-
Impact of the gas choice and the geometry on the breakdown limits in Micromegas detectors
Authors:
P. Gasik,
T. Waldmann,
L. Fabbietti,
T. Klemenz,
L. Lautner,
B. Ulukutlu
Abstract:
In this study we investigate the stability limits of Micromegas detectors upon irradiation with alpha particles. The results are obtained with meshes with different optical transparency and geometry of wires. The measurements are performed in Ar- and Ne- based mixtures with different CO$_2$ content. We observe that the breakdown limit strongly depends on the gas and that a higher amount of quenche…
▽ More
In this study we investigate the stability limits of Micromegas detectors upon irradiation with alpha particles. The results are obtained with meshes with different optical transparency and geometry of wires. The measurements are performed in Ar- and Ne- based mixtures with different CO$_2$ content. We observe that the breakdown limit strongly depends on the gas and that a higher amount of quencher in the mixture does not necessarily correlate with higher stability. In addition, we observe discharge probability scaling with the wire pitch. This suggests that a Micromegas mesh cell can be treated as an independent amplification unit, similar to a hole in a GEM foil. The outcome of these studies provides valuable input for further optimization of MPGD detectors, multi-layer stacks in particular.
△ Less
Submitted 12 June, 2023;
originally announced June 2023.
-
Systematic investigation of critical charge limits in Thick GEMs
Authors:
P. Gasik,
L. Lautner,
L. Fabbietti,
H. Fribert,
T. Klemenz,
A. Mathis,
B. Ulukutlu,
T. Waldmann
Abstract:
We present discharge probability studies performed with a single Thick Gas Electron Multiplier (THGEM) irradiated with alpha particles in Ar-CO$_2$ and Ne-CO$_2$ mixtures. We observe a clear dependency of the discharge stability on the noble gas and quencher content pointing to lighter gases being more stable against the development of streamer discharges. A detailed comparison of the measurements…
▽ More
We present discharge probability studies performed with a single Thick Gas Electron Multiplier (THGEM) irradiated with alpha particles in Ar-CO$_2$ and Ne-CO$_2$ mixtures. We observe a clear dependency of the discharge stability on the noble gas and quencher content pointing to lighter gases being more stable against the development of streamer discharges. A detailed comparison of the measurements with Geant4 simulations allowed us to extract the critical charge value leading to the formation of a spark in a THGEM hole, which is found to be within the range of 3-7$\times10^6$ electrons, depending on the gas mixture.
Our experimental findings are compared to previous GEM results. We show that the discharge probability of THGEMs exceeds the one measured with GEMs by orders of magnitude. This can be explained with simple geometrical considerations, where primary ionization is collected by a lower number of holes available in a THGEM structure, reaching higher primary charge densities and thus increasing the probability of a spark occurrence. However, we show that the critical charge limits are similar for both amplification structures.
△ Less
Submitted 20 January, 2023; v1 submitted 6 April, 2022;
originally announced April 2022.
-
New (TH)GEM coating materials characterised using spectroscopy methods
Authors:
B. Ulukutlu,
P. Gasik,
T. Waldmann,
L. Fabbietti,
T. Klemenz,
L. Lautner,
R. de Oliveira,
S. Williams
Abstract:
In this work GEM and single-hole Thick GEM structures, composed of different coating materials, are studied. The used foils incorporate conductive layers made of copper, aluminium, molybdenum, stainless steel, tungsten and tantalum. The main focus of the study is the determination of the material dependence of the formation of electrical discharges in GEM-based detectors. For this task, discharge…
▽ More
In this work GEM and single-hole Thick GEM structures, composed of different coating materials, are studied. The used foils incorporate conductive layers made of copper, aluminium, molybdenum, stainless steel, tungsten and tantalum. The main focus of the study is the determination of the material dependence of the formation of electrical discharges in GEM-based detectors. For this task, discharge probability measurements are conducted with several Thick GEM samples using a basic electronics readout chain. In addition to that, optical spectroscopy methods are employed to study the light emitted during discharges from the different foils. It is observed that the light spectra of GEMs include emission lines from the conductive layer material. This indicates the presence of the foil material in the discharge plasma after the initial spark. However, no lines associated with the coating material are observed while studying spark discharges induced in Thick GEMs. It is concluded that the conductive layer material does not play a substantial role in terms of stability against primary discharges. However, a strong material dependence is observed in the case of secondary discharge formation, pointing to molybdenum coating as the one providing increased stability.
△ Less
Submitted 5 November, 2021; v1 submitted 25 April, 2021;
originally announced April 2021.
