Jari Kokkola

Drying of pulpwood in northern Finland.

Kokkola J. (1993). Drying of pulpwood in northern Finland. Silva Fennica vol. 27 no. 4 article id 5522. https://doi.org/10.14214/sf.a15683

Abstract

Drying of pulpwood bolts of Scots pine (Pinus sylvestris L.), birch (Betula spp.) and Norway spruce (Picea abies (L.) H. Karst.) was studied by measuring the drying of sample bolts placed in experimental piles. The results revealed that the main factors affecting timber drying are debarked surface area, moisture content at the time of felling and the size of the bolt. Furthermore, pine and spruce bolts located in the upper part of the pile dry better than bolts near the ground.

The investigation of green weight changes of whole piles of pine and birch was based on data collected in 1987–91. The green weight of piles was dependent mainly on storage time and on region; effect of weather variables could not be distinguished. Specific calibrating coefficients for motor-manual and mechanical cutting were included in the green weight equations.

Comparison between green weight equations and detected weight losses of sample piles indicates that fitted models seem to produce at least approximate results for the green weights, the said results thus lending themselves to be utilized as part of a transportation cost model.

The PDF includes an abstract in Finnish.

Keywords
pulpwood; storage; moisture; green weight; storage weight loss

Published in 1993

Views 2071

Available at https://doi.org/10.14214/sf.a15683 | Download PDF