-
Workshop on a future muon program at FNAL
Authors:
S. Corrodi,
Y. Oksuzian,
A. Edmonds,
J. Miller,
H. N. Tran,
R. Bonventre,
D. N. Brown,
F. Meot,
V. Singh,
Y. Kolomensky,
S. Tripathy,
L. Borrel,
M. Bub,
B. Echenard,
D. G. Hitlin,
H. Jafree,
S. Middleton,
R. Plestid,
F. C. Porter,
R. Y. Zhu,
L. Bottura,
E. Pinsard,
A. M. Teixeira,
C. Carelli,
D. Ambrose
, et al. (68 additional authors not shown)
Abstract:
The Snowmass report on rare processes and precision measurements recommended Mu2e-II and a next generation muon facility at Fermilab (Advanced Muon Facility) as priorities for the frontier. The Workshop on a future muon program at FNAL was held in March 2023 to discuss design studies for Mu2e-II, organizing efforts for the next generation muon facility, and identify synergies with other efforts (e…
▽ More
The Snowmass report on rare processes and precision measurements recommended Mu2e-II and a next generation muon facility at Fermilab (Advanced Muon Facility) as priorities for the frontier. The Workshop on a future muon program at FNAL was held in March 2023 to discuss design studies for Mu2e-II, organizing efforts for the next generation muon facility, and identify synergies with other efforts (e.g., muon collider). Topics included high-power targetry, status of R&D for Mu2e-II, development of compressor rings, FFA and concepts for muon experiments (conversion, decays, muonium and other opportunities) at AMF. This document summarizes the workshop discussions with a focus on future R&D tasks needed to realize these concepts.
△ Less
Submitted 11 September, 2023;
originally announced September 2023.
-
Novel Materials and Concepts for Next-Generation High Power Target Applications
Authors:
Kavin Ammigan,
Sujit Bidhar,
Frederique Pellemoine,
Vitaly Pronskikh,
David Pushka,
Katsuya Yonehara,
Robert Zwaska,
Adrien Couet,
Michael Moorehead,
Taku Ishida,
Shunsuke Makimura,
Christopher Densham,
Michael Fitton,
Eric Harvey-Fishenden,
Tristan Davenne,
David Jenkins,
Peter Loveridge,
Joe O'Dell,
Chris Rogers,
Dan Wilcox,
Marco Calviani,
Simone Gilardoni,
Francois-Xavier Nuiry,
Antonio Perillo-Marcone,
Nathan Bultman
, et al. (14 additional authors not shown)
Abstract:
Novel beam-intercepting materials and targetry concepts are essential to improve the performance, reliability and operation lifetimes of next generation multi-megawatt (multi-MW) accelerator target facilities. The beam-intercepting materials and components must sustain an order-of-magnitude increase in particle beam intensities and are beyond the current state-of-the-art. With conventional materia…
▽ More
Novel beam-intercepting materials and targetry concepts are essential to improve the performance, reliability and operation lifetimes of next generation multi-megawatt (multi-MW) accelerator target facilities. The beam-intercepting materials and components must sustain an order-of-magnitude increase in particle beam intensities and are beyond the current state-of-the-art. With conventional materials already limiting the scope of experiments, it is crucial to investigate novel target materials, technologies and concepts that will satisfy the requirements and maximize the physics benefits of future energy and intensity frontier experiments. This paper provides an overview of the related targetry R&D required over the next 10 years to support and enable future high-power accelerator target facilities.
△ Less
Submitted 15 March, 2022;
originally announced March 2022.
-
Modeling Needs for High Power Target
Authors:
Charlotte Barbier,
Sujit Bidhar,
Marco Calviani,
Jeff Dooling,
Jian Gao,
Aaron Jacques,
Wei Lu,
Roberto Li Voti,
Frederique Pellemoine,
Justin Mach,
David Senor,
Fernando Sordo,
Izabela Szlufarska,
Joseph Tipton,
Dan Wilcox,
Drew Winder
Abstract:
The next generation of high power targets will use more complex geometries, novel materials, and new concepts (like flowing granular materials); however, the current numerical approaches will not be sufficient to converge towards a reliable target design that satisfies the physical requirements. We will discuss what can be improved in the next 10 years in target modeling to support high power (MW…
▽ More
The next generation of high power targets will use more complex geometries, novel materials, and new concepts (like flowing granular materials); however, the current numerical approaches will not be sufficient to converge towards a reliable target design that satisfies the physical requirements. We will discuss what can be improved in the next 10 years in target modeling to support high power (MW class) targets.
△ Less
Submitted 9 March, 2022;
originally announced March 2022.
-
Characterization and reduction of flow separation in jet pumps for laminar oscillatory flows
Authors:
Michael A. G. Timmer,
Joris P. Oosterhuis,
Simon Bühler,
Douglas Wilcox,
Theo H. van der Meer
Abstract:
A computational fluid dynamics model is used to predict the oscillatory flow through tapered cylindrical tube sections (jet pumps). The asymmetric shape of jet pumps results in a time-averaged pressure drop that can be used to suppress Gedeon streaming in closed-loop thermoacoustic devices. However, previous work has shown that flow separation in the diverging flow direction counteracts the time-a…
▽ More
A computational fluid dynamics model is used to predict the oscillatory flow through tapered cylindrical tube sections (jet pumps). The asymmetric shape of jet pumps results in a time-averaged pressure drop that can be used to suppress Gedeon streaming in closed-loop thermoacoustic devices. However, previous work has shown that flow separation in the diverging flow direction counteracts the time-averaged pressure drop. In this work, the characteristics of flow separation in jet pumps are identified and coupled with the observed jet pump performance. Furthermore, it is shown that the onset of flow separation can be shifted to larger displacement amplitudes by designs that have a smoother transition between the small opening and the tapered surface of the jet pump. These design alterations also reduce the duration of separated flow, resulting in more effective and robust jet pumps. To make the proposed jet pump designs more compact without reducing their performance, the minimum big opening radius that can be implemented before the local minor losses have an influence on the jet pump performance is investigated. To validate the numerical results, they are compared with experimental results for one of the proposed jet pump designs.
△ Less
Submitted 4 January, 2016;
originally announced January 2016.
-
Jet pumps for thermoacoustic applications: design guidelines based on a numerical parameter study
Authors:
Joris P. Oosterhuis,
Simon Bühler,
Douglas Wilcox,
Theo H. van der Meer
Abstract:
The oscillatory flow through tapered cylindrical tube sections (jet pumps) is characterized by a numerical parameter study. The shape of a jet pump results in asymmetric hydrodynamic end effects which cause a time-averaged pressure drop to occur under oscillatory flow conditions. Hence, jet pumps are used as streaming suppressors in closed-loop thermoacoustic devices. A two-dimensional axisymmetri…
▽ More
The oscillatory flow through tapered cylindrical tube sections (jet pumps) is characterized by a numerical parameter study. The shape of a jet pump results in asymmetric hydrodynamic end effects which cause a time-averaged pressure drop to occur under oscillatory flow conditions. Hence, jet pumps are used as streaming suppressors in closed-loop thermoacoustic devices. A two-dimensional axisymmetric computational fluid dynamics model is used to calculate the performance of a large number of conical jet pump geometries in terms of time-averaged pressure drop and acoustic power dissipation. The investigated geometrical parameters include the jet pump length, taper angle, waist diameter and waist curvature. In correspondence with previous work, four flow regimes are observed which characterize the jet pump performance and dimensionless parameters are introduced to scale the performance of the various jet pump geometries. The simulation results are compared to an existing quasi-steady theory and it is shown that this theory is only applicable in a small operation region. Based on the scaling parameters, an optimum operation region is defined and design guidelines are proposed which can be directly used for future jet pump design.
△ Less
Submitted 20 August, 2015;
originally announced August 2015.
-
A numerical investigation on the vortex formation and flow separation of the oscillatory flow in jet pumps
Authors:
Joris P. Oosterhuis,
Simon Bühler,
Douglas Wilcox,
Theo van der Meer
Abstract:
A two-dimensional computational fluid dynamics model is used to predict the oscillatory flow through a tapered cylindrical tube section (jet pump) placed in a larger outer tube. Due to the shape of the jet pump, there will exist an asymmetry in the hydrodynamic end effects which will cause a time-averaged pressure drop to occur that can be used to cancel Gedeon streaming in a closed-loop thermoaco…
▽ More
A two-dimensional computational fluid dynamics model is used to predict the oscillatory flow through a tapered cylindrical tube section (jet pump) placed in a larger outer tube. Due to the shape of the jet pump, there will exist an asymmetry in the hydrodynamic end effects which will cause a time-averaged pressure drop to occur that can be used to cancel Gedeon streaming in a closed-loop thermoacoustic device. The performance of two jet pump geometries with different taper angles is investigated. A specific time-domain impedance boundary condition is implemented in order to simulate traveling acoustic wave conditions. It is shown that by scaling the acoustic displacement amplitude to the jet pump dimensions, similar minor losses are observed independent of the jet pump geometry. Four different flow regimes are distinguished and the observed flow phenomena are related to the jet pump performance. The simulated jet pump performance is compared to an existing quasi-steady approximation which is shown to only be valid for small displacement amplitudes compared to the jet pump length.
△ Less
Submitted 30 March, 2015; v1 submitted 13 March, 2015;
originally announced March 2015.
-
Observation of Coherence in the Photosystem II Reaction Center
Authors:
Franklin D. Fuller,
Jie Pan,
S. Seckin Senlik,
Daniel E. Wilcox,
Jennifer P. Ogilvie
Abstract:
Photosynthesis powers life on our planet. The basic photosynthetic architecture comprises antenna complexes to harvest solar energy and reaction centers to convert the energy into a stable charge separated state. In oxygenic photosynthesis, the initial charge separation event occurs in the photosystem II reaction center; the only known natural enzyme that uses solar energy to split water. Energy t…
▽ More
Photosynthesis powers life on our planet. The basic photosynthetic architecture comprises antenna complexes to harvest solar energy and reaction centers to convert the energy into a stable charge separated state. In oxygenic photosynthesis, the initial charge separation event occurs in the photosystem II reaction center; the only known natural enzyme that uses solar energy to split water. Energy transfer and charge separation in photosynthesis are rapid and have high quantum efficiencies. Recently, nonlinear spectroscopic experiments have suggested that electronic coherence may play a role in energy transfer efficiency in antenna complexes. Here we report the observation of coherence in the photosystem II reaction center by two dimensional electronic spectroscopy. The frequencies of the observed coherences match exciton difference frequencies and/or known vibrational modes of the photosystem II reaction center. These observations raise questions about the possible role of electronic and/or vibrational coherence in the fundamental charge separation process in oxygenic photosynthesis.
△ Less
Submitted 3 October, 2013;
originally announced October 2013.
-
The EUROnu Project
Authors:
T. R. Edgecock,
O. Caretta,
T. Davenne,
C. Densham,
M. Fitton,
D. Kelliher,
P. Loveridge,
S. Machida,
C. Prior,
C. Rogers,
M. Rooney,
J. Thomason,
D. Wilcox,
E. Wildner,
I. Efthymiopoulos,
R. Garoby,
S. Gilardoni,
C. Hansen,
E. Benedetto,
E. Jensen,
A. Kosmicki,
M. Martini,
J. Osborne,
G. Prior,
T. Stora
, et al. (146 additional authors not shown)
Abstract:
The EUROnu project has studied three possible options for future, high intensity neutrino oscillation facilities in Europe. The first is a Super Beam, in which the neutrinos come from the decay of pions created by bombarding targets with a 4 MW proton beam from the CERN High Power Superconducting Proton Linac. The far detector for this facility is the 500 kt MEMPHYS water Cherenkov, located in the…
▽ More
The EUROnu project has studied three possible options for future, high intensity neutrino oscillation facilities in Europe. The first is a Super Beam, in which the neutrinos come from the decay of pions created by bombarding targets with a 4 MW proton beam from the CERN High Power Superconducting Proton Linac. The far detector for this facility is the 500 kt MEMPHYS water Cherenkov, located in the Fréjus tunnel. The second facility is the Neutrino Factory, in which the neutrinos come from the decay of μ+ and μ- beams in a storage ring. The far detector in this case is a 100 kt Magnetised Iron Neutrino Detector at a baseline of 2000 km. The third option is a Beta Beam, in which the neutrinos come from the decay of beta emitting isotopes, in particular 6He and 18Ne, also stored in a ring. The far detector is also the MEMPHYS detector in the Fréjus tunnel. EUROnu has undertaken conceptual designs of these facilities and studied the performance of the detectors. Based on this, it has determined the physics reach of each facility, in particular for the measurement of CP violation in the lepton sector, and estimated the cost of construction. These have demonstrated that the best facility to build is the Neutrino Factory. However, if a powerful proton driver is constructed for another purpose or if the MEMPHYS detector is built for astroparticle physics, the Super Beam also becomes very attractive.
△ Less
Submitted 17 May, 2013;
originally announced May 2013.
-
The SPL-based Neutrino Super Beam
Authors:
E. Baussan,
J. Bielski,
C. Bobeth,
E. Bouquerel,
O. Caretta,
P. Cupial,
T. Davenne,
C. Densham,
M. Dracos,
M. Fitton,
G. Gaudiot,
M. Kozien,
L. Lacny,
B. Lepers,
A. Longhin,
P. Loveridge,
F. Osswald,
P. Poussot,
M. Rooney,
B. Skoczen,
B. Szybinski,
A. Ustrzycka,
N. Vassilopoulos,
D. Wilcox,
A. Wroblewski
, et al. (3 additional authors not shown)
Abstract:
The EUROnu Super Beam work package has studied a neutrino beam based on SPL at CERN and aimed at MEMPHYS, a large water Cherenkov detector, proposed for the Laboratoire Souterrain de Modane (Fréjus tunnel, France), with a baseline of 130 km. The aim of this proposed experiment is to study the CP violation in the neutrino sector.
In the study reported here, we have developed the conceptual design…
▽ More
The EUROnu Super Beam work package has studied a neutrino beam based on SPL at CERN and aimed at MEMPHYS, a large water Cherenkov detector, proposed for the Laboratoire Souterrain de Modane (Fréjus tunnel, France), with a baseline of 130 km. The aim of this proposed experiment is to study the CP violation in the neutrino sector.
In the study reported here, we have developed the conceptual design of the neutrino beam, especially the target and the magnetic focusing device. Indeed, this beam present several unprecedented challenges, like the high primary proton beam power (4 MW), the high repetition rate (50 Hz) and the low energy of the protons (4.5 GeV). The design is completed by a study of all the main component of the system, starting from the transport system to guide the beam to the target up to the beam dump.
△ Less
Submitted 4 December, 2012;
originally announced December 2012.
-
Serial Correlation, Periodicity and Scaling of Eigenmodes in an Emerging Market
Authors:
Diane Wilcox,
Tim Gebbie
Abstract:
We investigate serial correlation, periodic, aperiodic and scaling behaviour of eigenmodes, i.e. daily price fluctuation time-series derived from eigenvectors, of correlation matrices of shares listed on the Johannesburg Stock Exchange (JSE) from January 1993 to December 2002. Periodic, or calendar, components are detected by spectral analysis. We find that calendar effects are limited to eigenm…
▽ More
We investigate serial correlation, periodic, aperiodic and scaling behaviour of eigenmodes, i.e. daily price fluctuation time-series derived from eigenvectors, of correlation matrices of shares listed on the Johannesburg Stock Exchange (JSE) from January 1993 to December 2002. Periodic, or calendar, components are detected by spectral analysis. We find that calendar effects are limited to eigenmodes which correspond to eigenvalues outside the Wishart range. Using a variance ratio test, we uncover serial correlation in the first eigenmodes and find slight negative serial correlation for eigenmodes within the Wishart range. Our spectral analysis and variance ratio investigations suggest that interpolating missing data or illiquid trading days with zero-order hold introduces high frequency noise and spurious serial correlation.
Aperiodic and scaling behaviour of the eigenmodes are investigated by using rescaled-range (R/S) methods and detrended fluctuation analysis (DFA). We find that DFA and classic and modified R/S exponents suggest the presence of long-term memory effects in the first five eigenmodes.
△ Less
Submitted 14 September, 2007; v1 submitted 18 April, 2004;
originally announced April 2004.
-
An analysis of Cross-correlations in South African Market data
Authors:
Diane Wilcox,
Tim Gebbie
Abstract:
We apply random matrix theory to compare correlation matrix estimators C obtained from emerging market data. The correlation matrices are constructed from 10 years of daily data for stocks listed on the Johannesburg Stock Exchange (JSE) from January 1993 to December 2002. We test the spectral properties of C against random matrix predictions and find some agreement between the distributions of e…
▽ More
We apply random matrix theory to compare correlation matrix estimators C obtained from emerging market data. The correlation matrices are constructed from 10 years of daily data for stocks listed on the Johannesburg Stock Exchange (JSE) from January 1993 to December 2002. We test the spectral properties of C against random matrix predictions and find some agreement between the distributions of eigenvalues, nearest neighbour spacings, distributions of eigenvector components and the inverse participation ratios for eigenvectors. We show that interpolating both missing data and illiquid trading days with a zero-order hold increases agreement with RMT predictions. For the more realistic estimation of correlations in an emerging market, we suggest a pairwise measured-data correlation matrix. For the data set used, this approach suggests greater temporal stability for the leading eigenvectors. An interpretation of eigenvectors in terms of trading strategies is given in lieu of classification by economic sectors.
△ Less
Submitted 26 September, 2006; v1 submitted 14 February, 2004;
originally announced February 2004.
