The ADMORPH Approach for Adaptively Morphing Embedded Systems
Abstract
Due to the increasing performance demands of missionand safety-critical Cyber-Physical Systems (of Systems), these systems exhibit a rapidly growing complexity, manifested by an increasing number of (distributed) computational cores and application components connected via complex networks. However, with these systems' growing complexity and interconnectivity, the chances of hardware failures and disruptions due to cyber-attacks will also quickly increase.
References
[1]
D. Sapra and A. D. Pimentel, "Exploring multi-core systems with lifetime reliability and power consumption trade-offs," in Embedded Computer Systems: Architectures, Modeling, and Simulation: 23rd International Conference, SAMOS 2023, Springer, 2023.
[2]
A. D. Pimentel, "Exploring exploration: A tutorial introduction to embedded systems design space exploration," IEEE Design & Test, vol. 34, no. 1, 2017.
[3]
J. Roeder, B. Rouxel, S. Altmeyer, and C. Grelck, "Towards energy-, time- and security-aware multi-core coordination," in 22nd International Conference on Coordination Models and Languages (COORDINATION 2020), Malta (S. Bliudze and L. Bocchi, eds.), vol. 12134 of Lecture Notes in Computer Science, pp. 57--74, Springer, 2020.
[4]
B. Rouxel, U. Pagh Schultz, B. Akesson, J. Holst, O. Jorgensen, and C. Grelck, "PReGO: a generative methodology for satisfying real-time requirements on cots-based systems: Definition and experience report," in 19th ACM SIGPLAN International Conference on Generative Programming: Concepts and Experiences (GPCE 2020), Chicago, USA, pp. 70--83, ACM, 2020.
[5]
J. Roeder, B. Rouxel, S. Altmeyer, and C. Grelck, "Energyaware scheduling of multi-version tasks on heterogeneous real-time systems," in 36th ACM/SIGAPP Symposium on Applied Computing (SAC 2021), pp. 500--510, ACM, 2020.
[6]
J. Roeder, B. Rouxel, and C. Grelck, "Scheduling dags of multi-version multi-phase tasks on heterogeneous realtime systems," in 14th IEEE International Symposium on Embedded Multicore/Many-core Systems-on-Chip (MCSoC 2021), Singapore, IEEE, 2021.
[7]
B. Rouxel, S. Altmeyer, and C. Grelck, "YASMIN: a Realtime Middleware for COTS Heterogeneous Platforms," in 22nd ACM/IFIP International Middleware Conference (MIDDLEWARE 2021), ACM, 2021.
[8]
L. Miedema and C. Grelck, "Strategy Switching: Smart Fault-tolerance for Weakly-hard Resource-constrained Real-time Applications," in Software Engineering and Formal Methods, 20th International Conference, SEFM 2022, pp. 129--145, Springer, LNCS 13550, 2022.
[9]
M. Maggio, A. Hamann, E. Mayer-John, and D. Ziegenbein, "Control system stability under consecutive deadline misses constraints," in ECRTS, Euromicro Conference on Real-Time Systems, 2020.
[10]
N. Vreman, A. Cervin, and M. Maggio, "Stability and performance analysis of control systems subject to bursts of deadline misses," in ECRTS, Euromicro Conference on Real-Time Systems, 2021.
[11]
G. Bernat, A. Burns, and A. Liamosi, "Weakly hard realtime systems," IEEE Transactions on Computers, vol. 50, no. 4, pp. 308--321, 2001.
[12]
N. Vreman, R. Pates, and M. Maggio, "WeaklyHard.jl: Scalable analysis of weakly-hard constraints," in RTAS, IEEE Real-Time and Embedded Technology and Applications Symposium, 2022.
[13]
N. Vreman, P. Pazzaglia, V. Magron, J.Wang, and M. Maggio, "Stability of linear systems under extended weaklyhard constraints," IEEE Control Systems Letters, vol. 6, pp. 2900--2905, 2022.
[14]
B. J. Josephrexon and M. Maggio, "Experimenting with networked control software subject to faults," in 2022 IEEE 61st Conference on Decision and Control (CDC), pp. 1547--1552, 2022.
[15]
P. Pazzaglia and M. Maggio, "Characterizing the effect of deadline misses on time-triggered task chains," IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems, vol. 41, no. 11, pp. 3957--3968, 2022.
[16]
P. Pazzaglia, A. Hamann, D. Ziegenbein, and M. Maggio, "Adaptive design of real-time control systems subject to sporadic overruns," in DATE, Design, Automation and Test in Europe Conference, 2021.
[17]
S. Tverdyshev, H. Blasum, B. Langenstein, J. Maebe, B. De Sutter, B. Leconte, B. Triquet, K. Müller, M. Paulitsch, A. Söding-Freiherr von Blomberg, and A. Tillequin, "MILS Architecture," Sept. 2013.
[18]
M. Kadar, Integration Methods for Host Intrusion Detection into Embedded Mixed-Criticality Systems. PhD thesis, TU Kaiserslautern, 2022.
[19]
D. Kuzhiyelil, P. Zieris, M. Kadar, S. Tverdyshev, and G. Fohler, "Towards Transparent Control-Flow Integrity in Safety-Critical Systems," in Information Security, Lecture Notes in Computer Science, (Cham), pp. 290--311, Springer International Publishing, 2020.
Recommendations
Towards Independent In-Cloud Evolution of Cyber-Physical Systems
CPSNA '14: Proceedings of the 2014 IEEE International Conference on Cyber-Physical Systems, Networks, and ApplicationsThe capabilities of Cyber-Physical Systems (CPSs) are increasingly being extended towards new composite services deployed across a range of smart sensing and controlling devices. These services enable the emergence of multiple end-to-end cyber-physical ...
Which IT Governance for Distributed Intelligent Cyber-Physical Systems?
COMPSAC '15: Proceedings of the 2015 IEEE 39th Annual Computer Software and Applications Conference - Volume 02Cyber-Physical systems become increasingly interconnected. Mastering the governance of such systems, in particular in the era of the Internet of Things and Industry 4.0, where CPS are part of large (infra)-strcutures that span across boundaries of ...
On synergies of cyber and physical security modelling in vulnerability assessment of railway systems
Display Omitted Cyber-physical systems need holistic methods to discover relationships between physical and cyber components.Security threats attempt to both physical and cyber elements.Model-driven techniques accounting for joint physical and cyber-...
Comments
Information & Contributors
Information
Published In
December 2023
80 pages
Copyright © 2024 Copyright is held by the owner/author(s).
Permission to make digital or hard copies of part or all of this work for personal or classroom use is granted without fee provided that copies are not made or distributed for profit or commercial advantage and that copies bear this notice and the full citation on the first page. Copyrights for third-party components of this work must be honored. For all other uses, contact the Owner/Author.
Publisher
Association for Computing Machinery
New York, NY, United States
Publication History
Published: 07 June 2024
Published in SIGADA Volume 43, Issue 2
Check for updates
Author Tags
Qualifiers
- Article
Contributors
Other Metrics
Bibliometrics & Citations
Bibliometrics
Article Metrics
- 0Total Citations
- 38Total Downloads
- Downloads (Last 12 months)38
- Downloads (Last 6 weeks)3
Reflects downloads up to 02 Feb 2025
Other Metrics
Citations
View Options
Login options
Check if you have access through your login credentials or your institution to get full access on this article.
Sign in