Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Wikipedia

Ferrocene

Ferrocene is an organometallic compound with the formula Fe(C5H5)2. The molecule is a complex consisting of two cyclopentadienyl rings sandwiching a central iron atom. It is an orange solid with a camphor-like odor that sublimes above room temperature, and is soluble in most organic solvents. It is remarkable for its stability: it is unaffected by air, water, strong bases, and can be heated to 400 °C without decomposition. In oxidizing conditions it can reversibly react with strong acids to form the ferrocenium cation Fe(C5H5)+2.[7] Ferrocene and the ferrocenium cation are sometimes abbreviated as Fc and Fc+ respectively.

Ferrocene
Names
Preferred IUPAC name
Ferrocene[1]
Other names
  • Dicyclopentadienyl iron
  • Bis(η5-cyclopentadienyl)iron
  • Iron(II) cyclopentadienide
Identifiers
ChEBI
ChemSpider
ECHA InfoCard 100.002.764 Edit this at Wikidata
UNII
  • InChI=1S/2C5H5.Fe/c2*1-2-4-5-3-1;/h2*1-5H;/q2*-1;+2 checkY
    Key: KTWOOEGAPBSYNW-UHFFFAOYSA-N checkY
  • InChI=1/2C5H5.Fe/c2*1-2-4-5-3-1;/h2*1-5H;/q2*-1;+2
    Key: KTWOOEGAPBSYNW-UHFFFAOYAZ
  • [CH-]1C=CC=C1.[CH-]1C=CC=C1.[Fe+2]
Properties
C10H10Fe
Molar mass 186.04 g/mol
Appearance light orange powder
Odor camphor-like
Density 1.107 g/cm3 (0 °C)
1.490 g/cm3 (20 °C)[2]
Melting point 172.5 °C (342.5 °F; 445.6 K)[4]
Boiling point 249 °C (480 °F; 522 K)
Insoluble in water, soluble in most organic solvents
log P 2.04050[3]
Structure
D5h (eclipsed)
D5d (staggered)
Sandwich structure with iron centre
Hazards
NFPA 704 (fire diamond)
[6]
NFPA 704 four-colored diamondHealth 3: Short exposure could cause serious temporary or residual injury. E.g. chlorine gasFlammability 2: Must be moderately heated or exposed to relatively high ambient temperature before ignition can occur. Flash point between 38 and 93 °C (100 and 200 °F). E.g. diesel fuelInstability 1: Normally stable, but can become unstable at elevated temperatures and pressures. E.g. calciumSpecial hazards (white): no code
3
2
1
NIOSH (US health exposure limits):
PEL (Permissible)
 TWA 15 mg/m3 (total) TWA 5 mg/m3 (resp)[5]
REL (Recommended)
 TWA 10 mg/m3 (total) TWA 5 mg/m3 (resp)[5]
IDLH (Immediate danger)
 N.D.[5]
Related compounds
Related compounds
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
☒N verify (what is checkY☒N ?)

The first reported synthesis of ferrocene was in 1951. Its unusual stability puzzled chemists, and required the development of new theory to explain its formation and bonding. The discovery of ferrocene and its many analogues, known as metallocenes, sparked excitement and led to a rapid growth in the discipline of organometallic chemistry. Geoffrey Wilkinson and Ernst Otto Fischer, both of whom worked on elucidating the structure of ferrocene, later shared the 1973 Nobel Prize in Chemistry for their work on organometallic sandwich compounds. Ferrocene itself has no large-scale applications, but has found more niche uses in catalysis, as a fuel additive, and as a tool in undergraduate education.

History

edit

Discovery

edit

Ferrocene was discovered by accident twice. The first known synthesis may have been made in the late 1940s by unknown researchers at Union Carbide, who tried to pass hot cyclopentadiene vapor through an iron pipe. The vapor reacted with the pipe wall, creating a "yellow sludge" that clogged the pipe. Years later, a sample of the sludge that had been saved was obtained and analyzed by Eugene O. Brimm, shortly after reading Kealy and Pauson's article, and was found to consist of ferrocene.[7][8]

The second time was around 1950, when Samuel A. Miller, John A. Tebboth, and John F. Tremaine, researchers at British Oxygen, were attempting to synthesize amines from hydrocarbons and nitrogen in a modification of the Haber process. When they tried to react cyclopentadiene with nitrogen at 300 °C, at atmospheric pressure, they were disappointed to see the hydrocarbon react with some source of iron, yielding ferrocene. While they too observed its remarkable stability, they put the observation aside and did not publish it until after Pauson reported his findings.[7][9][10] Kealy and Pauson were later provided with a sample by Miller et al., who confirmed that the products were the same compound.[8]

In 1951, Peter L. Pauson and Thomas J. Kealy at Duquesne University attempted to prepare fulvalene ((C5H4)2) by oxidative dimerization of cyclopentadiene (C5H6). To that end, they reacted the Grignard compound cyclopentadienyl magnesium bromide in diethyl ether with ferric chloride as an oxidizer.[7] However, instead of the expected fulvalene, they obtained a light orange powder of "remarkable stability", with the formula C10H10Fe.[8][11]

Determining the structure

edit
 
Pauson and Kealy's original (incorrect) notion of ferrocene's molecular structure.[11]

Pauson and Kealy conjectured that the compound had two cyclopentadienyl groups, each with a single covalent bond from the saturated carbon atom to the iron atom.[7] However, that structure was inconsistent with then-existing bonding models and did not explain the unexpected stability of the compound, and chemists struggled to find the correct structure.[10][12]

The structure was deduced and reported independently by three groups in 1952.[13] Robert Burns Woodward, Geoffrey Wilkinson, et al. deduced observe that the compound was diamagnetic and nonpolar.[14] A few months later they described its reactions as being typical of aromatic compounds such as benzene.[15] The name ferrocene was coined by Mark Whiting, a postdoc with Woodward.[16]. Ernst Otto Fischer and Wolfgang Pfab also noted ferrocene's diamagneticity and high symmetry. They also synthesize nickelocene and cobaltocene and confirmed they had the same structure.[17] Fischer described the structure as Doppelkegelstruktur ("double-cone structure"), although the term "sandwich" came to be preferred by British and American chemists.[18] Philip Frank Eiland and Raymond Pepinsky confirmed the structure through X-ray crystallography and later by NMR spectroscopy.[10][19][20][21]

The "sandwich" structure of ferrocene was shockingly novel and led to intensive theoretical studies. Application of molecular orbital theory with the assumption of a Fe2+ centre between two cyclopentadienide anions C5H−5 resulted in the successful Dewar–Chatt–Duncanson model, allowing correct prediction of the geometry of the molecule as well as explaining its remarkable stability.[22][23]

Impact

edit

The discovery of ferrocene was considered so significant that Wilkinson and Fischer shared the 1973 Nobel Prize in Chemistry "for their pioneering work, performed independently, on the chemistry of the organometallic, called sandwich compounds".[24]

Structure and bonding

edit

Mössbauer spectroscopy indicates that the iron center in ferrocene should be assigned the +2 oxidation state. Each cyclopentadienyl (Cp) ring should then be allocated a single negative charge. Thus ferrocene could be described as iron(II) bis(cyclopentadienide), Fe2+[C5H−5]2.

Each ring has six π-electrons, which makes them aromatic according to Hückel's rule. These π-electrons are then shared with the metal via covalent bonding. Since Fe2+ has six d-electrons, the complex attains an 18-electron configuration, which accounts for its stability. In modern notation, this sandwich structural model of the ferrocene molecule is denoted as Fe(η5-C5H5)2, where η denotes hapticity, the number of atoms through which each ring binds.

The carbon–carbon bond distances around each five-membered ring are all 1.40 Å, and all Fe–C bond distances are 2.04 Å. From room temperature down to 164 K, X-ray crystallography yields the monoclinic space group; the cyclopentadienide rings are a staggered conformation, resulting in a centrosymmetric molecule, with symmetry group D5d.[19] However, below 110 K, ferrocene crystallizes in an orthorhombic crystal lattice in which the Cp rings are ordered and eclipsed, so that the molecule has symmetry group D5h.[25] In the gas phase, electron diffraction[26] and computational studies[27] show that the Cp rings are eclipsed. While ferrocene has no permanent dipole moment at room temperature, between 172.8 and 163.5 K the molecule exhibits an "incommensurate modulation", breaking the D5 symmetry and acquiring an electric dipole.[28]

The Cp rings rotate with a low barrier about the Cp(centroid)–Fe–Cp(centroid) axis, as observed by measurements on substituted derivatives of ferrocene using 1H and 13C nuclear magnetic resonance spectroscopy. For example, methylferrocene (CH3C5H4FeC5H5) exhibits a singlet for the C5H5 ring.[29]

In solution, and at room temperature, eclipsed D5h ferrocene was determined to dominate over the staggered D5d conformer, as suggested by both Fourier-transform infrared spectroscopy and DFT calculations.[30]

Synthesis

edit

Early methods

edit

The first reported syntheses of ferrocene were nearly simultaneous. Pauson and Kealy synthesised ferrocene using iron(III) chloride and cyclopentadienyl magnesium bromide.[11] A redox reaction produces iron(II) chloride. The formation of fulvalene, the intended outcome does not occur.[8]

 


 
The Miller et al.[9] approach to ferrocene

Another early synthesis of ferrocene was by Miller et al.,[9] who treated metallic iron with gaseous cyclopentadiene at elevated temperature.[31] An approach using iron pentacarbonyl was also reported.[32]

Fe(CO)5 + 2 C5H6 → Fe(C5H5)2 + 5 CO + H2

Via alkali cyclopentadienide

edit

More efficient preparative methods are generally a modification of the original transmetalation sequence using either commercially available sodium cyclopentadienide[33] or freshly cracked cyclopentadiene deprotonated with potassium hydroxide[34] and reacted with anhydrous iron(II) chloride in ethereal solvents.

Modern modifications of Pauson and Kealy's original Grignard approach are known:

  • Using sodium cyclopentadienide:       2 NaC5H5   +   FeCl2   →   Fe(C5H5)2   +   2 NaCl
  • Using freshly-cracked cyclopentadiene:     FeCl2·4H2O   +   2 C5H6   +   2 KOH   →   Fe(C5H5)2   +   2 KCl   +   6 H2O
  • Using an iron(II) salt with a Grignard reagent:     2 C5H5MgBr   +   FeCl2   →   Fe(C5H5)2   +   2 MgBrCl

Even some amine bases (such as diethylamine) can be used for the deprotonation, though the reaction proceeds more slowly than when using stronger bases:[33]

2 C5H6   +   2 (CH3CH2)2NH   +   FeCl2   →   Fe(C5H5)2   +   2 (CH3CH2)2NH2Cl

Direct transmetalation can also be used to prepare ferrocene from some other metallocenes, such as manganocene:[35]

FeCl2   +   Mn(C5H5)2   →   MnCl2   +   Fe(C5H5)2

Properties

edit
 
Crystals of ferrocene after purification by vacuum sublimation

Ferrocene is an air-stable orange solid with a camphor-like odor. As expected for a symmetric, uncharged species, ferrocene is soluble in normal organic solvents, such as benzene, but is insoluble in water. It is stable to temperatures as high as 400 °C.[36]

Ferrocene readily sublimes, especially upon heating in a vacuum. Its vapor pressure is about 1 Pa at 25 °C, 10 Pa at 50 °C, 100 Pa at 80 °C, 1000 Pa at 116 °C, and 10,000 Pa (nearly 0.1 atm) at 162 °C.[37][38]

Reactions

edit

With electrophiles

edit

Ferrocene undergoes many reactions characteristic of aromatic compounds, enabling the preparation of substituted derivatives. A common undergraduate experiment is the Friedel–Crafts reaction of ferrocene with acetic anhydride (or acetyl chloride) in the presence of phosphoric acid as a catalyst. Under conditions for a Mannich reaction, ferrocene gives N,N-dimethylaminomethylferrocene.

 
Important reactions of ferrocene with electrophiles and other reagents

Ferrocene can itself be oxidized to the ferrocenium cation (Fc+); the ferrocene/ferrocenium couple is often used as a reference in electrochemistry.[12]

It is an aromatic substance and undergoes substitution reactions rather than addition reactions on the cyclopentadienyl ligands. For example, Friedel-Crafts acylation of ferrocene with acetic anhydride yields acetylferrocene[39] just as acylation of benzene yields acetophenone under similar conditions. Vilsmeier-Haack reaction (formylation) using formylanilide and phosphorus oxychloride gives ferrocenecarboxaldehyde. Diformylation does not occur readily, showing the electronic communication between the two rings.[40]

Protonation of ferrocene allows isolation of [Cp2FeH]PF6.[41]

In the presence of aluminium chloride, Me2NPCl2 and ferrocene react to give ferrocenyl dichlorophosphine,[42] whereas treatment with phenyldichlorophosphine under similar conditions forms P,P-diferrocenyl-P-phenyl phosphine.[43]

Ferrocene reacts with P4S10 forms a diferrocenyl-dithiadiphosphetane disulfide.[44]

Lithiation

edit

Ferrocene reacts with butyllithium to give 1,1′-dilithioferrocene, which is a versatile nucleophile. In combination with butyllithiium, tert-butyllithium produces monolithioferrocene.[45]

Redox chemistry

edit

Ferrocene undergoes a one-electron oxidation at around 0.4 V versus a saturated calomel electrode (SCE), becoming ferrocenium. This reversible oxidation has been used as standard in electrochemistry as Fc+/Fc = 0.64 V versus the standard hydrogen electrode,[46] however other values have been reported.[47] Ferrocenium tetrafluoroborate is a common reagent.[48] The remarkably reversible oxidation-reduction behaviour has been extensively used to control electron-transfer processes in electrochemical[49][50] and photochemical[51][52] systems.

 
The one-electron oxidized derivative of biferrocene has attracted much research attention.

Substituents on the cyclopentadienyl ligands alters the redox potential in the expected way: electron-withdrawing groups such as a carboxylic acid shift the potential in the anodic direction (i.e. made more positive), whereas electron-releasing groups such as methyl groups shift the potential in the cathodic direction (more negative). Thus, decamethylferrocene is much more easily oxidised than ferrocene and can even be oxidised to the corresponding dication.[53] Ferrocene is often used as an internal standard for calibrating redox potentials in non-aqueous electrochemistry.

Stereochemistry of substituted ferrocenes

edit
 
A planar chiral ferrocene derivative

Disubstituted ferrocenes can exist as either 1,2-, 1,3- or 1,1′- isomers, none of which are interconvertible. Ferrocenes that are asymmetrically disubstituted on one ring are chiral – for example [CpFe(EtC5H3Me)]. This planar chirality arises despite no single atom being a stereogenic centre. The substituted ferrocene shown at right (a 4-(dimethylamino)pyridine derivative) has been shown to be effective when used for the kinetic resolution of racemic secondary alcohols.[54] Several approaches have been developed to asymmetrically 1,1′-functionalise the ferrocene.[55]

Applications of ferrocene and its derivatives

edit

Ferrocene and its numerous derivatives have no large-scale applications, but have many niche uses that exploit the unusual structure (ligand scaffolds, pharmaceutical candidates), robustness (anti-knock formulations, precursors to materials), and redox (reagents and redox standards).

Ligand scaffolds

edit

Chiral ferrocenyl phosphines are employed as ligands for transition-metal catalyzed reactions. Some of them have found industrial applications in the synthesis of pharmaceuticals and agrochemicals. For example, the diphosphine 1,1′-bis(diphenylphosphino)ferrocene (dppf) is a valued ligand for palladium-coupling reactions and Josiphos ligand is useful for hydrogenation catalysis.[56] They are named after the technician who made the first one, Josi Puleo.[57][58]

 
Josiphos ligand.[56]

Fuel additives

edit

Ferrocene and its derivatives are antiknock agents used in the fuel for petrol engines. They are safer than previously used tetraethyllead.[59] Petrol additive solutions containing ferrocene can be added to unleaded petrol to enable its use in vintage cars designed to run on leaded petrol.[60] The iron-containing deposits formed from ferrocene can form a conductive coating on spark plug surfaces. Ferrocene polyglycol copolymers, prepared by effecting a polycondensation reaction between a ferrocene derivative and a substituted dihydroxy alcohol, has promise as a component of rocket propellants. These copolymers provide rocket propellants with heat stability, serving as a propellant binder and controlling propellant burn rate.[61]

Ferrocene has been found to be effective at reducing smoke and sulfur trioxide produced when burning coal. The addition by any practical means, impregnating the coal or adding ferrocene to the combustion chamber, can significantly reduce the amount of these undesirable byproducts, even with a small amount of the metal cyclopentadienyl compound.[62]

Pharmaceuticals

edit
 
Ferrocerone

Ferrocene derivatives have been investigated as drugs,[63] with one compound ferrocerone [ru] approved for use in the USSR in the 1970s as an iron supplement, though it is no longer marketed today.[64] Only one drug has entered clinical trials in recent years, Ferroquine (7-chloro-N-(2-((dimethylamino)methyl)ferrocenyl)quinolin-4-amine), an antimalarial,[65][66][67] which has reached Phase IIb trials.[68] Ferrocene-containing polymer-based drug delivery systems have been investigated.[69]

 
Ferroquine

The anticancer activity of ferrocene derivatives was first investigated in the late 1970s, when derivatives bearing amine or amide groups were tested against lymphocytic leukemia.[70] Some ferrocenium salts exhibit anticancer activity, but no compound has seen evaluation in the clinic.[71] Ferrocene derivatives have strong inhibitory activity against human lung cancer cell line A549, colorectal cancer cell line HCT116, and breast cancer cell line MCF-7.[72] An experimental drug was reported which is a ferrocenyl version of tamoxifen.[73] The idea is that the tamoxifen will bind to the estrogen binding sites, resulting in cytotoxicity.[73][74]

Ferrocifens are exploited for cancer applications by a French biotech, Feroscan, founded by Pr. Gerard Jaouen.

Solid rocket propellant

edit

Ferrocene and related derivatives are used as powerful burn rate catalysts in ammonium perchlorate composite propellant.[75]

Derivatives and variations

edit

Ferrocene analogues can be prepared with variants of cyclopentadienyl. For example, bisindenyliron and bisfluorenyliron.[58]

 
Various ferrocene derivatives where cyclopentadienyl has been replaced by related ligands

Carbon atoms can be replaced by heteroatoms as illustrated by Fe(η5-C5Me5)(η5-P5) and Fe(η5-C5H5)(η5-C4H4N) ("azaferrocene"). Azaferrocene arises from decarbonylation of Fe(η5-C5H5)(CO)2(η1-pyrrole) in cyclohexane.[76] This compound on boiling under reflux in benzene is converted to ferrocene.[77]

Because of the ease of substitution, many structurally unusual ferrocene derivatives have been prepared. For example, the penta(ferrocenyl)cyclopentadienyl ligand,[78] features a cyclopentadienyl anion derivatized with five ferrocene substituents.

 
Penta(ferrocenyl)cyclopentadienyl ligand
 
Structure of hexaferrocenylbenzene

In hexaferrocenylbenzene, C6[(η5-C5H4)Fe(η5-C5H5)]6, all six positions on a benzene molecule have ferrocenyl substituents (R).[79] X-ray diffraction analysis of this compound confirms that the cyclopentadienyl ligands are not co-planar with the benzene core but have alternating dihedral angles of +30° and −80°. Due to steric crowding the ferrocenyls are slightly bent with angles of 177° and have elongated C-Fe bonds. The quaternary cyclopentadienyl carbon atoms are also pyramidalized. Also, the benzene core has a chair conformation with dihedral angles of 14° and displays bond length alternation between 142.7 pm and 141.1 pm, both indications of steric crowding of the substituents.

The synthesis of hexaferrocenylbenzene has been reported using Negishi coupling of hexaiodidobenzene and diferrocenylzinc, using tris(dibenzylideneacetone)dipalladium(0) as catalyst, in tetrahydrofuran:[79]

 

The yield is only 4%, which is further evidence consistent with substantial steric crowding around the arene core.

Materials chemistry

edit
 
Strands of an uncharged ferrocene-substituted polymer are tethered to a hydrophobic silica surface. Oxidation of the ferrocenyl groups produces a hydrophilic surface due to electrostatic attractions between the resulting charges and the polar solvent.[80]

Ferrocene, a precursor to iron nanoparticles, can be used as a catalyst for the production of carbon nanotubes.[81] Vinylferrocene can be converted to (polyvinylferrocene, PVFc), a ferrocenyl version of polystyrene (the phenyl groups are replaced with ferrocenyl groups). Another polyferrocene which can be formed is poly(2-(methacryloyloxy)ethyl ferrocenecarboxylate), PFcMA. In addition to using organic polymer backbones, these pendant ferrocene units have been attached to inorganic backbones such as polysiloxanes, polyphosphazenes, and polyphosphinoboranes, (–PH(R)–BH2–)n, and the resulting materials exhibit unusual physical and electronic properties relating to the ferrocene / ferrocinium redox couple.[80] Both PVFc and PFcMA have been tethered onto silica wafers and the wettability measured when the polymer chains are uncharged and when the ferrocene moieties are oxidised to produce positively charged groups. The contact angle with water on the PFcMA-coated wafers was 70° smaller following oxidation, while in the case of PVFc the decrease was 30°, and the switching of wettability is reversible. In the PFcMA case, the effect of lengthening the chains and hence introducing more ferrocene groups is significantly larger reductions in the contact angle upon oxidation.[80][82]

See also

edit

References

edit
  1. ^ International Union of Pure and Applied Chemistry (2014). Nomenclature of Organic Chemistry: IUPAC Recommendations and Preferred Names 2013. The Royal Society of Chemistry. p. 1041. doi:10.1039/9781849733069. ISBN 978-0-85404-182-4.
  2. ^ "Ferrocene (102-54-5)". ChemicalBook. Retrieved 3 February 2010.
  3. ^ "FERROCENE Material safety data sheet". ChemSrc.
  4. ^ Lide DR, ed. (2005). CRC Handbook of Chemistry and Physics (86th ed.). Boca Raton, Florida: CRC Press. p. 3.258. ISBN 0-8493-0486-5.
  5. ^ a b c NIOSH Pocket Guide to Chemical Hazards. "#0205". National Institute for Occupational Safety and Health (NIOSH).
  6. ^ "Ferrocene MSDS". ScienceLab. Archived from the original on 2015-12-12. Retrieved 2015-11-25.
  7. ^ a b c d e Werner H (June 2012). "At least 60 years of ferrocene: the discovery and rediscovery of the sandwich complexes". Angewandte Chemie. 51 (25): 6052–6058. doi:10.1002/anie.201201598. PMID 22573490.
  8. ^ a b c d Pauson PL (2001). "Ferrocene—how it all began". Journal of Organometallic Chemistry. 637–639: 3–6. doi:10.1016/S0022-328X(01)01126-3.
  9. ^ a b c Miller SA, Tebboth JA, Tremaine JF (1952). "114. Dicyclopentadienyliron". J. Chem. Soc.: 632–635. doi:10.1039/JR9520000632.
  10. ^ a b c Laszlo P, Hoffmann R (January 2000). "Ferrocene: Ironclad History or Rashomon Tale?". Angewandte Chemie. 39 (1): 123–124. doi:10.1002/(SICI)1521-3773(20000103)39:1<123::AID-ANIE123>3.0.CO;2-Z. PMID 10649350.
  11. ^ a b c Kealy TJ, Pauson PL (1951). "A New Type of Organo-Iron Compound". Nature. 168 (4285): 1039–1040. Bibcode:1951Natur.168.1039K. doi:10.1038/1681039b0. S2CID 4181383.
  12. ^ a b Federman Neto A, Pelegrino AC, Darin VA (2004). "Ferrocene: 50 Years of Transition Metal Organometallic Chemistry — From Organic and Inorganic to Supramolecular Chemistry (Abstract)". Trends in Organometallic Chemistry. 4. Research Trends: 147–169.
  13. ^ Werner H (2008). Landmarks in Organo-Transition Metal Chemistry: A Personal View. New York: Springer Science. pp. 161–63. ISBN 978-0-387-09847-0.
  14. ^ Wilkinson G, Rosenblum M, Whiting MC, Woodward RB (1952-03-24). "The structure of iron bis-cyclopentadienyl". J. Am. Chem. Soc. 74 (8): 2125–2126. doi:10.1021/ja01128a527.{{cite journal}}: CS1 maint: year (link)
  15. ^ Woodward, R. B.; Rosenblum, M.; Whiting, M. C. (1952-06-02). "A NEW AROMATIC SYSTEM". Journal of the American Chemical Society. 74 (13): 3458–3459. doi:10.1021/ja01133a543. ISSN 0002-7863.
  16. ^ Sutton, Mike (2023-09-27). "Fifty years since the ferrocene furore". Chemistry World. Retrieved 2024-11-02.
  17. ^ Fischer EO, Pfab W (1952). "Zur Kristallstruktur der Di-Cyclopentadienyl-Verbindungen des zweiwertigen Eisens, Kobalts und Nickels" [On the crystal structure of the bis-cyclopentadienyl compounds of divalent iron, cobalt and nickel]. Zeitschrift für Naturforschung B. 7 (7): 377–379. doi:10.1515/znb-1952-0701.
  18. ^ Okuda J (2016-12-28). "Ferrocene - 65 Years After". European Journal of Inorganic Chemistry. 2017 (2): 217–219. doi:10.1002/ejic.201601323. ISSN 1434-1948.
  19. ^ a b Eiland PF, Pepinsky R (1952). "X-ray Examination of Iron Biscyclopentadienyl". J. Am. Chem. Soc. 74 (19): 4971. doi:10.1021/ja01139a527.
  20. ^ Dunitz JD, Orgel LE (1953). "Bis-Cyclopentadienyl – A Molecular Sandwich". Nature. 171 (4342): 121–122. Bibcode:1953Natur.171..121D. doi:10.1038/171121a0. S2CID 4263761.
  21. ^ Dunitz JD, Orgel L, Rich A (1956). "The crystal structure of ferrocene". Acta Crystallogr. 9 (4): 373–375. doi:10.1107/S0365110X56001091.
  22. ^ Mingos DM (2001). "A Historical Perspective on Dewar's Landmark Contribution to Organometallic Chemistry". J. Organomet. Chem. 635 (1–2): 1–8. doi:10.1016/S0022-328X(01)01155-X.
  23. ^ Mehrotra RC, Singh A (2007). Organometallic Chemistry: A Unified Approach (2nd ed.). New Delhi: New Age International. pp. 261–67. ISBN 978-81-224-1258-1.
  24. ^ "The Nobel Prize in Chemistry 1973". Nobel Foundation. Retrieved 12 September 2010.
  25. ^ Seiler P, Dunitz JD (1982). "Low-temperature crystallization of orthorhombic ferrocene: structure analysis at 98 K". Acta Crystallographica Section B. 38 (6): 1741–1745. doi:10.1107/s0567740882007080. ISSN 0567-7408.
  26. ^ Haaland A, Nilsson JE (1968). "The Determination of Barriers to Internal Rotation by Means of Electron Diffraction. Ferrocene and Ruthenocene". Acta Chem. Scand. 22: 2653–2670. doi:10.3891/acta.chem.scand.22-2653.
  27. ^ Coriani S, Haaland A, Helgaker T, Jørgensen P (January 2006). "The equilibrium structure of ferrocene". ChemPhysChem. 7 (1): 245–249. doi:10.1002/cphc.200500339. PMID 16404766.
  28. ^ Katrusiak, Andrzej; Rusek, Michalina; Dušek, Michal; Petříček, Václav; Szafrański, Marek (2023-04-06). "Dipole-Moment Modulation in New Incommensurate Ferrocene". The Journal of Physical Chemistry Letters. 14 (13): 3111–3119. doi:10.1021/acs.jpclett.3c00215. ISSN 1948-7185. PMC 10084461. PMID 36951481.
  29. ^ Abel EW, Long NJ, Orrell KG, Osborne AG, Šik V (1991). "Dynamic NMR studies of ring rotation in substituted ferrocenes and ruthenocenes". J. Org. Chem. 403 (1–2): 195–208. doi:10.1016/0022-328X(91)83100-I.
  30. ^ Wang, Feng; Mohammadi, Narges; Best, Stephen P.; Appadoo, Dominique; Chantler, Christopher T. (2021). "Dominance of eclipsed ferrocene conformer in solutions revealed by the IR spectra between 400 and 500 cm-1". Radiation Physics and Chemistry. 188: 109590. Bibcode:2021RaPC..18809590W. doi:10.1016/j.radphyschem.2021.109590.
  31. ^ Wilkinson G, Pauson PL, Cotton FA (1954). "Bis-cyclopentadienyl Compounds of Nickel and Cobalt". J. Am. Chem. Soc. 76 (7): 1970–1974. doi:10.1021/ja01636a080.
  32. ^ Wilkinson G, Cotton FA (1959). "Cyclopentadienyl and Arene Metal Compounds". Progress in Inorganic Chemistry. Vol. 1. pp. 1–124. doi:10.1002/9780470166024.ch1. ISBN 978-0-470-16602-4.
  33. ^ a b Wilkinson G (1956). "Ferrocene". Organic Syntheses. 36: 31. doi:10.15227/orgsyn.036.0031.
  34. ^ Jolly WL (1970). The Synthesis and Characterization of Inorganic Compounds. New Jersey: Prentice-Hall. ISBN 9780138799328.
  35. ^ Wilkinson G, Cotton FA, Birmingham JM (1956). "On manganese cyclopentadienide and some chemical reactions of neutral bis-cyclopentadienyl metal compounds". J. Inorg. Nucl. Chem. 2 (2): 95–113. doi:10.1016/0022-1902(56)80004-3.
  36. ^ Solomons G, Craig F (2006). Organic Chemistry (9th ed.). USA: John Wiley & Sons.
  37. ^ Monte MJ, Santos LM, Fulem M, Fonseca JM, Sousa CA (2006). "New Static Apparatus and Vapor Pressure of Reference Materials: Naphthalene, Benzoic Acid, Benzophenone, and Ferrocene". Journal of Chemical & Engineering Data. 51 (2): 757. doi:10.1021/je050502y.
  38. ^ Fulem M, Růžička K, Červinka C, Rocha MA, Santos LM, Berg RF (2013). "Recommended vapor pressure and thermophysical data for ferrocene". Journal of Chemical Thermodynamics. 57: 530–540. doi:10.1016/j.jct.2012.07.023.
  39. ^ Bozak RE (1966). "Acetylation of Ferrocene: A Chromatography Experiment for Elementary Organic Laboratory". J. Chem. Educ. 43 (2): 73. Bibcode:1966JChEd..43...73B. doi:10.1021/ed043p73.
  40. ^ Rausch, M. D. (1963). "Metallocene Chemistry—A Decade of Progress". Canadian Journal of Chemistry. 41 (5): 1289–1314. doi:10.1139/v63-182.
  41. ^ Malischewski M, Seppelt K, Sutter J, Heinemann FW, Dittrich B, Meyer K (October 2017). "Protonation of Ferrocene: A Low-Temperature X-ray Diffraction Study of [Cp2 FeH](PF6 ) Reveals an Iron-Bound Hydrido Ligand". Angewandte Chemie. 56 (43): 13372–13376. doi:10.1002/anie.201704854. PMID 28834022.
  42. ^ Knox GR, Pauson PL, Willison D (1992). "Ferrocene derivatives. 27. Ferrocenyldimethylphosphine". Organometallics. 11 (8): 2930–2933. doi:10.1021/om00044a038.
  43. ^ Sollott GP, Mertwoy HE, Portnoy S, Snead JL (1963). "Unsymmetrical Tertiary Phosphines of Ferrocene by Friedel–Crafts Reactions. I. Ferrocenylphenylphosphines". J. Org. Chem. 28 (4): 1090–1092. doi:10.1021/jo01039a055.
  44. ^ St J Foreman MR, Alexandra MZ, Slawin AM, Woollins JD (1996). "2,4-Diferrocenyl-1,3-dithiadiphosphetane 2,4-disulfide; structure and reactions with catechols and [PtCl2(PR3)2](R = Et or Bun)". J. Chem. Soc., Dalton Trans. (18): 3653–3657. doi:10.1039/DT9960003653.
  45. ^ Busacca, Carl A.; Eriksson, Magnus C.; Haddad, Nizar; Han, Z. Steve; Lorenz, Jon C.; Qu, Bo; Zeng, Xingzhong; Senanayake, Chris H. (2013). "Practical Synthesis of Di-tert-Butyl-Phosphinoferrocene". Organic Syntheses. 90: 316. doi:10.15227/orgsyn.090.0316.
  46. ^ Cardona CM, Li W, Kaifer AE, Stockdale D, Bazan GC (May 2011). "Electrochemical considerations for determining absolute frontier orbital energy levels of conjugated polymers for solar cell applications". Advanced Materials. 23 (20): 2367–2371. Bibcode:2011AdM....23.2367C. doi:10.1002/adma.201004554. PMID 21462372. S2CID 40766788.
  47. ^ Vitaly V Pavlishchuk, Anthony W Addison (January 2000), "Conversion constants for redox potentials measured versus different reference electrodes in acetonitrile solutions at 25°C", Inorganica Chimica Acta (in German), vol. 298, no. 1, pp. 97–102, doi:10.1016/S0020-1693(99)00407-7, retrieved 2022-07-26
  48. ^ Connelly NG, Geiger WE (March 1996). "Chemical Redox Agents for Organometallic Chemistry". Chemical Reviews. 96 (2): 877–910. doi:10.1021/cr940053x. PMID 11848774.
  49. ^ Sirbu D, Turta C, Gibson EA, Benniston AC (September 2015). "The ferrocene effect: enhanced electrocatalytic hydrogen production using meso-tetraferrocenyl porphyrin palladium(II) and copper(II) complexes". Dalton Transactions. 44 (33): 14646–14655. doi:10.1039/C5DT02191J. PMID 26213204.
  50. ^ Lennox AJ, Nutting JE, Stahl SS (January 2018). "Selective electrochemical generation of benzylic radicals enabled by ferrocene-based electron-transfer mediators". Chemical Science. 9 (2): 356–361. doi:10.1039/C7SC04032F. PMC 5909123. PMID 29732109.
  51. ^ Dannenberg JJ, Richards JH (1965-04-01). "Photosensitization by Ferrocene. Photochemistry of Higher Electronic Excited States". Journal of the American Chemical Society. 87 (7): 1626–1627. doi:10.1021/ja01085a048. ISSN 0002-7863.
  52. ^ Sirbu D, Turta C, Benniston AC, Abou-Chahine F, Lemmetyinen H, Tkachenko NV, et al. (2014-05-23). "Synthesis and properties of a meso- tris–ferrocene appended zinc(II) porphyrin and a critical evaluation of its dye sensitised solar cell (DSSC) performance". RSC Advances. 4 (43): 22733–22742. Bibcode:2014RSCAd...422733S. doi:10.1039/C4RA03105A. ISSN 2046-2069.
  53. ^ Malischewski M, Adelhardt M, Sutter J, Meyer K, Seppelt K (August 2016). "Isolation and structural and electronic characterization of salts of the decamethylferrocene dication". Science. 353 (6300): 678–682. Bibcode:2016Sci...353..678M. doi:10.1126/science.aaf6362. PMID 27516596. S2CID 43385610.
  54. ^ Ruble JC, Latham HA, Fu GC (1997). "Effective Kinetic Resolution of Secondary Alcohols with a Planar-Chiral Analogue of 4-(dimethylamino)pyridine. Use of the Fe(C5Ph5) Group in Asymmetric Catalysis". J. Am. Chem. Soc. 119 (6): 1492–1493. doi:10.1021/ja963835b.
  55. ^ Atkinson RC, Gibson VC, Long NJ (June 2004). "The syntheses and catalytic applications of unsymmetrical ferrocene ligands". Chemical Society Reviews. 33 (5): 313–328. doi:10.1039/B316819K. PMID 15272371.
  56. ^ a b Blaser HU (2002). "Solvias Josiphos ligands: From discovery to technical applications". Topics in Catalysis. 19: 3–16. doi:10.1023/a:1013832630565. S2CID 95738043.
  57. ^ Zhou QL (2011). Privileged Chiral Ligands and Catalysts. Weinheim: Wiley-VCH Verlag. ISBN 978-3-527-63521-4.
  58. ^ a b Stepnicka P (2008). Ferrocenes: Ligands, Materials and Biomolecules. Hoboken, NJ: J. Wiley. ISBN 978-0-470-03585-6.
  59. ^ Bennett J (26 November 2004). Application of fuel additives (PDF). International Conference on Automotive Technology. Istanbul. Archived from the original (PDF) on 2006-05-05.
  60. ^ US 4104036, Chao TS, "Iron-containing motor fuel compositions and method for using same", published 1978-08-01, assigned to Atlantic Richfield Co 
  61. ^ US 3598850, Dewey FM, "Ferrocene Polyglycols", issued Aug. 10, 1971, assigned to U.S. Air Force. 
  62. ^ US 3927992, Kerley RV, "Coal Combustion Process and Composition", issued December 23, 1975, assigned to Ethyl Corporation. 
  63. ^ van Staveren DR, Metzler-Nolte N (December 2004). "Bioorganometallic chemistry of ferrocene". Chemical Reviews. 104 (12): 5931–5985. doi:10.1021/cr0101510. PMID 15584693.
  64. ^ Ong YC, Gasser G (December 2020). "Organometallic compounds in drug discovery: Past, present and future" (PDF). Drug Discovery Today: Technologies. 37: 117–124. doi:10.1016/j.ddtec.2019.06.001. PMID 34895650. S2CID 198268304.
  65. ^ Biot C, Nosten F, Fraisse L, Ter-Minassian D, Khalife J, Dive D (August 2011). "The antimalarial ferroquine: from bench to clinic". Parasite. 18 (3): 207–214. doi:10.1051/parasite/2011183207. PMC 3671469. PMID 21894260.  
  66. ^ Roux C, Biot C (April 2012). "Ferrocene-based antimalarials". Future Medicinal Chemistry. 4 (6): 783–797. doi:10.4155/fmc.12.26. PMID 22530641.
  67. ^ Wani WA, Jameel E, Baig U, Mumtazuddin S, Hun LT (August 2015). "Ferroquine and its derivatives: new generation of antimalarial agents". European Journal of Medicinal Chemistry. 101: 534–551. doi:10.1016/j.ejmech.2015.07.009. PMC 7115395. PMID 26188909.
  68. ^ Adoke Y, Zoleko-Manego R, Ouoba S, Tiono AB, Kaguthi G, Bonzela JE, et al. (May 2021). "A randomized, double-blind, phase 2b study to investigate the efficacy, safety, tolerability and pharmacokinetics of a single-dose regimen of ferroquine with artefenomel in adults and children with uncomplicated Plasmodium falciparum malaria". Malaria Journal. 20 (1): 222. doi:10.1186/s12936-021-03749-4. PMC 8135182. PMID 34011358.
  69. ^ Gu H, Mu S, Qiu G, Liu X, Zhang L, Yuan Y, Astruc D (June 2018). "Redox-stimuli-responsive drug delivery systems with supramolecular ferrocenyl-containing polymers for controlled release". Coordination Chemistry Reviews. 364: 51–85. doi:10.1016/j.ccr.2018.03.013. ISSN 0010-8545. S2CID 103022297.
  70. ^ Ornelas C (2011). "Application of ferrocene and its derivatives in cancer research". New Journal of Chemistry. 35 (10): 1973. doi:10.1039/c1nj20172g. S2CID 56521492.
  71. ^ Babin VN, Belousov YA, Borisov VI, Gumenyuk VV, Nekrasov YS, Ostrovskaya LA, et al. (2014). "Ferrocenes as potential anticancer drugs. Facts and hypotheses". Russ. Chem. Bull. 63 (11): 2405–2422. doi:10.1007/s11172-014-0756-7. S2CID 94618726.
  72. ^ US 9738673, Yong J, Lu C, "Ferrocene Derivative, Preparation Method and Use Thereof.", issued August 22, 2017, assigned to Xiamen Institute of Rare Earth Materials. 
  73. ^ a b Top S, Vessières A, Leclercq G, Quivy J, Tang J, Vaissermann J, et al. (November 2003). "Synthesis, biochemical properties and molecular modelling studies of organometallic specific estrogen receptor modulators (SERMs), the ferrocifens and hydroxyferrocifens: evidence for an antiproliferative effect of hydroxyferrocifens on both hormone-dependent and hormone-independent breast cancer cell lines". Chemistry: A European Journal. 9 (21): 5223–5236. doi:10.1002/chem.200305024. PMID 14613131.
  74. ^ Dagani R (16 September 2002). "The Bio Side of Organometallics". Chemical and Engineering News. 80 (37): 23–29. doi:10.1021/cen-v080n037.p023.
  75. ^ "Ferrocene Burn Rate Catalyst". www.rocketmotorparts.com. Retrieved 2020-01-13.
  76. ^ Zakrzewski J, Giannotti C (1990). "An improved photochemical synthesis of azaferrocene". J. Organomet. Chem. 388 (1–2): 175–179. doi:10.1016/0022-328X(90)85359-7.
  77. ^ Efraty A, Jubran N, Goldman A (1982). "Chemistry of some η5-pyrrolyl- and η1-N-pyrrolyliron complexes". Inorg. Chem. 21 (3): 868–873. doi:10.1021/ic00133a006.
  78. ^ Yu Y, Bond AD, Leonard PW, Vollhardt KP, Whitener GD (March 2006). "Syntheses, structures, and reactivity of radial oligocyclopentadienyl metal complexes: penta(ferrocenyl)cyclopentadienyl and congeners". Angewandte Chemie. 45 (11): 1794–1799. doi:10.1002/anie.200504047. PMID 16470902.
  79. ^ a b Yu Y, Bond AD, Leonard PW, Lorenz UJ, Timofeeva TV, Vollhardt KP, et al. (June 2006). "Hexaferrocenylbenzene". Chemical Communications (24): 2572–2574. doi:10.1039/b604844g. PMID 16779481.
  80. ^ a b c Pietschnig R (October 2016). "Polymers with pendant ferrocenes". Chemical Society Reviews. 45 (19): 5216–5231. doi:10.1039/C6CS00196C. PMID 27156979.
  81. ^ Conroy D, Moisala A, Cardoso S, Windle A, Davidson J (2010). "Carbon nanotube reactor: Ferrocene decomposition, iron particle growth, nanotube aggregation and scale-up". Chem. Eng. Sci. 65 (10): 2965–2977. doi:10.1016/j.ces.2010.01.019.
  82. ^ Elbert J, Gallei M, Rüttiger C, Brunsen A, Didzoleit H, Stühn B, Rehahn M (2013). "Ferrocene Polymers for Switchable Surface Wettability". Organometallics. 32 (20): 5873–5878. doi:10.1021/om400468p.
edit
 
Wikimedia Commons has media related to Ferrocene.
Retrieved from "https://en.wikipedia.org/w/index.php?title=Ferrocene&oldid=1254994547"