-
Wavefront Curvature in Optical Atomic Beam Clocks
Authors:
A. Strathearn,
R. F. Offer,
A. P. Hilton,
E. Klantsataya,
A. N. Luiten,
R. P. Anderson,
B. M. Sparkes,
T. M. Stace
Abstract:
Atomic clocks provide a reproducible basis for our understanding of time and frequency. Recent demonstrations of compact optical clocks, employing thermal atomic beams, have achieved short-term fractional frequency instabilities in the $10^{-16}$, competitive with the best international frequency standards available. However, a serious challenge inherent in compact clocks is the necessarily smalle…
▽ More
Atomic clocks provide a reproducible basis for our understanding of time and frequency. Recent demonstrations of compact optical clocks, employing thermal atomic beams, have achieved short-term fractional frequency instabilities in the $10^{-16}$, competitive with the best international frequency standards available. However, a serious challenge inherent in compact clocks is the necessarily smaller optical beams, which results in rapid variation in interrogating wavefronts. This can cause inhomogeneous excitation of the thermal beam leading to long term drifts in the output frequency. Here we develop a model for Ramsey-Bordé interferometery using optical fields with curved wavefronts and simulate the $^{40}$Ca beam clock experiment described in [Olson et al., Phys. Rev. Lett. 123, 073202 (2019)]. Olson et al.'s results had shown surprising and unexplained behaviour in the response of the atoms in the interrogation. Our model predicts signals consistent with experimental data and can account for the significant sensitivity to laser geometry that was reported. We find the signal-to-noise ratio is maximised when the laser is uncollimated at the interrogation zones to minimise inhomogeneity, and also identify an optimal waist size determined by both laser inhomogeneity and the velocity distribution of the atomic beam. We investigate the shifts and stability of the clock frequency, showing that the Gouy phase is the primary source of frequency variations arising from laser geometry.
△ Less
Submitted 24 January, 2023; v1 submitted 1 December, 2022;
originally announced December 2022.
-
High-Effciency Cross-Phase Modulation in a Gas-Filled Waveguide
Authors:
C. Perrella,
P. S. Light,
J. D. Anstie,
F. Benabid,
T. M. Stace,
A. G. White,
A. N. Luiten
Abstract:
Strong cross-Kerr non-linearities have been long sought after for quantum information applications. Recent work has shown that they are intrinsically unreliable in travelling wave configurations: cavity configurations avoid this, but require knowledge of both the non-linearity and the loss. Here we present a detailed systematic study of cross-phase modulation, and absorption, in a rubidium vapour…
▽ More
Strong cross-Kerr non-linearities have been long sought after for quantum information applications. Recent work has shown that they are intrinsically unreliable in travelling wave configurations: cavity configurations avoid this, but require knowledge of both the non-linearity and the loss. Here we present a detailed systematic study of cross-phase modulation, and absorption, in a rubidium vapour confined within a hollow-core photonic crystal fibre. Using a two-photon transition, we observe phase modulations of up to $π$rad with a signal power of 25$μ$W, corresponding to a non-linear Kerr coefficient, $n_2$, of $0.8 \times 10^{-6}$ cm$^2$/W, or $1.3 \times 10^{-6}$ rad per photon.
△ Less
Submitted 18 June, 2013;
originally announced June 2013.
-
Optimized coupling of cold atoms into a fiber using a blue-detuned hollow-beam funnel
Authors:
Jerome Poulin,
Philip S. Light,
Raman Kashyap,
Andre N. Luiten
Abstract:
We theoretically investigate the process of coupling cold atoms into the core of a hollow-core photonic-crystal optical fiber using a blue-detuned Laguerre-Gaussian beam. In contrast to the use of a red-detuned Gaussian beam to couple the atoms, the blue-detuned hollow-beam can confine cold atoms to the darkest regions of the beam thereby minimizing shifts in the internal states and making the gui…
▽ More
We theoretically investigate the process of coupling cold atoms into the core of a hollow-core photonic-crystal optical fiber using a blue-detuned Laguerre-Gaussian beam. In contrast to the use of a red-detuned Gaussian beam to couple the atoms, the blue-detuned hollow-beam can confine cold atoms to the darkest regions of the beam thereby minimizing shifts in the internal states and making the guide highly robust to heating effects. This single optical beam is used as both a funnel and guide to maximize the number of atoms into the fiber. In the proposed experiment, Rb atoms are loaded into a magneto-optical trap (MOT) above a vertically-oriented optical fiber. We observe a gravito-optical trapping effect for atoms with high orbital momentum around the trap axis, which prevents atoms from coupling to the fiber: these atoms lack the kinetic energy to escape the potential and are thus trapped in the laser funnel indefinitely. We find that by reducing the dipolar force to the point at which the trapping effect just vanishes, it is possible to optimize the coupling of atoms into the fiber. Our simulations predict that by using a low-power (2.5 mW) and far-detuned (300 GHz) Laguerre-Gaussian beam with a 20-μm radius core hollow-fiber it is possible to couple 11% of the atoms from a MOT 9 mm away from the fiber. When MOT is positioned further away, coupling efficiencies over 50% can be achieved with larger core fibers.
△ Less
Submitted 24 July, 2011;
originally announced July 2011.
-
Long Term Operation and Performance of Cryogenic Sapphire Oscillators
Authors:
M. E. Tobar,
E. N. Ivanov,
C. R. Locke,
P. L. Stanwix,
J. G. Hartnett,
A. N. Luiten,
R. B. Warrington,
P. T. H. Fisk,
M. A. Lawn,
M. J. Wouters,
S. Bize,
G. Santarelli,
P. Wolf,
A. Clairon,
P. Guillemot
Abstract:
Cryogenic Sapphire Oscillators (CSO) developed at UWA have now been in operation around the world continuously for many years. Such oscillators, due to their excellent spectral purity are essential for interrogating atomic frequency standards at the limit of quantum projection noise; otherwise aliasing effects will dominate the frequency stability due to the periodic sampling between successive…
▽ More
Cryogenic Sapphire Oscillators (CSO) developed at UWA have now been in operation around the world continuously for many years. Such oscillators, due to their excellent spectral purity are essential for interrogating atomic frequency standards at the limit of quantum projection noise; otherwise aliasing effects will dominate the frequency stability due to the periodic sampling between successive interrogations of the atomic transition. For this reason, UWA oscillators are now operational at NMI (Sydney), LNE-SYRTE (Paris), the French Space Agency (CNES, Toulouse) and at UWA (Perth). Other applications, which have attracted attention in recent years, include tests on fundamental principles of physics, such as tests of Lorentz invariance. This paper reports on the long-term operation and performance of such oscillators. We compare the long-term drift of some different CSOs. The drift rates turn out to be linear over many years and in the same direction. However, the magnitude seems to vary by more than one order of magnitude between the oscillators, ranging from 10^14 per day to a few parts in 10^13 per day.
△ Less
Submitted 19 August, 2006;
originally announced August 2006.
-
Long-distance frequency dissemination with a resolution of 10-17
Authors:
Christophe Daussy,
Olivier Lopez,
Anne Amy-Klein,
Andréi N. Goncharov,
Mickael Guinet,
Christian Chardonnet,
François Narbonneau,
Michel Lours,
Damien Chambon,
Sébastien Bize,
André Clairon,
Georgio Santarelli,
Mike E. Tobar,
Andre N. Luiten
Abstract:
We use a new technique to disseminate microwave reference signals along ordinary optical fiber. The fractional frequency resolution of a link of 86 km in length is 10-17 for a one day integration time, a resolution higher than the stability of the best microwave or optical clocks. We use the link to compare the microwave reference and a CO2/OsO4 frequency standard that stabilizes a femtosecond l…
▽ More
We use a new technique to disseminate microwave reference signals along ordinary optical fiber. The fractional frequency resolution of a link of 86 km in length is 10-17 for a one day integration time, a resolution higher than the stability of the best microwave or optical clocks. We use the link to compare the microwave reference and a CO2/OsO4 frequency standard that stabilizes a femtosecond laser frequency comb. This demonstrates a resolution of 3.10-14 at 1 s. An upper value of the instability introduced by the femtosecond laser-based synthesizer is estimated as 1.10-14 at 1 s.
△ Less
Submitted 17 June, 2005;
originally announced June 2005.
