-
High-Efficiency Low-Noise Optomechanical Crystal Photon-Phonon Transducers
Authors:
Sameer Sonar,
Utku Hatipoglu,
Srujan Meesala,
David Lake,
Hengjiang Ren,
Oskar Painter
Abstract:
Optomechanical crystals (OMCs) enable coherent interactions between optical photons and microwave acoustic phonons, and represent a platform for implementing quantum transduction between microwave and optical signals. Optical absorption-induced thermal noise at cryogenic (millikelvin) temperatures is one of the primary limitations of performance for OMC-based quantum transducers. Here, we address…
▽ More
Optomechanical crystals (OMCs) enable coherent interactions between optical photons and microwave acoustic phonons, and represent a platform for implementing quantum transduction between microwave and optical signals. Optical absorption-induced thermal noise at cryogenic (millikelvin) temperatures is one of the primary limitations of performance for OMC-based quantum transducers. Here, we address this challenge with a two-dimensional silicon OMC resonator that is side-coupled to a mechanically detached optical waveguide, realizing a six-fold reduction in the heating rate of the acoustic resonator compared to prior state-of-the-art, while operating in a regime of high optomechanical-backaction and millikelvin base temperature. This reduced heating translates into a demonstrated phonon-to-photon conversion efficiency of 93.1 $\pm$ 0.8% at an added noise of 0.25 $\pm$ 0.01 quanta, representing a significant advance toward quantum-limited microwave-optical frequency conversion and optically-controlled quantum acoustic memories.
△ Less
Submitted 21 June, 2024;
originally announced June 2024.
-
Quantum entanglement between optical and microwave photonic qubits
Authors:
Srujan Meesala,
David Lake,
Steven Wood,
Piero Chiappina,
Changchun Zhong,
Andrew D. Beyer,
Matthew D. Shaw,
Liang Jiang,
Oskar Painter
Abstract:
Entanglement is an extraordinary feature of quantum mechanics. Sources of entangled optical photons were essential to test the foundations of quantum physics through violations of Bell's inequalities. More recently, entangled many-body states have been realized via strong non-linear interactions in microwave circuits with superconducting qubits. Here we demonstrate a chip-scale source of entangled…
▽ More
Entanglement is an extraordinary feature of quantum mechanics. Sources of entangled optical photons were essential to test the foundations of quantum physics through violations of Bell's inequalities. More recently, entangled many-body states have been realized via strong non-linear interactions in microwave circuits with superconducting qubits. Here we demonstrate a chip-scale source of entangled optical and microwave photonic qubits. Our device platform integrates a piezo-optomechanical transducer with a superconducting resonator which is robust under optical illumination. We drive a photon-pair generation process and employ a dual-rail encoding intrinsic to our system to prepare entangled states of microwave and optical photons. We place a lower bound on the fidelity of the entangled state by measuring microwave and optical photons in two orthogonal bases. This entanglement source can directly interface telecom wavelength time-bin qubits and GHz frequency superconducting qubits, two well-established platforms for quantum communication and computation, respectively.
△ Less
Submitted 22 December, 2023; v1 submitted 20 December, 2023;
originally announced December 2023.
-
Phonon engineering of atomic-scale defects in superconducting quantum circuits
Authors:
Mo Chen,
John Clai Owens,
Harald Putterman,
Max Schäfer,
Oskar Painter
Abstract:
Noise within solid-state systems at low temperatures, where many of the degrees of freedom of the host material are frozen out, can typically be traced back to material defects that support low-energy excitations. These defects can take a wide variety of microscopic forms, and for amorphous materials are broadly described using generic models such as the tunneling two-level systems (TLS) model. Al…
▽ More
Noise within solid-state systems at low temperatures, where many of the degrees of freedom of the host material are frozen out, can typically be traced back to material defects that support low-energy excitations. These defects can take a wide variety of microscopic forms, and for amorphous materials are broadly described using generic models such as the tunneling two-level systems (TLS) model. Although the details of TLS, and their impact on the low-temperature behavior of materials have been studied since the 1970s, these states have recently taken on further relevance in the field of quantum computing, where the limits to the coherence of superconducting microwave quantum circuits are dominated by TLS. Efforts to mitigate the impact of TLS have thus far focused on circuit design, material selection, and material surface treatment. In this work, we take a new approach that seeks to directly modify the properties of TLS through nanoscale-engineering. This is achieved by periodically structuring the host material, forming an acoustic bandgap that suppresses all microwave-frequency phonons in a GHz-wide frequency band around the operating frequency of a transmon qubit superconducting quantum circuit. For embedded TLS that are strongly coupled to the electric qubit, we measure a pronounced increase in relaxation time by two orders of magnitude when the TLS transition frequency lies within the acoustic bandgap, with the longest $T_1$ time exceeding $5$ milliseconds. Our work paves the way for in-depth investigation and coherent control of TLS, which is essential for deepening our understanding of noise in amorphous materials and advancing solid-state quantum devices.
△ Less
Submitted 5 October, 2023;
originally announced October 2023.
-
Demonstrating a long-coherence dual-rail erasure qubit using tunable transmons
Authors:
Harry Levine,
Arbel Haim,
Jimmy S. C. Hung,
Nasser Alidoust,
Mahmoud Kalaee,
Laura DeLorenzo,
E. Alex Wollack,
Patricio Arrangoiz-Arriola,
Amirhossein Khalajhedayati,
Rohan Sanil,
Hesam Moradinejad,
Yotam Vaknin,
Aleksander Kubica,
David Hover,
Shahriar Aghaeimeibodi,
Joshua Ari Alcid,
Christopher Baek,
James Barnett,
Kaustubh Bawdekar,
Przemyslaw Bienias,
Hugh Carson,
Cliff Chen,
Li Chen,
Harut Chinkezian,
Eric M. Chisholm
, et al. (88 additional authors not shown)
Abstract:
Quantum error correction with erasure qubits promises significant advantages over standard error correction due to favorable thresholds for erasure errors. To realize this advantage in practice requires a qubit for which nearly all errors are such erasure errors, and the ability to check for erasure errors without dephasing the qubit. We demonstrate that a "dual-rail qubit" consisting of a pair of…
▽ More
Quantum error correction with erasure qubits promises significant advantages over standard error correction due to favorable thresholds for erasure errors. To realize this advantage in practice requires a qubit for which nearly all errors are such erasure errors, and the ability to check for erasure errors without dephasing the qubit. We demonstrate that a "dual-rail qubit" consisting of a pair of resonantly coupled transmons can form a highly coherent erasure qubit, where transmon $T_1$ errors are converted into erasure errors and residual dephasing is strongly suppressed, leading to millisecond-scale coherence within the qubit subspace. We show that single-qubit gates are limited primarily by erasure errors, with erasure probability $p_\text{erasure} = 2.19(2)\times 10^{-3}$ per gate while the residual errors are $\sim 40$ times lower. We further demonstrate mid-circuit detection of erasure errors while introducing $< 0.1\%$ dephasing error per check. Finally, we show that the suppression of transmon noise allows this dual-rail qubit to preserve high coherence over a broad tunable operating range, offering an improved capacity to avoid frequency collisions. This work establishes transmon-based dual-rail qubits as an attractive building block for hardware-efficient quantum error correction.
△ Less
Submitted 20 March, 2024; v1 submitted 17 July, 2023;
originally announced July 2023.
-
Non-classical microwave-optical photon pair generation with a chip-scale transducer
Authors:
Srujan Meesala,
Steven Wood,
David Lake,
Piero Chiappina,
Changchun Zhong,
Andrew D. Beyer,
Matthew D. Shaw,
Liang Jiang,
Oskar Painter
Abstract:
Modern computing and communication technologies such as supercomputers and the internet are based on optically connected networks of microwave frequency information processors. In recent years, an analogous architecture has emerged for quantum networks with optically distributed entanglement between remote superconducting quantum processors, a leading platform for quantum computing. Here we report…
▽ More
Modern computing and communication technologies such as supercomputers and the internet are based on optically connected networks of microwave frequency information processors. In recent years, an analogous architecture has emerged for quantum networks with optically distributed entanglement between remote superconducting quantum processors, a leading platform for quantum computing. Here we report an important milestone towards such networks by observing non-classical correlations between photons in an optical link and a superconducting electrical circuit. We generate such states of light through a spontaneous parametric down-conversion (SPDC) process in a chip-scale piezo-optomechanical transducer. The non-classical nature of the emitted light is verified by observing anti-bunching in the microwave state conditioned on detection of an optical photon. Such a transducer can be readily connected to a superconducting quantum processor, and serve as a key building block for optical quantum networks of microwave frequency qubits.
△ Less
Submitted 30 March, 2023;
originally announced March 2023.
-
Design of an ultra-low mode volume piezo-optomechanical quantum transducer
Authors:
Piero Chiappina,
Jash Banker,
Srujan Meesala,
David Lake,
Steven Wood,
Oskar Painter
Abstract:
Coherent transduction of quantum states from the microwave to the optical domain can play a key role in quantum networking and distributed quantum computing. We present the design of a piezo-optomechanical device formed in a hybrid lithium niobate on silicon platform, that is suitable for microwave-to-optical quantum transduction. Our design is based on acoustic hybridization of an ultra-low mode…
▽ More
Coherent transduction of quantum states from the microwave to the optical domain can play a key role in quantum networking and distributed quantum computing. We present the design of a piezo-optomechanical device formed in a hybrid lithium niobate on silicon platform, that is suitable for microwave-to-optical quantum transduction. Our design is based on acoustic hybridization of an ultra-low mode volume piezoacoustic cavity with an optomechanical crystal cavity. The strong piezoelectric nature of lithium niobate allows us to mediate transduction via an acoustic mode which only minimally interacts with the lithium niobate, and is predominantly silicon-like, with very low electrical and acoustic loss. We estimate that this transducer can realize an intrinsic conversion efficiency of up to 35% with <0.5 added noise quanta when resonantly coupled to a superconducting transmon qubit and operated in pulsed mode at 10 kHz repetition rate. The performance improvement gained in such hybrid lithium niobate-silicon transducers make them suitable for heralded entanglement of qubits between superconducting quantum processors connected by optical fiber links.
△ Less
Submitted 26 June, 2023; v1 submitted 7 March, 2023;
originally announced March 2023.
-
A scalable superconducting quantum simulator with long-range connectivity based on a photonic bandgap metamaterial
Authors:
Xueyue Zhang,
Eunjong Kim,
Daniel K. Mark,
Soonwon Choi,
Oskar Painter
Abstract:
Synthesis of many-body quantum systems in the laboratory can help provide further insight into the emergent behavior of quantum materials, whose properties may provide improved methods for energy conversion, signal transport, or information processing. While the majority of engineerable many-body systems, or quantum simulators, consist of particles on a lattice with local interactions, quantum sys…
▽ More
Synthesis of many-body quantum systems in the laboratory can help provide further insight into the emergent behavior of quantum materials, whose properties may provide improved methods for energy conversion, signal transport, or information processing. While the majority of engineerable many-body systems, or quantum simulators, consist of particles on a lattice with local interactions, quantum systems featuring long-range interactions are particularly challenging to model and interesting to study due to the rapid spatio-temporal growth of quantum entanglement and correlations. Here, we present a scalable quantum simulator architecture based on a linear array of superconducting qubits locally connected to an extensible photonic-bandgap metamaterial. The metamaterial acts both as a quantum bus mediating qubit-qubit interactions, and as a readout channel for multiplexed qubit-state measurement. As an initial demonstration, we realize a 10-qubit simulator of the one-dimensional Bose-Hubbard model with in situ tunability of both the hopping range and the on-site interaction. We characterize the Hamiltonian of the system using a measurement-efficient protocol based on quantum many-body chaos. Further, we study the many-body quench dynamics of the system, revealing through global bit-string statistics the predicted crossover from integrability to ergodicity as the hopping range increases. The metamaterial quantum bus architecture presented here can be extended to two-dimensional lattice systems and used to generate a wide range of qubit interactions, expanding the accessible Hamiltonians for analog quantum simulation and increasing the flexibility in implementing quantum circuits for gate-based computations
△ Less
Submitted 18 August, 2022; v1 submitted 26 June, 2022;
originally announced June 2022.
-
Deterministic Generation of Multidimensional Photonic Cluster States with a Single Quantum Emitter
Authors:
Vinicius S. Ferreira,
Gihwan Kim,
Andreas Butler,
Hannes Pichler,
Oskar Painter
Abstract:
Multidimensional photonic graph states, such as cluster states, have prospective applications in quantum metrology, secure quantum communication, and measurement-based quantum computation. However, to date, generation of multidimensional cluster states of photonic qubits has relied on probabilistic methods that limit the scalability of typical generation schemes in optical systems. Here we present…
▽ More
Multidimensional photonic graph states, such as cluster states, have prospective applications in quantum metrology, secure quantum communication, and measurement-based quantum computation. However, to date, generation of multidimensional cluster states of photonic qubits has relied on probabilistic methods that limit the scalability of typical generation schemes in optical systems. Here we present an experimental implementation in the microwave domain of a resource-efficient scheme for the deterministic generation of 2D photonic cluster states. By utilizing a coupled resonator array as a slow-light waveguide, a single flux-tunable transmon qubit as a quantum emitter, and a second auxiliary transmon as a switchable mirror, we achieve rapid, shaped emission of entangled photon wavepackets, and selective time-delayed feedback of photon wavepackets to the emitter qubit. We leverage these capabilities to generate a 2D cluster state of four photons with 70\% fidelity, as verified by tomographic reconstruction of the quantum state. We discuss how our scheme could be straightforwardly extended to the generation of even larger cluster states, of even higher dimension, thereby expanding the scope and practical utility of such states for quantum information processing tasks.
△ Less
Submitted 20 June, 2022;
originally announced June 2022.
-
Stabilizing a Bosonic Qubit using Colored Dissipation
Authors:
Harald Putterman,
Joseph Iverson,
Qian Xu,
Liang Jiang,
Oskar Painter,
Fernando G. S. L. Brandão,
Kyungjoo Noh
Abstract:
Protected qubits such as the 0-$π$ qubit, and bosonic qubits including cat qubits and GKP qubits offer advantages for fault-tolerance. Some of these protected qubits (e.g., 0-$π$ qubit and Kerr cat qubit) are stabilized by Hamiltonians which have (near-)degenerate ground state manifolds with large energy-gaps to the excited state manifolds. Without dissipative stabilization mechanisms the performa…
▽ More
Protected qubits such as the 0-$π$ qubit, and bosonic qubits including cat qubits and GKP qubits offer advantages for fault-tolerance. Some of these protected qubits (e.g., 0-$π$ qubit and Kerr cat qubit) are stabilized by Hamiltonians which have (near-)degenerate ground state manifolds with large energy-gaps to the excited state manifolds. Without dissipative stabilization mechanisms the performance of such energy-gap-protected qubits can be limited by leakage to excited states. Here, we propose a scheme for dissipatively stabilizing an energy-gap-protected qubit using colored (i.e., frequency-selective) dissipation without inducing errors in the ground state manifold. Concretely we apply our colored dissipation technique to Kerr cat qubits and propose colored Kerr cat qubits which are protected by an engineered colored single-photon loss. When applied to the Kerr cat qubits our scheme significantly suppresses leakage-induced bit-flip errors (which we show are a limiting error mechanism) while only using linear interactions. Beyond the benefits to the Kerr cat qubit we also show that our frequency-selective loss technique can be applied to a broader class of protected qubits.
△ Less
Submitted 21 March, 2022; v1 submitted 19 July, 2021;
originally announced July 2021.
-
Building a fault-tolerant quantum computer using concatenated cat codes
Authors:
Christopher Chamberland,
Kyungjoo Noh,
Patricio Arrangoiz-Arriola,
Earl T. Campbell,
Connor T. Hann,
Joseph Iverson,
Harald Putterman,
Thomas C. Bohdanowicz,
Steven T. Flammia,
Andrew Keller,
Gil Refael,
John Preskill,
Liang Jiang,
Amir H. Safavi-Naeini,
Oskar Painter,
Fernando G. S. L. Brandão
Abstract:
We present a comprehensive architectural analysis for a proposed fault-tolerant quantum computer based on cat codes concatenated with outer quantum error-correcting codes. For the physical hardware, we propose a system of acoustic resonators coupled to superconducting circuits with a two-dimensional layout. Using estimated physical parameters for the hardware, we perform a detailed error analysis…
▽ More
We present a comprehensive architectural analysis for a proposed fault-tolerant quantum computer based on cat codes concatenated with outer quantum error-correcting codes. For the physical hardware, we propose a system of acoustic resonators coupled to superconducting circuits with a two-dimensional layout. Using estimated physical parameters for the hardware, we perform a detailed error analysis of measurements and gates, including CNOT and Toffoli gates. Having built a realistic noise model, we numerically simulate quantum error correction when the outer code is either a repetition code or a thin rectangular surface code. Our next step toward universal fault-tolerant quantum computation is a protocol for fault-tolerant Toffoli magic state preparation that significantly improves upon the fidelity of physical Toffoli gates at very low qubit cost. To achieve even lower overheads, we devise a new magic-state distillation protocol for Toffoli states. Combining these results together, we obtain realistic full-resource estimates of the physical error rates and overheads needed to run useful fault-tolerant quantum algorithms. We find that with around 1,000 superconducting circuit components, one could construct a fault-tolerant quantum computer that can run circuits which are currently intractable for classical computers. Hardware with 18,000 superconducting circuit components, in turn, could simulate the Hubbard model in a regime beyond the reach of classical computing.
△ Less
Submitted 27 January, 2022; v1 submitted 7 December, 2020;
originally announced December 2020.
-
Topological phonon transport in an optomechanical system
Authors:
Hengjiang Ren,
Tirth Shah,
Hannes Pfeifer,
Christian Brendel,
Vittorio Peano,
Florian Marquardt,
Oskar Painter
Abstract:
Recent advances in cavity-optomechanics have now made it possible to use light not just as a passive measuring device of mechanical motion, but also to manipulate the motion of mechanical objects down to the level of individual quanta of vibrations (phonons). At the same time, microfabrication techniques have enabled small-scale optomechanical circuits capable of on-chip manipulation of mechanical…
▽ More
Recent advances in cavity-optomechanics have now made it possible to use light not just as a passive measuring device of mechanical motion, but also to manipulate the motion of mechanical objects down to the level of individual quanta of vibrations (phonons). At the same time, microfabrication techniques have enabled small-scale optomechanical circuits capable of on-chip manipulation of mechanical and optical signals. Building on these developments, theoretical proposals have shown that larger scale optomechanical arrays can be used to modify the propagation of phonons, realizing a form of topologically protected phonon transport. Here, we report the observation of topological phonon transport within a multiscale optomechanical crystal structure consisting of an array of over $800$ cavity-optomechanical elements. Using sensitive, spatially resolved optical read-out we detect thermal phonons in a $0.325-0.34$GHz band traveling along a topological edge channel, with substantial reduction in backscattering. This represents an important step from the pioneering macroscopic mechanical systems work towards topological phononic systems at the nanoscale, where hypersonic frequency ($\gtrsim$GHz) acoustic wave circuits consisting of robust delay lines and non-reciprocal elements may be implemented. Owing to the broadband character of the topological channels, the control of the flow of heat-carrying phonons, albeit at cryogenic temperatures, may also be envisioned.
△ Less
Submitted 13 September, 2020;
originally announced September 2020.
-
Quantum electrodynamics in a topological waveguide
Authors:
Eunjong Kim,
Xueyue Zhang,
Vinicius S. Ferreira,
Jash Banker,
Joseph K. Iverson,
Alp Sipahigil,
Miguel Bello,
Alejandro Gonzalez-Tudela,
Mohammad Mirhosseini,
Oskar Painter
Abstract:
While designing the energy-momentum relation of photons is key to many linear, non-linear, and quantum optical phenomena, a new set of light-matter properties may be realized by employing the topology of the photonic bath itself. In this work we investigate the properties of superconducting qubits coupled to a metamaterial waveguide based on a photonic analog of the Su-Schrieffer-Heeger model. We…
▽ More
While designing the energy-momentum relation of photons is key to many linear, non-linear, and quantum optical phenomena, a new set of light-matter properties may be realized by employing the topology of the photonic bath itself. In this work we investigate the properties of superconducting qubits coupled to a metamaterial waveguide based on a photonic analog of the Su-Schrieffer-Heeger model. We explore topologically-induced properties of qubits coupled to such a waveguide, ranging from the formation of directional qubit-photon bound states to topology-dependent cooperative radiation effects. Addition of qubits to this waveguide system also enables direct quantum control over topological edge states that form in finite waveguide systems, useful for instance in constructing a topologically protected quantum communication channel. More broadly, our work demonstrates the opportunity that topological waveguide-QED systems offer in the synthesis and study of many-body states with exotic long-range quantum correlations.
△ Less
Submitted 7 May, 2020;
originally announced May 2020.
-
Quantum transduction of optical photons from a superconducting qubit
Authors:
Mohammad Mirhosseini,
Alp Sipahigil,
Mahmoud Kalaee,
Oskar Painter
Abstract:
Bidirectional conversion of electrical and optical signals lies at the foundation of the global internet. Such converters are employed at repeater stations to extend the reach of long-haul fiber optic communication systems and within data centers to exchange high-speed optical signals between computers. Likewise, coherent microwave-to-optical conversion of single photons would enable the exchange…
▽ More
Bidirectional conversion of electrical and optical signals lies at the foundation of the global internet. Such converters are employed at repeater stations to extend the reach of long-haul fiber optic communication systems and within data centers to exchange high-speed optical signals between computers. Likewise, coherent microwave-to-optical conversion of single photons would enable the exchange of quantum states between remotely connected superconducting quantum processors, a promising quantum computing hardware platform. Despite the prospects of quantum networking, maintaining the fragile quantum state in such a conversion process with superconducting qubits has remained elusive. Here we demonstrate the conversion of a microwave-frequency excitation of a superconducting transmon qubit into an optical photon. We achieve this using an intermediary nanomechanical resonator which converts the electrical excitation of the qubit into a single phonon by means of a piezoelectric interaction, and subsequently converts the phonon to an optical photon via radiation pressure. We demonstrate optical photon generation from the qubit with a signal-to-noise greater than unity by recording quantum Rabi oscillations of the qubit through single-photon detection of the emitted light over an optical fiber. With proposed improvements in the device and external measurement set-up, such quantum transducers may lead to practical devices capable of realizing new hybrid quantum networks, and ultimately, distributed quantum computers.
△ Less
Submitted 9 April, 2020;
originally announced April 2020.
-
Collapse and Revival of an Artificial Atom Coupled to a Structured Photonic Reservoir
Authors:
Vinicius S. Ferreira,
Jash Banker,
Alp Sipahigil,
Matthew H. Matheny,
Andrew J. Keller,
Eunjong Kim,
Mohammad Mirhosseini,
Oskar Painter
Abstract:
A structured electromagnetic reservoir can result in novel dynamics of quantum emitters. In particular, the reservoir can be tailored to have a memory of past interactions with emitters, in contrast to memory-less Markovian dynamics of typical open systems. In this Article, we investigate the non-Markovian dynamics of a superconducting qubit strongly coupled to a superconducting slow-light wavegui…
▽ More
A structured electromagnetic reservoir can result in novel dynamics of quantum emitters. In particular, the reservoir can be tailored to have a memory of past interactions with emitters, in contrast to memory-less Markovian dynamics of typical open systems. In this Article, we investigate the non-Markovian dynamics of a superconducting qubit strongly coupled to a superconducting slow-light waveguide reservoir. Tuning the qubit into the spectral vicinity of the passband of this waveguide, we find non-exponential energy relaxation as well as substantial changes to the qubit emission rate. Further, upon addition of a reflective boundary to one end of the waveguide, we observe revivals in the qubit population on a timescale 30 times longer than the inverse of the qubit's emission rate, corresponding to the round-trip travel time of an emitted photon. By tuning of the qubit-waveguide interaction strength, we probe a crossover between Markovian and non-Markovian qubit emission dynamics. These attributes allow for future studies of multi-qubit circuits coupled to structured reservoirs, in addition to constituting the necessary resources for generation of multiphoton highly entangled states.
△ Less
Submitted 9 January, 2020;
originally announced January 2020.
-
Efficient microwave frequency conversion mediated by the vibrational motion of a silicon nitride nanobeam oscillator
Authors:
J. M. Fink,
M. Kalaee,
R. Norte,
A. Pitanti,
O. Painter
Abstract:
Microelectromechanical systems and integrated photonics provide the basis for many reliable and compact circuit elements in modern communication systems. Electro-opto-mechanical devices are currently one of the leading approaches to realize ultra-sensitive, low-loss transducers for an emerging quantum information technology. Here we present an on-chip microwave frequency converter based on a plana…
▽ More
Microelectromechanical systems and integrated photonics provide the basis for many reliable and compact circuit elements in modern communication systems. Electro-opto-mechanical devices are currently one of the leading approaches to realize ultra-sensitive, low-loss transducers for an emerging quantum information technology. Here we present an on-chip microwave frequency converter based on a planar aluminum on silicon nitride platform that is compatible with slot-mode coupled photonic crystal cavities. We show efficient frequency conversion between two propagating microwave modes mediated by the radiation pressure interaction with a metalized dielectric nanobeam oscillator. We achieve bidirectional coherent conversion with a total device efficiency of up to ~ 60 %, a dynamic range of $2\times10^9$ photons/s and an instantaneous bandwidth of up to 1.7 kHz. A high fidelity quantum state transfer would be possible if the drive dependent output noise of currently $\sim14$ photons$\ \cdot\ $s$^{-1}\ \cdot\ $Hz$^{-1}$ is further reduced. Such a silicon nitride based transducer is in-situ reconfigurable and could be used for on-chip classical and quantum signal routing and filtering, both for microwave and hybrid microwave-optical applications.
△ Less
Submitted 27 November, 2019;
originally announced November 2019.
-
Two-Dimensional Optomechanical Crystal Cavity with High Quantum Cooperativity
Authors:
Hengjiang Ren,
Matthew H. Matheny,
Greg S. MacCabe,
Jie Luo,
Hannes Pfeifer,
Mohammad Mirhosseini,
Oskar Painter
Abstract:
Optomechanical systems offer new opportunities in quantum information processing and quantum sensing. Many solid-state quantum devices operate at millikelvin temperatures -- however, it has proven challenging to operate nanoscale optomechanical devices at these ultralow temperatures due to their limited thermal conductance and parasitic optical absorption. Here, we demonstrate a two-dimensional op…
▽ More
Optomechanical systems offer new opportunities in quantum information processing and quantum sensing. Many solid-state quantum devices operate at millikelvin temperatures -- however, it has proven challenging to operate nanoscale optomechanical devices at these ultralow temperatures due to their limited thermal conductance and parasitic optical absorption. Here, we demonstrate a two-dimensional optomechanical crystal resonator capable of achieving large cooperativity $C$ and small effective bath occupancy $n_b$, resulting in a quantum cooperativity $C_{\text{eff}}\equiv C/n_b \approx 1.3 > 1$ under continuous-wave optical driving. This is realized using a two-dimensional phononic bandgap structure to host the optomechanical cavity, simultaneously isolating the acoustic mode of interest in the bandgap while allowing heat to be removed by phonon modes outside of the bandgap. This achievement paves the way for a variety of applications requiring quantum-coherent optomechanical interactions, such as transducers capable of bi-directional conversion of quantum states between microwave frequency superconducting quantum circuits and optical photons in a fiber optic network.
△ Less
Submitted 7 October, 2019;
originally announced October 2019.
-
Phononic bandgap nano-acoustic cavity with ultralong phonon lifetime
Authors:
Gregory S. MacCabe,
Hengjiang Ren,
Jie Luo,
Justin D. Cohen,
Hengyun Zhou,
Alp Sipahigil,
Mohammad Mirhosseini,
Oskar Painter
Abstract:
We present measurements at millikelvin temperatures of the microwave-frequency acoustic properties of a crystalline silicon nanobeam cavity incorporating a phononic bandgap clamping structure for acoustic confinement. Utilizing pulsed laser light to excite a co-localized optical mode of the nanobeam cavity, we measure the dynamics of cavity acoustic modes with single-phonon sensitivity. Energy rin…
▽ More
We present measurements at millikelvin temperatures of the microwave-frequency acoustic properties of a crystalline silicon nanobeam cavity incorporating a phononic bandgap clamping structure for acoustic confinement. Utilizing pulsed laser light to excite a co-localized optical mode of the nanobeam cavity, we measure the dynamics of cavity acoustic modes with single-phonon sensitivity. Energy ringdown measurements for the fundamental $5$~GHz acoustic mode of the cavity shows an exponential increase in phonon lifetime versus number of periods in the phononic bandgap shield, increasing up to $τ\approx 1.5$~seconds. This ultralong lifetime, corresponding to an effective phonon propagation length of several kilometers, is found to be consistent with damping from non-resonant two-level system defects on the surface of the silicon device. Potential applications of these ultra-coherent nanoscale mechanical resonators range from tests of various collapse models of quantum mechanics to miniature quantum memory elements in hybrid superconducting quantum circuits.
△ Less
Submitted 13 January, 2019;
originally announced January 2019.
-
Telecom-band quantum optics with ytterbium atoms and silicon nanophotonics
Authors:
Jacob P. Covey,
Alp Sipahigil,
Szilard Szoke,
Neil Sinclair,
Manuel Endres,
Oskar Painter
Abstract:
Wavelengths in the telecommunication window (~1.25-1.65 microns) are ideal for quantum communication due to low transmission loss in fiber networks. To realize quantum networks operating at these wavelengths, long-lived quantum memories that couple to telecom-band photons with high efficiency need to be developed. We propose coupling neutral ytterbium atoms, which have a strong telecom-wavelength…
▽ More
Wavelengths in the telecommunication window (~1.25-1.65 microns) are ideal for quantum communication due to low transmission loss in fiber networks. To realize quantum networks operating at these wavelengths, long-lived quantum memories that couple to telecom-band photons with high efficiency need to be developed. We propose coupling neutral ytterbium atoms, which have a strong telecom-wavelength transition, to a silicon photonic crystal cavity. Specifically, we consider the 3P0-3D1 transition in neutral 171Yb to interface its long-lived nuclear spin in the metastable 3P0 'clock' state with a telecom-band photon at 1.4 microns. We show that Yb atoms can be trapped using a short wavelength (~470 nm) tweezer at a distance of 350 nm from the silicon photonic crystal cavity. At this distance, due to the slowly decaying evanescent cavity field at a longer wavelength, we obtain a single-photon Rabi frequency of g/(2pi)~100 MHz and a cooperativity of C~47 while maintaining a high photon collection efficiency into a single mode fiber. The combination of high system efficiency, telecom-band operation, and long coherence times makes this platform well suited for quantum optics on a silicon chip and long-distance quantum communication.
△ Less
Submitted 30 October, 2018;
originally announced October 2018.
-
Waveguide-mediated interaction of artificial atoms in the strong coupling regime
Authors:
Mohammad Mirhosseini,
Eunjong Kim,
Xueyue Zhang,
Alp Sipahigil,
Paul B. Dieterle,
Andrew J. Keller,
Ana Asenjo-Garcia,
Darrick E. Chang,
Oskar Painter
Abstract:
Waveguide quantum electrodynamics studies photon-mediated interactions of quantum emitters in a one-dimensional radiation channel. Although signatures of such interactions have been observed previously in a variety of physical systems, observation of coherent cooperative dynamics has been obscured by radiative decay of atoms into the waveguide. Employing transmon qubits as artificial atoms coupled…
▽ More
Waveguide quantum electrodynamics studies photon-mediated interactions of quantum emitters in a one-dimensional radiation channel. Although signatures of such interactions have been observed previously in a variety of physical systems, observation of coherent cooperative dynamics has been obscured by radiative decay of atoms into the waveguide. Employing transmon qubits as artificial atoms coupled to a microwave coplanar waveguide, here we observe dynamical oscillations in an open system where a designated probe qubit interacts with an entangled dark state of an array of qubits which effectively traps radiation as an atomic cavity. The qubit-cavity system is shown to achieve a large cooperativity of $\mathcal{C}=172$ due to collective enhancement of photon-mediated interactions, entering the strong coupling regime. The quantum coherence of the dark state cavity is also explored through its nonlinear response at the single-excitation level. With realistic refinements, this system is suitable for studying the many-body dynamics of large ($N>10$) quantum spin chains, synthesizing highly non-classical radiation fields on demand, and implementing universal quantum logic operations with high fidelity on information encoded within decoherence-free subspaces.
△ Less
Submitted 25 September, 2018;
originally announced September 2018.
-
Quantum electromechanics of a hypersonic crystal
Authors:
Mahmoud Kalaee,
Mohammad Mirhosseini,
Paul B. Dieterle,
Matilda Peruzzo,
Johannes M. Fink,
Oskar Painter
Abstract:
Radiation pressure within engineered structures has recently been used to couple the motion of nanomechanical objects with high sensitivity to optical and microwave electromagnetic fields. Here, we demonstrate a form of electromechanical crystal for coupling microwave photons and hypersonic phonons by embedding the vacuum-gap capacitor of a superconducting resonator within a phononic crystal acous…
▽ More
Radiation pressure within engineered structures has recently been used to couple the motion of nanomechanical objects with high sensitivity to optical and microwave electromagnetic fields. Here, we demonstrate a form of electromechanical crystal for coupling microwave photons and hypersonic phonons by embedding the vacuum-gap capacitor of a superconducting resonator within a phononic crystal acoustic cavity. Utilizing a two-photon resonance condition for efficient microwave pumping and a phononic bandgap shield to eliminate acoustic radiation, we demonstrate large cooperative coupling ($C \approx 30$) between a pair of electrical resonances at $10$GHz and an acoustic resonance at $0.425$GHz. Electrical read-out of the phonon occupancy shows that the hypersonic acoustic mode has an intrinsic energy decay time of $2.3$ms and thermalizes close to its quantum ground-state of motion (occupancy $1.5$) at a fridge temperature of $10$mK. Such an electromechanical transducer is envisioned as part of a hybrid quantum circuit architecture, capable of interfacing to both superconducting qubits and optical photons.
△ Less
Submitted 30 August, 2018; v1 submitted 14 August, 2018;
originally announced August 2018.
-
Subradiant states of quantum bits coupled to a one-dimensional waveguide
Authors:
Andreas Albrecht,
Loïc Henriet,
Ana Asenjo-Garcia,
Paul B. Dieterle,
Oskar Painter,
Darrick E. Chang
Abstract:
The properties of coupled emitters can differ dramatically from those of their individual constituents. Canonical examples include sub- and super-radiance, wherein the decay rate of a collective excitation is reduced or enhanced due to correlated interactions with the environment. Here, we systematically study the properties of collective excitations for regularly spaced arrays of quantum emitters…
▽ More
The properties of coupled emitters can differ dramatically from those of their individual constituents. Canonical examples include sub- and super-radiance, wherein the decay rate of a collective excitation is reduced or enhanced due to correlated interactions with the environment. Here, we systematically study the properties of collective excitations for regularly spaced arrays of quantum emitters coupled to a one-dimensional (1D) waveguide. We find that, for low excitation numbers, the modal properties are well-characterized by spin waves with a definite wavevector. Moreover, the decay rate of the most subradiant modes obeys a universal scaling with a cubic suppression in the number of emitters. Multi-excitation subradiant eigenstates can be built from fermionic combinations of single excitation eigenstates; such "fermionization" results in multiple excitations that spatially repel one another. We put forward a method to efficiently create and measure such subradiant states, which can be realized with superconducting qubits. These measurement protocols probe both real-space correlations (using on-site dispersive readout) and temporal correlations in the emitted field (using photon correlation techniques).
△ Less
Submitted 9 March, 2019; v1 submitted 6 March, 2018;
originally announced March 2018.
-
Superconducting metamaterials for waveguide quantum electrodynamics
Authors:
Mohammad Mirhosseini,
Eunjong Kim,
Vinicius S. Ferreira,
Mahmoud Kalaee,
Alp Sipahigil,
Andrew J. Keller,
Oskar Painter
Abstract:
The embedding of tunable quantum emitters in a photonic bandgap structure enables the control of dissipative and dispersive interactions between emitters and their photonic bath. Operation in the transmission band, outside the gap, allows for studying waveguide quantum electrodynamics in the slow-light regime. Alternatively, tuning the emitter into the bandgap results in finite range emitter-emitt…
▽ More
The embedding of tunable quantum emitters in a photonic bandgap structure enables the control of dissipative and dispersive interactions between emitters and their photonic bath. Operation in the transmission band, outside the gap, allows for studying waveguide quantum electrodynamics in the slow-light regime. Alternatively, tuning the emitter into the bandgap results in finite range emitter-emitter interactions via bound photonic states. Here we couple a transmon qubit to a superconducting metamaterial with a deep sub-wavelength lattice constant ($λ/60$). The metamaterial is formed by periodically loading a transmission line with compact, low loss, low disorder lumped element microwave resonators. We probe the coherent and dissipative dynamics of the system by measuring the Lamb shift and the change in the lifetime of the transmon qubit. Tuning the qubit frequency in the vicinity of a band-edge with a group index of $n_g = 450$, we observe an anomalous Lamb shift of 10 MHz accompanied by a 24-fold enhancement in the qubit lifetime. In addition, we demonstrate selective enhancement and inhibition of spontaneous emission of different transmon transitions, which provide simultaneous access to long-lived metastable qubit states and states strongly coupled to propagating waveguide modes.
△ Less
Submitted 5 February, 2018;
originally announced February 2018.
-
Mechanical On-Chip Microwave Circulator
Authors:
S. Barzanjeh,
M. Wulf,
M. Peruzzo,
M. Kalaee,
P. B. Dieterle,
O. Painter,
J. M. Fink
Abstract:
Nonreciprocal circuit elements form an integral part of modern measurement and communication systems. Mathematically they require breaking of time-reversal symmetry, typically achieved using magnetic materials and more recently using the quantum Hall effect, parametric permittivity modulation or Josephson nonlinearities. Here, we demonstrate an on-chip magnetic-free circulator based on reservoir e…
▽ More
Nonreciprocal circuit elements form an integral part of modern measurement and communication systems. Mathematically they require breaking of time-reversal symmetry, typically achieved using magnetic materials and more recently using the quantum Hall effect, parametric permittivity modulation or Josephson nonlinearities. Here, we demonstrate an on-chip magnetic-free circulator based on reservoir engineered optomechanical interactions. Directional circulation is achieved with controlled phase-sensitive interference of six distinct electro-mechanical signal conversion paths. The presented circulator is compact, its silicon-on-insulator platform is compatible with both superconducting qubits and silicon photonics, and its noise performance is close to the quantum limit. With a high dynamic range, a tunable bandwidth of up to 30 MHz and an in-situ reconfigurability as beam splitter or wavelength converter, it could pave the way for superconducting qubit processors with integrated and multiplexed on-chip signal processing and readout.
△ Less
Submitted 6 June, 2017; v1 submitted 1 June, 2017;
originally announced June 2017.
-
Superconducting qubits on silicon substrates for quantum device integration
Authors:
Andrew J. Keller,
Paul B. Dieterle,
Michael Fang,
Brett Berger,
Johannes M. Fink,
Oskar Painter
Abstract:
We present the fabrication and characterization of transmon qubits formed from aluminum Josephson junctions on two different silicon-based substrates: (i) high-resistivity silicon (Si) and (ii) silicon-on-insulator (SOI). Key to the qubit fabrication process is the use of an anhydrous hydrofluoric vapor process which removes silicon surface oxides without attacking aluminum, and in the case of SOI…
▽ More
We present the fabrication and characterization of transmon qubits formed from aluminum Josephson junctions on two different silicon-based substrates: (i) high-resistivity silicon (Si) and (ii) silicon-on-insulator (SOI). Key to the qubit fabrication process is the use of an anhydrous hydrofluoric vapor process which removes silicon surface oxides without attacking aluminum, and in the case of SOI substrates, selectively removes the lossy buried oxide underneath the qubit region. For qubits with a transition frequency of approximately $5$GHz we find qubit lifetimes and coherence times comparable to those attainable on sapphire substrates ($T_{1,\text{Si}} = 27μ$s, $T_{2,\text{Si}} = 6.6μ$s; $T_{1,\text{SOI}} = 3.5μ$s, $T_{2,\text{SOI}} = 2.2μ$s). This qubit fabrication process in principle permits co-fabrication of silicon photonic and mechanical elements, providing a route towards chip-scale integration of electro-opto-mechanical transducers for quantum networking of superconducting microwave quantum circuits.
△ Less
Submitted 3 April, 2017; v1 submitted 29 March, 2017;
originally announced March 2017.
-
Generalized nonreciprocity in an optomechanical circuit via synthetic magnetism and reservoir engineering
Authors:
Kejie Fang,
Jie Luo,
Anja Metelmann,
Mathew H. Matheny,
Florian Marquardt,
Aashish A. Clerk,
Oskar Painter
Abstract:
Synthetic magnetism has been used to control charge neutral excitations for applications ranging from classical beam steering to quantum simulation. In optomechanics, radiation-pressure-induced parametric coupling between optical (photon) and mechanical (phonon) excitations may be used to break time-reversal symmetry, providing the prerequisite for synthetic magnetism. Here we design and fabricate…
▽ More
Synthetic magnetism has been used to control charge neutral excitations for applications ranging from classical beam steering to quantum simulation. In optomechanics, radiation-pressure-induced parametric coupling between optical (photon) and mechanical (phonon) excitations may be used to break time-reversal symmetry, providing the prerequisite for synthetic magnetism. Here we design and fabricate a silicon optomechanical circuit with both optical and mechanical connectivity between two optomechanical cavities. Driving the two cavities with phase-correlated laser light results in a synthetic magnetic flux, which in combination with dissipative coupling to the mechanical bath, leads to nonreciprocal transport of photons with 35dB of isolation. Additionally, optical pumping with blue-detuned light manifests as a particle non-conserving interaction between photons and phonons, resulting in directional optical amplification of 12dB in the isolator through direction. These results indicate the feasibility of utilizing optomechanical circuits to create a more general class of nonreciprocal optical devices, and further, to enable novel topological phases for both light and sound on a microchip.
△ Less
Submitted 11 August, 2016;
originally announced August 2016.
-
Efficient single sideband microwave to optical conversion using an electro-optical whispering gallery mode resonator
Authors:
Alfredo Rueda,
Florian Sedlmeir,
Michele C. Collodo,
Ulrich Vogl,
Birgit Stiller,
Gerhard Schunk,
Dmitry V. Strekalov,
Christoph Marquardt,
Johannes M. Fink,
Oskar Painter,
Gerd Leuchs,
Harald G. L. Schwefel
Abstract:
Linking classical microwave electrical circuits to the optical telecommunication band is at the core of modern communication. Future quantum information networks will require coherent microwave-to-optical conversion to link electronic quantum processors and memories via low-loss optical telecommunication networks. Efficient conversion can be achieved with electro-optical modulators operating at th…
▽ More
Linking classical microwave electrical circuits to the optical telecommunication band is at the core of modern communication. Future quantum information networks will require coherent microwave-to-optical conversion to link electronic quantum processors and memories via low-loss optical telecommunication networks. Efficient conversion can be achieved with electro-optical modulators operating at the single microwave photon level. In the standard electro-optic modulation scheme this is impossible because both, up- and downconverted, sidebands are necessarily present. Here we demonstrate true single sideband up- or downconversion in a triply resonant whispering gallery mode resonator by explicitly addressing modes with asymmetric free spectral range. Compared to previous experiments, we show a three orders of magnitude improvement of the electro-optical conversion efficiency reaching 0.1% photon number conversion for a 10GHz microwave tone at 0.42mW of optical pump power. The presented scheme is fully compatible with existing superconducting 3D circuit quantum electrodynamics technology and can be used for non-classical state conversion and communication. Our conversion bandwidth is larger than 1MHz and not fundamentally limited.
△ Less
Submitted 26 January, 2016;
originally announced January 2016.
-
Superconducting cavity-electromechanics on silicon-on-insulator
Authors:
Paul B. Dieterle,
Mahmoud Kalaee,
Johannes Fink,
Oskar Painter
Abstract:
Fabrication processes involving anhydrous hydrofluoric vapor etching are developed to create high-$Q$ aluminum superconducting microwave resonators on free-standing silicon membranes formed from a silicon-on-insulator wafer. Using this fabrication process, a high-impedance $8.9$GHz coil resonator is coupled capacitively with large participation ratio to a $9.7$MHz micromechanical resonator. Two-to…
▽ More
Fabrication processes involving anhydrous hydrofluoric vapor etching are developed to create high-$Q$ aluminum superconducting microwave resonators on free-standing silicon membranes formed from a silicon-on-insulator wafer. Using this fabrication process, a high-impedance $8.9$GHz coil resonator is coupled capacitively with large participation ratio to a $9.7$MHz micromechanical resonator. Two-tone microwave spectroscopy and radiation pressure back-action are used to characterize the coupled system in a dilution refrigerator down to temperatures of $T_f = 11$~mK, yielding a measured electromechanical vacuum coupling rate of $g_{0}/2π\approx 24.6$~Hz and a mechanical resonator $Q$-factor of $Q_{m}=1.7\times 10^7$. Microwave back-action cooling of the mechanical resonator is also studied, with a minimum phonon occupancy of $n_{m} \approx 16$ phonons being realized at an elevated fridge temperature of $T_f = 211$~mK.
△ Less
Submitted 15 January, 2016;
originally announced January 2016.
-
Quantum Electromechanics on Silicon Nitride Nanomembranes
Authors:
Johannes M. Fink,
Mahmoud Kalaee,
Alessandro Pitanti,
Richard Norte,
Lukas Heinzle,
Marcelo Davanco,
Kartik Srinivasan,
Oskar Painter
Abstract:
We present a platform based upon silicon nitride nanomembranes for integrating superconducting microwave circuits with planar acoustic and optical devices such as phononic and photonic crystals. Utilizing tensile stress and lithographic patterning of a silicon nitride nanomembrane we are able to reliably realize planar capacitors with vacuum gap sizes down to $s \approx 80$nm. In combination with…
▽ More
We present a platform based upon silicon nitride nanomembranes for integrating superconducting microwave circuits with planar acoustic and optical devices such as phononic and photonic crystals. Utilizing tensile stress and lithographic patterning of a silicon nitride nanomembrane we are able to reliably realize planar capacitors with vacuum gap sizes down to $s \approx 80$nm. In combination with spiral inductor coils of micron pitch, this yields microwave ($\approx 8$GHz) resonant circuits of high impedance ($Z_{0} \approx 3.4$k$Ω$) suitable for efficient electromechanical coupling to nanoscale acoustic structures. We measure an electromechanical vacuum coupling rate of $g_{0}/2π= 41.5$~Hz to the low frequency ($4.48$MHz) global beam motion of a patterned phononic crystal nanobeam, and through parametric microwave driving reach a backaction cooled mechanical mode occupancy as low as $n_{m} = 0.58$.
△ Less
Submitted 16 December, 2015; v1 submitted 15 December, 2015;
originally announced December 2015.
-
Phonon routing in integrated optomechanical cavity-waveguide systems
Authors:
Kejie Fang,
Matthew H. Matheny,
Xingsheng Luan,
Oskar Painter
Abstract:
The mechanical properties of light have found widespread use in the manipulation of gas-phase atoms and ions, helping create new states of matter and realize complex quantum interactions. The field of cavity-optomechanics strives to scale this interaction to much larger, even human-sized mechanical objects. Going beyond the canonical Fabry-Perot cavity with a movable mirror, here we explore a new…
▽ More
The mechanical properties of light have found widespread use in the manipulation of gas-phase atoms and ions, helping create new states of matter and realize complex quantum interactions. The field of cavity-optomechanics strives to scale this interaction to much larger, even human-sized mechanical objects. Going beyond the canonical Fabry-Perot cavity with a movable mirror, here we explore a new paradigm in which multiple cavity-optomechanical elements are wired together to form optomechanical circuits. Using a pair of optomechanical cavities coupled together via a phonon waveguide we demonstrate a tunable delay and filter for microwave-over-optical signal processing. In addition, we realize a tight-binding form of mechanical coupling between distant optomechanical cavities, leading to direct phonon exchange without dissipation in the waveguide. These measurements indicate the feasibility of phonon-routing based information processing in optomechanical crystal circuitry, and further, to the possibility of realizing topological phases of photons and phonons in optomechanical cavity lattices.
△ Less
Submitted 20 August, 2015;
originally announced August 2015.
-
Optical read out and feedback cooling of a nanostring optomechanical cavity
Authors:
Alex G. Krause,
Tim D. Blasius,
Oskar Painter
Abstract:
Optical measurement of the motion of a 940 kHz mechanical resonance of a silicon nitride nanostring resonator is demonstrated with a read out noise imprecision reaching 37 dB below that of the resonator's zero-point fluctuations. Via intensity modulation of the optical probe laser, radiation pressure feedback is used to cool and damp the mechanical mode from an initial room temperature occupancy o…
▽ More
Optical measurement of the motion of a 940 kHz mechanical resonance of a silicon nitride nanostring resonator is demonstrated with a read out noise imprecision reaching 37 dB below that of the resonator's zero-point fluctuations. Via intensity modulation of the optical probe laser, radiation pressure feedback is used to cool and damp the mechanical mode from an initial room temperature occupancy of $\bar{n}_{b} = 6.5 \times 10^6$ ($T_{b}=295$K) down to a phonon occupation of $\langle n \rangle = 66 \pm 10$, representing a mode temperature of $T_{m} \approx 3$mK. The five decades of cooling is enabled by the system's large single-photon cooperativity $(C_{1} = 4)$ and high quantum efficiency of optical motion detection ($η_{t} = 0.27$).
△ Less
Submitted 3 June, 2015;
originally announced June 2015.
-
Position-squared coupling in a tunable photonic crystal optomechanical cavity
Authors:
Taofiq K. Paraiso,
Mahmoud Kalaee,
Leyun Zang,
Hannes Pfeifer,
Florian Marquardt,
Oskar Painter
Abstract:
We present the design, fabrication, and characterization of a planar silicon photonic crystal cavity in which large position-squared optomechanical coupling is realized. The device consists of a double-slotted photonic crystal structure in which motion of a central beam mode couples to two high-Q optical modes localized around each slot. Electrostatic tuning of the structure is used to controllabl…
▽ More
We present the design, fabrication, and characterization of a planar silicon photonic crystal cavity in which large position-squared optomechanical coupling is realized. The device consists of a double-slotted photonic crystal structure in which motion of a central beam mode couples to two high-Q optical modes localized around each slot. Electrostatic tuning of the structure is used to controllably hybridize the optical modes into supermodes which couple in a quadratic fashion to the motion of the beam. From independent measurements of the anti-crossing of the optical modes and of the optical spring effect, the position-squared vacuum coupling rate is measured to be as large as 245 Hz to the fundamental in-plane mechanical resonance of the structure at 8.7MHz, which in displacement units corresponds to a coupling coefficient of 1 THz/nm$^2$. This level of position-squared coupling is approximately five orders of magnitude larger than in conventional Fabry-Perot cavity systems.
△ Less
Submitted 27 May, 2015;
originally announced May 2015.
-
Pulsed excitation dynamics of an optomechanical crystal resonator near its quantum ground-state of motion
Authors:
Sean M. Meenehan,
Justin D. Cohen,
Gregory S. MacCabe,
Francesco Marsili,
Matthew D. Shaw,
Oskar Painter
Abstract:
Using pulsed optical excitation and read-out along with single phonon counting techniques, we measure the transient back-action, heating, and damping dynamics of a nanoscale silicon optomechanical crystal cavity mounted in a dilution refrigerator at a base temperature of 11mK. In addition to observing a slow (~740ns) turn-on time for the optical-absorption-induced hot phonon bath, we measure for t…
▽ More
Using pulsed optical excitation and read-out along with single phonon counting techniques, we measure the transient back-action, heating, and damping dynamics of a nanoscale silicon optomechanical crystal cavity mounted in a dilution refrigerator at a base temperature of 11mK. In addition to observing a slow (~740ns) turn-on time for the optical-absorption-induced hot phonon bath, we measure for the 5.6GHz `breathing' acoustic mode of the cavity an initial phonon occupancy as low as 0.021 +- 0.007 (mode temperature = 70mK) and an intrinsic mechanical decay rate of 328 +- 14 Hz (mechanical Q-factor = 1.7x10^7). These measurements demonstrate the feasibility of using short pulsed measurements for a variety of quantum optomechanical applications despite the presence of steady-state optical heating.
△ Less
Submitted 17 March, 2015;
originally announced March 2015.
-
Superradiance for atoms trapped along a photonic crystal waveguide
Authors:
A. Goban,
C. -L. Hung,
J. D. Hood,
S. -P. Yu,
J. A. Muniz,
O. Painter,
H. J. Kimble
Abstract:
We report observations of superradiance for atoms trapped in the near field of a photonic crystal waveguide (PCW). By fabricating the PCW with a band edge near the D$_1$ transition of atomic cesium, strong interaction is achieved between trapped atoms and guided-mode photons. Following short-pulse excitation, we record the decay of guided-mode emission and find a superradiant emission rate scaling…
▽ More
We report observations of superradiance for atoms trapped in the near field of a photonic crystal waveguide (PCW). By fabricating the PCW with a band edge near the D$_1$ transition of atomic cesium, strong interaction is achieved between trapped atoms and guided-mode photons. Following short-pulse excitation, we record the decay of guided-mode emission and find a superradiant emission rate scaling as $\barΓ_{\rm SR}\propto\bar{N}\cdotΓ_{\rm 1D}$ for average atom number $0.19 \lesssim \bar{N} \lesssim 2.6$ atoms, where $Γ_{\rm 1D}/Γ_0 =1.1\pm0.1$ is the peak single-atom radiative decay rate into the PCW guided mode and $Γ_{0}$ is the Einstein-$A$ coefficient for free space. These advances provide new tools for investigations of photon-mediated atom-atom interactions in the many-body regime.
△ Less
Submitted 15 March, 2015;
originally announced March 2015.
-
Optomechanical creation of magnetic fields for photons on a lattice
Authors:
M. Schmidt,
S. Keßler,
V. Peano,
O. Painter,
F. Marquardt
Abstract:
We propose using the optomechanical interaction to create artificial magnetic fields for photons on a lattice. The ingredients required are an optomechanical crystal, i.e. a piece of dielectric with the right pattern of holes, and two laser beams with the right pattern of phases. One of the two proposed schemes is based on optomechanical modulation of the links between optical modes, while the oth…
▽ More
We propose using the optomechanical interaction to create artificial magnetic fields for photons on a lattice. The ingredients required are an optomechanical crystal, i.e. a piece of dielectric with the right pattern of holes, and two laser beams with the right pattern of phases. One of the two proposed schemes is based on optomechanical modulation of the links between optical modes, while the other is an lattice extension of optomechanical wavelength-conversion setups. We illustrate the resulting optical spectrum, photon transport in the presence of an artificial Lorentz force, edge states, and the photonic Aharonov-Bohm effect. Moreover, wWe also briefly describe the gauge fields acting on the synthetic dimension related to the phonon/photon degree of freedom. These can be generated using a single laser beam impinging on an optomechanical array.
△ Less
Submitted 26 February, 2015;
originally announced February 2015.
-
Phonon counting and intensity interferometry of a nanomechanical resonator
Authors:
Justin D. Cohen,
Sean M. Meenehan,
Gregory S. MacCabe,
Simon Groblacher,
Amir H. Safavi-Naeini,
Francesco Marsili,
Matthew D. Shaw,
Oskar Painter
Abstract:
Using an optical probe along with single photon detection we have performed effective phonon counting measurements of the acoustic emission and absorption processes in a nanomechanical resonator. Applying these measurements in a Hanbury Brown and Twiss set-up, phonon correlations of the nanomechanical resonator are explored from below to above threshold of a parametric instability leading to self-…
▽ More
Using an optical probe along with single photon detection we have performed effective phonon counting measurements of the acoustic emission and absorption processes in a nanomechanical resonator. Applying these measurements in a Hanbury Brown and Twiss set-up, phonon correlations of the nanomechanical resonator are explored from below to above threshold of a parametric instability leading to self-oscillation of the resonator. Discussion of the results in terms of a "phonon laser", and analysis of the sensitivity of the phonon counting technique are presented.
△ Less
Submitted 4 October, 2014;
originally announced October 2014.
-
Thermalization properties at mK temperatures of a nanoscale optomechanical resonator with acoustic-bandgap shield
Authors:
Sean M. Meenehan,
Justin D. Cohen,
Simon Groeblacher,
Jeff T. Hill,
Amir H. Safavi-Naeini,
Markus Aspelmeyer,
Oskar Painter
Abstract:
Optical measurements of a nanoscale silicon optomechanical crystal cavity with a mechanical resonance frequency of 3.6GHz are performed at sub-kelvin temperatures. We infer optical-absorption-induced heating and damping of the mechanical resonator from measurements of phonon occupancy and motional sideband asymmetry. At the lowest probe power and lowest fridge temperature (10mK), the localized mec…
▽ More
Optical measurements of a nanoscale silicon optomechanical crystal cavity with a mechanical resonance frequency of 3.6GHz are performed at sub-kelvin temperatures. We infer optical-absorption-induced heating and damping of the mechanical resonator from measurements of phonon occupancy and motional sideband asymmetry. At the lowest probe power and lowest fridge temperature (10mK), the localized mechanical resonance is found to couple at a rate of 400Hz (Q=9x10^6) to a thermal bath of temperature 270mK. These measurements indicate that silicon optomechanical crystals cooled to millikelvin temperatures should be suitable for a variety of experiments involving coherent coupling between photons and phonons at the single quanta level.
△ Less
Submitted 14 March, 2014;
originally announced March 2014.
-
Nanowire photonic crystal waveguides for single-atom trapping and strong light-matter interactions
Authors:
S. -P. Yu,
J. D. Hood,
J. A. Muniz,
M. J. Martin,
Richard Norte,
C. -L. Hung,
Seán M. Meenehan,
Justin D. Cohen,
Oskar Painter,
H. J. Kimble
Abstract:
We present a comprehensive study of dispersion-engineered nanowire photonic crystal waveguides suitable for experiments in quantum optics and atomic physics with optically trapped atoms. Detailed design methodology and specifications are provided, as are the processing steps used to create silicon nitride waveguides of low optical loss in the near-IR. Measurements of the waveguide optical properti…
▽ More
We present a comprehensive study of dispersion-engineered nanowire photonic crystal waveguides suitable for experiments in quantum optics and atomic physics with optically trapped atoms. Detailed design methodology and specifications are provided, as are the processing steps used to create silicon nitride waveguides of low optical loss in the near-IR. Measurements of the waveguide optical properties and power-handling capability are also presented.
△ Less
Submitted 5 February, 2014;
originally announced February 2014.
-
Atom-Light Interactions in Photonic Crystals
Authors:
A. Goban,
C. -L. Hung,
S. -P. Yu,
J. D. Hood,
J. A. Muniz,
J. H. Lee,
M. J. Martin,
A. C. McClung,
K. S. Choi,
D. E. Chang,
O. Painter,
H. J. Kimble
Abstract:
The integration of nanophotonics and atomic physics has been a long-sought goal that would open new frontiers for optical physics. Here, we report the development of the first integrated optical circuit with a photonic crystal capable of both localizing and interfacing atoms with guided photons in the device. By aligning the optical bands of a photonic crystal waveguide (PCW) with selected atomic…
▽ More
The integration of nanophotonics and atomic physics has been a long-sought goal that would open new frontiers for optical physics. Here, we report the development of the first integrated optical circuit with a photonic crystal capable of both localizing and interfacing atoms with guided photons in the device. By aligning the optical bands of a photonic crystal waveguide (PCW) with selected atomic transitions, our platform provides new opportunities for novel quantum transport and many-body phenomena by way of photon-mediated atomic interactions along the PCW. From reflection spectra measured with average atom number N = 1.1$\pm$0.4, we infer that atoms are localized within the PCW by Casimir-Polder and optical dipole forces. The fraction of single-atom radiative decay into the PCW is $Γ_{\rm 1D}/Γ'$ = 0.32$\pm$0.08, where $Γ_{1D}$ is the rate of emission into the guided mode and $Γ'$ is the decay rate into all other channels. $Γ_{\rm 1D}/Γ'$ is quoted without enhancement due to an external cavity and is unprecedented in all current atom-photon interfaces.
△ Less
Submitted 12 December, 2013;
originally announced December 2013.
-
Highly efficient coupling from an optical fiber to a nanoscale silicon optomechanical cavity
Authors:
Simon Groeblacher,
Jeff T. Hill,
Amir H. Safavi-Naeini,
Jasper Chan,
Oskar Painter
Abstract:
We demonstrate highly efficient coupling of light from an optical fiber to a silicon photonic crystal optomechanical cavity. The fiber-to-cavity coupling utilizes a compact (L ~ 25 um) intermediate adiabatic coupler. The optical coupling is lithographically controlled, broadband, relatively insensitive to fiber misalignment, and allows for light to be transferred from an optical fiber to, in princ…
▽ More
We demonstrate highly efficient coupling of light from an optical fiber to a silicon photonic crystal optomechanical cavity. The fiber-to-cavity coupling utilizes a compact (L ~ 25 um) intermediate adiabatic coupler. The optical coupling is lithographically controlled, broadband, relatively insensitive to fiber misalignment, and allows for light to be transferred from an optical fiber to, in principle, any photonic chip with refractive index greater than that of the optical fiber. Here we demonstrate single-sided cavity coupling with a total fiber-to-cavity optical power coupling efficiency of 85%.
△ Less
Submitted 30 October, 2013; v1 submitted 4 September, 2013;
originally announced September 2013.
-
Comment on "A classical model for asymmetric sidebands in cavity optomechanical measurements"
Authors:
Amir H. Safavi-Naeini,
Oskar Painter
Abstract:
We respond to a recent manuscript by Tsang [arXiv:1306.2699], on whether the measurement presented in Safavi-Naeini et al. [Phys. Rev. Lett. 108, 033602 (2012)] can be explained "without reference to quantum mechanics". We show that the fully classical analysis provided by Tsang, and previously by Safavi-Naeini et al. [New J. Phys. 15, 035007 (2013)], has been ruled out by our published data. In a…
▽ More
We respond to a recent manuscript by Tsang [arXiv:1306.2699], on whether the measurement presented in Safavi-Naeini et al. [Phys. Rev. Lett. 108, 033602 (2012)] can be explained "without reference to quantum mechanics". We show that the fully classical analysis provided by Tsang, and previously by Safavi-Naeini et al. [New J. Phys. 15, 035007 (2013)], has been ruled out by our published data. In addition, we discuss the role of the mathematical formulation used on the interpretation of the asymmetry effect, as has previously been considered by Khalili et al. [Phys. Rev. A 86, 033840 (2012)].
△ Less
Submitted 22 June, 2013;
originally announced June 2013.
-
Squeezing of light via reflection from a silicon micromechanical resonator
Authors:
Amir H. Safavi-Naeini,
Simon Groeblacher,
Jeff T. Hill,
Jasper Chan,
Markus Aspelmeyer,
Oskar Painter
Abstract:
We present the measurement of squeezed light generation using an engineered optomechanical system fabricated from a silicon microchip and composed of a micromechanical resonator coupled to a nanophotonic cavity. Laser light is used to measure the fluctuations in the position of the mechanical resonator at a measurement rate comparable to the free dynamics of the mechanical resonator, and greater t…
▽ More
We present the measurement of squeezed light generation using an engineered optomechanical system fabricated from a silicon microchip and composed of a micromechanical resonator coupled to a nanophotonic cavity. Laser light is used to measure the fluctuations in the position of the mechanical resonator at a measurement rate comparable to the free dynamics of the mechanical resonator, and greater than its thermal decoherence rate. By approaching the strong continuous measurement regime we observe, through homodyne detection, non-trivial modifications of the reflected light's vacuum fluctuation spectrum. In spite of the mechanical resonator's highly excited thermal state ($10,000$ phonons), we observe squeezing at the level of $4.5 \pm 0.5%$ below that of shot-noise over a few MHz bandwidth around the mechanical resonance frequency of 28 MHz. This squeezing is interpreted as an unambiguous quantum signature of radiation pressure shot-noise.
△ Less
Submitted 13 March, 2013; v1 submitted 25 February, 2013;
originally announced February 2013.
-
Optical coupling to nanoscale optomechanical cavities for near quantum-limited motion transduction
Authors:
Justin D. Cohen,
Sean Meenehan,
Oskar Painter
Abstract:
A significant challenge in the development of chip-scale cavity-optomechanical devices as testbeds for quantum experiments and classical metrology lies in the coupling of light from nanoscale optical mode volumes to conventional optical components such as lenses and fibers. In this work we demonstrate a high-efficiency, single-sided fiber-optic coupling platform for optomechanical cavities. By uti…
▽ More
A significant challenge in the development of chip-scale cavity-optomechanical devices as testbeds for quantum experiments and classical metrology lies in the coupling of light from nanoscale optical mode volumes to conventional optical components such as lenses and fibers. In this work we demonstrate a high-efficiency, single-sided fiber-optic coupling platform for optomechanical cavities. By utilizing an adiabatic waveguide taper to transform a single optical mode between a photonic crystal zipper cavity and a permanently mounted fiber, we achieve a collection efficiency for intracavity photons of 52% at the cavity resonance wavelength of 1538nm. An optical balanced homodyne measurement of the displacement fluctuations of the fundamental in-plane mechanical resonance at 3.3 MHz reveals that the imprecision noise floor lies a factor of 2.8 above the standard quantum limit (SQL) for continuous position measurement, with a predicted total added noise of 1.4 phonons at the optimal probe power. The combination of extremely low measurement noise and robust fiber alignment presents significant progress towards single-phonon sensitivity for these sorts of integrated micro-optomechanical cavities.
△ Less
Submitted 7 February, 2013;
originally announced February 2013.
-
Trapped Atoms in One-Dimensional Photonic Crystals
Authors:
C. -L. Hung,
S. M. Meenehan,
D. E. Chang,
O. Painter,
H. J. Kimble
Abstract:
We describe one-dimensional photonic crystals that support a guided mode suitable for atom trapping within a unit cell, as well as a second probe mode with strong atom-photon interactions. A new hybrid trap is analyzed that combines optical and Casimir-Polder forces to form stable traps for neutral atoms in dielectric nanostructures. By suitable design of the band structure, the atomic spontaneous…
▽ More
We describe one-dimensional photonic crystals that support a guided mode suitable for atom trapping within a unit cell, as well as a second probe mode with strong atom-photon interactions. A new hybrid trap is analyzed that combines optical and Casimir-Polder forces to form stable traps for neutral atoms in dielectric nanostructures. By suitable design of the band structure, the atomic spontaneous emission rate into the probe mode can exceed the rate into all other modes by more than tenfold. The unprecedented single-atom reflectivity $r_0 \gtrsim 0.9$ for the guided probe field should enable diverse investigations of photon-mediated interactions for 1D atom chains and cavity QED.
△ Less
Submitted 22 January, 2013;
originally announced January 2013.
-
A silicon-chip source of bright photon-pair comb
Authors:
Wei C. Jiang,
Xiyuan Lu,
Jidong Zhang,
Oskar Painter,
Qiang Lin
Abstract:
Integrated quantum photonics relies critically on the purity, scalability, integrability, and flexibility of a photon source to support diverse quantum functionalities on a single chip. Up to date, it remains an open challenge to realize an efficient monolithic photon-pair source for on-chip application. Here we report a device on the silicon-on-insulator platform that utilizes dramatic cavity enh…
▽ More
Integrated quantum photonics relies critically on the purity, scalability, integrability, and flexibility of a photon source to support diverse quantum functionalities on a single chip. Up to date, it remains an open challenge to realize an efficient monolithic photon-pair source for on-chip application. Here we report a device on the silicon-on-insulator platform that utilizes dramatic cavity enhanced four-wave mixing in a high-Q silicon microdisk resonator. The device is able to produce high-purity photon pairs in a comb fashion, with an unprecedented spectral brightness of $6.24 \times 10^7 {\rm pair/s/mW^2/GHz}$ and photon-pair correlation with a coincidence-to-accidental ratio of $1386 \pm 278$ while pumped with a continuous-wave laser. The superior performance, together with the structural compactness and CMOS compatibility, opens up a great avenue towards quantum silicon photonics with unprecedented capability of multi-channel parallel information processing for both integrated quantum computing and long-haul quantum communication.
△ Less
Submitted 16 October, 2012;
originally announced October 2012.
-
Laser noise in cavity-optomechanical cooling and thermometry
Authors:
Amir H. Safavi-Naeini,
Jasper Chan,
Jeff T. Hill,
Simon Groeblacher,
Haixing Miao,
Yanbei Chen,
Markus Aspelmeyer,
Oskar Painter
Abstract:
We review and study the roles of quantum and classical fluctuations in recent cavity-optomechanical experiments which have now reached the quantum regime (mechanical phonon occupancy < 1) using resolved sideband laser cooling. In particular, both the laser noise heating of the mechanical resonator and the form of the optically transduced mechanical spectra, modified by quantum and classical laser…
▽ More
We review and study the roles of quantum and classical fluctuations in recent cavity-optomechanical experiments which have now reached the quantum regime (mechanical phonon occupancy < 1) using resolved sideband laser cooling. In particular, both the laser noise heating of the mechanical resonator and the form of the optically transduced mechanical spectra, modified by quantum and classical laser noise squashing, are derived under various measurement conditions. Using this theory, we analyze our recent ground-state laser cooling and motional sideband asymmetry experiments with nanoscale optomechanical crystal resonators.
△ Less
Submitted 9 October, 2012;
originally announced October 2012.
-
Optimized optomechanical crystal cavity with acoustic radiation shield
Authors:
Jasper Chan,
Amir H. Safavi-Naeini,
Jeff T. Hill,
Sean Meenehan,
Oskar Painter
Abstract:
We present the design of an optomechanical crystal nanobeam cavity that combines finite-element simulation with numerical optimization, and considers the optomechanical coupling arising from both moving dielectric boundaries and the photo-elastic effect. Applying this methodology results in a nanobeam with an experimentally realized intrinsic optical Q-factor of 1.2x10^6, a mechanical frequency of…
▽ More
We present the design of an optomechanical crystal nanobeam cavity that combines finite-element simulation with numerical optimization, and considers the optomechanical coupling arising from both moving dielectric boundaries and the photo-elastic effect. Applying this methodology results in a nanobeam with an experimentally realized intrinsic optical Q-factor of 1.2x10^6, a mechanical frequency of 5.1GHz, a mechanical Q-factor of 6.8x10^5 (at T=10K), and a zero-point-motion optomechanical coupling rate of g=1.1MHz.
△ Less
Submitted 11 June, 2012;
originally announced June 2012.
-
Quantum back-action in measurements of zero-point mechanical oscillations
Authors:
Farid Ya. Khalili,
Haixing Miao,
Huan Yang,
Amir H. Safavi-Naeini,
Oskar Painter,
Yanbei Chen
Abstract:
Measurement-induced back action, a direct consequence of the Heisenberg Uncertainty Principle, is the defining feature of quantum measurements. We use quantum measurement theory to analyze the recent experiment of Safavi-Naeini et al. [Phys. Rev. Lett. {\bf 108}, 033602 (2012)], and show that results of this experiment not only characterize the zero-point fluctuation of a near-ground-state nanomec…
▽ More
Measurement-induced back action, a direct consequence of the Heisenberg Uncertainty Principle, is the defining feature of quantum measurements. We use quantum measurement theory to analyze the recent experiment of Safavi-Naeini et al. [Phys. Rev. Lett. {\bf 108}, 033602 (2012)], and show that results of this experiment not only characterize the zero-point fluctuation of a near-ground-state nanomechanical oscillator, but also demonstrate the existence of quantum back-action noise --- through correlations that exist between sensing noise and back-action noise. These correlations arise from the quantum coherence between the mechanical oscillator and the measuring device, which build up during the measurement process, and are key to improving sensitivities beyond the Standard Quantum Limit.
△ Less
Submitted 4 June, 2012;
originally announced June 2012.
-
Coherent optical wavelength conversion via cavity-optomechanics
Authors:
Jeff T. Hill,
Amir H. Safavi-Naeini,
Jasper Chan,
Oskar Painter
Abstract:
We theoretically propose and experimentally demonstrate coherent wavelength conversion of optical photons using photon-phonon translation in a cavity-optomechanical system. For an engineered silicon optomechanical crystal nanocavity supporting a 4 GHz localized phonon mode, optical signals in a 1.5 MHz bandwidth are coherently converted over a 11.2 THz frequency span between one cavity mode at wav…
▽ More
We theoretically propose and experimentally demonstrate coherent wavelength conversion of optical photons using photon-phonon translation in a cavity-optomechanical system. For an engineered silicon optomechanical crystal nanocavity supporting a 4 GHz localized phonon mode, optical signals in a 1.5 MHz bandwidth are coherently converted over a 11.2 THz frequency span between one cavity mode at wavelength 1460 nm and a second cavity mode at 1545 nm with a 93% internal (2% external) peak efficiency. The thermal and quantum limiting noise involved in the conversion process is also analyzed, and in terms of an equivalent photon number signal level are found to correspond to an internal noise level of only 6 and 4x10-3 quanta, respectively.
△ Less
Submitted 4 June, 2012;
originally announced June 2012.
-
A chip-scale integrated cavity-electro-optomechanics platform
Authors:
Martin Winger,
Tim Blasius,
Thiago P. Mayer Alegre,
Amir H. Safavi-Naeini,
Seán Meenehan,
Justin Cohen,
Søren Stobbe,
Oskar Painter
Abstract:
We present an integrated optomechanical and electromechanical nanocavity, in which a common mechanical degree of freedom is coupled to an ultrahigh-Q photonic crystal defect cavity and an electrical circuit. The sys- tem allows for wide-range, fast electrical tuning of the optical nanocavity resonances, and for electrical control of optical radiation pressure back-action effects such as mechanical…
▽ More
We present an integrated optomechanical and electromechanical nanocavity, in which a common mechanical degree of freedom is coupled to an ultrahigh-Q photonic crystal defect cavity and an electrical circuit. The sys- tem allows for wide-range, fast electrical tuning of the optical nanocavity resonances, and for electrical control of optical radiation pressure back-action effects such as mechanical amplification (phonon lasing), cooling, and stiffening. These sort of integrated devices offer a new means to efficiently interconvert weak microwave and optical signals, and are expected to pave the way for a new class of micro-sensors utilizing optomechanical back-action for thermal noise reduction and low-noise optical read-out.
△ Less
Submitted 19 November, 2011;
originally announced November 2011.
-
Measurement of the quantum zero-point motion of a nanomechanical resonator
Authors:
Amir H. Safavi-Naeini,
Jasper Chan,
Jeff T. Hill,
T. P. Mayer Alegre,
Alex Krause,
Oskar Painter
Abstract:
We present optical sideband spectroscopy measurements of a mesoscopic mechanical oscillator cooled near its quantum ground state. The mechanical oscillator, corresponding to a 3.99GHz acoustic mode of a patterned silicon nanobeam, is coupled via radiation pressure to a pair of co-localized 200THz optical modes. The mechanical mode is cooled close to its quantum ground state from a bath temperature…
▽ More
We present optical sideband spectroscopy measurements of a mesoscopic mechanical oscillator cooled near its quantum ground state. The mechanical oscillator, corresponding to a 3.99GHz acoustic mode of a patterned silicon nanobeam, is coupled via radiation pressure to a pair of co-localized 200THz optical modes. The mechanical mode is cooled close to its quantum ground state from a bath temperature of 18K using radiation pressure back-action stemming from the optical pumping of one of the optical cavity resonances. An optical probe beam, resonant with the second optical cavity resonance, is used to transduce the mechanical motion and determine the phonon occupancy of the mechanical mode. Measurement of the asymmetry between up-converted and down-converted photons of the probe beam yields directly the displacement noise power associated with the quantum zero-point motion of the mechanical oscillator, and provides an absolute calibration of the average phonon occupancy of the mechanical mode.
△ Less
Submitted 23 August, 2011;
originally announced August 2011.