-
Antiferromagnetic magnon spintronic based on non-reciprocal and non-degenerated ultra-fast spin-waves in the canted antiferromagnet α-Fe2O3
Authors:
A. El Kanj,
O. Gomonay,
I. Boventer,
P. Bortolotti,
V. Cros,
A. Anane,
R. Lebrun
Abstract:
Spin-waves in antiferromagnets hold the prospects for the development of faster, less power-hungry electronics, as well as promising physics based on spin-superfluids and coherent magnon-condensates. For both these perspectives, addressing electrically coherent antiferromagnetic spin-waves is of importance, a prerequisite that has so far been elusive, because unlike ferromagnets,antiferromagnets c…
▽ More
Spin-waves in antiferromagnets hold the prospects for the development of faster, less power-hungry electronics, as well as promising physics based on spin-superfluids and coherent magnon-condensates. For both these perspectives, addressing electrically coherent antiferromagnetic spin-waves is of importance, a prerequisite that has so far been elusive, because unlike ferromagnets,antiferromagnets couple weakly to radiofrequency fields. Here, we demonstrate the detection of ultra-fast non-reciprocal spin-waves in the dipolar-exchange regime of a canted antiferromagnet using both inductive and spintronic transducers. Using time-of-flight spin-wave spectroscopy on hematite (α-Fe2O3), we find that the magnon wave packets can propagate as fast as 20 km/s for reciprocal bulk spin-wave modes and up to 6 km/s for surface-spin waves propagating parallel to the antiferromagnetic Neel vector. We finally achieve efficient electrical detection of non-reciprocal spin-wave transport using non-local inverse spin-Hall effects. The electrical detection of coherent non-reciprocal antiferromagnetic spin waves paves the way for the development of antiferromagnetic and altermagnet-based magnonic devices.
△ Less
Submitted 18 August, 2023; v1 submitted 16 January, 2023;
originally announced January 2023.
-
Ultra-tuning of nonlinear drumhead MEMS resonators by electro-thermoelastic buckling
Authors:
Ali Kanj,
Paolo F. Ferrari,
Arend M. van der Zande,
Alexander F. Vakakis,
Sameh Tawfick
Abstract:
Nonlinear micro-electro-mechanical systems (MEMS) resonators open new opportunities in sensing and signal manipulation compared to their linear counterparts by enabling frequency tuning and increased bandwidth. Here, we design, fabricate and study drumhead resonators exhibiting strongly nonlinear dynamics and develop a reduced order model (ROM) to capture their response accurately. The resonators…
▽ More
Nonlinear micro-electro-mechanical systems (MEMS) resonators open new opportunities in sensing and signal manipulation compared to their linear counterparts by enabling frequency tuning and increased bandwidth. Here, we design, fabricate and study drumhead resonators exhibiting strongly nonlinear dynamics and develop a reduced order model (ROM) to capture their response accurately. The resonators undergo electrostatically-mediated thermoelastic buckling which tunes their natural frequency from 4.7 to 11.3 MHz, a factor of 2.4x tunability. Moreover, the imposed buckling switches the nonlinearity of the resonators between purely stiffening, purely softening, and even softening-to-stiffening. Accessing these exotic dynamics requires precise control of the temperature and the DC electrostatic forces near the resonator's critical-buckling point. To explain the observed tunability, we develop a one-dimensional physics-based ROM that predicts the linear and nonlinear response of the fundamental bending mode of these drumhead resonators. The ROM captures the dynamic effects of the internal stresses resulting from three sources: The residual stresses from the fabrication process, the mismatch in thermal expansion between the constituent layers, and lastly, the applied electrostatic forces. The ROM replicates the observed tunability of linear (within 5.5% error) and nonlinear responses even near the states of critical buckling. These remarkable nonlinear and large tunability of the natural frequency are valuable features for on-chip acoustic devices in broad applications such as signal manipulation, filtering, and MEMS waveguides.
△ Less
Submitted 10 October, 2022;
originally announced October 2022.
-
Self Sustained Thermally Induced Gas-Damped Oscillations of Bimetal Cantilevers with Application to the Design of a New Pyroelectric Micro Energy Harvester
Authors:
Tarek Gebrael,
Ali Kanj,
Daniel Farhat,
Mutasem Shehadeh,
Issam Lakkis
Abstract:
Low efficiency is the main drawback of many MEMS thermal energy harvesters. Recently, energy harvesting micro-devices that operate using the pyroelectric effect gained attention due to their potential superior performance. Operation of these devices is based on the cyclic motion of a pyroelectric capacitor that operates between a high temperature and a low temperature reservoirs. In this paper, we…
▽ More
Low efficiency is the main drawback of many MEMS thermal energy harvesters. Recently, energy harvesting micro-devices that operate using the pyroelectric effect gained attention due to their potential superior performance. Operation of these devices is based on the cyclic motion of a pyroelectric capacitor that operates between a high temperature and a low temperature reservoirs. In this paper, we investigate the dynamics of oscillations of a pyroelectric capacitor self sustained by thermally actuated bimetal micro-cantilevers, a topic which is so far under investigated. In addition to highlighting key thermodynamic aspects of the operation, we explore conditions for self-sustained oscillations and discuss the viability of operation at the mechanical resonance frequency. The analysis is presented for a new design inspired by the device proposed in Refs.\cite{2011,2012}, where in contrast, our proposed design boasts the following features: The pyroelectric capacitor remains parallel to the heat reservoirs, by virtue of its symmetric support by two bimetallic cantilever beams; In addition, the cyclic operation of the device does not require physical contact, thus lowering the risk of mechanical failure; To adjust the damping force imparted by the surrounding gas, the thermal reservoirs are equipped with trenches. To study the dynamic operation of the device, we developed a physically based reduced order, yet accurate, model that accounts for the heat transfer between and within the different components, and for the various forces including the gas damping force. The model is embedded within an optimization algorithm to produce optimal designs over the range 26-38 C of temperature difference between the two reservoirs. The corresponding range of harvested power density is 0.4-0.65 mW/cm2.
△ Less
Submitted 12 November, 2019;
originally announced November 2019.
-
Frequency and time transfer for metrology and beyond using telecommunication network fibres
Authors:
Olivier Lopez,
Fabien Kéfélian,
Haifeng Jiang,
Adil Haboucha,
Anthony Bercy,
Fabio Stefani,
Bruno Chanteau,
Amale Kanj,
Daniele Rovera,
Joseph Achkar,
Christian Chardonnet,
Paul-Eric Pottie,
Anne Amy-Klein,
Giorgio Santarelli
Abstract:
The distribution and the comparison of an ultra-stable optical frequency and accurate time using optical fibres have been greatly improved in the last ten years. The frequency stability and accuracy of optical links surpass well-established methods using the global navigation satellite system and geostationary satellites. In this paper, we present a review of the methods and the results obtained.…
▽ More
The distribution and the comparison of an ultra-stable optical frequency and accurate time using optical fibres have been greatly improved in the last ten years. The frequency stability and accuracy of optical links surpass well-established methods using the global navigation satellite system and geostationary satellites. In this paper, we present a review of the methods and the results obtained. We show that public telecommunication network carrying Internet data can be used to compare and distribute ultra-stable metrological signals over long distances. This novel technique paves the way for the deployment of a national and continental ultra-stable metrological optical network.
△ Less
Submitted 15 July, 2015;
originally announced July 2015.
-
Simultaneous remote transfer of accurate timing and optical frequency over a public fiber network
Authors:
Olivier Lopez,
Amale Kanj,
Paul-Eric Pottie,
Giovanni D. Rovera,
Joseph Achkar,
Christian Chardonnet,
Anne Amy-Klein,
Giorgio Santarelli
Abstract:
In this work we demonstrate for the first time that it is possible to transfer simultaneously an ultra-stable optical frequency and a precise and accurate timing over 540 km using a public telecommunication optical fiber networks with Internet data. The optical phase is used to carry both the frequency information and the timestamps by modulating a very narrow optical carrier at 1.55 $μ$m with spr…
▽ More
In this work we demonstrate for the first time that it is possible to transfer simultaneously an ultra-stable optical frequency and a precise and accurate timing over 540 km using a public telecommunication optical fiber networks with Internet data. The optical phase is used to carry both the frequency information and the timestamps by modulating a very narrow optical carrier at 1.55 $μ$m with spread spectrum signals using two-way satellite time transfer modems. The results in term of absolute time accuracy (250 ps) and long-term timing stability (20 ps) well outperform the conventional Global Navigation Satellite System or geostationary transfer methods.
△ Less
Submitted 4 October, 2012; v1 submitted 21 September, 2012;
originally announced September 2012.