This article needs additional citations for verification. (October 2007) |
A grid-tied electrical system, also called tied to grid or grid tie system, is a semi-autonomous electrical generation or grid energy storage system which links to the mains to feed excess capacity back to the local mains electrical grid. When insufficient electricity is available, electricity drawn from the mains grid can make up the shortfall. Conversely when excess electricity is available, it is sent to the main grid. When the Utility or network operator restricts the amount of energy that goes into the grid, it is possible to prevent any input into the grid by installing Export Limiting devices.
When batteries are used for storage, the system is called battery-to-grid (B2G), which includes vehicle-to-grid (V2G).
How it works
edit
Direct Current (DC) electricity from sources such as hydro, wind or solar is passed to an inverter which is grid tied. The inverter monitors the alternating current mains supply frequency and generates electricity that is phase matched to the mains. When the grid fails to accept power during a "black out", most inverters can continue to provide courtesy power.
Battery-to-grid
editA key concept of this system is the possibility of creating an electrical micro-system that is not dependent on the grid-tie to provide a high level quality of service. If the mains supply of the region is unreliable, the local generation system can be used to power important equipment.
Battery-to-grid can also spare the use of fossil fuel power plants to supply energy during peak loads on the public electric grid. Regions that charge based on time of use metering may benefit by using stored battery power during prime time.
Environmentally friendly
editLocal generation can be from an environmentally friendly source such as pico hydro, solar panels or a wind turbine. Individuals can choose to install their own system if an environmentally friendly mains provider is not available in their location.
Small scale start
editA micro generation facility can be started with a very small system such as a home wind power generation, photovoltaic (solar cells) generation, or micro combined heat and power (Micro-CHP)[1] system.
Sell to and buy from mains
edit- Excess electricity can be sold to mains.
- Electrical shortfall can be bought from mains.
List of countries or regions that legally allow grid-tied electrical systems
edit- Armenia
- Australia
- Bangladesh
- Bosnia and Herzegovina
- Brazil
- Canada
- Chile
- Dominican Republic
- El Salvador[2]
- European Union[3]
- Guatemala
- India
- Iran
- Israel[4]
- Japan
- Jordan
- Mexico[5][6]
- New Zealand
- Pakistan
- Panama
- Philippines (via Meralco)
- Russia (from Dec 2019)
- Singapore[7]
- South Africa (Only by arrangement with municipality)
- Sri Lanka
- United States of America
- Venezuela (no legal restrictions)
See also
edit
References
edit- ^ Du, Ruoyang; Robertson, Paul (2017). "Cost Effective Grid-Connected Inverter for a Micro Combined Heat and Power System". IEEE Transactions on Industrial Electronics. 64 (7): 5360. doi:10.1109/TIE.2017.2677340. ISSN 0278-0046. S2CID 1042325.
- ^ "Normativa para Usuarios Finales Productores de Energía"
- ^ "Directive 2001/77/EC"
- ^ "Public Utility Authority" Photo-voltaic guidelines
- ^ "Official Newspaper of the Federation of Mexico" Contract of Interconnection of Photovoltaic Systems updated 27 June 2007 (in Spanish)
- ^ "Federal Commission of Electricity" Renewable Energy guidelines Archived 2010-09-14 at the Wayback Machine updated 3 September 2010 (in Spanish)
- ^ "Energy Market Authority of Singapore": "Handbook for Photo-voltaic (PV) Systems" Archived 2007-10-25 at the Wayback Machine updated 10 September 2007
External links
edit- Motavalli, Jim (September 2, 2007). "Power to the People: Run Your House on a Prius". New York Times. Retrieved 2007-09-02.
- Grid Tied Solar explained