Research on CNC simulation system with instruction interpretations possessed of wireless communication
Authors: 
Fang Song, Su Yu, Tao Chen, Li-Ning SunAuthors Info & Claims
Fang Song, Su Yu, Tao Chen, Li-Ning SunAuthors Info & ClaimsPages 2703 - 2719
Abstract
This paper proposes a novel fourth-order S-shape acc/dec control algorithm by use of the parameter restriction that applied in CNC simulation system possessed of wireless communication. Firstly, the acc/dec control strategy of equivalent trapezoid is studied. Then, the real kinematics parameters of fourth-order S-shape curve are analyzed under the condition of speed---acceleration constraint, displacement---acceleration and displacement---speed based on the proposed control strategy. Based on the system dynamics constraints and considering the seven control stages of the algorithm, the forth-order S-shape curve acc/dec control algorithm with time optimization is proposed through pre-processing. The effectiveness and reliability of the algorithm are verified through a calculation instance. Finally, the proposed algorithm is successfully realized on the newly developed CNC simulation system with instruction interpretation possessed of wireless communication. The research results will provide the theoretical basis for the simulation system and further promote the development of the virtual manufacturing system.
References
[1]
Obaidat MS, Dhurandher SK, Gupta D et al (2010) Dynamic energy efficient and secure routing protocol for wireless sensor networks in urban environments. J Inform Process Syst 6(3):269---294
[2]
Qiao ZF, Wang HH, Liu ZZ, Wang TY et al (2015) Nanoscale trajectory planning with flexible acc/dec and look-ahead method. Int J Adv Manuf Technol 79(5---8):1377---1387
[3]
Rajagopal B, Rajasekaran L (2015) Performance analysis of e-shaped dual band antenna for wireless hand-held devices. Human-Centric Comp Inform Sci 5---6:1---13
[4]
Zhou L, Yuan JL, Gao P, Ren YH (2014) A new architecture of open CNC system based on compiling mode. Int J Adv Manuf Technol 73(9---12):1597---1603
[5]
Lin HB (2011) Design of special welding machine based on open CNC system. Comm Syst Inform Technol 100:839---844
[6]
Sinha A, Lobiyal DK (2013) Performance evaluation of data aggregation for cluster-based wireless sensor network. Human-Cent Comp Inform Sci 3:1---17
[7]
Wang W, Jiang Z, Li QC et al (2015) A new test part to identify performance of five-axis machine toll-part II validation of S part. Int J Adv Manuf Technol 79(5---8):739---756
[8]
Hwang K, Narn SW (2014) Near real-time M2M communication for bidirectional AMR systems. J Conv 5(2):1---7
[9]
Cheng B, Zhao S, Tang HN (2015) Wirless machine to machine monitoring using cross-platform smart phone for district heating. Wireless Pers Comm 83(2):1229---1250
[10]
Wang JT, Zhang DH, Wu BH et al (2015) Kinematic analysis and feedrate optimization in six-axis NC abrasive belt grinding of blades. Int J Adv Manuf Technol 79(1---4):405---414
[11]
Fleisig RV, Spence AD (2001) A constant feed and reduced angular acceleration interpolation algorithm for multi-axis machining. Comp-Aided Design 33:1---15
[12]
Liu KZ, Peng FY, Wu H et al (2004) An interpolator for NURBS curve machining based on dynamical characteristic of machine. Mach Tool Hydraulics 11:26---31
[13]
Biagiotti LG, Melchiorri CD (2012) FIR filters for online trajectory planning with time- and frequency-domain specifications. Control Eng Pract 20:1385---1399
[14]
Motion Lewin C (1994) Better control gets gradually. Mach Design 66:90---94
[15]
Jincheng Chen, Zhiming Xu, Zhengfei Xu et al (2002) Research on adaptive algorithm for generation smooth motion profile of high-speed machining based on piecewise 3-order spline curve. Chin J Mech Eng 38(5):61---65
[16]
Meng TS, Hao NW, Hong YT (2008) Development of an integrated look-ahead dynamics-based NURBS interpolator for high precision machinery. Comp-Aided Design 40:554---556
[17]
Hu MH, Shi XQ, Wang TJ et al (2008) A note on cubic polynomial interpolation. Comp Math Appl 56:1358---1363
[18]
Dong Yu, Shaohua Hu, Rongli Gai et al (2008) Research on acceleration and deceleration for CNC machine tools based on filtering. China Mech Eng 19(7):804---807
[19]
Haihua Mu, Yunfei Zhou, Sijie Yan et al (2007) Research on Fourth-order profile planning algorithm for high accuracy point-to-point motion system. China Mech Eng 18(19):2346---2354
[20]
Zhipeng Wu, Xinglin Chen (2012) Fifth-order S-curve trajectory planning for step and scan operation of precision wafer stage. Opto-Elect Eng 39(8):99---103
[21]
Biafiotti Luigi, Melchiorri Claudio (2012) FIR filters for online trajectory planning with time-and frequency-domain specifications. Control Eng Pract 20:1385---1399
[22]
Zheng KJ, Cheng L (2008) Adaptive S-curve Acceleration/deceleration Control Method. In: Proceeding of the 7th World Congress on Intelligent Control and Automation. Chongqing, China, pp 2752---2765
[23]
Shi XG, Xu BG, Xie W et al (2008) Design and Implementation for Jerk Limited Trajectory Plan with Real-time Look-ahead Interpolator. In: Proceeding of the 27th Chinese Control Conference. Kunming, Yunnan, China, pp 135---139
[24]
Erkorkmaz K, Altintas Y (2001) High Speed CNC System Design. Part I: Jerk Limited Trajectory Generation and Quintic Spline Interpolation. Int J Mach Tools Manuf 41:1323---1345
[25]
Shuanghui Hao, Fang Song, Minghui Hao et al (2008) Research on S-shape acceleration and deceleration control algorithm based on parameter restriction. Manuf Technol Mach Tool 7:84---86
Recommendations
Research on Intelligent Vehicle Platoon Driving Experiment System Based on Wireless Communication
APCIP '09: Proceedings of the 2009 Asia-Pacific Conference on Information Processing - Volume 02Intelligent vehicle platoon driving is a process of the flexible formation based on the coordination between vehicle and infrastructure in the intelligent vehicle-infrastructure system, which can increase the density of road traffic, simplify the ...
Research on Adaptive NURBS Interpolation Algorithm for 3D Engraving of Manipulators
CCRIS '20: Proceedings of the 2020 1st International Conference on Control, Robotics and Intelligent SystemIn the process of engraving three-dimensional (3D) complex shape using manipulators, there are many inflection points and many start-stop operation, which cause shock easily. To resolve these problems, an adaptive NURBS curve interpolation algorithm ...
Wireless Communication Technologies for Vehicular Nodes: A Survey
In many countries, road accidents are a leading cause of death as well as being financially draining to the authorities concerned. This problem can be alleviated by having a mechanism to enable exchange of safety related messages to road users in a ...
Comments
Information & Contributors
Information
Published In
Copyright © Copyright © 2016 Springer Science+Business Media New York.
Publisher
Kluwer Academic Publishers
United States
Publication History
Published: 01 July 2016
Author Tags
Qualifiers
- Article
Contributors
Other Metrics
Bibliometrics & Citations
Bibliometrics
Article Metrics
- 0Total Citations
- 0Total Downloads
- Downloads (Last 12 months)0
- Downloads (Last 6 weeks)0
Reflects downloads up to 10 Nov 2024
Other Metrics
Citations
View Options
View options
Get Access
Login options
Check if you have access through your login credentials or your institution to get full access on this article.
Sign in