Showing 1–8 of 8 results for author: Zanotto, L

A strategy to identify breakdown location in MITICA test facility: results of high voltage test campaign

Authors: Loris Zanotto, Marco Boldrin, Giuseppe Chitarin, Mattia Dan, Tommaso Patton, Francesco Santoro, Vanni Toigo, Hiroyuki Tobari, Atsushi Kojima, Hans Decamps

Abstract: The Acceleration Grid Power Supply of the MITICA test facility in Padova (Italy) is currently under commissioning. The power conversion system, the DC generator, and the High Voltage equipment have been individually commissioned, whereas the integration tests are ongoing. It is a challenging process due to the unconventional application, to the variety of different electrical technologies involved… ▽ More The Acceleration Grid Power Supply of the MITICA test facility in Padova (Italy) is currently under commissioning. The power conversion system, the DC generator, and the High Voltage equipment have been individually commissioned, whereas the integration tests are ongoing. It is a challenging process due to the unconventional application, to the variety of different electrical technologies involved and to the complexity of the interfaces. During the integrated tests of the power supplies the achievement of 700kV stable operation has been demonstrated for the first time in a Neutral Beam Injector, but an unexpected event occurred, most likely a breakdown in the HV part, which resulted in a fault of the DC generator. A subsequent test using an auxiliary power supply was performed to check the voltage withstanding capability of the HV plant, but another breakdown occurred at around 1MV. This paper describes the activity performed to identify the location of the breakdowns affecting the integrated tests. A test campaign has been devised with increased diagnostic capabilities and specific strategy conceived to trigger intentional breakdowns in specific locations and collect measurement patterns for different cases. The results of the campaign will be presented and the current understanding of the issue will be described, with a view on future tests and further improvements of diagnostics. △ Less

Submitted 26 April, 2023; originally announced April 2023.

Integration studies of RF solid-state generators in the electrical system of NBTF experiments and ITER HNB

Authors: R. Casagrande, A. Maistrello, M. Recchia, M. De Nardi, M. Bigi, L. Zanotto, M. Boldrin, H. Decamps

Abstract: SPIDER operation, started in 2018, pointed out performance-limiting issues caused by the technology employed in RF generators, based on tetrode free-running oscillators. One of these limits, namely the onset of frequency instabilities, prevented operation at the full rated power of 200 kW. In addition, tetrodes require high voltage to operate, which translates to risk of flashovers and the necessi… ▽ More SPIDER operation, started in 2018, pointed out performance-limiting issues caused by the technology employed in RF generators, based on tetrode free-running oscillators. One of these limits, namely the onset of frequency instabilities, prevented operation at the full rated power of 200 kW. In addition, tetrodes require high voltage to operate, which translates to risk of flashovers and the necessity to perform conditioning procedures, limiting the overall reliability. These disadvantages, combined with the positive experience gained in the meanwhile on smaller facilities with solid state amplifiers, led to the proposal of a complete re-design of the radiofrequency power supplies. This paper describes the modelling activities used to define specifications and design criteria of the solid-state amplifiers for SPIDER and MITICA, which can be directly transposed to the ITER HNB units when their functionality is proven. We detail the topology of the generators, consisting of class D amplifier modules combined to achieve the required 200 kW, which design is mainly driven by the necessity to deliver nominal power to the ion source, mitigate the risk of obsolescence, and improve the reliability through modularity. Due to the non-standard application, we gave particular focus to the integration of generators in the RF systems of SPIDER and MITICA. Numerical analyses were performed to verify the impact of harmonic distortion on transmission line and RF load components, to address the effect of mutual coupling between RF circuits on the generator output modulation, and to assess the magnitude of common mode currents in the electric system. These studies, as well as the experience gained from SPIDER operation, helped to define dedicated circuit design provisions and control strategies, which are currently being implemented in the detailed design and construction phase of the new RF amplifiers. △ Less

Submitted 18 April, 2023; originally announced April 2023.

Journal ref: Fusion Engineering and Design 189 (2023): 113478

Spider Ion Source and Extraction Power Supplies -- An update of the design after four years of operation

Authors: A. Shepherd, M. Bigi, R. Casagrande, M. Dan, A. Maistrello, E. Sartori, G. Serianni, H. Decamps, L. Zanotto

Abstract: SPIDER, the ion source prototype for ITER neutral beam injectors, has been in operation since 2018. The experiment includes a system of Ion Source and Extraction Power Supplies (ISEPS), whose design dates back to 2011. Since then the experience gained has led to substantial changes, the most dramatic modification being the complete replacement of the radiofrequency power supply, described elsewher… ▽ More SPIDER, the ion source prototype for ITER neutral beam injectors, has been in operation since 2018. The experiment includes a system of Ion Source and Extraction Power Supplies (ISEPS), whose design dates back to 2011. Since then the experience gained has led to substantial changes, the most dramatic modification being the complete replacement of the radiofrequency power supply, described elsewhere. This contribution details operating experience and calculations that have led to defining new requirements for a specific subset of power supplies, the bias power supplies. The bias power supplies perform the function of filtering out electrons extracted together with the negative ions and in the original 2011 ISEPS design are single quadrant resonant converters. For the two bias power supplies, the picture resulting from the review described in the paper is a substantial redesign, with the ability to operate in four quadrants and a twofold increase of the rated output voltage the most significant new specifications. △ Less

Submitted 17 April, 2023; originally announced April 2023.

Journal ref: Fusion Engineering and Design, Volume 189, April 2023, 113472

Partial Discharges detection in 1 MV power supplies in MITICA experiment, the ITER Heating Neutral Beam Injector prototype

Authors: Marco Boldrin, Mattia Dan, Vanni Toigo, Loris Zanotto, Paolo Barbato, Lucio Baseggio, Manola Carraro, Raffaele Ghiraldelli, Enrico Zerbetto, Stefano Malgarotti, Alberto Rizzi, Giuseppe Rizzi, Hans Decamps, Hiroyuki Tobari

Abstract: MITICA (Megavolt ITER Injector & Concept Advancement), the full scale prototype of ITER Heating Neutral Beam, is under realization at the Neutral Beam Test Facility (Padova, Italy). It is designed to deliver 16.5 MW to ITER plasma, obtained by accelerating negative Deuterium ions up to 1 MeV for a total ion current of 40 A and then neutralized. MITICA Acceleration Power Supply is composed of sever… ▽ More MITICA (Megavolt ITER Injector & Concept Advancement), the full scale prototype of ITER Heating Neutral Beam, is under realization at the Neutral Beam Test Facility (Padova, Italy). It is designed to deliver 16.5 MW to ITER plasma, obtained by accelerating negative Deuterium ions up to 1 MeV for a total ion current of 40 A and then neutralized. MITICA Acceleration Power Supply is composed of several non-standard equipment, beyond industrial standard for insulation voltage level (-1 MVdc) and dimensions. Voltage withstand tests (up to 1.265 MVdc) have been performed in five subsequent steps (from 2018 to 2019), according to the installation progress, after connecting equipment belonging to different procurements. During integrated commissioning, started in 2021, two breakdowns occurred in a position of the HV plant not still identified, so they could be occurred either in air or in SF6. To identify the locations of possible weak insulation points, the existing diagnostics for partial discharge detection (the precursor of breakdowns) as a first step have been improved on air-insulated parts by consisting in a set of instrumentation, like capacitive probes and off-the-shelf instruments for AC application (acoustic and electromagnetic sensors). The paper deals with the instruments qualification to assess their suitability for DC usage and then with the investigation performed in MITICA, in particular: 1) sensitivity assessment campaign, with artificially produced corona effect to identify the minimum threshold of each diagnostics 2) voltage application to MITICA plant, moving the instrumentation around equipment and increasing progressively the voltage looking for corona phenomena to identify possible weak insulation points. △ Less

Submitted 5 April, 2023; originally announced April 2023.

Comments: Nine pages, twelve figures, accepted manuscript of a paper published in Fusion Engineering and Design

Journal ref: Fusion Engineering and Design 187 (2023) 113385

Overview on electrical issues faced during the SPIDER experimental campaigns

Authors: Alberto Maistrello, Matteo Agostini, Marco Bigi, Matteo Brombin, Mattia Dan, Riccardo Casagrande, Marco De Nardi, Alberto Ferro, Elena Gaio, Palak Jain, Francesco Lunardon, Nicolò Marconato, Diego Marcuzzi, Mauro Recchia, Tommaso Patton, Mauro Pavei, Francesco Santoro, Vanni Toigo, Loris Zanotto, Marco Barbisan, Lucio Baseggio, Marco Bernardi, Giovanni Berton, Marco Boldrin, Samuele Dal Bello , et al. (17 additional authors not shown)

Abstract: SPIDER is the full-scale prototype of the ion source of the ITER Heating Neutral Beam Injector, where negative ions of Hydrogen or Deuterium are produced by a RF generated plasma and accelerated with a set of grids up to ~100 keV. The Power Supply System is composed of high voltage dc power supplies capable of handling frequent grid breakdowns, high current dc generators for the magnetic filter fi… ▽ More SPIDER is the full-scale prototype of the ion source of the ITER Heating Neutral Beam Injector, where negative ions of Hydrogen or Deuterium are produced by a RF generated plasma and accelerated with a set of grids up to ~100 keV. The Power Supply System is composed of high voltage dc power supplies capable of handling frequent grid breakdowns, high current dc generators for the magnetic filter field and RF generators for the plasma generation. During the first 3 years of SPIDER operation different electrical issues were discovered, understood and addressed thanks to deep analyses of the experimental results supported by modelling activities. The paper gives an overview on the observed phenomena and relevant analyses to understand them, on the effectiveness of the short-term modifications provided to SPIDER to face the encountered issues and on the design principle of long-term solutions to be introduced during the currently ongoing long shutdown. △ Less

Submitted 5 April, 2023; originally announced April 2023.

Comments: 8 pages, 12 figures. Presented at SOFT 2022

Journal ref: Fusion Engineering and Design, vol. 190, pages 113510, year 2023, issn 0920-3796

Lessons learned after three years of SPIDER operation and the first MITICA integrated tests

Authors: D. Marcuzzi, V. Toigo, M. Boldrin, G. Chitarin, S. Dal Bello, L. Grando, A. Luchetta, R. Pasqualotto, M. Pavei, G. Serianni, L. Zanotto, R. Agnello, P. Agostinetti, M. Agostini, D. Aprile, M. Barbisan, M. Battistella, G. Berton, M. Bigi, M. Brombin, V. Candela, V. Candeloro, A. Canton, R. Casagrande, C. Cavallini , et al. (117 additional authors not shown)

Abstract: ITER envisages the use of two heating neutral beam injectors plus an optional one as part of the auxiliary heating and current drive system. The 16.5 MW expected neutral beam power per injector is several notches higher than worldwide existing facilities. A Neutral Beam Test Facility (NBTF) was established at Consorzio RFX, exploiting the synergy of two test beds, SPIDER and MITICA. SPIDER is dedi… ▽ More ITER envisages the use of two heating neutral beam injectors plus an optional one as part of the auxiliary heating and current drive system. The 16.5 MW expected neutral beam power per injector is several notches higher than worldwide existing facilities. A Neutral Beam Test Facility (NBTF) was established at Consorzio RFX, exploiting the synergy of two test beds, SPIDER and MITICA. SPIDER is dedicated to developing and characterizing large efficient negative ion sources at relevant parameters in ITER-like conditions: source and accelerator located in the same vacuum where the beam propagates, immunity to electromagnetic interferences of multiple radio-frequency (RF) antennas, avoidance of RF-induced discharges on the outside of the source. Three years of experiments on SPIDER have addressed to the necessary design modifications to enable full performances. The source is presently under a long shut-down phase to incorporate learnings from the experimental campaign. Parallelly, developments on MITICA, the full-scale prototype of the ITER NBI featuring a 1 MV accelerator and ion neutralization, are underway including manufacturing of in-vessel components, while power supplies and auxiliary plants are already under final testing and commissioning. Integration, commissioning and tests of the 1MV power supplies are essential for this first-of-kind system, unparalleled both in research and industry field. The integrated test to confirm 1MV output by combining invertor systems, DC generators and transmission lines extracted errors/accidents in some components. To realize a concrete system for ITER, solutions for the repair and the improvement of the system were developed. Hence, NBTF is emerging as a necessary facility, due to the large gap with existing injectors, effectively dedicated to identify issues and find solutions to enable successful ITER NBI operations in a time bound fashion. △ Less

Submitted 4 April, 2023; originally announced April 2023.

Journal ref: Fusion Engineering and Design 191 (2023) 113590

Terahertz scanless hypertemporal imaging

Authors: Luca Zanotto, Giacomo Balistreri, Andrea Rovere, O-Pil Kwon, Roberto Morandotti, Riccardo Piccoli, Luca Razzari

Abstract: Since its first demonstration in 1995, terahertz time-domain imaging has attracted an increasingly growing interest for its ability to reveal spectral fingerprints of materials, probe changes in refractive index and absorption, as well as detect the inner structure of complex objects via time-of-flight measurements. Practically, however, its widespread use has been hampered by the very long acquis… ▽ More Since its first demonstration in 1995, terahertz time-domain imaging has attracted an increasingly growing interest for its ability to reveal spectral fingerprints of materials, probe changes in refractive index and absorption, as well as detect the inner structure of complex objects via time-of-flight measurements. Practically, however, its widespread use has been hampered by the very long acquisition time typically required to spatially raster-scan the object and, for each spatial point, record the field in time via a delay line. Here, we address this fundamental bottleneck by implementing a scanless single-pixel imaging scheme, which sets the path for an unprecedented reduction of both system complexity and acquisition time. By properly exploiting natural wave diffraction, time-to-space encoding applied to terahertz point detection allows for an almost instantaneous capture of the terahertz waveforms, while multidimensional images are reconstructed via a computational approach. Our scheme is a promising solution for the development of next-generation fast and compact terahertz imagers perfectly suitable for high-repetition-rate laser sources. △ Less

Submitted 23 September, 2022; originally announced September 2022.

Comments: 18 pages, 5 figures

Time-domain terahertz compressive imaging

Authors: Luca Zanotto, Riccardo Piccoli, Junliang Dong, Diego Caraffini, Roberto Morandotti, Luca Razzari

Abstract: We present an implementation of the single-pixel imaging approach into a terahertz (THz) time-domain spectroscopy (TDS) system. We demonstrate the indirect coherent reconstruction of THz temporal waveforms at each spatial position of an object, without the need of mechanical raster-scanning. First, we exploit such temporal information to realize (far-field) time-of-flight images. In addition, as a… ▽ More We present an implementation of the single-pixel imaging approach into a terahertz (THz) time-domain spectroscopy (TDS) system. We demonstrate the indirect coherent reconstruction of THz temporal waveforms at each spatial position of an object, without the need of mechanical raster-scanning. First, we exploit such temporal information to realize (far-field) time-of-flight images. In addition, as a proof of concept, we apply a typical compressive sensing algorithm to demonstrate image reconstruction with less than 50% of the total required measurements. Finally, the access to frequency domain is also demonstrated by reconstructing spectral images of an object featuring an absorption line in the THz range. The combination of single-pixel imaging with compressive sensing algorithms allows to reduce both complexity and acquisition time of current THz-TDS imaging systems. △ Less

Submitted 25 November, 2019; v1 submitted 20 November, 2019; originally announced November 2019.