Yun Jing

Abstract: Recent discoveries on Mott insulating and unconventional superconducting states in twisted bilayer graphene with Moiré superlattices have reshaped the landscape of ''twistronics'' and paved the way for developing high-temperature superconductors and new devices for quantum computing and sensing. Meanwhile, artificially structured photonic and phononic metamaterials/crystals (or meta-crystals) have… ▽ More Recent discoveries on Mott insulating and unconventional superconducting states in twisted bilayer graphene with Moiré superlattices have reshaped the landscape of ''twistronics'' and paved the way for developing high-temperature superconductors and new devices for quantum computing and sensing. Meanwhile, artificially structured photonic and phononic metamaterials/crystals (or meta-crystals) have become a fertile playground for emulating quantum-mechanical features of condensed matter systems, revealing new routes for robust control of classical waves. Drawing inspiration from the success of twisted bilayer graphene, this perspective casts an overarching framework of the emerging Moiré photonic and phononic meta-crystals that promise novel classical-wave devices. We begin with the fundamentals of Moiré superlattices, before highlighting recent works that exploit twist angle and interlayer coupling as new ingredients to engineer and tailor the band structures and effective material properties of photonic and phononic meta-crystals. We finally discuss future directions and promises of this emerging area in materials science and wave physics. △ Less

Submitted 11 December, 2023; originally announced December 2023.

Comments: 4 figures

On the importance of low-frequency signals in functional and molecular photoacoustic computed tomography

Authors: Tri Vu, Paul Klippel, Aidan J. Canning, Chenshuo Ma, Huijuan Zhang, Ludmila A. Kasatkina, Yuqi Tang, Jun Xia, Vladislav V. Verkhusha, Tuan Vo-Dinh, Yun Jing, Junjie Yao

Abstract: In photoacoustic computed tomography (PACT) with short-pulsed laser excitation, wideband acoustic signals are generated in biological tissues with frequencies related to the effective shapes and sizes of the optically absorbing targets. Low-frequency photoacoustic signal components correspond to slowly varying spatial features and are often omitted during imaging due to the limited detection bandw… ▽ More In photoacoustic computed tomography (PACT) with short-pulsed laser excitation, wideband acoustic signals are generated in biological tissues with frequencies related to the effective shapes and sizes of the optically absorbing targets. Low-frequency photoacoustic signal components correspond to slowly varying spatial features and are often omitted during imaging due to the limited detection bandwidth of the ultrasound transducer, or during image reconstruction as undesired background that degrades image contrast. Here we demonstrate that low-frequency photoacoustic signals, in fact, contain functional and molecular information, and can be used to enhance structural visibility, improve quantitative accuracy, and reduce spare-sampling artifacts. We provide an in-depth theoretical analysis of low-frequency signals in PACT, and experimentally evaluate their impact on several representative PACT applications, such as mapping temperature in photothermal treatment, measuring blood oxygenation in a hypoxia challenge, and detecting photoswitchable molecular probes in deep organs. Our results strongly suggest that low-frequency signals are important for functional and molecular PACT. △ Less

Submitted 1 August, 2023; originally announced August 2023.

Improved Calibration of RF Cavities for Relativistic Electron Beams: Effects of Secondary Corrections and Experimental Verification

Authors: K. Shih, I. Petrushina, V. N. Litvinenko, I. Pinayev, J. Ma, G. Wang, Y. Jing, Y. Wu

Abstract: In the aspect of longitudinal beam bunching, the bunching strength can be controlled by the RF cavity phase and voltage. However, these machine parameters are different from those that interact with the beam itself. In order to gain control of the beam-cavity interaction, cavity calibration must be performed. Furthermore, it relies on fitting the beam energy gain versus cavity phase to a calibrati… ▽ More In the aspect of longitudinal beam bunching, the bunching strength can be controlled by the RF cavity phase and voltage. However, these machine parameters are different from those that interact with the beam itself. In order to gain control of the beam-cavity interaction, cavity calibration must be performed. Furthermore, it relies on fitting the beam energy gain versus cavity phase to a calibration function. Under the conventional assumption of relativistic beam conditions, the calibration function is a first harmonic sinusoidal function (a sinusoidal function with a period of 2π). However, this expression is insufficient for a high-voltage bunching cavity. Due to beam acceleration inside the cavity, an energy bias and a second harmonic function should be included to modify the conventional calibration function, even for a relativistic electron beam. In this paper, we will derive this modification and provide a comparison to both the Coherent Electron Cooling Experiment and the IMPACT-T simulation, respectively. △ Less

Submitted 31 May, 2023; originally announced May 2023.

Journal ref: Physical Review ACCELERATORS AND BEAMS 2023

3D Theory of Microscopic Instabilities Driven by Space-Charge Forces

Authors: Vladimir Litvinenko, Yichao Jing, Jun Ma, Irina Petrushina, Kai Shih, Gang Wang

Abstract: Microscopic, or short-wavelength, instabilities are known for drastic reduction of the beam quality and strong amplification of the noise in a beam. Space charge and coherent synchrotron radiation are known to be the leading causes for such instabilities. In this paper we present rigorous 3D theory of such instabilities driven by the space-charge forces. We define the condition when our theory is… ▽ More Microscopic, or short-wavelength, instabilities are known for drastic reduction of the beam quality and strong amplification of the noise in a beam. Space charge and coherent synchrotron radiation are known to be the leading causes for such instabilities. In this paper we present rigorous 3D theory of such instabilities driven by the space-charge forces. We define the condition when our theory is applicable for an arbitrary accelerator system with 3D coupling. Finally, we derive a linear integral equation describing such instability and identify conditions when it can be reduced to an ordinary second order differential equation. △ Less

Submitted 24 October, 2022; originally announced October 2022.

Comments: 38 pages, 3 figures. arXiv admin note: substantial text overlap with arXiv:2101.04103

Topology-enabled highly efficient beam combination

Authors: Yuhao Jing, Yucong Yang, Wei Yan, Songgang Cai, Jiejun Su, Weihan Long, Nuo Chen, Yu Yu, Lei Bi, Yuntian Chen

Abstract: Beam combination with high efficiency is desirable to overcome the power limit of single electromagnetic sources, enabling long-distance optical communication and high-power laser. The efficiency of coherent beam combination is severely limited by the phase correlation between different input light beams. Here, we theoretically proposed and experimentally demonstrated a new mechanism for beam comb… ▽ More Beam combination with high efficiency is desirable to overcome the power limit of single electromagnetic sources, enabling long-distance optical communication and high-power laser. The efficiency of coherent beam combination is severely limited by the phase correlation between different input light beams. Here, we theoretically proposed and experimentally demonstrated a new mechanism for beam combining, the topology-enabled beam combination (TEBC), from multiple spatial channels with high efficiency based on a unidirectional topological edge state. We show that the topologically protected power orthogonal excitation arising from both the unidirectional edge states and the energy conservation ensures -0.31dB (93%) efficiency experimentally for a multi-channel combination of coherent microwaves at 9.1-9.3 GHz. Moreover, we demonstrate broadband, phase insensitive, and high-efficiency beam combination using the TEBC mechanism with one single topological photonic crystal device, which significantly reduces the device footprint and design complexity. Our scheme transcends the limits of the required phase correlations in the scenario of coherent beam combination and the number of combined channels in the scenario of incoherent beam combination. △ Less

Submitted 21 October, 2022; originally announced October 2022.

Comments: 15 pages, 4 figures

Twin-field quantum key distribution without optical frequency dissemination

Authors: Lai Zhou, Jinping Lin, Yumang Jing, Zhiliang Yuan

Abstract: Twin-field (TF) quantum key distribution (QKD) has rapidly risen as the most viable solution to long-distance secure fibre communication thanks to its fundamentally repeater-like rate-loss scaling. However, its implementation complexity, if not successfully addressed, could impede or even prevent its advance into real-world. To satisfy its requirement for twin-field coherence, all present setups a… ▽ More Twin-field (TF) quantum key distribution (QKD) has rapidly risen as the most viable solution to long-distance secure fibre communication thanks to its fundamentally repeater-like rate-loss scaling. However, its implementation complexity, if not successfully addressed, could impede or even prevent its advance into real-world. To satisfy its requirement for twin-field coherence, all present setups adopted essentially a gigantic, resource-inefficient interferometer structure that lacks scalability that mature QKD systems provide with simplex quantum links. Here we introduce a novel technique that can stabilise an open channel without using a closed interferometer and has general applicability to phase-sensitive quantum communications. Using locally generated frequency combs to establish mutual coherence, we develop a simple and versatile TF-QKD setup that does not need service fibre and can operate over links of 100 km asymmetry. We confirm the setup's repeater-like behaviour and obtain a finite-size rate of 0.32 bit/s at a distance of 615.6 km. △ Less

Submitted 31 March, 2023; v1 submitted 19 August, 2022; originally announced August 2022.

Comments: 14 pages, 7 figures

Journal ref: Nature Communications 14, 928 (2023)

Tailoring Structure-borne Sound Through Bandgap Engineering in Phononic Crystals and Metamaterials: A Comprehensive Review

Authors: Mourad Oudich, Nikhil JRK Gerard, Yuanchen Deng, Yun Jing

Abstract: In solid state physics, a bandgap (BG) refers to a range of energies where no electronic states can exist. This concept was extended to classical waves, spawning the entire fields of photonic and phononic crystals where BGs are frequency (or wavelength) intervals where wave propagation is prohibited. For elastic waves, BGs are found in periodically alternating mechanical properties (i.e., stiffnes… ▽ More In solid state physics, a bandgap (BG) refers to a range of energies where no electronic states can exist. This concept was extended to classical waves, spawning the entire fields of photonic and phononic crystals where BGs are frequency (or wavelength) intervals where wave propagation is prohibited. For elastic waves, BGs are found in periodically alternating mechanical properties (i.e., stiffness and density). This gives birth to phononic crystals and later elastic metamaterials that have enabled unprecedented functionalities for a wide range of applications. Planar metamaterials are built for vibration shielding, while a myriad of works focus on integrating phononic crystals in microsystems for filtering, waveguiding, and dynamical strain energy confinement in optomechanical systems. Furthermore, the past decade has witnessed the rise of topological insulators, which leads to the creation of elastodynamic analogs of topological insulators for robust manipulation of mechanical waves. Meanwhile, additive manufacturing has enabled the realization of 3D architected elastic metamaterials, which extends their functionalities. This review aims to comprehensively delineate the rich physical background and the state-of-the art in elastic metamaterials and phononic crystals that possess engineered BGs for different functionalities and applications, and to provide a roadmap for future directions of these manmade materials. △ Less

Submitted 20 May, 2023; v1 submitted 11 July, 2022; originally announced July 2022.

Comments: 11 Figures

First experience with He conditioning of an SRF photoinjector

Authors: Irina Petrushina, Yichao Jing, Vladimir N. Litvinenko, Jun Ma, Freddy Severino, Geetha Narayan, Thomas Hayes, Jean C. Brutus, Loralie Smart, Kenneth Decker, Sergey Belomestnykh

Abstract: The recent achievements in the performance of superconducting RF (SRF) photoinjectors have opened a new era in the development of the reliable high-brightness CW electron sources. While the SRF guns become one of the most promising technologies, the compatibility of SRF environment with the complex photocathodes remains on the forefront of the modern accelerator science. The SRF cavities operate a… ▽ More The recent achievements in the performance of superconducting RF (SRF) photoinjectors have opened a new era in the development of the reliable high-brightness CW electron sources. While the SRF guns become one of the most promising technologies, the compatibility of SRF environment with the complex photocathodes remains on the forefront of the modern accelerator science. The SRF cavities operate at cryogenic temperatures providing the ultra-high vacuum (UHV) environment highly beneficial for the photocathode performance. However, the necessity to keep the photocathodes at room temperature while being surrounded by the cavity walls that are kept at cryogenic temperatures creates an additional complexity for the SRF gun design and operation. The complex and volatile chemical compounds used for photocathodes have a high chance of contaminating the surfaces of an SRF cavity. When deposited, such compounds could create centers for cold electron emission which degrade performance of the SRF guns. Such a circumstance would require development of the in-situ processing techniques for restoring the SRF cavity performance. This paper presents the results of the successful implementation and application of the He conditioning method for cavity restoration using the existing SRF photoinjector at Brookhaven National Laboratory (BNL). The method has proven to be extremely effective and resulted in a dramatic improvement of the BNL gun performance. △ Less

Submitted 28 April, 2022; originally announced April 2022.

The ReLiC: Recycling Linear $e^+e^-$ Collider

Authors: Vladimir N Litvinenko, Nikhil Bachhawat, Maria Chamizo-Llatas, Yichao Jing, François Méot, Irina Petrushina, Thomas Roser

Abstract: In this white paper we describe concept of $e^+e^-$ linear collider recycling both the used particles and the used beam energy. In this white paper we describe concept of $e^+e^-$ linear collider recycling both the used particles and the used beam energy. △ Less

Submitted 12 March, 2022; originally announced March 2022.

Comments: 7 pages, 3 figures, Snowmass White paper

Benchmark problems for transcranial ultrasound simulation: Intercomparison of compressional wave models

Authors: Jean-Francois Aubry, Oscar Bates, Christian Boehm, Kim Butts Pauly, Douglas Christensen, Carlos Cueto, Pierre Gelat, Lluis Guasch, Jiri Jaros, Yun Jing, Rebecca Jones, Ningrui Li, Patrick Marty, Hazael Montanaro, Esra Neufeld, Samuel Pichardo, Gianmarco Pinton, Aki Pulkkinen, Antonio Stanziola, Axel Thielscher, Bradley Treeby, Elwin van 't Wout

Abstract: Computational models of acoustic wave propagation are frequently used in transcranial ultrasound therapy, for example, to calculate the intracranial pressure field or to calculate phase delays to correct for skull distortions. To allow intercomparison between the different modeling tools and techniques used by the community, an international working group was convened to formulate a set of numeric… ▽ More Computational models of acoustic wave propagation are frequently used in transcranial ultrasound therapy, for example, to calculate the intracranial pressure field or to calculate phase delays to correct for skull distortions. To allow intercomparison between the different modeling tools and techniques used by the community, an international working group was convened to formulate a set of numerical benchmarks. Here, these benchmarks are presented, along with intercomparison results. Nine different benchmarks of increasing geometric complexity are defined. These include a single-layer planar bone immersed in water, a multi-layer bone, and a whole skull. Two transducer configurations are considered (a focused bowl and a plane piston), giving a total of 18 permutations of the benchmarks. Eleven different modeling tools are used to compute the benchmark results. The models span a wide range of numerical techniques, including the finite-difference time-domain method, angular-spectrum method, pseudospectral method, boundary-element method, and spectral-element method. Good agreement is found between the models, particularly for the position, size, and magnitude of the acoustic focus within the skull. When comparing results for each model with every other model in a cross comparison, the median values for each benchmark for the difference in focal pressure and position are less than 10\% and 1 mm, respectively. The benchmark definitions, model results, and intercomparison codes are freely available to facilitate further comparisons. △ Less

Submitted 9 February, 2022; originally announced February 2022.

Comments: 18 pages, 7 figures

Observation of higher-order exceptional points in a non-local acoustic metagrating

Authors: Xinsheng Fang, Nikhil JRK Gerard, Zhiling Zhou, Hua Ding, Nengyin Wang, Bin Jia, Yuanchen Deng, Xu Wang, Yun Jing, Yong Li

Abstract: Higher-order exceptional points have attracted increased attention in recent years due to their enhanced sensitivity and distinct topological features. Here, we show that nonlocal acoustic metagratings that enable precise and simultaneous control over their muliple orders of diffraction, can serve as a robust platform for investigating higher-order exceptional points in free space. The proposed me… ▽ More Higher-order exceptional points have attracted increased attention in recent years due to their enhanced sensitivity and distinct topological features. Here, we show that nonlocal acoustic metagratings that enable precise and simultaneous control over their muliple orders of diffraction, can serve as a robust platform for investigating higher-order exceptional points in free space. The proposed metagratings, not only could advance the fundamental research of arbitrary order exceptional points, but could also empower unconventional free-space wave manipulation for applications related to sensing and extremely asymmetrical wave control. △ Less

Submitted 29 June, 2021; originally announced June 2021.

Bilayer Photonic Graphene

Authors: Mourad Oudich, Guangxu Su, Yuanchen Deng, Wladimir Benalcazar, Renwen Huang, Nikhil JRK Gerard, Minghui Lu, Peng Zhan, Yun Jing

Abstract: Drawing inspiration from bilayer graphene, this paper introduces its photonic analog comprising two stacked graphene-like photonic crystals, that are coupled in the near-field through spoof surface plasmons. Beyond the twist degree of freedom that can radically alter the band structure of the bilayer photonic graphene, the photonic dispersion can be also tailored via the interlayer coupling which… ▽ More Drawing inspiration from bilayer graphene, this paper introduces its photonic analog comprising two stacked graphene-like photonic crystals, that are coupled in the near-field through spoof surface plasmons. Beyond the twist degree of freedom that can radically alter the band structure of the bilayer photonic graphene, the photonic dispersion can be also tailored via the interlayer coupling which exhibits an exponential dependence on the distance between the two photonic crystals. We theoretically, numerically, and experimentally characterize the band structures of AA- and AB-stacked bilayer photonic graphene, as well as for twisted bilayer photonic graphene with even and odd sublattice exchange symmetries. Furthermore, we numerically predict the existence of magic angles in bilayer photonic graphene, which are associated with ultra-flat bands resulted from interlayer hybridization. Finally, we demonstrate that the bilayer photonic graphene at a particular twist angle satisfying even sublattice exchange symmetry is a high-order photonic topological insulator. The proposed bilayer photonic graphene could constitute a useful platform for identifying new quantum materials and inspiring next-generation photonic devices with new degrees of freedom and emerging functionality. △ Less

Submitted 14 February, 2021; originally announced March 2021.

Journal ref: Phys. Rev. B 103, 214311 (2021)

Systematic design and experimental demonstration of transmission-type multiplexed acoustic meta-holograms

Authors: Yifan Zhu, Nikhil JRK Gerard, Xiaoxing Xia, Grant C. Stevenson, Liyun Cao, Shiwang Fan, Christopher M. Spadaccini, Yun Jing, Badreddine Assouar

Abstract: Acoustic holograms have promising applications in sound-field reconstruction, particle manipulation, ultrasonic haptics and therapy. This paper reports on the theoretical, numerical, and experimental investigation of multiplexed acoustic holograms at both audio and ultrasonic frequencies via a rationally designed transmission-type acoustic metamaterial. The proposed meta-hologram is composed of tw… ▽ More Acoustic holograms have promising applications in sound-field reconstruction, particle manipulation, ultrasonic haptics and therapy. This paper reports on the theoretical, numerical, and experimental investigation of multiplexed acoustic holograms at both audio and ultrasonic frequencies via a rationally designed transmission-type acoustic metamaterial. The proposed meta-hologram is composed of two Fabry-Perot resonant channels per unit cell, which enables the simultaneous modulation of the transmitted amplitude and phase at two desired frequencies. In contrast to conventional acoustic metamaterial-based holograms, the design strategy proposed here, provides a new degree of freedom (frequency) that can actively tailor holograms that are otherwise completely passive and hence significantly enhances the information encoded in acoustic metamaterials. To demonstrate the multiplexed acoustic metamaterial, we first show the projection of two different high-quality meta-holograms at 14 kHz and 17 kHz, with the patterns of the letters, N and S. We then demonstrate two-channel ultrasound focusing and annular beams generation for the incident ultrasonic frequencies of 35 kHz and 42.5 kHz. These multiplexed acoustic meta-holograms offer a technical advance to tackle the rising challenges in the fields of acoustic metamaterials, architectural acoustics, and medical ultrasound. △ Less

Submitted 7 January, 2021; originally announced January 2021.

A metasurface composed of 3-bit coding linear polarization conversion elements and its application to RCS reduction of patch antenna

Authors: Xiangkun Kong, Qi Wang, Shunliu Jiang, Lingqi Kong, Yuan Jing, Xiangxi Yan, Xing Zhao

Abstract: In this paper, a low radar cross section (RCS) patch antenna based on the 3-bit metasurface composed of linear polarization conversion elements is designed. At first, 3-bit coding metamaterials are constructed by a sequence of eight coded unit cells, which have a similar cross-polarized reflected amplitude response and gradient reflected phase responses covering 0~2π, respectively. Equivalent circ… ▽ More In this paper, a low radar cross section (RCS) patch antenna based on the 3-bit metasurface composed of linear polarization conversion elements is designed. At first, 3-bit coding metamaterials are constructed by a sequence of eight coded unit cells, which have a similar cross-polarized reflected amplitude response and gradient reflected phase responses covering 0~2π, respectively. Equivalent circuit models (ECMs) of these unit cells are created to describe their electrical behavior for the two linear incident polarizations at the same time. Then, a patch antenna is integrated on the 3-bit metasurface, of which the elements are placed with a 2-dimensional linear coding sequence. The metal square ring is set around the patch antenna to protect it from the disturbance of metasurface. Both the simulation and experiment results demonstrate that the designed metasurface can primarily reduce the antenna RCS at a broadband, while the antenna performances are not degraded significantly. △ Less

Submitted 22 July, 2020; v1 submitted 9 April, 2020; originally announced April 2020.

High brightness CW electron beams from Superconducting RF photoemission gun

Authors: I. Petrushina, V. N. Litvinenko, Y. Jing, J. Ma, I. Pinayev, K. Shih, G. Wang, Y. H. Wu, J. C. Brutus, Z. Altinbas, A. Di Lieto, P. Inacker, J. Jamilkowski, G. Mahler, M. Mapes, T. Miller, G. Narayan, M. Paniccia, T. Roser, F. Severino, J. Skaritka, L. Smart, K. Smith, V. Soria, Y. Than , et al. (10 additional authors not shown)

Abstract: CW photoinjectors operating at high accelerating gradients promise to revolutionize many areas of science and applications. They can establish the basis for a new generation of monochromatic X-ray free electron lasers, high brightness hadron beams, or a new generation of microchip production. In this letter we report on the record-performing superconducting RF electron gun with… ▽ More CW photoinjectors operating at high accelerating gradients promise to revolutionize many areas of science and applications. They can establish the basis for a new generation of monochromatic X-ray free electron lasers, high brightness hadron beams, or a new generation of microchip production. In this letter we report on the record-performing superconducting RF electron gun with $\textrm{CsK}_{2}\textrm{Sb}$ photocathode. The gun is generating high charge electron bunches (up to 10 nC/bunch) and low transverse emittances, while operating for months with a single photocathode. This achievement opens a new era in generating high-power beams with a very high average brightness. △ Less

Submitted 16 March, 2020; v1 submitted 12 March, 2020; originally announced March 2020.

Journal ref: Phys. Rev. Lett. 124, 244801 (2020)

Low-frequency broadband acoustic metasurface absorbing panels

Authors: Jun Ji, Dongting Li, Yong Li, Yun Jing

Abstract: A broadband sound absorption attained by a deep-subwavelength structure is of great interest to the noise control community especially for extremely low frequencies (20-100 Hz) in room acoustics. Coupling multiple different resonant unit cells has been an effective strategy to achieve a broadband sound absorption. In this paper, we report on an analytical, numerical and experimental study of a low… ▽ More A broadband sound absorption attained by a deep-subwavelength structure is of great interest to the noise control community especially for extremely low frequencies (20-100 Hz) in room acoustics. Coupling multiple different resonant unit cells has been an effective strategy to achieve a broadband sound absorption. In this paper, we report on an analytical, numerical and experimental study of a low-frequency broadband (50-63 Hz, one third octave band), high absorption (average absorption coefficient around 93%), near-omnidirectional (0°-75°) acoustic metasurface absorber composed of 4 coupled unit cells at a thickness of 15.4 cm (1/45 of the wavelength at 50 Hz). The absorption by such a deep-subwavelength structure occurs due to a strong coupling between unit cells, which is realized by carefully engineering geometric parameters of each unit cell, especially the judicious assignment of lateral size to each unit cell. To further broaden the bandwidth (50-100 Hz, one octave band), a design with 19 unit cells coupled in a supercell is analytically studied to achieve an average absorption coefficient of 85% for a wide angle range (0°-75°) at a thickness of 20 cm (1/34 of wavelength at 50 Hz). Two additional degrees of freedom, the lateral size of supercell and the number of unit cells in the supercell, are demonstrated to facilitate such a causally optimal design which is close to the ideally causal optimality. The proposed design methodology may solve the long-standing issue for low frequency absorption in room acoustics. △ Less

Submitted 12 February, 2020; originally announced February 2020.

Journal ref: Front. Mech. Eng. 6:586249. 2020

Omnidirectional elastic wave attenuation via an isotoxal-star-based auxetic micro-lattice

Authors: Nikhil JRK Gerard, Mourad Oudich, Yun Jing

Abstract: This paper introduces a micro-lattice based metamaterial for low frequency wide-band vibration attenuation, that is enabled by engineering the metamaterial's building blocks to induce local resonance bandgaps for elastic waves in all directions of propagation. The transmission rate through the proposed structure is examined and strong wave attenuation is demonstrated for a remarkably small number… ▽ More This paper introduces a micro-lattice based metamaterial for low frequency wide-band vibration attenuation, that is enabled by engineering the metamaterial's building blocks to induce local resonance bandgaps for elastic waves in all directions of propagation. The transmission rate through the proposed structure is examined and strong wave attenuation is demonstrated for a remarkably small number of unit cells. Additionally, it is shown that the bandgaps are tailorable via the geometrical parameters and can be leveraged to design a hybrid metamaterial with an extremely wide bandgap. Alongside being thin, lightweight, and capable of attenuating elastic waves in all directions, the proposed material also possesses the second order functionality of exhibiting a negative Poisson's ratio and can pave the way for identifying exotic functional materials. △ Less

Submitted 17 December, 2019; originally announced December 2019.

Organic Thermoelectric Textiles for Harvesting Thermal Energy and Powering Electronics

Authors: Yuanyuan Zheng, Qihao Zhang, Wenlong Jin, Yuanyuan Jing, Xinyi Chen, Xue Han, Qinye Bao, Yanping Liu, Xinhou Wang, Shiren Wang, Yiping Qiu, Kun Zhang, Chongan Di

Abstract: Wearable thermoelectric devices show promises to generate electricity in a ubiquitous, unintermittent and noiseless way for on-body applications. Three-dimensional thermoelectric textiles (TETs) outperform other types in smart textiles owing to their out-of-plane thermoelectric generation and good structural conformability with fabrics. Yet, there has been lack of efficient strategies in scalable… ▽ More Wearable thermoelectric devices show promises to generate electricity in a ubiquitous, unintermittent and noiseless way for on-body applications. Three-dimensional thermoelectric textiles (TETs) outperform other types in smart textiles owing to their out-of-plane thermoelectric generation and good structural conformability with fabrics. Yet, there has been lack of efficient strategies in scalable manufacture of TETs for sustainably powering electronics. Here, we fabricate organic spacer fabric shaped TETs by knitting carbon nanotube yarn based segmented thermoelectric yarn in large scale. Combing finite element analysis with experimental evaluation, we elucidate that the fabric structure significantly influences the power generation. The optimally designed TET with good wearability and stability shows high output power density of 51.5 mW/m2 and high specific power of 173.3 uW/(g.K) at delta T= 47.5 K. The promising on-body applications of the TET in directly and continuously powering electronics for healthcare and environmental monitoring is fully demonstrated. This work will broaden the research vision and provide new routines for developing high-performance and large-scale TETs toward practical applications. △ Less

Submitted 10 July, 2019; originally announced July 2019.

Comments: 56 pages,13 figures

A Modified Mixed Domain Method for Modeling Acoustic Wave Propagation in Strongly Heterogeneous Media

Authors: Juanjuan Gu, Yun Jing

Abstract: In this paper, phase correction and amplitude compensation are introduced to a previously developed mixed domain method (MDM), which is only accurate for modeling wave propagation in weakly heterogeneous media. Multiple reflections are also incorporated with the one-way model to improve the accuracy. The resulting model is denoted as the modified mixed-domain method (MMDM) and is numerically evalu… ▽ More In this paper, phase correction and amplitude compensation are introduced to a previously developed mixed domain method (MDM), which is only accurate for modeling wave propagation in weakly heterogeneous media. Multiple reflections are also incorporated with the one-way model to improve the accuracy. The resulting model is denoted as the modified mixed-domain method (MMDM) and is numerically evaluated for its accuracy and efficiency using two distinct cases: a layered medium and a human skull. It is found that the MMDM is significantly more accurate than the MDM for strongly heterogeneous media, especially when the phase aberrating layer is roughly perpendicular to the acoustic beam. Additionally, convergence study suggests that the second-order reflection is sufficient for wave modeling in lossy biological media. The method developed in this work could be used to facilitate therapeutic ultrasound for treating brain-related diseases and disorders. △ Less

Submitted 21 November, 2019; v1 submitted 14 May, 2019; originally announced May 2019.

Space-Time Phononic Crystals with Anomalous Topological Edge States

Authors: Mourad Oudich, Yuanchen Deng, Molei Tao, Yun Jing

Abstract: It is well known that an interface created by two topologically distinct structures could host nontrivial edge states that are immune to defects. In this letter, we introduce a one-dimensional space-time phononic crystal and study the associated anomalous topological edge states. A space-decoupled time modulation is assumed. While preserving the key topological feature of the system, such a modula… ▽ More It is well known that an interface created by two topologically distinct structures could host nontrivial edge states that are immune to defects. In this letter, we introduce a one-dimensional space-time phononic crystal and study the associated anomalous topological edge states. A space-decoupled time modulation is assumed. While preserving the key topological feature of the system, such a modulation also duplicates the edge state mode across the spectrum, both inside and outside the band gap. It is shown that, in contrast to conventional topological edge states which are excited by frequencies in the Bragg regime, the time-modulation-induced frequency conversion can be leveraged to access topological edge states at a deep subwavelength scale where the entire phononic crystal size is merely 1/5.1 of the wavelength. This remarkable feature could open a new route for designing miniature devices that are based on topological physics. △ Less

Submitted 15 July, 2019; v1 submitted 4 April, 2019; originally announced April 2019.

Journal ref: Phys. Rev. Research 1, 033069 (2019)

Extremely asymmetrical acoustic metasurface mirror at the exceptional point

Authors: Xu Wang, Xinsheng Fang, Dongxing Mao, Yun Jing, Yong Li

Abstract: Previous research has attempted to minimize the influence of loss in reflection- and transmission-type acoustic metasurfaces. This letter shows that, by treating the acoustic metasurface as a non-Hermitian system and by harnessing loss, unconventional wave behaviors that do not exist in lossless metasurfaces can be uncovered. Specifically, we theoretically and experimentally demonstrate a non-Herm… ▽ More Previous research has attempted to minimize the influence of loss in reflection- and transmission-type acoustic metasurfaces. This letter shows that, by treating the acoustic metasurface as a non-Hermitian system and by harnessing loss, unconventional wave behaviors that do not exist in lossless metasurfaces can be uncovered. Specifically, we theoretically and experimentally demonstrate a non-Hermitian acoustic metasurface mirror featuring extremely asymmetrical reflection at the exception point. As an example, the metasurface mirror is designed to have high-efficiency retro-reflection when the wave incidents from one side and complete absorption when the wave incidents from the other side. This work marries conventional gradient index metasurfaces with the exception point from non-Hermitian systems, and paves the way for identifying new mechanisms and functionalities for wave manipulation. △ Less

Submitted 20 March, 2019; v1 submitted 15 March, 2019; originally announced March 2019.

Comments: 5 pages, 4 figures

Journal ref: Phys. Rev. Lett. 123, 214302 (2019)

Bending sound around sharp corners without using topological edge states

Authors: Liting Wu, Mourad Oudich, Wenkang Cao, Haolin Jiang, Cheng Zhang, Junchen Ke, Jin Yang, Yuanchen Deng, Qiang Cheng, Tiejun Cui, Yun Jing

Abstract: Routing and guiding acoustic waves around sharp corners without backscattering losses is of great interest in the acoustics community. Sonic crystals have been primarily utilized to design backscattering-immune waveguides. While conventional approaches use defects to guide waves, a considerably more sophisticated and robust approach was recently developed based on topological edge states. In this… ▽ More Routing and guiding acoustic waves around sharp corners without backscattering losses is of great interest in the acoustics community. Sonic crystals have been primarily utilized to design backscattering-immune waveguides. While conventional approaches use defects to guide waves, a considerably more sophisticated and robust approach was recently developed based on topological edge states. In this paper, we propose a radically different theoretical framework based on extremely anisotropic metamaterials for engineering backscattering-immune waveguides. We theoretically derived the exact condition for one-way wave propagation in zigzag paths, and identified a number of key advantages of the current design over topologically protected waveguides. While the theoretical underpinning is universal and is applicable to acoustic and electromagnetic waves, the experimental validation was conducted using spoof surface acoustic waves. The proposed metamaterial could open up new possibilities for wave manipulation and lead to applications in on-chip devices and noise control. △ Less

Submitted 13 March, 2019; originally announced March 2019.

Plasma-Cascade Instability- theory, simulations and experiment

Authors: Vladimir N. Litvinenko, Gang Wang, Yichao Jing, Dmitry Kayran, Jun Ma, Irina Petrushina, Igor Pinayev, Kai Shih

Abstract: In this letter we describe a new micro-bunching instability occurring in charged particle beams propagating along a straight trajectory: based on the dynamics we named it a Plasma Cascade Instability. In this letter we describe a new micro-bunching instability occurring in charged particle beams propagating along a straight trajectory: based on the dynamics we named it a Plasma Cascade Instability. △ Less

Submitted 27 February, 2019; originally announced February 2019.

Comments: 16 pages, 6 figures

Journal ref: Phys. Rev. Accel. Beams 24, 014402 (2021)

Solenoid: universal tool for measuring beam parameters

Authors: Igor Pinayev, Yichao Jing, Dmitry Kayran, Vladimir N. Litvinenko, Kentaro Mihara, Irina Petrushina, Kay Shih, Gang Wang

Abstract: Solenoids are frequently used for focusing of the low energy electron beams. In this paper we focus on using these magnets as a nearly universal tool for measuring beam parameters including energy, emittance, and the beam position and angle with respect to the solenoid axis. We describe in detail corresponding procedures as well as experimental results of such measurements. Solenoids are frequently used for focusing of the low energy electron beams. In this paper we focus on using these magnets as a nearly universal tool for measuring beam parameters including energy, emittance, and the beam position and angle with respect to the solenoid axis. We describe in detail corresponding procedures as well as experimental results of such measurements. △ Less

Submitted 25 February, 2019; originally announced February 2019.

Guiding Robust Valley-dependent Edge States by Surface Acoustic Waves

Authors: Zhen Wang, Fu-Kang Liu, Si-Yuan Yu, Shi-Ling Yan, Ming-Hui Lu, Yun Jing, Yan-Feng Chen

Abstract: Recently, the concept of valley pseudospin, labeling quantum states of energy extrema in momentum space, has attracted enormous attention because of its potential as a new type of information carrier. Here, we present surface acoustic wave (SAW) waveguides, which utilize and transport valley pseudospins in two-dimensional SAW phononic crystals (PnCs). In addition to a direct visualization of the v… ▽ More Recently, the concept of valley pseudospin, labeling quantum states of energy extrema in momentum space, has attracted enormous attention because of its potential as a new type of information carrier. Here, we present surface acoustic wave (SAW) waveguides, which utilize and transport valley pseudospins in two-dimensional SAW phononic crystals (PnCs). In addition to a direct visualization of the valley-dependent states excited from the corresponding chiral sources, the backscattering suppression of SAW valley-dependent edge states transport is observed in sharply curved interfaces. By means of band structure engineering, elastic wave energy in the SAW waveguides can be transported with remarkable robustness, which is very promising for new generations of integrated solid-state phononic circuits with great versatility. △ Less

Submitted 8 October, 2018; originally announced October 2018.

Electronics of Time-of-flight Measurement for Back-n at CSNS

Authors: T. Yu, P. Cao, X. Y. Ji, L. K. Xie, X. R. Huang, Q. An, H. Y. Bai, J. Bao, Y. H. Chen, P. J. Cheng, Z. Q. Cui, R. R. Fan, C. Q. Feng, M. H. Gu, Z. J. Han, G. Z. He, Y. C. He, Y. F. He, H. X. Huang, W. L. Huang, X. L. Ji, H. Y. Jiang, W. Jiang, H. Y. Jing, L. Kang , et al. (46 additional authors not shown)

Abstract: Back-n is a white neutron experimental facility at China Spallation Neutron Source (CSNS). The time structure of the primary proton beam make it fully applicable to use TOF (time-of-flight) method for neutron energy measuring. We implement the electronics of TOF measurement on the general-purpose readout electronics designed for all of the seven detectors in Back-n. The electronics is based on PXI… ▽ More Back-n is a white neutron experimental facility at China Spallation Neutron Source (CSNS). The time structure of the primary proton beam make it fully applicable to use TOF (time-of-flight) method for neutron energy measuring. We implement the electronics of TOF measurement on the general-purpose readout electronics designed for all of the seven detectors in Back-n. The electronics is based on PXIe (Peripheral Component Interconnect Express eXtensions for Instrumentation) platform, which is composed of FDM (Field Digitizer Modules), TCM (Trigger and Clock Module), and SCM (Signal Conditioning Module). T0 signal synchronous to the CSNS accelerator represents the neutron emission from the target. It is the start of time stamp. The trigger and clock module (TCM) receives, synchronizes and distributes the T0 signal to each FDM based on the PXIe backplane bus. Meantime, detector signals after being conditioned are fed into FDMs for waveform digitizing. First sample point of the signal is the stop of time stamp. According to the start, stop time stamp and the time of signal over threshold, the total TOF can be obtained. FPGA-based (Field Programmable Gate Array) TDC is implemented on TCM to accurately acquire the time interval between the asynchronous T0 signal and the global synchronous clock phase. There is also an FPGA-based TDC on FDM to accurately acquire the time interval between T0 arriving at FDM and the first sample point of the detector signal, the over threshold time of signal is obtained offline. This method for TOF measurement is efficient and not needed for additional modules. Test result shows the accuracy of TOF is sub-nanosecond and can meet the requirement for Back-n at CSNS. △ Less

Submitted 24 June, 2018; originally announced June 2018.

Comments: 4 pages, 13 figures, 21st IEEE Real Time Conference

T0 Fan-out for Back-n White Neutron Facility at CSNS

Authors: X. Y. Ji, P. Cao, T. Yu, L. K. Xie, X. R. Huang, Q. An, H. Y. Bai, J. Bao, Y. H. Chen, P. J. Cheng, Z. Q. Cui, R. R. Fan, C. Q. Feng, M. H. Gu, Z. J. Han, G. Z. He, Y. C. He, Y. F. He, H. X. Huang, W. L. Huang, X. L. Ji, H. Y. Jiang, W. Jiang, H. Y. Jing, L. Kang , et al. (46 additional authors not shown)

Abstract: the main physics goal for Back-n white neutron facility at China Spallation Neutron Source (CSNS) is to measure nuclear data. The energy of neutrons is one of the most important parameters for measuring nuclear data. Method of time of flight (TOF) is used to obtain the energy of neutrons. The time when proton bunches hit the thick tungsten target is considered as the start point of TOF. T0 signal,… ▽ More the main physics goal for Back-n white neutron facility at China Spallation Neutron Source (CSNS) is to measure nuclear data. The energy of neutrons is one of the most important parameters for measuring nuclear data. Method of time of flight (TOF) is used to obtain the energy of neutrons. The time when proton bunches hit the thick tungsten target is considered as the start point of TOF. T0 signal, generated from the CSNS accelerator, represents this start time. Besides, the T0 signal is also used as the gate control signal that triggers the readout electronics. Obviously, the timing precision of T0 directly affects the measurement precision of TOF and controls the running or readout electronics. In this paper, the T0 fan-out for Back-n white neutron facility at CSNS is proposed. The T0 signal travelling from the CSNS accelerator is fanned out to the two underground experiment stations respectively over long cables. To guarantee the timing precision, T0 signal is conditioned with good signal edge. Furthermore, techniques of signal pre-emphasizing and equalizing are used to improve signal quality after T0 being transmitted over long cables with about 100 m length. Experiments show that the T0 fan-out works well, the T0 signal transmitted over 100 m remains a good time resolution with a standard deviation of 25 ps. It absolutely meets the required accuracy of the measurement of TOF. △ Less

Submitted 24 June, 2018; originally announced June 2018.

Comments: 3 pages, 6 figures, the 21st IEEE Real Time Conference

Plasma-Cascade micro-bunching Amplifier and Coherent electron Cooling of a Hadron Beams

Authors: V. N. Litvinenko, G. Wang, D. Kayran, Y. Jing, J. Ma, I. Pinayev

Abstract: In this paper we describe an instability, which we called a Plasma-Cascade Amplifier, occurring in electron beams propagating along a straight trajectory. In this paper we describe an instability, which we called a Plasma-Cascade Amplifier, occurring in electron beams propagating along a straight trajectory. △ Less

Submitted 23 February, 2018; originally announced February 2018.

The 1223 new periodic orbits of planar three-body problem with unequal mass and zero angular momentum

Authors: Xiaoming Li, Yipeng Jing, Shijun Liao

Abstract: We present 1349 families of Newtonian periodic planar three-body orbits with unequal mass and zero angular momentum and the initial conditions in case of isosceles collinear configurations. These 1349 families of the periodic collisionless orbits can be divided into seven classes according to their geometric and algebraic symmetries. Among these 1349 families, 1223 families are entirely new, to th… ▽ More We present 1349 families of Newtonian periodic planar three-body orbits with unequal mass and zero angular momentum and the initial conditions in case of isosceles collinear configurations. These 1349 families of the periodic collisionless orbits can be divided into seven classes according to their geometric and algebraic symmetries. Among these 1349 families, 1223 families are entirely new, to the best of our knowledge. Furthermore, some periodic orbits have the same free group element for different mass. We find that the scale-invariant average period linearly increases with the mass of one body when the masses of the other two are constant. It is suggested that the masses of bodies may play an important role in periodic three-body systems. The movies of these periodic orbits are given on the website \url{http://numericaltank.sjtu.edu.cn/three-body/three-body-unequal-mass.htm} . △ Less

Submitted 13 September, 2017; originally announced September 2017.

Comments: 84 pages, 3 figures. arXiv admin note: text overlap with arXiv:1705.00527

Journal ref: Publications of the Astronomical Society of Japan (2018), Vol. 70, No. 4, 64

Acoustic Metacages for Omnidirectional Sound Shielding

Authors: Chen Shen, Yangbo Xie, Junfei Li, Steven A. Cummer, Yun Jing

Abstract: Conventional sound shielding structures typically prevent fluid transport between the exterior and interior. A design of a two-dimensional acoustic metacage with subwavelength thickness which can shield acoustic waves from all directions while allowing steady fluid flow is presented in this paper. The structure is designed based on acoustic gradient-index metasurfaces composed of open channels and… ▽ More Conventional sound shielding structures typically prevent fluid transport between the exterior and interior. A design of a two-dimensional acoustic metacage with subwavelength thickness which can shield acoustic waves from all directions while allowing steady fluid flow is presented in this paper. The structure is designed based on acoustic gradient-index metasurfaces composed of open channels and shunted Helmholtz resonators. The strong parallel momentum on the metacage surface rejects in-plane sound at an arbitrary angle of incidence which leads to low sound transmission through the metacage. The performance of the proposed metacage is verified by numerical simulations and measurements on a three-dimensional printed prototype. The acoustic metacage has potential applications in sound insulation where steady fluid flow is necessary or advantageous. △ Less

Submitted 29 August, 2017; originally announced August 2017.

Zone folding induced topological insulators in phononic crystals

Authors: Yuanchen Deng, Hao Ge, Yuan Tian, Minghui Lu, Yun Jing

Abstract: This letter investigates a flow-free, pseudospin-based acoustic topological insulator. Zone folding, a strategy originated from photonic crystal, is used to form double Dirac cones in phononic crystal. The lattice symmetry of the phononic crystal is broken by tuning the size of the center "atom" of the unit cell in order to open the nontrivial topological gap. Robust sound one-way propagation is d… ▽ More This letter investigates a flow-free, pseudospin-based acoustic topological insulator. Zone folding, a strategy originated from photonic crystal, is used to form double Dirac cones in phononic crystal. The lattice symmetry of the phononic crystal is broken by tuning the size of the center "atom" of the unit cell in order to open the nontrivial topological gap. Robust sound one-way propagation is demonstrated both numerically and experimentally. This study provides a flexible approach for realizing acoustic topological insulators, which are promising for applications such as noise control and waveguide design. △ Less

Submitted 18 June, 2017; originally announced June 2017.

Journal ref: Phys. Rev. B 96, 184305 (2017)

Ultra-thin Acoustic Metasurface-Based Schroeder Diffuser

Authors: Yifan Zhu, Xudong Fan, Bin Liang, Jianchun Cheng, Yun Jing

Abstract: Schroeder diffuser is a classical design, proposed over 40 years ago, for artificially creating optimal and predictable sound diffuse reflection. It has been widely adopted in architectural acoustics and it has also shown substantial potential in noise control, ultrasound imaging, microparticle manipulation, among others. The conventional Schroeder diffuser, however, has a considerable thickness o… ▽ More Schroeder diffuser is a classical design, proposed over 40 years ago, for artificially creating optimal and predictable sound diffuse reflection. It has been widely adopted in architectural acoustics and it has also shown substantial potential in noise control, ultrasound imaging, microparticle manipulation, among others. The conventional Schroeder diffuser, however, has a considerable thickness on the order of one wavelength, severely impeding its applications for low frequency sound. In this paper, a new class of ultra-thin and planar Schroeder diffusers are proposed based on the concept of acoustic metasurface. Both numerical and experimental results demonstrate satisfactory sound diffuse reflection produced from the metasurface-based Schroeder diffuser despite it being one order of magnitude thinner than the conventional one. The proposed design not only offer promising building blocks with great potential to profoundly impact architectural acoustics and related fields, but also constitutes a major step towards real-world applications of acoustic metasurfaces. △ Less

Submitted 30 January, 2017; originally announced January 2017.

Comments: 23 pages, 6 figures

Journal ref: Phys. Rev. X 7, 021034 (2017)

Temporally modulated phase retrieval method for weak temporal phase measurement of laser pulses

Authors: Zhi Qiao, Yudong Yao, Xiaochao Wang, Yuanyuan Jing, Wei Fan, Zunqi Lin

Abstract: The measurement of weak temporal phase for picosecond and nanosecond laser pulses is important but quite difficult. We propose a simple iterative algorithm, which is based on a temporally movable phase modulation process, to retrieve the weak temporal phase of laser pulses. This unambiguous method can achieve a high accuracy and simultaneously measure the weak temporal phase and temporal profile o… ▽ More The measurement of weak temporal phase for picosecond and nanosecond laser pulses is important but quite difficult. We propose a simple iterative algorithm, which is based on a temporally movable phase modulation process, to retrieve the weak temporal phase of laser pulses. This unambiguous method can achieve a high accuracy and simultaneously measure the weak temporal phase and temporal profile of pulses, which are almost transform-limited. Detailed analysis shows that this iterative method has valuable potential applications in the characterization of pulses with weak temporal phase. △ Less

Submitted 5 July, 2016; originally announced July 2016.

Loss-induced enhanced transmission in anisotropic density-near-zero acoustic metamaterials

Authors: Chen Shen, Yun Jing

Abstract: Anisotropic density-near-zero (ADNZ) acoustic metamaterials are investigated theoretically and numerically in this letter and are shown to exhibit extraordinary transmission enhancement when material loss is induced. The enhanced transmission is due to the enhanced propagating and evanescent wave modes inside the ADNZ medium thanks to the interplay of near-zero density, material loss, and high wav… ▽ More Anisotropic density-near-zero (ADNZ) acoustic metamaterials are investigated theoretically and numerically in this letter and are shown to exhibit extraordinary transmission enhancement when material loss is induced. The enhanced transmission is due to the enhanced propagating and evanescent wave modes inside the ADNZ medium thanks to the interplay of near-zero density, material loss, and high wave impedance matching in the propagation direction. The equi-frequency contour (EFC) is used to reveal whether the propagating wave mode is allowed in ADNZ metamaterials. Numerical simulations based on plate-type acoustic metamaterials with different material losses were performed to demonstrate collimation enabled by the induced loss in ADNZ media. This work provides a different way for manipulating acoustic waves. △ Less

Submitted 19 April, 2016; originally announced April 2016.

Forward model with space-variant of source size for reconstruction on x-ray radiographic image

Authors: Jin Liu, Jun Liu, Yue-feng Jing, Bo Xiao, Cai-hua Wei, Yong-hong Guan, Xuan Zhang

Abstract: Forward imaging technique is the base of combined method on density reconstruction with the forward calculation and inverse problem solution. In the paper, we introduced the projection equation for the radiographic system with areal source blur and detector blur, gained the projecting matrix from any point source to any detector pixel with x-ray trace technique, proposed the ideal on gridding the… ▽ More Forward imaging technique is the base of combined method on density reconstruction with the forward calculation and inverse problem solution. In the paper, we introduced the projection equation for the radiographic system with areal source blur and detector blur, gained the projecting matrix from any point source to any detector pixel with x-ray trace technique, proposed the ideal on gridding the areal source as many point sources with different weights, and used the blurring window as the effect of the detector blur. We used the forward projection equation to gain the same deviation information about the object edge as the experimental image. Our forward projection equation is combined with Constrained Conjugate Gradient method to form a new method for density reconstruction, XTRACE-CCG. The new method worked on the simulated image of French Test Object and experimental image. The same results have been concluded the affecting range of the blur is decreased and can be controlled to one or two pixels. The method is also suitable for reconstruction of density-variant object. The capability of our method to handle blur effect is useful for all radiographic systems with larger source size comparing to pixel size. △ Less

Submitted 11 January, 2016; originally announced January 2016.

Comments: 12 pages, 9 figures

High-gradient High-charge CW Superconducting RF gun with CsK2Sb photocathode

Authors: Igor Pinayev, Vladimir N. Litvinenko, Joseph Tuozzolo, Jean Clifford Brutus, Sergey Belomestnykh, Chase Boulware, Charles Folz, David Gassner, Terry Grimm, Yue Hao, James Jamilkowski, Yichao Jing, Dmitry Kayran, George Mahler, Michael Mapes, Toby Miller, Geetha Narayan, Brian Sheehy, Triveni Rao, John Skaritka, Kevin Smith, Louis Snydstrup, Yatming Than, Erdong Wang, Gang Wang , et al. (18 additional authors not shown)

Abstract: High-gradient CW photo-injectors operating at high accelerating gradients promise to revolutionize many sciences and applications. They can establish the basis for super-bright monochromatic X-ray free-electron lasers, super-bright hadron beams, nuclear- waste transmutation or a new generation of microchip production. In this letter we report on our operation of a superconducting RF electron gun w… ▽ More High-gradient CW photo-injectors operating at high accelerating gradients promise to revolutionize many sciences and applications. They can establish the basis for super-bright monochromatic X-ray free-electron lasers, super-bright hadron beams, nuclear- waste transmutation or a new generation of microchip production. In this letter we report on our operation of a superconducting RF electron gun with a record-high accelerating gradient at the CsK2Sb photocathode (i.e. ~ 20 MV/m) generating a record-high bunch charge (i.e., 3 nC). We briefly describe the system and then detail our experimental results. This achievement opens new era in generating high-power electron beams with a very high brightness. △ Less

Submitted 17 November, 2015; originally announced November 2015.

Comments: 13 pager, 5 figures

Beam optical design for high energy electron radiography experiment study based on THU LINAC

Authors: Quantang Zhao, Shuchun Cao, Ming Liu, Xiaokang Sheng, Yanru Wang, Yang Zong, Yi Jing, Xiaoming Zhang, Rui Cheng, Yongtao Zhao, Zimin Zhang, Yingchao Du, Wei Gai

Abstract: A special beam line for high energy electron radiography is designed, including achromat and imaging systems. The requirement of the angle and position correction on the target from imaging system can be approximately realized by fine tuning the quadrupoles used in the achromat. The imaging system is designed by fully considering the limitation from the laboratory and beam diagnostics devices spac… ▽ More A special beam line for high energy electron radiography is designed, including achromat and imaging systems. The requirement of the angle and position correction on the target from imaging system can be approximately realized by fine tuning the quadrupoles used in the achromat. The imaging system is designed by fully considering the limitation from the laboratory and beam diagnostics devices space. Two kinds of imaging system are designed and both show a good performance of imaging by beam trajectory simulation. The details of the beam optical requirement and optimization design are presented here. The beam line is designed and prepared to install in Tsinghua university linear electron accelerator laboratory for further precise electron radiography experiment study. △ Less

Submitted 12 October, 2015; originally announced October 2015.

Comments: 8 pages

Broad-band acoustic hyperbolic metamaterial

Authors: Chen Shen, Yangbo Xie, Ni Sui, Wenqi Wang, Steven A. Cummer, Yun Jing

Abstract: Acoustic metamaterials (AMMs) are engineered materials, made from subwavelength structures, that exhibit useful or unusual constitutive properties. There has been intense research interest in AMMs since its first realization in 2000 by Liu et al. A number of functionalities and applications have been proposed and achieved using AMMs. Hyperbolic metamaterials are one of the most important types of… ▽ More Acoustic metamaterials (AMMs) are engineered materials, made from subwavelength structures, that exhibit useful or unusual constitutive properties. There has been intense research interest in AMMs since its first realization in 2000 by Liu et al. A number of functionalities and applications have been proposed and achieved using AMMs. Hyperbolic metamaterials are one of the most important types of metamaterials due to their extreme anisotropy and numerous possible applications, including negative refraction, backward waves, spatial filtering, and subwavelength imaging. Although the importance of acoustic hyperbolic metamaterials (AHMMs) as a tool for achieving full control of acoustic waves is substantial, the realization of a broad-band and truly hyperbolic AMM has not been reported so far. Here, we demonstrate the design and experimental characterization of a broadband AHMM that operates between 1.0 kHz and 2.5 kHz. △ Less

Submitted 2 August, 2015; originally announced August 2015.

Journal ref: Phys. Rev. Lett. 115, 254301 (2015)

Model Independent Description of Amplification and Saturation Using Green's Function

Authors: Yichao Jing, Vladimir N. Litvinenko, Yue Hao, Gang Wang

Abstract: High-gain Free Electron Laser (FEL) is one of the many electron-beam instabilities that have a number of common features linking the shot noise, the amplification and the saturation. In this paper, we present a new, model-independent description of the interplay between these effects. We derive a simple formula for a maximum attainable gain before instability saturates. Application of this model-i… ▽ More High-gain Free Electron Laser (FEL) is one of the many electron-beam instabilities that have a number of common features linking the shot noise, the amplification and the saturation. In this paper, we present a new, model-independent description of the interplay between these effects. We derive a simple formula for a maximum attainable gain before instability saturates. Application of this model-independent formula to FELs is compared with FEL theory and simulations. We apply the limitations resulting from these findings to FEL amplifiers used for seeded FELs and for Coherent electron Cooling. △ Less

Submitted 18 May, 2015; originally announced May 2015.

A fast marching method based back projection algorithm for photoacoustic tomography in heterogeneous media

Authors: Tianren Wang, Yun Jing

Abstract: This paper presents a numerical study on a fast marching method based back projection reconstruction algorithm for photoacoustic tomography in heterogeneous media. Transcranial imaging is used here as a case study. To correct for the phase aberration from the heterogeneity (i.e., skull), the fast marching method is adopted to compute the phase delay based on the known speed of sound distribution,… ▽ More This paper presents a numerical study on a fast marching method based back projection reconstruction algorithm for photoacoustic tomography in heterogeneous media. Transcranial imaging is used here as a case study. To correct for the phase aberration from the heterogeneity (i.e., skull), the fast marching method is adopted to compute the phase delay based on the known speed of sound distribution, and the phase delay is taken into account by the back projection algorithm for more accurate reconstructions. It is shown that the proposed algorithm is more accurate than the conventional back projection algorithm, but slightly less accurate than the time reversal algorithm particularly in the area close to the skull. However, the image reconstruction time for the proposed algorithm can be as little as 124 ms when implemented by a GPU (512 sensors, 21323 pixels reconstructed), which is two orders of magnitude faster than the time reversal reconstruction. The proposed algorithm, therefore, not only corrects for the phase aberration, but can be also potentially implemented in a real-time manner. △ Less

Submitted 19 January, 2015; v1 submitted 15 January, 2015; originally announced January 2015.

eRHIC Design Study: An Electron-Ion Collider at BNL

Authors: E. C. Aschenauer, M. D. Baker, A. Bazilevsky, K. Boyle, S. Belomestnykh, I. Ben-Zvi, S. Brooks, C. Brutus, T. Burton, S. Fazio, A. Fedotov, D. Gassner, Y. Hao, Y. Jing, D. Kayran, A. Kiselev, M. A. C. Lamont, J. -H. Lee, V. N. Litvinenko, C. Liu, T. Ludlam, G. Mahler, G. McIntyre, W. Meng, F. Meot , et al. (22 additional authors not shown)

Abstract: This document presents BNL's plan for an electron-ion collider, eRHIC, a major new research tool that builds on the existing RHIC facility to advance the long-term vision for Nuclear Physics to discover and understand the emergent phenomena of Quantum Chromodynamics (QCD), the fundamental theory of the strong interaction that binds the atomic nucleus. We describe the scientific requirements for su… ▽ More This document presents BNL's plan for an electron-ion collider, eRHIC, a major new research tool that builds on the existing RHIC facility to advance the long-term vision for Nuclear Physics to discover and understand the emergent phenomena of Quantum Chromodynamics (QCD), the fundamental theory of the strong interaction that binds the atomic nucleus. We describe the scientific requirements for such a facility, following up on the community-wide 2012 white paper, 'Electron-Ion Collider: the Next QCD Frontier', and present a design concept that incorporates new, innovative accelerator techniques to provide a cost-effective upgrade of RHIC with polarized electron beams colliding with the full array of RHIC hadron beams. The new facility will deliver electron-nucleon luminosity of 10^33-10^34 cm-1sec-1 for collisions of 15.9 GeV polarized electrons on either 250 GeV polarized protons or 100 GeV/u heavy ion beams. The facility will also be capable of providing an electron beam energy of 21.2 GeV, at reduced luminosity. We discuss the on-going R&D effort to realize the project, and present key detector requirements and design ideas for an experimental program capable of making the 'golden measurements' called for in the EIC White Paper. △ Less

Submitted 18 December, 2014; v1 submitted 4 September, 2014; originally announced September 2014.

Theory of proton coupled electron transfer reactions: Assessing the Born-Oppenheimer approximation for the proton motion using an analytically solvable model

Authors: Renhui Zheng, Yuanyuan Jing, Liping Chen, Qiang Shi

Abstract: By employing an analytically solvable model including the Duschinsky rotation effect, we investigated the applicability of the commonly used Born-Oppenheimer (BO) approximation for separating the proton and proton donor-acceptor motions in theories of proton coupled electron transfer (PCET) reactions. Comparison with theories based on the BO approximation shows that, the BO approximation for the p… ▽ More By employing an analytically solvable model including the Duschinsky rotation effect, we investigated the applicability of the commonly used Born-Oppenheimer (BO) approximation for separating the proton and proton donor-acceptor motions in theories of proton coupled electron transfer (PCET) reactions. Comparison with theories based on the BO approximation shows that, the BO approximation for the proton coordinate is generally valid while some further approximations may become inaccurate in certain range of parameters. We have also investigated the effect of vibrationally coherent tunneling in the case of small reorganization energy, and shown that it plays an important role on the rate constant and kinetic isotope effect. △ Less

Submitted 22 July, 2010; originally announced July 2010.