Bombas de vaco de anillo lquido

para montaje sobre bancada

Liquid ring vacuum pumps

Base plate version
VU / VH / VZ
Bombas de vaco de anillo lquido Liquid ring vacuum pumps
para montaje sobre bancada Base plate version

Serie VU VU series
Tecnologa robusta y comprobada Tried-and-tested robust technology
para vaco poco profundo for rough vacuum
monoetapa Single-stage
tamaos VU-20 a VU-220 sin vlvulas VU-20 up to VU-220 without valves
tamaos VU-300 a VU-1600 con vlvulas de VU-300 up to VU-1600 with valve flaps
mariposa With mechanical seal
con cierre mecnico 120 up to 150 mbar
de 120 a 150 mbar

Serie VU-351 / 451 VU-351 / 451 series

Tecnologa robusta y comprobada Robust technology
para vaco poco profundo for deep vacuum ranges
monoetapa Single-stage
con vlvulas de mariposa With valve flaps
con cierre mecnico With mechanical seal
33 mbar 33 mbar

Serie VH VH series
Tecnologa robusta y comprobada Tried-and-tested robust technology
para vaco poco profundo for deep vacuum ranges
de dos etapas Double-stage
sin vlvulas Without valves
con cierre mecnico With mechanical seal
33 mbar 33 mbar

Serie VZ VZ series
Tecnologa robusta y poco ruidosa Robust and low-noise technology
para vaco profundo for deep vacuum ranges
de dos etapas Double-stage
sin vlvulas Without valves
las dimensiones de brida idnticas constituyen Identical connection dimensions as VH series
una alternativa a la serie VH In close-coupled1) and base plate version
en formato de bloque1) y sobre bancada With mechanical seal and magnetic coupling2)
con cierre mecnico y accionamiento magntico2) 33 mbar
33 mbar
1) See brochure
1) Ver folleto Liquid ring vacuum pumps
Bombas de vaco de anillo lquido en formato de bloque: Close-coupled version: VZ 110 / 140 / 180
VZ 110 / 140 / 180 2) On request

2) Sobre demanda

2
 VU / VH / VZ
Bombas de vaco de anillo lquido Liquid ring vacuum pumps
para montaje sobre bancada Base plate version

Beneficios al usuario Your Advantage

Elevada fiabilidad operacional High reliability
Principio de funcionamiento simple Simple working principle
Diseo robusto Robust construction
Acabado en materiales de primera calidad Use of high-quality materials
Compactacin a baja temperatura Low-temperature compression
Fcil mantenimiento Favourable maintenance
Reducido nmero de componentes Use of few components
Obturacin con sello en O O-ring sealing
Econmico Cost effective
Configuracin segn las necesidades del usuario Customized construction
Larga vida til Long life-time

Datos tcnicos / Technical data

50 Hz/cycles 60 Hz/cycles Nivel de
Tipo Velocidad Rendimiento Mx. capacidad de Velocidad Rendimiento Mx. capacidad de Mn. presin de presin Pgina
aspiracin aspiracin aspiracin acstica1
Type Motor max. suction Motor max. suction Sound Pages
speed Motor rating capacity speed Motor rating capacity min. inlet pressure pressure
level1
1 / min kW HP m/h CFM rpm kW HP m/h CFM mbar inch Hg a db(A)
VU-20 2800 1,1 1.5 21 12 3400 1,5 2,0 25 15 150 4.4 67 4, 5,
VU-40 2800 1,5 2.0 47 27 3400 2,2 3,0 56 33 150 4.4 67 28, 40
VU-80 1450 3 4.0 80 47 1750 4 5,4 102 60 150 4.4 66
6, 7,
VU-140 1450 4 5.4 145 85 1750 5,5 7,4 174 102 150 4.4 66 29, 40
VU-220 1450 5,5 7.4 223 131 1750 7,5 10,1 280 165 150 4.4 66
VU-300 1450 7,5 10.1 284 167 1750 11 14,8 364 214 150 4.4 66 8, 9,
VU-450 1450 11 14.8 438 258 1750 15 20,1 530 312 150 4.4 66 30, 40
VU-500 1450 15 20.1 510 300 1750 18,5 24,8 625 368 120 3.5 76 10,11,
VU-600 1450 18,5 24.8 669 394 1750 22 29,5 806 474 120 3.5 76 31, 40
VU-800 975 22 29.5 863 508 1175 30 40,2 1030 606 120 3.5 76
12, 13,
VU-1200 975 30 40.2 1173 690 1175 45 60,3 1408 829 120 3.5 76 32, 40
VU-1600 975 45 60.3 1552 913 1175 55 73,8 1900 1118 120 3.5 76
VU-351 1450 7,5 10.1 300 177 1750 11 14,8 360 212 33 1.0 66 14, 15,
VU-451 1450 11 14.8 420 247 1750 15 20,1 500 294 33 1.0 66 33, 40
VH-20 2800 1,1 1.5 21 12 3400 1,5 2,0 25 15 33 1.0 67
VH-40 2800 1,5 2.0 46 27 3400 2,2 3,0 52 31 33 1.0 67 16, 17,
34, 41
VH-60 2800 2,2 3.0 56 33 3400 3 4,0 68 40 33 1.0 67
VH-110 1450 3 4.0 107 63 1750 4 5,4 128 75 33 1.0 66
18, 19,
VH-140 1450 4 5.4 145 85 1750 5,5 7,4 174 102 33 1.0 66 35, 41
VH-180 1450 5,5 7.4 186 109 1750 7,5 10,1 223 131 33 1.0 66
VH-300 1450 7,5 10.1 283 167 1750 11 14,8 314 185 33 1.0 66
20, 21,
VH-350 1450 11 14.8 342 201 1750 15 20,1 411 242 33 1.0 66 36, 41
VH-400 1450 15 20.1 425 250 1750 15 20,1 475 280 33 1.0 66
VH-500 1450 15 20.1 501 295 1750 22 29,5 590 347 33 1.0 79 22, 23,
VH-600 1450 18,5 24.8 616 363 1750 30 40,2 739 435 33 1.0 79 37, 41
VH-800 975 30 40.2 862 507 1175 37 49,6 1032 607 33 1.0 79
24, 25,
VH-1200 975 37 49.6 1252 737 1175 45 60,3 1407 828 33 1.0 79 38, 41
VH-1600 975 45 60.3 1589 935 1175 55 73,8 1717 1011 33 1.0 79
VZ-110-G 1450 3 4.0 107 63 1750 4 5,4 128 75 33 1.0 66
VZ-140-G 1450 4 5.4 145 85 1750 5,5 7,4 174 102 33 1.0 66 26, 27,
39, 42
VZ-180-G 1450 5,5 7.4 186 109 1750 7,5 10,1 223 131 33 1.0 66
1 ) Serie VU hasta 200 mbar / 5.9 inch Hg a 1 ) VU series at 200 mbar / 5.9 inch Hg a
Serie VH hasta 80 mbar / 2.4 inch Hg a VH series at 80 mbar / 2.4 inch Hg a
Serie VZ hasta 80 mbar / 2.4 inch Hg a VZ series at 80 mbar / 2.4 inch Hg a

10/2015 | 1096.0998 Sujeto a modificaciones tcnicas y errores de imprenta. Subject to technical modifications and error.
3
VU-20 / VU-40 II 1/2 G
Bombas de vaco de anillo lquido Liquid ring vacuum pumps
monoetapa, sin vlvulas, con cierre mecnico single-stage, without valves, with mechanical seal

Dibujo acotado / Dimensional drawing

VU-20

VU-40

Conexiones / Connections Datos / Data

UB Conexin para medio de servicio Connection for operation liquid Peso/Weight Conexiones / Connections
Ue Vaciado (tornillo de cierre) Drainage (screw plug) Tipo/Type kg lbs UB Ue UV
UV Conexin para vlvula de vaciado Connection for drainage valve VU-20 20 44
G 3/8 G 1/4 G1/4
VU-40 21 46
Brida ovaladas segn DIN 2558 PN 6 Oval flanges according to DIN 2558 PN 6
Las contrabridas ovaladas forman parte del Oval counter flanges are included
suministro.

Sujeto a modificaciones tcnicas y errores de imprenta. Subject to technical modifications and error. 10/2015 | 1096.0998
4
 VU-20 / VU-40
Bombas de vaco de anillo lquido Liquid ring vacuum pumps
monoetapa, sin vlvulas, con cierre mecnico single-stage, without valves, with mechanical seal

50 Hz | Curvas caractersticas / Characteristic curves 60 Hz | Courbes caractristiques / Characteristic curves

Inlet pressure p [inch Hg a] Inlet pressure p [inch Hg a]

3 4 5 6 7 8 9 10 15 20 26 3 4 5 6 7 8 9 10 15 20 26
60
Q 35
Q
[m3/h] [CFM]
50 VU-40 30

Suction capacity
Capacidad de aspiracin

VU-40 25
40

20
30

15
VU-20
20 VU-20
10

10
5

0 0

P 2,00
VU-40 2.5 P
[kW] 1,75 [HP]
1,50 2.0

Power consumption
Consumo de energa

VU-40
1,25
VU-20 1.5
1,00

0,75 VU-20 1.0

0,50
0.5
0,25

0 0
[l/min] 6 1.6 [GPM]
5
VU-40 VU-40 1.2

Water
requirement
Consumo de
agua

4
3 0.8
VU-20 VU-20
2
0.4
1
0 0
100 120 150 200 300 400 500 600 700 900 100 120 150 200 300 400 500 600 700 900

Presin de aspiracin p [mbar] Pression daspiration p [mbar]

50 Hz-cycles | 2800 1/min - rpm 60 Hz-cycles | 3400 1/min - rpm

La capacidad de aspiracin y el consumo de energa va- Suction capacity and power consumption depending on
rin segn la presin de aspiracin inlet pressure
Las curvas caractersticas aplican compactando aire seco de 20C de nivel de The characteristics are applicable for compression of 20C (68F) dry air from
presin de aspiracin hasta alcanzar presin atmosfrica (1013 mbar) con bom- inlet pressure to atmospheric pressure (1013 mbar / 30 inch Hg a) for nominal
ba de motor trifsico a velocidad nominal y utilizando agua con una temperatu- speed and drive with three phase motors. Ring liquid is water at 15C (59F).
ra de 15C como medio de servicio.
The tolerance of the suction capacity is 10%
Tolerancias: capacidad de aspiracin un 10%, and of the power consumption +10%.
consumo de energa +10%.
With different operating conditions characteristic curves change
Las curvas caractersticas varin segn las condiciones trabajo en el caso con- (e.g. differing gas operating liquid conditions, conveying of additional liquids
creto, por ejemplo los datos especficos del gas transportado o del medio de and/or pumping of gas-steam mixtures).
servicio, inclusin de lquidos, transporte de mezclas de gas y vapor, etc.

10/2015 | 1096.0998 Sujeto a modificaciones tcnicas y errores de imprenta. Subject to technical modifications and error.
5
VU-80 / VU-140 / VU-220 II 1/2 G
Bombas de vaco de anillo lquido Liquid ring vacuum pumps
monoetapa, sin vlvulas, con cierre mecnico single-stage, without valves, with mechanical seal

Dibujo acotado / Dimensional drawing

VU-80

VU-140

VU-220

Conexiones / Connections Datos / Data

UB Conexin para medio de servicio Connection for operation liquid Peso/Weight Conexiones / Connections
Ue/Ue1 Vaciado (tornillo de cierre) Drainage (screw plug) Tipo/Type kg lbs UB Ue Ue1 UL Um US UV
UL Conexin para vlvula de aireacin Vacuum relief valve connection VU-80 48 106
Um Conexin para manmetros Pressure gauge connection VU-140 63 139 G 1/2 G 1/4 G 1/4 G1/2 G 1/4 G 3/4 G 1/4
US Conexin para sensores Connection for sensor VU-220 82 181
UV Conexin para vlvula de vaciado Connection for drainage valve Conexiones de brida segn EN 1092-2 PN10 Flanges dimensions in acc. with EN 1092-2 PN 10
Ejecucin segn ANSI sobre demanda Execution in acc. with ANSI standards on request

Sujeto a modificaciones tcnicas y errores de imprenta. Subject to technical modifications and error. 10/2015 | 1096.0998
6
 VU-80 / VU-140 / VU-220
Bombas de vaco de anillo lquido Liquid ring vacuum pumps
monoetapa, sin vlvulas, con cierre mecnico single-stage, without valves, with mechanical seal

50 Hz | Curvas caractersticas / Characteristic curves 60 Hz | Courbes caractristiques / Characteristic curves

Inlet pressure p [inch Hg a] Inlet pressure p [inch Hg a]

3 4 5 6 7 8 9 10 15 20 26 3 4 5 6 7 8 9 10 15 20 26
300
Q 175
Q
[m3/h] VU-220 [CFM]
250 150

Suction capacity
Capacidad de aspiracin

VU-220
125
200

VU-140 100
150
VU-140
75

100 VU-80
VU-80 50

50
25

0 0

P 7
9 P
[kW] 6 VU-220 8 [HP]
VU-220 7

Power consumption
Consumo de energa

5
VU-140
6
4
VU-140 5
3 VU-80 4
VU-80 3
2
2
1
1
0 0
[l/min] 30 8 [GPM]
25 VU-220 VU-220 6

Water
requirement
Consumo de
agua

20
15 4
VU-80 / 140 VU-80 / 140
10
2
5
0 0
100 120 150 200 300 400 500 600 700 900 100 120 150 200 300 400 500 600 700 900

Presin de aspiracin p [mbar] Pression daspiration p [mbar]

50 Hz-cycles | 1450 1/min - rpm 60 Hz-cycles | 1750 1/min - rpm

La capacidad de aspiracin y el consumo de energa va- Suction capacity and power consumption depending on
rin segn la presin de aspiracin inlet pressure
Las curvas caractersticas aplican compactando aire seco de 20C de nivel de The characteristics are applicable for compression of 20C (68F) dry air from
presin de aspiracin hasta alcanzar presin atmosfrica (1013 mbar) con bom- inlet pressure to atmospheric pressure (1013 mbar / 30 inch Hg a) for nominal
ba de motor trifsico a velocidad nominal y utilizando agua con una temperatu- speed and drive with three phase motors. Ring liquid is water at 15C (59F).
ra de 15C como medio de servicio.
The tolerance of the suction capacity is 10%
Tolerancias: capacidad de aspiracin un 10%, and of the power consumption +10%.
consumo de energa +10%.
With different operating conditions characteristic curves change
Las curvas caractersticas varin segn las condiciones trabajo en el caso con- (e.g. differing gas operating liquid conditions, conveying of additional liquids
creto, por ejemplo los datos especficos del gas transportado o del medio de and/or pumping of gas-steam mixtures).
servicio, inclusin de lquidos, transporte de mezclas de gas y vapor, etc.

10/2015 | 1096.0998 Sujeto a modificaciones tcnicas y errores de imprenta. Subject to technical modifications and error.
7
VU-300 / VU-450 II 1/2 G
Bombas de vaco de anillo lquido Liquid ring vacuum pumps
monoetapa, con vlvulas de mariposa, con cierre mecnico single-stage, with valve flaps, with mechanical seal

Dibujo acotado / Dimensional drawing

VU-300

VU-450

Conexiones / Connections Datos / Data

UB Conexin para medio de servicio Connection for operation liquid Peso/Weight Conexiones / Connections
Ue/Ue1 Vaciado (tornillo de cierre) Drainage (screw plug) Tipo/Type kg lbs UB Ue Ue1 UL Um US UV
UL Conexin para vlvula de aireacin Vacuum relief valve connection VU-300 110 243
G1 G 1/4 G 1/4 G 3/4 G 1/4 G 3/4 G 1/4
Um Conexin para manmetros Pressure gauge connection VU-450 155 342
US Conexin para sensores Connection for sensor Conexiones de brida segn EN 1092-2 PN10 Flanges dimensions in acc. with EN 1092-2 PN 10
UV Conexin para vlvula de vaciado Connection for drainage valve Ejecucin segn ANSI sobre demanda Execution in acc. with ANSI standards on request

Sujeto a modificaciones tcnicas y errores de imprenta. Subject to technical modifications and error. 10/2015 | 1096.0998
8
 VU-300 / VU-450
Bombas de vaco de anillo lquido Liquid ring vacuum pumps
monoetapa, con vlvulas de mariposa, con cierre mecnico single-stage, with valve flaps, with mechanical seal

50 Hz | Curvas caractersticas / Characteristic curves 60 Hz | Courbes caractristiques / Characteristic curves

Inlet pressure p [inch Hg a] Inlet pressure p [inch Hg a]

3 4 5 6 7 8 9 10 15 20 26 3 4 5 6 7 8 9 10 15 20 26
550
Q VU-450
300
Q
[m3/h] 500 [CFM]
275

Suction capacity
Capacidad de aspiracin

450
VU-450
250
400
225
VU-300
350
200

300 175
VU-300
250 150

125
200
100
150
75
100
50
50 25

0 0

P 14
VU-450 18 P
[kW] 12 16 [HP]

VU-450 14

Power consumption
Consumo de energa

10 VU-300
12
8 VU-300 10
6 8

4 6
4
2
2
0 0
[l/min] 60 16 [GPM]
50
VU-450 VU-450 12

Water
requirement
Consumo de
agua

40
30 8
VU-300 VU-300
20
4
10
0 0
100 120 150 200 300 400 500 600 700 900 100 120 150 200 300 400 500 600 700 900

Presin de aspiracin p [mbar] Pression daspiration p [mbar]

50 Hz-cycles | 1450 1/min - rpm 60 Hz-cycles | 1750 1/min - rpm

La capacidad de aspiracin y el consumo de energa va- Suction capacity and power consumption depending on
rin segn la presin de aspiracin inlet pressure
Las curvas caractersticas aplican compactando aire seco de 20C de nivel de The characteristics are applicable for compression of 20C (68F) dry air from
presin de aspiracin hasta alcanzar presin atmosfrica (1013 mbar) con bom- inlet pressure to atmospheric pressure (1013 mbar / 30 inch Hg a) for nominal
ba de motor trifsico a velocidad nominal y utilizando agua con una temperatu- speed and drive with three phase motors. Ring liquid is water at 15C (59F).
ra de 15C como medio de servicio.
The tolerance of the suction capacity is 10%
Tolerancias: capacidad de aspiracin un 10%, and of the power consumption +10%.
consumo de energa +10%.
With different operating conditions characteristic curves change
Las curvas caractersticas varin segn las condiciones trabajo en el caso con- (e.g. differing gas operating liquid conditions, conveying of additional liquids
creto, por ejemplo los datos especficos del gas transportado o del medio de and/or pumping of gas-steam mixtures).
servicio, inclusin de lquidos, transporte de mezclas de gas y vapor, etc.

10/2015 | 1096.0998 Sujeto a modificaciones tcnicas y errores de imprenta. Subject to technical modifications and error.
9
VU-500 / VU-600 II 1/2 G
Bombas de vaco de anillo lquido Liquid ring vacuum pumps
monoetapa, con vlvulas de mariposa, con cierre mecnico single-stage, with valve flaps, with mechanical seal

Dibujo acotado / Dimensional drawing

VU-500

VU-600

Conexiones / Connections Datos / Data

UB Conexin para medio de servicio Connection for operation liquid Peso/Weight Conexiones / Connections
Ue/Ue1 Vaciado (tornillo de cierre) Drainage (screw plug) Type kg lbs UB Ue Ue1 UL Um US UV
UL Conexin para vlvula de aireacin Vacuum relief valve connection VU-500 190 419
G1 G 1/2 G 1/2 G 3/4 G 1/4 G 3/4 G 3/8
Um Conexin para manmetros Pressure gauge connection VU-600 215 474
US Conexin para sensores Connection for sensor Conexiones de brida EN 1092-2 PN10 Flanges dimensions in acc. with EN 1092-2 PN 10
UV Conexin para vlvula de vaciado Connection for drainage valve Ejecucin segn ANSI sobre demanda Execution in acc. with ANSI standards on request

Sujeto a modificaciones tcnicas y errores de imprenta. Subject to technical modifications and error. 10/2015 | 1096.0998
10
 VU-500 / VU-600
Bombas de vaco de anillo lquido Liquid ring vacuum pumps
monoetapa, con vlvulas de mariposa, con cierre mecnico single-stage, with valve flaps, with mechanical seal

50 Hz | Curvas caractersticas / Characteristic curves 60 Hz | Courbes caractristiques / Characteristic curves

Inlet pressure p [inch Hg a] Inlet pressure p [inch Hg a]

3 4 5 6 7 8 9 10 15 20 26 3 4 5 6 7 8 9 10 15 20 26
900
Q 500 Q
[m3/h] VU-600 [CFM]
800
450

Suction capacity
Capacidad de aspiracin

700
VU-600 400
VU-500
600 350
VU-500
500 300

250
400
200
300
150
200
100

100
50

0 0

P 24
VU-600
32
P
[kW] 28 [HP]
20
VU-500 24

Power consumption
Consumo de energa

VU-600
16
20
VU-500
12 16

12
8
8
4
4

0 0
[l/min] 75 20 [GPM]
60 VU-600 VU-600 15

Water
requirement
Consumo de
agua

45
10
30
VU-500 VU-500
15 5

0 0
100 120 150 200 300 400 500 600 700 900 100 120 150 200 300 400 500 600 700 900

Presin de aspiracin p [mbar] Pression daspiration p [mbar]

50 Hz-cycles | 1450 1/min - rpm 60 Hz-cycles | 1750 1/min - rpm

La capacidad de aspiracin y el consumo de energa va- Suction capacity and power consumption depending on
rin segn la presin de aspiracin inlet pressure
Las curvas caractersticas aplican compactando aire seco de 20C de nivel de The characteristics are applicable for compression of 20C (68F) dry air from
presin de aspiracin hasta alcanzar presin atmosfrica (1013 mbar) con bom- inlet pressure to atmospheric pressure (1013 mbar / 30 inch Hg a) for nominal
ba de motor trifsico a velocidad nominal y utilizando agua con una temperatu- speed and drive with three phase motors. Ring liquid is water at 15C (59F).
ra de 15C como medio de servicio.
The tolerance of the suction capacity is 10%
Tolerancias: capacidad de aspiracin un 10%, and of the power consumption +10%.
consumo de energa +10%.
With different operating conditions characteristic curves change
Las curvas caractersticas varin segn las condiciones trabajo en el caso con- (e.g. differing gas operating liquid conditions, conveying of additional liquids
creto, por ejemplo los datos especficos del gas transportado o del medio de and/or pumping of gas-steam mixtures).
servicio, inclusin de lquidos, transporte de mezclas de gas y vapor, etc.

10/2015 | 1096.0998 Sujeto a modificaciones tcnicas y errores de imprenta. Subject to technical modifications and error.
11
VU-800 / VU-1200 / VU-1600 II 1/2 G
Bombas de vaco de anillo lquido Liquid ring vacuum pumps
monoetapa, con vlvulas de mariposa, con cierre mecnico single-stage, with valve flaps, with mechanical seal

Dibujo acotado / Dimensional drawing

VU-800

VU-1200

VU-1600

Conexiones / Connections Datos / Data

UB Conexin para medio de servicio Connection for operation liquid Peso/Weight Conexiones / Connections
Ue/Ue1 Vaciado (tornillo de cierre) Drainage (screw plug) Tipo/Type kg lbs UB Ue Ue1 UL Um US UV
UL Conexin para vlvula de aireacin Vacuum relief valve connection VU-800 360 794
Um Conexin para manmetros Pressure gauge connection VU-1200 470 1036 G2 G 1/4 G 1/2 G 1 1/2 G 3/8 G 3/4 G 3/8
US Conexin para sensores Connection for sensor VU-1600 520 1146
UV Conexin para vlvula de vaciado Connection for drainage valve Conexiones de brida segn EN 1092-2 PN10 Flanges dimensions in acc. with EN 1092-2 PN 10
Ejecucin segn ANSI sobre demanda Execution in acc. with ANSI standards on request

Sujeto a modificaciones tcnicas y errores de imprenta. Subject to technical modifications and error. 10/2015 | 1096.0998
12
 VU-800 / VU-1200 / VU-1600
Bombas de vaco de anillo lquido Liquid ring vacuum pumps
monoetapa, con vlvulas de mariposa, con cierre mecnico single-stage, with valve flaps, with mechanical seal

50 Hz | Curvas caractersticas / Characteristic curves 60 Hz | Courbes caractristiques / Characteristic curves

Inlet pressure p [inch Hg a] Inlet pressure p [inch Hg a]

3 4 5 6 7 8 9 10 15 20 26 3 4 5 6 7 8 9 10 15 20 26
2000
Q VU-1600
1100
Q
[m3/h] 1800 [CFM]
1000

Suction capacity
Capacidad de aspiracin

1600 VU-1600
900
1400 VU-1200
800

1200 VU-1200 700

1000 VU-800 600

VU-800 500
800
400
600
300
400
200

200 100

0 0

P 60 80
P
[kW] VU-1600 [HP]
50 70

60

Power consumption
Consumo de energa

VU-1200
40 VU-1600
50
30 VU-1200 VU-800 40
VU-800 30
20
20
10
10
0 0
[l/min] 125 32 [GPM]
100 VU-1600 / 1200 VU-1600 / 1200
24

Water
requirement
Consumo de
agua

75
16
50
25 VU-800 VU-800 8

0 0
100 120 150 200 300 400 500 600 700 900 100 120 150 200 300 400 500 600 700 900

Presin de aspiracin p [mbar] Pression daspiration p [mbar]

50 Hz-cycles | 975 1/min - rpm 60 Hz-cycles | 1175 1/min - rpm

La capacidad de aspiracin y el consumo de energa va- Suction capacity and power consumption depending on
rin segn la presin de aspiracin inlet pressure
Las curvas caractersticas aplican compactando aire seco de 20C de nivel de The characteristics are applicable for compression of 20C (68F) dry air from
presin de aspiracin hasta alcanzar presin atmosfrica (1013 mbar) con bom- inlet pressure to atmospheric pressure (1013 mbar / 30 inch Hg a) for nominal
ba de motor trifsico a velocidad nominal y utilizando agua con una temperatu- speed and drive with three phase motors. Ring liquid is water at 15C (59F).
ra de 15C como medio de servicio.
The tolerance of the suction capacity is 10%
Tolerancias: capacidad de aspiracin un 10%, and of the power consumption +10%.
consumo de energa +10%.
With different operating conditions characteristic curves change
Las curvas caractersticas varin segn las condiciones trabajo en el caso con- (e.g. differing gas operating liquid conditions, conveying of additional liquids
creto, por ejemplo los datos especficos del gas transportado o del medio de and/or pumping of gas-steam mixtures).
servicio, inclusin de lquidos, transporte de mezclas de gas y vapor, etc.

10/2015 | 1096.0998 Sujeto a modificaciones tcnicas y errores de imprenta. Subject to technical modifications and error.
13
VU-351 / VU-451 II 1/2 G
Bombas de vaco de anillo lquido Liquid ring vacuum pumps
monoetapa, con vlvulas de mariposa, con cierre mecnico single-stage, with valve flaps, with mechanical seal

Dibujo acotado / Dimensional drawing

VU-351

VU-451

Conexiones / Connections Datos / Data

UB Conexin para medio de servicio Connection for operation liquid Peso/Weight Conexiones / Connections
UC Proteccin contra cavitacin Cavitation protection Tipo/Type kg lbs UB UC Ue1 Ue2 UL UiF
Ue1/Ue2 Vaciado (tornillo de cierre) Drainage (screw plug) VU-351 138 304
G 3/4 G 3/8 G 1/2 G 1/2 G 3/4 G 3/8
UL Conexin para vlvula de aireacin Vacuum relief valve connection VU-451 155 342
UiF Tornillo de ajuste del circuito de Adjusting screw for internal liquid Conexiones de brida segn EN 1092-2 PN10 Flanges dimensions in acc. with EN 1092-2 PN 10
retorno de lquido recirculation Ejecucin segn ANSI sobre demanda Execution in acc. with ANSI standards on request

Sujeto a modificaciones tcnicas y errores de imprenta. Subject to technical modifications and error. 10/2015 | 1096.0998
14
 VU-351 / VU-451
Bombas de vaco de anillo lquido Liquid ring vacuum pumps
monoetapa, con vlvulas de mariposa, con cierre mecnico single-stage, with valve flaps, with mechanical seal

50 Hz | Curvas caractersticas / Characteristic curves 60 Hz | Courbes caractristiques / Characteristic curves

Inlet pressure p [inch Hg a] Inlet pressure p [inch Hg a]

1 2 3 4 5 6 7 8 10 15 20 26 1 2 3 4 5 6 7 8 10 15 20 26
550
Q 320
Q
[m3/h] 500 VU-451 280 [CFM]
260

Suction capacity
Capacidad de aspiracin

450
VU-451 240
400 220
VU-351 200
350
VU-351 180
300
160

250 140
120
200
100
150 80

100 60
40
50
20
0 0

P 14
VU-451 18 P
[kW] 12 16 [HP]
VU-451 14

Power consumption
Consumo de energa

10
VU-351 12
8
VU-351 10
6 8
6
4
4
2
2
0 0
[l/min] 60 16 [GPM]
50
12
VU 351 / 451 VU 351 / 451

Water
requirement
Consumo de
agua

40
30 8
20
4
10
0 0
33 40 60 80 100 200 300 400 600 900 33 40 60 80 100 200 300 400 600 900

Presin de aspiracin p [mbar] Pression daspiration p [mbar]

50 Hz-cycles | 1450 1/min - rpm 60 Hz-cycles | 1750 1/min - rpm

La capacidad de aspiracin y el consumo de energa va- Suction capacity and power consumption depending on
rin segn la presin de aspiracin inlet pressure
Las curvas caractersticas aplican compactando aire seco de 20C de nivel de The characteristics are applicable for compression of 20C (68F) dry air from
presin de aspiracin hasta alcanzar presin atmosfrica (1013 mbar) con bom- inlet pressure to atmospheric pressure (1013 mbar / 30 inch Hg a) for nominal
ba de motor trifsico a velocidad nominal y utilizando agua con una temperatu- speed and drive with three phase motors. Ring liquid is water at 15C (59F).
ra de 15C como medio de servicio.
The tolerance of the suction capacity is 10%
Tolerancias: capacidad de aspiracin un 10%, and of the power consumption +10%.
consumo de energa +10%.
With different operating conditions characteristic curves change
Las curvas caractersticas varin segn las condiciones trabajo en el caso con- (e.g. differing gas operating liquid conditions, conveying of additional liquids
creto, por ejemplo los datos especficos del gas transportado o del medio de and/or pumping of gas-steam mixtures).
servicio, inclusin de lquidos, transporte de mezclas de gas y vapor, etc.

10/2015 | 1096.0998 Sujeto a modificaciones tcnicas y errores de imprenta. Subject to technical modifications and error.
15
VH-20 / VH-40 / VH-60 II 1/2 G
Bombas de vaco de anillo lquido Liquid ring vacuum pumps
de dos etapas, sin vlvulas, con cierre mecnico double-stage, without valves, with mechanical seal

Dibujo acotado / Dimensional drawing

VH-20

VH-40

VH-60

Conexiones / Connections Datos / Data

UB Conexin para medio de servicio Connection for operation liquid Peso/Weight Conexiones / Connections
Ue Vaciado (tornillo de cierre) Drainage (screw plug) Tipo/Type kg lbs UB Ue UV
UV Conexin para vlvula de vaciado Connection for drainage valve VH-20 23 51
G 3/8 G 1/4 G 1/4
VH-40 24 53
VH-60 31 68 G 1/2 G 1/4 G 1/4
Brida ovaladas segn DIN 2558 PN 6 Oval flanges according to DIN 2558 PN 6
Las contrabridas ovaladas forman parte del Oval counter flanges are included
suministro

Sujeto a modificaciones tcnicas y errores de imprenta. Subject to technical modifications and error. 10/2015 | 1096.0998
16
 VH-20 / VH-40 / VH-60
Bombas de vaco de anillo lquido Liquid ring vacuum pumps
de dos etapas, sin vlvulas, con cierre mecnico double-stage, without valves, with mechanical seal

50 Hz | Curvas caractersticas / Characteristic curves 60 Hz | Courbes caractristiques / Characteristic curves

Inlet pressure p [inch Hg a] Inlet pressure p [inch Hg a]

1 2 3 4 5 6 7 8 10 15 20 26 1 2 3 4 5 6 7 8 10 15 20 26
70
Q 40 Q
[m3/h] VH-60 [CFM]
60 35
VH-60

Suction capacity
Capacidad de aspiracin

VH-40
50 30
VH-40

25
40

20
30
VH-20
15
VH-20
20
10

10
5

0 0

P 2,8
VH-60 3.5 P
[kW] 2,4 [HP]
3.0

Power consumption
VH-60
Consumo de energa

2,0
VH-40 2.5
1,6
VH-40 2.0
1,2 VH-20 1.5
VH-20
0,8 1.0

0,4 0.5

0 0
[l/min] 8 [GPM]
2.0
VH-60 VH-60
6 1.5

Water
requirement
Consumo de
agua

4 1.0
VH-20 / 40 VH-20 / 40
2 0.5

0 0
33 40 60 80 100 200 300 400 600 900 33 40 60 80 100 200 300 400 600 900

Presin de aspiracin p [mbar] Pression daspiration p [mbar]

50 Hz-cycles | 2800 1/min - rpm 60 Hz-cycles | 3400 1/min - rpm

La capacidad de aspiracin y el consumo de energa va- Suction capacity and power consumption depending on
rin segn la presin de aspiracin inlet pressure
Las curvas caractersticas aplican compactando aire seco de 20C de nivel de The characteristics are applicable for compression of 20C (68F) dry air from
presin de aspiracin hasta alcanzar presin atmosfrica (1013 mbar) con bom- inlet pressure to atmospheric pressure (1013 mbar / 30 inch Hg a) for nominal
ba de motor trifsico a velocidad nominal y utilizando agua con una temperatu- speed and drive with three phase motors. Ring liquid is water at 15C (59F).
ra de 15C como medio de servicio.
The tolerance of the suction capacity is 10%
Tolerancias: capacidad de aspiracin un 10%, and of the power consumption +10%.
consumo de energa +10%.
With different operating conditions characteristic curves change
Las curvas caractersticas varin segn las condiciones trabajo en el caso con- (e.g. differing gas operating liquid conditions, conveying of additional liquids
creto, por ejemplo los datos especficos del gas transportado o del medio de and/or pumping of gas-steam mixtures).
servicio, inclusin de lquidos, transporte de mezclas de gas y vapor, etc.

10/2015 | 1096.0998 Sujeto a modificaciones tcnicas y errores de imprenta. Subject to technical modifications and error.
17
VH-110 / VH-140 / VH-180 II 1/2 G
Bombas de vaco de anillo lquido Liquid ring vacuum pumps
de dos etapas, sin vlvulas, con cierre mecnico double-stage, without valves, with mechanical seal

Dibujo acotado / Dimensional drawing

VH-110

VH-140

VH-180

Conexiones / Connections Datos / Data

UB Conexin para medio de servicio Connection for operation liquid Peso/Weight Conexiones / Connections
Ue/Ue1 Vaciado (tornillo de cierre) Drainage (screw plug) Tipo/Type kg lbs UB Ue Ue1 UL Um US UV
UL Conexin para vlvula de aireacin Vacuum relief valve connection VH-110 62 137
Um Conexin para manmetros Pressure gauge connection VH-140 77 170 G 1/2 G 1/4 G 1/8 G 1/2 G 1/4 G 3/4 G 1/4
US Conexin para sensores Connection for sensor VH-180 86 190
UV Conexin para vlvula de vaciado Connection for drainage valve Conexiones de brida segn EN 1092-2 PN10 Flanges dimensions in acc. with EN 1092-2 PN 10
Ejecucin segn ANSI sobre demanda Execution in acc. with ANSI standards on request

Sujeto a modificaciones tcnicas y errores de imprenta. Subject to technical modifications and error. 10/2015 | 1096.0998
18
 VH-110 / VH-140 / VH-180
Bombas de vaco de anillo lquido Liquid ring vacuum pumps
de dos etapas, sin vlvulas, con cierre mecnico double-stage, without valves, with mechanical seal

50 Hz | Curvas caractersticas / Characteristic curves 60 Hz | Courbes caractristiques / Characteristic curves

Inlet pressure p [inch Hg a] Inlet pressure p [inch Hg a]

1 2 3 4 5 6 7 8 10 15 20 26 1 2 3 4 5 6 7 8 10 15 20 26
250
Q 140 Q
[m3/h] 225 VH-180 [CFM]

120

Suction capacity
Capacidad de aspiracin

200
VH-180
175 VH-140
100

150 VH-140
80
VH-110
125
VH-110
100 60

75
40

50
20
25

0 0

P 7
P
[kW] VH-180 [HP]
6 8

Power consumption
Consumo de energa

5 VH-180
VH-140 6
4
VH-140 VH-110
3 VH-110 4

2
2
1

0 0
[l/min] 20 [GPM]
5
VH-110 / 140 / 180 VH-110 / 140 / 180
15 4

Water
requirement
Consumo de
agua

3
10
2
5 1
0 0
33 40 60 80 100 200 300 400 600 900 33 40 60 80 100 200 300 400 600 900

Presin de aspiracin p [mbar] Pression daspiration p [mbar]

50 Hz-cycles | 1450 1/min - rpm 60 Hz-cycles | 1750 1/min - rpm

La capacidad de aspiracin y el consumo de energa va- Suction capacity and power consumption depending on
rin segn la presin de aspiracin inlet pressure
Las curvas caractersticas aplican compactando aire seco de 20C de nivel de The characteristics are applicable for compression of 20C (68F) dry air from
presin de aspiracin hasta alcanzar presin atmosfrica (1013 mbar) con bom- inlet pressure to atmospheric pressure (1013 mbar / 30 inch Hg a) for nominal
ba de motor trifsico a velocidad nominal y utilizando agua con una temperatu- speed and drive with three phase motors. Ring liquid is water at 15C (59F).
ra de 15C como medio de servicio.
The tolerance of the suction capacity is 10%
Tolerancias: capacidad de aspiracin un 10%, and of the power consumption +10%.
consumo de energa +10%.
With different operating conditions characteristic curves change
Las curvas caractersticas varin segn las condiciones trabajo en el caso con- (e.g. differing gas operating liquid conditions, conveying of additional liquids
creto, por ejemplo los datos especficos del gas transportado o del medio de and/or pumping of gas-steam mixtures).
servicio, inclusin de lquidos, transporte de mezclas de gas y vapor, etc.

10/2015 | 1096.0998 Sujeto a modificaciones tcnicas y errores de imprenta. Subject to technical modifications and error.
19
VH-300 / VH-350 / VH-400 II 1/2 G
Bombas de vaco de anillo lquido Liquid ring vacuum pumps
de dos etapas, sin vlvulas, con cierre mecnico double-stage, without valves, with mechanical seal

Dibujo acotado / Dimensional drawing

VH-300

VH-350

VH-400

Conexiones / Connections Datos / Data

UB Conexin para medio de servicio Connection for operation liquid Peso/Weight Conexiones / Connections
Ue/Ue1 Vaciado (tornillo de cierre) Drainage (screw plug) Tipo/Type kg lbs UB Ue Ue1 UL Um US UV
UL Conexin para vlvula de aireacin Vacuum relief valve connection VH-300 139 306
Um Conexin para manmetros Pressure gauge connection VH-350 151 333 G1 G 1/4 G 1/4 G 3/4 G 1/4 G 3/4 G 1/4
US Conexin para sensores Connection for sensor VH-400 163 360
UV Conexin para vlvula de vaciado Connection for drainage valve Conexiones de brida segn EN 1092-2 PN10 Flanges dimensions in acc. with EN 1092-2 PN 10
Ejecucin segn ANSI sobre demanda Execution in acc. with ANSI standards on request

Sujeto a modificaciones tcnicas y errores de imprenta. Subject to technical modifications and error. 10/2015 | 1096.0998
20
 VH-300 / VH-350 / VH-400
Bombas de vaco de anillo lquido Liquid ring vacuum pumps
de dos etapas, sin vlvulas, con cierre mecnico double-stage, without valves, with mechanical seal

50 Hz | Curvas caractersticas / Characteristic curves 60 Hz | Courbes caractristiques / Characteristic curves

Inlet pressure p [inch Hg a] Inlet pressure p [inch Hg a]

1 2 3 4 5 6 7 8 10 15 20 26 1 2 3 4 5 6 7 8 10 15 20 26
500
Q VH-400 280 Q
[m3/h] 450 260 [CFM]
VH-400
VH-350 240

Suction capacity
Capacidad de aspiracin

400
220
350 VH-350 200
VH-300
180
300 VH-300
160
250 140

200 120
100
150
80

100 60
40
50
20
0 0

P 16
VH-400 20 P
[kW] 14 [HP]
18
12 VH-350 16

Power consumption
Consumo de energa

VH-400
10 14
VH-350 VH-300
12
8
VH-300 10
6 8

4 6
4
2
2
0 0
[l/min] 60 16 [GPM]
50 VH-300 / 350 / 400 VH-300 / 350 / 400
12

Water
requirement
Consumo de
agua

40
30 8
20
4
10
0 0
33 40 60 80 100 200 300 400 600 900 33 40 60 80 100 200 300 400 600 900

Presin de aspiracin p [mbar] Pression daspiration p [mbar]

50 Hz-cycles | 1450 1/min - rpm 60 Hz-cycles | 1750 1/min - rpm

La capacidad de aspiracin y el consumo de energa va- Suction capacity and power consumption depending on
rin segn la presin de aspiracin inlet pressure
Las curvas caractersticas aplican compactando aire seco de 20C de nivel de The characteristics are applicable for compression of 20C (68F) dry air from
presin de aspiracin hasta alcanzar presin atmosfrica (1013 mbar) con bom- inlet pressure to atmospheric pressure (1013 mbar / 30 inch Hg a) for nominal
ba de motor trifsico a velocidad nominal y utilizando agua con una temperatu- speed and drive with three phase motors. Ring liquid is water at 15C (59F).
ra de 15C como medio de servicio.
The tolerance of the suction capacity is 10%
Tolerancias: capacidad de aspiracin un 10%, and of the power consumption +10%.
consumo de energa +10%.
With different operating conditions characteristic curves change
Las curvas caractersticas varin segn las condiciones trabajo en el caso con- (e.g. differing gas operating liquid conditions, conveying of additional liquids
creto, por ejemplo los datos especficos del gas transportado o del medio de and/or pumping of gas-steam mixtures).
servicio, inclusin de lquidos, transporte de mezclas de gas y vapor, etc.

10/2015 | 1096.0998 Sujeto a modificaciones tcnicas y errores de imprenta. Subject to technical modifications and error.
21
VH-500 / VH-600 II 1/2 G
Bombas de vaco de anillo lquido Liquid ring vacuum pumps
de dos etapas, sin vlvulas, con cierre mecnico double-stage, without valves, with mechanical seal

Dibujo acotado / Dimensional drawing

VH-500

VH-600

Conexiones / Connections Datos / Data

UB Conexin para medio de servicio Connection for operation liquid Peso/Weight Conexiones / Connections
Ue/Ue1 Vaciado (tornillo de cierre) Drainage (screw plug) Tipo/Type kg lbs UB Ue Ue1 UL Um US UV
UL Conexin para vlvula de aireacin Vacuum relief valve connection VH-500 215 474
G1 G 1/2 G 1/2 G 3/4 G 1/4 G 3/4 G 3/8
Um Conexin para manmetros Pressure gauge connection VH-600 240 529
US Conexin para sensores Connection for sensor Conexiones de brida segn EN 1092-2 PN10 Flanges dimensions in acc. with EN 1092-2 PN 10
UV Conexin para vlvula de vaciado Connection for drainage valve Ejecucin segn ANSI sobre demanda Execution in acc. with ANSI standards on request

Sujeto a modificaciones tcnicas y errores de imprenta. Subject to technical modifications and error. 10/2015 | 1096.0998
22
 VH-500 / VH-600
Bombas de vaco de anillo lquido Liquid ring vacuum pumps
de dos etapas, sin vlvulas, con cierre mecnico double-stage, without valves, with mechanical seal

50 Hz | Curvas caractersticas / Characteristic curves 60 Hz | Courbes caractristiques / Characteristic curves

Inlet pressure p [inch Hg a] Inlet pressure p [inch Hg a]

1 2 3 4 5 6 7 8 10 15 20 26 1 2 3 4 5 6 7 8 10 15 20 26
800
Q VH-600
450 Q
[m3/h] [CFM]
700
400

Suction capacity
Capacidad de aspiracin

VH-600 VH-500
600 350

VH-500
500 300

250
400

200
300
150
200
100

100
50

0 0

P 30 40
P
[kW] VH-600
35 [HP]
25
30

Power consumption
Consumo de energa

20 VH-500
25
VH-600
15 20
VH-500
15
10
10
5
5

0 0
[l/min] 50 [GPM]
VH 500 / 600 VH 500 / 600 12
40
9

Water
requirement
Consumo de
agua

30
6
20
10 3

0 0
33 40 60 80 100 200 300 400 600 900 33 40 60 80 100 200 300 400 600 900

Presin de aspiracin p [mbar] Pression daspiration p [mbar]

50 Hz-cycles | 1450 1/min - rpm 60 Hz-cycles | 1750 1/min - rpm

La capacidad de aspiracin y el consumo de energa va- Suction capacity and power consumption depending on
rin segn la presin de aspiracin inlet pressure
Las curvas caractersticas aplican compactando aire seco de 20C de nivel de The characteristics are applicable for compression of 20C (68F) dry air from
presin de aspiracin hasta alcanzar presin atmosfrica (1013 mbar) con bom- inlet pressure to atmospheric pressure (1013 mbar / 30 inch Hg a) for nominal
ba de motor trifsico a velocidad nominal y utilizando agua con una temperatu- speed and drive with three phase motors. Ring liquid is water at 15C (59F).
ra de 15C como medio de servicio.
The tolerance of the suction capacity is 10%
Tolerancias: capacidad de aspiracin un 10%, and of the power consumption +10%.
consumo de energa +10%.
With different operating conditions characteristic curves change
Las curvas caractersticas varin segn las condiciones trabajo en el caso con- (e.g. differing gas operating liquid conditions, conveying of additional liquids
creto, por ejemplo los datos especficos del gas transportado o del medio de and/or pumping of gas-steam mixtures).
servicio, inclusin de lquidos, transporte de mezclas de gas y vapor, etc.

10/2015 | 1096.0998 Sujeto a modificaciones tcnicas y errores de imprenta. Subject to technical modifications and error.
23
VH-800 / VH-1200 / VH-1600 II 1/2 G
Bombas de vaco de anillo lquido Liquid ring vacuum pumps
de dos etapas, sin vlvulas, con cierre mecnico double-stage, without valves, with mechanical seal

Dibujo acotado / Dimensional drawing

VH-800

VH-1200

VH-1600

Conexiones / Connections Datos / Data

UB Conexin para medio de servicio Connection for operation liquid Peso/Weight Conexiones / Connections
Ue/Ue1 Vaciado (tornillo de cierre) Drainage (screw plug) Tipo/Type kg lbs UB Ue Ue1 UL Um US UV
UL Conexin para vlvula de aireacin Vacuum relief valve connection VH-800 450 992
Um Conexin para manmetros Pressure gauge connection VH-1200 570 1257 G2 G 1/4 G 1/2 G 1 1/2 G 3/8 G 3/4 G 1/2
US Conexin para sensores Connection for sensor VH-1600 640 1411
UV Conexin para vlvula de vaciado Connection for drainage valve Conexiones de brida segn EN 1092-2 PN10 Flanges dimensions in acc. with EN 1092-2 PN 10
Ejecucin segn ANSI sobre demanda Execution in acc. with ANSI standards on request

Sujeto a modificaciones tcnicas y errores de imprenta. Subject to technical modifications and error. 10/2015 | 1096.0998
24
 VH-800 / VH-1200 / VH-1600
Bombas de vaco de anillo lquido Liquid ring vacuum pumps
de dos etapas, sin vlvulas, con cierre mecnico double-stage, without valves, with mechanical seal

50 Hz | Curvas caractersticas / Characteristic curves 60 Hz | Courbes caractristiques / Characteristic curves

Inlet pressure p [inch Hg a] Inlet pressure p [inch Hg a]

1 2 3 4 5 6 7 8 10 15 20 26 1 2 3 4 5 6 7 8 10 15 20 26
1800
Q VH-1600
1000 Q
[m3/h] VH-1600 [CFM]
1600
900

Suction capacity
Capacidad de aspiracin

VH-1200
1400
800
VH-1200
1200 700
VH-800
1000 600
VH-800
500
800
400
600
300
400
200

200
100

0 0

P 60 80
P
[kW] VH-1600 70 [HP]
50
60

Power consumption
Consumo de energa

40 VH-1600 VH-1200
50
VH-800
30 VH-1200 40
VH-800
30
20
20
10
10

0 0
[l/min] 120 [GPM]
30

Water
requirement
Consumo de
agua

80
20
VH-800 / 1200 / 1600 VH-800 / 1200 / 1600
40 10

0 0
33 40 60 80 100 200 300 400 600 900 33 40 60 80 100 200 300 400 600 900

Presin de aspiracin p [mbar] Pression daspiration p [mbar]

50 Hz-cycles | 975 1/min - rpm 60 Hz-cycles | 1175 1/min - rpm

La capacidad de aspiracin y el consumo de energa va- Suction capacity and power consumption depending on
rin segn la presin de aspiracin inlet pressure
Las curvas caractersticas aplican compactando aire seco de 20C de nivel de The characteristics are applicable for compression of 20C (68F) dry air from
presin de aspiracin hasta alcanzar presin atmosfrica (1013 mbar) con bom- inlet pressure to atmospheric pressure (1013 mbar / 30 inch Hg a) for nominal
ba de motor trifsico a velocidad nominal y utilizando agua con una temperatu- speed and drive with three phase motors. Ring liquid is water at 15C (59F).
ra de 15C como medio de servicio.
The tolerance of the suction capacity is 10%
Tolerancias: capacidad de aspiracin un 10%, and of the power consumption +10%.
consumo de energa +10%.
With different operating conditions characteristic curves change
Las curvas caractersticas varin segn las condiciones trabajo en el caso con- (e.g. differing gas operating liquid conditions, conveying of additional liquids
creto, por ejemplo los datos especficos del gas transportado o del medio de and/or pumping of gas-steam mixtures).
servicio, inclusin de lquidos, transporte de mezclas de gas y vapor, etc.

10/2015 | 1096.0998 Sujeto a modificaciones tcnicas y errores de imprenta. Subject to technical modifications and error.
25
VZ-110-G / VZ-140-G / VZ-180-G II 1/2 G
Bombas de vaco de anillo lquido Liquid ring vacuum pumps
de dos etapas, sin vlvulas, con cierre mecnico double-stage, without valves, with mechanical seal

Dibujo acotado / Dimensional drawing

VZ-110-G

VZ-140-G

VZ-180-G

VZ-100-G / 140G / 180G tambin disponible en formato de bloque. VZ-100-G / 140G / 180G also available in close-coupled version.
Ver folleto: Bombas de vaco de anillo lquido en formato de bloque: VZ 110 / 140 / 180 See brochure Liquid ring vacuum pumps close-coupled version: VZ 110 / 140 / 180

Conexiones / Connections Datos / Data

UB Conexin para medio de servicio Connection for operation liquid Peso/Weight Conexiones / Connections
UC Proteccin contra cavitacin Cavitation protection Tipo/Type kg lbs UB UC Ue Ue1 UL Um US UV
Ue/Ue1 Vaciado (tornillo de cierre) Drainage (screw plug) VZ-110-G 73 161
UL Conexin para vlvula de aireacin Vacuum relief valve connection VZ-140-G 75 165 G 1/2 G 1/4 G 1/2 G 1/4 G 1/2 G 1/4 G 3/4 G 1/2
Um Conexin para manmetros Pressure gauge connection VZ-180-G 85 187
US Conexin para sensores Connection for sensor Conexiones de brida segn Flange connecting dimensions according to
UV Conexin para vlvula de vaciado Connection for drainage valve EN 1092-2PN10 y ANSI B 16.5 EN 1092-2 PN 10 and ANSI B 16.5

Sujeto a modificaciones tcnicas y errores de imprenta. Subject to technical modifications and error. 10/2015 | 1096.0998
26
 VZ-110-G / VZ-140-G / VZ-180-G
Bombas de vaco de anillo lquido Liquid ring vacuum pumps
de dos etapas, sin vlvulas, con cierre mecnico double-stage, without valves, with mechanical seal

50 Hz | Curvas caractersticas / Characteristic curves 60 Hz | Courbes caractristiques / Characteristic curves

Inlet pressure p [inch Hg a] Inlet pressure p [inch Hg a]

1 2 3 4 5 6 7 8 10 15 20 26 1 2 3 4 5 6 7 8 10 15 20 26
250
Q 140 Q
[m3/h] 225 VZ-180 [CFM]

120

Suction capacity
Capacidad de aspiracin

200
VZ-180
175 VZ-140
100
VZ-140
150
80
VZ-110
125
VZ-110
100 60

75
40

50
20
25

0 0

P 7
P
[kW] VZ-180 [HP]
6 8

Power consumption
Consumo de energa

5 VZ-180
VZ-140 6
4
VZ-140 VZ-110
3 VZ-110 4

2
2
1

0 0
[l/min] 20 [GPM]
5
VZ-110 / 140 / 180 VZ-110 / 140 / 180
15 4

Water
requirement
Consumo de
agua

3
10
2
5 1
0 0
33 40 60 80 100 200 300 400 600 900 33 40 60 80 100 200 300 400 600 900

Presin de aspiracin p [mbar] Pression daspiration p [mbar]

50 Hz-cycles | 1450 1/min - rpm 60 Hz-cycles | 1750 1/min - rpm

La capacidad de aspiracin y el consumo de energa va- Suction capacity and power consumption depending on
rin segn la presin de aspiracin inlet pressure
Las curvas caractersticas aplican compactando aire seco de 20C de nivel de The characteristics are applicable for compression of 20C (68F) dry air from
presin de aspiracin hasta alcanzar presin atmosfrica (1013 mbar) con bom- inlet pressure to atmospheric pressure (1013 mbar / 30 inch Hg a) for nominal
ba de motor trifsico a velocidad nominal y utilizando agua con una temperatu- speed and drive with three phase motors. Ring liquid is water at 15C (59F).
ra de 15C como medio de servicio.
The tolerance of the suction capacity is 10%
Tolerancias: capacidad de aspiracin un 10%, and of the power consumption +10%.
consumo de energa +10%.
With different operating conditions characteristic curves change
Las curvas caractersticas varin segn las condiciones trabajo en el caso con- (e.g. differing gas operating liquid conditions, conveying of additional liquids
creto, por ejemplo los datos especficos del gas transportado o del medio de and/or pumping of gas-steam mixtures).
servicio, inclusin de lquidos, transporte de mezclas de gas y vapor, etc.

10/2015 | 1096.0998 Sujeto a modificaciones tcnicas y errores de imprenta. Subject to technical modifications and error.
27
VU
Bombas de vaco de anillo lquido Liquid ring vacuum pumps
monoetapa single-stage

Serie VU Cdigo de tipo / VU Series Type Code

Ejemplo Example VU -300 -53 -10 -001
Tipo de la bomba Pump type
Tamao de la bomba Pump size
T1 Cierre mecnico Mechanical seal
T2 Material utilizando Material design
Nmero constructivo Sequence number

T1: Cdigo cierre mecnico / Code mechanical seal

Cdigo / Code 41 50 53 55
Carbn, acero inoxidable,
Cierre mecnico Carbn, acero al cromo, NBR Carbn, acero inoxidable, FFKM Carbn, acero inoxidable, FKM FKM - revestido doble para PTFE
Mechanical seal Carbon, Cr-steel, NBR Carbon, stainless steel, FFKM Carbon, stainless steel, FKM Carbon, stainless steel,
FKM - PTFE double coated

T2: Cdigo materiales / Code material design

Cdigo / Code 10 30 40 60
Tipo / Type VU-20 VU-300 VU-351 VU-20 VU-300* VU-351 VU-600 VU-500 VU-20 VU-20 VU-300* VU-500
VU-40 VU-450 VU-451 VU-40 VU-450 VU-451 VU-800 VU-40 VU-40 VU-450 VU-600
VU-80 VU-80 VU-1200 VU-80 VU-80 VU-800
VU-140 VU-140 VU-1600 VU-140 VU-140 VU-1200
VU-220 VU-220 VU-220 VU-220 VU-1600
Metal no ferroso
Carcasa de aspiracin Fundicin gris Fundicin gris Acero inoxidable
Non-ferrous
Suction casing Cast iron Cast iron Stainless steel
metal
Metal no ferroso
Carcasa de impulsin Fundicin gris Fundicin gris Acero inoxidable
Non-ferrous
Discharge casing Cast iron Cast iron Stainless steel
metal
Disco de acciona- Metal no ferroso
Fundicin gris Acero inoxidable Fundicin gris Acero inoxidable Fundicin gris Acero inoxidable
miento Non-ferrous
Cast iron Stainless steel Cast iron Stainless steel Cast iron Stainless steel
Inter casing metal
Fundicin Metal no ferroso
Cuerpo intermedio Acero Fundicin gris Acero Acero Acero inoxidable
gris Non-ferrous
Stage casing Steel Cast iron Steel Steel Stainless steel
Cast iron metal
Metal no ferroso
Impulsor Metal no ferroso Acero inoxidable Acero Acero inoxidable
Non-ferrous
Impeller Non-ferrous metal Stainless steel Steel Stainless steel
metal
Eje Acero Acero Acero inoxidable Acero inoxidable Acero
Shaft Steel Steel Stainless steel Stainless steel Steel
Manguito protector Acero inoxidable Acero inoxidable
del eje - - - -
Stainless steel Stainless steel
Shaft protection sleeve
Metal no ferroso
Carcasa cierre del eje Fundicin gris Fundicin gris Acero inoxidable
Non-ferrous
Shaft seal casing Cast iron Cast iron Stainless steel
metal
Vlvula de mariposa - PTFE - PTFE - - PTFE
Valve flap
Referencias de los materiales empleados exactos sobre demanda * Sobre demanda
Precise material specifications on request * On request

Sujeto a modificaciones tcnicas y errores de imprenta. Subject to technical modifications and error. 10/2015 | 1096.0998
28
 VH
Bombas de vaco de anillo lquido Liquid ring vacuum pumps
de dos etapas double-stage

Serie VH Cdigo de tipo / VH Series Type Code

Ejemplo Example VH -300 -53 -10 -001
Tipo de la bomba Pump type
Tamao de la bomba Pump size
T1 Cierre mecnico Mechanical seal
T2 Material utilizando Material design
Nmero constructivo Sequence number

T1: Cdigo cierre mecnico / Code mechanical seal

Cdigo / Code 41 50 53 55
Carbn, acero inoxidable,
Cierre mecnico Carbn, acero al cromo, NBR Carbn, acero inoxidable, FFKM Carbn, acero inoxidable, FKM FKM - revestido doble para PTFE
Mechanical seal Carbon, Cr-steel, NBR Carbon, stainless steel, FFKM Carbon, stainless steel, FKM Carbon, stainless steel,
FKM - PTFE double coated

T2: Cdigo materiales / Code material design

Cdigo / Code 10 30 40 60
Tipo / Type VH-20 VH-300 VH-20 VH-300 VH-500 VH-20 VH-20 VH-300 VH-500
VH-40 VH-350 VH-40 VH-350 VH-600 VH-40 VH-40 VH-350 VH-600
VH-60 VH-400 VH-60 VH-400 VH-800 VH-60 VH-60 VH-400 VH-800
VH-110 VH-110 VH-1200 VH-110 VH-110 VH-1200
VH-140 VH-140 VH-1600 VH-140 VH-140 VH-1600
VH-180 VH-180 VH-180 VH-180

Carcasa de aspiracin Fundicin gris Fundicin gris Metal no ferroso Acero inoxidable
Suction casing Cast iron Cast iron Non-ferrous metal Stainless steel

Carcasa de impulsin Fundicin gris Fundicin gris Metal no ferroso Acero inoxidable
Discharge casing Cast iron Cast iron Non-ferrous metal Stainless steel
Disco de acciona- Fundicin gris Fundicin gris Metal no ferroso Acero inoxidable
miento Cast iron Cast iron Non-ferrous metal Stainless steel
Inter casing
Cuerpo intermedio Acero Acero Metal no ferroso Acero inoxidable
Stage casing Steel Steel Non-ferrous metal Stainless steel

Impulsor Metal no ferroso Acero inoxidable Acero Metal no ferroso Acero inoxidable
Impeller Non-ferrous metal Stainless steel Steel Non-ferrous metal Stainless steel
Acero inoxi-
Eje Acero Acero Acero inoxidable Acero
dable
Shaft Steel Steel Stainless steel Steel
Stainless steel
Manguito protector Acero inoxi- Acero inoxi-
del eje - - dable - - dable
Shaft protection sleeve Stainless steel Stainless steel
Carcasa cierre del eje Fundicin gris Fundicin gris Metal no ferroso Acero inoxidable
Shaft seal casing Cast iron Cast iron Non-ferrous metal Stainless steel
Referencias de los materiales empleados exactos sobre demanda
Precise material specifications on request

10/2015 | 1096.0998 Sujeto a modificaciones tcnicas y errores de imprenta. Subject to technical modifications and error.
29
VZ
Bombas de vaco de anillo lquido Liquid ring vacuum pumps
de dos etapas double-stage

Serie VZ Cdigo de tipo / VZ Series Type Code

Ejemplo Example VZ -110 -G -53 -55 -001
Tipo de la bomba Pump type
Tamao de la bomba Pump size
Ejecucin sobre bancada Base plate version
T1 Cierre mecnico Mechanical seal
T2 Material utilizando Material design
Nmero constructivo Sequence number

T1: Cdigo cierre mecnico / Code mechanical seal

Cdigo / Code 41 50 53 55
Carbn, acero inoxidable,
Cierre mecnico Carbn, acero al cromo, NBR Carbn, acero inoxidable, FFKM Carbn, acero inoxidable, FKM FKM - revestido doble para PTFE
Mechanical seal Carbon, Cr-steel, NBR Carbon, stainless steel, FFKM Carbon, stainless steel, FKM Carbon, stainless steel,
FKM - PTFE double coated

T2: Cdigo materiales / Code material design

Cdigo / Code 35 55 65
Tipo / Type VZ-110-G VZ-110-G VZ-110-G
VZ-140-G VZ-140-G VZ-140-G
VZ-180-G VZ-180-G VZ-180-G

Carcasa de aspiracin Fundicin gris Fundicin gris Acero inoxidable

Suction casing Cast iron Cast iron Stainless steel

Carcasa de impulsin Fundicin gris Fundicin gris Acero inoxidable

Discharge casing Cast iron Cast iron Stainless steel
Disco de acciona- Acero inoxidable Acero inoxidable Acero inoxidable, revestido para SiC
miento Stainless steel Stainless steel Stainless steel, SiC coated
Inter casing
Cuerpo intermedio Fundicin gris Fundicin gris Acero inoxidable
Stage casing Cast iron Cast iron Stainless steel

Impulsor Acero inoxidable Metal no ferroso Acero inoxidable

Impeller Stainless steel Non-ferrous metal Stainless steel

Eje Acero Acero Acero inoxidable

Shaft Steel Steel Stainless steel

Carcasa cierre del eje Acero inoxidable Acero inoxidable Acero inoxidable
Shaft seal casing Stainless steel Stainless steel Stainless steel
Referencias de los materiales empleados exactos sobre demanda
Precise material specifications on request

Sujeto a modificaciones tcnicas y errores de imprenta. Subject to technical modifications and error. 10/2015 | 1096.0998
30
 Representaciones / Representations

D Germany B Belgium GB Great Britain N Norway RO Romania

Heat transfer pumps / Pompes pour Speck ABC UK Ltd Ing. Per Gjerdrum A/S S.C. Gimsid S.R.L.
Deutschland Ost fluid thermique AreenA House P.O. Box 154 Str. Arcului nr. 9, Arp.2
Huckauf Ingenieure GmbH FLOWMOTION BVBA Moston Road, Nye Vakasvei 28 021031 Bucuresti
Rathausstrae 5 Mergelweg 3 Elworth, Sandbach 1360 Nesbru Tel.: +40 21 2118701
09244 Lichtenau 1730 Asse Cheshire CW11 3HL Tel.: +47 667 756 00 Fax: +40 21 2102675
Tel.: +49 37208 660 80 Tel.: +32 2 309 67 13 Tel.: +44 844 764 063 2 Fax: +47 667 756 01 gimsid@gimsid.ro
Fax: +49 37208 660 77 Fax. +32 2 309 69 13 Fax: +44 844 764 063 4 Pg-pumps@pergjerdrum.no www.gimsid.ro
info@huckauf.de info@flowmotion.be admin@speck-abc.com www.pg-marinegroup.com
www.huckauf.de www.flowmotion.be www.speck-abc.com RUS Russia
SPECK - Pompen Belgie N.V.
NL Netherlands LLC Firm Kreoline
Berlin
Huckauf Ingenieure GmbH
Bierweg 24 GR Greece Centrifugal pumps /
Centrifugaalpompen
Yunosti str., 5/3
Moscow 111395
9880 Aalter SPECK Hellas
Fontanepromenade 17 Tel.: +32 937 530 39 Speck Pompen Nederland B.V. Tel.: +7 495 737 321 4
10967 Berlin Salaminos St. 54 Businesspark 7Poort Fax: +7 495 769 844 0
Fax: +32 932 500 17 17676 Kallithea
Tel.: +49 30 890 959 92 info@speckpompen.be Stationspoort 10 Mobile: +7 495 505 198 8
Fax: +49 30 890 959 91 Tel.: +30 210 956 500 6 6902 KG Zevenaar info@kreoline.ru
www.speckpompen.be Fax: +30 210 957 747 3
info@huckauf.de Tel.: +31 316 331 757 www.kreoline.ru
www.huckauf.de grecha@speckhellas.gr Fax: +31 316 528 618
BG Bulgaria info@speck.nl S Sweden
Norddeutschland EVROTECH OOD www.speck.nl
Ingenieure Willy Wandrach GmbH 54 A, Manastirska Str. I Italy Hugo Tillquist AB
Flurstrae 105 1111 Sofia Centrifugal pumps / Pompe centrifughe Vacuum pumps / Vacumpompen P.O.Box 1120
22549 Hamburg Tel.: +359 2 971 32 73 Speck Industries S.r.l DOVAC B.V. 16422 Kista
Tel.: +49 40 398 624 0 Fax: +359 2 971 22 88 Via Garibaldi, 53 Meer en Duin 228 Tel.: +46 859 463 200
Fax: +49 40 398 624 28 office@evrotech.com 20010 Canegrate (MI) 2163 HD Lisse Fax: +46 875 136 95
info@speck-nord.de www.evrotech.com Tel.: +39 0331 405 805 Tel.: +31 252 423 363 info@tillquist.com
www.speck-nord.de Mobile: +39 339 16 59 440 Fax: +31 252 417 946 www.tillquist.com
info@speckindustries.it info@dovac.nl
Hannover, Kassel CH Switzerland www.speckindustries.it www.dovac.nl SK Slovakian Republic
IVT Pumpen GmbH Speck Pumpen Subsidiary Czech Republic (CZ)
Zum Wischfeld 1A Vacuum pumps / Pompe per vuoto Heat transfer pumps / Pompes pour
Speck Pumpen Industrie GmbH Rio Nanta S.r.l. fluid thermique
31749 Auetal
Tel.: +49 5752 929 597 Brglenweg 4 Via Mauro Macchi, 42 FLOWMOTION BVBA SLO Slovenia
Fax: +49 5752 929 599 8854 Galgenen 20124 Milano Mergelweg 3 SLOTEH Branko Gabric s.p.
Mobile: +49 172 511 699 9 Tel.: +41 554 425 094 Tel. +39 028 940 642 1 1730 Asse Zagrebka cesta 20
info@ivt-pumpen.de Fax: +41 554 425 094 Fax: +39 028 323 913 Tel.: +32 2 309 67 13 2000 Maribor
www.ivt-pumpen.de info@speckswitzerland.com Mobile: +39 339 658 781 6 Fax. +32 2 309 69 13 Tel.: +38 624 614 460
www.speckswitzerland.com rionanta@rionanta.it info@flowmotion.be Fax: +38 624 614 465
Kln www.rionanta.it www.flowmotion.be branko.gabric@amis.net
Sales and Service www.sloteh.si
Huckauf Ingenieure GmbH
Grillenpfad 28 HnyTec AG IL Israel NZ New Zealand
40764 Langenfeld Lttfeld 2 Ambi-Tech SGP Singapore
Tel.: +49 2173 914 560 6142 Gettnau Electronics Engineering Ltd., MacEwans Pumping Systems Ltd. Malaysia (MAL)
Fax: +49 2173 914 588 Tel.: +41 62 544 33 00 20 Taas st.; 19 Ride Way
info@huckauf.de North Harbour Industrial Estate
www.huckauf.de
Fax: +41 62 544 33 10
contact@haenytec.ch
Industrial Area, Kfar-Saba
P.O. Box 50 Tel.: +64 941 548 60 T Thailand
www.haenytec.ch Kfar-Saba 44425 Fax: +64 941 548 68 Speck Pumpen Subsidiary
Bayern, Baden-Wrttemberg Tel.: +972 976 775 00 pumps-ak@macewans.co.nz
www.macewans.co.nz Pump Systems Flux & Speck Co. Ltd.
Speck Pumpen Fax: +972 976 774 00 181/4 Soi Anamai
VERKAUFSGESELLSCHAFT GmbH Service Arie.Weiss@PWeiss.d2g.com
MEYER ARMATUREN PUMPEN GMBH Srinakarin Road
Hauptstrae 1 3 www.pweiss.co.il P Portugal Suanluang Bangkok 10250
91233 Neunkirchen a. Sand Rigackerstrasse 19
5610 Wohlen Ultra Controlo Tel.: +662 320 256 7
Tel.: +49 9123 949 0 Small pumps / Fax: +662 322 248 6
Fax: +49 9123 949 260 Tel. + 41 56 622 77 33 heat transfer pumps : Projectos Industriais, Lda.
Fax + 41 56 622 77 60 Quinta Lavi Armazm 8 thienchai@fluxspeck.com
info@speck-pumps.com Ringel Brothers (1973) Ltd. www.fluxspeck.com
www.speck-pumps.com info@meyer-armaturen.ch 134 Hertzel St. Abrunheira
www.meyer-armaturen.ch P.O. Box 5148 27 10 - 089 Sintra
Tel.: +351 219 154 350 TR Turkey
Service CN China
Tel-Aviv 66555
Tel.: +972 368 255 05 Fax: +351 219 259 002 Speck Pompa
Fax: +972 368 220 41 info@ultra-controlo.com San. ve Tic. Ltd. Sti.
Deutschland Mitte Speck Pumpen Subsidiary Mobile: +972 544 623 095 www.ultra-controlo.com Girne Mah., Kckyali Is Merkezi
FSE Fluid Systems Erfurt Jiashan SPECK PUMPS mringel@ringel-bros.co.il B Blok No.12 Maltepe
Poeler Weg 6 Systemtechnik Ltd. www.ringel-bros.co.il PL Poland 34852 Istanbul
99085 Erfurt No. 57, Hong Qiao Rd., E.A. Krupinski Elzbieta Krupinska Tel.: +90 216 375 750 5
Tel.: +49 361 550 715 0 No. 4 Economical Developing Zone, IND India ul. Przymiarki 4A Fax: +90 216 375 753 3
Fax: +49 361 550 715 19 314100 Jiashan Xian, 31-764 Krakow Mobil: +(90) 532 293 010 4
info@fluidsystems.org Zhejiang Province Flux Pumps India Pvt. Ltd. speck@speckpompa.com.tr
427/A-2, Gultekdi Industrial Estate Tel. / Fax: +48 126 455 684
www.fluidsystems.org Tel.: +86 573 847 312 98 biuro@krupinski.krakow.pl www.speckpompa.com.tr
Fax: +86 573 847 312 88 Near Prabhat Printing Press
Pune 411 047, Maharashtra www.krupinski.krakow.pl
Kln steveche@speck-pumps.cn
www.speck-pumps.cn Tel.: +91 020 2427 1023 USA USA
Arpuma GmbH Fax: +91 020 2427 0689 Speck Pumpen Subsidiary
Ottostrasse 10 Mobile: +91 98504 03114 RC Taiwan Speck Industries LP
50170 Kerpen CZ Czech Republic kiran.kadam@flux-pumps.in Speck Pumpen Subsidiary 301 Veterans Blvd
Tel.: +49 2273 953 300 0 Sigmet spol s.r.o. www.flux-pumps.in Rutherford
Fax: +49 2273 953 300 20 Kosmonautu .p. 1103/6a Speck Pumps Technology Taiwan Ltd. NJ 07070
info@arpuma.de 77200 Olomouc 2Fl., no. 153, Sec. 2
www.arpuma.de Tel.: +420 585 231 070
J Japan Datong Rd., Xizhi District Tel.: +1 201 569 3114
Fax: +1 201 569 9607
Fax: +420 585 227 072 Rodateq, Inc. New Taipei City info@speckamerica.com
Suite 301 Oka Bldg. Tel.: +886 286 926 220
International sigmet@sigmet.cz
www.sigmet.cz 2 - 1 - 16 Kyomachibori, Nishiku Fax: +886 286 926 759 www.speckamerica.com
550 0003 Osaka Mobile: +886 936 120 952
Tel.: +81 664 441 940 speck886@ms32.hinet.net ZA Rep. South Africa
A Austria DK Denmark Fax: +81 664 449 050 www.speck-pumps.com.tw AQUAPUMP ( Pty ) Ltd.
Tuma Pumpensysteme GmbH Pumpegruppen a/s info@rodateq.co.jp Unit 54
Eitnergasse 12 Lundtoftegrdsvej 95 www.rodateq.co.jp RCH Chile APD Industrial park
1230 Wien 2800 Lyngby Kelvin street
Tel.: +43 191 493 40 Tel.: +45 459 371 00 Rodateq, Inc. W & F Ingenieria Y Maquinas S.A. Kya Sand
Fax.: +43 191 414 46 Fax: +45 459 347 55 Tokyo Branch Felix de Amesti 90, Piso 6 Tel.: +27 117 080 600
contact@tumapumpen.at info@pumpegruppen.dk No. 408, 3 - 22 - 12 Las Condes, Santiago Fax: +27 865 864 151
www.tumapumpen.at www.pumpegruppen.dk Highashi Ikebukuro, Toshima - ku Tel.: +56 220 629 43 Mobile: +27 824 509 078
170-0013 Tokyo Fax: +56 220 630 39 cliff@aquapump.co.za
rwendler@tie.cl
AUS Australia E Spain Tel.: +81 359 798 818 www.aquapump.co.za
Pump Solutions Australasia Fax: +81 359 798 817
Unit 1
Speck Pumpen Subsidiary roda-t@yo.rim.or.jp RI Indonesia
7 Bessemer Way SPECK BOMBAS INDUSTRIALES, S.L.U. www.rodateq.co.jp PT Roda Rollen Indonesia
Wangara, WA 6065 Trafalgar, 53 despacho 6 Kompleks Pertokoan Glodok
P.O. Box 1811 Centro de Negocios CNAF Jaya No. 30
Wangara DC, WA 6947 46023 Valencia L Luxembourg Jl. Hayam Wuruk,
Tel.: +61 8 9408 1544 Tel.: +34 963 811 094 Heat transfer pumps / Pompes pour Jakarta - Pusat
Fax: +61 8 9408 1644 Fax: +34 963 811 096 fluid thermique Indonesia, 11180
mike@pumpsolutions.com.au Mobile: +34 618 376 241 FLOWMOTION BVBA Tel.: +6221 659 922 528
www.pumpsolutions.com.au speck-spain@terra.com Mergelweg 3 Fax: +6221 380 595 9
www.speck.de 1730 Asse rudy@rodarollenindonesia.com
Pump Systems Australia Tel.: +32 2 309 67 13
Factory 2
F France
Fax. +32 2 309 69 13
info@flowmotion.be
ROK Corea
21 London Drive J.C. International Inc.
Bayswater /Melbourne Speck Pumpen Subsidiary www.flowmotion.be
2F, Bikeum Bldg. 108,
Victoria 3153 Speck Pompes Industries S.A. Yanghwa-Ro, Mapo-Gu,
Tel.: +61 397 623 100 Z.I. Parc dActivits du Ried MAL Malaysia 121-893 Seoul
Fax: +61 397 623 188 4, rue de lEnergie Leesonmech Tel.: +82 232 628 00
sales@pumpsystemsaustralia.com.au B.P. 227 Engineering ( M ) Sdn. Bhd. Fax: +82 232 569 09
67727 Hoerdt Cedex No. 18 Jalan 18, Taman Sri Kluang, jclee@jcint.co.kr
Tel.: +33 3 88 68 26 60 86000 Kluang, Johor www.jcint.co.kr Edicin
Fax: +33 3 88 68 16 86 Tel.: +607 777 105 5
info@speckpi.fr Fax: +607 777 106 6 Edition
sales@leesonmech.com
www.leesonmech.com
10/2015
09_15

reemplaza edicin
Produktion / Verwaltung Speck Pumpen Walter Speck GmbH & Co. KG Tel.: +49 9171 809 0 info@speck.de
D Production / Administration Speck Pumpen Systemtechnik GmbH Fax: +49 9171 809 10 www.speck.de replaces edition
Speck Pumpen Vakuumtechnik GmbH
Regensburger Ring 6 8, 91154 Roth 06/2015

31
 10/2015 1096.0998

Speck Pumpen Vakuumtechnik GmbH

Postfach 1453 91142 Roth / Germany
Regensburger Ring 6 8 91154 Roth / Germany
Tel.: +49 (0) 91 71 809 - 0
Fax: +49 (0) 91 71 809 - 10
info@speck.de
www.speck.de