Add to BibSonomy
Abstract
The volumetric calibration of a plenoptic camera is explored to correct for inaccuracies due to real-world lens distortions and thin-lens assumptions in current processing methods. Two methods of volumetric calibration based on a polynomial mapping function that does not require knowledge of specific lens parameters are presented and compared to a calibration based on thin-lens assumptions. The first method, volumetric dewarping, is executed by creation of a volumetric representation of a scene using the thin-lens assumptions, which is then corrected in post-processing using a polynomial mapping function. The second method, direct light-field calibration, uses the polynomial mapping in creation of the initial volumetric representation to relate locations in object space directly to image sensor locations. The accuracy and feasibility of these methods is examined experimentally by capturing images of a known dot card at a variety of depths. Results suggest that use of a 3D polynomial mapping function provides a significant increase in reconstruction accuracy and that the achievable accuracy is similar using either polynomial-mapping-based method. Additionally, direct light-field calibration provides significant computational benefits by eliminating some intermediate processing steps found in other methods. Finally, the flexibility of this method is shown for a nonplanar calibration.
© 2018 Optical Society of America
Full Article | PDF ArticleMore Like This
Xin Jin, Xufu Sun, and Chuanpu Li
Opt. Express 28(3) 3428-3441 (2020)
Qingsong Liu, Xiaofang Xie, Xuanzhe Zhang, Yu Tian, Jun Li, Yan Wang, and Xiaojun Xu
Appl. Opt. 59(14) 4209-4219 (2020)
Zewei Cai, Xiaoli Liu, Giancarlo Pedrini, Wolfgang Osten, and Xiang Peng
Opt. Express 27(15) 20177-20198 (2019)