Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Jump to content

English Electric KDF9

Add links
From Wikipedia, the free encyclopedia

English Electric KDF9
DeveloperEnglish Electric
ManufacturerEnglish Electric
Generation2
Release date1964; 60 years ago (1964)
Units shipped29
Operating systemTimesharing Director, Eldon 2, EGDON, COTAN
CPUTransformer-coupled diode–transistor logic, built from germanium diodes, about 20,000 transistors, and about 2,000 toroid pulse transformers) @ 1 MHz
Memory32K words of 48-bit core storage (192K bytes)
Mass5.2 short tons (4.7 t)

KDF9 was an early British 48-bit computer designed and built by English Electric (which in 1968 was merged into International Computers Limited (ICL)). The first machine came into service in 1964 and the last of 29 machines was decommissioned in 1980 at the National Physical Laboratory. The KDF9 was designed for, and used almost entirely in, the mathematical and scientific processing fields – in 1967, nine were in use in UK universities and technical colleges.[1] The KDF8, developed in parallel, was aimed at commercial processing workloads.

The KDF9 was an early example of a machine that directly supported multiprogramming, using offsets into its core memory to separate the programs into distinct virtual address spaces. Several operating systems were developed for the platform, including some that provided fully interactive use through PDP-8 machines acting as smart terminal servers. A number of compilers were available, notably both checkout and globally optimizing compilers for Algol 60.

Architecture

[edit]

The logic circuits of the KDF9 were entirely solid-state. The KDF9 used transformer-coupled diode–transistor logic, built from germanium diodes, about 20,000 transistors, and about 2,000 toroid pulse transformers.[2] They ran on a 1 MHz clock that delivered two pulses of 250 ns separated by 500 ns, in each clock cycle. The maximum configuration incorporated 32K words of 48-bit core storage (192K bytes) with a cycle time of 6 microseconds. Each word could hold a single 48-bit integer or floating-point number, two 24-bit integer or floating-point numbers, six 8-bit instruction syllables, or eight 6-bit characters.[3] There was also provision for efficient handling of double-word (96-bit) numbers in both integer and floating-point formats. However, there was no facility for byte or character addressing, so that non-numerical work suffered by comparison. Its standard character set was a version of the Friden Flexowriter paper tape code that was oriented to Algol 60, and included unusual characters such as the Algol subscript 10. However, each other I/O device type implemented its own subset of that. Not every character that could be read from paper tape could be successfully printed, for example.

Registers

[edit]

The CPU architecture featured three register sets. The Nest was a 16-deep pushdown stack of arithmetic registers, The SJNS (Subroutine Jump Nesting Store) was a similar stack of return addresses. The Q Store was a set of 16 index registers, each of 48 bits divided into Counter (C), Increment (I) and Modifier (M) parts of 16 bits each. Flags on a memory-reference instruction specified whether the address should be modified by the M part of a Q Store, and, if so, whether the C part should be decremented by 1 and the M part incremented by the contents of the I part. This made the coding of counting loops very efficient. Three additional Nest levels and one additional SJNS level were reserved to Director, the Operating System, allowing short-path interrupts to be handled without explicit register saving and restoring. As a result, the interrupt overhead was only three clock cycles.

Instruction set

[edit]

Instructions were of one, two, or three syllables. Although the word 'byte' had been coined by the designers of the IBM 7030 Stretch for a group of eight bits, it was not yet well known, and English Electric used the word 'syllable' for what is now called a byte. Most arithmetic took place at the top of the Nest and used zero-address, one-syllable instructions, although address arithmetic and index updating were handled separately in the Q store. Q Store handling, and some memory reference instructions used two syllables. Memory reference instructions with a 16-bit address offset, most jump instructions, and 16-bit literal load instructions, all used 3 syllables.

Dense instruction coding, and intensive use of the register sets, meant that relatively few store accesses were needed for common scientific codes, such as scalar product and polynomial inner loops. This did much to offset the relatively slow core cycle time, giving the KDF9 about a third of the speed of its much more famous, but 8 times more expensive and much less commercially successful contemporary, the Manchester/Ferranti Atlas Computer.

Multiprogramming (timesharing)

[edit]

The KDF9 was one of the earliest fully hardware-secured multiprogramming systems. Up to four programs could be run at once under the control of its elegantly simple operating system, the Timesharing Director, each being confined to its own core area by BA (Base Address) and NOL (Number of Locations) registers. Each program had its own sets of stack and Q store registers, which were activated when that program was dispatched, so that context switching was very efficient.

Each program could drive hardware I/O devices directly, but was limited by hardware checks to those that the Director had allocated to it. Any attempt to use an unallocated device caused an error interrupt. A similar interrupt resulted from overfilling (or over-emptying) the Nest or SJNS, or attempting to access storage at an address above that given in the NOL register. Somewhat different was the Lock-Out interrupt, which resulted from trying to access an area of store that was currently being used by an I/O device, so that there was hardware mutual exclusion of access to DMA buffers. When a program blocked on a Lock-Out, or by voluntarily waiting for an I/O transfer to terminate, it was interrupted and Director switched to the program of highest priority that was not itself blocked. When a Lock-Out cleared, or an awaited transfer terminated, and the responsible program was of higher priority than the program currently running, the I/O Control (IOC) unit interrupted to allow an immediate context switch. IOC also made provision to avoid priority inversion, in which a program of high priority waits for a device made busy by a program of lower priority, requesting a distinct interrupt in that case.

Later operating systems, including Eldon 2[4] at the University of Leeds, and COTAN, developed by UKAEA Culham Laboratories with the collaboration of Glasgow University, were fully interactive multi-access systems, with PDP-8 front ends to handle the terminals.

The Kidsgrove and Whetstone Algol 60 compilers were among the first of their class. The Kidsgrove compiler stressed optimization; the Whetstone compiler produced an interpretive object code aimed at debugging. It was by instrumenting the latter that Brian Wichmann obtained the statistics on program behaviour that led to the Whetstone benchmark for scientific computation,[5] which inspired in turn the Dhrystone benchmark for non-numerical workloads.[6]

Reminiscence

[edit]

Machine code orders were written in a form of octal officially named syllabic octal[7] (also known as 'slob-octal' or 'slob' notation,[8][9]). It represented 8 bits with three octal digits but the first digit represented only the two most-significant bits, whilst the others the remaining two groups of three bits each.

Within English Electric, its predecessor, DEUCE, had a well-used matrix scheme based on GIP (General Interpretive Programme). The unreliability of valve machines led to the inclusion of a sum-check mechanism to detect errors in matrix operations.[nb 1] The scheme used block floating-point using fixed-point arithmetic hardware, in which the sum-checks were precise. However, when the corresponding scheme was implemented on KDF9, it used floating point, a new concept that had only limited mathematical analysis. It quickly became clear that sum checks were no longer precise and a project was established in an attempt to provide a usable check. (In floating point (A + B) + C is not necessarily the same as A + (B + C) i.e. the + operation is not associative.) Before long, however, it was recognized that error rates with transistor machines was not an issue; they either worked correctly or did not work at all. Consequently, the idea of sum checks was abandoned. The initial matrix package proved a very useful system testing tool as it was able to generate lengthy performance checks well before more formal test packages which were subsequently developed.

There is a legend that the KDF9 was developed as project KD9 (Kidsgrove Development 9) and that the 'F' in its designation was contributed by the then chairman after a long and tedious discussion on what to name the machine at launch—"I don’t care if you call it the F—". The truth is more mundane: the name was chosen essentially at random by a marketing manager.[10] (See also KDF8 for the parallel development and use of a commercially oriented computer.)

The EGDON operating system was so named because one was going to UKAEA Winfrith: in Thomas Hardy's book The Return of the Native Winfrith Heath is called Egdon Heath. EGDON Fortran was called EGTRAN.[10] Eldon was so named because Leeds University's computer was located in a converted Eldon chapel.

Physical

[edit]

The machine weighed more than 10,300 pounds (5.2 short tons; 4.7 t). Control desk with interruption typewriter 300 lb (136 kg), main store and input/output control unit 3,500 (1,587 kg), arithmetic and main control unit 3,500 (1,587 kg), power supply unit 3,000 (1,360 kg).[11]

Notes

[edit]
  1. ^ The sum check equally well guarded against programming errors, in the event that some or all of a matrix was inadvertently overwritten.

References

[edit]
  1. ^ Roberts, Goronwy (1967-03-06). "Computers". Parliamentary Debates (Hansard). HC. Retrieved 2017-07-08.
  2. ^ "The KDF9 Computer - 30 Years On"
  3. ^ English Electric KDF9: Very high speed data processing system for Commerce, Industry, Science (PDF) (Product flyer). English Electric. c. 1961. Publication No. DP/103. 096320WP/RP0961. Archived (PDF) from the original on 2020-07-27. Retrieved 2020-07-27.
  4. ^ David Holdsworth (Winter 2009–10). "KDF9 Time Sharing: Eldon 2 is not EGDON!". Computer RESURRECTION – issue 49. Computer Conservation Society. Retrieved 2010-10-03.
  5. ^ Curnow, H. J. and Wichman, B. A. "A Synthetic Benchmark" Computer Journal, Volume 19, Issue 1, February 1976., pp. 43–49.
  6. ^ Weiss, Alan. "Dhrystone Benchmark: History, Analysis, "Scores" and Recommendations" (PDF).
  7. ^ Director - Manual (PDF) (Flowchart). English Electric. c. 1960s. Archived (PDF) from the original on 2020-07-27. Retrieved 2020-07-27. (NB. Mentions the term "syllabic octal".)
  8. ^ Beard, Bob (Autumn 1997) [1996-10-01]. "The KDF9 Computer — 30 Years On" (PDF). Resurrection - The Bulletin of the Computer Conservation Society. No. 18. Computer Conservation Society (CCS). pp. 7–15 [9, 11]. ISSN 0958-7403. Archived (PDF) from the original on 2020-07-27. Retrieved 2020-07-27. [1] (NB. This is an edited version of a talk given to North West Group of the Society at the Museum of Science and Industry, Manchester, UK on 1996-10-01. It mentions the term "slob" and "slob-octal" as equivalent to "syllabic octal".)
  9. ^ "Architecture of the English Electric KDF9 computer" (PDF). Version 1. Computer Conservation Society (CCS). September 2009. CCS-N4X2. Archived (PDF) from the original on 2020-04-04. Retrieved 2020-07-27. (NB. Refers to Beard's 1997 article.)
  10. ^ a b "(re)Introducing the KDF9". www.findlayw.plus.com. Retrieved 2020-12-27.
  11. ^ "English Electric | Selling the Computer Revolution | Computer History Museum". www.computerhistory.org. p. 27.
[edit]
Retrieved from "https://en.wikipedia.org/w/index.php?title=English_Electric_KDF9&oldid=1250824523"