-
Optimal Design of Validation Experiments for the Prediction of Quantities of Interest
Authors:
Antonin Paquette-Rufiange,
Serge Prudhomme,
Marc Laforest
Abstract:
Numerical predictions of quantities of interest measured within physical systems rely on the use of mathematical models that should be validated, or at best, not invalidated. Model validation usually involves the comparison of experimental data (outputs from the system of interest) and model predictions, both obtained at a specific validation scenario. The design of this validation experiment shou…
▽ More
Numerical predictions of quantities of interest measured within physical systems rely on the use of mathematical models that should be validated, or at best, not invalidated. Model validation usually involves the comparison of experimental data (outputs from the system of interest) and model predictions, both obtained at a specific validation scenario. The design of this validation experiment should be directly relevant to the objective of the model, that of predicting a quantity of interest at a prediction scenario. In this paper, we address two specific issues arising when designing validation experiments. The first issue consists in determining an appropriate validation scenario in cases where the prediction scenario cannot be carried out in a controlled environment. The second issue concerns the selection of observations when the quantity of interest cannot be readily observed. The proposed methodology involves the computation of influence matrices that characterize the response surface of given model functionals. Minimization of the distance between influence matrices allow one for selecting a validation experiment most representative of the prediction scenario. We illustrate our approach on two numerical examples. The first example considers the validation of a simple model based on an ordinary differential equation governing an object in free fall to put in evidence the importance of the choice of the validation experiment. The second numerical experiment focuses on the transport of a pollutant and demonstrates the impact that the choice of the quantity of interest has on the validation experiment to be performed.
△ Less
Submitted 10 March, 2023;
originally announced March 2023.
-
Hyperbolic Basis Functions for Time-Transient Analysis of Eddy Currents in Conductive and Magnetic Thin Sheets
Authors:
Bruno de Sousa Alves,
Ruth V. Sabariego,
Marc Laforest,
Frédéric Sirois
Abstract:
This paper presents a new time-domain finite-element approach for modelling thin sheets with hyperbolic basis functions derived from the well-known steady-state solution of the linear flux diffusion equation. The combination of solutions at different operating frequencies permits the representation of the time-evolution of field quantities in the magnetic field formulation. This approach is here a…
▽ More
This paper presents a new time-domain finite-element approach for modelling thin sheets with hyperbolic basis functions derived from the well-known steady-state solution of the linear flux diffusion equation. The combination of solutions at different operating frequencies permits the representation of the time-evolution of field quantities in the magnetic field formulation. This approach is here applied to solve a planar shielding problem in harmonic and time-dependent simulations for materials with either linear or nonlinear characteristics. Local and global quantities show good agreement with the reference solutions obtained by the standard finite element method on a complete and representative discretization of the region exposed to a time-varying magnetic field.
△ Less
Submitted 13 August, 2021;
originally announced August 2021.
-
Thin-Shell Approach for Modeling Superconducting Tapes in the $H$-$φ$ Finite-Element Formulation
Authors:
Bruno de Sousa Alves,
Valtteri Lahtinen,
Marc Laforest,
Frédéric Sirois
Abstract:
This paper presents a novel finite-element approach for the electromagnetic modeling of superconducting coated conductors. We combine a thin-shell (TS) method to the $H$-$φ$ formulation to avoid the meshing difficulties related to the high aspect ratio of these conductors and reduce the computational burden in simulations. The interface boundary conditions in the TS method are defined using an aux…
▽ More
This paper presents a novel finite-element approach for the electromagnetic modeling of superconducting coated conductors. We combine a thin-shell (TS) method to the $H$-$φ$ formulation to avoid the meshing difficulties related to the high aspect ratio of these conductors and reduce the computational burden in simulations. The interface boundary conditions in the TS method are defined using an auxiliary 1-D finite-element (FE) discretization of $N$ elements along the thinnest dimension of the conductor. This procedure permits the approximation of the superconductor's nonlinearities inside the TS in a time-transient analysis. Four application examples of increasing complexity are discussed: (i) single coated conductor, (ii) two closely packed conductors carrying anti-parallel currents, (iii) a stack of twenty superconducting tapes and a (iv) full representation of a HTS tape comprising a stack of thin films. In all these examples, the profiles of both the tangential and normal components of the magnetic field show good agreement with a reference solution obtained with standard $2$-D $H$-$φ$ formulation. Results are also compared with the widely used $T$-$A$ formulation. This formulation is shown to be dual to the TS model with a single FE ($N=1$) in the auxiliary 1-D systems. The increase of $N$ in the TS model is shown to be advantageous at small inter-tape separation and low transport current since it allows the tangential components of the magnetic field to penetrate the thin region. The reduction in computational cost without compromising accuracy makes the proposed model promising for the simulation of large-scale superconducting applications.
△ Less
Submitted 10 December, 2021; v1 submitted 19 August, 2021;
originally announced August 2021.
-
Building a Quantum Engineering Undergraduate Program
Authors:
Abraham Asfaw,
Alexandre Blais,
Kenneth R. Brown,
Jonathan Candelaria,
Christopher Cantwell,
Lincoln D. Carr,
Joshua Combes,
Dripto M. Debroy,
John M. Donohue,
Sophia E. Economou,
Emily Edwards,
Michael F. J. Fox,
Steven M. Girvin,
Alan Ho,
Hilary M. Hurst,
Zubin Jacob,
Blake R. Johnson,
Ezekiel Johnston-Halperin,
Robert Joynt,
Eliot Kapit,
Judith Klein-Seetharaman,
Martin Laforest,
H. J. Lewandowski,
Theresa W. Lynn,
Corey Rae H. McRae
, et al. (12 additional authors not shown)
Abstract:
The rapidly growing quantum information science and engineering (QISE) industry will require both quantum-aware and quantum-proficient engineers at the bachelor's level. We provide a roadmap for building a quantum engineering education program to satisfy this need. For quantum-aware engineers, we describe how to design a first quantum engineering course accessible to all STEM students. For the edu…
▽ More
The rapidly growing quantum information science and engineering (QISE) industry will require both quantum-aware and quantum-proficient engineers at the bachelor's level. We provide a roadmap for building a quantum engineering education program to satisfy this need. For quantum-aware engineers, we describe how to design a first quantum engineering course accessible to all STEM students. For the education and training of quantum-proficient engineers, we detail both a quantum engineering minor accessible to all STEM majors, and a quantum track directly integrated into individual engineering majors. We propose that such programs typically require only three or four newly developed courses that complement existing engineering and science classes available on most larger campuses. We describe a conceptual quantum information science course for implementation at any post-secondary institution, including community colleges and military schools. QISE presents extraordinary opportunities to work towards rectifying issues of inclusivity and equity that continue to be pervasive within engineering. We present a plan to do so and describe how quantum engineering education presents an excellent set of education research opportunities. Finally, we outline a hands-on training plan on quantum hardware, a key component of any quantum engineering program, with a variety of technologies including optics, atoms and ions, cryogenic and solid-state technologies, nanofabrication, and control and readout electronics. Our recommendations provide a flexible framework that can be tailored for academic institutions ranging from teaching and undergraduate-focused two- and four-year colleges to research-intensive universities.
△ Less
Submitted 3 August, 2021;
originally announced August 2021.