-
Dependence of energy barrier reduction on collective excitations in square artificial spin ice: A comprehensive comparison of simulation techniques
Authors:
Sabri Koraltan,
Matteo Pancaldi,
Naëmi Leo,
Claas Abert,
Christoph Vogler,
Kevin Hofhuis,
Florian Slanovc,
Florian Bruckner,
Paul Heistracher,
Matteo Menniti,
Paolo Vavassori,
Dieter Suess
Abstract:
We perform micromagnetic simulations to study the switching barriers in square artificial spin ice systems consisting of elongated single domain magnetic islands arranged on a square lattice. By considering a double vertex composed of one central island and six nearest neighbor islands, we calculate the energy barriers between two types of double vertices by applying the string method. We investig…
▽ More
We perform micromagnetic simulations to study the switching barriers in square artificial spin ice systems consisting of elongated single domain magnetic islands arranged on a square lattice. By considering a double vertex composed of one central island and six nearest neighbor islands, we calculate the energy barriers between two types of double vertices by applying the string method. We investigate by means of micromagnetic simulations the consequences of the neighboring islands, the inhomogeneities in the magnetization of the islands and the reversal mechanisms on the energy barrier by comparing three different approaches with increasing complexity. The micromagnetic models, where the string method is applied, are compared to the currently common method, the mean barrier approximation. Our investigations indicate that a proper micromagnetic modeling of the switching process leads to significantly lower energy barriers, by up to 35% compared to the mean-barrier approximation, so decreasing the expected average life time up to seven orders of magnitude. Hereby, we investigate the influence of parallel switching channels and the conceptional approach of using a mean-barrier to calculate the corresponding rates.
△ Less
Submitted 6 June, 2020;
originally announced June 2020.
-
Hysteresis-free magnetization reversal of exchange-coupled bilayers with finite magnetic anisotropy
Authors:
Christoph Vogler,
Michael Heigl,
Andrada-Oana Mandru,
Birgit Hebler,
Miguel Marioni,
Hans Josef Hug,
Manfred Albrecht,
Dieter Suess
Abstract:
Exchange-coupled structures consisting of ferromagnetic and ferrimagnetic layers become technologically more and more important. We show experimentally the occurrence of completely reversible, hysteresis-free minor loops of [Co(0.2 nm)/Ni(0.4 nm)/Pt(0.6 nm)]$_N$ multilayers exchange-coupled to a 20 nm thick ferrimagnetic Tb$_{28}$Co$_{14}$Fe$_{58}$ layer, acting as hard magnetic pinning layer. Fur…
▽ More
Exchange-coupled structures consisting of ferromagnetic and ferrimagnetic layers become technologically more and more important. We show experimentally the occurrence of completely reversible, hysteresis-free minor loops of [Co(0.2 nm)/Ni(0.4 nm)/Pt(0.6 nm)]$_N$ multilayers exchange-coupled to a 20 nm thick ferrimagnetic Tb$_{28}$Co$_{14}$Fe$_{58}$ layer, acting as hard magnetic pinning layer. Furthermore, we present detailed theoretical investigations by means of micromagnetic simulations and most important a purely analytical derivation for the condition of the occurrence of full reversibility in magnetization reversal. Hysteresis-free loops always occur if a domain wall is formed during the reversal of the ferromagnetic layer and generates an intrinsic hard-axis bias field that overcomes the magnetic anisotropy field of the ferromagnetic layer. The derived condition further reveals that the magnetic anisotropy and the bulk exchange of both layers, as well as the exchange coupling strength and the thickness of the ferromagnetic layer play an important role for its reversibility.
△ Less
Submitted 9 April, 2020;
originally announced April 2020.
-
Statistical analysis of read-back signals in magnetic recording on granular media
Authors:
Florian Slanovc,
Christoph Vogler,
Olivia Muthsam,
Dieter Suess
Abstract:
The comprehensive simulation of magnetic recording, including the write and read-back process, on granular media becomes computationally expensive if the magnetization dynamics of each grain are explicitly computed. In addition, in heat-assisted magnetic recording, the writing of a single track becomes a random process since the temperature must be considered and thermal noise is involved. Further…
▽ More
The comprehensive simulation of magnetic recording, including the write and read-back process, on granular media becomes computationally expensive if the magnetization dynamics of each grain are explicitly computed. In addition, in heat-assisted magnetic recording, the writing of a single track becomes a random process since the temperature must be considered and thermal noise is involved. Further, varying grain structures of various granular media must also be taken into account to obtain correct statistics for the final read-back signal. Hence, it requires many repetitions of the write process to investigate the mean signal as well as the noise. This work presents a method that improves the statistical evaluation of the whole recording process. The idea is to avoid writing the magnetization to one of its binary states. Instead, we assign each grain its probability of occupying one of its stable states, which can be calculated in advance in terms of a switching probability phase diagram. In the read-back process, we combine the probabilities to calculate a mean signal and its variance. Afterwards, repetitions on different media lead to the final read-back signal. Using a recording example, we show that the statistical behavior of the evaluated signal-to-noise ratio can be significantly improved by applying this probability mapping method, while the computational effort remains low.
△ Less
Submitted 25 November, 2019;
originally announced November 2019.
-
Hybrid FFT algorithm for fast demagnetization field calculations on non-equidistant magnetic layers
Authors:
Paul Heistracher,
Florian Bruckner,
Claas Abert,
Christoph Vogler,
Dieter Suess
Abstract:
In micromagnetic simulations, the demagnetization field is by far the computationally most expensive field component and often a limiting factor in large multilayer systems. We present an exact method to calculate the demagnetization field of magnetic layers with arbitrary thicknesses. In this approach we combine the widely used fast-Fourier-transform based circular convolution method with an expl…
▽ More
In micromagnetic simulations, the demagnetization field is by far the computationally most expensive field component and often a limiting factor in large multilayer systems. We present an exact method to calculate the demagnetization field of magnetic layers with arbitrary thicknesses. In this approach we combine the widely used fast-Fourier-transform based circular convolution method with an explicit convolution using a generalized form of the Newell formulas. We implement the method both for central processors and graphics processors and find that significant speedups for irregular multilayer geometries can be achieved. Using this method we optimize the geometry of a magnetic random-access memory cell by varying a single specific layer thickness and simulate a hysteresis curve to determine the resulting switching field.
△ Less
Submitted 15 October, 2019;
originally announced October 2019.
-
Write head design for effective curvature reduction in heat-assisted magnetic recording by topology optimization
Authors:
Olivia Muthsam,
Christoph Vogler,
Florian Bruckner,
Dieter Suess
Abstract:
The reduction of the transition curvature of written bits in heat-assisted magnetic recording (HAMR) is expected to play an important role for the future areal density increase of hard disk drives. Recently a write head design with flipped write and return poles was proposed. In this design a large spatial field gradient of the write head was the key to significantly reduce the transition curvatur…
▽ More
The reduction of the transition curvature of written bits in heat-assisted magnetic recording (HAMR) is expected to play an important role for the future areal density increase of hard disk drives. Recently a write head design with flipped write and return poles was proposed. In this design a large spatial field gradient of the write head was the key to significantly reduce the transition curvature. In this work we optimized the write pole of a heat-assisted magnetic recording head in order to produce large field gradients as well as large fields in the region of the heat pulse. This is done by topology optimization. The simulations are performed with dolfin-adjoint. For the maximum field gradients of $8.1\,$mT/nm, $8.6\,$mT/nm and $11.8\,$mT/nm, locally resolved footprints of an FePt like hard magnetic recording medium are computed with a coarse-grained Landau-Lifshitz-Bloch (LLB) model and the resulting transition curvature is analysed. Additional simulations with a bilayer structure with $50\%$ hard and $50\%$ soft magnetic material are computed. The results show that for both recording media, the optimized head design does not lead to any significant improvement of the written track. Thus, we analyse the transition curvature for the optimized write heads theoretically with an effective recording time window (ERTW) model. Moreover, we check how higher field gradients influence the curvature reduction. The results show that a simple optimization of the conventional head design design is not sufficient for effective curvature reduction. Instead, new head concepts will be needed to reduce transition curvature.
△ Less
Submitted 30 July, 2019;
originally announced July 2019.
-
Improving the Signal-to-noise Ratio for Heat-Assisted Magnetic Recording by Optimizing a High/Low Tc bilayer structure
Authors:
Olivia Muthsam,
Florian Slanovc,
Christoph Vogler,
Dieter Suess
Abstract:
We optimize the recording medium for heat-assisted magnetic recording by using a high/low $T_{\mathrm{c}}$ bilayer structure to reduce AC and DC noise. Compared to a former work, small Gilbert damping $α=0.02$ is considered for the FePt like hard magnetic material. Atomistic simulations are performed for a cylindrical recording grain with diameter $d=5\,$nm and height $h=8\,$nm. Different soft mag…
▽ More
We optimize the recording medium for heat-assisted magnetic recording by using a high/low $T_{\mathrm{c}}$ bilayer structure to reduce AC and DC noise. Compared to a former work, small Gilbert damping $α=0.02$ is considered for the FePt like hard magnetic material. Atomistic simulations are performed for a cylindrical recording grain with diameter $d=5\,$nm and height $h=8\,$nm. Different soft magnetic material compositions are tested and the amount of hard and soft magnetic material is optimized. The results show that for a soft magnetic material with $α_{\mathrm{SM}}=0.1$ and $J_{ij,\mathrm{SM}}=7.72\times 10^{-21}\,$J/link a composition with $50\%$ hard and $50\%$ soft magnetic material leads to the best results. Additionally, we analyse how much the areal density can be improved by using the optimized bilayer structure compared to the pure hard magnetic recording material. It turns out that the optimized bilayer design allows an areal density that is $1\,$Tb/in$^2$ higher than that of the pure hard magnetic material while obtaining the same SNR.
△ Less
Submitted 11 July, 2019;
originally announced July 2019.
-
The superior role of the Gilbert damping on the signal-to-noise ratio in heat-assisted magnetic recording
Authors:
Olivia Muthsam,
Florian Slanovc,
Christoph Vogler,
Dieter Suess
Abstract:
In magnetic recording the signal-to-noise ratio (SNR) is a good indicator for the quality of written bits. However, a priori it is not clear which parameters have the strongest influence on the SNR. In this work, we investigate the role of the Gilbert damping on the SNR. Grains consisting of FePt like hard magnetic material with two different grain sizes $d_1=5\,$nm and $d_2=7\,$nm are considered…
▽ More
In magnetic recording the signal-to-noise ratio (SNR) is a good indicator for the quality of written bits. However, a priori it is not clear which parameters have the strongest influence on the SNR. In this work, we investigate the role of the Gilbert damping on the SNR. Grains consisting of FePt like hard magnetic material with two different grain sizes $d_1=5\,$nm and $d_2=7\,$nm are considered and simulations of heat-assisted magnetic recording (HAMR) are performed with the atomistic simulation program VAMPIRE. The simulations display that the SNR saturates for damping constants larger or equal than 0.1. Additionally, we can show that the Gilbert damping together with the bit length have a major effect on the SNR whereas other write head and material parameters only have a minor relevance on the SNR.
△ Less
Submitted 24 September, 2019; v1 submitted 10 July, 2019;
originally announced July 2019.
-
Systematic parameterization of heat-assisted magnetic recording switching probabilities and the consequences for the resulting SNR
Authors:
Florian Slanovc,
Christoph Vogler,
Olivia Muthsam,
Dieter Suess
Abstract:
The signal-to-noise ratio (SNR) of a bit series written with heat-assisted magnetic recording (HAMR) on granular media depends on a large number of different parameters. The choice of material properties is essential for the obtained switching probabilities of single grains and therefore for the written bits' quality in terms of SNR. Studies where the effects of different material compositions on…
▽ More
The signal-to-noise ratio (SNR) of a bit series written with heat-assisted magnetic recording (HAMR) on granular media depends on a large number of different parameters. The choice of material properties is essential for the obtained switching probabilities of single grains and therefore for the written bits' quality in terms of SNR. Studies where the effects of different material compositions on transition jitter and the switching probability are evaluated were done, but it is not obvious, how significant those improvements will finally change the received SNR. To investigate that influence, we developed an analytical model of the switching probability phase diagram, which contains independent parameters for, inter alia, transition width, switching probability and curvature. Different values lead to corresponding bit patterns on granular media, where a reader model detects the resulting signal, which is finally converted to a parameter dependent SNR value. For grain diameters between 4 and 8nm, we show an increase of ~10dB for bit lengths between 4 and 12nm, an increase of ~9dB for maximum switching probabilities between 0.64 and 1.00, a decrease of ~5dB for down-track-jitter parameters between 0 and 4nm and an increase of ~1dB for reduced bit curvature. Those results are furthermore compared to the theoretical formulas for the SNR. We obtain a good agreement, even though we show slight deviations.
△ Less
Submitted 8 July, 2019;
originally announced July 2019.
-
Large Scale Finite-Element Simulation of Micromagnetic Thermal Noise
Authors:
Florian Bruckner,
Massimiliano d'Aquino,
Claudio Serpico,
Claas Abert,
Christoph Vogler,
Dieter Suess
Abstract:
An efficient method for the calculation of ferromagnetic resonant modes of magnetic structures is presented. Finite-element discretization allows flexible geometries and location dependent material parameters. The resonant modes can be used for a semi-analytical calculation of the power spectral density of the thermal white-noise, which is relevant for many sensor applications. The proposed method…
▽ More
An efficient method for the calculation of ferromagnetic resonant modes of magnetic structures is presented. Finite-element discretization allows flexible geometries and location dependent material parameters. The resonant modes can be used for a semi-analytical calculation of the power spectral density of the thermal white-noise, which is relevant for many sensor applications. The proposed method is validated by comparing the noise spectrum of a nano-disk with time-domain simulations.
△ Less
Submitted 20 June, 2018;
originally announced June 2018.
-
GPU Accelerated Atomistic Energy Barrier Calculations of Skyrmion Annihilations
Authors:
Paul Heistracher,
Claas Abert,
Florian Bruckner,
Christoph Vogler,
Dieter Suess
Abstract:
We present GPU accelerated simulations to calculate the annihilation energy of magnetic skyrmions in an atomistic spin model considering dipole-dipole, exchange, uniaxial-anisotropy and Dzyaloshinskii-Moriya interactions using the simplified string method. The skyrmion annihilation energy is directly related to its thermal stability and is a key measure for the applicability of magnetic skyrmions…
▽ More
We present GPU accelerated simulations to calculate the annihilation energy of magnetic skyrmions in an atomistic spin model considering dipole-dipole, exchange, uniaxial-anisotropy and Dzyaloshinskii-Moriya interactions using the simplified string method. The skyrmion annihilation energy is directly related to its thermal stability and is a key measure for the applicability of magnetic skyrmions to storage and logic devices. We investigate annihilations mediated by Bloch points as well as annihilations via boundaries for various interaction energies. Both processes show similar behaviour, with boundary annihilations resulting in slightly smaller energy barriers than Bloch point annihilations.
△ Less
Submitted 23 October, 2018; v1 submitted 19 April, 2018;
originally announced April 2018.
-
Stochastic ferrimagnetic Landau-Lifshitz-Bloch equation for finite magnetic structures
Authors:
Christoph Vogler,
Claas Abert,
Florian Bruckner,
Dieter Suess
Abstract:
Precise modeling of the magnetization dynamics of nanoparticles with finite size effects at fast varying temperatures is a computationally challenging task. Based on the Landau-Lifshitz-Bloch (LLB) equation we derive a coarse grained model for disordered ferrimagnets, which is both fast and accurate. First, we incorporate stochastic fluctuations to the existing ferrimagnetic LLB equation. Further,…
▽ More
Precise modeling of the magnetization dynamics of nanoparticles with finite size effects at fast varying temperatures is a computationally challenging task. Based on the Landau-Lifshitz-Bloch (LLB) equation we derive a coarse grained model for disordered ferrimagnets, which is both fast and accurate. First, we incorporate stochastic fluctuations to the existing ferrimagnetic LLB equation. Further, we derive a thermodynamic expression for the temperature dependent susceptibilities, which is essential to model finite size effects. Together with the zero field equilibrium magnetization the susceptibilities are used in the stochastic ferrimagnetic LLB to simulate a $5\times10$ nm$^2$ ferrimagnetic GdFeCo particle with 70 % FeCo and 30 % Gd under various external applied fields and heat pulses. The obtained trajectories agree well with those of an atomistic model, which solves the stochastic Landau-Lifshitz-Gilbert equation for each atom. Additionally, we derive an expression for the intergrain exchange field which couple the ferromagnetic sublattices of a ferrimagnet. A comparison of the magnetization dynamics obtained from this simpler model with those of the ferrimagnetic LLB equation shows a perfect agreement.
△ Less
Submitted 5 April, 2018;
originally announced April 2018.
-
Contactless and absolute linear displacement detection based upon 3D printed magnets combined with passive radio-frequency identification
Authors:
Roman Windl,
Claas Abert,
Florian Bruckner,
Christian Huber,
Christoph Vogler,
Herbert Weitensfelder,
Dieter Suess
Abstract:
Within this work a passive and wireless magnetic sensor, to monitor linear displacements is proposed. We exploit recent advances in 3D printing and fabricate a polymer bonded magnet with a spatially linear magnetic field component corresponding to the length of the magnet. Regulating the magnetic compound fraction during printing allows specific shaping of the magnetic field distribution. A giant…
▽ More
Within this work a passive and wireless magnetic sensor, to monitor linear displacements is proposed. We exploit recent advances in 3D printing and fabricate a polymer bonded magnet with a spatially linear magnetic field component corresponding to the length of the magnet. Regulating the magnetic compound fraction during printing allows specific shaping of the magnetic field distribution. A giant magnetoresistance magnetic field sensor is combined with a radio-frequency identification tag in order to passively monitor the exerted magnetic field of the printed magnet. Due to the tailored magnetic field, a displacement of the magnet with respect to the sensor can be detected within the sub-mm regime. The sensor design provides good flexibility by controlling the 3D printing process according to application needs. Absolute displacement detection using low cost components and providing passive operation, long term stability and longevity renders the proposed sensor system ideal for structural health monitoring applications.
△ Less
Submitted 13 September, 2017;
originally announced September 2017.
-
A fast finite-difference algorithm for topology optimization of permanent magnets
Authors:
Claas Abert,
Christian Huber,
Florian Bruckner,
Christoph Vogler,
Gregor Wautischer,
Dieter Suess
Abstract:
We present a finite-difference method for the topology optimization of permanent magnets that is based on the FFT accelerated computation of the stray-field. The presented method employs the density approach for topology optimization and uses an adjoint method for the gradient computation. Comparsion to various state-of-the-art finite-element implementations shows a superior performance and accura…
▽ More
We present a finite-difference method for the topology optimization of permanent magnets that is based on the FFT accelerated computation of the stray-field. The presented method employs the density approach for topology optimization and uses an adjoint method for the gradient computation. Comparsion to various state-of-the-art finite-element implementations shows a superior performance and accuracy. Moreover, the presented method is very flexible and easy to implement due to various preexisting FFT stray-field implementations that can be used.
△ Less
Submitted 31 July, 2017;
originally announced July 2017.
-
AC noise reduction based on exchange coupled grains for heat-assisted-magnetic recording: The effect of an FeRh interlayer
Authors:
Christoph Vogler,
Claas Abert,
Florian Bruckner,
Dieter Suess
Abstract:
High storage density and high data rate are two of the most desired properties of modern hard disk drives. Heat-assisted magnetic recording (HAMR) is believed to achieve both. Recording media, consisting of exchange coupled grains with a high and a low $T_{\mathrm{C}}$ part, were shown to have low DC noise, but increased AC noise, compared to hard magnetic single phase grains, like FePt [1]. In th…
▽ More
High storage density and high data rate are two of the most desired properties of modern hard disk drives. Heat-assisted magnetic recording (HAMR) is believed to achieve both. Recording media, consisting of exchange coupled grains with a high and a low $T_{\mathrm{C}}$ part, were shown to have low DC noise, but increased AC noise, compared to hard magnetic single phase grains, like FePt [1]. In this work we extensively investigate the influence of an FeRh interlayer on the magnetic noise in exchange coupled grains. We find an optimal grain design that reduces the jitter in down-track direction by up to 30 % and in off-track direction by up to 50 %, depending on the head velocity, compared to the same structures without FeRh. Further, the mechanisms causing this jitter reduction are demonstrated. Additionally, we show that for ultrashort heat pulses and low write temperatures the switching time distribution of the analyzed grain structure is reduced by a factor of four, compared to the same structure without FeRh layer. This feature could be interesting for HAMR with a pulsed laser spot and could resume the discussion about this HAMR technique.
△ Less
Submitted 7 June, 2017;
originally announced June 2017.
-
Efficiently reducing transition curvature in heat-assisted magnetic recording with state-of-the-art write heads
Authors:
Christoph Vogler,
Claas Abert,
Florian Bruckner,
Dieter Suess
Abstract:
The curvature of bit transitions on granular media is a serious problem for the read-back process. We address this fundamental issue and propose a possibility to efficiently reduce transition curvatures with state-of-the-art heat-assisted magnetic recording (HAMR) heads. We compare footprints of conventional with those of the proposed head design on different media, consisting of exchange coupled…
▽ More
The curvature of bit transitions on granular media is a serious problem for the read-back process. We address this fundamental issue and propose a possibility to efficiently reduce transition curvatures with state-of-the-art heat-assisted magnetic recording (HAMR) heads. We compare footprints of conventional with those of the proposed head design on different media, consisting of exchange coupled and single phase grains. Additionally, we investigate the impact of various recording parameters, like the full width at half maximum (FWHM) of the applied heat pulse and the coercivity gradient near the write temperature of the recording grains. The footprints are calculated with a coarse grained model, based on the Landau-Lifshitz-Bloch (LLB) equation. The presented simulations show a transition curvature reduction of up to 40 %, in the case of a medium with exchange coupled grains and a heat pulse with a FWHM of 40 nm. We further give the reason for the straightening of the bit transitions, by means of basic considerations with regard to the effective recording time window (ERTW) of the write process. Besides the transition curvature reduction the proposed head design yields an improvement of the transition jitter in both down-track and off-track direction.
△ Less
Submitted 2 March, 2017;
originally announced March 2017.
-
Back hopping in spin-transfer-torque devices, possible origin and counter measures
Authors:
Claas Abert,
Hossein Sepehri-Amin,
Florian Bruckner,
Christoph Vogler,
Masamitsu Hayashi,
Dieter Suess
Abstract:
The effect of undesirable high-frequency free-layer switching in magnetic multilayer systems, referred to as back hopping, is investigated by means of the spin-diffusion model. A possible origin of the back-hopping effect is found to be the destabilization of the pinned layer which leads to perpetual switching of both layers. The influence of different material parameters on the critical switching…
▽ More
The effect of undesirable high-frequency free-layer switching in magnetic multilayer systems, referred to as back hopping, is investigated by means of the spin-diffusion model. A possible origin of the back-hopping effect is found to be the destabilization of the pinned layer which leads to perpetual switching of both layers. The influence of different material parameters on the critical switching currents for the free and pinned layer is obtained by micromagnetic simulations. It is found that the choice of a free-layer material with low polarization $β$ and saturation magnetization $M_s$, and a pinned-layer material with high $β$ and $M_s$ leads to a low free-layer critical current and a high pinned-layer critical current and hence reduces the likelihood of back hopping. While back hopping was observed in various types of devices, there are only few experiments that exhibit this effect in perpendicularly magnetized systems. However, our simulations suggest, that this is likely to change due to loss of pinned-layer anisotropy when decreasing device sizes.
△ Less
Submitted 9 June, 2017; v1 submitted 21 February, 2017;
originally announced February 2017.
-
Topology Optimized and 3D Printed Polymer Bonded Permanent Magnets for a Predefined External Field
Authors:
Christian Huber,
Claas Abert,
Florian Bruckner,
Martin Groenefeld,
Iulian Teliban,
Christoph Vogler,
Dieter Suess
Abstract:
Topology optimization offers great opportunities to design permanent magnetic systems that have specific external field characteristics. Additive manufacturing of polymer bonded magnets with an end-user 3D printer can be used to manufacture permanent magnets with structures that have been difficult or impossible to manufacture previously. This work combines these two powerful methods to design and…
▽ More
Topology optimization offers great opportunities to design permanent magnetic systems that have specific external field characteristics. Additive manufacturing of polymer bonded magnets with an end-user 3D printer can be used to manufacture permanent magnets with structures that have been difficult or impossible to manufacture previously. This work combines these two powerful methods to design and manufacture permanent magnetic system with specific properties. The topology optimization framework is simple, fast, and accurate. It can be also used for reverse engineering of permanent magnets in order to find the topology from field measurements. Furthermore, a magnetic system that generate a linear external field above the magnet is presented. With a volume constraint the amount of magnetic material can be minimized without losing performance. Simulations and measurements of the printed system show a very good agreement.
△ Less
Submitted 7 February, 2017;
originally announced February 2017.
-
Significant reduction of critical currents in MRAM designs using dual free layer with perpendicular and in-plane anisotropy
Authors:
Dieter Suess,
Christoph Vogler,
Florian Bruckner,
Hossein Sepehri-Amin,
Claas Abert
Abstract:
One essential feature in MRAM cells is the spin torque efficiency, which describes the ratio of the critical switching current to the energy barrier. Within this paper it is reported that the spin torque efficiency can be improved by a factor of 3.2 by the use a of dual free layer device, which consists of one layer with perpendicular crystalline anisotropy and a second layer with in-plane crystal…
▽ More
One essential feature in MRAM cells is the spin torque efficiency, which describes the ratio of the critical switching current to the energy barrier. Within this paper it is reported that the spin torque efficiency can be improved by a factor of 3.2 by the use a of dual free layer device, which consists of one layer with perpendicular crystalline anisotropy and a second layer with in-plane crystalline anisotropy. Detailed simulations solving the spin transport equations simultaneously with the micromagnetics equation were performed in order to understand the origin of the switching current reduction by a factor of 4 for the dual layer structure compared to a single layer structure. The main reason could be attributed to an increased spin accumulation within the free layer due to the dynamical tilting of the magnetization within the in-plane region of the dual free layer.
△ Less
Submitted 14 February, 2017; v1 submitted 3 February, 2017;
originally announced February 2017.
-
3D Printing of Polymer Bonded Rare-Earth Magnets With a Variable Magnetic Compound Density for a Predefined Stray Field
Authors:
Christian Huber,
Claas Abert,
Florian Bruckner,
Martin Groenefeld,
Stephan Schuschnigg,
Iulian Teliban,
Christoph Vogler,
Gregor Wautischer,
Roman Windl,
Dieter Suess
Abstract:
Additive manufacturing of polymer bonded magnets is a recently developed technique, for single-unit production, and for structures that have been impossible to manufacture previously. Also new possibilities to create a specific stray field around the magnet are triggered. The current work presents a method to 3D print polymer bonded magnets with a variable magnetic compound density distribution. A…
▽ More
Additive manufacturing of polymer bonded magnets is a recently developed technique, for single-unit production, and for structures that have been impossible to manufacture previously. Also new possibilities to create a specific stray field around the magnet are triggered. The current work presents a method to 3D print polymer bonded magnets with a variable magnetic compound density distribution. A low-cost, end-user 3D printer with a mixing extruder is used to mix permanent magnetic filaments with pure PA12 filaments. The magnetic filaments are compounded, extruded, and characterized for the printing process. To deduce the quality of the manufactured magnets with a variable compound density, an inverse stray field framework is used. The effectiveness of the printing process and the simulation method is shown. It can also be used to manufacture magnets that produce a predefined stray field in a given region. Examples for sensor applications are presented. This setup and simulation framework allows the design and manufacturing of polymer bonded permanent magnets which are impossible to create with conventional methods.
△ Less
Submitted 26 January, 2017;
originally announced January 2017.
-
Field- and damping-like spin-transfer torque in magnetic multilayers
Authors:
Claas Abert,
Hossein Sepehri-Amin,
Florian Bruckner,
Christoph Vogler,
Masamitsu Hayashi,
Dieter Suess
Abstract:
We investigate the spin-transfer torque in a magnetic multilayer structure by means of a spin-diffusion model. The torque in the considered system, consisting of two magnetic layers separated by a conducting layer, is caused by a perpendicular-to-plane current. We compute the strength of the field-like and the damping-like torque for different material parameters and geometries. Our studies sugges…
▽ More
We investigate the spin-transfer torque in a magnetic multilayer structure by means of a spin-diffusion model. The torque in the considered system, consisting of two magnetic layers separated by a conducting layer, is caused by a perpendicular-to-plane current. We compute the strength of the field-like and the damping-like torque for different material parameters and geometries. Our studies suggest that the field-like torque highly depends on the exchange coupling strength of the itinerant electrons with the magnetization both in the pinned and the free layer. While a low coupling leads to very high field-like torques, a high coupling leads to low or even negative field-like torques. The dependence of the different torque terms on system parameters is considered very important for the development of applications such as STT MRAM and spin-torque oscillators.
△ Less
Submitted 1 December, 2016;
originally announced December 2016.
-
Solving Large-Scale Inverse Magnetostatic Problems using the Adjoint Method
Authors:
Florian Bruckner,
Claas Abert,
Gregor Wautischer,
Christian Huber,
Christoph Vogler,
Michael Hinze,
Dieter Suess
Abstract:
An efficient algorithm for the reconstruction of the magnetization state within magnetic components is presented. The occurring inverse magnetostatic problem is solved by means of an adjoint approach, based on the Fredkin-Koehler method for the solution of the forward problem. Due to the use of hybrid FEM-BEM coupling combined with matrix compression techniques the resulting algorithm is well suit…
▽ More
An efficient algorithm for the reconstruction of the magnetization state within magnetic components is presented. The occurring inverse magnetostatic problem is solved by means of an adjoint approach, based on the Fredkin-Koehler method for the solution of the forward problem. Due to the use of hybrid FEM-BEM coupling combined with matrix compression techniques the resulting algorithm is well suited for large-scale problems. Furthermore the reconstruction of the magnetization state within a permanent magnet is demonstrated.
△ Less
Submitted 31 August, 2016;
originally announced September 2016.
-
A self-consistent spin-diffusion model for micromagnetics
Authors:
Claas Abert,
Michele Ruggeri,
Florian Bruckner,
Christoph Vogler,
Aurelien Manchon,
Dirk Praetorius,
Dieter Suess
Abstract:
We propose a three-dimensional micromagnetic model that dynamically solves the Landau-Lifshitz-Gilbert equation coupled to the full spin-diffusion equation. In contrast to previous methods, we solve for the magnetization dynamics and the electric potential in a self-consistent fashion. This treatment allows for an accurate description of magnetization dependent resistance changes. Moreover, the pr…
▽ More
We propose a three-dimensional micromagnetic model that dynamically solves the Landau-Lifshitz-Gilbert equation coupled to the full spin-diffusion equation. In contrast to previous methods, we solve for the magnetization dynamics and the electric potential in a self-consistent fashion. This treatment allows for an accurate description of magnetization dependent resistance changes. Moreover, the presented algorithm describes both spin accumulation due to smooth magnetization transitions and due to material interfaces as in multilayer structures. The model and its finite-element implementation are validated by current driven motion of a magnetic vortex structure. In a second experiment, the resistivity of a magnetic multilayer structure in dependence of the tilting angle of the magnetization in the different layers is investigated. Both examples show good agreement with reference simulations and experiments respectively.
△ Less
Submitted 16 September, 2016; v1 submitted 17 December, 2015;
originally announced December 2015.
-
Macroscopic Simulation of Isotropic Permanent Magnets
Authors:
Florian Bruckner,
Claas Abert,
Christoph Vogler,
Frank Heinrichs,
Armin Satz,
Udo Ausserlechner,
Gernot Binder,
Helmut Koeck,
Dieter Suess
Abstract:
Accurate simulations of isotropic permanent magnets require to take the magnetization process into account and consider the anisotropic, nonlinear, and hysteretic material behaviour near the saturation configuration. An efficient method for the solution of the magnetostatic Maxwell equations including the description of isotropic permanent magnets is presented. The algorithm can easily be implemen…
▽ More
Accurate simulations of isotropic permanent magnets require to take the magnetization process into account and consider the anisotropic, nonlinear, and hysteretic material behaviour near the saturation configuration. An efficient method for the solution of the magnetostatic Maxwell equations including the description of isotropic permanent magnets is presented. The algorithm can easily be implemented on top of existing finite element methods and does not require a full characterization of the hysteresis of the magnetic material. Strayfield measurements of an isotropic permanent magnet and simulation results are in good agreement and highlight the importance of a proper description of the isotropic material.
△ Less
Submitted 2 July, 2015;
originally announced July 2015.
-
Calculating thermal stability and attempt frequency of advanced recording structures without free parameters
Authors:
Christoph Vogler,
Florian Bruckner,
Dieter Suess,
Christoph Dellago
Abstract:
Ensuring a permanent increase of magnetic storage densities is one of the main challenges in magnetic recording. Conventional approaches based on single phase grains are not suitable to achieve this goal, because their grain volume is limited due to the superparamagnetic limit. Grains with graded anisotropy are the most promising candidates to overcome this limit, providing magnetic memory bits wi…
▽ More
Ensuring a permanent increase of magnetic storage densities is one of the main challenges in magnetic recording. Conventional approaches based on single phase grains are not suitable to achieve this goal, because their grain volume is limited due to the superparamagnetic limit. Grains with graded anisotropy are the most promising candidates to overcome this limit, providing magnetic memory bits with small volumes, low coercivity and high thermal stability at the same time. Combining micromagnetic simulations with forward flux sampling (FFS), a computational method for rare events that has been recently applied to the magnetic nanostructures, we have determined thermal escape rates and attempt frequencies of a graded media grain and two single phase grains of the same geometry. We find that graded anisotropy can increase the thermal stability of a grain by 12 orders of magnitudes from tens of milliseconds to centuries without changing the coercive field.
△ Less
Submitted 16 December, 2014;
originally announced December 2014.
-
A full-fledged micromagnetic code in less than 70 lines of NumPy
Authors:
Claas Abert,
Florian Bruckner,
Christoph Vogler,
Roman Windl,
Raphael Thanhoffer,
Dieter Suess
Abstract:
We present a complete micromagnetic finite-difference code in less than 70 lines of Python. The code makes largely use of the NumPy library and computes the exchange field by finite differences and the demagnetization field with a fast convolution algorithm. Since the magnetization in finite-difference micromagnetics is represented by a multi-dimensional array and the NumPy library features a rich…
▽ More
We present a complete micromagnetic finite-difference code in less than 70 lines of Python. The code makes largely use of the NumPy library and computes the exchange field by finite differences and the demagnetization field with a fast convolution algorithm. Since the magnetization in finite-difference micromagnetics is represented by a multi-dimensional array and the NumPy library features a rich interface for this data structure, the presented code is a good starting point for the development of novel algorithms.
△ Less
Submitted 27 November, 2014; v1 submitted 26 November, 2014;
originally announced November 2014.
-
A three-dimensional spin-diffusion model for micromagnetics
Authors:
Claas Abert,
Michele Ruggeri,
Florian Bruckner,
Christoph Vogler,
Gino Hrkac,
Dirk Praetorius,
Dieter Suess
Abstract:
We implement a finite-element scheme that solves the Landau-Lifshitz-Gilbert equation coupled to a diffusion equation accounting for spin-polarized currents. The latter solves for the spin accumulation not only in magnetic materials but also in nonmagnetic conductors. The presented method incorporates the model by Slonczewski for the description of spin torque in magnetic multilayers as well as th…
▽ More
We implement a finite-element scheme that solves the Landau-Lifshitz-Gilbert equation coupled to a diffusion equation accounting for spin-polarized currents. The latter solves for the spin accumulation not only in magnetic materials but also in nonmagnetic conductors. The presented method incorporates the model by Slonczewski for the description of spin torque in magnetic multilayers as well as the model of Zhang and Li for the description of current driven domain-wall motion. Furthermore it is able to do both resolve the time evolution of the spin accumulation or treat it in an adiabatic fashion by the choice of sufficiently large time steps.
△ Less
Submitted 18 May, 2015; v1 submitted 22 October, 2014;
originally announced October 2014.
-
Landau-Lifshitz-Bloch equation for exchange coupled grains
Authors:
Christoph Vogler,
Claas Abert,
Florian Bruckner,
Dieter Suess
Abstract:
Heat assisted recording is a promising technique to further increase the storage density in hard disks. Multilayer recording grains with graded Curie temperature is discussed to further assist the write process. Describing the correct magnetization dynamics of these grains, from room temperature to far above the Curie point, during a write process is required for the calculation of bit error rates…
▽ More
Heat assisted recording is a promising technique to further increase the storage density in hard disks. Multilayer recording grains with graded Curie temperature is discussed to further assist the write process. Describing the correct magnetization dynamics of these grains, from room temperature to far above the Curie point, during a write process is required for the calculation of bit error rates. We present a coarse grained approach based on the Landau-Lifshitz-Bloch (LLB) equation to model exchange coupled grains with low computational effort. The required temperature dependent material properties such as the zero-field equilibrium magnetization as well as the parallel and normal susceptibilities are obtained by atomistic Landau-Lifshitz-Gilbert (LLG) simulations. Each grain is described with one magnetization vector. In order to mimic the atomistic exchange interaction between the grains a special treatment of the exchange field in the coarse grained approach is presented.
△ Less
Submitted 27 October, 2014; v1 submitted 22 October, 2014;
originally announced October 2014.