Abstract
Control and manipulation of the spin of conduction electrons in industrial semiconductors such as silicon are suggested as an operating principle for a new generation of spintronic devices. Coherent injection of spin-polarized carriers into Si is a key to this novel technology. It is contingent on our ability to engineer flawless interfaces of Si with a spin injector to prevent spin-flip scattering. The unique properties of the ferromagnetic semiconductor EuO make it a prospective spin injector into silicon. Recent advances in the epitaxial integration of EuO with Si bring the manufacturing of a direct spin contact within reach. Here we employ transmission electron microscopy to study the interface EuO/Si with atomic-scale resolution. We report techniques for interface control on a submonolayer scale through surface reconstruction. Thus we prevent formation of alien phases and imperfections detrimental to spin injection. This development opens a new avenue for semiconductor spintronics.
Similar content being viewed by others
Introduction
Impressive progress in data storage technology has arisen from the development of metallic spintronics based on giant magnetoresistance1. More recently, the focus has shifted towards spin transfer, semiconductor, molecular and single-electron spintronics. In particular, semiconductor spintronics2 offers transistor action with the promise of hybrid logic, communications and storage devices as well as computing based on dissipationless spin transport. Driven initially by studies of GaAs, a material with strong spin-orbit coupling and efficient optical orientation of spins, it is now exploring the benefits of silicon3.
The cornerstones of semiconductor spintronics â creation, manipulation and detection of spin polarization â are extremely challenging in nonmagnetic Si. Optical orientation of spins is inefficient in silicon, motivating approaches based on electrical spin injection. Direct injection of spin-polarized electrons from a ferromagnetic metal into Si is ineffective due to the impedance mismatch4. Also, intermixing at the interface with formation of metal silicides hinders spin transport5. Moreover, interface roughness6 and magnetic domain structure7 reduce spin accumulation and enhance spin relaxation.
As metals are ineffective injectors, a number of alternatives have been proposed. The use of ferromagnetic tunnel contacts is thought to be a robust approach â the spin polarization of electrons thus injected into Si is detected using optical8, local9 and non-local10 electrical methods. The injection is highly sensitive to both the material of the barrier11 and its growth conditions12. Alternatively, spin currents can be induced by ballistic hot electrons13, dynamical14, thermal15, or acoustic16 injection. However, all these approaches need major advances to become technologically viable.
Spin injection technologies based on insulating tunnel barriers are plagued by high contact resistance at the interface: the next generation of spin MOSFETs would require a drastic reduction of the resistance between source and drain. The impedance mismatch problem suggests half-metallic17 or semiconductor injectors. A heterostructure of a ferromagnetic semiconductor in direct contact with a non-magnetic semiconductor would be a straightforward solution18. However, the problem of intermixing at the interface persists. Thus, a clean flawless interface between the semiconductors is indispensable.
EuO is a semiconductor with inherent ferromagnetism which can be tuned by strain19, doping20 or optical pumping21. Remarkable bulk properties â a metal-insulator transition accompanied by 13â15 orders of magnitude change in resistivity, colossal magnetoresistivity effect of 6 orders of magnitude in a magnetic field of 2âT, pronounced magneto-optics effects â distinguish EuO among magnetic materials. Being a magnetically homogeneous22 source of almost fully spin-polarized electrons23,24, it becomes a playground material for interfacial spin effects in theoretical simulations25,26,27. Among magnetic semiconductors, EuO is a leading candidate for integration with Si due to the materialsâ structural and electronic compatibility and the thermodynamic stability of the EuO/Si contact28. However, despite tremendous efforts to integrate these semiconductors29,30,31,32,33,34,35,36, the epitaxial growth of EuO directly on silicon has not been accomplished until now. In a recent paper37 we advocated a significant revision of the growth procedure; this procedure has now been implemented. Magnetic and X-ray studies of the resulting films are highly encouraging, suggesting that the development of direct EuO/Si spin contacts may soon become practically feasible.
Here, we report a novel technology for integration of functional oxides with silicon which solves the long-standing problem of direct epitaxial growth of the EuO/Si structure. We demonstrate that interface engineering through surface reconstruction controls the outcome of the growth. High-resolution transmission electron microscopy (TEM) shows a clean atomically sharp EuO/Si interface without any alien phases, which were an insurmountable obstacle in previous attempts. Well-developed thickness fringes â coherent oscillations of X-ray diffraction (XRD) intensity â provide another strong confirmation of the atomically abrupt EuO/Si interface. Furthermore, TEM reveals the mechanism for relaxation of strains arising from the lattice mismatch between the semiconductors.
Results and Discussion
Integration of ionic functional oxides with covalent Si is always challenging but an epitaxial growth of EuO directly on Si faces additional difficulties. Although both Si and EuO are cubic, the lattice mismatch is large (+5.6%). The most important problem, however, is the high chemical reactivity of the substances involved. First, an excess of oxygen leads to higher oxides Eu3O4 and Eu2O3. Both Eu and O2 react with the substrate forming europium silicide and silicon oxide, respectively, phases preventing direct contact between EuO and Si. High temperature may cause intermixing of EuO and Si at the interface. This is a most critical issue because alien phases at the interface are highly detrimental to spin injection. The same is true for integration of EuO with Si through a spacer preventing chemical reactions31 â a buffer layer between EuO and Si derails spin injection by reducing it to tunnelling. Thus, both protection of the Si surface from chemical processes at the interface and the growth regime of EuO directly on Si are of paramount importance.
The unreconstructed bare Si (001) surface constitutes a square array of atoms with two singly occupied dangling bonds. Then, pairs of Si atoms dimerize leaving one dangling bond per atom. Dimer rows along and crystallographic directions correspond to a two-domain surface with 2âÃâ1 and 1âÃâ2 reconstruction domains (according to in situ reflection high-energy electron diffraction, RHEED). They stem from the two surface terminations of the Si lattice, separated by steps of an odd number of Si monolayers. Unpaired electrons make the surface highly susceptible to chemical reactions.
The Si surface with free valences saturated by metal atoms (typically Sr)38 is a standard template to grow functional oxides. Without surface states within the Si bandgap, the resulting 1âÃâ2 superstructure (submonolayer surface silicide SrSi2) is chemically resistant even if oxide growth transforms it into a surface silicate39,40. Such a Sr-passivated Si surface is a prerequisite for successful growth of alkaline earth and perovskite oxides41.
However, the 1âÃâ2 superstructure does not enable direct EuO/Si contact with subsequent epitaxial growth35. High resolution analytical scanning transmission electron microscopy (STEM) is an ultimate test of the quality of the interface. Recent atomic-resolution study of the EuO/Si interface with high-angle annular dark field (HAADF) scanning transmission electron microscopy accompanied by electron energy loss spectroscopy (EELS) reveals that EuO and Si are separated by several nm of harmful alien phases â either an unidentified disordered region or bulk europium silicide covered by and mixed with some Eu (III) non-magnetic phase(s)35 â a structure which precludes efficient spin injection. Similarly, silicide regions and a non-crystalline layer at the interface are detected by high-resolution TEM for EuO grown on H-passivated silicon36. Thus, both approaches suggested so far â Si surface passivation either by the 1âÃâ2 metal-based superstructure or by hydrogen â do not solve the problem of the formation of the direct EuO/Si contact. Moreover, H-passivation introduces further complications arising from an additional chemical element in the system. We find a deliberate engineering of the EuO/Si interface by a metal-based superstructure to be by far more advanced technique.
Following the metal-based superstructure paradigm we first tested the 1âÃâ2 reconstruction (Fig. 1a). To identify the problem we varied the growth conditions â the substrate temperature, the Eu beam and the oxygen pressure. It turns out that the intended EuO/Si contact is unattainable by these means. In particular, low temperature growth leads to disordered layers while higher temperature instigates chemical reactions at the interface. Figure 2 outlines a typical outcome of the growth. A cross-sectional HAADF-STEM image of the film at low magnification (Fig. 2a) shows the absence of the direct EuO/Si contact. Nevertheless, EuO is epitaxially integrated with Si. This fact is reflected on the selected area (electron) diffraction pattern (SADP) of EuO superimposed with that of Si (Fig. 2b) demonstrating the cube-on-cube orientation coupling. Energy dispersive X-ray spectroscopy (EDXS) certifies that the ratio Eu:O at point 1 is 1:1 within the methodâs accuracy which proves EuO to be stoichiometric. In contrast, the by-product at point 2 is devoid of oxygen which signifies formation of a bulk silicide. The standardless quantitative EDXS analysis reveals the 1:2 stoichiometry of Eu:Si. A close-up look at the film (Fig. 2c) detects crystalline precipitates. Their linear size is up to 20ânm. In fact, the outcome of our attempts to achieve the direct EuO/Si contact based on the 1âÃâ2 reconstruction turns out to be unsuccessful to roughly the same extent as that of Mundy et al.35 â the result which clearly calls for an alternative approach.
The ternary phase diagram of the Eu-O-Si system is rich. Among binary compounds, oxides EuO, Eu3O4 and Eu2O3 (monoclinic and cubic) and silicides EuSi2 (tetragonal and hexagonal), Eu3Si4, EuSi, Eu5Si3 and Eu2Si may form. The known ternary compounds are Eu (II) orthosilicate Eu2SiO4 (monoclinic and orthorhombic) and Eu (III) disilicate Eu2Si2O7. Figure 2d shows EELS spectra for the EuO and precipitate regions: a peak characteristic for oxygen is well developed for EuO regions but is missing in the case of the precipitate. This fact indicates that the precipitate may be a binary Eu silicide. Figure 2e presents a two-dimensional Fourier spectrum from the region highlighted on Fig. 2c. Comparison with the known structures for bulk silicides assigns the image to tetragonal (I41/amd, space group #141) EuSi242 with the [111] zonal axis (the simulated SADP of EuSi2 matching the Fourier spectrum is given in Fig. 2f). It is worth to note that a detailed study of the film also reveals precipitate regions formed by the same tetragonal EuSi2 but oriented along the [201] axis.
The presence of precipitates calls for a better protection of the substrate surface. The formation of bulk Eu silicide suggests that the surface requires protection from Eu. On the other hand, surface reactions with oxygen which lead to disintegration of the substrate protection are equally important to suppress. As a consequence, we endeavoured to find a better way to prevent surface reactivity. The solution comes from our realization that metal superstructures other than 1âÃâ2 can be used for interfacing Si and oxide. The almost identical ionic radii of Eu2+ and Sr2+ ensure the well-known isomorphism of Eu (II) and Sr compounds with close structural parameters. One can expect similar phase diagrams for superstructures of these metals on the Si surface. Indeed, not only stoichiometric MSi2 but also equivalent 2âÃâ3 surface reconstructions are known for Eu and Sr43,44. The latter structure is not suitable for oxide epitaxy43 due to incomplete saturation of dangling bonds. It is more practical to use surface structures with a high metal coverage which have an advantage of full valence saturation and additional resistance with respect to oxidation. Such reconstructions (1âÃâ5 and 1âÃâ3) are known for Sr on Si (001).
The use of metal-rich silicide templates is in line with the original recipe for the growth of crystalline oxides on silicon38: the surface silicide is covered with an alkaline earth metal at low temperature to prevent oxidation of the silicide submonolayer at the initial stage of oxygen supply to the chamber. Instead, our intent is to provide an additional protection by chemically bound rather than physically adsorbed metal atoms. Following this route, we managed to get a stable, previously unknown 1âÃâ5 (according to RHEED, Fig. 1b) reconstruction of Eu on Si by subjecting the clean Si surface to a Eu flux at 660 °C. The spatial structure of surface silicides with the 1âÃâ5 reconstruction is not known; even the metal coverage of the surface is debated45, with estimates ranging from 0.8 to 1.5 monolayers. The only consensus reached so far is that the 1âÃâ5 reconstruction contains somewhat larger amount of metal than the well-known 1âÃâ2 SrSi2 structure. This fact suggests breaking of some surface Si dimers susceptible to oxidation and saturation of the broken bonds by metal atoms. It is likely that at the initial stage of the growth the 1âÃâ5 surface silicide is partially oxidized similar to that for the 1âÃâ2 reconstruction40.
The replacement of the 1âÃâ2 by 1âÃâ5 reconstruction (Fig. 1) is a fundamental change of the growth technology dramatically affecting the outcome. Such a change may be beneficial even in the uncomplicated case of the growth of lattice-matched Ba0.7Sr0.3O on Si (001)46. As for complex cases like the EuO/Si contact, it turns out to be vital. Indeed, we witness a remarkable improvement of the quality of the EuO films. Characterization is carried out by a combination of different techniques. The x-ray diffraction θâ2θ spectrum (Fig. 3) shows well-developed peaks of EuO (200), (400) and (600) reflections without any signs of alien phases. This contrasts strongly with previous attempts35,36. In particular, integration of EuO with Si based on the 1âÃâ2 reconstruction results in films contaminated by the EuSi2 alien phase at the interface as revealed by XRD35. Moreover, well-resolved thickness fringes are observed not only for EuO (200) (Fig. 4) but also for EuO (400) and EuO (600) peaks47. This characteristic feature of x-ray diffraction is a result of wave interference due to reflections at the interfaces. As the value of the x-ray wave length (1.5418âà ) is smaller than the interatomic distance, the observation of thickness fringes is a fingerprint of atomically abrupt interfaces; otherwise the reflected waves cannot maintain the coherence and thickness fringes would not show up. This remarkable result not only points to the sharpness of the EuO interfaces but also reflects a superb structural quality of the film48. As far as we know, there are no reports by other groups of thickness fringes in the XRD pattern for EuO thin films. The respective positions of EuO and Si peaks on the (202) reflection Ï-scan indicate that the vertical facets of EuO and Si are aligned in parallel. Magnetic measurements supported by Rutherford backscattering (RBS) estimation of Eu content in the films determine the moment of Eu atoms to be 7 μB while the Curie temperature (69âK) matches that of bulk EuO (Fig. 5). RBS itself reveals the perfect EuO stoichiometry. Furthermore, RBS spectra exhibit strong channeling â yet another indication of the epitaxial integration of EuO and Si. Transport measurements demonstrate highly insulating behaviour of the EuO films further confirming the perfect stoichiometry.
The eye-catching effect of the technology change is revealed by electron microscopy. Figure 6 demonstrates a typical cross-sectional HAADF-STEM image at low magnification â no alien phases at the interface are detected (cf. Fig. 2a). A high-resolution HAADF-STEM image (Fig. 7) confirms that the crystalline EuO film is in direct contact with the Si (001) surface. Figure 7 demonstrates an atomically abrupt EuO/Si interface. This conclusion can also be drawn from a high-resolution bright-field TEM image of the same interface (inset of Fig. 8).
Thus, the long-standing problem of interfacing EuO with Si is solved. The atomically sharp interface unravels the reason for well-developed thickness fringes in XRD images37. It is quite possible that similar results can be obtained with the growth template formed by the 1âÃâ3 metal reconstruction â another metal-rich surface silicide. It remains to determine how the lattice mismatch between EuO and Si is relaxed. It is better seen on bright-field TEM images. Figure 8 shows a fragment of the EuO/Si interface with different magnification. Defects marked by arrows are identified as stacking faults associated with Shockley partial dislocations, typical to fcc structures. Stacking faults tend to terminate: crude estimates determine their density to halve over the thickness of the EuO film. This mechanism may explain relaxation of strains caused by the lattice mismatch between EuO and Si.
In summary, we have successfully demonstrated the epitaxial growth of the ferromagnetic semiconductor EuO directly on silicon. Electron microscopy reveals an atomically abrupt EuO/Si interface. This quantum leap in the quality of EuO films comes from interface engineering â the first monolayer is formed by the 1âÃâ5 metal superstructure instead of the standard 1âÃâ2 reconstruction. It strongly suppresses unwanted chemical reactions. However, the change of the reconstruction is not sufficient for engineering the direct EuO/Si contact. Diligent tuning of the growth conditions is indispensable.
Future research should address a number of questions: the usefulness of other reconstructions, benefits for the growth of other functional oxides on Si, the structure of the surface reconstructions, possible oxidation of the silicide during oxide growth, the effect of the silicide on the resulting electronic properties of the interface. We hope that this breakthrough in the material engineering will be followed by a successful spin injection through the manufactured spin contact.
Methods
Synthesis
EuO films are grown in Riber Compact 12 system for molecular beam epitaxy furnished with a UHV system comprising Gamma Vacuum Titan Ion Pump, cryopump Cryo-Torr 8 (Brooks CTI Cryogenics), a titanium sublimation pump and cryopanels cooled down by liquid nitrogen. The pressure of residual gases is less than 10â10 Torr. 4N Eu and SiO (for capping) are supplied from Knudsen cell effusion sources. Molecular oxygen (6N) flux is tuned with the gas flow system based on the mass flow controller and Baratron manometer. The cell and substrate temperatures are controlled with thermocouples while the absolute temperature of the substrate is determined with PhotriX ML-AAPX/090 infrared pyrometer (LumaSense Technologies) operating at the 0.9 μm wavelength. The intensity of molecular beams is measured with a Bayard-Alpert ionization gauge fitted at the substrate site.
The substrates are high-ohmic compensated Si (001) wafers with miscut angles not exceeding 0.5°. The natural surface oxide is removed by heating at 950 °C. The (2âÃâ1) reconstructed Si surface is exposed to a flux of Eu atoms at 660 °C until a stable (1âÃâ5) Eu/Si superstructure is formed. EuO films are grown at a temperature of 340â±â10â°C. The oxygen pressure is about 6·10â9 Torr. The corresponding Eu flux comes from the effusion cell heated to 500â±â10â°C. The growth rate at these conditions is determined to be â¼2 monolayers per minute. The surface of EuO is protected either by a capping layer of SiO or by controlled oxidation of its topmost layer with formation of Eu2O3. The quality of the films does not depend on the capping layer and does not deteriorate with time for at least one year.
Transmission Electron Microscopy
The samples for analytical TEM/STEM are prepared in a Helios (FEI) scanning electron microscope (SEM)/Focus Ion Beam (FIB) dual beam system equipped with gas injectors for C and Pt deposition and a micromanipulator (Omniprobe). First, a 2 μm Pt layer is deposited on the surface of the sample. FIB milling (30âkeV Ga+ ions) results in 2 μm thick cross-sections of approximately 8âÃâ5 μm2 area; then attached to the Omniprobe semiring. Electron transparency is achieved by further thinning and final cleaning with 5âkeV and 2âkeV Ga+ ion beams, respectively. The cross-sections are covered by thin C layers to prevent oxidation of EuO in the Helios chamber before breaking the vacuum. The specimens are studied with a 300âkV TEM/STEM Titan 80â300 (FEI), with a 0.8âà STEM probe size and an EELS energy resolution of 0.75âeV. The microscope is equipped with a spherical aberration (Cs) corrector, a HAADF detector, an atmospheric thin-window energy dispersive X-ray spectrometer (Phoenix System, EDAX) and a post-column Gatan energy filter (GIF). Images are analysed with Digital Micrograph (Gatan) and Tecnai Imaging and Analysis (FEI) software.
Characterization
The surface of the films is controlled in situ with reflection high-energy electron diffractometer fitted with kSA 400 Analytical RHEED system (k-Space Associates, Inc.). This system allows for a 3D representation of the RHEED pattern (Fig. 1) which displays the signal intensity as a third coordinate. Such representation is more informative than the standard 2D representation. X-ray diffraction experiments are carried out with Bruker D8 Advance and Rigaku SmartLab 9kW spectrometers (CuKα X-ray source). Rutherford backscattering spectra are recorded for He ions with the energy 1.7âMeV. Magnetic properties are measured with SQUID magnetometer Quantum Design MPMS XL-7. Transport measurements are carried out using Lake Shore 9709A Hall effect measurement system.
Additional Information
How to cite this article: Averyanov, D. V. et al. Atomic-Scale Engineering of Abrupt Interface for Direct Spin Contact of Ferromagnetic Semiconductor with Silicon. Sci. Rep. 6, 22841; doi: 10.1038/srep22841 (2016).
References
Fert, A. Nobel lecture: Origin, development and future of spintronics. Rev. Mod. Phys. 80, 1517â1530 (2008).
Awschalom, D. D. & Flatté, M. E. Challenges for semiconductor spintronics. Nature Phys. 3, 153â159 (2007).
Jansen, R. Silicon spintronics. Nature Mater 11, 400â408 (2012).
Schmidt, G., Ferrand, D., Molenkamp, L. W., Filip, A. T. & van Wees, B. J. Fundamental obstacle for electrical spin injection from a ferromagnetic metal into a diffusive semiconductor. Phys. Rev. B 62, R4790âR4793 (2000).
Kioseoglou, G. et al. Electrical spin injection into Si: A comparison between Fe/Si Schottky and Fe/Al2O3 tunnel contacts. Appl. Phys. Lett. 94, 122106 (2009).
Dash, S. P. et al. Spin precession and inverted Hanle effect in a semiconductor near a finite-roughness ferromagnetic interface. Phys. Rev. B 84, 054410 (2011).
Ando, Y. et al. Effect of the magnetic domain structure in the ferromagnetic contact on spin accumulation in silicon. Appl. Phys. Lett. 101, 232404 (2012).
Jonker, B. T., Kioseoglou, G., Hanbicki, A. T., Li, C. H. & Thompson, P. E. Electrical spin-injection into silicon from a ferromagnetic metal/tunnel barrier contact. Nature Phys. 3, 542â546 (2007).
Dash, S. P., Sharma, S., Patel, R. S., de Jong, M. P. & Jansen, R. Electrical creation of spin polarization in silicon at room temperature. Nature 462, 491â494 (2009).
van ât Erve, O. M. J. et al. Electrical injection and detection of spin-polarized carriers in silicon in a lateral transport geometry. Appl. Phys. Lett. 91, 212109 (2007).
van ât Erve, O. M. J. et al. Low-resistance spin injection into silicon using graphene tunnel barriers. Nature Nanotech. 7, 737â742 (2012).
Dankert, A., Dulal, R. S. & Dash, S. P. Efficient spin injection into silicon and the role of the Schottky barrier. Sci. Rep. 3, 3196 (2013).
Appelbaum, I., Huang, B. & Monsma, D. J. Electronic measurement and control of spin transport in silicon. Nature 447, 295â298 (2007).
Shikoh, E. et al. Spin-pump-induced spin transport in p-type Si at room temperature. Phys. Rev. Lett. 110, 127201 (2013).
Uchida, K. et al. Observation of the spin Seebeck effect. Nature 455, 778â781 (2008).
Uchida, K. et al. Long-range spin Seebeck effect and acoustic spin pumping. Nature Mater. 10, 737â741 (2011).
Farshchi, R. & Ramsteiner, M. Spin injection from Heusler alloys into semiconductors: A materials perspective. J. Appl. Phys. 113, 191101 (2013).
Ohno, Y. et al. Electrical spin injection in a ferromagnetic semiconductor heterostructure. Nature 402, 790â792 (1999).
Souza-Neto, N. M., Haskel, D., Tseng, Y.-C. & Lapertot, G. Pressure-induced electron mixing and enhancement of ferromagnetic ordering in EuX (Xâ=âTe, Se, S, O) magnetic semiconductors. Phys. Rev. Lett. 102, 057206 (2009).
Jutong, N., Eckern, U., Mairoser, T. h. & Schwingenschlögl, U. Effect of Gd doping and O deficiency on the Curie temperature of EuO. Sci. Rep. 5, 8038 (2015).
Matsubara, M. et al. Ultrafast optical tuning of ferromagnetism via the carrier density. Nature Commun. 6, 6724 (2015).
Storchak, V. G. et al. Magnetic polarons in Eu-based films of magnetic semiconductors. Phys. Rev. B 81, 153201 (2010).
Steeneken, P. G. et al. Exchange splitting and charge carrier spin polarization in EuO. Phys. Rev. Lett. 88, 047201 (2002).
Santos, T. S. et al. Determining exchange splitting in a magnetic semiconductor by spin-filter tunnelling. Phys. Rev. Lett. 101, 147201 (2008).
Yang, H. X. et al. Proximity effects induced by magnetic insulators: First-principles calculations on spin filtering and exchange splitting gaps. Phys. Rev. Lett. 110, 046603 (2013).
Zhang, H., Wang, J., Xu, G., Xu, Y. & Zhang, S.-C. Topological states in ferromagnetic CdO/EuO superlattices and quantum wells. Phys. Rev. Lett. 112, 096804 (2014).
Garrity, K. F. & Vanderbilt, D. Chern insulator at a magnetic rocksalt interface. Phys. Rev. B 90, 121103(R) (2014).
Hubbard, K. J. & Schlom, D. G. Thermodynamic stability of binary oxides in contact with silicon. J. Mater. Res. 11, 2757â2776 (1996).
Lettieri, J. et al. Epitaxial growth and magnetic properties of EuO on (001) Si by molecular-beam epitaxy. Appl. Phys. Lett. 83, 975â977 (2003).
Santos, T. S. & Moodera, J. S. Observation of spin filtering with a ferromagnetic EuO tunnel barrier. Phys. Rev. B 69, 241203(R) (2004).
Schmehl, A. et al. Epitaxial integration of the highly spin-polarized ferromagnetic semiconductor EuO with silicon and GaN. Nature Mater. 6, 882â887 (2007).
Beukers, J. N. et al. Epitaxial EuO thin films by pulsed laser deposition monitored by in situ X-ray photoelectron spectroscopy. Thin Solid Films 518, 5173â5176 (2010).
Caspers, C. et al. Chemical stability of the magnetic oxide EuO directly on silicon observed by hard X-ray photoemission spectroscopy. Phys. Rev. B 84, 205217 (2011).
Caspers, C. et al. Ultrathin magnetic oxide EuO films on Si(001) using SiOx passivation â controlled by hard X-ray photoemission spectroscopy. J. Appl. Phys. 113, 17C505 (2013).
Mundy, J. A. et al. Hetero-epitaxial EuO interfaces studied by analytic electron microscopy. Appl. Phys. Lett. 104, 091601 (2014).
Caspers, C. et al. Controlling the EuO interface â epitaxial EuO spin contacts directly on Si. arXiv: 1504.05108v1 2015.
Averyanov, D. V. et al. Direct epitaxial integration of the ferromagnetic semiconductor EuO with silicon for spintronic applications. ACS Appl. Mater. Interf. 7, 6146â6152 (2015).
McKee, R. A., Walker, F. J. & Chisholm, M. F. Crystalline oxides on silicon: The first five monolayers. Phys. Rev. Lett. 81, 3014â3017 (1998).
Först, C. J., Ashman, C. R., Schwarz, K. & Blöchl, P. E. The interface between silicon and a high-k oxide. Nature 427, 53â56 (2004).
Segal, Y. et al. Atomic structure of the epitaxial BaO/Si(001) interface. Phys. Rev. Lett. 102, 116101 (2009).
Reiner, J. W. et al. Crystalline oxides on silicon. Adv. Mater. 22, 2919â2938 (2010).
Evers, J., Oehlinger, G. & Weiss, A. Effect of pressure on the structures of divalent metal disilicides MSi2 (Mâ=âCa, Eu, Sr). J. Solid State Chem. 20, 173â181 (1977).
Reiner, J. W., Garrity, K. F., Walker, F. J., Ismail-Beigi, S. & Ahn, C. H. Role of strontium in oxide epitaxy on silicon (001). Phys. Rev. Lett. 101, 105503 (2008).
Kuzmin, M., Perälä, R. E., Laukkanen, P. & Väyrynen, I. J. Atomic geometry and electronic structure of the Si(100)2âÃâ3-Eu surface phase. Phys. Rev. B 72, 085343 (2005).
Goodner, D. M. Atomic-scale surface studies of alkaline-earth metals on Si(001). PhD thesis, Northwestern University (2005).
Zachariae, J. & Pfnür, H. Growth conditions, stoichiometry and electronic structure of lattice-matched SrO/BaO mixtures on Si(100). Phys. Rev. B 72, 075410 (2005).
Averyanov, D. V. et al. Structural coupling across the direct EuO/Si interface. Nanotechnology 27, 045703 (2016).
Bowen, D. K. & Tanner, B. K. High-Resolution X-Ray Diffractometry and Topography (Taylor & Francis, London, 2005, 278 p).
Acknowledgements
We are grateful to Alexander Taldenkov (Kurchatov Institute) for magnetic measurements and Jess Brewer (University of British Columbia) for valuable discussions. The work is partially supported by NRC âKurchatov Instituteâ, Russian Foundation for Basic Research through grant 16-07-00204 and Russian Science Foundation through grant 14-19-00662.
Author information
Authors and Affiliations
Contributions
D.V.A., S.I.Z. and V.G.S. synthesized the EuO films. C.G.K., I.A.K. and A.L.V. carried out T.E.M. experiments. I.A.L. and D.V.A. performed X-ray studies. A.M.T. and V.G.S. carried out the analysis and wrote the paper with contributions from D.V.A. and A.L.V. All authors reviewed the manuscript.
Ethics declarations
Competing interests
The authors declare no competing financial interests.
Rights and permissions
This work is licensed under a Creative Commons Attribution 4.0 International License. The images or other third party material in this article are included in the articleâs Creative Commons license, unless indicated otherwise in the credit line; if the material is not included under the Creative Commons license, users will need to obtain permission from the license holder to reproduce the material. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/
About this article
Cite this article
Averyanov, D., Karateeva, C., Karateev, I. et al. Atomic-Scale Engineering of Abrupt Interface for Direct Spin Contact of Ferromagnetic Semiconductor with Silicon. Sci Rep 6, 22841 (2016). https://doi.org/10.1038/srep22841
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/srep22841