-
Speed of sound in methane under conditions of planetary interiors
Authors:
Thomas G. White,
Hannah Poole,
Emma E. McBride,
Matthew Oliver,
Adrien Descamps,
Luke B. Fletcher,
W. Alex Angermeier,
Cameron H. Allen,
Karen Appel,
Florian P. Condamine,
Chandra B. Curry,
Francesco Dallari,
Stefan Funk,
Eric Galtier,
Eliseo J. Gamboa,
Maxence Gauthier,
Peter Graham,
Sebastian Goede,
Daniel Haden,
Jongjin B. Kim,
Hae Ja Lee,
Benjamin K. Ofori-Okai,
Scott Richardson,
Alex Rigby,
Christopher Schoenwaelder
, et al. (10 additional authors not shown)
Abstract:
We present direct observations of acoustic waves in warm dense matter. We analyze wave-number- and energy-resolved x-ray spectra taken from warm dense methane created by laser heating a cryogenic liquid jet. X-ray diffraction and inelastic free-electron scattering yield sample conditions of 0.3$\pm$0.1 eV and 0.8$\pm$0.1 g/cm$^3$, corresponding to a pressure of $\sim$13 GPa. Inelastic x-ray scatte…
▽ More
We present direct observations of acoustic waves in warm dense matter. We analyze wave-number- and energy-resolved x-ray spectra taken from warm dense methane created by laser heating a cryogenic liquid jet. X-ray diffraction and inelastic free-electron scattering yield sample conditions of 0.3$\pm$0.1 eV and 0.8$\pm$0.1 g/cm$^3$, corresponding to a pressure of $\sim$13 GPa. Inelastic x-ray scattering was used to observe the collective oscillations of the ions. With a highly improved energy resolution of $\sim$50 meV, we could clearly distinguish the Brillouin peaks from the quasielastic Rayleigh feature. Data at different wave numbers were utilized to derive a sound speed of 5.9$\pm$0.5 km/s, marking a high-temperature data point for methane and demonstrating consistency with Birch's law in this parameter regime.
△ Less
Submitted 3 May, 2024; v1 submitted 13 November, 2023;
originally announced November 2023.
-
An electron-beam based Compton scattering x-ray source for probing high-energy-density physics
Authors:
H. G. Rinderknecht,
G. Bruhaug,
V. Muşat,
G. Gregori,
H. Poole,
G. W. Collins
Abstract:
The physics basis for an electron-beam based Compton scattering (ECOS) x-ray source is investigated for single-shot experiments at major high energy density facilities such as the Omega Laser Facility, National Ignition Facility, and Z pulsed power facility. A source of monoenergetic ($δε/ε< 5\%$) 10- to 50-keV x rays can be produced by scattering of a short-pulse optical laser by a 23- to 53-MeV…
▽ More
The physics basis for an electron-beam based Compton scattering (ECOS) x-ray source is investigated for single-shot experiments at major high energy density facilities such as the Omega Laser Facility, National Ignition Facility, and Z pulsed power facility. A source of monoenergetic ($δε/ε< 5\%$) 10- to 50-keV x rays can be produced by scattering of a short-pulse optical laser by a 23- to 53-MeV electron beam and collimating the scattered photons. The number and spectrum of scattered photons is calculated as a function of electron packet charge, electron and laser pulse duration, laser intensity, and collision geometry. A source with greater than 10$^{10}$ photons in a 1-mm radius spot at the OMEGA target chamber center and 100-ps time resolution is plausible with the available electron gun and laser technology. Design requirements for diffraction, inelastic scattering and imaging experiments as well as opportunities for improved performance are discussed.
△ Less
Submitted 10 February, 2023; v1 submitted 4 July, 2022;
originally announced July 2022.
-
A feasibility study of using X-ray Thomson Scattering to diagnose the in-flight plasma conditions of DT cryogenic implosions
Authors:
H. Poole,
D. Cao,
R. Epstein,
I. Golovkin,
T. Walton,
S. X. Hu,
M. Kasim,
S. M. Vinko,
J. R. Rygg,
V. N. Goncharov,
G. Gregori,
S. P. Regan
Abstract:
The design of inertial confinement fusion (ICF) ignition targets requires radiation-hydrodynamics simulations with accurate models of the fundamental material properties (i.e., equation of state, opacity, and conductivity). Validation of these models are required via experimentation. A feasibility study of using spatially-integrated, spectrally-resolved, X-ray Thomson scattering (XRTS) measurement…
▽ More
The design of inertial confinement fusion (ICF) ignition targets requires radiation-hydrodynamics simulations with accurate models of the fundamental material properties (i.e., equation of state, opacity, and conductivity). Validation of these models are required via experimentation. A feasibility study of using spatially-integrated, spectrally-resolved, X-ray Thomson scattering (XRTS) measurements to diagnose the temperature, density, and ionization of the compressed DT shell and hot spot of a laser direct-drive implosion at two-thirds convergence was conducted. Synthetic scattering spectra were generated using 1-D implosion simulations from the LILAC code that were post processed with the X-ray Scattering (XRS) model which is incorporated within SPECT3D. Analysis of two extreme adiabat capsule conditions showed that the plasma conditions for both compressed DT shells could be resolved.
△ Less
Submitted 27 October, 2021;
originally announced October 2021.
-
Strong suppression of heat conduction in a laboratory replica of galaxy-cluster turbulent plasmas
Authors:
J. Meinecke,
P. Tzeferacos,
J. S. Ross,
A. F. A. Bott,
S. Feister,
H. -S. Park,
A. R. Bell,
R. Blandford,
R. L. Berger,
R. Bingham,
A. Casner,
L. E. Chen,
J. Foster,
D. H. Froula,
C. Goyon,
D. Kalantar,
M. Koenig,
B. Lahmann,
C. -K. Li,
Y. Lu,
C. A. J. Palmer,
R. Petrasso,
H. Poole,
B. Remington,
B. Reville
, et al. (10 additional authors not shown)
Abstract:
Galaxy clusters are filled with hot, diffuse X-ray emitting plasma, with a stochastically tangled magnetic field whose energy is close to equipartition with the energy of the turbulent motions \cite{zweibel1997, Vacca}. In the cluster cores, the temperatures remain anomalously high compared to what might be expected considering that the radiative cooling time is short relative to the Hubble time \…
▽ More
Galaxy clusters are filled with hot, diffuse X-ray emitting plasma, with a stochastically tangled magnetic field whose energy is close to equipartition with the energy of the turbulent motions \cite{zweibel1997, Vacca}. In the cluster cores, the temperatures remain anomalously high compared to what might be expected considering that the radiative cooling time is short relative to the Hubble time \cite{cowie1977,fabian1994}. While feedback from the central active galactic nuclei (AGN) \cite{fabian2012,birzan2012,churazov2000} is believed to provide most of the heating, there has been a long debate as to whether conduction of heat from the bulk to the core can help the core to reach the observed temperatures \cite{narayan2001,ruszkowski2002,kunz2011}, given the presence of tangled magnetic fields. Interestingly, evidence of very sharp temperature gradients in structures like cold fronts implies a high degree of suppression of thermal conduction \cite{markevitch2007}. To address the problem of thermal conduction in a magnetized and turbulent plasma, we have created a replica of such a system in a laser laboratory experiment. Our data show a reduction of local heat transport by two orders of magnitude or more, leading to strong temperature variations on small spatial scales, as is seen in cluster plasmas \cite{markevitch2003}.
△ Less
Submitted 18 May, 2021;
originally announced May 2021.
-
Surface tension of supercooled water nanodroplets from computer simulations
Authors:
Shahrazad M. A. Malek,
Peter H. Poole,
Ivan Saika-Voivod
Abstract:
We estimate the liquid-vapour surface tension from simulations of TIP4P/2005 water nanodroplets of size $N$=100 to 2880 molecules over a temperature $T$ range of 180 K to 300 K. We compute the planar surface tension $γ_p$, the curvature-dependent surface tension $γ_s$, and the Tolman length $δ$, via two approaches, one based on the pressure tensor (the "mechanical route") and the other on the Lapl…
▽ More
We estimate the liquid-vapour surface tension from simulations of TIP4P/2005 water nanodroplets of size $N$=100 to 2880 molecules over a temperature $T$ range of 180 K to 300 K. We compute the planar surface tension $γ_p$, the curvature-dependent surface tension $γ_s$, and the Tolman length $δ$, via two approaches, one based on the pressure tensor (the "mechanical route") and the other on the Laplace pressure (the "thermodynamic route"). We find that these two routes give different results for $γ_p$, $γ_s$ and $δ$, although in all cases we find that $δ\ge 0$ and is independent of $T$. Nonetheless, the $T$ dependence of $γ_p$ is consistent between the two routes and with that of Vega and de Miguel [J. Chem. Phys. 126, 154707 (2007)] down to the crossing of the Widom line at 230 K for ambient pressure. Below 230 K, $γ_p$ rises more rapidly on cooling than predicted from behavior for $T\ge 300$ K. We show that the increase in $γ_p$ at low $T$ is correlated to the emergence of a well-structured random tetrahedral network in our nanodroplet cores, and thus that the surface tension can be used as a probe to detect behavior associated with the proposed liquid-liquid phase transition in supercooled water.
△ Less
Submitted 31 May, 2019;
originally announced May 2019.
-
Two-state thermodynamics of the ST2 model for supercooled water
Authors:
Vincent Holten,
Jeremy C. Palmer,
Peter H. Poole,
Pablo G. Debenedetti,
Mikhail A. Anisimov
Abstract:
Thermodynamic properties of the ST2 model for supercooled liquid water exhibit anomalies similar to those observed in real water. A possible explanation of these anomalies is the existence of a metastable, liquid-liquid transition terminated by a critical point. This phenomenon, whose possible existence in real water is the subject of much current experimental work, has been unambiguously demonstr…
▽ More
Thermodynamic properties of the ST2 model for supercooled liquid water exhibit anomalies similar to those observed in real water. A possible explanation of these anomalies is the existence of a metastable, liquid-liquid transition terminated by a critical point. This phenomenon, whose possible existence in real water is the subject of much current experimental work, has been unambiguously demonstrated for this particular model by most recent simulations. In this work, we reproduce the anomalies of two versions of the ST2 model with an equation of state describing water as a non-ideal "mixture" of two different types of local molecular order. We show that the liquid-liquid transition in the ST2 water is energy-driven. This is in contrast to another popular model, mW, in which non-ideality in mixing of two alternative local molecular orders is entropy-driven, and is not sufficiently strong to induce a liquid-liquid transition.
△ Less
Submitted 17 February, 2014; v1 submitted 17 December, 2013;
originally announced December 2013.
-
Recent RHIC in-situ coating technology developments
Authors:
A. Hershcovitch,
M. Blaskiewicz,
J. M. Brennan,
A. Chawla,
W. Fischer,
C-J Liaw,
W. Meng,
R. Todd,
A. Custer,
M. Erickson,
N. Jamshidi,
P. Kobrin,
R. Laping,
H. J. Poole,
J. M. Jimenez,
H. Neupert,
M. Taborelli,
C. Yin-Vallgren,
N. Sochugov
Abstract:
To rectify the problems of electron clouds observed in RHIC and unacceptable ohmic heating for superconducting magnets that can limit future machine upgrades, we started developing a robotic plasma deposition technique for $in-situ$ coating of the RHIC 316LN stainless steel cold bore tubes based on staged magnetrons mounted on a mobile mole for deposition of Cu followed by amorphous carbon (a-C) c…
▽ More
To rectify the problems of electron clouds observed in RHIC and unacceptable ohmic heating for superconducting magnets that can limit future machine upgrades, we started developing a robotic plasma deposition technique for $in-situ$ coating of the RHIC 316LN stainless steel cold bore tubes based on staged magnetrons mounted on a mobile mole for deposition of Cu followed by amorphous carbon (a-C) coating. The Cu coating reduces wall resistivity, while a-C has low SEY that suppresses electron cloud formation. Recent RF resistivity computations indicate that 10 μm of Cu coating thickness is needed. But, Cu coatings thicker than 2 μm can have grain structures that might have lower SEY like gold black. A 15-cm Cu cathode magnetron was designed and fabricated, after which, 30 cm long samples of RHIC cold bore tubes were coated with various OFHC copper thicknesses; room temperature RF resistivity measured. Rectangular stainless steel and SS discs were Cu coated. SEY of rectangular samples were measured at room; and, SEY of a disc sample was measured at cryogenic temperatures.
△ Less
Submitted 1 August, 2013;
originally announced August 2013.
