John Crane Italia SpA

Solaro manufacturing site

C.so Europa, 92
DESIGN DATA VESSEL COIL
DESIGN PRESSURE 50 8 kg/cm2 g
20020 Solaro (MI) - Italy

MODEL
MODELO : PLAN 52 GA-140493 820
SERIAL No.
N° DE SERIE
JC REF.
CODE

: 4000511940
ITEM No.
N°DE ARTÍCULO :
GPN
: ( * ) CÒDIGO ASME VIII Div.1 CÒDIGO : 89488106
( 2* ) 450 240 200 450 DESIGN TEMPERATURE 100 70 °C
MDMT -86 -86 °C
JC REF.
SHELL COIL
CARCASA SERPENTìN

175 M
DESIGN PRESSURE (PS)
PRESIÒN DE DISEÑO (PS) : 0 / 50 0/ 8 kg/cm2 g
JOINT EFFICIENCY 0.85 0.7
DESIGN TEMPERATURE (TS)
: -86 / 100 -86 / 70 18
CORROSION ALLOWANCE 0 0 mm
TEMPERATURA DE DISEÑO (TS) °C
TEST PRESSURE (PT)
PRESIÒN DE PRUEBA (PT) : 75 12 kg/cm 2 g
TEST PRESSURE DATE
FECHA DE PRESIÒN DE PRUEBA : C 3
VOLUME (V)
VOLUMEN (V)
X-RAY
RAYOS X
:
:
20
RT3
1
N.A.
lt
RAW AND CONSTRUCTION MATERIAL
DYE PENETRANT
: 100 100 1
ADDITIONAL INFORMATIONS
TINTURA PENETRANTE %
JOINT EFFICIENCY
EFICIENCIA DE LA JUNTA : 0.85 0.7
EMPTY WEIGHT
PESO VACÍO
WORKING PRESSURE
:
:
~230
( 3* )
kg
12
2
SHELL SA 312 TP316/L ND 8" SCH. 40
CAP SA 403 WP316/L ND 8" SCH. 40
PRESIÒN DE FUNCIONAMIENTO kg/cm2 g

12
SAFETY DEVICE RANGE OR SET PRESSURE
:
RANGO DEL DISPOSITIVO DE SEGURIDAD O PRESIÒN FIJA N.A. kg/cm2 g
12
COUNTRY OF ORIGIN
PRESIÒN DE PRECARGA : ITALY
YEAR
AÑO : kg/cm2 g
5 N 11
B COIL SA 789 S31803 1/2" OD x 0.065" thk.
7 5 FLANGES SA 182 F316/L, F51 S31803 ND 3/4"-1.1/2" W.N. CLASS #150/#600RF
12 PIPING SA 312 TP316/L, SA 790 S31803 ND 1/2"-3/4" SCH. 80
NAME PLATE B H FITTINGS SA 403 WP316/L B.W. SCH. 80

280
TUBING SA 213 TP316/L 1/2" OD x 0.065" thk.

190
14 O 50

150
13

900
PLUGS SA 182 F316/L -
STUDS SA193 B8M CLASS 2 -
E HIGH LEVEL 18 NUTS SA194 8M -
DETAIL "A" NORMAL LEVEL GASKETS SS 316/L + GRAPHOIL SPIRAL WOUND

500
EARTHING BOSS L 6 8
GENERIC BOLTS STAINLESS STEEL -
30 35
6 mm fillet weld 4 350
STANCHION CARBON STEEL -
LOW LEVEL
INSTRUMENTATION AND COMPONENTS

400
Complete thread

700
of 30 mm for all
O 40

bosses I
DETAIL "A" A

600
ITEM Q.TY DESCRIPTION MANUFACTURER CONNECTION MATERIALS GPN

550
7

MAX 2550
1 1 PRESSURE INDICATOR WIKA 1/2" NPT/M AISI 316L 89489467
M 10

C
MATERIAL OF BOSS: 12 2 1 OVER PRESSURE DEVICE WIKA 1/2" NPT/M x NPT/F AISI 316 89489504

400
B

250
Stainless Steel
180 15
350

60 MATERIAL: 17 3 1 PRESSURE TRANSMITTER EMERSON 1/2" NPT/F AISI 316 89489539

Stainless steel 4 1 DIFFERENTIAL PRESSURE TRANSMITTER EMERSON FL AISI 316 89489624
9 16 5 2 2 VALVE MANIFOLD PARKER 1/2" NPT/F - 6000 PSI AISI 316L 87231814
B
6 1 5 VALVE MANIFOLD PARKER 1/2" NPT/F FL - 6000 PSI AISI 316L 87231796
C 7 4 COMPRESSION FITTING MALE PARKER 1/2" OD x NPT/M AISI 316 87229051
240 300

2030
B

102
8 1 REFLEX LEVEL GAUGE KLINGER - AISI 316 89500700
B C 10 O 9 1 TEMPERATURE INDICATOR WIKA 1/2" NPT/M AISI 316 Ti 89489651
1850

B 70 70 10 1 THERMOWELL WIKA 1 1/2" FL #600 x 1/2" NPT/F AISI 316/L 89489529

3D VIEW 12 q 80
11
12 6
1 FLOW ORIFICE
GATE VALVE
JC STD
OMB
3/4" FL #600 RF
3/4" B.W. - 800lb
AISI 316/L
AISI 316/L
87229324
87233869
13 1 Y-FILTER JC STD 3/4" B.W. - 800lb AISI 316/L 87230754
14 1 NON RETURN VALVE OMB 3/4" B.W. - 800lb AISI 316/L 87232731
15 1 NAMEPLATE JC STD - AISI 304 89112351
C C 16 1 JC LOGO JC STD - AISI 304 89039531

1270
1210
B B G D F 17 2 INSTRUMENT SUNSHADE INTERTEC - GRP 89277224
18 1 INSTRUMENT SUNSHADE INTERTEC (PARKER) - GRP 89267902
150 150 19
20
C
TERMINATION AND INTERNAL CONNECTION POINTS

860
B
ITEM Q.TY SERVICE SIZE TYPE AND RATING
A 1 PRUDUCT INLET - FROM MECHANICAL SEAL 3/4" FLANGED W.N. CLASS #600 RF-125/250AARH
B 1 PRODUCT OUTLET - TO MECHANICAL SEAL 3/4" FLANGED W.N. CLASS #600 RF-125/250AARH

15
C 1 VENT 3/4" FLANGED W.N. CLASS #600 RF-125/250AARH
D 1 DRAIN - BLINDED 3/4" FLANGED W.N. CLASS #600 RF-125/250AARH
175 25 175 175 25 E 1 FILLING - BLINDED 3/4" FLANGED W.N. CLASS #600 RF-125/250AARH
F 1 COOLING WATER INLET 3/4" FLANGED W.N. CLASS #150 RF-125/250AARH
25 225 125 25 400 G 1 COOLING WATER OUTLET 3/4" FLANGED W.N. CLASS #150 RF-125/250AARH
400 H 1 CONNECTION ON VESSEL (LINKED TO "J") 3/4" FLANGED W.N. CLASS #600 RF-125/250AARH
I 1 CONNECTION ON VESSEL (LINKED TO "K") 3/4" FLANGED W.N. CLASS #600 RF-125/250AARH
J 1 DPT PRESSURE CONNECTION ("L" OR "-") 1/2" NPT/F
B K 1 DPT PRESSURE CONNECTION ("H" OR "+") 1/2" NPT/F
7 L 1 DPT ELECTRICAL CONNECTION 1/2" NPT/F
J O 22 M 1 PT ELECTRICAL CONNECTION 1/2" NPT/F
200 No. 4 Holes
TECHNIP ITALY S.p.A. N 2 FLOW ORIFICE CONNECTION 3/4" FLANGED W.N. CLASS #600 RF-125/250AARH
PROJ.: ETILENO XXI
CLIENT: BRASKEM IDESA SAPI
VENDOR DOCUMENT REVIEW
O 1 THERMOWELL CONNECTION 1.1/2" FLANGED W.N. CLASS #600 RF-125/250AARH
K
1 REVISE AND RESUBMIT

TO BE ISSUED AS FINAL PROVIDED

P
200

MATERIAL REQUISITION 2
COMMENTS ARE INCORPORATED
MAX 600

7 2408-0000-MR 0 9 5 0 0 1
3 NO COMMENT – FINAL ISSUE

ITEM: 20-SP-2802 A/B 4 FOR INFORMATION ONLY

SR Doc. CODE: A0103 - A1112 - A2001

MS - May 30, 2013
CLIENT Doc. CODE: EXXI-4130-00-00-VD-DGA-0005
PURCHASE ORDER N.: 2408A0108
150

B C M.S. F.MO. M.S. LAYOUT REVISION [ Tl ] 08/05/13

Serial Item N°
Working Alarm
Barrier Fluid
Cooling Water B M.S. F.MO. M.S. REVISED WHERE"B" 04/04/13
(*) (2*)
Pressure
kg/cm2 g ( 3* )
Pressure (L)
kg/cm2 g ( 4* )
( 6* )
Flow Rate
l/min MAX 1300 A M.S. F.MO. M.S. FIRST ISSUE 15/02/13
25512 20-SP-2802 A 0 0.7 (RISING) n-Propyl Alcohol 5 ISS PREP'D CHK'D APPR'D DESCRIPTION DATE
25513 20-SP-2802 B 0 0.7 (RISING) n-Propyl Alcohol 5 C
PROJECT Etileno XXI DESCRIPTION
DIMENSIONAL NOTES:
- CIRCLED DIMENSIONS ARE SUBJECT TO CUSTOMER APPROVAL. OTHER DIMENSIONS ARE FOR INTERNAL REFERENCE (NOMINAL)
TOLERANCES (mm) (UNLESS OTHERWISE STATED)

VALUE
CUSTOMER
ENGINEERING
Technip
Technip API 682 - PLAN 52
- INSTRUMENTS GRAPHICAL REPRESENTATION IS ONLY FOR REFERENCE AND COULD CHANGE ACCORDING TO MANUFACTURER STANDARD GENERAL ±10 END USER Braskem - Idesa S.A.P.I. CONFIGURATION GPN / CODE DRG. LOC. DESIGN AUTH. SCALE
- ALL INSTRUMENTS, VALVES AND PIPEWORK MUST BE ADEQUATELY SUPPORTED TO ELIMINATE VIBRATION PROBLEMS. CONNECTIONS "A" & "B" ±5 LOCATION Mexico
FIXING HOLES ±2 JC REF. No. - G.27 89488106 IT02EN IT02EN //
PROJECTION MAXIMUM 500 MM PIPE RUN BETWEEN BRACKETS REFER TO JOHN CRANE DESIGN AND INSPECTION SHEET DRAWING No. ISSUE
ANGULAR ±2° JOB No. 4000511940
Seal Support
All intellectual property rights (including but not limited to copyright and design rights whether registered or unregistered) in relation to this drawing together with the information contained in this drawing (including but not limited to know-how and confidential information) is proprietary to John Crane. Reproduction (whether in whole or in part)
or use in any way whatsoever of this drawing or of any information contained therein is prohibited except with the prior written consent of John Crane. All rights in relation to this drawing are reserved. System GA-140493 C
A0
 REFERENCE CODES & STANDARDS
B ASME VIII Div.1 for Vessel ASME B16.5 for Flanges -
ASME IX for Welding API 682 3°Ed. -
ITEMN PI PT LG DPT TI FO
20-SP-2802 A 20-PI-285601A 20-PT-285602A 20-LG-285601A 20-LT-285602A 20-TI-285601A 20-RO-285601A
INSPECTION AND TESTING
20-SP-2802 B 20-PI-285601B 20-PT-285602B 20-LG-285601B 20-LT-285602B 20-TI-285601B 20-RO-285601B
PI TEST PRESSURE (30 MINUTES)
VESSEL
75
COIL
12 kg/cm2 g
X-RAY RT3 N.A. ON ALL SIZES
VENT
PT OVERPRESS.
DEVICE
DYE PENETRANT
FUNCTIONAL TEST (30 MINUTES)
100
NO
100 %
3/4" W.N. CLASS#600RF 125÷250 AARH PMI YES AS PER PROJECT SPEC. "EXXI-040-00-00-PI-SPC-003"
FERRITE NO
LOW PRESSURE INTEGRITY TEST YES
LIFTING TEST NO
FO SURFACE FINISH
STAINLESS STEEL PICKLING AND PASSIVATION
CARBON STEEL PAINTING AS PER PROJECT SPEC. "EXXI-040-00-00-PI-DEG-0012"
FILLING / Blind Flange
3/4" W.N. CLASS#600RF 125÷250 AARH WEIGHTS AND VOLUMES
LG TOTAL VOLUME ( VESSEL / COIL )
OPERATING VOLUME ( VESSEL )
~ 20 / 1
~ 20
lt
lt
B EMPTY WEIGHT ~ 230 kg
3/4" W.N. CLASS#600RF 125÷250 AARH
B FULL WEIGHT ~ 250 kg

FROM MECHANICAL SEAL CERTIFICATION

- PRESSURE RETAINING PARTS SUPPLIED WITH CERTIFICATE EN 10204-3.1
-
3/4" W.N. CLASS#600RF 125÷250 AARH -
TO MECHANICAL SEAL
TW TI -
ADDITIONAL NOTES
- DESIGN TEMPERATURE IS CONSIDERED FOR MECHANICAL CALCULATION ONLY
- REFER TO JOHN CRANE QUALITY PLAN FOR CERTIFICATES AND DOCUMENTATION
C.W. IN C.W. OUT -
-
3/4" W.N. CLASS#150RF 125÷250 AARH 3/4" W.N. CLASS#150RF 125÷250 AARH -

DRAIN / Blind Flange

3/4" W.N. CLASS#600RF 125÷250 AARH
LT

SEAL LOOP INSTALLATION NOTES:

- ALWAYS USE LONG SWEPT BENDS AND KEEP FITTINGS TO A MINIMUM
- SEAL CHAMBER AND MECHANICAL SEAL LOOP MUST BE FULLY VENTED ON INITIAL FILLING. JC RECOMMENDS THE USE OF A 3 WAYS VALVE ON THE MECHANICAL SEAL LOOP
- SUPPLIER TO ROUTE PIPEWORK/TUBING IN "BEST" POSITION TO FACILITATE ASSEMBLY AND MAINTENANCE, LOGIC MUST FOLLOW P&ID
- DO NOT USE HORIZONTAL RUNS, WHICH SHOULD RISE BY AT LEAST 5° TO ALLOW BLEED OF ANY ENTRAPPED AIR BACK TO VENT VALVE C M.S. F.MO. M.S. LAYOUT REVISION [ Tl ]
- SEAL LOOP PIPEWORK/TUBING SHOULD BE MINIMUM 3/4" NB (20 mm) 08/05/13
- ALL DOTTED PIPEWORK IS NOT OF JOHN CRANE SUPPLY. P&ID DIAGRAM OF PIPEWORK LOOP IS FOR ILLUSTRATION ONLY AND IS NOT TO BE USED FOR ANY OTHER PURPOSE B M.S. F.MO. M.S. REVISED WHERE"B" 04/04/13
- THE SEAL SUPPORT SYSTEM SHOULD BE MOUNTED AT A MAXIMUM OF 1000 MM (40 in) FROM THE SEAL CHAMBER. THE SUPPLY AND RETURN PIPEWORK SHOULD HAVE A M.S. F.MO. M.S. FIRST ISSUE 15/02/13
NO MORE THAN 6 BENDS IN TOTAL ISS PREP'D CHK'D APPR'D DESCRIPTION DATE
- TOTAL EQUIVALENT PIPE LENGTH OF THE INTERCONNECTING PIPING FOR DYNAMIC OPERATION OF SEAL SHOULD BE LESS THAN 5 METERS (16 ft) PROJECT Etileno XXI DESCRIPTION
GENERAL NOTES:
- THE NATURE OF FABRICATED EQUIPMENT IS SUCH THAT DIMENSIONS ARE DIFFICULT TO MAINTAIN. THE OVERALL SPACE ENVELOPE DIMENSIONS ARE CONSIDERED MAXIMUM.
CUSTOMER
ENGINEERING
Technip
Technip API 682 - PLAN 52
ALL OTHER DIMENSIONS ARE FOR GUIDANCE WITH THE INTENTION OF BEING ACHIEVED. IT MAY THEREFORE BE NECESSARY TO PRODUCE A FINAL "AS BUILT" DRAWING UPON COMPLETION. END USER Braskem - Idesa S.A.P.I. CONFIGURATION GPN / CODE DRG. LOC. DESIGN AUTH. SCALE
- USE OF PTFE IS FORBIDDEN, LOCTITE 577 OR EQUIVALENT MUST BE USED. SYSTEM TO BE FLUSHED PRIOR TO DESPATCH. LOCATION Mexico
- TERMINATION POINTS TO BE SUITABLY PROTECTED AGAINST INGRESS OF DIRTY AND MOISTURE FOR TRANSPORTATION. ASSEMBLY AND JC REF. No. - G.27 89488106 IT02EN IT02EN //
PROJECTION DRAWING No. ISSUE
INSTALLATION MUST BE IN ACCORDANCE WITH P&ID AND J.C. INSPECTION DOCUMENT JOB No. 4000511940
Seal Support
All intellectual property rights (including but not limited to copyright and design rights whether registered or unregistered) in relation to this drawing together with the information contained in this drawing (including but not limited to know-how and confidential information) is proprietary to John Crane. Reproduction (whether in whole or in part)
or use in any way whatsoever of this drawing or of any information contained therein is prohibited except with the prior written consent of John Crane. All rights in relation to this drawing are reserved. System GA-140493 C
A0