-
Development of MMC-based lithium molybdate cryogenic calorimeters for AMoRE-II
Authors:
A. Agrawal,
V. V. Alenkov,
P. Aryal,
H. Bae,
J. Beyer,
B. Bhandari,
R. S. Boiko,
K. Boonin,
O. Buzanov,
C. R. Byeon,
N. Chanthima,
M. K. Cheoun,
J. S. Choe,
S. Choi,
S. Choudhury,
J. S. Chung,
F. A. Danevich,
M. Djamal,
D. Drung,
C. Enss,
A. Fleischmann,
A. M. Gangapshev,
L. Gastaldo,
Y. M. Gavrilyuk,
A. M. Gezhaev
, et al. (84 additional authors not shown)
Abstract:
The AMoRE collaboration searches for neutrinoless double beta decay of $^{100}$Mo using molybdate scintillating crystals via low temperature thermal calorimetric detection. The early phases of the experiment, AMoRE-pilot and AMoRE-I, have demonstrated competitive discovery potential. Presently, the AMoRE-II experiment, featuring a large detector array with about 90 kg of $^{100}$Mo isotope, is und…
▽ More
The AMoRE collaboration searches for neutrinoless double beta decay of $^{100}$Mo using molybdate scintillating crystals via low temperature thermal calorimetric detection. The early phases of the experiment, AMoRE-pilot and AMoRE-I, have demonstrated competitive discovery potential. Presently, the AMoRE-II experiment, featuring a large detector array with about 90 kg of $^{100}$Mo isotope, is under construction.This paper discusses the baseline design and characterization of the lithium molybdate cryogenic calorimeters to be used in the AMoRE-II detector modules. The results from prototype setups that incorporate new housing structures and two different crystal masses (316 g and 517 - 521 g), operated at 10 mK temperature, show energy resolutions (FWHM) of 7.55 - 8.82 keV at the 2.615 MeV $^{208}$Tl $γ$ line, and effective light detection of 0.79 - 0.96 keV/MeV. The simultaneous heat and light detection enables clear separation of alpha particles with a discrimination power of 12.37 - 19.50 at the energy region around $^6$Li(n, $α$)$^3$H with Q-value = 4.785 MeV. Promising detector performances were demonstrated at temperatures as high as 30 mK, which relaxes the temperature constraints for operating the large AMoRE-II array.
△ Less
Submitted 16 July, 2024;
originally announced July 2024.
-
Projected background and sensitivity of AMoRE-II
Authors:
A. Agrawal,
V. V. Alenkov,
P. Aryal,
J. Beyer,
B. Bhandari,
R. S. Boiko,
K. Boonin,
O. Buzanov,
C. R. Byeon,
N. Chanthima,
M. K. Cheoun,
J. S. Choe,
Seonho Choi,
S. Choudhury,
J. S. Chung,
F. A. Danevich,
M. Djamal,
D. Drung,
C. Enss,
A. Fleischmann,
A. M. Gangapshev,
L. Gastaldo,
Y. M. Gavrilyuk,
A. M. Gezhaev,
O. Gileva
, et al. (81 additional authors not shown)
Abstract:
AMoRE-II aims to search for neutrinoless double beta decay with an array of 423 Li$_2$$^{100}$MoO$_4$ crystals operating in the cryogenic system as the main phase of the Advanced Molybdenum-based Rare process Experiment (AMoRE). AMoRE has been planned to operate in three phases: AMoRE-pilot, AMoRE-I, and AMoRE-II. AMoRE-II is currently being installed at the Yemi Underground Laboratory, located ap…
▽ More
AMoRE-II aims to search for neutrinoless double beta decay with an array of 423 Li$_2$$^{100}$MoO$_4$ crystals operating in the cryogenic system as the main phase of the Advanced Molybdenum-based Rare process Experiment (AMoRE). AMoRE has been planned to operate in three phases: AMoRE-pilot, AMoRE-I, and AMoRE-II. AMoRE-II is currently being installed at the Yemi Underground Laboratory, located approximately 1000 meters deep in Jeongseon, Korea. The goal of AMoRE-II is to reach up to $T^{0νββ}_{1/2}$ $\sim$ 6 $\times$ 10$^{26}$ years, corresponding to an effective Majorana mass of 15 - 29 meV, covering all the inverted mass hierarchy regions. To achieve this, the background level of the experimental configurations and possible background sources of gamma and beta events should be well understood. We have intensively performed Monte Carlo simulations using the GEANT4 toolkit in all the experimental configurations with potential sources. We report the estimated background level that meets the 10$^{-4}$counts/(keV$\cdot$kg$\cdot$yr) requirement for AMoRE-II in the region of interest (ROI) and show the projected half-life sensitivity based on the simulation study.
△ Less
Submitted 13 June, 2024;
originally announced June 2024.
-
Identifying Extreme Events in the Stock Market: A Topological Data Analysis
Authors:
Anish Rai,
Buddha Nath Sharma,
Salam Rabindrajit Luwang,
Md. Nurujjaman,
Sushovan Majhi
Abstract:
This paper employs Topological Data Analysis (TDA) to detect extreme events (EEs) in the stock market at a continental level. Previous approaches, which analyzed stock indices separately, could not detect EEs for multiple time series in one go. TDA provides a robust framework for such analysis and identifies the EEs during the crashes for different indices. The TDA analysis shows that $L^1$,…
▽ More
This paper employs Topological Data Analysis (TDA) to detect extreme events (EEs) in the stock market at a continental level. Previous approaches, which analyzed stock indices separately, could not detect EEs for multiple time series in one go. TDA provides a robust framework for such analysis and identifies the EEs during the crashes for different indices. The TDA analysis shows that $L^1$, $L^2$ norms and Wasserstein distance ($W_D$) of the world leading indices rise abruptly during the crashes, surpassing a threshold of $μ+4*σ$ where $μ$ and $σ$ are the mean and the standard deviation of norm or $W_D$, respectively. Our study identified the stock index crashes of the 2008 financial crisis and the COVID-19 pandemic across continents as EEs. Given that different sectors in an index behave differently, a sector-wise analysis was conducted during the COVID-19 pandemic for the Indian stock market. The sector-wise results show that after the occurrence of EE, we have observed strong crashes surpassing $μ+2*σ$ for an extended period for the banking sector. While for the pharmaceutical sector, no significant spikes were noted. Hence, TDA also proves successful in identifying the duration of shocks after the occurrence of EEs. This also indicates that the Banking sector continued to face stress and remained volatile even after the crash. This study gives us the applicability of TDA as a powerful analytical tool to study EEs in various fields.
△ Less
Submitted 25 May, 2024;
originally announced May 2024.
-
Volkov solutions for relativistic magnetized plasma in strong field quantum electrodynamics regime
Authors:
B. S. Sharma,
Garima Yadav,
R. C. Dhabhai,
N. K. Jaiman
Abstract:
This study shows the dynamics of relativistic electrons in terms of Dirac equation solutions when an ultra-intense short laser pulse of intensity $\ge 10^{23} {W.cm^{-2}}$ propagates through magnetized dense plasma ($B_0\approx {1MG})$. The interaction dynamics is analyzed near the strong-field quantum electrodynamics (SF-QED) regime. Our study finds new solutions in plasma media considering the e…
▽ More
This study shows the dynamics of relativistic electrons in terms of Dirac equation solutions when an ultra-intense short laser pulse of intensity $\ge 10^{23} {W.cm^{-2}}$ propagates through magnetized dense plasma ($B_0\approx {1MG})$. The interaction dynamics is analyzed near the strong-field quantum electrodynamics (SF-QED) regime. Our study finds new solutions in plasma media considering the effects of the re-normalized mass of relativistic electrons and the nonzero effective mass of accelerated photons. We have provided a general method for constructing exact solutions of the Dirac relativistic equation that correctly explains the dynamics of electrons in the strongly magnetized plasma medium. The modified solutions of the Dirac equation for one electron are derived and compared to the Volkov solutions. The new solutions are a basis for a feasible explanation of quantum attributes of relativistic electrons in a strong electromagnetic field of very short ultra-intense laser pulses with intensity near Schwinger field intensity. The solutions are called new Volkov solutions in a plasma medium. These solutions can be used to understand better the theory of quantum radiation reaction for the next-generation laser-plasma accelerator. Our results show that the Volkov solutions are not applicable in a magnetized plasma medium
△ Less
Submitted 1 December, 2023;
originally announced December 2023.
-
Interaction of in-plane waves with a structured penetrable line defect in an elastic lattice
Authors:
M. J. Nieves,
B. L. Sharma
Abstract:
We consider the scattering of in-plane waves that interact with an edge of a structured {penetrable (inertial)} line defect contained in a triangular lattice, composed of periodically placed masses interconnected by massless elastic rods. The steady state problem for time-harmonic excitation is converted into a vector Wiener-Hopf equation using Fourier transform. The matrix Wiener-Hopf kernel of t…
▽ More
We consider the scattering of in-plane waves that interact with an edge of a structured {penetrable (inertial)} line defect contained in a triangular lattice, composed of periodically placed masses interconnected by massless elastic rods. The steady state problem for time-harmonic excitation is converted into a vector Wiener-Hopf equation using Fourier transform. The matrix Wiener-Hopf kernel of this equation describes all dynamic phenomena engaged in the scattering process, which includes instances where localised interfacial waves can emerge along structured defect. This information is exploited to identify the dependency of the existence of these waves on the incident wave parameters and properties of the inertial defect. The symmetry in the structure of scattering medium allows us to convert the vectorial problem into a pair of scalar Wiener-Hopf equations posed along the lattice row containing the defect. The solution embodies the exact representation of scattered field, in terms of a contour integral in the complex plane, that includes the contributions of evanescent and propagating waves. The solution reveals that in the remote lattice, the reflected and transmitted components of incident field are {accompanied by dynamic modes from three distinct symmetry classes in addition to localised interfacial waves}. These classes correspond to tensile modes acting transverse to the defected lattice row, shear modes that act parallel to this row, and wave modes represented as a mixture of these two responses. Benchmark finite element calculations are provided to validate results against the obtained semi-analytical solution, which involve numerical computations of the contour integrals. Graphical illustrations demonstrate special dynamic responses encountered during the wave scattering process, including dynamic anisotropy, negative reflection and negative refraction.
△ Less
Submitted 22 December, 2023; v1 submitted 17 September, 2023;
originally announced September 2023.
-
Scattering of surface waves by inhomogeneities in crystalline structures
Authors:
Basant Lal Sharma
Abstract:
In current scientific and technological scenario, studies of transmittance of surface waves across structured interfaces have gained some wind amidst applications to metasurfaces, electronic edge-waves, crystal grain boundaries, etc. The results presented in the present article shed a light on the influence of material inhomogeneities on propagation of surface waves. Within the framework of classi…
▽ More
In current scientific and technological scenario, studies of transmittance of surface waves across structured interfaces have gained some wind amidst applications to metasurfaces, electronic edge-waves, crystal grain boundaries, etc. The results presented in the present article shed a light on the influence of material inhomogeneities on propagation of surface waves. Within the framework of classical mechanics, an analog of Gurtin-Murdoch model is employed where elastic properties on surface are assumed to be distinct from bulk. Restricting to scalar waves on prototype square lattice half-plane, particles on considered structured surface have piecewise-constant mass and surface force-constants across an interfacial point. Particles in bulk lattice interact with nearest neighbours in a way that involves unequal force-constants parallel to surface versus normal to it. A surface wave band exists for such lattice structure wherein the waveform decays exponentially inside half-plane. A formula for surface wave transmittance is given based on an exact solution on half-plane, and, thus, previous work of Sharma & Eremeyev 2019 Int. J. Eng. Sci. 143, 33-38 is extended. An explicit expression for fraction of energy influx leaked via bulk waves is a highlight. Included are graphical results for several illustrative values of surface structure parameters.
△ Less
Submitted 15 September, 2023;
originally announced September 2023.
-
A brief introduction to bulk viscosity of fluids
Authors:
Bhanuday Sharma,
Rakesh Kumar
Abstract:
Fluid flows are typically studied by solving the Navier--Stokes equation. One of the fundamental assumptions of this equation is Stokes' hypothesis. This hypothesis assumes bulk viscosity, to be identically zero. The Stokes' hypothesis is a reasonable approximation for commonly observed fluid flows; therefore, Navier--Stokes equation gives satisfactory results in these situations. However, there a…
▽ More
Fluid flows are typically studied by solving the Navier--Stokes equation. One of the fundamental assumptions of this equation is Stokes' hypothesis. This hypothesis assumes bulk viscosity, to be identically zero. The Stokes' hypothesis is a reasonable approximation for commonly observed fluid flows; therefore, Navier--Stokes equation gives satisfactory results in these situations. However, there are circumstances where this hypothesis does not hold good, and therefore, the classical Navier--Stokes equation becomes inapt. These situations include the absorption of sound waves, hypersonic flows, turbulent flows, and flow of Martian air etc. Reliable analytical and computational studies of these flows requires account of bulk viscosity in the governing equations. In this article, we provide a brief review of the subject of bulk viscosity. We start with a brief background of this topic. Then we discuss the underlying microscopic mechanisms that give rise to bulk viscosity effects. It was followed by a review of methods available in the literature for estimation of this parameter. Finally, a review of the studies that analyze the effects of bulk viscosity in various fluid flows is provided.
△ Less
Submitted 15 March, 2023;
originally announced March 2023.
-
A new method to identify elastic wave propagation mode and polarized bandgaps in periodic solid media
Authors:
Maria Jose Carrillo Munoz,
Bhisham Sharma
Abstract:
We present a new computational method for the accurate identification of the propagation modes and polarizations of elastic waves propagating in periodic solid structures and metamaterials. The method uses the eigenvectors calculated at each propagating wave solution eigenfrequency to identify the contribution of each translational and rotational component of the total mass in motion. We use this…
▽ More
We present a new computational method for the accurate identification of the propagation modes and polarizations of elastic waves propagating in periodic solid structures and metamaterials. The method uses the eigenvectors calculated at each propagating wave solution eigenfrequency to identify the contribution of each translational and rotational component of the total mass in motion. We use this information to identify the dominant wave propagation mode by defining a relative effective modal mass vector. Further, we associate each wave solution with its correct polarization by defining a new polarization factor that quantifies the relative orientation between the wave propagation and lattice motion directions and provides a positive numerical value between 0 (pure S-wave) and 1 (pure P-wave). Further, we suggest a graphical representational scheme for an easier visualization of the wave polarization within traditional dispersion plots. The method is validated by comparing our predictions against previously published results for various elastodynamic problems. Finally, we use the proposed method to analyze the effect of various lattice and structural parameter perturbations on the elastic wave propagation and bandgap behavior of a square planar beam lattice and show the emergence of previously unobserved dynamic characteristics, including various polarized bandgaps, fluid-like behavior, and ultralow-frequency SH- and SV-bandgaps that extend to 0 Hz. The proposed method provides an alternative computational approach to the typically employed visual mode inspection technique and provides a robust technique for analyzing the elastic wave response of periodic solid media.
△ Less
Submitted 26 January, 2023;
originally announced January 2023.
-
Bulk viscosity of dilute gases and their mixtures
Authors:
Bhanuday Sharma,
Rakesh Kumar,
Savitha Pareek
Abstract:
In this work, we use the Green-Kubo method to study the bulk viscosity of various dilute gases and their mixtures. First, we study the effects of the atomic mass on the bulk viscosity of dilute diatomic gas by estimating the bulk viscosity of four different isotopes of nitrogen gas. We then study the effects of addition of noble gas on the bulk viscosity of dilute nitrogen gas. We consider mixture…
▽ More
In this work, we use the Green-Kubo method to study the bulk viscosity of various dilute gases and their mixtures. First, we study the effects of the atomic mass on the bulk viscosity of dilute diatomic gas by estimating the bulk viscosity of four different isotopes of nitrogen gas. We then study the effects of addition of noble gas on the bulk viscosity of dilute nitrogen gas. We consider mixtures of nitrogen with three noble gases, viz., neon, argon, and krypton at eight different compositions between pure nitrogen to pure noble gas. It is followed by an estimation of bulk viscosity of pure oxygen and mixtures of nitrogen and oxygen for various compositions. In this case, three different composition are considered, viz., 25\% N$_2$ + 75\% O$_2$, 50\% N$_2$ + 50\% O$_2$, and 78\% N$_2$ + 22\% O$_2$. The last composition is aimed to represent the dry air. A brief review of works that study the effects of incorporation of bulk viscosity in analysis of various flow situations has also been provided.
△ Less
Submitted 10 July, 2022;
originally announced July 2022.
-
Bulk viscosity of dilute monatomic gases
Authors:
Bhanuday Sharma,
Rakesh Kumar,
Savitha Pareek,
Ashish Singh
Abstract:
Extensive research has been carried out in the past to estimate the bulk viscosity of dense monatomic fluids; however, little attention has been paid to estimate the same in the dilute gas regime. In this work, we perform precise Green-Kubo calculations in molecular dynamics simulations to estimate the bulk viscosity of dilute argon gas. The investigated temperature and pressure range is 300 to 75…
▽ More
Extensive research has been carried out in the past to estimate the bulk viscosity of dense monatomic fluids; however, little attention has been paid to estimate the same in the dilute gas regime. In this work, we perform precise Green-Kubo calculations in molecular dynamics simulations to estimate the bulk viscosity of dilute argon gas. The investigated temperature and pressure range is 300 to 750 K and 0.5 to 1.5 bar respectively. It is observed that the estimated bulk viscosity is $O(10^{-10})$ Pa s, which is several orders of magnitude smaller than that of other diatomic and polyatomic gases, but nonetheless, not an absolute zero as typically assumed. It implies that Stokes' hypothesis is true for dilute monatomic gases only in an approximate rather than absolute sense. The variation of bulk viscosity with pressures at constant temperatures has also been studied and is found to be of quadratic nature. The obtained bulk viscosity values are also reported in the reduced Lennard-Jones units to enable extension of the present results to other noble gases as well. It has also been observed that the bulk viscosity of Lennard-Jones monatomic gases becomes temperature independent at very low densities.
△ Less
Submitted 4 July, 2022;
originally announced July 2022.
-
Prandtl number effects on the hydrodynamic stability of compressible boundary layers: flow-thermodynamic interactions
Authors:
Bajrang Sharma,
Sharath S. Girimaji
Abstract:
Hydrodynamic stability of compressible boundary layers is strongly influenced by Mach number ($M$), Prandtl number ($Pr$) and thermal wall boundary condition. These effects manifest on the flow stability via the flow-thermodynamic interactions. Comprehensive understanding of stability flow physics is of fundamental interest and important for developing predictive tools and closure models for integ…
▽ More
Hydrodynamic stability of compressible boundary layers is strongly influenced by Mach number ($M$), Prandtl number ($Pr$) and thermal wall boundary condition. These effects manifest on the flow stability via the flow-thermodynamic interactions. Comprehensive understanding of stability flow physics is of fundamental interest and important for developing predictive tools and closure models for integrated transition-to-turbulence computations. The flow-thermodynamic interactions are examined using linear analysis and direct numerical simulations (DNS) in the following parameter regime: $0.5 \leq M \leq 8$; and, $0.5 \leq Pr \leq 1.3$. For adiabatic wall boundary condition, increasing Prandtl number has a destabilizing effect. In this work, we characterize the behavior of production, pressure-strain correlation and pressure-dilatation as functions of Mach and Prandtl numbers. First and second instability modes exhibit similar stability trends but the underlying flow physics is shown to be diametrically opposite. The Prandtl-number influence on instability is explicated in terms of the base flow profile with respect to the different perturbation mode shapes.
△ Less
Submitted 11 May, 2022;
originally announced May 2022.
-
Scalable Multi-node Fast Fourier Transform on GPUs
Authors:
Manthan Verma,
Soumyadeep Chatterjee,
Gaurav Garg,
Bharatkumar Sharma,
Nishant Arya,
Shashi Kumar,
Anish Saxena,
Mahendra K. Verma
Abstract:
In this paper, we present the details of our multi-node GPU-FFT library, as well its scaling on Selene HPC system. Our library employs slab decomposition for data division and MPI for communication among GPUs. We performed GPU-FFT on $1024^3$, $2048^3$, and $4096^3$ grids using a maximum of 512 A100 GPUs. We observed good scaling for $4096^3$ grid with 64 to 512 GPUs. We report that the timings of…
▽ More
In this paper, we present the details of our multi-node GPU-FFT library, as well its scaling on Selene HPC system. Our library employs slab decomposition for data division and MPI for communication among GPUs. We performed GPU-FFT on $1024^3$, $2048^3$, and $4096^3$ grids using a maximum of 512 A100 GPUs. We observed good scaling for $4096^3$ grid with 64 to 512 GPUs. We report that the timings of multicore FFT of $1536^3$ grid with 196608 cores of Cray XC40 is comparable to that of GPU-FFT of $2048^3$ grid with 128 GPUs. The efficiency of GPU-FFT is due to the fast computation capabilities of A100 card and efficient communication via NVlink.
△ Less
Submitted 25 February, 2022;
originally announced February 2022.
-
Sound Absorption and Transmission Loss Properties of Open-Celled Aluminum Foams with Stepwise Relative Density Gradients
Authors:
Amulya Lomte,
Bhisham Sharma,
Mary Drouin,
Denver Schaffarzick
Abstract:
We investigate the acoustical properties of uncompressed and compressed open-celled aluminum metal foams fabricated using a directional solidification foaming process. We compressed the fabricated foams using a hydraulic press to different compression ratios and characterized the effect of compression on the cellular microstructure using microtomography and scanning electron microscopy. The static…
▽ More
We investigate the acoustical properties of uncompressed and compressed open-celled aluminum metal foams fabricated using a directional solidification foaming process. We compressed the fabricated foams using a hydraulic press to different compression ratios and characterized the effect of compression on the cellular microstructure using microtomography and scanning electron microscopy. The static airflow resistances of the samples are measured and related to the observed microstructural changes. We measured the normal incidence acoustical properties using two- and four-microphone impedance tube methods and show that the compression substantially improves their sound absorption and transmission loss performance. We then stack individual disks with different compression ratios to create various stepwise relative density gradient configurations and show that stepwise gradients provide a significant improvement in properties as compared to the uncompressed sample. The effect of increasing and decreasing relative density gradients on the overall absorption and transmission loss behavior is characterized. Finally, we use an experimentally informed and validated transfer matrix method to predict the effect of various layer thicknesses and stacking sequences on the global acoustical properties. Our results show that open-celled metal foams with stepwise relative density gradients can be designed to provide tailored acoustic absorption performance while reducing the overall weight of the noise reduction package.
△ Less
Submitted 5 November, 2021;
originally announced November 2021.
-
On the performance of GPU accelerated q-LSKUM based meshfree solvers in Fortran, C++, Python, and Julia
Authors:
Nischay Ram Mamidi,
Kumar Prasun,
Dhruv Saxena,
Anil Nemili,
Bharatkumar Sharma,
S. M. Deshpande
Abstract:
This report presents a comprehensive analysis of the performance of GPU accelerated meshfree CFD solvers for two-dimensional compressible flows in Fortran, C++, Python, and Julia. The programming model CUDA is used to develop the GPU codes. The meshfree solver is based on the least squares kinetic upwind method with entropy variables (q-LSKUM). To assess the computational efficiency of the GPU sol…
▽ More
This report presents a comprehensive analysis of the performance of GPU accelerated meshfree CFD solvers for two-dimensional compressible flows in Fortran, C++, Python, and Julia. The programming model CUDA is used to develop the GPU codes. The meshfree solver is based on the least squares kinetic upwind method with entropy variables (q-LSKUM). To assess the computational efficiency of the GPU solvers and to compare their relative performance, benchmark calculations are performed on seven levels of point distribution. To analyse the difference in their run-times, the computationally intensive kernel is profiled. Various performance metrics are investigated from the profiled data to determine the cause of observed variation in run-times. To address some of the performance related issues, various optimisation strategies are employed. The optimised GPU codes are compared with the naive codes, and conclusions are drawn from their performance.
△ Less
Submitted 16 August, 2021;
originally announced August 2021.
-
Additive Manufacturing of Fibrous Sound Absorbers
Authors:
William Johnston,
Bhisham Sharma
Abstract:
We investigate the possibility of additively manufacturing fibrous sound absorbers using fused deposition modeling. Two methods for 3D printing fibers are proposed. The fiber bridging method involves extruding the filament between two points with no underlying supports. The extrude-and-pull method involves extruding a filament droplet before pulling away the extruder rapidly to generate thin fiber…
▽ More
We investigate the possibility of additively manufacturing fibrous sound absorbers using fused deposition modeling. Two methods for 3D printing fibers are proposed. The fiber bridging method involves extruding the filament between two points with no underlying supports. The extrude-and-pull method involves extruding a filament droplet before pulling away the extruder rapidly to generate thin fibers. Both methods can produce fibers with aspect ratios greater than 100. Optical microscopy is used to investigate the effect of various printing parameters on the fiber characteristics. The sound absorption coefficient of samples printed using the two techniques are measured using a two-microphone normal incidence impedance tube setup. Effects of printing parameters and fiber density variables are experimentally studied. The experimental studies are supported by the Johnson-Champoux-Allard semi-empirical analytical model informed using an inverse characterization approach. The analytical model is then utilized to understand the effect of fiber parameters on the acoustical transport parameters. It is observed that the two methods result in individual fibers with distinct characteristics. On average, the fiber bridging method results in thicker fibers, which results in comparatively higher sound absorption. However, the extrude-and-pull method results in fibers with hair-like characteristics (thick base with progressively decreasing thickness) and one may easily incorporate it within existing additive manufacturing routines to add fibers to a base surface, thus opening up a new route towards fiber-enhanced multifunctional structures.
△ Less
Submitted 23 March, 2021; v1 submitted 13 January, 2021;
originally announced January 2021.
-
Local vortex line topology and geometry in turbulence
Authors:
Bajrang Sharma,
Rishita Das,
Sharath S. Girimaji
Abstract:
The local streamline topology classification method of Chong et al. (1990) is adapted and extended to describe the geometry of infinitesimal vortex lines. Direct numerical simulation (DNS) data of forced isotropic turbulence reveals that joint probability density function (PDF) of the second ($q_ω$) and third ($r_ω$) normalized invariants of the vorticity gradient tensor asymptotes to a self-simil…
▽ More
The local streamline topology classification method of Chong et al. (1990) is adapted and extended to describe the geometry of infinitesimal vortex lines. Direct numerical simulation (DNS) data of forced isotropic turbulence reveals that joint probability density function (PDF) of the second ($q_ω$) and third ($r_ω$) normalized invariants of the vorticity gradient tensor asymptotes to a self-similar bell form beyond $Re_λ> 200$. The same PDF shape is also seen at the late stages of breakdown of Taylor-Green vortex suggesting the universality of the bell-shaped pdf form in turbulent flows. Additionally, vortex reconnection from different initial configurations is examined. The local topology and geometry of the reconnection bridge is shown to be identical in all cases with elliptic vortex lines on one side and hyperbolic filaments on the other. Overall, topological characterization of vorticity field provides a useful analytical basis for examining vorticity dynamics in turbulence and other fluid flows.
△ Less
Submitted 4 November, 2020;
originally announced November 2020.
-
Variational principles of nonlinear magnetoelastostatics and their correspondences
Authors:
Basant Lal Sharma,
Prashant Saxena
Abstract:
We derive the equations of nonlinear magnetoelastostatics using several variational formulations involving the mechanical deformation and an independent field representing the magnetic component. An equivalence is also discussed, modulo certain boundary integrals or constant integrals, between these formulations using the Legendre transform and properties of Maxwell's equations. The second variati…
▽ More
We derive the equations of nonlinear magnetoelastostatics using several variational formulations involving the mechanical deformation and an independent field representing the magnetic component. An equivalence is also discussed, modulo certain boundary integrals or constant integrals, between these formulations using the Legendre transform and properties of Maxwell's equations. The second variation based bifurcation equations are stated for the incremental fields as well for all five variational principles. When the total potential energy is defined over the infinite space surrounding the body, we find that the inclusion of certain term in the energy principle, associated with the externally applied magnetic field, leads to slight changes in the Maxwell stress tensor and associated boundary conditions. On the other hand, when the energy contained in the magnetic field is restricted to finite volumes, we find that there is a correspondence between the discussed formulations and associated expressions of physical entities. In view of a diverse set of boundary data and nature of externally applied controls in the problems studied in the literature, along with a equally diverse list of variational principles employed in modeling, our analysis emphasizes care in the choice of variational principle and unknown fields so that consistency with other choices is also satisfied.
△ Less
Submitted 11 September, 2020;
originally announced September 2020.
-
Null Lagrangians in Cosserat elasticity
Authors:
Basant Lal Sharma,
Nirupam Basak
Abstract:
In the framework of nonlinear theory of Cosserat elasticity, also called micropolar elasticity, we provide the complete characterization of null Lagrangians for three dimensional bodies as well as for shells. Using the Gibb's rotation vector for description of the microrotation, this task is possible by an application of a theorem stated by Olver and Sivaloganathan in `{the structure of null Lagra…
▽ More
In the framework of nonlinear theory of Cosserat elasticity, also called micropolar elasticity, we provide the complete characterization of null Lagrangians for three dimensional bodies as well as for shells. Using the Gibb's rotation vector for description of the microrotation, this task is possible by an application of a theorem stated by Olver and Sivaloganathan in `{the structure of null Lagrangians}' (Nonlinearity, {1}, 1988, pp. 389-398). A set of necessary and sufficient conditions is also provided for the elasticity tensors to correspond to a null Lagrangian in linearized micropolar theory.
△ Less
Submitted 7 September, 2020;
originally announced September 2020.
-
Null Lagrangians in linear theories of micropolar type and few other generalizations of elasticity
Authors:
Nirupam Basak,
Basant Lal Sharma
Abstract:
In the context of linear theories of generalized elasticity including those for homogeneous micropolar media, quasicrystals, piezoelectric and piezomagnetic media, we explore the concept of null Lagrangians. For obtaining the family of null Lagrangians we employ the sufficient conditions of H. Rund. In some cases a non-zero null Lagrangian is found and the stored energy admits a split into a null…
▽ More
In the context of linear theories of generalized elasticity including those for homogeneous micropolar media, quasicrystals, piezoelectric and piezomagnetic media, we explore the concept of null Lagrangians. For obtaining the family of null Lagrangians we employ the sufficient conditions of H. Rund. In some cases a non-zero null Lagrangian is found and the stored energy admits a split into a null Lagrangian and a remainder. However, the null Lagrangian vanishes whenever the relevant elasticity tensor obeys certain symmetry conditions which can be construed as an analogue of the Cauchy relations.
△ Less
Submitted 7 September, 2020;
originally announced September 2020.
-
Wave scattering on lattice structures involving array of cracks
Authors:
Gaurav Maurya,
Basant Lal Sharma
Abstract:
Scattering of waves due to a vertical array of equally-spaced cracks on a square lattice is studied. The convenience of Floquet periodicity reduces the study to that of scattering of specific wave-mode from single crack in a waveguide. The discrete Green's function, for the waveguide, is used to obtain semi-analytical solution for scattering problem in case of finite cracks whereas the limiting ca…
▽ More
Scattering of waves due to a vertical array of equally-spaced cracks on a square lattice is studied. The convenience of Floquet periodicity reduces the study to that of scattering of specific wave-mode from single crack in a waveguide. The discrete Green's function, for the waveguide, is used to obtain semi-analytical solution for scattering problem in case of finite cracks whereas the limiting case of semi-infinite cracks is tackled by an application of Wiener--Hopf technique. Reflectance and transmittance of such an array of cracks, in terms of incident wave parameters, is analyzed. Potential applications include construction of tunable atomic scale interfaces to control energy transmission at different frequencies.
△ Less
Submitted 16 February, 2020; v1 submitted 12 December, 2019;
originally announced December 2019.
-
Wiener-Hopf factorisation on unit circle: some examples from discrete scattering
Authors:
Basant Lal Sharma
Abstract:
I discuss some problems featuring scattering due to discrete edges on certain structures. These problems stem from linear difference equations and the underlying basic issue can be mapped to Wiener-Hopf factorization on an annulus in the complex plane. In most of these problems, the relevant factorization involves a scalar function, while in some cases a nxn matrix kernel, with n>=2, appears. For…
▽ More
I discuss some problems featuring scattering due to discrete edges on certain structures. These problems stem from linear difference equations and the underlying basic issue can be mapped to Wiener-Hopf factorization on an annulus in the complex plane. In most of these problems, the relevant factorization involves a scalar function, while in some cases a nxn matrix kernel, with n>=2, appears. For the latter, I give examples of two non-trivial cases where it can be further reduced to a scalar problem but in general this is not the case. Some of the problems that I have presented in this paper can be also interpreted as discrete analogues of well-known scattering problems, notably a few of which are still open, in Wiener-Hopf factorization on an infinite strip in complex plane.
△ Less
Submitted 12 December, 2019;
originally announced December 2019.
-
On equilibrium equations and their perturbations using three different variational formulations of nonlinear electroelastostatics
Authors:
Prashant Saxena,
Basant Lal Sharma
Abstract:
We derive the equations of nonlinear electroelastostatics using three different variational formulations involving the deformation function and an independent field variable representing the electric character - considering either one of the electric field $\mathbb{E}$, electric displacement $\mathbb{D}$, or electric polarization $\mathbb{P}$. The first variation of the energy functional results i…
▽ More
We derive the equations of nonlinear electroelastostatics using three different variational formulations involving the deformation function and an independent field variable representing the electric character - considering either one of the electric field $\mathbb{E}$, electric displacement $\mathbb{D}$, or electric polarization $\mathbb{P}$. The first variation of the energy functional results in the set of Euler-Lagrange partial differential equations which are the equilibrium equations, boundary conditions, { and certain constitutive equations} for the electroelastic system. The partial differential equations for obtaining the bifurcation point have been also found using the second variation based bilinear functional. We show that the well-known Maxwell stress in vacuum is a natural outcome of the derivation of equations from the variational principles and does not depend on the formulation used. As a result of careful analysis it is found that there are certain terms in the bifurcation equation which appear difficult to obtain by an ordinary perturbation based analysis of the Euler-Lagrange equation. From a practical viewpoint, the formulations based on $\mathbb{E}$ and $\mathbb{D}$ result in simpler equations and are anticipated to be more suitable for analysing problems of stability as well as post-buckling behaviour.
△ Less
Submitted 19 February, 2020; v1 submitted 16 November, 2019;
originally announced November 2019.
-
Scattering on square lattice from crack with damage zone
Authors:
Basant Lal Sharma,
Gennady Mishuris
Abstract:
A semi-infinite crack in infinite square lattice is subjected to a wave coming from infinity, thereby leading to its scattering by the crack surfaces. A partially damaged zone ahead of the crack-tip is modeled by an arbitrarily distributed stiffness of the damaged links. While the open crack, with an atomically sharp crack-tip, in the lattice has been solved in closed form with help of {the} scala…
▽ More
A semi-infinite crack in infinite square lattice is subjected to a wave coming from infinity, thereby leading to its scattering by the crack surfaces. A partially damaged zone ahead of the crack-tip is modeled by an arbitrarily distributed stiffness of the damaged links. While the open crack, with an atomically sharp crack-tip, in the lattice has been solved in closed form with help of {the} scalar Wiener-Hopf formulation (SIAM Journal on Applied Mathematics, 75, 1171--1192; 1915--1940), the problem considered here becomes very intricate depending on the nature of damaged links. For instance, in the case of partially bridged finite zone it involves a $2\times2$ matrix kernel of formidable class. But using an original technique, the problem, including the general case of arbitrarily damaged links, is reduced to a scalar one with the exception that it involves solving an auxiliary linear system of $N \times N$ equations where $N$ defines the length of the damage zone. The proposed method does allow, effectively, the construction of an exact solution. Numerical examples and the asymptotic approximation of the scattered field far away from the crack-tip are also presented.
△ Less
Submitted 16 February, 2020; v1 submitted 15 October, 2019;
originally announced October 2019.
-
A Family of Solitary Waves in Frenkel-Kontorova Lattice
Authors:
Basant Lal Sharma
Abstract:
A family of solitary waves is constructed in Frenkel-Kontorova model and its continuum and quasi-continuum approximations. Each solitary waves is characterised by the number of local maxima in its profile and a relation between external force and the velocity of wave. Such waves may be interpreted as a coherent motion, with constant velocity, of two dislocations of opposite sign or of kink-antikin…
▽ More
A family of solitary waves is constructed in Frenkel-Kontorova model and its continuum and quasi-continuum approximations. Each solitary waves is characterised by the number of local maxima in its profile and a relation between external force and the velocity of wave. Such waves may be interpreted as a coherent motion, with constant velocity, of two dislocations of opposite sign or of kink-antikink pair.
△ Less
Submitted 15 October, 2019;
originally announced October 2019.
-
Transmission of waves across atomic step discontinuities in discrete nanoribbon structures
Authors:
Basant Lal Sharma
Abstract:
Scalar wave propagation across a semi-infinite step or step-like discontinuity on any one boundary of the square lattice waveguides is considered within nearest-neighbour interaction approximation. An application of the Wiener-Hopf method does yield an exact solution of the discrete scattering problem, using which, as the main result of the paper, the transmission coefficients for energy flux are…
▽ More
Scalar wave propagation across a semi-infinite step or step-like discontinuity on any one boundary of the square lattice waveguides is considered within nearest-neighbour interaction approximation. An application of the Wiener-Hopf method does yield an exact solution of the discrete scattering problem, using which, as the main result of the paper, the transmission coefficients for energy flux are obtained. It is assumed that a wave mode is incident from either side of the step and the question addressed is what fraction of incident energy is transmitted across the atomic step discontinuity. A total of ten configurations are presented that arise due to various placements of discrete Dirichlet and Neumann boundary conditions on the waveguide. Numerical illustrations of a measure of conductance are provided.
△ Less
Submitted 6 October, 2019;
originally announced October 2019.
-
Wave transmission across surface interfaces in lattice structures
Authors:
Basant Lal Sharma,
Victor A. Eremeyev
Abstract:
Within the lattice dynamics formulation, we present an exact solution for anti-plane surface waves in a square lattice strip with a surface row of material particles of two types separated by a linear interface. The considered problem is a discrete analog of an elastic half-space with surface stresses modelled through the simplified Gurtin-Murdoch model, where we have an interfacial line separatin…
▽ More
Within the lattice dynamics formulation, we present an exact solution for anti-plane surface waves in a square lattice strip with a surface row of material particles of two types separated by a linear interface. The considered problem is a discrete analog of an elastic half-space with surface stresses modelled through the simplified Gurtin-Murdoch model, where we have an interfacial line separating areas with different surface elastic properties. The main attention is paid to the transmittance and the reflectance of a wave across the interface. The presented results shed a light on the influence on surface waves of surface inhomogeneity in surface elastic properties such as grain and subgrain boundaries.
△ Less
Submitted 13 September, 2019;
originally announced September 2019.
-
Energy expense via lattice wave emission for mode III brittle fracture in square, triangular, and hexagonal lattices
Authors:
Basant Lal Sharma
Abstract:
The mode III fracture problem for a hexagonal lattice is discussed and compared with square and triangular lattices.
The mode III fracture problem for a hexagonal lattice is discussed and compared with square and triangular lattices.
△ Less
Submitted 15 September, 2019;
originally announced September 2019.
-
Discrete scattering by a pair of parallel defects
Authors:
Basant Lal Sharma,
Gaurav Maurya
Abstract:
Scattering of a time harmonic anti-plane shear wave due to either a pair of crack tips or a pair of rigid constraint tips on square lattice is considered. The two problems correspond to the so called zero-offset case of scattering due to a pair of identical Sommerfeld screens. The peculiar structural symmetry allows the reduction of coupled equations to two scalar Wiener-Hopf equations and a total…
▽ More
Scattering of a time harmonic anti-plane shear wave due to either a pair of crack tips or a pair of rigid constraint tips on square lattice is considered. The two problems correspond to the so called zero-offset case of scattering due to a pair of identical Sommerfeld screens. The peculiar structural symmetry allows the reduction of coupled equations to two scalar Wiener-Hopf equations and a total of four geometrically reduced problems on lattice half-plane. Exact solution of each problem for incidence from the bulk lattice, as well as from an associated lattice waveguide, is constructed. A suitable superposition of the four expressions is used to construct the solution of the main problem. The discrete paradigm involving the wave mode incident from the waveguide is relevant for modern applications where an investigation of mechanisms of electronic and thermal transport at nanoscale remains an interesting problem.
△ Less
Submitted 5 March, 2020; v1 submitted 26 June, 2019;
originally announced June 2019.
-
Anti-plane surface waves in media with surface structure: discrete vs. continuum model
Authors:
Victor A. Eremeyev,
Basant Lal Sharma
Abstract:
We present a comparison of the dispersion relations derived for anti-plane surface waves using the two distinct approaches of the surface elasticity vis-a-vis the lattice dynamics. We consider an elastic half-space with surface stresses described within the Gurtin-Murdoch model, and present a formulation of its discrete counterpart that is a square lattice half-plane with surface row of particles…
▽ More
We present a comparison of the dispersion relations derived for anti-plane surface waves using the two distinct approaches of the surface elasticity vis-a-vis the lattice dynamics. We consider an elastic half-space with surface stresses described within the Gurtin-Murdoch model, and present a formulation of its discrete counterpart that is a square lattice half-plane with surface row of particles having mass and elastic bonds different from the ones in the bulk. As both models possess anti-plane surface waves we discuss similarities between the continuum and discrete viewpoint. In particular, in the context of the behaviour of phase velocity, we discuss the possible characterization of the surface shear modulus through the parameters involved in lattice formulation.
△ Less
Submitted 14 June, 2019;
originally announced June 2019.
-
Three Dimensional Pseudo-Spectral Compressible Magnetohydrodynamic GPU Code for Astrophysical Plasma Simulation
Authors:
Rupak Mukherjee,
Rajaraman Ganesh,
Vinod Saini,
Udaya Maurya,
Nagavijayalakshmi Vydyanathan,
Bharatkumar Sharma
Abstract:
This paper presents the benchmarking and scaling studies of a GPU accelerated three dimensional compressible magnetohydrodynamic code. The code is developed keeping an eye to explain the large and intermediate scale magnetic field generation is cosmos as well as in nuclear fusion reactors in the light of the theory given by Eugene Newman Parker. The spatial derivatives of the code are pseudo-spect…
▽ More
This paper presents the benchmarking and scaling studies of a GPU accelerated three dimensional compressible magnetohydrodynamic code. The code is developed keeping an eye to explain the large and intermediate scale magnetic field generation is cosmos as well as in nuclear fusion reactors in the light of the theory given by Eugene Newman Parker. The spatial derivatives of the code are pseudo-spectral method based and the time solvers are explicit. GPU acceleration is achieved with minimal code changes through OpenACC parallelization and use of NVIDIA CUDA Fast Fourier Transform library (cuFFT). NVIDIAs unified memory is leveraged to enable over-subscription of the GPU device memory for seamless out-of-core processing of large grids. Our experimental results indicate that the GPU accelerated code is able to achieve upto two orders of magnitude speedup over a corresponding OpenMP parallel, FFTW library based code, on a NVIDIA Tesla P100 GPU. For large grids that require out-of-core processing on the GPU, we see a 7x speedup over the OpenMP, FFTW based code, on the Tesla P100 GPU. We also present performance analysis of the GPU accelerated code on different GPU architectures - Kepler, Pascal and Volta.
△ Less
Submitted 30 October, 2018;
originally announced October 2018.
-
MHD Pulsatile Two-Phase Blood Flow Through a Stenosed Artery with Heat and Mass Transfer
Authors:
Bhavya Tripathi,
Bhupendra Kumar Sharma,
Madhu Sharma
Abstract:
In this paper, effects of heat and mass transfer on two-phase pulsatile blood flow through a narrowed stenosed artery with radiation and the chemical reaction have been investigated. A vertical artery is assumed in which magnetic field is applied along the radial direction of the artery. The characteristics of blood in narrow arteries are analyzed by considering blood as Newtonian fluid in both co…
▽ More
In this paper, effects of heat and mass transfer on two-phase pulsatile blood flow through a narrowed stenosed artery with radiation and the chemical reaction have been investigated. A vertical artery is assumed in which magnetic field is applied along the radial direction of the artery. The characteristics of blood in narrow arteries are analyzed by considering blood as Newtonian fluid in both core as well as in plasma regions. Exact solutions have been found for velocity, energy and concentration equations of the blood flow. To understand the behavior of blood flow, graphs of the velocity profile, wall shear stress, flow rate, flow impedance and concentration profile have been portrayed for different values of the magnetic and radiation parameter. In order to validate our result, a comparative study has been presented between the single-phase and two-phase model of the blood flow and it is observed that the two-phase model fits more accurately with the experimental data than the single phase model. For pulsatile flow, the phase difference between the pressure gradient and flow rate has been displayed with magnetic field parameter and height of the stenosis. Contour plots have been plotted for 10%, 20% and 30% case of an arterial blockage.
△ Less
Submitted 26 July, 2018; v1 submitted 27 May, 2017;
originally announced May 2017.
-
MHD blood flow and heat transfer through an inclined porous stenosed artery with variable viscosity
Authors:
Bhavya Tripathi,
Bhupendra Kumar Sharma
Abstract:
In this article, effects of heat transfer on MHD blood flow through a stenosed inclined porous artery with heat source have been investigated. The viscosity of the blood is assumed to be varying radially with hematocrit throughout the region of the artery. Governing equations have been derived by treating blood as incompressible magnetohydrodynamic (MHD) Newtonian fluid. Momentum and energy equati…
▽ More
In this article, effects of heat transfer on MHD blood flow through a stenosed inclined porous artery with heat source have been investigated. The viscosity of the blood is assumed to be varying radially with hematocrit throughout the region of the artery. Governing equations have been derived by treating blood as incompressible magnetohydrodynamic (MHD) Newtonian fluid. Momentum and energy equations of the fluid flow are simplified under the assumption of mild stenosis. Homotopy perturbation method (HPM) is used to solve nonlinear differential equations for velocity and temperature profiles of the blood flow. Variation of flow rate and shear stress for different values of inclination angle and hematocrit parameter along the diseased part of artery have been plotted graphically. For having the adequate insight of the flow pattern in the diseased artery, velocity contours have been plotted for different values of the height of the stenosis and for different inclination angles of the artery.
△ Less
Submitted 30 May, 2018; v1 submitted 11 October, 2016;
originally announced October 2016.
-
Scaling in topological properties of brain networks
Authors:
Soibam Shyamchand Singh,
Khundrakpam Budhachandra Singh,
Romana Ishrat,
B. Indrajit Sharma,
R. K. Brojen Singh
Abstract:
The organization in brain networks shows highly modular features with weak inter-modular interaction. The topology of the networks involves emergence of modules and sub-modules at different levels of constitution governed by fractal laws. The modular organization, in terms of modular mass, inter-modular, and intra-modular interaction, also obeys fractal nature. The parameters which characterize to…
▽ More
The organization in brain networks shows highly modular features with weak inter-modular interaction. The topology of the networks involves emergence of modules and sub-modules at different levels of constitution governed by fractal laws. The modular organization, in terms of modular mass, inter-modular, and intra-modular interaction, also obeys fractal nature. The parameters which characterize topological properties of brain networks follow one parameter scaling theory in all levels of network structure which reveals the self-similar rules governing the network structure. The calculated fractal dimensions of brain networks of different species are found to decrease when one goes from lower to higher level species which implicates the more ordered and self-organized topography at higher level species. The sparsely distributed hubs in brain networks may be most influencing nodes but their absence may not cause network breakdown, and centrality parameters characterizing them also follow one parameter scaling law indicating self-similar roles of these hubs at different levels of organization in brain networks.
△ Less
Submitted 20 September, 2015;
originally announced September 2015.
-
Local resonance and Bragg bandgaps in sandwich beams containing periodically inserted resonators
Authors:
Bhisham Sharma,
Chin-Teh Sun
Abstract:
We study the low frequency wave propagation behavior of sandwich beams containing periodically embedded internal resonators. A closed form expression for the propagation constant is obtained using a phased array approach and verified using finite element simulations. We show that local resonance and Bragg bandgaps coexist in such a system and that the width of both bandgaps is a function of resona…
▽ More
We study the low frequency wave propagation behavior of sandwich beams containing periodically embedded internal resonators. A closed form expression for the propagation constant is obtained using a phased array approach and verified using finite element simulations. We show that local resonance and Bragg bandgaps coexist in such a system and that the width of both bandgaps is a function of resonator parameters as well as their periodicity. The interaction between the two bandgaps is studied by varying the local resonance frequency. We find that a single combined bandgap does not exist for this system and that the Bragg bandgaps transition into sub-wavelength bandgaps when the local resonance frequency is above their associated classical Bragg frequency.
△ Less
Submitted 31 March, 2015;
originally announced March 2015.
-
Impact load mitigation in sandwich beams using local resonators
Authors:
B. Sharma,
C. T. Sun
Abstract:
Dynamic response of sandwich beams with resonators embedded in the cores subjected to impact loads is studied. Using finite element models the effectiveness of various local resonator frequencies under a given impact load is compared to the behavior of an equivalent mass beam. It is shown that addition of appropriately chosen local resonators into the sandwich beam is an effective method of improv…
▽ More
Dynamic response of sandwich beams with resonators embedded in the cores subjected to impact loads is studied. Using finite element models the effectiveness of various local resonator frequencies under a given impact load is compared to the behavior of an equivalent mass beam. It is shown that addition of appropriately chosen local resonators into the sandwich beam is an effective method of improving its flexural bending behavior under impact loads. The effect of a given local resonance frequency under different impact load durations is also studied. It is demonstrated that the choice of appropriate local resonance frequency depends on the impact duration. Further, by performing transverse impact experiments, the finite element models are verified and the advantage of using internal resonators under impact loading conditions is demonstrated.
△ Less
Submitted 2 February, 2015;
originally announced February 2015.
-
Acoustic metamaterial with negative modulus and a double negative structure
Authors:
Bhisham Sharma,
Chin-teh Sun
Abstract:
An acoustic negative bulk modulus metamaterial based on the concept of expansion chambers is proposed. It is shown that addition of a neck region to an ordinary expansion chamber improves its transmission loss characteristics at low frequencies and the resulting structure displays a negative bulk modulus behavior. Additionally, membrane based metamaterials are analyzed. Using FEM, the negative den…
▽ More
An acoustic negative bulk modulus metamaterial based on the concept of expansion chambers is proposed. It is shown that addition of a neck region to an ordinary expansion chamber improves its transmission loss characteristics at low frequencies and the resulting structure displays a negative bulk modulus behavior. Additionally, membrane based metamaterials are analyzed. Using FEM, the negative density behavior of a membrane carrying a center mass and of a tensioned membrane array is analyzed and the inherent similarity of the two designs is discussed. Further, the modified expansion chamber is combined with an array of stretched membranes and the resulting structure is analyzed for double negative behavior.
△ Less
Submitted 7 January, 2015;
originally announced January 2015.
-
Econophysics: A Brief Review of Historical Development, Present Status and Future Trends
Authors:
B. G. Sharma,
Sadhana Agrawal,
Malti Sharma,
D. P. Bisen,
Ravi Sharma
Abstract:
The conventional economic approaches explore very little about the dynamics of the economic systems. Since such systems consist of a large number of agents interacting nonlinearly they exhibit the properties of a complex system. Therefore the tools of statistical physics and nonlinear dynamics has been proved to be very useful the underlying dynamics of the system. In this paper we introduce the c…
▽ More
The conventional economic approaches explore very little about the dynamics of the economic systems. Since such systems consist of a large number of agents interacting nonlinearly they exhibit the properties of a complex system. Therefore the tools of statistical physics and nonlinear dynamics has been proved to be very useful the underlying dynamics of the system. In this paper we introduce the concept of the multidisciplinary field of econophysics, a neologism that denotes the activities of Physicists who are working on economic problems to test a variety of new conceptual approaches deriving from the physical science and review the recent developments in the discipline and possible future trends.
△ Less
Submitted 3 August, 2011;
originally announced August 2011.
-
Intercellular synchronization of diffusively coupled astrocytes
Authors:
Md. Jahoor Alam,
Latika Bhayana,
Gurumayum Reenaroy Devi,
Heisnam Dinachandra Singh,
R. K. Brojen Singh,
B. Indrajit Sharma
Abstract:
We examine the synchrony of the dynamics of localized [Ca^{2+}]_i oscillations in internal pool of astrocytes via diffusing coupling of a network of such cells in a certain topology where cytosolic Ca^{2+} and inositol 1,4,5-triphosphate (IP3) are coupling molecules; and possible long range interaction among the cells. Our numerical results claim that the cells exhibit fairly well coordinated beha…
▽ More
We examine the synchrony of the dynamics of localized [Ca^{2+}]_i oscillations in internal pool of astrocytes via diffusing coupling of a network of such cells in a certain topology where cytosolic Ca^{2+} and inositol 1,4,5-triphosphate (IP3) are coupling molecules; and possible long range interaction among the cells. Our numerical results claim that the cells exhibit fairly well coordinated behaviour through this coupling mechanism. It is also seen in the results that as the number of coupling molecular species is increased, the rate of synchrony is also increased correspondingly. Apart from the topology of the cells taken, as the number of coupled cells around any one of the cells in the system is increased, the cell process information faster.
△ Less
Submitted 14 December, 2010;
originally announced December 2010.
-
Measurement of phase synchrony of coupled segmentation clocks
Authors:
Md. Jahoor Alam,
Latika Bhayana,
Gurumayum Reenaroy Devi,
Heisnam Dinachandra Singh,
R. K. Brojen Singh,
B. Indrajit Sharma
Abstract:
The temporal behaviour of segmentation clock oscillations show phase synchrony via mean field like coupling of delta protein restricting to nearest neighbours only, in a configuration of cells arranged in a regular three dimensional array. We found the increase of amplitudes of oscillating dynamical variables of the cells as the activation rate of delta-notch signaling is increased, however, the f…
▽ More
The temporal behaviour of segmentation clock oscillations show phase synchrony via mean field like coupling of delta protein restricting to nearest neighbours only, in a configuration of cells arranged in a regular three dimensional array. We found the increase of amplitudes of oscillating dynamical variables of the cells as the activation rate of delta-notch signaling is increased, however, the frequencies of oscillations are decreased correspondingly. Our results show the phase transition from desynchronized to synchronized behaviour by identifying three regimes, namely, desynchronized, transition and synchronized regimes supported by various qualitative and quantitative measurements.
△ Less
Submitted 14 December, 2010;
originally announced December 2010.
-
Order In Chaos: Definite Rules That Govern The Drift Of Moon Away From The Earth
Authors:
Sohail Alam,
B. K. Sharma
Abstract:
When the Moon was formed it was much closer to the Earth than it is today. It just needed about 20 days then to go around the Earth. Now it takes the Moon 29.5 days to make one revolution. In order to follow the conservation of angular momentum the Moon had to either move closer to the Earth or recede from Earth. The data from the Lunar Laser Ranging Experiment confirms it to be moving away and…
▽ More
When the Moon was formed it was much closer to the Earth than it is today. It just needed about 20 days then to go around the Earth. Now it takes the Moon 29.5 days to make one revolution. In order to follow the conservation of angular momentum the Moon had to either move closer to the Earth or recede from Earth. The data from the Lunar Laser Ranging Experiment confirms it to be moving away and the velocity of recession of the Moon have been found to be 3.8 cm/year. This rate is not constant though. At present the Moon's orbit has a radius of 384,000km. But what is not yet known to all is that the orbital motion of the moon is actually a spiral motion. The moon is spiralling out and a very simple mathematical equation can describe the actual spiral motion of the Moon. The generalisation of this differential equation is the basic aim of this paper here.
△ Less
Submitted 31 December, 2009;
originally announced January 2010.
-
The Architectural Design Rules of Solar Systems based on the New Perspective
Authors:
Bijay Kumar Sharma
Abstract:
On the basis of the Lunar Laser Ranging Data released by NASA on the Silver Jubilee Celebration of Man Landing on Moon on 21st July 1969-1994, theoretical formulation of Earth-Moon tidal interaction was carried out and Planetary Satellite Dynamics was established. It was found that this mathematical analysis could as well be applied to Star and Planets system and since every star could potential…
▽ More
On the basis of the Lunar Laser Ranging Data released by NASA on the Silver Jubilee Celebration of Man Landing on Moon on 21st July 1969-1994, theoretical formulation of Earth-Moon tidal interaction was carried out and Planetary Satellite Dynamics was established. It was found that this mathematical analysis could as well be applied to Star and Planets system and since every star could potentially contain an extra-solar system, hence we have a large ensemble of exoplanets to test our new perspective on the birth and evolution of solar systems. Till date 403 exoplanets have been discovered in 390 extra-solar systems. I have taken 12 single planet systems, 4 Brown Dwarf - Star systems and 2 Brown Dwarf pairs. Following architectural design rules are corroborated through this study of exoplanets. All planets are born at inner Clarke Orbit what we refer to as inner geo-synchronous orbit in case of Earth-Moon System. By any perturbative force such as cosmic particles or radiation pressure, the planet gets tipped long of aG1 or short of aG1. Here aG1 is inner Clarke Orbit. The exoplanet can either be launched on death spiral as CLOSE HOT JUPITERS or can be launched on an expanding spiral path as the planets in our Solar System are. It was also found that if the exo-planet are significant fraction of the host star then those exo-planets rapidly migrate from aG1 to aG2 and have very short Time Constant of Evolution as Brown Dwarfs have. This vindicates our basic premise that planets are always born at inner Clarke Orbit. This study vindicates the design rules which had been postulated at 35th COSPAR Scientific Assembly in 2004 at Paris, France, under the title ,New Perspective on the Birth & Evolution of Solar Systems.
△ Less
Submitted 3 November, 2009;
originally announced November 2009.
-
Irregularly Shaped Satellites-Phobos & Deimos- moons of Mars, and their evolutionary history
Authors:
Bijay Kumar Sharma
Abstract:
Phobos, a moon of Mars, is below the Clarke synchronous orbit and due to tidal interaction is losing altitude. With this altitude loss it is doomed to the fate of total destruction by direct collision with Mars. On the other hand Deimos, the second moon of Mars is in extra-synchronous orbit and almost stay put in the present orbit. The reported altitude loss of Phobos is two meter per century by…
▽ More
Phobos, a moon of Mars, is below the Clarke synchronous orbit and due to tidal interaction is losing altitude. With this altitude loss it is doomed to the fate of total destruction by direct collision with Mars. On the other hand Deimos, the second moon of Mars is in extra-synchronous orbit and almost stay put in the present orbit. The reported altitude loss of Phobos is two meter per century by wikipedia and sixty ft per century according to ozgate url . The reported time in which the destruction will take place is fiftyMy and fortyMy respectively. The authors had proposed a planetary-satellite dynamics based on detailed study of Earth-Moon. Based on this planetary satellite dynamics, two meter/century approach velocity leads to the age of Phobos to be twenty three Gyrs which is physically untenable since our Solar System age is four and a half Gyrs. Hence the present altitude loss is assumed to be twenty meter per century. This leads to the age of Phobos to be two decimal three Gyrs and age of Deimos to be two decimal two six Gyrs which is an acceptable result and from this analysis it is predicted that the travel time from the present orbital radius of nine thousand three hundred and eighty km to the Martian surface at three thousand, three hundred and ninety seven km is ten decimal and four Myrs. Hence doomsday of Phobos is at ten decimal and fourMyrs from now. Mars Express studies have confirmed that Phobos is indeed trapped in a death spiral.
△ Less
Submitted 3 November, 2009;
originally announced November 2009.
-
How Is Nature Asymmetric 2 CP and T Violation in Elementary Particle Physics
Authors:
B. Ananthanarayan,
J. Meeraa,
Bharti Sharma,
Seema Sharma,
Ritesh K. Singh
Abstract:
This two-part article considers certain fundamental symmetries of nature, namely the discrete symmetries of parity (P), charge conjugation (C) and time reversal (T), and their possible violation. Recent experimental results are discussed in some depth. In this second part, we discussion CP and $T$ violation and arrive at a synthesis.
This two-part article considers certain fundamental symmetries of nature, namely the discrete symmetries of parity (P), charge conjugation (C) and time reversal (T), and their possible violation. Recent experimental results are discussed in some depth. In this second part, we discussion CP and $T$ violation and arrive at a synthesis.
△ Less
Submitted 23 January, 2002;
originally announced January 2002.
-
How Is Nature Asymmetric ? 1. Discrete Symmetries in Particle Physics and Parity Violation
Authors:
B. Ananthanarayan,
J. Meeraa,
Bharti Sharma,
Seema Sharma,
Ritesh K. Singh
Abstract:
This two-part article considers certain fundamental symmetries of nature, namely the discrete symmetries of parity (P), charge conjugation (C) and time reversal (T), and their possible violation. Recent experimental results are discussed in some depth. In the first part of this article we present a general background and discuss parity violation.
This two-part article considers certain fundamental symmetries of nature, namely the discrete symmetries of parity (P), charge conjugation (C) and time reversal (T), and their possible violation. Recent experimental results are discussed in some depth. In the first part of this article we present a general background and discuss parity violation.
△ Less
Submitted 23 January, 2002;
originally announced January 2002.