Abstract
In this paper, a lower extremity exoskeleton is developed to help human beings walk and carry heavy loads. The exoskeleton is actuated by a pump-based hydraulic actuation system. The hydraulic actuation system has a high speed on/off valve and a unidirectional cylinder with embedded springs on the cylinder rod. The hybrid control scheme, including two modes, i.e., position control and following control, is proposed to drive the exoskeleton system. The position control mode is employed to support the carrying load in the stance phase. The following control mode is used to shut down the DC motor to disable the pump and open the relief valve in the swing phase. In the position control, an online Gaussian process regression algorithm is proposed to estimate the human gait trajectory using the human robot interaction signals. A general position control strategy, i.e., proportion integration differentiation (PID), is utilized to control the exoskeleton to shadow the estimated human gait trajectory. In the following control, the operator can lead the mechanical legs with the help of embedded springs on the cylinder rod. Experiments are performed on the healthy human subject, who walks on the level ground at natural speed. The experimental results demonstrate that the proposed hybrid control strategy is suitable for the pump-based hydraulically actuated lower extremity exoskeleton.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.References
Dollar, A.M., Herr, H.: Lower extremity exoskeletons and active orthoses: challenges and state-of-the-art. IEEE Trans. Robot. 24(1), 144–158 (2008)
Zoss, A.B., Kazerooni, H., Chu, A.: Biomechanical design of the berkeley lower extremity exoskeleton (BLEEX). IEEE/ASME Trans. Mechatronics 11(2), 128–138 (2006)
Sankai, Y.: Hybrid Assistive Limb Based on Cybernics. Robotics Research, pp. 25–34. Springer, Berlin (2010)
Letier, P., Motard, E., Verschueren, J.P.: EXOSTATION: haptic exoskeleton based control station. In: Proceedings of the IEEE International Conference on Robotics and Automation (ICRA), pp. 1106–1107 (2010)
Stegall, P., Winfree, K., Zanotto, D.: Rehabilitation exoskeleton design: exploring the effect of the anterior lunge degree of freedom. IEEE Trans. Robot. 29(4), 838–846 (2013)
Anam, K., Jumaily, A.A.: Active exoskeleton control systems: state of the art. Procedia Eng. 41, 988–994 (2012)
Kazerooni, H., Steger, R.: The Berkeley lower extremity Exoskeleton. Trans. ASME, J. Dyn. Syst., Meas. Control 128, 14–25 (2006)
Huo, W., Mohammed, S., Moreno, J.C., Amirat, Y.: Lower limb wearable robots for assistance and rehabilitation: a state of the art. IEEE Syst. J. 10(1), 1068–1081 (2017)
Zoss, A., Kazerooni, H., Zoss, A., Kazerooni, H.: Architecture and hydraulics of a lower extremity exoskeleton. In: Proceedings of ASME International Mechanical Engineering Congress and Exposition, pp. 1447–1455 (2005)
Adam, B.Z.: Actuation Design and Implementation for Human Performance Enhancement. University of California, Berkeley (2006)
Kazerooni, H.: The Berkeley Lower Extremity Exoskeleton. Field and Service Robotics, pp. 9–15. Springer, Berlin (2006)
Karlin, S.: Raiding iron man’s closet [Geek Life]. IEEE Spectr. 48(8), 25–25 (2011)
Ackerman, S.: The report of production display for HULC made in lockheed martin, montgomery county, md USA. http://www.lockheedmartin.com/ (2010)
Kazerooni, H., Steger, R., Huang, L.: Hybrid control of the berkeley lower extremity exoskeleton (BLEEX). Int. J. Robot. Res. 25(5-6), 561–573 (2006)
Kazerooni, H., Racine, J.L., Huang, L., Steger, R.: On the control of the Berkeley lower extremity exoskeleton (BLEEX). In: Proceedings of the 2005 IEEE International Conference on Robotics and Automation, ICRA, pp. 4353–4360 (2005)
Guo, Q., Li, S.J., Jiang, D.: Lower extremity exoskeleton: human-machine coupled modeling, robust control design, simulation, and overload-carrying experiment. Math. Probl. Eng. 1, 1–15 (2015)
Guo, Q., Jiang, D.: Method for walking gait identification in a lower extremity Exoskeleton based on C4.5 decision tree algorithm. Int. J. Adv. Robot. Syst. 12, 1–11 (2015)
Long, Y., Du, Z.J., Wang, W.D., Dong, W.: Robust sliding mode control based on GA optimization and CMAC compensation for lower limb exoskeleton. Appl. Bionics Biomech. 2016, 1–13 (2016)
Long, Y., Du, Z.J., Wang, W.D., Dong, W.: Development of a wearable exoskeleton rehabilitation system based on hybrid control mode. Int. J. Adv. Robot. Syst. 13(5), 1–10 (2016)
Long, Y., Du, Z.J., Wang, W.D., et al.: PSO-SVM-based online locomotion mode identification for rehabilitation robotic exoskeletons. Sensors 16(9), 1408 (2016)
Long, Y., Du, Z.J., Cong, L., et al.: Active disturbance rejection control based human gait tracking for lower extremity rehabilitation exoskeleton. ISA Trans. 67, 389–397 (2017)
Long, Y., Du, Z.J., Dong, W., et al.: Human Gait Trajectory Learning Using Online Gaussian Process for Assistive Lower Limb Exoskeleton. Wearable Sensors and Robots, pp. 165–179. Springer, Singapore (2017)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Long, Y., Du, Zj., Chen, Cf. et al. Hybrid Control Scheme of a Hydraulically Actuated Lower Extremity Exoskeleton for Load-Carrying. J Intell Robot Syst 91, 493–500 (2018). https://doi.org/10.1007/s10846-017-0708-1
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10846-017-0708-1