QIG TPE-224WS (Spanish)
QIG TPE-224WS (Spanish)
QIG TPE-224WS (Spanish)
TPE-224WS
Table ofofContents
Table Contents
Español ..................................................................................................... 1
1. Antes de iniciar .................................................................................. 1
2. Instalación del Hardware ................................................................... 2
3. Herramienta de gestión Web ............................................................. 3
Troubleshooting ........................................................................................ 6
Version 03.13.2006
1. Antes de iniciar
TPE-224WS
Guía de instalación rápida
CD-ROM de la herramienta
2 abrazaderas para cable con tornillos
Cable de alimentación AC
Aplicación
Advanced Wireless Pan & Tilt Power over Ethernet 108Mbps 802.11g
Internet Camera Server (PoE) Splitter Hot-Spot Access Point
(TV-IP400W) (TPE-102S) (TEW-453APB)
108Mbps 802.11g
Hot-Spot Access Point
(TEW-453APB)
26-Port 10/100/1000Mbps
Gigabit Web Smart
PoE Switch
(TPE-224WS)
Advanced Day/Night Power over Ethernet
Internet Camera Server (PoE) Splitter
(TV-IP300) (TPE-102S)
108Mbps 802.11g Power over Ethernet Power over Ethernet Advanced Wireless Day/Night
Wireless Access Point (PoE) Splitter (PoE) Splitter Internet Camera Server)
(TEW-450APB) (TPE-102S) (TPE-102S) (TV-IP300W)
1
Español
2. Instalación del Hardware
2
Español
3. Herramienta de gestión Web
Nota: Si desea descubrir con facilidad todos los Enrutadores de Gestión Web
en la red, asigne la dirección IP, cambie la contraseña, y actualice el nuevo
firmware, después instale la Web Management Utility (Herramienta de gestión
Web). Siga los pasos que aparecen a continuación.
3
Español
4. Haga clic en Discovery
(Descubrir) y después haga doble
clic en el Switch (Enrutador) que
aparece en la “Discovery List”.
6. Establezca la configuración de la
IP Address (Dirección IP), Subnet
mask (Máscara de subred),
Gateway y Password
(Contraseña). Haga clic en Set
(Establecer).
4
Español
7. Haga clic en OK.
9. Escriba su Password
(Contraseña) y después haga clic
en Login (Iniciar).
Para obtener información más detallada sobre la configuración así como de las
configuraciones avanzadas del TPE-224WS , por favor consulte la sección de
resolución de problemas, el CD-ROM de la Guía del Usuario, o el sitio Web de
Trendnet en http://www.trendnet.com.
5
Español
Troubleshooting
Q1: After connecting the TPE-224WS to a power outlet, the LEDs do not turn on.
A1: Check the connection of the power cord to the TPE-224WS and the power outlet. Also
check that the power outlet is receiving power.
Q2: After installing the Web-Management Utility, I clicked Discovery and the Utility is unable to
discover the TPE-224WS. What should I do?
A2: Make sure that the TPE-224WS is powered on and that all connections are secure. Also
check that your computer's IP Address is on the same network segment as the TPE-224WS.
The default IP Address of the TPE-224WS is http://192.168.0.1 and the default password is
"admin".
Q3: When I access the TPE-224WS using a web browser, I get a screen that tells me “only one
user can login”. What should I do?
A3: Another computer is configuring the TPE-224WS. Please wait until the user logs off. If the
other user has already logged off and you still get the same screen, then disconnect the power
cord from the TPE-224WS, wait for 5 seconds, reconnect the power cord to the TPE-224WS,
allow 5 seconds for the switch to power on, and then attempt to access the web configuration
page to login.
Q4: When I connect a computer to the switch's port, the LINK/ACT LED turns on, but the
100Mbps LED remains off.
A4: When the 100Mbps LED remains off, the computer's connection speed is 10Mbps.
Q5: I connected a Power-over-Ethernet (PoE) device into the switch's PoE port, but the PoE
Status LED remains off.
A5: Check the connections between the PoE port and the PoE device. Make sure that the
CAT-5 cable is properly inserted into the PoE port and PoE device.
If you still encounter problems or have any questions regarding the TPE-224WS, please refer to the
User's Guide included on the Utility CD-ROM or contact Trendnet's Technical Support Department.
Certifications
This equipment has been tested and found to comply with FCC and CE Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received. Including interference that may cause
undesired operation.
Waste electrical and electronic products must not
be disposed of with household waste. Please
recycle where facilities exist. Check with you Local
Authority or Retailer for recycling advice.
6
TRENDnet Technical Support
US/Canada Support Center European Support Center
Contact Contact
Telephone: 1(866) 845-3673 Telephone:
Email: support@trendnet.com Deutsch : +49 (0) 6331 / 268-460
Français : +49 (0) 6331 / 268-461
Tech Support Hours 0800-90-71-61 (numéro vert)
24/7 Toll Free Tech Support Español : +49 (0) 6331 / 268-462
English : +49 (0) 6331 / 268-463
Italiano : +49 (0) 6331 / 268-464
Dutch : +49 (0) 6331 / 268-465
Fax: +49 (0) 6331 / 268-466