-
Electron-only reconnection and inverse magnetic-energy transfer at sub-ion scales
Authors:
Zhuo Liu,
Caio Silva,
Lucio M. Milanese,
Muni Zhou,
Noah R. Mandell,
Nuno F. Loureiro
Abstract:
We derive, and validate numerically, an analytical model for electron-only magnetic reconnection applicable to strongly magnetized (low-beta) plasmas. Our model predicts sub-ion-scale reconnection rates significantly higher than those pertaining to large-scale reconnection, aligning with recent observations and simulations. We apply this reconnection model to the problem of inverse magnetic-energy…
▽ More
We derive, and validate numerically, an analytical model for electron-only magnetic reconnection applicable to strongly magnetized (low-beta) plasmas. Our model predicts sub-ion-scale reconnection rates significantly higher than those pertaining to large-scale reconnection, aligning with recent observations and simulations. We apply this reconnection model to the problem of inverse magnetic-energy transfer at sub-ion scales. We derive time-dependent scaling laws for the magnetic energy decay and the typical magnetic structure dimensions that differ from those previously found in the MHD regime. These scaling laws are validated via two- and three-dimensional simulations, demonstrating that sub-ion scale magnetic fields can reach large, system-size scales via successive coalescence.
△ Less
Submitted 8 July, 2024;
originally announced July 2024.
-
Data quality control system and long-term performance monitor of the LHAASO-KM2A
Authors:
Zhen Cao,
F. Aharonian,
Axikegu,
Y. X. Bai,
Y. W. Bao,
D. Bastieri,
X. J. Bi,
Y. J. Bi,
W. Bian,
A. V. Bukevich,
Q. Cao,
W. Y. Cao,
Zhe Cao,
J. Chang,
J. F. Chang,
A. M. Chen,
E. S. Chen,
H. X. Chen,
Liang Chen,
Lin Chen,
Long Chen,
M. J. Chen,
M. L. Chen,
Q. H. Chen,
S. Chen
, et al. (263 additional authors not shown)
Abstract:
The KM2A is the largest sub-array of the Large High Altitude Air Shower Observatory (LHAASO). It consists of 5216 electromagnetic particle detectors (EDs) and 1188 muon detectors (MDs). The data recorded by the EDs and MDs are used to reconstruct primary information of cosmic ray and gamma-ray showers. This information is used for physical analysis in gamma-ray astronomy and cosmic ray physics. To…
▽ More
The KM2A is the largest sub-array of the Large High Altitude Air Shower Observatory (LHAASO). It consists of 5216 electromagnetic particle detectors (EDs) and 1188 muon detectors (MDs). The data recorded by the EDs and MDs are used to reconstruct primary information of cosmic ray and gamma-ray showers. This information is used for physical analysis in gamma-ray astronomy and cosmic ray physics. To ensure the reliability of the LHAASO-KM2A data, a three-level quality control system has been established. It is used to monitor the status of detector units, stability of reconstructed parameters and the performance of the array based on observations of the Crab Nebula and Moon shadow. This paper will introduce the control system and its application on the LHAASO-KM2A data collected from August 2021 to July 2023. During this period, the pointing and angular resolution of the array were stable. From the observations of the Moon shadow and Crab Nebula, the results achieved using the two methods are consistent with each other. According to the observation of the Crab Nebula at energies from 25 TeV to 100 TeV, the time averaged pointing errors are estimated to be $-0.003^{\circ} \pm 0.005^{\circ}$ and $0.001^{\circ} \pm 0.006^{\circ}$ in the R.A. and Dec directions, respectively.
△ Less
Submitted 13 June, 2024; v1 submitted 20 May, 2024;
originally announced May 2024.
-
Ultra-clean assembly of van der Waals heterostructures
Authors:
Wendong Wang,
Nicholas Clark,
Matthew Hamer,
Amy Carl,
Endre Tovari,
Sam Sullivan-Allsop,
Evan Tillotson,
Yunze Gao,
Hugo de Latour,
Francisco Selles,
James Howarth,
Eli G. Castanon,
Mingwei Zhou,
Haoyu Bai,
Xiao Li,
Astrid Weston,
Kenji Watanabe,
Takashi Taniguchi,
Cecilia Mattevi,
Thomas H. Bointon,
Paul V. Wiper,
Andrew J. Strudwick,
Leonid A. Ponomarenko,
Andrey Kretinin,
Sarah J. Haigh
, et al. (2 additional authors not shown)
Abstract:
Layer-by-layer assembly of van der Waals (vdW) heterostructures underpins new discoveries in solid state physics, material science and chemistry. Despite the successes, all current 2D material (2DM) transfer techniques rely on the use of polymers which limit the cleanliness, ultimate electronic performance, and potential for optoelectronic applications of the heterostructures. In this article, we…
▽ More
Layer-by-layer assembly of van der Waals (vdW) heterostructures underpins new discoveries in solid state physics, material science and chemistry. Despite the successes, all current 2D material (2DM) transfer techniques rely on the use of polymers which limit the cleanliness, ultimate electronic performance, and potential for optoelectronic applications of the heterostructures. In this article, we present a novel polymer-free platform for rapid and facile heterostructure assembly which utilises re-usable flexible silicon nitride membranes. We demonstrate that this allows fast and reproducible production of 2D heterostructures using both exfoliated and CVD-grown materials with perfect interfaces free from interlayer contamination and correspondingly excellent electronic behaviour, limited only by the size and intrinsic quality of the crystals used. Furthermore, removing the need for polymeric carriers allows new possibilities for vdW heterostructure fabrication: assembly at high temperatures up to 600°C, and in different environments including ultra-high vacuum (UHV) and when the materials are fully submerged in liquids. We demonstrate UHV heterostructure assembly for the first time, and show the reliable creation of graphene moiré superlattices with more than an order of magnitude improvement in their structural homogeneity. We believe that broad adaptation of our novel inorganic 2D materials assembly strategy will allow realisation of the full potential of vdW heterostructures as a platform for new physics and advanced optoelectronic technologies.
△ Less
Submitted 25 August, 2023;
originally announced August 2023.
-
Magnetogenesis in a collisionless plasma: from Weibel instability to turbulent dynamo
Authors:
Muni Zhou,
Vladimir Zhdankin,
Matthew W. Kunz,
Nuno F. Loureiro,
Dmitri A. Uzdensky
Abstract:
We report on a first-principles numerical and theoretical study of plasma dynamo in a fully kinetic framework. By applying an external mechanical force to an initially unmagnetized plasma, we develop a self-consistent treatment of the generation of ``seed'' magnetic fields, the formation of turbulence, and the inductive amplification of fields by the fluctuation dynamo. Driven large-scale motions…
▽ More
We report on a first-principles numerical and theoretical study of plasma dynamo in a fully kinetic framework. By applying an external mechanical force to an initially unmagnetized plasma, we develop a self-consistent treatment of the generation of ``seed'' magnetic fields, the formation of turbulence, and the inductive amplification of fields by the fluctuation dynamo. Driven large-scale motions in an unmagnetized, weakly collisional plasma are subject to strong phase mixing, which leads to the development of thermal pressure anisotropy. This anisotropy triggers the Weibel instability, which produces filamentary ``seed'' magnetic fields on plasma-kinetic scales. The plasma is thereby magnetized, enabling efficient stretching and folding of the fields by the plasma motions and the development of Larmor-scale kinetic instabilities such as the firehose and mirror. The scattering of particles off the associated microscale magnetic fluctuations provides an effective viscosity, regulating the field morphology and turbulence. During this process, the seed field is further amplified by the fluctuation dynamo until they reach energy equipartition with the turbulent flow. By demonstrating that equipartition magnetic fields can be generated from an initially unmagnetized plasma through large-scale turbulent flows, this work has important implications for the origin and amplification of magnetic fields in the intracluster and intergalactic mediums.
△ Less
Submitted 28 July, 2023;
originally announced August 2023.
-
Extended magnetic reconnection in kinetic plasma turbulence
Authors:
Tak Chu Li,
Yi-Hsin Liu,
Yi Qi,
Muni Zhou
Abstract:
Magnetic reconnection and plasma turbulence are ubiquitous processes important for laboratory, space and astrophysical plasmas. Reconnection has been suggested to play an important role in the energetics and dynamics of turbulence by observations, simulations and theory for two decades. The fundamental properties of reconnection at kinetic scales, essential to understanding the general problem of…
▽ More
Magnetic reconnection and plasma turbulence are ubiquitous processes important for laboratory, space and astrophysical plasmas. Reconnection has been suggested to play an important role in the energetics and dynamics of turbulence by observations, simulations and theory for two decades. The fundamental properties of reconnection at kinetic scales, essential to understanding the general problem of reconnection in magnetized turbulence, remain largely unknown at present. Here we present an application of the magnetic flux transport method that can accurately identify reconnection in turbulence to a three-dimensional simulation. Contrary to ideas that reconnection in turbulence would be patchy and unpredictable, highly extended reconnection X-lines, on the same order of magnitude as the system size, form at kinetic scales. Extended X-lines develop through bi-directional reconnection spreading. They satisfy critical balance characteristic of turbulence, which predicts the X-line extent at a given scale. These results present a picture of fundamentally extended reconnection in kinetic-scale turbulence.
△ Less
Submitted 15 August, 2023; v1 submitted 15 March, 2023;
originally announced March 2023.
-
Resource-efficient Direct Characterization of General Density Matrix
Authors:
Liang Xu,
Mingti Zhou,
Runxia Tao,
Zhipeng Zhong,
Ben Wang,
Zhiyong Cao,
Hongkuan Xia,
Qianyi Wang,
Hao Zhan,
Aonan Zhang,
Shang Yu,
Nanyang Xu,
Ying Dong,
Changliang Ren,
Lijian Zhang
Abstract:
Sequential weak measurements allow the direct extraction of individual density-matrix elements instead of globally reconstructing the whole density matrix, opening a new avenue for the characterization of quantum systems. Nevertheless, the requirement of multiple coupling for each qudit of quantum systems and the lack of appropriate precision evaluation constraint its applicability extension, espe…
▽ More
Sequential weak measurements allow the direct extraction of individual density-matrix elements instead of globally reconstructing the whole density matrix, opening a new avenue for the characterization of quantum systems. Nevertheless, the requirement of multiple coupling for each qudit of quantum systems and the lack of appropriate precision evaluation constraint its applicability extension, especially for multi-qudit quantum systems. Here, we propose a resource-efficient scheme (RES) to directly characterize the density matrix of general multi-qudit systems, which not only optimizes the measurements but also establishes a feasible estimation analysis. In this scheme, an efficient observable of quantum system is constructed such that a single meter state coupled to each qudit is sufficient to extract the corresponding density-matrix element. An appropriate model based on the statistical distribution of errors are used to evaluate the precision and feasibility of the scheme. We experimentally apply the RES to the direct characterization of general single-photon qutrit states and two-photon entangled states. The results show that the RES outperforms the sequential schemes in terms of efficiency and precision in both weak- and strong- coupling scenarios. This work sheds new light on the practical characterization of large-scale quantum systems and investigation of their non-classical properties.
△ Less
Submitted 13 March, 2023;
originally announced March 2023.
-
Adapting Node-Place Model to Predict and Monitor COVID-19 Footprints and Transmission Risks
Authors:
Jiali Zhou,
Mingzhi Zhou,
Jiangping Zhou,
Zhan Zhao
Abstract:
The node-place model has been widely used to classify and evaluate transit stations, which sheds light on individual travel behaviors and supports urban planning through effectively integrating land use and transportation development. This article adapts this model to investigate whether and how node, place, and mobility would be associated with the transmission risks and presences of the local CO…
▽ More
The node-place model has been widely used to classify and evaluate transit stations, which sheds light on individual travel behaviors and supports urban planning through effectively integrating land use and transportation development. This article adapts this model to investigate whether and how node, place, and mobility would be associated with the transmission risks and presences of the local COVID-19 cases in a city. Similar studies on the model and its relevance to COVID-19, according to our knowledge, have not been undertaken before. Moreover, the unique metric drawn from detailed visit history of the infected, i.e., the COVID-19 footprints, is proposed and exploited. This study then empirically uses the adapted model to examine the station-level factors affecting the local COVID-19 footprints. The model accounts for traditional measures of the node and place as well as actual human mobility patterns associated with the node and place. It finds that stations with high node, place, and human mobility indices normally have more COVID-19 footprints in proximity. A multivariate regression is fitted to see whether and to what degree different indices and indicators can predict the COVID-19 footprints. The results indicate that many of the place, node, and human mobility indicators significantly impact the concentration of COVID-19 footprints. These are useful for policy-makers to predict and monitor hotspots for COVID-19 and other pandemics transmission.
△ Less
Submitted 30 December, 2022;
originally announced January 2023.
-
A Neural Network Warm-Start Approach for the Inverse Acoustic Obstacle Scattering Problem
Authors:
Mo Zhou,
Jiequn Han,
Manas Rachh,
Carlos Borges
Abstract:
We consider the inverse acoustic obstacle problem for sound-soft star-shaped obstacles in two dimensions wherein the boundary of the obstacle is determined from measurements of the scattered field at a collection of receivers outside the object. One of the standard approaches for solving this problem is to reformulate it as an optimization problem: finding the boundary of the domain that minimizes…
▽ More
We consider the inverse acoustic obstacle problem for sound-soft star-shaped obstacles in two dimensions wherein the boundary of the obstacle is determined from measurements of the scattered field at a collection of receivers outside the object. One of the standard approaches for solving this problem is to reformulate it as an optimization problem: finding the boundary of the domain that minimizes the $L^2$ distance between computed values of the scattered field and the given measurement data. The optimization problem is computationally challenging since the local set of convexity shrinks with increasing frequency and results in an increasing number of local minima in the vicinity of the true solution. In many practical experimental settings, low frequency measurements are unavailable due to limitations of the experimental setup or the sensors used for measurement. Thus, obtaining a good initial guess for the optimization problem plays a vital role in this environment.
We present a neural network warm-start approach for solving the inverse scattering problem, where an initial guess for the optimization problem is obtained using a trained neural network. We demonstrate the effectiveness of our method with several numerical examples. For high frequency problems, this approach outperforms traditional iterative methods such as Gauss-Newton initialized without any prior (i.e., initialized using a unit circle), or initialized using the solution of a direct method such as the linear sampling method. The algorithm remains robust to noise in the scattered field measurements and also converges to the true solution for limited aperture data. However, the number of training samples required to train the neural network scales exponentially in frequency and the complexity of the obstacles considered. We conclude with a discussion of this phenomenon and potential directions for future research.
△ Less
Submitted 3 August, 2023; v1 submitted 16 December, 2022;
originally announced December 2022.
-
Locating the eigenshield of a network via perturbation theory
Authors:
Ming-Yang Zhou,
Manuel Sebastian Mariani,
Hao Liao,
Rui Mao,
Yi-Cheng Zhang
Abstract:
The functions of complex networks are usually determined by a small set of vital nodes. Finding the best set of vital nodes (eigenshield nodes) is critical to the network's robustness against rumor spreading and cascading failures, which makes it one of the fundamental problems in network science. The problem is challenging as it requires to maximize the influence of nodes in the set while simulta…
▽ More
The functions of complex networks are usually determined by a small set of vital nodes. Finding the best set of vital nodes (eigenshield nodes) is critical to the network's robustness against rumor spreading and cascading failures, which makes it one of the fundamental problems in network science. The problem is challenging as it requires to maximize the influence of nodes in the set while simultaneously minimizing the redundancies between the set's nodes. However, the redundancy mechanism is rarely investigated by previous studies. Here we introduce the matrix perturbation framework to find a small ``eigenshield" set of nodes that, when removed, lead to the largest drop in the network's spectral radius. We show that finding the ``eigenshield" nodes can be translated into the optimization of an objective function that simultaneously accounts for the individual influence of each node and redundancy between different nodes.
We analytically quantify the influence redundancy that explains why an important node might play an insignificant role in the ``eigenshield" node set. Extensive experiments under diverse influence maximization problems, ranging from network dismantling to spreading maximization, demonstrate that the eigenshield detection tends to significantly outperforms state-of-the-art methods across most problems. Our findings shed light on the mechanisms that may lie at the core of the function of vital nodes in complex network.
△ Less
Submitted 28 October, 2022;
originally announced October 2022.
-
de-Broglie Wavelength Enhanced Weak Equivalence Principle Test for Atoms in Different Hyperfine States
Authors:
Yao-Yao Xu,
Xiao-Bing Deng,
Xiao-Chun Duan,
Lu-Shuai Cao,
Min-Kang Zhou,
Cheng-Gang Shao,
Zhong-Kun Hu
Abstract:
We report a hyperfine-states related weak equivalence principle (WEP) test which searches for possible WEP violation signal in single atom interferometer. With the ground hyperfine states $\left|F=1\right\rangle$ and $\left|F=2\right\rangle$ of $^{87}$Rb atoms simultaneously scanned over different paths in a Raman Mach-Zehnder interferometer (MZI), the difference of the free fall accelerations for…
▽ More
We report a hyperfine-states related weak equivalence principle (WEP) test which searches for possible WEP violation signal in single atom interferometer. With the ground hyperfine states $\left|F=1\right\rangle$ and $\left|F=2\right\rangle$ of $^{87}$Rb atoms simultaneously scanned over different paths in a Raman Mach-Zehnder interferometer (MZI), the difference of the free fall accelerations for the atom in the two hyperfine states is encoded into the phase shift of the MZI, contributing a WEP test signal. The test signal can be extracted out by reversing the direction of the effective wave vector of the Raman laser to suppress direction-dependent disturbances. More importantly, de-Broglie wavelength of cold atoms can be utilized to enhance the test signal in our scheme, which helps to improve the upper bound of the WEP test for atoms in different hyperfine states to $2.9\times10^{-11}$, about one order of magnitude lower than the previous record.
△ Less
Submitted 17 October, 2022; v1 submitted 16 October, 2022;
originally announced October 2022.
-
3D Bayesian Variational Full Waveform Inversion
Authors:
Xin Zhang,
Angus Lomas,
Muhong Zhou,
York Zheng,
Andrew Curtis
Abstract:
Seismic full-waveform inversion (FWI) provides high resolution images of the subsurface by exploiting information in the recorded seismic waveforms. This is achieved by solving a highly nonnlinear and nonunique inverse problem. Bayesian inference is therefore used to quantify uncertainties in the solution. Variational inference is a method that provides probabilistic, Bayesian solutions efficientl…
▽ More
Seismic full-waveform inversion (FWI) provides high resolution images of the subsurface by exploiting information in the recorded seismic waveforms. This is achieved by solving a highly nonnlinear and nonunique inverse problem. Bayesian inference is therefore used to quantify uncertainties in the solution. Variational inference is a method that provides probabilistic, Bayesian solutions efficiently using optimization. The method has been applied to 2D FWI problems to produce full Bayesian posterior distributions. However, due to higher dimensionality and more expensive computational cost, the performance of the method in 3D FWI problems remains unknown. We apply three variational inference methods to 3D FWI and analyse their performance. Specifically we apply automatic differential variational inference (ADVI), Stein variational gradient descent (SVGD) and stochastic SVGD (sSVGD), to a 3D FWI problem, and compare their results and computational cost. The results show that ADVI is the most computationally efficient method but systematically underestimates the uncertainty. The method can therefore be used to provide relatively rapid but approximate insights into the subsurface together with a lower bound estimate of the uncertainty. SVGD demands the highest computational cost, and still produces biased results. In contrast, by including a randomized term in the SVGD dynamics, sSVGD becomes a Markov chain Monte Carlo method and provides the most accurate results at intermediate computational cost. We thus conclude that 3D variational full-waveform inversion is practically applicable, at least in small problems, and can be used to image the Earth's interior and to provide reasonable uncertainty estimates on those images.
△ Less
Submitted 10 October, 2022; v1 submitted 7 October, 2022;
originally announced October 2022.
-
Intermittency and electron heating in kinetic-Alfvén-wave turbulence
Authors:
Muni Zhou,
Zhuo Liu,
Nuno F. Loureiro
Abstract:
We report analytical and numerical investigations of sub-ion-scale turbulence in low-beta plasmas, focusing on the spectral properties of the fluctuations and electron heating. In the isothermal limit, the numerical results strongly support a description of the turbulence as a critically-balanced Kolmogorov-like cascade of kinetic Alfvén wave fluctuations, as amended by Boldyrev & Perez (Astrophys…
▽ More
We report analytical and numerical investigations of sub-ion-scale turbulence in low-beta plasmas, focusing on the spectral properties of the fluctuations and electron heating. In the isothermal limit, the numerical results strongly support a description of the turbulence as a critically-balanced Kolmogorov-like cascade of kinetic Alfvén wave fluctuations, as amended by Boldyrev & Perez (Astrophys. J. Lett. 758, L44 (2012)) to include intermittent effects. When the constraint of isothermality is removed (i.e., with the inclusion of electron kinetic physics), the energy spectrum is found to steepen due to electron Landau damping, which is enabled by the local weakening of advective nonlinearities around current sheets, and yields significant energy dissipation via a velocity-space cascade. The use of a Hermite-polynomial representation to express the velocity-space dependence of the electron distribution function allows us to obtain an analytical, lowest-order solution for the Hermite moments of the distribution, which is borne out by numerical simulations.
△ Less
Submitted 4 August, 2022;
originally announced August 2022.
-
Decoupled measurement and modeling of interface reaction kinetics of ion-intercalation battery electrodes
Authors:
Ruoyu Xiong,
Mengyuan Zhou,
Longhui Li,
Jia Xu,
Maoyuan Li,
Bo Yan,
Dequn Li,
Yun Zhang,
Huamin Zhou
Abstract:
Ultrahigh rate performance of active particles used in lithium-ion battery electrodes has been revealed by single-particle measurements, which indicates a huge potential for developing high-power batteries. However, the charging/discharging behaviors of single particles at ultrahigh C-rates can no longer be described by the traditional electrochemical kinetics in such ion-intercalation active mate…
▽ More
Ultrahigh rate performance of active particles used in lithium-ion battery electrodes has been revealed by single-particle measurements, which indicates a huge potential for developing high-power batteries. However, the charging/discharging behaviors of single particles at ultrahigh C-rates can no longer be described by the traditional electrochemical kinetics in such ion-intercalation active materials. In the meantime, regular kinetic measuring methods meet a challenge due to the coupling of interface reaction and solid-state diffusion processes of active particles. Here, we decouple the reaction and diffusion kinetics via time-resolved potential measurements with an interval of 1 ms, revealing that the classical Butler-Volmer equation deviates from the actual relation between current density, overpotential, and Li+ concentration. An interface ion-intercalation model is developed which considers the excess driving force of Li+ (de)intercalation in the charge transfer reaction for ion-intercalation materials. Simulations demonstrate that the proposed model enables accurate prediction of charging/discharging at both single-particle and electrode scales for various active materials. The kinetic limitation processes from single particles to composite electrodes are systematically revealed, promoting rational designs of high-power batteries.
△ Less
Submitted 8 July, 2022;
originally announced July 2022.
-
Overpotential decomposition enabled decoupling of complex kinetic processes in battery electrodes
Authors:
Ruoyu Xiong,
Yue Yu,
Shuyi Chen,
Maoyuan Li,
Longhui Li,
Mengyuan Zhou,
Wen Zhang,
Bo Yan,
Dequn Li,
Hui Yang,
Yun Zhang,
Huamin Zhou
Abstract:
Identifying overpotential components of electrochemical systems enables quantitative analysis of polarization contributions of kinetic processes under practical operating conditions. However, the inherently coupled kinetic processes lead to an enormous challenge in measuring individual overpotentials, particularly in composite electrodes of lithium-ion batteries. Herein, the full decomposition of…
▽ More
Identifying overpotential components of electrochemical systems enables quantitative analysis of polarization contributions of kinetic processes under practical operating conditions. However, the inherently coupled kinetic processes lead to an enormous challenge in measuring individual overpotentials, particularly in composite electrodes of lithium-ion batteries. Herein, the full decomposition of electrode overpotential is realized by the collaboration of single-layer structured particle electrode (SLPE) constructions and time-resolved potential measurements, explicitly revealing the evolution of kinetic processes. Perfect prediction of the discharging profiles is achieved via potential measurements on SLPEs, even in extreme polarization conditions. By decoupling overpotentials in different electrode/cell structures and material systems, the dominant limiting processes of battery rate performance are uncovered, based on which the optimization of electrochemical kinetics can be conducted. Our study not only shades light on decoupling complex kinetics in electrochemical systems, but also provides vitally significant guidance for the rational design of high-performance batteries.
△ Less
Submitted 5 July, 2022;
originally announced July 2022.
-
One-step exfoliation method for plasmonic activation of large-area 2D crystals
Authors:
Qiang Fu,
Jia-Qi Dai,
Xin-Yu Huang,
Yun-Yun Dai,
Yu-Hao Pan,
Long-Long Yang,
Zhen-Yu Sun,
Tai-Min Miao,
Meng-Fan Zhou,
Lin Zhao,
Wei-Jie Zhao,
Xu Han,
Jun-Peng Lu,
Hong-Jun Gao,
Xing-Jiang Zhou,
Ye-Liang Wang,
Zhen-Hua Ni,
Wei Ji,
Yuan Huang
Abstract:
Advanced exfoliation techniques are crucial for exploring the intrinsic properties and applications of 2D materials. Though the recently discovered Au-enhanced exfoliation technique provides an effective strategy for preparation of large-scale 2D crystals, the high cost of gold hinders this method from being widely adopted in industrial applications. In addition, direct Au contact could significan…
▽ More
Advanced exfoliation techniques are crucial for exploring the intrinsic properties and applications of 2D materials. Though the recently discovered Au-enhanced exfoliation technique provides an effective strategy for preparation of large-scale 2D crystals, the high cost of gold hinders this method from being widely adopted in industrial applications. In addition, direct Au contact could significantly quench photoluminescence (PL) emission in 2D semiconductors. It is therefore crucial to find alternative metals that can replace gold to achieve efficient exfoliation of 2D materials. Here, we present a one-step Ag-assisted method that can efficiently exfoliate many large-area 2D monolayers, where the yield ratio is comparable to Au-enhanced exfoliation method. Differing from Au film, however, the surface roughness of as-prepared Ag films on SiO2/Si substrate is much higher, which facilitates the generation of surface plasmons resulting from the nanostructures formed on the rough Ag surface. More interestingly, the strong coupling between 2D semiconductor crystals (e.g. MoS2, MoSe2) and Ag film leads to a unique PL enhancement that has not been observed in other mechanical exfoliation techniques, which can be mainly attributed to enhanced light-matter interaction as a result of extended propagation of surface plasmonic polariton (SPP). Our work provides a lower-cost and universal Ag-assisted exfoliation method, while at the same offering enhanced SPP-matter interactions.
△ Less
Submitted 4 July, 2022;
originally announced July 2022.
-
Exploration of the computational model and the focusing process with a Flat Multi-channel Plate and a Curved Multi-channel Plate in the MATLAB
Authors:
Mo Zhou,
Kai Pan,
Tian-Cheng Yi,
Xing-Fen Jiang,
Bin Zhou,
Jian-Rong Zhou,
Xue-Peng Sun,
Song-Ling Wang,
Bo-Wen Jiang,
Tian-Xi Sun,
Zhi-Guo Liu
Abstract:
By simulating the X-ray paths and the Chapman Model of a flat multi-channel plate and a curved multi-channel plate in the MATLAB, the field of view, local reflection efficiency, spherical aberration, point-spread function, collection efficiency of incident X-ray and peak-to-background ratio on the focal plane of the two devices were compared. At the same time, the advantages and disadvantages of t…
▽ More
By simulating the X-ray paths and the Chapman Model of a flat multi-channel plate and a curved multi-channel plate in the MATLAB, the field of view, local reflection efficiency, spherical aberration, point-spread function, collection efficiency of incident X-ray and peak-to-background ratio on the focal plane of the two devices were compared. At the same time, the advantages and disadvantages of the flat multi-channel plate and the curved multi-channel plate were compared.
△ Less
Submitted 28 May, 2022;
originally announced May 2022.
-
Theoretical Simulation and Experiment Investigation of X-ray transmission characteristics though Square Polycapillary Slice Lens with quadratic curve
Authors:
Mo Zhou,
Kai Pan,
Tian-Cheng Yi,
Jian-Rong Zhou,
Xue-Peng Sun,
Song-Ling Wang,
Xing-Fen Jiang,
Bin Zhou,
Bo-Wen Jiang,
Tian-Xi Sun,
Zhi-Guo Liu,
Yu-De Li
Abstract:
The x-ray polycapillary lens is an optical device with good optic performance. Similar to the traditional X-ray polycapillary lens, square polycapillary slice lens was regulated on X-ray based on the full reflection principle of X-ray in the capillaries surfaces. According to its geometrical structure model and the X-ray tracing principle, a set of X-ray transmission procedures was established. A…
▽ More
The x-ray polycapillary lens is an optical device with good optic performance. Similar to the traditional X-ray polycapillary lens, square polycapillary slice lens was regulated on X-ray based on the full reflection principle of X-ray in the capillaries surfaces. According to its geometrical structure model and the X-ray tracing principle, a set of X-ray transmission procedures was established. A complete square polycapillary slice lens with quadratic curve was produced and the optical performance was tested
△ Less
Submitted 6 May, 2022;
originally announced May 2022.
-
Silicon carbide for integrated photonics
Authors:
Ailun Yi,
Chengli Wang,
Liping Zhou,
Min Zhou,
Shibin Zhang,
Tiangui You,
Jiaxiang Zhang,
Xin Ou
Abstract:
The recent progress in chip-scale integrated photonics has stimulated the rapid development of material platforms with desired optical properties. Among the different material platforms that are currently investigated, the third-generation semiconductor, silicon carbide (SiC), offers the broadest range of functionalities, including wide bandgap, high optical nonlinearities, high refractive index,…
▽ More
The recent progress in chip-scale integrated photonics has stimulated the rapid development of material platforms with desired optical properties. Among the different material platforms that are currently investigated, the third-generation semiconductor, silicon carbide (SiC), offers the broadest range of functionalities, including wide bandgap, high optical nonlinearities, high refractive index, and CMOS-compatible device fabrication process. Here, we provide an overview of SiC-based integrated photonics, presenting the latest progress on investigating its basic optical and optoelectronic properties, as well as the recent developments in the fabrication of several typical approaches for light confinement structures that form the basic building blocks for low-loss, high functional and industry-compatible integrated photonic platform. Moreover, recent works employing SiC as optically-readable spin hosts for quantum information applications are also summarized and discussed. As a still-developing integrated photonic platform, the prospects and challenges of SiC material platform in the field of integrated photonics are also discussed, followed by potential solutions.
△ Less
Submitted 9 May, 2022; v1 submitted 22 March, 2022;
originally announced March 2022.
-
Recent neutron focusing experiments using polycapillary lens in CSNS
Authors:
Kai Pan,
Xue-Peng Sun,
Tian-Cheng Yi,
Song-Ling Wang,
Jian-Rong Zhou,
Mo Zhou,
Xing-Fen Jiang,
Bin Zhou,
Bo-Wen Jiang,
Tian-Xi Sun,
Tian-Jiao Liang,
Zhi-Guo Liu
Abstract:
Higher neutron current densities can provide convenience for neutron experiments. Using neutron optical focusing elements, large flux beams transported to sample can be achieved. As one kind of focusing elements, polycapillary lens is very suitable for neutron absorption experiments such as PGAA and NDP technology. At present, a Neutron Physics and Application Spectrometer was in construction in C…
▽ More
Higher neutron current densities can provide convenience for neutron experiments. Using neutron optical focusing elements, large flux beams transported to sample can be achieved. As one kind of focusing elements, polycapillary lens is very suitable for neutron absorption experiments such as PGAA and NDP technology. At present, a Neutron Physics and Application Spectrometer was in construction in CSNS, which is the first pulsed neutron source in China. To provide some suggestions and ideas for the following design of enhanced PGAA or NDP instrument with polycapillary lens in CSNS, a first neutron focusing experiment using polycapillary lens in CSNS was conducted. For 0.5-12.6 polychromatic beam, a focal spot with FWHM of 800 was obtained. As the value of wavelength increased, the beam size, transmission efficiency and gain increased. For cold neutron, the gain maintained in a level of 7.
△ Less
Submitted 30 March, 2022; v1 submitted 17 March, 2022;
originally announced March 2022.
-
Laboratory observation of plasmoid-dominated magnetic reconnection in hybrid collisional-collisionless regime
Authors:
Z. H. Zhao,
H. H. An,
Y. Xie,
Z. Lei,
W. P. Yao,
W. Q. Yuan,
J. Xiong,
C. Wang,
J. J. Ye,
Z. Y. Xie,
Z. H. Fang,
A. L. Lei,
W. B. Pei,
X. T. He,
W. M. Zhou,
W. Wang,
S. P. Zhu,
B. Qiao
Abstract:
Magnetic reconnection, breaking and reorganization of magnetic field topology, is a fundamental process for rapid release of magnetic energy into plasma particles that occurs pervasively throughout the universe. In most natural circumstances, the plasma properties on either side of the reconnection layer are asymmetric, in particular for the collision rates that are associated with a combination o…
▽ More
Magnetic reconnection, breaking and reorganization of magnetic field topology, is a fundamental process for rapid release of magnetic energy into plasma particles that occurs pervasively throughout the universe. In most natural circumstances, the plasma properties on either side of the reconnection layer are asymmetric, in particular for the collision rates that are associated with a combination of density and temperature and critically determine the reconnection mechanism. To date, all laboratory experiments on magnetic reconnections have been limited to purely collisional or collisionless regimes. Here, we report a well-designed experimental investigation on asymmetric magnetic reconnections in a novel hybrid collisional-collisionless regime by interactions between laser-ablated Cu and CH plasmas. We show that the growth rate of the tearing instability in such a hybrid regime is still extremely large, resulting in rapid formation of multiple plasmoids, lower than that in the purely collisionless regime but much higher than the collisional case. In addition, we, for the first time, directly observe the topology evolutions of the whole process of plasmoid-dominated magnetic reconnections by using highly-resolved proton radiography.
△ Less
Submitted 24 February, 2022;
originally announced February 2022.
-
Evidence for mechanical softening-hardening dual anomaly in transition metals from shock compressed vanadium
Authors:
Hao Wang,
J. Li,
X. M. Zhou,
Y. Tan,
L. Hao,
Y. Y. Yu,
C. D. Dai,
K. Jin,
Q. Wu,
Q. M. Jing,
X. R. Chen,
X. Z. Yan,
Y. X. Wang,
Hua Y. Geng
Abstract:
Solid usually becomes harder and tougher under compression, and turns softer at elevated temperature. Recently, compression-induced softening and heating-induced hardening (CISHIH) dual anomaly was predicted in group VB elements such as vanadium. Here, the evidence for this counterintuitive phenomenon is reported. By using accurate high-temperature high-pressure sound velocities measured at Hugoni…
▽ More
Solid usually becomes harder and tougher under compression, and turns softer at elevated temperature. Recently, compression-induced softening and heating-induced hardening (CISHIH) dual anomaly was predicted in group VB elements such as vanadium. Here, the evidence for this counterintuitive phenomenon is reported. By using accurate high-temperature high-pressure sound velocities measured at Hugoniot states generated by shock-waves, together with first-principles calculations, we observe not only the prominent compression-induced sound velocity reduction, but also strong heating-induced sound velocity enhancement, in shocked vanadium. The former corresponds to the softening in shear modulus by compression, whereas the latter reflects the reverse hardening by heat. These experiments also unveil another anomaly in Young's modulus that wasn't reported before. Based on the experimental and theoretical data, we infer that vanadium might transition from BCC into two different rhombohedral (RH1 and RH2) phases at about 79GPa and 116GPa along the Hugoniot, respectively, which implies a dramatic difference in static and dynamic loading, as well as the significance of deviatoric stress and rate-relevant effects in high-pressure phase transition dynamics.
△ Less
Submitted 31 January, 2022;
originally announced January 2022.
-
Spontaneous magnetization of collisionless plasma through the action of a shear flow
Authors:
Muni Zhou,
Vladimir Zhdankin,
Matthew W. Kunz,
Nuno F. Loureiro,
Dmitri A. Uzdensky
Abstract:
We study in a fully kinetic framework the generation of seed magnetic fields through the Weibel instability driven in an initially unmagnetized plasma by a large-scale shear force. We develop an analytical model that describes the development of thermal pressure anisotropy via phase mixing, the ensuing exponential growth of magnetic fields in the linear Weibel stage, and its saturation when the se…
▽ More
We study in a fully kinetic framework the generation of seed magnetic fields through the Weibel instability driven in an initially unmagnetized plasma by a large-scale shear force. We develop an analytical model that describes the development of thermal pressure anisotropy via phase mixing, the ensuing exponential growth of magnetic fields in the linear Weibel stage, and its saturation when the seed magnetic fields become strong enough to instigate gyromotion of particles and thereby inhibit their free-streaming. The predicted scaling dependencies of the saturated seed fields on key parameters (e.g., ratio of system scale to electron skin depth, the forcing amplitude) are confirmed by 3D and 2D particle-in-cell simulations using an electron-positron plasma. This work demonstrates the spontaneous magnetization of a collisionless plasma through large-scale motions as simple as a shear flow, and therefore has important implications for magnetogenesis in dilute astrophysical systems.
△ Less
Submitted 3 October, 2021;
originally announced October 2021.
-
Local evaporation flux of deformed liquid drops
Authors:
Pan Jia,
Mo Zhou,
Haiping Yu,
Cunjing Lv,
Guangyin Jing
Abstract:
Escaping of the liquid molecules from their liquid bulk into the vapour phase at the vapour-liquid interface is controlled by the vapour diffusion process, which nevertheless hardly senses the macroscopic shape of this interface. Here, deformed sessile drops due to gravity and surface tension with various interfacial profiles are realised by tilting flat substrates. The symmetry broken of the sess…
▽ More
Escaping of the liquid molecules from their liquid bulk into the vapour phase at the vapour-liquid interface is controlled by the vapour diffusion process, which nevertheless hardly senses the macroscopic shape of this interface. Here, deformed sessile drops due to gravity and surface tension with various interfacial profiles are realised by tilting flat substrates. The symmetry broken of the sessile drop geometry leads to a different evaporation behavior compared to a drop with a symmetric cap on a horizontal substrate. Rather than the vapour-diffusion mechanism, heat-diffusion regime is defined here to calculate the local evaporation flux along the deformed drop interface. A local heat resistance, characterised by the liquid layer thickness perpendicular to the substrate, is proposed to relate the local evaporation flux. We find that the drops with and without deformation evaporate with a minimum flux at the drop apex, while up to a maximum one with a significantly larger but finite value at the contact line. Counterintuitively, the deviation from the symmetric shape due to the deformation on a slope, surprisingly enhances the total evaporation rate; and the smaller contact angle, the more significant enhancement. Larger tilt quickens the overall evaporation process and induces a more heterogeneous distribution of evaporative flux under gravity. Interestingly, with this concept of heat flux, an intrinsic heat resistance is conceivable around the contact line, which naturally removes the singularity of the evaporation flux showing in the vapour-diffusion model. The detailed non-uniform evaporation flux suggests ways to control the self-assembly, microstructures of deposit with engineering applications particularly in three dimensional printing where drying on slopes is inevitable.
△ Less
Submitted 17 August, 2021;
originally announced August 2021.
-
Efficient force field and energy emulation through partition of permutationally equivalent atoms
Authors:
Hao Li,
Musen Zhou,
Jessalyn Sebastian,
Jianzhong Wu,
Mengyang Gu
Abstract:
Gaussian process (GP) emulator has been used as a surrogate model for predicting force field and molecular potential, to overcome the computational bottleneck of molecular dynamics simulation. Integrating both atomic force and energy in predictions was found to be more accurate than using energy alone, yet it requires $O((NM)^3)$ computational operations for computing the likelihood function and m…
▽ More
Gaussian process (GP) emulator has been used as a surrogate model for predicting force field and molecular potential, to overcome the computational bottleneck of molecular dynamics simulation. Integrating both atomic force and energy in predictions was found to be more accurate than using energy alone, yet it requires $O((NM)^3)$ computational operations for computing the likelihood function and making predictions, where $N$ is the number of atoms and $M$ is the number of simulated configurations in the training sample, due to the inversion of a large covariance matrix. The large computational need limits its applications to emulating simulation of small molecules. The computational challenge of using both gradient information and function values in GPs was recently noticed in statistics and machine learning communities, where conventional approximation methods, such as the low rank decomposition or sparse approximation, may not work well. Here we introduce a new approach, the atomized force field (AFF) model, that integrates both force and energy in the emulator with many fewer computational operations. The drastic reduction on computation is achieved by utilizing the naturally sparse structure of the covariance satisfying the constraints of the energy conservation and permutation symmetry of atoms. The efficient machine learning algorithm extends the limits of its applications on larger molecules under the same computational budget, with nearly no loss of predictive accuracy. Furthermore, our approach contains uncertainty assessment of predictions of atomic forces and potentials, useful for developing a sequential design over the chemical input space, with almost no increase in computational cost.
△ Less
Submitted 9 May, 2022; v1 submitted 13 August, 2021;
originally announced August 2021.
-
On distributions of velocity random fields in turbulent flows
Authors:
Jiawei Li,
Zhongmin Qian,
Mingrui Zhou
Abstract:
The purpose of the present paper is to derive a partial differential equation (PDE) for the single-time single-point probability density function (PDF) of the velocity field of a turbulent flow. The PDF PDE is a highly non-linear parabolic-transport equation, which depends on two conditional statistical numerics of important physical significance. The PDF PDE is a general form of the classical Rey…
▽ More
The purpose of the present paper is to derive a partial differential equation (PDE) for the single-time single-point probability density function (PDF) of the velocity field of a turbulent flow. The PDF PDE is a highly non-linear parabolic-transport equation, which depends on two conditional statistical numerics of important physical significance. The PDF PDE is a general form of the classical Reynolds mean flow equation, and is a precise formulation of the PDF transport equation. The PDF PDE provides us with a new method for modelling turbulence. An explicit example is constructed, though the example is seemingly artificial, but it demonstrates the PDF method based on the new PDF PDE.
△ Less
Submitted 7 July, 2021;
originally announced July 2021.
-
Statistical description of coalescing magnetic islands via magnetic reconnection
Authors:
Muni Zhou,
David H. Wu,
Nuno F. Loureiro,
Dmitri A. Uzdensky
Abstract:
The physical picture of interacting magnetic islands provides a useful paradigm for certain plasma dynamics in a variety of physical environments, such as the solar corona, the heliosheath, and the Earth's magnetosphere. In this work, we derive an island kinetic equation to describe the evolution of the island distribution function (in area and in flux of islands) subject to a collisional integral…
▽ More
The physical picture of interacting magnetic islands provides a useful paradigm for certain plasma dynamics in a variety of physical environments, such as the solar corona, the heliosheath, and the Earth's magnetosphere. In this work, we derive an island kinetic equation to describe the evolution of the island distribution function (in area and in flux of islands) subject to a collisional integral designed to account for the role of magnetic reconnection during island mergers. This equation is used to study the inverse transfer of magnetic energy through the coalescence of magnetic islands in 2D. We solve our island kinetic equation numerically for three different types of initial distribution: delta-distribution, Gaussian and power-law distribution. The time evolution of several key quantities is found to agree well with our analytical predictions: magnetic energy decays as $\tilde t^{-1}$, the number of islands decreases as $\tilde t^{-1}$, and the averaged area of islands grows as $\tilde t$, where $\tilde t$ is the time normalized to the characteristic reconnection time scale of islands. General properties of the distribution function and the magnetic energy spectrum are also studied.
△ Less
Submitted 30 October, 2021; v1 submitted 28 April, 2021;
originally announced April 2021.
-
On the transport equation for probability density functions of turbulent vorticity fields
Authors:
Jiawei Li,
Zhongmin Qian,
Mingrui Zhou
Abstract:
The vorticity random field of turbulent flow is singled out as the main dynamical variable for the description of turbulence, and the evolution equation of the probability density function (PDF) of the vorticity field has been obtained. This PDF evolution equation is a mixed type partial differential equation (PDE) of second order which depends only on the conditional mean (first order) of the und…
▽ More
The vorticity random field of turbulent flow is singled out as the main dynamical variable for the description of turbulence, and the evolution equation of the probability density function (PDF) of the vorticity field has been obtained. This PDF evolution equation is a mixed type partial differential equation (PDE) of second order which depends only on the conditional mean (first order) of the underlying turbulent flow, which is in contrast with Reynolds' mean flow equation which relies on a quadratic statistics. Therefore the new PDF PDE may provide new closure scheme based on the conditional linear statistics, and some of them will be described in the present paper too.
△ Less
Submitted 1 December, 2021; v1 submitted 25 April, 2021;
originally announced April 2021.
-
Visible and Near-infrared Microdisk Resonators on a 4H-Silicon-Carbide-on-Insulator Platform
Authors:
Chengli Wang,
Chen Shen,
Ailun Yi,
Shumin Yang,
Liping Zhou,
Yifan Zhu,
Kai Huang,
Sannian Song,
Min Zhou,
Jiaxiang Zhang,
Xin Ou
Abstract:
Wavelength-sized microdisk resonators were fabricated on a single crystalline 4H-silicon-carbide-oninsulator platform (4H-SiCOI). By carrying out microphotoluminescence measurements at room temperature, we show that the microdisk resonators support whispering-gallery modes (WGMs) with quality factors up to $5.25 \times 10^3$ and mode volumes down to $2.69 \times(λ/n)^3$ at the visible and near-inf…
▽ More
Wavelength-sized microdisk resonators were fabricated on a single crystalline 4H-silicon-carbide-oninsulator platform (4H-SiCOI). By carrying out microphotoluminescence measurements at room temperature, we show that the microdisk resonators support whispering-gallery modes (WGMs) with quality factors up to $5.25 \times 10^3$ and mode volumes down to $2.69 \times(λ/n)^3$ at the visible and near-infrared wavelengths. Moreover, the demonstrated wavelength-sized microdisk resonators exhibit WGMs whose resonant wavelengths compatible with the zero-phonon lines of spin defects in 4H-SiCOI, making them a promising candidate for applications in cavity quantum electrodynamics and integrated quantum photonic circuits.
△ Less
Submitted 8 March, 2021;
originally announced March 2021.
-
Analyses of Laser Propagation Noises for TianQin Gravitational Wave Observatory Based on the Global Magnetosphere MHD Simulations
Authors:
Wei Su,
Yan Wang,
Chen Zhou,
Lingfeng Lu,
Ze-Bing Zhou,
T. Li,
Tong Shi,
Xin-Chun Hu,
Ming-Yue Zhou,
Ming Wang,
Hsien-Chi Yeh,
Han Wang,
P. F. Chen
Abstract:
TianQin is a proposed space-borne gravitational wave (GW) observatory composed of three identical satellites orbiting around the geocenter with a radius of $10^5$ km. It aims at detecting GWs in the frequency range of 0.1 mHz -- 1 Hz. The detection of GW relies on the high precision measurement of optical path length at $10^{-12}$~m level. The dispersion of space plasma can lead to the optical pat…
▽ More
TianQin is a proposed space-borne gravitational wave (GW) observatory composed of three identical satellites orbiting around the geocenter with a radius of $10^5$ km. It aims at detecting GWs in the frequency range of 0.1 mHz -- 1 Hz. The detection of GW relies on the high precision measurement of optical path length at $10^{-12}$~m level. The dispersion of space plasma can lead to the optical path difference (OPD, $Δl$) along the propagation of laser beams between any pair of satellites. Here, we study the OPD noises for TianQin. The Space Weather Modeling Framework is used to simulate the interaction between the Earth magnetosphere and solar wind. From the simulations, we extract the magnetic field and plasma parameters on the orbits of TianQin at four relative positions of the satellite constellation in the Earth magnetosphere. We calculate the OPD noise for single link, Michelson combination, and Time-Delay Interferometry (TDI) combinations ($α$ and $X$). For single link and Michelson interferometer, the maxima of $|Δl|$ are on the order of 1 pm. For the TDI combinations, these can be suppressed to about 0.004 and 0.008 pm for $α$ and $X$. The OPD noise of the Michelson combination is colored in the concerned frequency range; while the ones for the TDI combinations are approximately white. Furthermore, we calculate the ratio of the equivalent strain of the OPD noise to that of TQ, and find that the OPD noises for the TDI combinations can be neglected in the most sensitive frequency range of TQ.
△ Less
Submitted 28 April, 2021; v1 submitted 21 February, 2021;
originally announced February 2021.
-
Cavity-Enhanced Atom-Photon Entanglement with Subsecond Lifetime
Authors:
Xu-Jie Wang,
Sheng-Jun Yang,
Peng-Fei Sun,
Bo Jing,
Jun Li,
Ming-Ti Zhou,
Xiao-Hui Bao,
Jian-Wei Pan
Abstract:
A cold atomic ensemble suits well for optical quantum memories, and its entanglement with a single photon forms the building block for quantum networks that give promise for many revolutionary applications. Efficiency and lifetime are among the most important figures of merit for a memory. In this paper, we report the realization of entanglement between an atomic ensemble and a single-photon with…
▽ More
A cold atomic ensemble suits well for optical quantum memories, and its entanglement with a single photon forms the building block for quantum networks that give promise for many revolutionary applications. Efficiency and lifetime are among the most important figures of merit for a memory. In this paper, we report the realization of entanglement between an atomic ensemble and a single-photon with subsecond lifetime and high efficiency. We engineer dual control modes in a ring cavity to create entanglement and make use of 3-dimensional optical lattice to prolong memory lifetime. The memory efficiency is 38% for 0.1 second storage. We verify the atom-photon entanglement after 1 second storage by testing the Bell inequality with a result of $S=2.36\pm0.14$.
△ Less
Submitted 6 January, 2021;
originally announced January 2021.
-
Experimental Creation of Single Rydberg Excitations via Adiabatic Passage
Authors:
Ming-Ti Zhou,
Jian-Long Liu,
Peng-Fei Sun,
Zi-Ye An,
Jun Li,
Xiao-Hui Bao,
Jian-Wei Pan
Abstract:
In an atomic ensemble, quantum information is typically carried as single collective excitations. It is very advantageous if the creation of single excitations is efficient and robust. Rydberg blockade enables deterministic creation of single excitations via collective Rabi oscillation by precisely controlling the pulse area, being sensitive to many experimental parameters. In this paper, we imple…
▽ More
In an atomic ensemble, quantum information is typically carried as single collective excitations. It is very advantageous if the creation of single excitations is efficient and robust. Rydberg blockade enables deterministic creation of single excitations via collective Rabi oscillation by precisely controlling the pulse area, being sensitive to many experimental parameters. In this paper, we implement the adiabatic rapid passage technique to the Rydberg excitation process in a mesoscopic atomic ensemble. We make use of a two-photon excitation scheme with an intermediate state off-resonant and sweep the laser frequency of one excitation laser. We find the chirped scheme preserves internal phases of the collective Rydberg excitation and be more robust against variance of laser intensity and frequency detuning.
△ Less
Submitted 6 January, 2021;
originally announced January 2021.
-
Epidemic Plateau: A Phenomenon under Adaptive Prevention Strategies
Authors:
Hao Liao,
Ziqiang Wu,
Alexandre Vidmer,
Mingyang Zhou,
Wei Chen
Abstract:
Since the beginning of the COVID-19 spreading, the number of studies on the epidemic models increased dramatically. It is important for policymakers to know how the disease will spread and what are the effects of the policies and environment on the spreading. In this paper, we propose two extensions to the standard SIR model: (a) we consider the prevention measures adopted based on the current sev…
▽ More
Since the beginning of the COVID-19 spreading, the number of studies on the epidemic models increased dramatically. It is important for policymakers to know how the disease will spread and what are the effects of the policies and environment on the spreading. In this paper, we propose two extensions to the standard SIR model: (a) we consider the prevention measures adopted based on the current severity of the infection. Those measures are adaptive and change over time; (b) multiple cities and regions are considered, with population movements between those cities and regions, while taking into account that each region may have different prevention measures. Although the adaptive measures and mobility of the population were often observed during the pandemic, these effects are rarely explicitly modeled and studied in the classical epidemic models. The model we propose gives rise to a plateau phenomenon: the number of people infected by the disease stays at the same level during an extended period of time. We show what are conditions need to be met in order for the spreading to exhibit a plateau period in a single city. In addition, this phenomenon is interdependent when considering multiple cities. We verify from the real-world data that the plateau phenomenon does exist in many regions of the world in the current COVID-19 development. Finally, we provide theoretical analysis on the plateau phenomenon for the single-city model and derive a series of results on the emergence and the ending of the plateau, as well as on the height and length of the plateau. Our theoretical results match well with our experimental findings.
△ Less
Submitted 4 January, 2022; v1 submitted 6 November, 2020;
originally announced November 2020.
-
The ABC130 barrel module prototyping programme for the ATLAS strip tracker
Authors:
Luise Poley,
Craig Sawyer,
Sagar Addepalli,
Anthony Affolder,
Bruno Allongue,
Phil Allport,
Eric Anderssen,
Francis Anghinolfi,
Jean-François Arguin,
Jan-Hendrik Arling,
Olivier Arnaez,
Nedaa Alexandra Asbah,
Joe Ashby,
Eleni Myrto Asimakopoulou,
Naim Bora Atlay,
Ludwig Bartsch,
Matthew J. Basso,
James Beacham,
Scott L. Beaupré,
Graham Beck,
Carl Beichert,
Laura Bergsten,
Jose Bernabeu,
Prajita Bhattarai,
Ingo Bloch
, et al. (224 additional authors not shown)
Abstract:
For the Phase-II Upgrade of the ATLAS Detector, its Inner Detector, consisting of silicon pixel, silicon strip and transition radiation sub-detectors, will be replaced with an all new 100 % silicon tracker, composed of a pixel tracker at inner radii and a strip tracker at outer radii. The future ATLAS strip tracker will include 11,000 silicon sensor modules in the central region (barrel) and 7,000…
▽ More
For the Phase-II Upgrade of the ATLAS Detector, its Inner Detector, consisting of silicon pixel, silicon strip and transition radiation sub-detectors, will be replaced with an all new 100 % silicon tracker, composed of a pixel tracker at inner radii and a strip tracker at outer radii. The future ATLAS strip tracker will include 11,000 silicon sensor modules in the central region (barrel) and 7,000 modules in the forward region (end-caps), which are foreseen to be constructed over a period of 3.5 years. The construction of each module consists of a series of assembly and quality control steps, which were engineered to be identical for all production sites. In order to develop the tooling and procedures for assembly and testing of these modules, two series of major prototyping programs were conducted: an early program using readout chips designed using a 250 nm fabrication process (ABCN-25) and a subsequent program using a follow-up chip set made using 130 nm processing (ABC130 and HCC130 chips). This second generation of readout chips was used for an extensive prototyping program that produced around 100 barrel-type modules and contributed significantly to the development of the final module layout. This paper gives an overview of the components used in ABC130 barrel modules, their assembly procedure and findings resulting from their tests.
△ Less
Submitted 7 September, 2020;
originally announced September 2020.
-
Inverse energy transfer in decaying, three dimensional, nonhelical magnetic turbulence due to magnetic reconnection
Authors:
Pallavi Bhat,
Muni Zhou,
Nuno F. Loureiro
Abstract:
It has been recently shown numerically that there exists an inverse transfer of magnetic energy in decaying, nonhelical, magnetically dominated, magnetohydrodynamic turbulence in 3-dimensions (3D). We suggest that magnetic reconnection is the underlying physical mechanism responsible for this inverse transfer. In the two-dimensional (2D) case, the inverse transfer is easily inferred to be due to s…
▽ More
It has been recently shown numerically that there exists an inverse transfer of magnetic energy in decaying, nonhelical, magnetically dominated, magnetohydrodynamic turbulence in 3-dimensions (3D). We suggest that magnetic reconnection is the underlying physical mechanism responsible for this inverse transfer. In the two-dimensional (2D) case, the inverse transfer is easily inferred to be due to smaller magnetic islands merging to form larger ones via reconnection. We find that the scaling behaviour is similar between the 2D and the 3D cases, i.e., the magnetic energy evolves as $t^{-1}$, and the magnetic power spectrum follows a slope of $k^{-2}$. We show that on normalizing time by the magnetic reconnection timescale, the evolution curves of the magnetic field in systems with different Lundquist numbers collapse onto one another. Furthermore, transfer function plots show signatures of magnetic reconnection driving the inverse transfer. We also discuss the conserved quantities in the system and show that the behaviour of these quantities is similar between the 2D and 3D simulations, thus making the case that the dynamics in 3D could be approximately explained by what we understand in 2D. Lastly, we also conduct simulations where the magnetic field is subdominant to the flow. Here, too, we find an inverse transfer of magnetic energy in 3D. In these simulations, the magnetic energy evolves as $ t^{-1.4}$ and, interestingly, a dynamo effect is observed.
△ Less
Submitted 14 July, 2020;
originally announced July 2020.
-
Significant Contribution of Projectile Excited States to the Stopping of Slow Helium Ions in Hydrogen Plasma
Authors:
Y. T. Zhao,
Y. N. Zhang,
R. Cheng,
B. He,
C. L. Liu,
X. M. Zhou,
Y. Lei,
Y. Y. Wang,
J. R. Ren,
X. Wang,
Y. H. Chen,
G. Q. Xiao,
S. M. Savin,
R. Gavrilin,
A. A. Golubev,
D. H. H. Hoffmann
Abstract:
The energy deposition and the atomic processes, such as the electron-capture, ionization, excitation and radiative-decays for slow heavy ions in plasma remains an unsolved fundamental problem. Here we investigate, both experimentally and theoretically, the stopping of 100 keV=u helium ions in a well-defined hydrogen plasma. Our precise measurements show a much higher energy loss than the predictio…
▽ More
The energy deposition and the atomic processes, such as the electron-capture, ionization, excitation and radiative-decays for slow heavy ions in plasma remains an unsolved fundamental problem. Here we investigate, both experimentally and theoretically, the stopping of 100 keV=u helium ions in a well-defined hydrogen plasma. Our precise measurements show a much higher energy loss than the predictions of the semi-classical approaches with the commonly used effective charge. By solving the Time Dependent Rate Equation (TDRE) with all the main projectile states and for all relevant atomic processes, our calculations are in remarkable agreement with the experimental data. We also demonstrated that, acting as a bridge for electron-capture and ionization, the projectile excited states and their radiative decays can remarkably influence the equilibrium charge states and consequently lead to a substantial increasing of the stopping of ions in plasma.
△ Less
Submitted 2 June, 2020;
originally announced June 2020.
-
Deep Learning for Feynman's Path Integral in Strong-Field Time-Dependent Dynamics
Authors:
Xiwang Liu,
Guojun Zhang,
Jie Li,
Guangluo Shi,
Mingyang Zhou,
Boqiang Huang,
Yajuan Tang,
Xiaohong Song,
Weifeng Yang
Abstract:
Feynman's path integral approach is to sum over all possible spatio-temporal paths to reproduce the quantum wave function and the corresponding time evolution, which has enormous potential to reveal quantum processes in classical view. However, the complete characterization of quantum wave function with infinite paths is a formidable challenge, which greatly limits the application potential, espec…
▽ More
Feynman's path integral approach is to sum over all possible spatio-temporal paths to reproduce the quantum wave function and the corresponding time evolution, which has enormous potential to reveal quantum processes in classical view. However, the complete characterization of quantum wave function with infinite paths is a formidable challenge, which greatly limits the application potential, especially in the strong-field physics and attosecond science. Instead of brute-force tracking every path one by one, here we propose deep-learning-performed strong-field Feynman's formulation with pre-classification scheme which can predict directly the final results only with data of initial conditions, so as to attack unsurmountable tasks by existing strong-field methods and explore new physics. Our results build up a bridge between deep learning and strong-field physics through the Feynman's path integral, which would boost applications of deep learning to study the ultrafast time-dependent dynamics in strong-field physics and attosecond science, and shed a new light on the quantum-classical correspondence.
△ Less
Submitted 28 February, 2020; v1 submitted 23 February, 2020;
originally announced February 2020.
-
Experimental Syntheses of Sodalite-like Clathrate EuH$_6$ and EuH$_9$ at Extreme Pressures
Authors:
Liang Ma,
Guangtao Liu,
Yingying Wang,
Mi Zhou,
Hanyu Liu,
Feng Peng,
Hongbo Wang,
Yanming Ma
Abstract:
The recent discovery of a class of sodalite-like clathrate superhydrides (e.g., YH6, YH9, ThH9, ThH10, and LaH10) at extreme pressures, which exhibit commonly a high-temperature superconductivity with the highest Tc approaching 260 K for LaH10, opened up a new era in search of high-temperature superconductors in metal superhydrides. There is a high interest towards the finding of alternative clath…
▽ More
The recent discovery of a class of sodalite-like clathrate superhydrides (e.g., YH6, YH9, ThH9, ThH10, and LaH10) at extreme pressures, which exhibit commonly a high-temperature superconductivity with the highest Tc approaching 260 K for LaH10, opened up a new era in search of high-temperature superconductors in metal superhydrides. There is a high interest towards the finding of alternative clathrate superhydrides that might witness the long-dreamed room-temperature superconductivity. Here, we target on the experimental synthesis of strongly-correlated europium (Eu) superhydrides where theory can fail for the prediction of superconductivity. We pressurized and laser-heated the mixture of metal Eu and ammonia borane (NH3BH3) in a diamond anvil cell and successfully synthesized the sodalite-like clathrate EuH6 and EuH9 at conditions of 152 GPa and 1,700 K, and 170 GPa and 2,800 K, respectively. Two non-clathrate structured phases of EuH5 and EuH6 were also synthesized that are not reported in lanthanide superhydrides. Calculated large H-derived electronic density of states at the Fermi level in clathrate EuH6 implies the potential of high temperature superconductivity. Our work created a model superhydride platform for subsequent investigation on how strongly-correlated effect in electronic structure can affect the superconductivity of superhydrides, a phenomenon that is not known thus far.
△ Less
Submitted 23 February, 2020;
originally announced February 2020.
-
Solving high-dimensional eigenvalue problems using deep neural networks: A diffusion Monte Carlo like approach
Authors:
Jiequn Han,
Jianfeng Lu,
Mo Zhou
Abstract:
We propose a new method to solve eigenvalue problems for linear and semilinear second order differential operators in high dimensions based on deep neural networks. The eigenvalue problem is reformulated as a fixed point problem of the semigroup flow induced by the operator, whose solution can be represented by Feynman-Kac formula in terms of forward-backward stochastic differential equations. The…
▽ More
We propose a new method to solve eigenvalue problems for linear and semilinear second order differential operators in high dimensions based on deep neural networks. The eigenvalue problem is reformulated as a fixed point problem of the semigroup flow induced by the operator, whose solution can be represented by Feynman-Kac formula in terms of forward-backward stochastic differential equations. The method shares a similar spirit with diffusion Monte Carlo but augments a direct approximation to the eigenfunction through neural-network ansatz. The criterion of fixed point provides a natural loss function to search for parameters via optimization. Our approach is able to provide accurate eigenvalue and eigenfunction approximations in several numerical examples, including Fokker-Planck operator and the linear and nonlinear Schrödinger operators in high dimensions.
△ Less
Submitted 15 July, 2020; v1 submitted 6 February, 2020;
originally announced February 2020.
-
Investigation upon the performance of piezoelectric energy harvester with elastic extensions
Authors:
Maoying Zhou,
Yang Fu,
Huawei Ji
Abstract:
Piezoelectric vibration energy harvesters have attracted much attention due to its potential to replace currently popular batteries and to provide an sustainable power sources. Many researchers have proposed ways to increase the performance of piezoelectric energy harvesters like bandwidth, working frequency and output performance. Here in this contribution, we propose the method of using elastic…
▽ More
Piezoelectric vibration energy harvesters have attracted much attention due to its potential to replace currently popular batteries and to provide an sustainable power sources. Many researchers have proposed ways to increase the performance of piezoelectric energy harvesters like bandwidth, working frequency and output performance. Here in this contribution, we propose the method of using elastic extensions to tune the performance of a piezoelectric energy harvester. Mathematical model of the proposed device is derived and analyzed. Numerical simulations are done to investigate the influences of the derived parameters, like length ratio λ_l , bending stiffness ratio λ_B , and line density ratio λ_m . Results show that the elastic extension does change the motion of the proposed device and help tune the performance of piezoelectric energy harvesters.
△ Less
Submitted 26 October, 2019;
originally announced January 2020.
-
Multi-scale dynamics of magnetic flux tubes and inverse magnetic energy transfer
Authors:
Muni Zhou,
Nuno F. Loureiro,
Dmitri A. Uzdensky
Abstract:
We report on an analytical and numerical study of the dynamics of a three-dimensional array of identical magnetic flux tubes in the reduced-magnetohydrodynamic description of the plasma. We propose that the long-time evolution of this system is dictated by flux-tube mergers and that such mergers are dynamically constrained by the conservation of the pertinent (ideal) invariants, {\it viz.} the mag…
▽ More
We report on an analytical and numerical study of the dynamics of a three-dimensional array of identical magnetic flux tubes in the reduced-magnetohydrodynamic description of the plasma. We propose that the long-time evolution of this system is dictated by flux-tube mergers and that such mergers are dynamically constrained by the conservation of the pertinent (ideal) invariants, {\it viz.} the magnetic potential and axial fluxes of each tube. We also propose that in the direction perpendicular to the merging plane, flux tubes evolve in critically-balanced fashion. These notions allow us to construct an analytical model for how quantities such as the magnetic energy and the energy-containing scale evolve as functions of time. Of particular importance is the conclusion that, like its two-dimensional counterpart, this system exhibits an inverse transfer of magnetic energy that terminates only at the system scale. We perform direct numerical simulations that confirm these predictions and reveal other interesting aspects of the evolution of the system. We find, for example, that the early time evolution is characterized by a sharp decay of the initial magnetic energy, which we attribute to the ubiquitous formation of current sheets. We also show that a quantitatively similar inverse transfer of magnetic energy is observed when the initial condition is a random, small-scale magnetic seed field.
△ Less
Submitted 13 June, 2020; v1 submitted 20 January, 2020;
originally announced January 2020.
-
Neuromorphic Metasurface
Authors:
Zhicheng Wu,
Ming Zhou,
Erfan Khoram,
Boyuan Liu,
Zongfu Yu
Abstract:
Metasurfaces have been used to realize optical functions such as focusing and beam steering. They use sub-wavelength nanostructures to control the local amplitude and phase of light. Here we show that such control could also enable a new function of artificial neural inference. We demonstrate that metasurfaces can directly recognize objects by focusing light from an object to different spatial loc…
▽ More
Metasurfaces have been used to realize optical functions such as focusing and beam steering. They use sub-wavelength nanostructures to control the local amplitude and phase of light. Here we show that such control could also enable a new function of artificial neural inference. We demonstrate that metasurfaces can directly recognize objects by focusing light from an object to different spatial locations that correspond to the class of the object.
△ Less
Submitted 13 August, 2019;
originally announced September 2019.
-
Universality of lower hybrid waves at Earth's magnetopause
Authors:
D. B. Graham,
Yu. V. Khotyaintsev,
C. Norgren,
A. Vaivads,
M. Andre,
J. F. Drake,
J. Egedal,
M. Zhou,
O. Le Contel,
J. M. Webster,
B. Lavraud,
I. Kacem,
V. Genot,
C. Jacquey,
A. C. Rager,
D. J. Gershman,
J. L. Burch,
R. E. Ergun
Abstract:
Waves around the lower hybrid frequency are frequently observed at Earth's magnetopause, and readily reach very large amplitudes. Determining the properties of lower hybrid waves is crucial because they are thought to contribute to electron and ion heating, cross-field particle diffusion, anomalous resistivity, and energy transfer between electrons and ions. All these processes could play an impor…
▽ More
Waves around the lower hybrid frequency are frequently observed at Earth's magnetopause, and readily reach very large amplitudes. Determining the properties of lower hybrid waves is crucial because they are thought to contribute to electron and ion heating, cross-field particle diffusion, anomalous resistivity, and energy transfer between electrons and ions. All these processes could play an important role in magnetic reconnection at the magnetopause and the evolution of the boundary layer. In this paper, the properties of lower hybrid waves at Earth's magnetopause are investigated using the Magnetospheric Multiscale (MMS) mission. For the first time, the properties of the waves are investigated using fields and direct particle measurements. The highest-resolution electron moments resolve the velocity and density fluctuations of lower hybrid waves, confirming that electrons remain approximately frozen in at lower hybrid wave frequencies. Using fields and particle moments the dispersion relation is constructed and the wave-normal angle is estimated to be close to $90^{\circ}$ to the background magnetic field. The waves are shown to have a finite parallel wave vector, suggesting that they can interact with parallel propagating electrons. The observed wave properties are shown to agree with theoretical predictions, the previously used single-spacecraft method, and four-spacecraft timing analyses. These results show that single-spacecraft methods can accurately determine lower hybrid wave properties.
△ Less
Submitted 28 August, 2019;
originally announced August 2019.
-
Retrieval of non-sparse object through scattering media beyond the memory effect
Authors:
Meiling Zhou,
An Pan,
Runze Li,
Yansheng Liang,
Junwei Min,
Tong Peng,
Chen Bai,
Baoli Yao
Abstract:
Optical imaging through scattering media is a commonly confronted with the problem of reconstruction of complex objects and optical memory effect. To solve the problem, here, we propose a novel configuration based on the combination of ptychography and shower-curtain effect, which enables the retrieval of non-sparse samples through scattering media beyond the memory effect. Furthermore, by virtue…
▽ More
Optical imaging through scattering media is a commonly confronted with the problem of reconstruction of complex objects and optical memory effect. To solve the problem, here, we propose a novel configuration based on the combination of ptychography and shower-curtain effect, which enables the retrieval of non-sparse samples through scattering media beyond the memory effect. Furthermore, by virtue of the shower-curtain effect, the proposed imaging system is insensitive to dynamic scattering media. Results from the retrieval of hair follicle section demonstrate the effectiveness and feasibility of the proposed method. The field of view is improved to 2.64mm. This present technique will be a potential approach for imaging through deep biological tissue.
△ Less
Submitted 20 July, 2019;
originally announced July 2019.
-
Extended range of dipole-dipole interactions in periodically structured photonic media
Authors:
Lei Ying,
Ming Zhou,
Michael Mattei,
Boyuan Liu,
Paul Campagnola,
Randall H. Goldsmith,
Zongfu Yu
Abstract:
The interaction between quantum two-level systems is typically short-range in free space and most photonic environments. Here we show that diminishing momentum isosurfaces with equal frequencies can create a significantly extended range of interaction between distant quantum systems. The extended range is robust and does not rely on a specific location or orientation of the transition dipoles. A g…
▽ More
The interaction between quantum two-level systems is typically short-range in free space and most photonic environments. Here we show that diminishing momentum isosurfaces with equal frequencies can create a significantly extended range of interaction between distant quantum systems. The extended range is robust and does not rely on a specific location or orientation of the transition dipoles. A general relation between the interaction range and properties of the isosurface is described for structured photonic media. It provides a new way to mediate long-range quantum behavior.
△ Less
Submitted 24 October, 2019; v1 submitted 19 June, 2019;
originally announced June 2019.
-
Learning the optimally coordinated routes from the statistical mechanics of polymers
Authors:
Hao Liao,
Xingtong Wu,
Mingyang Zhou,
Chi Ho Yeung
Abstract:
Many major cities suffer from severe traffic congestion. Road expansion in the cites is usually infeasible, and an alternative way to alleviate traffic congestion is to coordinate the route of vehicles. Various path selection and planning algorithms are thus proposed, but most existing methods only plan paths separately and provide un-coordinated solutions. Recently, an analogy between the coordin…
▽ More
Many major cities suffer from severe traffic congestion. Road expansion in the cites is usually infeasible, and an alternative way to alleviate traffic congestion is to coordinate the route of vehicles. Various path selection and planning algorithms are thus proposed, but most existing methods only plan paths separately and provide un-coordinated solutions. Recently, an analogy between the coordination of vehicular routes and the interaction of polymers is drawn; the spin glass theory in statistical physics is employed to optimally coordinate transportation routes. To further examine the advantages brought by path coordination, we incorporate the link congestion function developed by the Bureau of Public Roads (BPR) into the polymer routing algorithm. We then estimate in simulations the traveling time of all users saved by the polymer-BPR algorithm in randomly generated networks and real transportation networks in major cities including London, New York and Beijing. We found that a large amount of traveling time is saved in all studied networks, suggesting that the approach inspired by polymer physics is effective in minimizing the traveling time via path coordination, which is a promising tool for alleviating traffic congestions.
△ Less
Submitted 3 June, 2019; v1 submitted 31 May, 2019;
originally announced June 2019.
-
Temporal similarity metrics for latent network reconstruction: The role of time-lag decay
Authors:
Hao Liao,
Ming-Kai Liu,
Manuel Sebastian Mariani,
Mingyang Zhou,
Xingtong Wu
Abstract:
When investigating the spreading of a piece of information or the diffusion of an innovation, we often lack information on the underlying propagation network. Reconstructing the hidden propagation paths based on the observed diffusion process is a challenging problem which has recently attracted attention from diverse research fields. To address this reconstruction problem, based on static similar…
▽ More
When investigating the spreading of a piece of information or the diffusion of an innovation, we often lack information on the underlying propagation network. Reconstructing the hidden propagation paths based on the observed diffusion process is a challenging problem which has recently attracted attention from diverse research fields. To address this reconstruction problem, based on static similarity metrics commonly used in the link prediction literature, we introduce new node-node temporal similarity metrics. The new metrics take as input the time-series of multiple independent spreading processes, based on the hypothesis that two nodes are more likely to be connected if they were often infected at similar points in time. This hypothesis is implemented by introducing a time-lag function which penalizes distant infection times. We find that the choice of this time-lag strongly affects the metrics' reconstruction accuracy, depending on the network's clustering coefficient and we provide an extensive comparative analysis of static and temporal similarity metrics for network reconstruction. Our findings shed new light on the notion of similarity between pairs of nodes in complex networks.
△ Less
Submitted 4 April, 2019;
originally announced April 2019.
-
Neutron diagnostics for the physics of a high-field, compact, $Q\geq1$ tokamak
Authors:
R. A. Tinguely,
A. Rosenthal,
R. Simpson,
S. B. Ballinger,
A. J. Creely,
S. Frank,
A. Q. Kuang,
B. L. Linehan,
W. McCarthy,
L. M. Milanese,
K. J. Montes,
T. Mouratidis,
J. F. Picard,
P. Rodriguez-Fernandez,
A. J. Sandberg,
F. Sciortino,
E. A. Tolman,
M. Zhou,
B. N. Sorbom,
Z. S. Hartwig,
A. E. White
Abstract:
Advancements in high temperature superconducting technology have opened a path toward high-field, compact fusion devices. This new parameter space introduces both opportunities and challenges for diagnosis of the plasma. This paper presents a physics review of a neutron diagnostic suite for a SPARC-like tokamak [Greenwald et al 2018 doi:10.7910/DVN/OYYBNU]. A notional neutronics model was construc…
▽ More
Advancements in high temperature superconducting technology have opened a path toward high-field, compact fusion devices. This new parameter space introduces both opportunities and challenges for diagnosis of the plasma. This paper presents a physics review of a neutron diagnostic suite for a SPARC-like tokamak [Greenwald et al 2018 doi:10.7910/DVN/OYYBNU]. A notional neutronics model was constructed using plasma parameters from a conceptual device, called the MQ1 (Mission $Q \geq 1$) tokamak. The suite includes time-resolved micro-fission chamber (MFC) neutron flux monitors, energy-resolved radial and tangential magnetic proton recoil (MPR) neutron spectrometers, and a neutron camera system (radial and off-vertical) for spatially-resolved measurements of neutron emissivity. Geometries of the tokamak, neutron source, and diagnostics were modeled in the Monte Carlo N-Particle transport code MCNP6 to simulate expected signal and background levels of particle fluxes and energy spectra. From these, measurements of fusion power, neutron flux and fluence are feasible by the MFCs, and the number of independent measurements required for 95% confidence of a fusion gain $Q \geq 1$ is assessed. The MPR spectrometer is found to consistently overpredict the ion temperature and also have a 1000$\times$ improved detection of alpha knock-on neutrons compared to previous experiments. The deuterium-tritium fuel density ratio, however, is measurable in this setup only for trace levels of tritium, with an upper limit of $n_T/n_D \approx 6\%$, motivating further diagnostic exploration. Finally, modeling suggests that in order to adequately measure the self-heating profile, the neutron camera system will require energy and pulse-shape discrimination to suppress otherwise overwhelming fluxes of low energy neutrons and gamma radiation.
*Co-first-authorship
△ Less
Submitted 22 March, 2019;
originally announced March 2019.
-
Magnetic island merger as a mechanism for inverse magnetic energy transfer
Authors:
Muni Zhou,
Pallavi Bhat,
Nuno F. Loureiro,
Dmitri A. Uzdensky
Abstract:
Magnetic energy transfer from small to large scales due to successive magnetic island coalescence is investigated. A solvable analytical model is introduced and shown to correctly capture the evolution of the main quantities of interest, as borne out by numerical simulations. Magnetic reconnection is identified as the key mechanism enabling the inverse transfer, and setting its properties: magneti…
▽ More
Magnetic energy transfer from small to large scales due to successive magnetic island coalescence is investigated. A solvable analytical model is introduced and shown to correctly capture the evolution of the main quantities of interest, as borne out by numerical simulations. Magnetic reconnection is identified as the key mechanism enabling the inverse transfer, and setting its properties: magnetic energy decays as $\tilde t^{-1}$, where $\tilde t$ is time normalized to the (appropriately defined) reconnection timescale; and the correlation length of the field grows as $\tilde t^{1/2}$. The magnetic energy spectrum is self-similar, and evolves as $\propto \tilde t ^{-3/2}k^{-2}$, where the $k$-dependence is imparted by the formation of thin current sheets.
△ Less
Submitted 8 January, 2019;
originally announced January 2019.
-
Scattering Statistics in Nonlinear Wave Chaotic Systems
Authors:
Min Zhou,
Edward Ott,
Thomas M. Antonsen, Jr.,
Steven M. Anlage
Abstract:
The Random Coupling Model (RCM) is a statistical approach for studying the scattering properties of linear wave chaotic systems in the semi-classical regime. Its success has been experimentally verified in various over-moded wave settings, including both microwave and acoustic systems. It is of great interest to extend its use to nonlinear systems. This paper studies the impact of a nonlinear port…
▽ More
The Random Coupling Model (RCM) is a statistical approach for studying the scattering properties of linear wave chaotic systems in the semi-classical regime. Its success has been experimentally verified in various over-moded wave settings, including both microwave and acoustic systems. It is of great interest to extend its use to nonlinear systems. This paper studies the impact of a nonlinear port on the measured statistical electromagnetic properties of a ray-chaotic complex enclosure in the short wavelength limit. A Vector Network Analyzer is upgraded with a high power option which enables calibrated scattering (S) parameter measurements up to +43 dBm. By attaching a diode to the excitation antenna, amplitude-dependent S-parameters are observed. We have systematically studied how the key components in the RCM are affected by this nonlinear port, including the radiation impedance, short ray orbit corrections, and statistical properties. By applying the newly developed radiation efficiency extension to the RCM, we find that the diode admittance increases with excitation amplitude. This reduces the amount of power entering the cavity through the port, so that the diode effectively acts as a protection element.
△ Less
Submitted 13 December, 2018;
originally announced December 2018.
-
Beam-controlled spectral-selective architecture with planar polydimethylsiloxane/metal-films for all-day radiative cooling
Authors:
Lyu Zhou,
Haomin Song,
Jianwei Liang,
Matthew Singer,
Ming Zhou,
Edgars Stegenburgs,
Nan Zhang,
Chen Xu,
Tien Khee Ng,
Zongfu Yu,
Boon Ooi,
Qiaoqiang Gan
Abstract:
Radiative cooling is a passive cooling strategy with zero consumption of electricity. Although this technology can work well during optimal atmospheric conditions at nighttime, it is essential to achieve efficient radiative cooling during daytime when peak cooling demand actually occurs. In this article, we report an inexpensive planar polydimethylsiloxane (PDMS)/metal thermal emitter, i.e., a thi…
▽ More
Radiative cooling is a passive cooling strategy with zero consumption of electricity. Although this technology can work well during optimal atmospheric conditions at nighttime, it is essential to achieve efficient radiative cooling during daytime when peak cooling demand actually occurs. In this article, we report an inexpensive planar polydimethylsiloxane (PDMS)/metal thermal emitter, i.e., a thin film structure fabricated using fast solution coating process that is scalable for large area manufacturing. By manipulating the beaming effect of the thermal radiation, temperature reduction of 9.5 °C and 11.0 °C were demonstrated in the laboratory and out-door environment, respectively. In addition, a spectral-selective solar shelter architecture was designed and implemented to suppress the solar input during the daytime. Due to the enhanced directionality of the thermal emission, the dependence of the radiative cooling performance on the surrounding environment was minimized. Out-door experiments were performed in Buffalo NY, realizing continuous all-day radiative cooling with an average power of ~120 W/m2 on a typical clear sunny day at Northern United States latitudes. This practical passive cooling strategy that cools without any electricity input could have a significant impact on global energy consumption.
△ Less
Submitted 28 September, 2018;
originally announced October 2018.