Browse Books

It is the fifth unique full color book on the most powerful CAD/CAE-system Marc (of the last version) of MSC Software Corporation (USA). Is developed the Zharkovs methodology of 3D-modeling the technological processes of stamping the details from the sheet blanks on examples of widespread operations in the industry: formability testing of sheet materials taking into account the hardening, anisotropy and springback of specimens and blanks at testing. The modeling is based on designing of calculated model only on the basis of own powerful graphic CAD-possibilities of system Marc without usage of any additional input files and without a writing of programs. For the purpose of understanding the mechanism of testing the specimens and blanks, for the correct development of the project in CAD/CAE-system and the correct analysis of results of modeling the testing in this system, in the beginning of the main chapters is resulted the engineering theory of stamping and testing by V. A. Zharkov with analytical dependences and Zharkov's laws and regularities in a large quantity of formulas. And only then is given the exact numerical modeling in CAD/CAE-system. In the sections and chapters are given: Section I. Zharkovs theory of formability testing of sheet materials taking into account the hardening and anisotropy of specimens and blanks Section II. Zharkovs theory and CAE-modeling of testing on uniaxial tension of narrow specimens with notches and holes Section III. Zharkovs theory and CAE-modeling of testing on uniaxial tension of wide specimens and blanks Section IV. Zharkovs theory and CAE-modeling of testing on bending Section V. Zharkovs theory and CAE-modeling of testing on stretching of sheets, strips and profiles on a punch Section VI. Zharkovs theory and CAE-modeling of testing on stretch forming Section VII. Zharkovs theory and CAE-modeling of testing on drawing or flanging the axisymmetric and box-shaped details for 1 operation without a holder of blank Section VIII. Zharkovs theory and CAE-modeling of testing on axisymmetric one-operating and multi-operational drawing with a holder of sheet blanks Section IX. Zharkovs theory and CAE-modeling of testing on not axisymmetric one-operating and multi-operational drawing with a holder of sheet blanks In the end of the book are resulted: Conclusion, References, Schematic symbols. Now to the readers, who are engaged in the sheet stamping (forming) of details in the industry, it can not be demanded to study the difficult theoretical books and to buy the many separate books. The author made it for them. It will be necessary for reader to open only the given book in its interesting chapter and by analogy to circumstantial instructions of chapter (by a principle: do, as I), independently develop the educational, scientific or practical project. Creating the project on the Zharkovs methods of book, the reader can work alone for the designer, the technologist, the mathematician and the programmer simultaneously and to spare the weeks and months of persistent work. Following the circumstantial step-by-step instructions in the book, any user, even without special preparation, can quickly create the own project in CAD/CAE-system, and further the user can model, study, research and put into practice the processing of blank, to reduce the design time of processing and the cost price of manufacture of stamped details in automobile, aircraft, electrotechnical, crockery, packing and other industries. The book is intended for engineers and scientists, working in various industries, and also for students and teachers of technical institutes and universities. Dr. Zharkov will answer on questions on subjects of this book to the email, which has been written down in this book.