Cálculo Hidráulico para ACI de

la Nueva Planta Farmagro

CÁLCULO HIDRÁULICO PARA ACI DE

LA NUEVA PLANTA FARMAGRO
HUACHIPA - ESTE

Agosto 2018
 Cálculo Hidráulico para ACI de
la Nueva Planta Farmagro

1. Objetivos:
El presente documento posee como objetivo la descripción del Cálculo Hidráulico
realizado, mediante software especializado, para verificar el diseño de las redes
integrales de Agua Contra Incendio.

2. Alcance:
Los Cálculos Hidráulicos se realizaron en base a la información gráfica de los
planos de los Almacenes de Productos Terminados, en su sección media,
puesto que existen dos acometidas con redes independientes para ACI 1 en este
edificio y una acometida con red independiente para ECI 2. El Cálculo Hidráulico
realizado se ha realizado en referencia a la zona que mayores adversidades
hidráulicas presenta en el sistema completo, siendo suficiente la verificación de
dicha área. En el caso de la Nueva Planta Farmagro dicha zona es el Almacén
de Productos Terminados, que se encuentra a mayor altura y distancia de la
bomba de ACI.

En la siguiente imagen se muestra la línea que conduce, desde la tubería que

sube de la bomba, hacia la red más desfavorable en los Almacenes de Productos
Terminados.

1
Agua Contra Incendio
2
Espuma Contra Incendio

Agosto 2018
 Cálculo Hidráulico para ACI de
la Nueva Planta Farmagro

3. Normativa y Reglamentos:
- NFPA 13: Standard for installation of sprinkler system.
- NFPA 14: Standard for the installation of standpipe and hose system.
- NFPA 20: Standard for the installation of stationary pumps for fire protection.
- Reglamento Nacional de Edificaciones – Norma A.130.
- Estudio de Riesgos de Incendio y Explosión para la Nueva Planta Farmagro
Huachipa Este – ESSAC.

4. Estudio de Riesgos de Incendio y Explosión:

En base a los estudios realizados por ESSAC Engineering Services S.A.C.,

plasmados en el entregable ES-18-001507-ASE-ER-001-00, se tiene la siguiente
información de la zona en estudio:

Almacén de producto terminado

El proyecto considera el almacenamiento de los siguientes materiales dentro del

almacén: Líquidos inflamables y combustibles, sólidos inflamables y
combustibles, materiales inertes, productos terminados (considerados como
sustancias y objetos peligrosos varios – misceláneos).

La altura máxima del techo y de la carga almacenada será de 14.85 m y 8.4 m,

respectivamente. La forma de almacenamiento será en racks, alcanzando los 7
niveles de altura.

Almacén de Productos Terminados - Área en estudio

Láminas ISS-APT-08 e ISS-APT-09 Proyecto Nueva Planta Farmagro

Agosto 2018
 Cálculo Hidráulico para ACI de
la Nueva Planta Farmagro

6" 6"

2 1/2" 2 1/2" 2 1/2"

2 1/2" 2 1/2" 2 1/2"

2 1/2" 2 1/2" 2 1/2"

Nodos de prueba

2 1/2" 2 1/2" 2 1/2"

2 1/2" 2 1/2" 2 1/2"

2 1/2" 2 1/2" 2 1/2"

2 1/2" 2 1/2" 2 1/2"

6" 6"

Nodos de la Red de ACI hidráulicamente más exigida localizada en el

Almacén de Productos terminados del Proyecto Nueva Planta Farmagro

Agosto 2018
 Cálculo Hidráulico para ACI de
la Nueva Planta Farmagro

5. Cálculo Hidráulico:

En función a las consideraciones indicadas en el Estudio de Riesgos de Incendio

y Explosión, se procederá a realizar los cálculos hidráulicos del sistema,
tomando en cuenta los siguientes criterios de cálculo:

a) Para calcular las pérdidas por fricción, se usará el método de Hazen-

Williams, el que se resume por la siguiente fórmula:

4.52 𝑄𝑄1.85
𝑃𝑃𝑃𝑃 =
𝐶𝐶 1.85 . 𝑑𝑑4.87
Dónde:
Pd = Pérdida por Fricción (p.s.i./pie).
Q = Caudal de agua (gpm).
C = Coeficiente de fricción del material
d = Diámetro interno de la tubería (pulg).

b) Para los valores del coeficiente de fricción C, se ha tomado en cuenta que

la tubería de las redes de ACI serán de Acero SCH 40.

c) Las fórmulas para el cálculo de presiones de velocidad son las siguientes:

0.001132 𝑄𝑄 2
𝑃𝑃𝑃𝑃 =
𝑑𝑑4
Dónde:
Pv = Presión de Velocidad (p.s.i.)
Q = Caudal de agua (gpm)
d = Diámetro interno de la tubería (pulg.)

Pn = Pt - Pv
Donde:
Pn = Presión Normal (psi)
Pt = Presión Total (psi)
Pv = Presión de Velocidad (psi)

d) Se usará la presión total para el cálculo, cuando se haya determinado que

no se realizará el cálculo considerando el ajuste por presión de velocidad.

e) El cálculo hidráulico se realiza considerando las diferencias de elevación

entre los diferentes nodos.

f) El cálculo hidráulico se realizará siguiendo el procedimiento indicado en

la NFPA 13, Capítulo 22 - Plans and calculations.

Agosto 2018
 Cálculo Hidráulico para ACI de
la Nueva Planta Farmagro

Reportes de los Cálculos Hidráulicos

Agosto 2018
 Sprinkler System Hydraulic Analysis

Hydraulic Calculations
for
ALMACEN PRODUCTO TERMINADO
Montante de 6 pulg - Tuberia HDPE 6 pulg
,

Contract # Date 07-08-2018

Design Data
Occupancy Classification Almacenamiento
Density , gpm/sq.ft
Area of Application , sq.ft
Coverage per Spr. , sq.ft
Special Sprinklers k22.4
No. of Spr. Calculated 12
In-rack Demand , gpm
Hose streams 250, gpm
Ttl.Wtr. Required, including hose streams 1964, gpm

Contractor
Designer

Date
, 17/08/2018 File: CH Almacen PT - montante de 6 pulg.clc Page 1
Calculation performed by SprinkCalc, Copyright © 2001 Tyco Fire Products
 Diagram
(Nodes: Numbering)

Job : ALMACEN PRODUCTO TERMINADO

src1

h9
h5 h10
h1 h6 h11
h2 h7 h12
h3 h8
h4
s1

Contractor:
Designer:
Authority Having Jurisdiction:
Date: 17/08/2018 File: CH Almacen PT - montante de 6 pulg.clc

Calculation performed by SprinkCalc, Copyright © 2001 Tyco Fire Products

Page 2
 Sprinkler System Hydraulic Analysis

Job : ALMACEN PRODUCTO TERMINADO

Node Data
Node# X Rs.Pres(Src) Rq.Pres. Ttl.Pres. Discharge
Type Y Stat.Pres(Src) Rq.Flow El.Pres. Density
K-Fact. Elev Flow@Rs.Pr(Src) Hose Coverage
n50 -39.37 0 0 104.207 0
Node 154.2 0 0 7.819 0
0 -4.92 0 0 0
n51 -39.37 0 0 108.899 0
Node 219.82 0 0 7.819 0
0 -4.92 0 0 0
s1 -6.56 0 0 98.314 250
Hose 154.2 0 0 9.952 0
0 0 0 250 0
n49 -6.56 0 0 101.295 0
Node 154.2 0 0 7.819 0
0 -4.92 0 0 0
n52 -177.17 0 0 116.958 0
Node 219.82 0 0 7.819 0
0 -4.92 0 0 0
n55 -223.1 0 0 124.205 0
Node 295.28 0 0 7.819 0
0 -4.92 0 0 0
src1 -223.1 0 0 132.453 -1963.571
Supply 295.28 0 0 0 0
0 -22.97 0 0 0
n53 -177.17 0 0 119.677 0
Node 259.19 0 0 7.819 0
0 -4.92 0 0 0
n54 -223.1 0 0 123.301 0
Node 259.19 0 0 7.819 0
0 -4.92 0 0 0
n47 -4.92 0 0 97.392 0
Node 154.2 0 0 9.952 0
0 0 0 0 0
n27 104.99 0 0 53.936 0
Node 90.55 0 0 29.287 0
0 44.62 0 0 0
n26 -1.64 0 0 60.108 0
Node 90.55 0 0 28.86 0
0 43.64 0 0 0
n25 -1.64 0 0 59.116 0
Node 90.55 0 0 29.287 0
0 44.62 0 0 0

Date 17/08/2018 File: CH Almacen PT - montante de 6 pulg.clc Page 3

Calculation performed by SprinkCalc, Copyright © 2001 Tyco Fire Products
 Sprinkler System Hydraulic Analysis

Job : ALMACEN PRODUCTO TERMINADO

Node Data (cont)

Node# X Rs.Pres(Src) Rq.Pres. Ttl.Pres. Discharge
Type Y Stat.Pres(Src) Rq.Flow El.Pres. Density
K-Fact. Elev Flow@Rs.Pr(Src) Hose Coverage
n28 104.99 0 0 53.796 0
Node 90.55 0 0 28.86 0
0 43.64 0 0 0
n31 104.99 0 0 54.135 0
Node 105.64 0 0 29.287 0
0 44.62 0 0 0
n30 -1.64 0 0 60.882 0
Node 105.64 0 0 28.86 0
0 43.64 0 0 0
n29 -1.64 0 0 59.833 0
Node 105.64 0 0 29.287 0
0 44.62 0 0 0
n20 104.99 0 0 53.318 0
Node 60.37 0 0 28.86 0
0 43.64 0 0 0
n19 104.99 0 0 53.393 0
Node 60.37 0 0 29.287 0
0 44.62 0 0 0
n18 -1.64 0 0 58.904 0
Node 60.37 0 0 28.86 0
0 43.64 0 0 0
n21 -1.64 0 0 58.501 0
Node 75.46 0 0 29.287 0
0 44.62 0 0 0
n24 104.99 0 0 53.591 0
Node 75.46 0 0 28.86 0
0 43.64 0 0 0
n23 104.99 0 0 53.691 0
Node 75.46 0 0 29.287 0
0 44.62 0 0 0
n22 -1.64 0 0 59.454 0
Node 75.46 0 0 28.86 0
0 43.64 0 0 0
n32 104.99 0 0 53.938 0
Node 105.64 0 0 28.86 0
0 43.64 0 0 0
n42 -1.64 0 0 64.097 0
Node 150.92 0 0 28.86 0
0 43.64 0 0 0

Date 17/08/2018 File: CH Almacen PT - montante de 6 pulg.clc Page 4

Calculation performed by SprinkCalc, Copyright © 2001 Tyco Fire Products
 Sprinkler System Hydraulic Analysis

Job : ALMACEN PRODUCTO TERMINADO

Node Data (cont)

Node# X Rs.Pres(Src) Rq.Pres. Ttl.Pres. Discharge
Type Y Stat.Pres(Src) Rq.Flow El.Pres. Density
K-Fact. Elev Flow@Rs.Pr(Src) Hose Coverage
n41 -1.64 0 0 62.775 0
Node 150.92 0 0 29.287 0
0 44.62 0 0 0
n40 104.99 0 0 54.071 0
Node 135.83 0 0 28.86 0
0 43.64 0 0 0
n43 104.99 0 0 54.557 0
Node 150.92 0 0 29.287 0
0 44.62 0 0 0
n46 -4.92 0 0 67.407 0
Node 154.2 0 0 28.86 0
0 43.64 0 0 0
n45 -1.64 0 0 65.752 0
Node 154.2 0 0 28.86 0
0 43.64 0 0 0
n44 104.99 0 0 54.085 0
Node 150.92 0 0 28.86 0
0 43.64 0 0 0
n35 104.99 0 0 54.298 0
Node 120.73 0 0 29.287 0
0 44.62 0 0 0
n34 -1.64 0 0 61.792 0
Node 120.73 0 0 28.86 0
0 43.64 0 0 0
n33 -1.64 0 0 60.668 0
Node 120.73 0 0 29.287 0
0 44.62 0 0 0
n36 104.99 0 0 54.027 0
Node 120.73 0 0 28.86 0
0 43.64 0 0 0
n39 104.99 0 0 54.434 0
Node 135.83 0 0 29.287 0
0 44.62 0 0 0
n38 -1.64 0 0 62.856 0
Node 135.83 0 0 28.86 0
0 43.64 0 0 0
n37 -1.64 0 0 61.641 0
Node 135.83 0 0 29.287 0
0 44.62 0 0 0

Date 17/08/2018 File: CH Almacen PT - montante de 6 pulg.clc Page 5

Calculation performed by SprinkCalc, Copyright © 2001 Tyco Fire Products
 Sprinkler System Hydraulic Analysis

Job : ALMACEN PRODUCTO TERMINADO

Node Data (cont)

Node# X Rs.Pres(Src) Rq.Pres. Ttl.Pres. Discharge
Type Y Stat.Pres(Src) Rq.Flow El.Pres. Density
K-Fact. Elev Flow@Rs.Pr(Src) Hose Coverage
n6 -1.64 0 0 57.907 0
Node 15.09 0 0 28.86 0
0 43.64 0 0 0
n5 -1.64 0 0 54.181 0
Node 15.09 0 0 29.287 0
0 44.62 0 0 0
n4 104.99 0 0 52.274 0
Node 0 0 0 28.86 0
0 43.64 0 0 0
h5 44.29 0 40 40.985 143.404
Head 15.09 0 141.67 29.287 0
22.4 44.62 0 0 0
h8 88.58 0 40 41.347 144.035
Head 15.09 0 141.67 29.287 0
22.4 44.62 0 0 0
h7 73.82 0 40 40.052 141.762
Head 15.09 0 141.67 29.287 0
22.4 44.62 0 0 0
h6 59.06 0 40 40.04 141.741
Head 15.09 0 141.67 29.287 0
22.4 44.62 0 0 0
h1 44.29 0 40 40.945 143.333
Head 0 0 141.67 29.287 0
22.4 44.62 0 0 0
n2 -1.64 0 0 57.859 0
Node 0 0 0 28.86 0
0 43.64 0 0 0
n1 -1.64 0 0 54.135 0
Node 0 0 0 29.287 0
0 44.62 0 0 0
h2 59.06 0 40 40 141.67
Head 0 0 141.67 29.287 0
22.4 44.62 0 0 0
n3 104.99 0 0 47.979 0
Node 0 0 0 29.287 0
0 44.62 0 0 0
h4 88.58 0 40 41.304 143.961
Head 0 0 141.67 29.287 0
22.4 44.62 0 0 0

Date 17/08/2018 File: CH Almacen PT - montante de 6 pulg.clc Page 6

Calculation performed by SprinkCalc, Copyright © 2001 Tyco Fire Products
 Sprinkler System Hydraulic Analysis

Job : ALMACEN PRODUCTO TERMINADO

Node Data (cont)

Node# X Rs.Pres(Src) Rq.Pres. Ttl.Pres. Discharge
Type Y Stat.Pres(Src) Rq.Flow El.Pres. Density
K-Fact. Elev Flow@Rs.Pr(Src) Hose Coverage
h3 73.82 0 40 40.011 141.69
Head 0 0 141.67 29.287 0
22.4 44.62 0 0 0
n7 104.99 0 0 48.031 0
Node 15.09 0 0 29.287 0
0 44.62 0 0 0
n13 -1.64 0 0 57.532 0
Node 45.28 0 0 29.287 0
0 44.62 0 0 0
n12 104.99 0 0 52.535 0
Node 30.18 0 0 28.86 0
0 43.64 0 0 0
n11 104.99 0 0 48.216 0
Node 30.18 0 0 29.287 0
0 44.62 0 0 0
n14 -1.64 0 0 58.45 0
Node 45.28 0 0 28.86 0
0 43.64 0 0 0
n17 -1.64 0 0 57.977 0
Node 60.37 0 0 29.287 0
0 44.62 0 0 0
n16 104.99 0 0 52.968 0
Node 45.28 0 0 28.86 0
0 43.64 0 0 0
n15 104.99 0 0 53.034 0
Node 45.28 0 0 29.287 0
0 44.62 0 0 0
n10 -1.64 0 0 58.081 0
Node 30.18 0 0 28.86 0
0 43.64 0 0 0
n9 -1.64 0 0 54.349 0
Node 30.18 0 0 29.287 0
0 44.62 0 0 0
n8 104.99 0 0 52.331 0
Node 15.09 0 0 28.86 0
0 43.64 0 0 0
h9 44.29 0 40 41.13 143.657
Head 30.18 0 141.67 29.287 0
22.4 44.62 0 0 0

Date 17/08/2018 File: CH Almacen PT - montante de 6 pulg.clc Page 7

Calculation performed by SprinkCalc, Copyright © 2001 Tyco Fire Products
 Sprinkler System Hydraulic Analysis

Job : ALMACEN PRODUCTO TERMINADO

Node Data (cont)

Node# X Rs.Pres(Src) Rq.Pres. Ttl.Pres. Discharge
Type Y Stat.Pres(Src) Rq.Flow El.Pres. Density
K-Fact. Elev Flow@Rs.Pr(Src) Hose Coverage
h12 88.58 0 40 41.5 144.302
Head 30.18 0 141.67 29.287 0
22.4 44.62 0 0 0
h11 73.82 0 40 40.197 142.018
Head 30.18 0 141.67 29.287 0
22.4 44.62 0 0 0
h10 59.06 0 40 40.185 141.997
Head 30.18 0 141.67 29.287 0
22.4 44.62 0 0 0

Date 17/08/2018 File: CH Almacen PT - montante de 6 pulg.clc Page 8

Calculation performed by SprinkCalc, Copyright © 2001 Tyco Fire Products
 Sprinkler System Hydraulic Analysis

Job : ALMACEN PRODUCTO TERMINADO

Pipe Data
Pipe# Size Length Fr.Resist. Rt.Flow Flow St.Node# Elev. St. X St. K-Fact. St Ttl.Pr.St. Rq.Pres. St.
Type Int.Diam. Fittings Fric.Pr.Loss Rt.Pres. Velocity NodeTypeSt. Hose St. Y St. Disch. St. El.Pres. St. Rq.Flow St.
Matl. HWC Eq.Len. El.Pr.Loss ChurnPres. Vel.Pres. End.Node# Elev. End X End K-Fact. End Ttl.Pr.End Rq.Flow End
Path Abs.Rough.Ttl.Len. Fix.Pr.Loss Flow Dir. NodeTypeEnd Hose End Y End Disch. End El.Pres. End Rq.Pres. End
fm11 10 18.04 0.01069 -1963.571 n55 -4.92 -223.1 0 124.205 0
FeedMain 10.02 n90ell -0.428 -7.99 Node 0 295.28 0 7.819 0
40 120 22 -7.819 0.43 src1 -22.97 -223.1 0 132.453 0
None 0.00181 40.04 Supply 0 295.28 -1963.571 0 0
fm10 10 36.09 0.01856 -1963.571 n54 -4.92 -223.1 0 123.301 0
FeedMain 8.219 n90ell -0.905 -11.87 Node 0 259.19 0 7.819 0
HDPE SDR9
150 12.66 0 0.949 n55 -4.92 -223.1 0 124.205 0
None 6E-5 48.75 Node 0 295.28 0 7.819 0
fm9 8 45.93 0.05426 -1963.571 n53 -4.92 -177.17 0 119.677 0
FeedMain 6.594 nTee -3.624 -18.45 Node 0 259.19 0 7.819 0
HDPE SDR9
150 20.86 0 2.29 n54 -4.92 -223.1 0 123.301 0
None 6E-5 66.79 Node 0 259.19 0 7.819 0
fm8 8 39.37 0.05426 -1963.571 n52 -4.92 -177.17 0 116.958 0
FeedMain 6.594 n90ell -2.718 -18.45 Node 0 219.82 0 7.819 0
HDPE SDR9
150 10.73 0 2.29 n53 -4.92 -177.17 0 119.677 0
None 6E-5 50.1 Node 0 259.19 0 7.819 0
fm7 8 137.8 0.05426 -1963.571 n51 -4.92 -39.37 0 108.899 0
FeedMain 6.594 n90ell -8.059 -18.45 Node 0 219.82 0 7.819 0
HDPE SDR9
150 10.73 0 2.29 n52 -4.92 -177.17 0 116.958 0
None 6E-5 148.52 Node 0 219.82 0 7.819 0
fm6 8 65.62 0.05426 -1963.571 n50 -4.92 -39.37 0 104.207 0
FeedMain 6.594 nTee -4.692 -18.45 Node 0 154.2 0 7.819 0
HDPE SDR9
150 20.86 0 2.29 n51 -4.92 -39.37 0 108.899 0
None 6E-5 86.48 Node 0 219.82 0 7.819 0
fm5 8 32.81 0.05426 -1963.571 n49 -4.92 -6.56 0 101.295 0
FeedMain 6.594 nTee -2.912 -18.45 Node 0 154.2 0 7.819 0
HDPE SDR9
150 20.86 0 2.29 n50 -4.92 -39.37 0 104.207 0
None 6E-5 53.67 Node 0 154.2 0 7.819 0
fm4 8 4.92 0.05426 -1963.571 s1 0 -6.56 0 98.314 0
FeedMain 6.594 n90ell -0.849 -18.45 Hose 250 154.2 250 9.952 0
HDPE SDR9
150 10.73 -2.133 2.29 n49 -4.92 -6.56 0 101.295 0
None 6E-5 15.65 Node 0 154.2 0 7.819 0
fm3 8 1.64 0.02516 -1713.571 n47 0 -4.92 0 97.392 0
FeedMain 7.981 nTee -0.922 -10.99 Node 0 154.2 0 9.952 0
40 120 35 0 0.813 s1 0 -6.56 0 98.314 0
None 0.00181 36.64 Hose 250 154.2 250 9.952 0
fm2 6 43.64 0.09578 -1713.571 n46 43.64 -4.92 0 67.407 0
FeedMain 6.065 1(nTee) 1(nBfly)
-11.0761(nSwing) -19.03 Node 0 154.2 0 28.86 0
40 120 72 -18.909 2.437 n47 0 -4.92 0 97.392 0
None 0.00181 115.63 Node 0 154.2 0 9.952 0

Date 17/08/2018 File: CH Almacen PT - montante de 6 pulg.clc Page 9

Calculation performed by SprinkCalc, Copyright © 2001 Tyco Fire Products
 Sprinkler System Hydraulic Analysis

Job : ALMACEN PRODUCTO TERMINADO

Pipe Data (cont)

Pipe# Size Length Fr.Resist. Rt.Flow Flow St.Node# Elev. St. X St. K-Fact. St Ttl.Pr.St. Rq.Pres. St.
Type Int.Diam. Fittings Fric.Pr.Loss Rt.Pres. Velocity NodeTypeSt. Hose St. Y St. Disch. St. El.Pres. St. Rq.Flow St.
Matl. HWC Eq.Len. El.Pr.Loss ChurnPres. Vel.Pres. End.Node# Elev. End X End K-Fact. End Ttl.Pr.End Rq.Flow End
Path Abs.Rough.Ttl.Len. Fix.Pr.Loss Flow Dir. NodeTypeEnd Hose End Y End Disch. End El.Pres. End Rq.Pres. End
f6 6 15.09 0.01355 -596.092 n24 43.64 104.99 0 53.591 0
Fmain 6.065 -0.205 -6.62 Node 0 75.46 0 28.86 0
40 120 0 0 0.295 n28 43.64 104.99 0 53.796 0
None 0.00181 15.09 Node 0 90.55 0 28.86 0
r15 2.5 0.98 0.04803 111.086 n30 43.64 -1.64 0 60.882 0
Rnppl 2.469 nTee 0.624 7.44 Node 0 105.64 0 28.86 0
40 120 12 0.427 0.373 n29 44.62 -1.64 0 59.833 0
None 0.00181 12.98 Node 0 105.64 0 29.287 0
b19 2.5 106.63 0.04366 105.516 n25 44.62 -1.64 0 59.116 0
Brline 2.469 2(n90ell) 5.179 7.07 Node 0 90.55 0 29.287 0
40 120 12 0 0.336 n27 44.62 104.99 0 53.936 0
None 0.00181 118.63 Node 0 90.55 0 29.287 0
r14 2.5 0.98 0.04366 -105.516 n28 43.64 104.99 0 53.796 0
Rnppl 2.469 nTee -0.567 -7.07 Node 0 90.55 0 28.86 0
40 120 12 0.427 0.336 n27 44.62 104.99 0 53.936 0
None 0.00181 12.98 Node 0 90.55 0 29.287 0
r16 2.5 0.98 0.04803 -111.086 n32 43.64 104.99 0 53.938 0
Rnppl 2.469 nTee -0.624 -7.44 Node 0 105.64 0 28.86 0
40 120 12 0.427 0.373 n31 44.62 104.99 0 54.135 0
None 0.00181 12.98 Node 0 105.64 0 29.287 0
f7 6 15.09 0.00945 -490.576 n28 43.64 104.99 0 53.796 0
Fmain 6.065 -0.143 -5.45 Node 0 90.55 0 28.86 0
40 120 0 0 0.2 n32 43.64 104.99 0 53.938 0
None 0.00181 15.09 Node 0 105.64 0 28.86 0
m7 6 15.09 0.05129 -1222.995 n26 43.64 -1.64 0 60.108 0
Cmain 6.065 -0.774 -13.58 Node 0 90.55 0 28.86 0
40 120 0 0 1.241 n30 43.64 -1.64 0 60.882 0
None 0.00181 15.09 Node 0 105.64 0 28.86 0
b20 2.5 106.63 0.04803 111.086 n29 44.62 -1.64 0 59.833 0
Brline 2.469 2(n90ell) 5.697 7.44 Node 0 105.64 0 29.287 0
40 120 12 0 0.373 n31 44.62 104.99 0 54.135 0
None 0.00181 118.63 Node 0 105.64 0 29.287 0
m5 6 15.09 0.03639 -1016.095 n18 43.64 -1.64 0 58.904 0
Cmain 6.065 -0.549 -11.28 Node 0 60.37 0 28.86 0
40 120 0 0 0.857 n22 43.64 -1.64 0 59.454 0
None 0.00181 15.09 Node 0 75.46 0 28.86 0
b18 2.5 106.63 0.04055 101.385 n21 44.62 -1.64 0 58.501 0
Brline 2.469 2(n90ell) 4.81 6.79 Node 0 75.46 0 29.287 0
40 120 12 0 0.311 n23 44.62 104.99 0 53.691 0
None 0.00181 118.63 Node 0 75.46 0 29.287 0

Date 17/08/2018 File: CH Almacen PT - montante de 6 pulg.clc Page 10

Calculation performed by SprinkCalc, Copyright © 2001 Tyco Fire Products
 Sprinkler System Hydraulic Analysis

Job : ALMACEN PRODUCTO TERMINADO

Pipe Data (cont)

Pipe# Size Length Fr.Resist. Rt.Flow Flow St.Node# Elev. St. X St. K-Fact. St Ttl.Pr.St. Rq.Pres. St.
Type Int.Diam. Fittings Fric.Pr.Loss Rt.Pres. Velocity NodeTypeSt. Hose St. Y St. Disch. St. El.Pres. St. Rq.Flow St.
Matl. HWC Eq.Len. El.Pr.Loss ChurnPres. Vel.Pres. End.Node# Elev. End X End K-Fact. End Ttl.Pr.End Rq.Flow End
Path Abs.Rough.Ttl.Len. Fix.Pr.Loss Flow Dir. NodeTypeEnd Hose End Y End Disch. End El.Pres. End Rq.Pres. End
f4 6 15.09 0.02317 -796.261 n16 43.64 104.99 0 52.968 0
Fmain 6.065 -0.35 -8.84 Node 0 45.28 0 28.86 0
40 120 0 0 0.526 n20 43.64 104.99 0 53.318 0
None 0.00181 15.09 Node 0 60.37 0 28.86 0
r11 2.5 0.98 0.04055 101.385 n22 43.64 -1.64 0 59.454 0
Rnppl 2.469 nTee 0.526 6.79 Node 0 75.46 0 28.86 0
40 120 12 0.427 0.311 n21 44.62 -1.64 0 58.501 0
None 0.00181 12.98 Node 0 75.46 0 29.287 0
r13 2.5 0.98 0.04366 105.516 n26 43.64 -1.64 0 60.108 0
Rnppl 2.469 nTee 0.567 7.07 Node 0 90.55 0 28.86 0
40 120 12 0.427 0.336 n25 44.62 -1.64 0 59.116 0
None 0.00181 12.98 Node 0 90.55 0 29.287 0
m6 6 15.09 0.0434 -1117.479 n22 43.64 -1.64 0 59.454 0
Cmain 6.065 -0.655 -12.41 Node 0 75.46 0 28.86 0
40 120 0 0 1.036 n26 43.64 -1.64 0 60.108 0
None 0.00181 15.09 Node 0 90.55 0 28.86 0
r12 2.5 0.98 0.04055 -101.385 n24 43.64 104.99 0 53.591 0
Rnppl 2.469 nTee -0.526 -6.79 Node 0 75.46 0 28.86 0
40 120 12 0.427 0.311 n23 44.62 104.99 0 53.691 0
None 0.00181 12.98 Node 0 75.46 0 29.287 0
f5 6 15.09 0.01813 -697.476 n20 43.64 104.99 0 53.318 0
Fmain 6.065 -0.274 -7.75 Node 0 60.37 0 28.86 0
40 120 0 0 0.404 n24 43.64 104.99 0 53.591 0
None 0.00181 15.09 Node 0 75.46 0 28.86 0
r17 2.5 0.98 0.0537 117.99 n34 43.64 -1.64 0 61.792 0
Rnppl 2.469 nTee 0.697 7.91 Node 0 120.73 0 28.86 0
40 120 12 0.427 0.421 n33 44.62 -1.64 0 60.668 0
None 0.00181 12.98 Node 0 120.73 0 29.287 0
m10 6 15.09 0.08224 -1578.193 n38 43.64 -1.64 0 62.856 0
Cmain 6.065 -1.241 -17.53 Node 0 135.83 0 28.86 0
40 120 0 0 2.067 n42 43.64 -1.64 0 64.097 0
None 0.00181 15.09 Node 0 150.92 0 28.86 0
b23 2.5 106.63 0.06927 135.378 n41 44.62 -1.64 0 62.775 0
Brline 2.469 2(n90ell) 8.217 9.07 Node 0 150.92 0 29.287 0
40 120 12 0 0.554 n43 44.62 104.99 0 54.557 0
None 0.00181 118.63 Node 0 150.92 0 29.287 0
f9 6 15.09 0.00295 -261.5 n36 43.64 104.99 0 54.027 0
Fmain 6.065 -0.044 -2.9 Node 0 120.73 0 28.86 0
40 120 0 0 0.057 n40 43.64 104.99 0 54.071 0
None 0.00181 15.09 Node 0 135.83 0 28.86 0

Date 17/08/2018 File: CH Almacen PT - montante de 6 pulg.clc Page 11

Calculation performed by SprinkCalc, Copyright © 2001 Tyco Fire Products
 Sprinkler System Hydraulic Analysis

Job : ALMACEN PRODUCTO TERMINADO

Pipe Data (cont)

Pipe# Size Length Fr.Resist. Rt.Flow Flow St.Node# Elev. St. X St. K-Fact. St Ttl.Pr.St. Rq.Pres. St.
Type Int.Diam. Fittings Fric.Pr.Loss Rt.Pres. Velocity NodeTypeSt. Hose St. Y St. Disch. St. El.Pres. St. Rq.Flow St.
Matl. HWC Eq.Len. El.Pr.Loss ChurnPres. Vel.Pres. End.Node# Elev. End X End K-Fact. End Ttl.Pr.End Rq.Flow End
Path Abs.Rough.Ttl.Len. Fix.Pr.Loss Flow Dir. NodeTypeEnd Hose End Y End Disch. End El.Pres. End Rq.Pres. End
r21 2.5 0.98 0.06927 135.378 n42 43.64 -1.64 0 64.097 0
Rnppl 2.469 nTee 0.899 9.07 Node 0 150.92 0 28.86 0
40 120 12 0.427 0.554 n41 44.62 -1.64 0 62.775 0
None 0.00181 12.98 Node 0 150.92 0 29.287 0
m11 6 3.28 0.09578 -1713.571 n42 43.64 -1.64 0 64.097 0
Cmain 6.065 n90ell -1.655 -19.03 Node 0 150.92 0 28.86 0
40 120 14 0 2.437 n45 43.64 -1.64 0 65.752 0
None 0.00181 17.28 Node 0 154.2 0 28.86 0
fm1 6 3.28 0.09578 1713.571 n46 43.64 -4.92 0 67.407 0
FeedMain 6.065 n90ell 1.655 19.03 Node 0 154.2 0 28.86 0
40 120 14 0 2.437 n45 43.64 -1.64 0 65.752 0
None 0.00181 17.28 Node 0 154.2 0 28.86 0
r22 2.5 0.98 0.06927 -135.378 n44 43.64 104.99 0 54.085 0
Rnppl 2.469 nTee -0.899 -9.07 Node 0 150.92 0 28.86 0
40 120 12 0.427 0.554 n43 44.62 104.99 0 54.557 0
None 0.00181 12.98 Node 0 150.92 0 29.287 0
f10 6 15.09 0.00087 -135.378 n40 43.64 104.99 0 54.071 0
Fmain 6.065 -0.013 -1.5 Node 0 135.83 0 28.86 0
40 120 0 0 0.015 n44 43.64 104.99 0 54.085 0
None 0.00181 15.09 Node 0 150.92 0 28.86 0
r18 2.5 0.98 0.0537 -117.99 n36 43.64 104.99 0 54.027 0
Rnppl 2.469 nTee -0.697 -7.91 Node 0 120.73 0 28.86 0
40 120 12 0.427 0.421 n35 44.62 104.99 0 54.298 0
None 0.00181 12.98 Node 0 120.73 0 29.287 0
f8 6 15.09 0.00587 -379.49 n32 43.64 104.99 0 53.938 0
Fmain 6.065 -0.089 -4.21 Node 0 105.64 0 28.86 0
40 120 0 0 0.12 n36 43.64 104.99 0 54.027 0
None 0.00181 15.09 Node 0 120.73 0 28.86 0
m8 6 15.09 0.06025 -1334.081 n30 43.64 -1.64 0 60.882 0
Cmain 6.065 -0.909 -14.82 Node 0 105.64 0 28.86 0
40 120 0 0 1.477 n34 43.64 -1.64 0 61.792 0
None 0.00181 15.09 Node 0 120.73 0 28.86 0
b21 2.5 106.63 0.0537 117.99 n33 44.62 -1.64 0 60.668 0
Brline 2.469 2(n90ell) 6.37 7.91 Node 0 120.73 0 29.287 0
40 120 12 0 0.421 n35 44.62 104.99 0 54.298 0
None 0.00181 118.63 Node 0 120.73 0 29.287 0
b22 2.5 106.63 0.06075 126.122 n37 44.62 -1.64 0 61.641 0
Brline 2.469 2(n90ell) 7.207 8.45 Node 0 135.83 0 29.287 0
40 120 12 0 0.481 n39 44.62 104.99 0 54.434 0
None 0.00181 118.63 Node 0 135.83 0 29.287 0

Date 17/08/2018 File: CH Almacen PT - montante de 6 pulg.clc Page 12

Calculation performed by SprinkCalc, Copyright © 2001 Tyco Fire Products
 Sprinkler System Hydraulic Analysis

Job : ALMACEN PRODUCTO TERMINADO

Pipe Data (cont)

Pipe# Size Length Fr.Resist. Rt.Flow Flow St.Node# Elev. St. X St. K-Fact. St Ttl.Pr.St. Rq.Pres. St.
Type Int.Diam. Fittings Fric.Pr.Loss Rt.Pres. Velocity NodeTypeSt. Hose St. Y St. Disch. St. El.Pres. St. Rq.Flow St.
Matl. HWC Eq.Len. El.Pr.Loss ChurnPres. Vel.Pres. End.Node# Elev. End X End K-Fact. End Ttl.Pr.End Rq.Flow End
Path Abs.Rough.Ttl.Len. Fix.Pr.Loss Flow Dir. NodeTypeEnd Hose End Y End Disch. End El.Pres. End Rq.Pres. End
r20 2.5 0.98 0.06075 -126.122 n40 43.64 104.99 0 54.071 0
Rnppl 2.469 nTee -0.789 -8.45 Node 0 135.83 0 28.86 0
40 120 12 0.427 0.481 n39 44.62 104.99 0 54.434 0
None 0.00181 12.98 Node 0 135.83 0 29.287 0
r19 2.5 0.98 0.06075 126.122 n38 43.64 -1.64 0 62.856 0
Rnppl 2.469 nTee 0.789 8.45 Node 0 135.83 0 28.86 0
40 120 12 0.427 0.481 n37 44.62 -1.64 0 61.641 0
None 0.00181 12.98 Node 0 135.83 0 29.287 0
m9 6 15.09 0.07049 -1452.071 n34 43.64 -1.64 0 61.792 0
Cmain 6.065 -1.064 -16.13 Node 0 120.73 0 28.86 0
40 120 0 0 1.75 n38 43.64 -1.64 0 62.856 0
None 0.00181 15.09 Node 0 135.83 0 28.86 0
r10 2.5 0.98 0.03864 -98.784 n20 43.64 104.99 0 53.318 0
Rnppl 2.469 nTee -0.502 -6.62 Node 0 60.37 0 28.86 0
40 120 12 0.427 0.295 n19 44.62 104.99 0 53.393 0
None 0.00181 12.98 Node 0 60.37 0 29.287 0
b7 2.5 14.76 0.064 129.711 h5 44.62 44.29 22.4 40.985 40
Brline 2.469 0.945 8.69 Head 0 15.09 143.404 29.287 141.67
40 120 0 0 0.508 h6 44.62 59.06 22.4 40.04 141.67
None 0.00181 14.76 Head 0 15.09 141.741 29.287 40
b8 2.5 14.76 0.00078 -12.03 h6 44.62 59.06 22.4 40.04 40
Brline 2.469 -0.012 -0.81 Head 0 15.09 141.741 29.287 141.67
40 120 0 0 0.004 h7 44.62 73.82 22.4 40.052 141.67
None 0.00181 14.76 Head 0 15.09 141.762 29.287 40
m1 6 15.09 0.00319 -273.042 n2 43.64 -1.64 0 57.859 0
Cmain 6.065 -0.048 -3.03 Node 0 0 0 28.86 0
40 120 0 0 0.062 n6 43.64 -1.64 0 57.907 0
None 0.00181 15.09 Node 0 15.09 0 28.86 0
b6 2.5 45.93 0.25411 273.114 n5 44.62 -1.64 0 54.181 0
Brline 2.469 n90ell 13.197 18.3 Node 0 15.09 0 29.287 0
40 120 6 0 2.254 h5 44.62 44.29 22.4 40.985 141.67
None 0.00181 51.93 Head 0 15.09 143.404 29.287 40
r4 2.5 0.98 0.29833 297.827 n8 43.64 104.99 0 52.331 0
Rnppl 2.469 nTee 3.874 19.96 Node 0 15.09 0 28.86 0
40 120 12 0.427 2.681 n7 44.62 104.99 0 48.031 0
None 0.00181 12.98 Node 0 15.09 0 29.287 0
f1 6 15.09 0.00374 -297.613 n4 43.64 104.99 0 52.274 0
Fmain 6.065 -0.057 -3.31 Node 0 0 0 28.86 0
40 120 0 0 0.074 n8 43.64 104.99 0 52.331 0
None 0.00181 15.09 Node 0 15.09 0 28.86 0

Date 17/08/2018 File: CH Almacen PT - montante de 6 pulg.clc Page 13

Calculation performed by SprinkCalc, Copyright © 2001 Tyco Fire Products
 Sprinkler System Hydraulic Analysis

Job : ALMACEN PRODUCTO TERMINADO

Pipe Data (cont)

Pipe# Size Length Fr.Resist. Rt.Flow Flow St.Node# Elev. St. X St. K-Fact. St Ttl.Pr.St. Rq.Pres. St.
Type Int.Diam. Fittings Fric.Pr.Loss Rt.Pres. Velocity NodeTypeSt. Hose St. Y St. Disch. St. El.Pres. St. Rq.Flow St.
Matl. HWC Eq.Len. El.Pr.Loss ChurnPres. Vel.Pres. End.Node# Elev. End X End K-Fact. End Ttl.Pr.End Rq.Flow End
Path Abs.Rough.Ttl.Len. Fix.Pr.Loss Flow Dir. NodeTypeEnd Hose End Y End Disch. End El.Pres. End Rq.Pres. End
b9 2.5 14.76 0.08772 -153.792 h7 44.62 73.82 22.4 40.052 40
Brline 2.469 -1.295 -10.31 Head 0 15.09 141.762 29.287 141.67
40 120 0 0 0.715 h8 44.62 88.58 22.4 41.347 141.67
None 0.00181 14.76 Head 0 15.09 144.035 29.287 40
b10 2.5 16.4 0.29833 -297.827 h8 44.62 88.58 22.4 41.347 40
Brline 2.469 n90ell -6.684 -19.96 Head 0 15.09 144.035 29.287 141.67
40 120 6 0 2.681 n7 44.62 104.99 0 48.031 0
None 0.00181 22.4 Node 0 15.09 0 29.287 0
b2 2.5 14.76 0.06399 129.709 h1 44.62 44.29 22.4 40.945 40
Brline 2.469 0.945 8.69 Head 0 0 143.333 29.287 141.67
40 120 0 0 0.508 h2 44.62 59.06 22.4 40 141.67
None 0.00181 14.76 Head 0 0 141.67 29.287 40
b3 2.5 14.76 0.00077 -11.961 h2 44.62 59.06 22.4 40 40
Brline 2.469 -0.011 -0.8 Head 0 0 141.67 29.287 141.67
40 120 0 0 0.004 h3 44.62 73.82 22.4 40.011 141.67
None 0.00181 14.76 Head 0 0 141.69 29.287 40
r1 2.5 0.98 0.25399 273.042 n2 43.64 -1.64 0 57.859 0
Rnppl 2.469 nTee 3.298 18.3 Node 0 0 0 28.86 0
40 120 12 0.427 2.253 n1 44.62 -1.64 0 54.135 0
None 0.00181 12.98 Node 0 0 0 29.287 0
b1 2.5 45.93 0.25399 273.042 n1 44.62 -1.64 0 54.135 0
Brline 2.469 n90ell 13.19 18.3 Node 0 0 0 29.287 0
40 120 6 0 2.253 h1 44.62 44.29 22.4 40.945 141.67
None 0.00181 51.93 Head 0 0 143.333 29.287 40
r2 2.5 0.98 0.29793 297.613 n4 43.64 104.99 0 52.274 0
Rnppl 2.469 nTee 3.868 19.94 Node 0 0 0 28.86 0
40 120 12 0.427 2.677 n3 44.62 104.99 0 47.979 0
None 0.00181 12.98 Node 0 0 0 29.287 0
r3 2.5 0.98 0.25411 273.114 n6 43.64 -1.64 0 57.907 0
Rnppl 2.469 nTee 3.299 18.3 Node 0 15.09 0 28.86 0
40 120 12 0.427 2.254 n5 44.62 -1.64 0 54.181 0
None 0.00181 12.98 Node 0 15.09 0 29.287 0
b4 2.5 14.76 0.08758 -153.651 h3 44.62 73.82 22.4 40.011 40
Brline 2.469 -1.293 -10.3 Head 0 0 141.69 29.287 141.67
40 120 0 0 0.713 h4 44.62 88.58 22.4 41.304 141.67
None 0.00181 14.76 Head 0 0 143.961 29.287 40
b5 2.5 16.4 0.29793 -297.613 h4 44.62 88.58 22.4 41.304 40
Brline 2.469 n90ell -6.675 -19.94 Head 0 0 143.961 29.287 141.67
40 120 6 0 2.677 n3 44.62 104.99 0 47.979 0
None 0.00181 22.4 Node 0 0 0 29.287 0

Date 17/08/2018 File: CH Almacen PT - montante de 6 pulg.clc Page 14

Calculation performed by SprinkCalc, Copyright © 2001 Tyco Fire Products
 Sprinkler System Hydraulic Analysis

Job : ALMACEN PRODUCTO TERMINADO

Pipe Data (cont)

Pipe# Size Length Fr.Resist. Rt.Flow Flow St.Node# Elev. St. X St. K-Fact. St Ttl.Pr.St. Rq.Pres. St.
Type Int.Diam. Fittings Fric.Pr.Loss Rt.Pres. Velocity NodeTypeSt. Hose St. Y St. Disch. St. El.Pres. St. Rq.Flow St.
Matl. HWC Eq.Len. El.Pr.Loss ChurnPres. Vel.Pres. End.Node# Elev. End X End K-Fact. End Ttl.Pr.End Rq.Flow End
Path Abs.Rough.Ttl.Len. Fix.Pr.Loss Flow Dir. NodeTypeEnd Hose End Y End Disch. End El.Pres. End Rq.Pres. End
r5 2.5 0.98 0.25456 273.373 n10 43.64 -1.64 0 58.081 0
Rnppl 2.469 nTee 3.305 18.32 Node 0 30.18 0 28.86 0
40 120 12 0.427 2.258 n9 44.62 -1.64 0 54.349 0
None 0.00181 12.98 Node 0 30.18 0 29.287 0
b16 2.5 106.63 0.03792 97.78 n13 44.62 -1.64 0 57.532 0
Brline 2.469 2(n90ell) 4.498 6.55 Node 0 45.28 0 29.287 0
40 120 12 0 0.289 n15 44.62 104.99 0 53.034 0
None 0.00181 118.63 Node 0 45.28 0 29.287 0
r8 2.5 0.98 0.03792 -97.78 n16 43.64 104.99 0 52.968 0
Rnppl 2.469 nTee -0.492 -6.55 Node 0 45.28 0 28.86 0
40 120 12 0.427 0.289 n15 44.62 104.99 0 53.034 0
None 0.00181 12.98 Node 0 45.28 0 29.287 0
r7 2.5 0.98 0.03792 97.78 n14 43.64 -1.64 0 58.45 0
Rnppl 2.469 nTee 0.492 6.55 Node 0 45.28 0 28.86 0
40 120 12 0.427 0.289 n13 44.62 -1.64 0 57.532 0
None 0.00181 12.98 Node 0 45.28 0 29.287 0
m3 6 15.09 0.02444 -819.53 n10 43.64 -1.64 0 58.081 0
Cmain 6.065 -0.369 -9.1 Node 0 30.18 0 28.86 0
40 120 0 0 0.557 n14 43.64 -1.64 0 58.45 0
None 0.00181 15.09 Node 0 45.28 0 28.86 0
m4 6 15.09 0.03011 -917.31 n14 43.64 -1.64 0 58.45 0
Cmain 6.065 -0.454 -10.19 Node 0 45.28 0 28.86 0
40 120 0 0 0.698 n18 43.64 -1.64 0 58.904 0
None 0.00181 15.09 Node 0 60.37 0 28.86 0
b17 2.5 106.63 0.03864 98.784 n17 44.62 -1.64 0 57.977 0
Brline 2.469 2(n90ell) 4.584 6.62 Node 0 60.37 0 29.287 0
40 120 12 0 0.295 n19 44.62 104.99 0 53.393 0
None 0.00181 118.63 Node 0 60.37 0 29.287 0
f3 6 15.09 0.02871 -894.041 n12 43.64 104.99 0 52.535 0
Fmain 6.065 -0.433 -9.93 Node 0 30.18 0 28.86 0
40 120 0 0 0.663 n16 43.64 104.99 0 52.968 0
None 0.00181 15.09 Node 0 45.28 0 28.86 0
r9 2.5 0.98 0.03864 98.784 n18 43.64 -1.64 0 58.904 0
Rnppl 2.469 nTee 0.502 6.62 Node 0 60.37 0 28.86 0
40 120 12 0.427 0.295 n17 44.62 -1.64 0 57.977 0
None 0.00181 12.98 Node 0 60.37 0 29.287 0
b12 2.5 14.76 0.064 129.716 h9 44.62 44.29 22.4 41.13 40
Brline 2.469 0.945 8.69 Head 0 30.18 143.657 29.287 141.67
40 120 0 0 0.508 h10 44.62 59.06 22.4 40.185 141.67
None 0.00181 14.76 Head 0 30.18 141.997 29.287 40

Date 17/08/2018 File: CH Almacen PT - montante de 6 pulg.clc Page 15

Calculation performed by SprinkCalc, Copyright © 2001 Tyco Fire Products
 Sprinkler System Hydraulic Analysis

Job : ALMACEN PRODUCTO TERMINADO

Pipe Data (cont)

Pipe# Size Length Fr.Resist. Rt.Flow Flow St.Node# Elev. St. X St. K-Fact. St Ttl.Pr.St. Rq.Pres. St.
Type Int.Diam. Fittings Fric.Pr.Loss Rt.Pres. Velocity NodeTypeSt. Hose St. Y St. Disch. St. El.Pres. St. Rq.Flow St.
Matl. HWC Eq.Len. El.Pr.Loss ChurnPres. Vel.Pres. End.Node# Elev. End X End K-Fact. End Ttl.Pr.End Rq.Flow End
Path Abs.Rough.Ttl.Len. Fix.Pr.Loss Flow Dir. NodeTypeEnd Hose End Y End Disch. End El.Pres. End Rq.Pres. End
b13 2.5 14.76 0.00081 -12.281 h10 44.62 59.06 22.4 40.185 40
Brline 2.469 -0.012 -0.82 Head 0 30.18 141.997 29.287 141.67
40 120 0 0 0.005 h11 44.62 73.82 22.4 40.197 141.67
None 0.00181 14.76 Head 0 30.18 142.018 29.287 40
m2 6 15.09 0.01152 -546.157 n6 43.64 -1.64 0 57.907 0
Cmain 6.065 -0.174 -6.07 Node 0 15.09 0 28.86 0
40 120 0 0 0.248 n10 43.64 -1.64 0 58.081 0
None 0.00181 15.09 Node 0 30.18 0 28.86 0
b11 2.5 45.93 0.25456 273.373 n9 44.62 -1.64 0 54.349 0
Brline 2.469 n90ell 13.22 18.32 Node 0 30.18 0 29.287 0
40 120 6 0 2.258 h9 44.62 44.29 22.4 41.13 141.67
None 0.00181 51.93 Head 0 30.18 143.657 29.287 40
r6 2.5 0.98 0.29977 298.601 n12 43.64 104.99 0 52.535 0
Rnppl 2.469 nTee 3.892 20.01 Node 0 30.18 0 28.86 0
40 120 12 0.427 2.695 n11 44.62 104.99 0 48.216 0
None 0.00181 12.98 Node 0 30.18 0 29.287 0
f2 6 15.09 0.01352 -595.44 n8 43.64 104.99 0 52.331 0
Fmain 6.065 -0.204 -6.61 Node 0 15.09 0 28.86 0
40 120 0 0 0.294 n12 43.64 104.99 0 52.535 0
None 0.00181 15.09 Node 0 30.18 0 28.86 0
b14 2.5 14.76 0.08826 -154.299 h11 44.62 73.82 22.4 40.197 40
Brline 2.469 -1.303 -10.34 Head 0 30.18 142.018 29.287 141.67
40 120 0 0 0.719 h12 44.62 88.58 22.4 41.5 141.67
None 0.00181 14.76 Head 0 30.18 144.302 29.287 40
b15 2.5 16.4 0.29977 -298.601 h12 44.62 88.58 22.4 41.5 40
Brline 2.469 n90ell -6.716 -20.01 Head 0 30.18 144.302 29.287 141.67
40 120 6 0 2.695 n11 44.62 104.99 0 48.216 0
None 0.00181 22.4 Node 0 30.18 0 29.287 0

Date 17/08/2018 File: CH Almacen PT - montante de 6 pulg.clc Page 16

Calculation performed by SprinkCalc, Copyright © 2001 Tyco Fire Products
 Sprinkler System Hydraulic Analysis

Job : ALMACEN PRODUCTO TERMINADO

System Requirements Additional Pump Data Hydraulic Data

System Req.Flow: 1963.571 Rated Flow: 2500 Model: Hazen-Williams
Sys.Req.Pressure: 132.453 Rated Pressure: 175 Fluid:
Available Pressure: 0 Churn Pressure: 190 Fluid Density:
Safety Pressure: -132.453 Outside Hose Dyn. Viscosity:

Supply Data System Volume: 1582.2 gal

Hose Flow: 0
Node #: src1 Legend
Elevation: -22.97 7 - System Demand 8 - Add. Pump

Static Pressure: 0
Residual Pressure: 0
Flow@Res.Pressure: 0
P, psi
200.000

180.000 8

160.000

140.000

120.000

100.000

80.000 7

60.000

40.000

20.000

Q1.85, gpm
380 1140 1900 2660 3420
760 1520 2280 3040 3800

Date 17/08/2018 File: CH Almacen PT - montante de 6 pulg.clc Page 17

Calculation performed by SprinkCalc, Copyright © 2001 Tyco Fire Products
 Cálculo Hidráulico para ACI de
la Nueva Planta Farmagro

6. Conclusiones:

 El día 05 de julio de 2018 se reciben los resultados del primer cálculo

hidráulico en el que se obtuvieron los siguientes resultados:

- Flujo Requerido por el Sistema: 1942 g.p.m.

- Presión Requerida por el Sistema: 850 p.s.i.

 De los resultados obtenidos el 05 de julio se pudo observar que los

sistemas requerían un replanteo debido a la elevada presión del sistema.
Los replanteos se hicieron en referencia a los diámetros de tuberías del
manifold, alimentadores horizontales y ramales verticales según los
siguientes valores:

- Nuevo diámetro para Manifold: 6”

- Nuevo diámetro para alimentadores horizontales: 6” (arriba y abajo)
- Nuevos diámetros de troncales: 8" y 10"
- Nuevo diámetro para cada ramal vertical: 2 ½”

 El día 07 de agosto de 2018 se reciben los nuevos resultados del cálculo

hidráulico con las nuevas consideraciones, siendo los resultados los
siguientes:

- Flujo Requerido por el Sistema: 1830 g.p.m.

- Presión Requerida por el Sistema: 206 p.s.i.

Sin embargo estos resultados no mostraban la sección desde la

bomba de ACI, por lo que se volvió a requerir la corrida del
programa, siendo los últimos resultados los siguientes:

- Flujo Requerido por el Sistema: 1963.6 g.p.m.

- Presión Requerida por el Sistema: 132.5 p.s.i.

Agosto 2018