0186-CAL-IMT-039-060-0002-Tanque Agua Servicios - Cálculos

ABEINSA EPC
ABENGOA CHILE
TANQUE AGUA DE SERVICIOS Y PCI – T3101

CÁLCULOS GENERALES
Título
Tanque Agua de Servicios y PCI - Cálculos Generales
Cliente: CSP Atacama Uno
Proyecto: CSP Cerro Dominador
Documento: 0186-CAL-IMT-039-060-0002
Código Proveedor: IMT-1492-C-02
Revisión: 02
Fecha: 07/07/2015
Elaborado por:
PABLO AGÜERIA FERNÁNDEZ
Revisado por:
Aprobado por:
Este documento es propiedad de la UTE Abener Teyma Atacama I. Queda prohibida su reproducción total o parcial, por cualquier medio, así como
su distribución a terceros, sin el expreso consentimiento por escrito UTE Abener Teyma Atacama i.
El original de este documento está firmado electrónicamente y archivado en el gestor documental de la UTE
Documento: 0186-CAL-IMT-039-060-0002
ABEINSA EPC
ABENGOA Revisión: 02 Fecha: 07/07/2015
CHILE
Page: 2 of 441
Hoja de Control de Revisiones
Revisión Fecha Motivo de la revisión Elaborado Revisado Aprobado

00 25/04/15 Nueva Edición PA PA PA
Actualización según
01 08/05/15 PA PA PA
comentarios revisor sísmico.
02 07/07/15 Codificación del documento PA PA PA
INDICE GENERAL:
1. CONSIDERACIONES DE DISEÑO Y NORMATIVA APLICABLE.

2. DIMENSIONAMIENTO EQUIPO.
3. DIMENSIONAMIENTO DE LA ESTRUCTURA DEL TECHO.
4. DIMENSIONAMIENTO VENTEOS.
5. DIMENSIONAMIENTO PERNOS DE ANCLAJE.
6. DIMENSIONAMIENTO LLAVE DE CORTANTE.
7. DIMENSIONAMIENTO SILLAS DE ANCLAJE.
0186-CAL-IMT-039-060-0002 Tanque Agua Servicios PCI - Cálculos generales IMETAL, S.A.

OT1492/15
1.-CONSIDERACIONES DE DISEÑO Y NORMATIVA APLICABLE.
-Software de diseño: Intergraph Tank 2015.
-Códigos de diseño:
API 650 Edición 12, Adenda 1 Septiembre 2014.
API 2000 Edición 6.
Eurocódigo 3
-Normas aplicadas:
NCh 2369:2003 – Diseño sísmico de estructuras e instalaciones industriales.
NCh 433:1996 – Diseño sísmico de edificios.
NCh432:2012 Cálculo de acciones de viento sobre construcciones.
NCh431:2010 Cargas de nieve.
0186-ESP-AEE-000-050-0002 rev.03– Criterios de diseño sísmico para el proyecto.
0186-ESP-AEE-000-050-0003 rev.00 – Informe de riesgo sísmico.
0186-HDD-AEE-039-062-0001 rev.06 - Hojas de datos tanque de agua bruta.
0186-ESP-AEE-000-001-0001 rev.02 – Especificación técnica de localización y
condiciones ambientales.
0186-ESP-AEE-000-061-0001 rev.02 – Especificación de diseño de tuberías.
-Materiales empleados:
Equipo: EN10025 S275J2. El equipo se construirá con el material especificado resultante

de realizar ensayos de impacto a -20ºC a un EN10025 S275JR; criterio de aceptación 27J.
Estructura de techos: EN10025 S275JR.
Pernos de anclaje: redondo S355JR; tuercas 5; chapa contrapresión: S275JR.
Ver especificaciones en dimensionamiento de equipos, secciones 2, 3 y 5.
-Cargas de diseño:
Altura de diseño de fluido.

Sobrepresión de 0.005 barg con la que se han dimensionado el venteo del equipo.
Vacío de 0.005 barg con el que se ha dimensionado el venteo del equipo.
Acciones de viento:
Se ha calculado el cortante en la base obtenido aplicando directamente la velocidad
de viento aplicable al emplazamiento (36.8 m/s) según el procedimiento dispuesto en
API650, y se ha comparado con el valor obtenido aplicando NCh432:2012, método 1,
procedimiento simplificado. Con el segundo método se ha obtenido un cortante en la base
en torno a un 15% mayor, por lo que se ha considerado esta segunda condición para el
dimensionamiento del equipo. Ver presiones de viento en el punto 2 de este documento y
en los planos generales del equipo.
En el diseño del techo no se ha considerado las acciones de viento por tener por ser su
resultante de succión.

OT1492/15
Acciones sísmicas: se han considerado los valores máximos de las aceleraciones de
cálculo obtenidos entre las especificaciones 0186-ESP-AEE-000-050-0002 rev.03 y NCh
2369:2003.
Las aceleraciones consideradas han sido las siguientes:
Aceleración inductiva (Ai): 0.34762
Aceleración convectiva (Ac): 0.0693
Aceleración vertical (Av): 0.23218
Peso propio equipo.
Peso propio estructura.
Peso propio plataformas, en los equipos que aplica.
Sobrecarga de uso en el techo: 219 kg/m².
Sobrecarga plataformas: 300 kg/m², en los casos que aplica.
Sobrecarga de nieve: no aplica para el emplazamiento del proyecto.
-Combinaciones de carga: para el equipo según API 650 y para el techo según EC3 (ver
cálculos).
-Método de análisis sísmico: se ha implementado el método de cálculo descrito en API650
que aplica una carga lateral equivalente aplicado sobre un modelo matemático lineal del
tanque basado en considerar paredes rígidas.
-Factor de importancia considerado, I: 1.2
-Tipo de sismo utilizado: OBE.
-Factor de reducción, R: 4

OT1492/15
2.- DIMENSIONAMIENTO EQUIPO.

OT1492/15
Table of Contents
Job Title Page ............................................................................ 2
User Input Data ........................................................................... 3
Wind, Material, Thickness & Weights ...................................................... 10
Seismic Analysis Results ................................................................. 13
Anchor Bolt Details ...................................................................... 14
Nozzle Flexibility & Load Results ........................................................ 15
API-650 App V External Pressure .......................................................... 19
Anchor Chair Calculations ................................................................ 20
Fluid Height Calculations ................................................................ 21
Wind Calculations ........................................................................ 23
Thickness Calculations ................................................................... 25
Appendix F Calculations .................................................................. 28
Bolt Load Calculations ................................................................... 29
Seismic Analysis Calculations ............................................................ 31
Nozzle Stiffness Calculations ............................................................ 37
Appendix V External Pressure ............................................................ 103
TANK 2015, API-650/653 Analysis 2
Licensee: INDUSTRIAS METALICAS IMETAL, S.A. ID: 581303
Job: Agua Servicios_rev1 Date: May 7,2015 Time: 5:54p
PROJECT: CCSP ATACAMA I
CLIENT : ABEINSA EPC - ABENGOA CHILE
ANALYST: P.A.
NOTES : T-3101 - TANQUE AGUA DE SERVICIOS Y PCI

API-650/653 GENERAL TANK DATA :

API-650 12th Edition, Addendum 1, September 2014
API Design Code ( 650 or 653 )......................... 650

Design Method (V, O, or A) ............................ O
(V=variable, O=one foot, A=Appendix A)
Run Objective (D=design, A=analyze) ................... A
Design Temperature ...............................(C ) 42.000

Design Pressure at Top ....................(bars ) 0.50000E-02
Shell Material ........................................ S275,J2
Ratio of Normal Operating Pressure/Design Pressure [Fp] 0.40000
Shell Design Stress [Sd] ..................(N./sq.mm. ) 164.10

Shell Hydro Test Stress [St] ..............(N./sq.mm. ) 175.82
Tank Nominal Diameter [D] ........................(mm.) 15010.

Tank Shell Height [HTK] ..........................(mm.) 12600.
Design Liquid Level [H] ..........................(mm.) 12250.
Liquid Specific Gravity [G] ........................... 0.99700
Weight of Attachments/Structures..................(kN ) 0.00000
Distance down to Top Wind Girder .................(mm.) 0.00000
Joint Efficiency (App A or 653) [E] ................... 1.0000
Wind Velocity .............................(m/sec ) 36.800
Insulation Thickness .............................(mm.) 0.00000

Insulation Density ........................(kg./cu.cm.) 0.00000
Include Annular Base Plate Details .................... Yes

Include Wind Moment in Appendix F_4_2 Calculations .... No
Number of Shell Courses ............................... 7

Shell Course # 1 Height ..........................(mm.) 2000.0
Shell Course # 1 Thickness .......................(mm.) 12.000
Shell Course # 1 Corrosion Allowance [CA] ........(mm.) 3.0000
TANK SHELL COURSE MATERIALS :
Shell Course # 1 Material Name ........................ S275,J2

Shell Course # 1 Design Stress [Sd] .......(N./sq.mm. ) 164.10
Shell Course # 1 Hydro Test Stress [St] ...(N./sq.mm. ) 175.82
Shell Course # 1 Minimum Yield Stress .....(N./sq.mm. ) 264.77
Shell Course # 1 Minimum Tensile Stress ...(N./sq.mm. ) 410.25
Shell Course # 1 Maximum Thickness ..............(mm. ) 38.100
Shell Course # 1 Material Grade .......................
Shell Course # 1 Material Group ....................... 4







ANCHOR BOLT DETAILS :

Anchor Bolt Diameter (optional) ..................(in.) 2.205
Threads per Unit Length ........................(1/in.) 4.5000
Number of Anchor Bolts (optional) ..................... 18.000
Bolt Yield Stress .........................(N./sq.mm. ) 335.00
Bolt Offset from Mean Tank Diameter ..............(mm.) 95.000
Anchor Bolt Corrosion Allowance (optional) .......(in.) 0.23622
Wind Pressure versus Elevation :

Elevation Pressure
--------- --------
16000.00 mm. 1.14 kN/m2
Wind pressure accorting to NCh 432:2010.

API-650 ROOF DETAILS SPECIFICATION :

Roof Type (1-5) ....................................... 5
(1=Supt Cone 2=Rafter Supt Cone 3=Cone 4=Dome 5=Umbrella)
Angle Between Roof and Horizontal ................(deg) 25.465
Net Area at Roof/Shell Junction [A] ...........(sq.mm.) 0.00000
Thickness of Roof Plate ..........................(mm.) 6.0000
Roof Plate Corrosion Allowance ...................(mm.) 0.00000
Ground Snow Load ..........................(kPa ) 0.00000
Roof Live Load ............................(kPa ) 2.1462
Roof Spherical Radius ............................(mm.) 59.055
---/ For General Roof, No Design /---
Weight of Roof Plates ............................(kN ) 94.000
Weight of Roof Framing ...........................(kN ) 0.00000
Pct of Weights Supported by Shell ..................... 100.00
---/ For Supported Cone Roof Design /---

Structural Database ................................... GERM91.BIN
Preferred Rafter Type (I, U, T ) ...................... I
Preferred Girder Type (I, U, T ) ...................... I
Preferred Column Type (I, U, T, P ) ................... P
Roof Plate Material ................................... S275,J2
Roof Plate Allowable Design Stress ........(N./sq.mm. ) 164.10
Structural Member Material ............................ S275,J2
Structural Member Allowable Design Stress..(N./sq.mm. ) 164.10
Maximum Allowed Rafter Length ....................(mm.) 6000.0
Maximum Allowed Girder Length ....................(mm.) 6000.0
Center Column Cap Plate Diameter .................(mm.) 2000.0
API-650 SEISMIC DATA (App E.) :

Minimum Yield Strength of Bottom Plate .....(N./sq.mm. 275.00
Minimum Yield Strength of Weld Material ....(N./sq.mm. 275.00
Nominal Thickness of Bottom Plate (tb) ..........(in. ) 10.000
Seismic Use Group (SUG)................................ 2.0000
Friction Factor ....................................... 0.40000
Importance Factor ..................................... 1.2000
Initial Anchorage Type ................................ M
Earthquake Type ....................................... S
Site Class ............................................ 6.0000
Spectral Acceleration Adjustment Coefficient (K) ...... 1.5000
Scaling Factor (Q) .................................... 1.0000
Transitional Period (TL) .............................. 0.00000
Mapped maximum earthquake for short periods (Ss) ...... 0.00000
Mapped maximum earthquake for 1 sec periods (S1) ...... 0.00000
Mapped maximum earthquake for 0 sec period (S0) ...... 0.00000
Non-ASCE peak ground acceleration (Sp) ................ 0.00000
ASCE short period design acceleration parameter (SDS).. 0.49400
--- Site Specific Data ---
Spectral acceleration parameter at 0 period (Sa0*) .... 0.46350
Spectral acceleration parameter at any period (Sa*) ... 0.77000E-01
API-650 NOZZLE FLEXIBILITIES (App P.) :

Nozzle Designation / Number # 1........................ A1
Nozzle Height above bottom plate .................(in.) 476.38
Nozzle Outer Diameter ............................(in.) 3.0000
delta Temperature ................................(C ) 0.00000
Modulus of Elasticity .....................(N./sq.mm. ) 0.20201E+06
Expansion Coefficient ....................(mm./mm./deg) 12.000
Reinforcement on (S)hell or (N)ozzle .................. S
Nozzle RePad Thickness ...........................(in.) 0.23622
Nozzle Weight ....................................(kN ) 0.13000
Applied External Radial Force ....................(kN ) 3.6000
Applied External Circumferential Moment .......(N.m. ) 500.00
Applied External Longitudinal Moment ..........(N.m. ) 700.00
Apply PVP-1279 (Y)es or (N)o .......................... Y
Nozzle Thickness for PVP-1279 ....................(mm.) 8.1300
Repad Outer Diameter for PVP-1279 ................(in.) 10.430


Nozzle Weight ....................................(kN ) 0.59000E-01

Nozzle Weight ....................................(kN ) 0.13000
Nozzle Designation / Number # 1........................ A4A5

Nozzle Weight ....................................(kN ) 0.46500
Apply PVP-1279 (Y)es or (N)o .......................... N
Nozzle Designation / Number # 1........................ B1

Nozzle Weight ....................................(kN ) 0.48800
Nozzle Designation / Number # 1........................ B2R1

Nozzle Weight ....................................(kN ) 0.18900


Nozzle Weight ....................................(kN ) 0.67800
Nozzle Designation / Number # 1........................ O

Nozzle Weight ....................................(kN ) 0.28100
Nozzle Designation / Number # 1........................ D,R2

Nozzle Weight ....................................(kN ) 0.19900
Nozzle Designation / Number # 1........................ R3

Nozzle Weight ....................................(kN ) 0.17900

Nozzle Weight ....................................(kN ) 0.13700

Nozzle Weight ....................................(kN ) 0.29700

Nozzle Designation / Number # 1........................ T1T2

API-650 External Pressure (App V.) :

Specified External Pressure (Pe) ..........(kPa ) 0.50000
Elastic Modulus of Roof Plate Material ....(N./sq.mm. ) 0.20201E+06
Bottom stiffener allow. compressive stress (N./sq.mm. ) 110.00
Top stiffener allow. compressive stress ...(N./sq.mm. ) 164.00

Nominal Thickness of Bottom Plate (tb) ..........(in. ) 10.000
Smallest allowable tensile stress of roof,
shell and stiffeners ....................(N./sq.mm. ) 164.00
Roof Dish Radius ................................(mm. ) 18000.
Computation Control Directives
ROOF_PROJECTION_IN_WIND_MOMENT= YES
SHELL_THICK_CONVERG_TOLERANCE= 0.12699999 mm.
GENERATE_MESSAGE_FILE= YES
COSINE_CURVE_TOLERANCE= 0.30000001
COSINE_CURVE_ITERATION_LIMIT= 100.00000
WIND_GIRDER_SHELL_THICKNESS= MAX
SHELL_SETTLEMENT_METHOD= FOURIER_SERIES
CORRODED_NOZZLES= YES
653_CORRODED_HYDROTEST_CASE= NO
THICKNESS_ROUNDUP_TO_NEAREST= 0.00000000 mm.
PLATE_MATERIAL_DENSITY= 0.78500481E-02 kg./cu.cm.
MODIFY_FLUID_HEIGHT_BY_PRESSURE= NO
ROUND_ANCHOR_BOLTS_BY= 4.0000000
WIND_MOMENT_IN_APP_F= Sect_5.9.7.1
FULL_SHELL_WEIGHT_IN_APP_F= YES
USE_P_FROM_F.4.1_ONLY_IN_F.6= NO
USE_NON_CORRODED_ROOF_WEIGHT_AS_DLR= NO
TANK(c) Intergraph CADWorx & Analysis Solutions, Inc. 2015

WIND INFORMATION
Area Exposed to Wind .....................(mm. **2) 0.21612E+09

Sect 5.9.7.1 Wind Moment on Tank .........(N.m. ) 0.16909E+07
Wind Shear Force Acting on Tank ..........(kN ) 240.68
Wind Pressure versus Elevation :

Elevation Pressure
--------- --------
16000.00 mm. 1.14 kN/m2
0.00 mm. 0.00 kN/m2
0.00 mm. 0.00 kN/m2
0.00 mm. 0.00 kN/m2
0.00 mm. 0.00 kN/m2
0.00 mm. 0.00 kN/m2
0.00 mm. 0.00 kN/m2
0.00 mm. 0.00 kN/m2
0.00 mm. 0.00 kN/m2
0.00 mm. 0.00 kN/m2
MATERIAL PROPERTY INFORMATION

Wind Girder Height Reduction Factor .................. 1.0000
The following material properties have been modified in

accordance with API-650 (and API-653 where applicable).
Course Material Design Test App M

Number Name Stress (Sd) Stress (St) Reduction
(N./sq.mm. ) (N./sq.mm. )
1 S275,J2 164.10 175.82 1.0000
2 S275,J2 164.10 175.82 1.0000
3 S275,J2 164.10 175.82 1.0000
4 S275,J2 164.10 175.82 1.0000
5 S275,J2 164.10 175.82 1.0000
6 S275,J2 164.10 175.82 1.0000
7 S275,J2 164.10 175.82 1.0000
SHELL COURSE THICKNESS DATA - One Foot Method

Thickness Values for Three Cases MIN TEMP
COURSE DESIGN TEST USER (deg C )
(mm. ) (mm. ) (mm. ) Status
1 8.3391 6.0000 12.000 -9.6 PASS

2 7.4452 5.0000 8.0000 -12.6 PASS
3 6.5512 5.0000 8.0000 -12.6 PASS
4 5.6573 5.0000 8.0000 -12.6 PASS
5 5.0000 5.0000 6.0000 -13.9 PASS
6 5.0000 5.0000 6.0000 -13.9 PASS
7 5.0000 5.0000 6.0000 -13.9 PASS
SHELL COURSE ALLOWED FLUID HEIGHTS

Fluid Heights for Three Cases
COURSE DESIGN TEST REQUIRED
(mm. ) (mm. ) (mm. )
1 20440. 28984. 12250.

2 11491. 19424. 10250.
3 11491. 19424. 8250.0
4 11491. 19424. 6250.0
5 7016.7 14644. 4250.0
6 7016.7 14644. 2250.0
7 7016.7 14644. 750.00
Maximum allowed fluid height of entire tank for:

Design Thickness Case .................(mm. ) 13491.
Test Thickness Case .................(mm. ) 21424.
Required fluid height .................(mm. ) 12250.
BASE PLATE DETAILS - SHELL WEIGHT & CENTER OF GRAVITY

Annular Base Plate Thickness .............(mm. ) 9.0000
(from API-650 Table 5-1 plus corrosion)
Annular Base Plate Width per 5.5.2 .......(mm. ) 672.81
( 2 + ThkCrs1 + max[ 24, (2tb * sqrt(Fy/2YHG))] )
Weight of Shell + Nozzles ................(kN ) 364.89
Total Weight of all Nozzles ..............(kN ) 3.3500
Center of Gravity (Shell+Nozzles) ........(mm. ) 5512.7
WIND OVERTURNING STABILITY CHECK

Corroded Shell Weight + %Roof - Uplift ...(kN ) 286.29
wa .......................................(kN./m. ) 12.997
Mw - moment due to wind (hor+ver) press ..(N.m. ) 0.48322E+06
Mws - moment due to wind (hor) press .....(N.m. ) 0.48322E+06
Mpi - moment due to internal pressure ....(N.m. ) 0.66399E+06
Mf - moment due to tank liquid ...........(N.m. ) 0.45997E+07
Mdl - moment due to shell & roof .........(N.m. ) 0.17088E+07
Anchors not needed for Sect. 5.11
WIND GIRDER INFORMATION

For "open top" tanks ...
Required Section Modulus, Top Girder ...(mm. **3) 77309.
Table 5-20 Detail, B value .............(mm. ) b 0.00
Table 5-20 Shape name (if applicable)............... 4x4x.375
Maximum Height of Unstiffened Shell ......(mm. ) 30498.
WIND GIRDER - TRANSFORMED SECTION METHOD

Number of Intermediate Girders Reqd .................. 0
WEIGHT SUMMARY
--------------
Shell (Corroded) .............................(kN ): 224.
Shell (Non-Corroded) .........................(kN ): 362.
Annular Base Plate ...........................(kN ): 21.
Bottom Plate .................................(kN ): 138.
Nozzles ......................................(kN ): 3.
Roof Plates ..................................(kN ): 94.
Roof Framing/Structure .......................(kN ): 0.
Shell Attachments ............................(kN ): 0.
Insulation ...................................(kN ): 0.
Operating Fluid ..............................(kN ): 21160.
Water Weight .................................(kN ): 21224.
Operating Weight (Non-Corroded) ..............(kN ): 21898.

Test Weight (Non-Corroded) ...................(kN ): 21961.
Empty Weight (Non-Corroded) ..................(kN ): 737.

SEISMIC EVALUATION RESULTS - Appendix E

Site-Specific Ground Motion
Design Fluid Weight (kN ) 21160.
TC -convective sloshing period (sec) 4.0661
Ac -convective spectral accel parameter 0.69300E-01

Ai -impulsive spectral accel parameter 0.34762
Wc -effective convective fluid weight(kN ) 5933.7
Wi -effective impulsive fluid weight (kN ) 15508.
Vc -convective liquid base shear (kN ) 411.20
Vi -impulsive liquid base shear (kN ) 5605.9
V -total design base shear (kN ) 5620.9
VS -shear resistance (kN ) 7902.4
Xc -ring wall convective moment arm (mm. ) 8549.8

Xi -ring wall impulsive moment arm (mm. ) 4714.1
XCS-slab convective moment arm (mm. ) 8934.2
XIS-slab impulsive moment arm (mm. ) 7025.6
WS -shell+appurtenances weight (kN ) 364.89
Wrs-roof, framing 10% snow weight (kN ) 94.000
Mrw-ringwall overturning moment (N.m. ) 0.26795E+08
Ms -slab overturning moment (N.m. ) 0.39198E+08
AV -vertical acceleration parameter 0.23218

Ge -effective specific gravity 0.90441
wa -resisting annulus force (kN./m. ) 33.436

wt -tank + roof weight at shell base (kN./m. ) 9.7316
J -the anchorage ratio 2.8140
L -reqd min annular plate projection (mm. ) 0.00000
Anchorage ratio too large, anchors needed
N -number of anchor bolts required 16

Sc -shell compressive stress (N./sq.mm. ) 18.005
Sa -shell allowable stress (N./sq.mm. ) 46.032
Height of sloshing wave (mm. ) 157.7
Course Hoop Stress Hoop Allowable

(N./sq.mm. ) (N./sq.mm. )
1 93.268 218.25
2 120.69 218.25
3 100.31 218.25
4 78.424 218.25
5 73.372 218.25
6 40.290 218.25
7 15.150 218.25
Seismic Evaluation Summary.

Seismic shell stress check passed.
Base shear within limits.
Hoop stress within allowable.

ANCHOR BOLT DETAILS - Section 5.12

Case Uplift Allowable Load/Bolt

(kN ) Bolt Stress (kN )
(N./sq.mm. )
Design Pressure : 0.00000 140. 0.00000
Test Pressure : 0.00000 186. 0.00000
Failure Pressure : 0.00000 335. 0.00000
Wind Loading : 0.00000 268. 0.00000
Seismic OPE : 6848.8 268. 380.49
Design Press + Wind Load : 0.00000 186. 0.00000
Design Press + Seismic OPE : 6934.1 268. 385.23
Frangibility Pressure : 0.00000 335. 0.00000
ANCHOR BOLT RESULTS - Section 5.12
Case Number Bolt Bolt Stress

of Bolts Diameter (N./sq.mm. )
(in. )
Design Pressure : 18 2.205 0.
Test Pressure : 18 2.205 0.
Failure Pressure : 18 2.205 0.
Wind Loading : 18 2.205 0.
Seismic OPE : 18 2.205 245.
Design Press + Wind Load : 18 2.205 0.
Design Press + Seismic OPE : 18 2.205 248.
Frangibility Pressure : 18 2.205 0.
Final Anchor Bolt Spacing .............. (mm. ) 2652.90

Specified number of user bolts is sufficient.
Adpted:
18 x Anchor bolts M56
Quality: S355JR (Yield strength: 335MPa).

NOZZLE FLEXIBILITIES & LOADS - Appendix P

DESIGN TEST USER
DATA FOR NOZZLE: A1

Radial Stiffness (kN./mm. ) -0.80469 -1.3707 -1.3707
Long. Bending Stiff(N.m./deg ) -0.70333 -1.3129 -1.3129
Circ. Bending Stiff(N.m./deg ) -0.65223 -0.88453 -0.88453
Radial Deflection (mm. ) 0.27157E-01 0.22631E-01 0.22631E-01
Long. Rotation (deg. ) 0.10377E-01 0.86474E-02 0.86474E-02
Radial Force Multp (1/kN ) 2.3327 1.9911 1.9911

Long. Moment Multp (1/N.m. ) 0.27352E-01 0.23260E-01 0.23260E-01
Circ. Moment Multp (1/N.m. ) 0.49549E-02 0.37478E-02 0.37478E-02
Radial Force Limit (kN ) 0.42869E-01 0.50224E-01 0.50224E-01

+Long. Moment Limit(N.m. ) 3.6560 4.2992 4.2992
-Long. Moment Limit(N.m. ) -3.6560 -4.2992 -4.2992
Circ. Moment Limit (N.m. ) 20.182 26.683 26.683
DATA FOR NOZZLE: A2

Radial Stiffness (kN./mm. ) 0.00000 0.00000 0.00000
Long. Bending Stiff(N.m./deg ) 0.00000 0.00000 0.00000
Circ. Bending Stiff(N.m./deg ) 0.00000 0.00000 0.00000


DATA FOR NOZZLE: A3



DATA FOR NOZZLE: A4A5

Long. Bending Stiff(N.m./deg ) 22426. 32693. 32693.
Circ. Bending Stiff(N.m./deg ) 14801. 21422. 21422.


DATA FOR NOZZLE: B1

Radial Deflection (mm. ) 1.1588 0.98496 0.98496
Radial Force Multp (1/kN ) 0.38789E-01 0.32547E-01 0.32547E-01

Radial Force Limit (kN ) 2.5780 3.0725 3.0725

DATA FOR NOZZLE: B2R1



DATA FOR NOZZLE: B3

Long. Rotation (deg. ) -0.46367E-01 -0.49495E-01 -0.49495E-01


DATA FOR NOZZLE: O



DATA FOR NOZZLE: D,R2

Long. Rotation (deg. ) -0.16832 -0.14661 -0.14661


Circ. Moment Limit (N.m. ) 9635.7 13217. 13217.
DATA FOR NOZZLE: R3



DATA FOR NOZZLE: R5



DATA FOR NOZZLE: B5



DATA FOR NOZZLE: R5


Long. Rotation (deg. ) -0.37029 -0.30371 -0.30371


DATA FOR NOZZLE: T1T2

Radial Force Multp (1/kN ) 0.11343 0.98234E-01 0.98234E-01


TANK(c) Intergraph CADWorx & Analys

is Solutions, Inc. 2015
EXTERNAL PRESSURE RESULTS - Appendix V

DL roof plate dead load ..............(kPa ) 0.5

PR design external pressure ..........(kPa ) 2.8
For a Umbrella Roof:
Required thickness of roof plate .....(mm. ) 9.487
Length of roof considered in region ..(mm. ) 250.508
Required area of roof/shell joint ....(mm. **2) 1370.770
Required area of top stiffener ......(mm. **2) 0.000
Length of shell included (top) .......(mm. ) 127.348
Length of shell included (bottom) ....(mm. ) 180.097
Transformed Shell Height .............(mm. ) 7876.389
Elastic Buckling Check V.8.1.1

Buckling Check Ok, exceeds 0.19 ................ 1.042
Ps design ext press for shell .......(kPa ) 0.898

Ps(max) max design external pressure (kPa ) 2.009
ts(min) min shell for design ext press (mm. ) 4.360
Stiffeners are not required for external pressure.

Anchor Chair Cap Input Values:
Thickness of Gusset Plates j 25.000 mm.

Width of Gussets at Top Plate twdt 200.000 mm.
Width of Gussets at Base Plate bwdt 200.000 mm.
Height of Gussets hg 415.000 mm.
Height of Gussets plus top Plate thickness h 450.000 mm.
Distance between Gussets g 136.000 mm.
Dist. from Bolt Center to Gusset (Rg/2) cg 68.000 mm.
External Corrosion Allowance Ca 0.0000 mm.
Top Plate allowable stress S 275.0 N./sq.mm.
Number of Gussets per bolt ng 2
Bottom Shell Course Thickness 12.000 mm.
Shell Course Corrosion Allowance 3.0000 mm.
Thickness of Tank Baseplate m 10.000 mm.
Thickness of Top Plate c 35.000 mm.

Radial Width of the Top Plate b 200.000 mm.
Circumferential Width of the Top Plate a 400.000 mm.
Anchor Bolt Diameter d 56.000 mm.
Anchor Chair Cap and Gusset Plate Analysis Results:
Required Thickness of Top Chair Cap Plate per AISI:

P Bolt Load
e Bolt eccentricity (center of bolt to shell OD)
Sb Allowable Bending Stress ( 1.5 * S )
g Distance between Gussets
d Bolt Diameter
Top Chair Cap Plate Required Thickness per AISI [Tc]:

= ( P /( Sb * e ) * ( 0.375 * g - 0.22 * d ))½ + c
= (385/(412*89.000)*(0.375*136.00-0.22*56.000))½+0.000
= 20.1471 mm.
Stress in the Top Plate at given Thickness [Stpl]:

= P( 0.375 * b - 0.22 * d ) / e / ( c - Ca )²
= 385 (0.375*136.000 - 0.22*56.000 )/89.000/(35.000 -0.000 )²
= 136.7 N./sq.mm., must be less than 412.5 N./sq.mm.
Required Gusset Thickness per AISI:

Gusset Plate Thickness is the greater of( 0.5 in (12mm), 0.04( hg ))
= max( 12.700, 0.04( 415.000 ) ) + Ca
= 16.600 mm.
For gusset plates the following must also be true:

Gusset Thickness * Average Gusset Width >= (P/1000)/25
= ( 25.000 - 0.000 ) * 200.000 > ( 0.385/25 ) Passed
= 5000.000 > 0.015 Passed
Local Stress at the Top Plate per AISI, including axial Stress [S]:
= P*e/t²[1.32*Z/(1.43*a*h²/(R*t)
+ (4(a)(h)²).333 + 0.031 /(R*t)½
= 385*89.00/9.00²[1.32*0.88/(1.43*400.00*(450.00)²/(7508.00*9.00)
+ (4*400.00 (450.00 )²)0.333 + 0.031/(7508.00 *9.00 )½
= 256.0 N./sq.mm.
Intermediate Value [Z]:

= 1/[(0.177*a*m/(R*t)½)*(m/t)² + 1]
= 1/[(0.177*400.000*10.000/(7508.000*9.000)½)*(10.000/9.000)²+1]
= 0.883
Radial Distance [e]:

= ( Dc - Ds ) / 2
= ( 15188.000 - 15010.000 )/2
= 89.000 mm.

Determine Maximum allowed Fluid Heights:
For Course # 1, Operating Case
Allowed fluid height above this course based on the 1ft method
= (Td - ca)Sd/(2.6 * D * G ) + X/12
= (0.4724 - 0.1181 )23800.00/(2.6 * 49.2 * 0.997 ) + 12.000/12
= 67.062 ft. [20440.488 mm.]
For Course # 1, Hydro Case, not corroded
= (Td - ca)Sd/(2.6 * D * G ) + X/12
= (0.4724 - 0.0000 )25500.00/(2.6 * 49.2 * 1.000 ) + 12.000/12
= 95.091 ft. [28983.773 mm.]
= (Td - ca)Sd/(2.6 * D * G ) + X/12
= (0.3150 - 0.1181 )23800.00/(2.6 * 49.2 * 0.997 ) + 12.000/12
= 37.701 ft. [11491.292 mm.]
= (Td - ca)Sd/(2.6 * D * G ) + X/12
= (0.3150 - 0.0000 )25500.00/(2.6 * 49.2 * 1.000 ) + 12.000/12
= 63.727 ft. [19424.115 mm.]
= (Td - ca)Sd/(2.6 * D * G ) + X/12
= (0.3150 - 0.1181 )23800.00/(2.6 * 49.2 * 0.997 ) + 12.000/12
= 37.701 ft. [11491.292 mm.]
= (Td - ca)Sd/(2.6 * D * G ) + X/12
= (0.3150 - 0.0000 )25500.00/(2.6 * 49.2 * 1.000 ) + 12.000/12
= 63.727 ft. [19424.115 mm.]
= (Td - ca)Sd/(2.6 * D * G ) + X/12
= (0.3150 - 0.1181 )23800.00/(2.6 * 49.2 * 0.997 ) + 12.000/12
= 37.701 ft. [11491.292 mm.]
= (Td - ca)Sd/(2.6 * D * G ) + X/12
= (0.3150 - 0.0000 )25500.00/(2.6 * 49.2 * 1.000 ) + 12.000/12
= 63.727 ft. [19424.115 mm.]
= (Td - ca)Sd/(2.6 * D * G ) + X/12
= (0.2362 - 0.1181 )23800.00/(2.6 * 49.2 * 0.997 ) + 12.000/12
= 23.021 ft. [7016.696 mm.]
= (Td - ca)Sd/(2.6 * D * G ) + X/12
= (0.2362 - 0.0000 )25500.00/(2.6 * 49.2 * 1.000 ) + 12.000/12

= 48.046 ft. [14644.287 mm.]
= (Td - ca)Sd/(2.6 * D * G ) + X/12
= (0.2362 - 0.1181 )23800.00/(2.6 * 49.2 * 0.997 ) + 12.000/12
= 23.021 ft. [7016.696 mm.]
= (Td - ca)Sd/(2.6 * D * G ) + X/12
= (0.2362 - 0.0000 )25500.00/(2.6 * 49.2 * 1.000 ) + 12.000/12
= 48.046 ft. [14644.287 mm.]
= (Td - ca)Sd/(2.6 * D * G ) + X/12
= (0.2362 - 0.1181 )23800.00/(2.6 * 49.2 * 0.997 ) + 12.000/12
= 23.021 ft. [7016.696 mm.]
= (Td - ca)Sd/(2.6 * D * G ) + X/12
= (0.2362 - 0.0000 )25500.00/(2.6 * 49.2 * 1.000 ) + 12.000/12
= 48.046 ft. [14644.287 mm.]
Appendix M Yield Stress reduction factor, M.3.6 [Mfact]:

= Yield Reduction Factor * Fy / Fyamb
= 1.000 * 38400.0/30000.0
= 1.000 Must be less than or equal to 1.0
Balanced Design Snow Load [Sb]:

= 0.84 * S
= 0.84 * 0.000
= 0.000 psf
Unbalanced Design Snow Load [Su]:

= 1.5 * Sb
= 1.5 * 0.000
= 0.000 psf
Total Design External Pressure Loading per 5.10.6.1 [Pr]:

= max[ DL + (Lr or Sb) + 0.4Pe, DL + Pe + 0.4(Lr or Sb) ]
= max[ 9.647 + max[ 44.825, 0.000 ] + 0.4 * 10.443,
9.647 + 10.443 + 0.4 * max[ 44.825, 0.000 ]]
= max[ 58.649, 38.019 ]
= 58.649 psf [2.808 kPa]

Wind Load Calculations:
Wind velocity factor 5.2.1 [Vfact]:

= ( Wind Velocity / 120 )^2
= ( 82.3/120 )^2
= 0.471
Vertical projected wind area of tank [VArea]:

= Tank Height * Tank Diameter
= 41.34 * 49.25
= 2035.735 ft^2 [189126000.000 mm.^2]
Wind moment on shell [Moment]:

= Wind Pressure * Wind Area * Tank Height/2
= 18.816 * 2035.7 * 41.34/2
= 0.10054E+07 ft.lb. [0.13630E+07 N.m.]
Vertical projected wind area of Dome/Umbrella roof:
Radius of the apex:

= 0.8 D
= 0.8 * 49.245
= 39.396 ft. [12008.000 mm.]
Half angle between tank and apex radii:

= asin( D / (2 * Rapex) )
= asin( 49.245/(2 * 39.396 ) )
= 38.683 deg.
Area of the sector:

= 2 * Half angle / ( 2 pi ) * ( pi * Rapex^2 )
= 2 * 0.675/( 2 * 3.142 ) * ( 3.142 * 39.396^2 )
= 1047.852 ft.^2 [97348600.000 mm.^2]
Height from apex to chord:

= Rapex * cos(Half angle)
= 39.396 * cos(0.675 )
= 30.754 ft. [9373.743 mm.]
Area of triangle below the chord line:

= Apex height * D/2
= 30.754 * 49.245/2
= 757.241 ft.^2 [70349944.000 mm.^2]
Dome/Umberlla roof area:

= Sector area - Triangle area
= 1047.852 - 757.241
= 290.611 ft.^2 [26998656.000 mm.^2]
Area Exposed to Wind:

= Wind area of tank + Wind area of roof
= 2035.735 + 290.611
= 2326.347 ft.^2 [216124656.000 mm.^2]
Wind Moment at the base including the dome/umbrella roof [Total Moment]:
= Moment + ( Wind P * Roof Area( Tank Height + dome Height/3))
= 1005374 + ( 18.816 * 290.6 ( 41.3 + 8.64/3))
= 1247175.000 ft.lb. [1690870.000 N.m.]
Wind shear force acting on the tank:

= Wind Pressure * (tank area + roof area)
= 18.816 * 2326.3
= 0.54109E+05 lbf. [0.24068E+03 kN]
Moment about shell-to-bottom joint [MDL]:

= ( Shell Weight + Attachement Weight + Framing Weight * % )D/2
= ( 51187.2 + 0.0 + 0.0 * 1.00 )49.2/2
= 1260368.2 ft.lb [1708756.9 N.m.]
Resisting Weight Of Fluid [WL]:

= min( 4.67 * tb * sqrt( Fby * H ), 0.45 * H * D )
= min( 4.67 * 0.3543 * sqrt( 39884.0 * 40.19 ), 0.45 * 40.2 * 49.25 )
= min( 2095.0, 890.6 )
= 890.6 lbf/ft [0.0 kN/mm.]
Moment from Fluid Weight [MF]:

= WL * ( PI * D ) * ( D / 2 )
= 890.6 * ( 3.1416 * 49.25 ) * ( 49.25/2 )
= 3392740.8 ft.lb [4599742.0 N.m.]
Moment from Design Internal Pressure [MPI]:

= Design Pressure * pi( Diameter in inches / 2 )^2 * ( D / 2 )
= 0.1 * 3.1416 ( 590.94 * 2 )^2 * ( 49.25/2 )
= 489756.9 ft.lb [663992.8 N.m.]
Moment about shell-to-bottom joint [MWS]:

= 18. * Vfact (D + Insulation) * H^2 / 2
= 18. * 0.4706 (49.2 + 0.0 ) * 41.3^2/2
= 356418.2 ft.lb [483217.5 N.m.]
Moment about shell-to-bottom joint [MW]:

= MWS + Wind Uplift * VArea * D / 2
= 356418.2 + 0.0000 * 274273.5 * 49.2/2
= 356418.2 ft.lb [483217.5 N.m.]
Note: Wind Uplift value of 0.098 reset to 1.6 * Design Pressure per 5.2.1.K.2
Moment about shell-to-bottom joint [MDLR]:

= ( Roof Weight )D/2
= ( 21133.1 )49.2/2
= 520353.9 ft.lb [705475.0 N.m.]

Determine required thickness per the selected Method:
Shell Course Thickness per the One Foot Method:
Required Thickness for Course # 1
Required thickness based on the 1ft method per 5.6.3.2, Operating [td]:
= 2.6D( H - 1 )G/Sd
= 2.6 * 49.245 ( 40.19 - 1 )0.997/23800.0
= 0.210 in. [5.339 mm.]
Minimum thickness per 5.6.1.1 : = 0.328 in. [8.339 mm.]
Final Selected Thickness including corrosion and other allowances:

= 0.32831 in. [8.33912 mm.]
Required thickness per 5.6.3.2, Hydrotest [tt]:

= 2.6D( H - 1 )/St
= 2.6 * 49.245 ( 40.19 - 1 )/25500.0
= 0.19678 in. [4.99817 mm.]
Final Selected Thickness including other Code allowances:

= 0.23622 in. [6.00000 mm.]
= 2.6D( H - 1 )G/Sd
= 2.6 * 49.245 ( 33.63 - 1 )0.997/23800.0
= 0.175 in. [4.445 mm.]

= 0.29312 in. [7.44518 mm.]

= 2.6D( H - 1 )/St
= 2.6 * 49.245 ( 33.63 - 1 )/25500.0
= 0.16383 in. [4.16132 mm.]

= 0.19685 in. [5.00000 mm.]
= 2.6D( H - 1 )G/Sd
= 2.6 * 49.245 ( 27.07 - 1 )0.997/23800.0
= 0.140 in. [3.551 mm.]

= 0.25792 in. [6.55125 mm.]

= 2.6D( H - 1 )/St
= 2.6 * 49.245 ( 27.07 - 1 )/25500.0
= 0.13088 in. [3.32447 mm.]

= 0.19685 in. [5.00000 mm.]
= 2.6D( H - 1 )G/Sd
= 2.6 * 49.245 ( 20.51 - 1 )0.997/23800.0
= 0.105 in. [2.657 mm.]

= 0.22273 in. [5.65731 mm.]

= 2.6D( H - 1 )/St
= 2.6 * 49.245 ( 20.51 - 1 )/25500.0
= 0.09794 in. [2.48762 mm.]

= 0.19685 in. [5.00000 mm.]
= 2.6D( H - 1 )G/Sd
= 2.6 * 49.245 ( 13.94 - 1 )0.997/23800.0
= 0.069 in. [1.763 mm.]

= 0.18753 in. [4.76338 mm.]

= 2.6D( H - 1 )/St
= 2.6 * 49.245 ( 13.94 - 1 )/25500.0
= 0.06499 in. [1.65077 mm.]

= 0.19685 in. [5.00000 mm.]
= 2.6D( H - 1 )G/Sd
= 2.6 * 49.245 ( 7.38 - 1 )0.997/23800.0
= 0.034 in. [0.869 mm.]

= 0.19685 in. [5.00000 mm.]

= 2.6D( H - 1 )/St
= 2.6 * 49.245 ( 7.38 - 1 )/25500.0
= 0.03204 in. [0.81392 mm.]

= 0.19685 in. [5.00000 mm.]
= 2.6D( H - 1 )G/Sd
= 2.6 * 49.245 ( 2.46 - 1 )0.997/23800.0
= 0.008 in. [0.199 mm.]

= 0.19685 in. [5.00000 mm.]

= 2.6D( H - 1 )/St
= 2.6 * 49.245 ( 2.46 - 1 )/25500.0
= 0.00733 in. [0.18628 mm.]

= 0.19685 in. [5.00000 mm.]

Appendix F Calculations:
Nominal Tank Weight

= Shell Weight + Roof Weight + Framing Weight + Attachment Weight
= 82035.3 + 21133.1 + 0.0 + 0.0
= 103168.4 lb. [458.9 kN]
Note: The uplift was less than the total weight.
Appendix M Yield Stress reduction factor, M.3.6 [Mfact]:

= Yield Reduction Factor * Fy / Fyamb
= 1.000 * 38400.0/30000.0
= 1.000 Must be less than or equal to 1.0
Note: Using the new roof weight in Appendix F calcs. There was no corrosion
allowance specified on the roof plates.
Note: The tank is considered anchored since anchor bolts are specified,
therefore Appendix F.4.2 calculations are not required.
Required Area of the Roof/Shell Junction per F.5.1 [A]:

= D^2(Pi-0.245*DLR/D^2)/(0.962*Fy(tan(theta)))
= 49.2^2(2.008 -0.245*21133/49.2^2)/(0.962*38400.0 (tan(25.47 )))
= 0.000 in.^2
Maximum Frangible Roof Area 5.10.2.6 [A]:

= DLs/( 2 * pi * Fy * tan(theta))
= 82035.3/( 2 * pi * 38400.0 * tan(25.47 ))
= 0.714 in.^2 [460.621 mm.^2]

Bolt Load Calculations:
Compute weight per table 5.21b [W1]:

= Corroded Shell Weight + Attachment Weight + Roof Weight * %
= 51187.2 + 0.0 + 0.0 * 1.00
= 51187.2 lb. [227.7 kN]

= Corroded Shell Weight + Attachment Weight + ( Framing + Roof Weight ) * %
= 51187.2 + 0.0 + (21133.1 + 0.0 ) * 1.00
= 72320.3 lb. [321.7 kN]

= Nominal Weight + Attachment Weight + Roof Weight * %
= 82035.3 + 0.0 + 0.0 * 1.00
= 82035.3 lb. [364.9 kN]
Net Uplift due to Design Pressure:

= [(P - 8 * th )D^2 * 4.08 ] - W1
= [(0.000 - 8 * 0.236 )49.2^2 * 4.08 ] - 51187.2
= -69885.4 lb. [-310.9 kN]
Net Uplift due to Test Pressure:

= [(Pt - 8 * th )D^2 * 4.08 ] - W1
= [(2.008 - 8 * 0.236 )49.2^2 * 4.08 ] - 51187.2
= -50014.2 lb. [-222.5 kN]
Net Uplift due to Failure Pressure:

= [(1.5 * Pf - 8 * th )D^2 * 4.08 ] - W3
= [(1.5 * 0.000 - 8 * 0.236 )49.2^2 * 4.08 ] - 82035.3
= -100733.4 lb. [-448.1 kN]
Net Uplift due to Wind Pressure:

= PWR * D^2 * 4.08 + [4 * MWH/D] - W2
= 0.000 * 49.2^2 * 4.08 + [4 * 356418/49.2 ] - 72320.3
= -43370.0 lb. [-192.9 kN]
Net Uplift due to Seismic:

= [ 4 * MRW/D ] - W2( 1 - 0.4*Av)
= [ 4 * 19764070/49.2 ] - 72320.3 ( 1 - 0.4 * 0.23218 )
= 1539749.6 lb. [6848.8 kN]
Net Uplift due to Seismic Test condition:

= [ 4 * MRW/D ] - W2( 1 - 0.4*Av)
= [ 4 * 19764070/49.2 ] - 72320.3 ( 1 - 0.4 * 0.23218 )
= 1539749.6 lb. [6848.8 kN]
Net Uplift due to Design Pressure + Wind:

= [(Fp * P + PWR - 8*th )D^2 * 4.08] + [4*MWH/D] - W1
= [(0.40*0.000+0.00-8*0.236)49.2^2*4.08]+[4*356418/49.2]-51187.2
= -22236.9 lb. [-98.9 kN]
Net Uplift due to Design Pressure + Seismic:

= [(Fp * P - 8*th )D^2 * 4.08] + [4*MRW/D] - W1( 1 - 0.4 * Av)
= [(0.40 * 0.000 - 8*0.236 )49.2^2 * 4.08] + [4*19764070/49.2 ] -
51187.2 ( 1 - 0.4 * 0.23218 )
= 1558920.0 lb. [6934.1 kN]
Net Uplift due to Design Pressure + Seismic Test:

= [(Fp * P - 8*th )D^2 * 4.08] + [4*MRW/D] - W1( 1 - 0.4 * Av)
= [(0.40 * 0.000 - 8*0.236 )49.2^2 * 4.08] + [4*19764070/49.2 ] -
51187.2 ( 1 - 0.4 * 0.23218 )
= 1558920.0 lb. [6934.1 kN]
Net Uplift due to Frangibility Pressure:

= [(3 * Pf - 8 * th)D^2 * 4.08] - W3
= [(3 * 0.000 - 8 * 0.236 )49.2^2 * 4.08] - 82035.3
= -100733.4 lb. [-448.1 kN]
Initial Bolt Design for each Load Case (inches and psi):
Anchor Bolt Database: TEMA-Metric
Case Number, Diameter, Stress

---------------------------------------------------------------
Design Pressure 18 1.2205 0.00000
Test Pressure 18 1.2205 0.00000
Failure Pressure 18 1.2205 0.00000
Wind Loading 18 1.2205 0.00000
Seismic OPE 18 2.2047 35483.
Seismic Test 18 2.2047 35483.
Design Press + Wind Load 18 1.2205 0.00000
Design Press + Seismic OPE 18 2.2047 35925.
Design Press + Seismic Test 18 2.2047 35925.
Frangibility Pressure 18 1.2205 0.00000
Final Bolt Design for each Load Case (inches and psi):
Case Number, Diameter, Stress

---------------------------------------------------------------
Design Pressure 18 2.2047 0.00000
Test Pressure 18 2.2047 0.00000
Failure Pressure 18 2.2047 0.00000
Wind Loading 18 2.2047 0.00000
Seismic OPE 18 2.2047 35483.
Seismic Test 18 2.2047 35483.
Design Press + Wind Load 18 2.2047 0.00000
Design Press + Seismic OPE 18 2.2047 35925.
Design Press + Seismic Test 18 2.2047 35925.
Frangibility Pressure 18 2.2047 0.00000
Adpted:
18 x Anchor bolts M56
Quality: S355JR (Yield strength: 335MPa).

Appendix E Seismic Analysis Calculations:
Period Parameter per E.2.2 [Ts]:

= 0.000 sec.
Sloshing Period Coefficient per E.4.5.2-c [Ks]:

= 0.578 / sqrt( hyperbolic tangent(3.68 * HL / D ) )
= 0.578/sqrt( hyperbolic tangent(3.68 * 40.190/49.245 ) )
= 0.579
Convective Sloshing Period per E.4.5.2-b [Tc]:

= Ks*sqrt(D)
= 0.579 * sqrt ( 49.245 )
= 4.066 sec.
Impulsive Spectral Accel. for SS Spectra per E.4.6.2-1 [Ai]:

= 2.5 * Q * (I / Rwi) * Sa0
= 2.5 * 1.000 * (1.200/4.000 ) * 0.463
= 0.348 %g
Convective Spectral Accel. for SS Spectra [Ac]:

= min( (Q * K * (I / Rwc) * Sa) , Ai)
= min( (1.000 * 1.500 * (1.200/2.000 ) * 0.077 ), 0.348 )
= 0.069
Convective Weight per E.6.1.1-3 [Wc]:

= 0.230 (D/H) * Wp * tanh( 3.67 (H/D) )
= 0.230 (49.25/40.19 ) * 4757296 * tanh( 3.67 (40.19/49.25 ) )
= 1334008.875 lb. [5933.671 kN]
Impulsive Weight per E.6.1.1-2 [Wi]:

= Wp * ( 1.0 - 0.218 (D/H) )
= 4757296 * ( 1.0 - 0.218 (49.245/40.190 ) )
= 3486543.000 lb. [15508.143 kN]
Convective Liquid Base Shear per E.6.1-3 [Vc]:

= Ac * Wc
= 0.069300 * 1334008
= 92446.820 lb. [411.203 kN]
Impulsive Liquid Base Shear per E.6.1-2 [Vi]:

= Ai( Ws + Wr + Wf + Wi )
= 0.348 ( 82035.266 + 21133.094 + 35793.168 + 3486543 )
= 1260316.000 lb. [5605.885 kN]
Total Design Base Shear per E.6.1-1 [V]:

= sqrt( Vc^2 + Vi^2 )
= sqrt( 92446.820^2 + 1260316^2 )
= 1263702.000 lb. [5620.946 kN]
Ringwall Convective Moment Arm per E.6.1.2.1-3 [Xc]:

= (1.0 - (cosh(3.67 (H / D)) - 1.0)
/ (3.67 (H / D) * sinh(3.67 (H / D))))*H
= (1.0 - (cosh(3.67 (40.190/49.245 )) - 1.0)
/(3.67 (40.190 /49.245 ) * sinh(3.67 (40.190 /49.245 ))))*40.190
= 28.051 ft. [8549.806 mm.]
Ringwall Impulsive Moment Arm per E.6.1.2.1-2 [Xi]:

= H * ( 0.5 - 0.094 (D / H) )
= 40.190 * ( 0.5 - 0.094 (49.245/40.190 ) )
= 15.466 ft. [4714.060 mm.]
Slab Convective Moment Arm per E.6.1.2.2-3 [Xcs]:

= (1.0 - (cosh(3.67 (H / D)) - 1.937)
/ (3.67 (H / D) * sinh(3.67 (H / D)) ) ) * H
= (1.0 - (cosh(3.67 (40.190/49.245 )) - 1.937)
/(3.67 (40.190 /49.245 ) * sinh(3.67 (40.190 /49.245 ))))*40.190
= 29.312 ft. [8934.209 mm.]
Slab Impulsive Moment Arm per E.6.1.2.2-2 [Xis]:

= H * ( 0.500 + ( 0.0600 * D / H ) )
= 40.190 * ( 0.500 + ( 0.0600 * 49.245/40.190 ) )
= 23.050 ft. [7025.600 mm.]
Ringwall Overturning Moment per E.6.1.5-1 [Mrw]:

= sqrt( ( Ai ( Wi * Xi + Ws * Xs
+ Wr * Xr ) )^2
+ ( Ac * Wc * Xc )^2 )
= sqrt( ( 0.348 ( 3486543 * 15.466 + 82035.266 * 18.086
+ 21133.094 * 45.247 ) )^2
+ ( 0.069 * 1334008 * 28.051 )^2 )
= 19764070.000 ft.lb.
Slab Overturning Moment per E.6.1.5-2 [Ms]:

= sqrt( ( Ai ( Wi * Xis + Ws * Xs
+ WR * XR ) ) ^2
+ ( Ac * Wc * Xcs ) ^2 )
= sqrt( ( 0.348 ( 3486543 * 23.050 + 82035.266 * 18.086
+ 21133.094 * 45.247 ) )^2
+ ( 0.069 * 1334008 * 28.051 )^2 )
= 28912102.0 ft.lb.
Vertical Acceleration Parameter per E.6.1.3 [Av]:

= 0.232180 %g
Effective Specific Gravity per E.2.2 [Ge]:

= ( 1 - ( 0.4 * Av ) ) * G
= ( 1 - ( 0.4 * 0.232 ) ) * 0.997
= 0.904
Resisting Annulus Force per E.6.2.1.1-1b [wa]:

= min( ( 7.9 * ta * sqrt( Fy * H * Ge ) )
, ( 1.28 * H * D * Ge ) )
= min( ( 7.9 * 0.276 * sqrt( 39883.973 * 40.190 * 0.904 ) )
, ( 1.28 * 40.190 * 49.245 * 0.904 ) )
= min( 2621.398, 2291.187 )
= 2291.187 lb./ft. [0.033 kN/mm.]
Tank + Roof Weight at Shell Base per E.6.2.1.1.1-2 [wt]:

= ( Wrs / ( D * pi) ) + ( WS / ( D * pi ) )
= ( 21133.094/( 49.245 * 3.142 ) ) + ( 82035.266/( 49.245 * 3.142 ) )
= 666.854 lb./ft. [0.010 kN/mm.]
The Anchorage Ratio per E.6.2.1.1.1-1 [J]:

= Mrw/(D^2 (wt * (1 - (0.4 * Av)) + wa))
= 19764070/(49.245^2(666.854 *(1.0-(0.4*0.232 ))+2291.187 ))
= 2.814038
Anchorage ratio too large; anchors needed
Number of Anchor Bolts Required [nA]:

= max( int( (PI * D / 10) + .999 ), 4 )
= max( int( (3.142 * 49.245/10) + .999 ), 4 )
= 16 bolts
Adopted: 18 bolts
Shell Compressive Stress per E.6.2.2.1-1b [Sc]:

= (wt (1.0 + 0.4 * Av) + (1.273 * Mrw / (D^2)))
/ ( 12.0 * ts )
= (666.854 (1.0 + 0.4 * 0.232 ) + (1.273 * 19764070/(49.245^2)))
/( 12.0 * 0.354 )
= 2611.363 psi [18.005 N./sq.mm.]
Shell Allowable Stress [Sa/Fc]:

= min ((1.0E6 * ts / (2.5 * D))
+ (600 * sqrt(G * H)),(Fty / 2))
= min ((1.0E6 * 0.354/(2.5 * 49.245 ))
+ (600 * sqrt(0.997 * 40.190 )),(38400.000/2))
= 6676.120 psi [46.032 N./sq.mm.]
Seismic Hoop combined Force/Stress Calculations for Shell Course: 7
Impulsive Hoop Membrane Force per E.6.1.4-2b [Ni]:

= (2.77 * Ai * G * D^2)
* ((Y / D * 0.75) - (0.5 (Y / D * 0.75)^2))
= (2.77 * 0.348 * 0.997 * 49.245^2)
* ((2.461/49.245 * 0.75) - (0.5 (2.461/49.245 * 0.75)^2))
= 149.942 lb./in. [0.026 kN/mm.]
Convective Hoop Membrane Force per E.6.1.4-4b [Nc]:

= cosh ( 3.68 ( H - Y ) / D )
/ cosh ( 3.68 * H / D )
* 0.98 * Ac * G * D^2
= cosh ( 3.68 ( 40.190 - 2.461 )/49.245 )
/cosh ( 3.68 * 40.190 /49.245 )
* 0.98 * 0.069 * 0.997 * 49.245^2
= 136.774 lb./in. [0.024 kN/mm.]
Product Hydrostatic Membrane Force [Nh]:

= 0.0361 * G * Y * 12.0 * D * 12.0 / 2.0
= 0.0361 * 0.997 * 2.461 * 12.0 * 49.245 * 12.0/2.0
= 314.012 lb./in. [0.055 kN/mm.]
Total Combined Hoop Stress per E.6.1.4-6:

= (sqrt( Ni^2 + Nc^2 + (AV * Nh / 2.5)^2 ) + Nh) / Thk
= (sqrt(149.942^2+136.774^2+(0.232*314.012/2.5)^2)+314.012)/0.236
= 2197.308 psi [15.150 N./sq.mm.]
Seismic Hoop Allowable for Shell Course: 7
Allowable Hoop Stress per E.6.2.4:

= min( [0.9 * min( Fy, Fyweld ) * je], ShellAll * 1.33)
= min( [0.9 * min( 38400, 39883 ) * 1.00 ], 23800 * 1.33)
= 31654.0 psi [218.3 N./sq.mm.]

= (2.77 * Ai * G * D^2)
* ((Y / D * 0.75) - (0.5 (Y / D * 0.75)^2))
= (2.77 * 0.348 * 0.997 * 49.245^2)
* ((7.382/49.245 * 0.75) - (0.5 (7.382/49.245 * 0.75)^2))
= 418.825 lb./in. [0.073 kN/mm.]

= cosh ( 3.68 ( H - Y ) / D )
/ cosh ( 3.68 * H / D )
* 0.98 * Ac * G * D^2
= cosh ( 3.68 ( 40.190 - 7.382 )/49.245 )
/cosh ( 3.68 * 40.190 /49.245 )
* 0.98 * 0.069 * 0.997 * 49.245^2
= 95.051 lb./in. [0.017 kN/mm.]

= 0.0361 * G * Y * 12.0 * D * 12.0 / 2.0
= 0.0361 * 0.997 * 7.382 * 12.0 * 49.245 * 12.0/2.0
= 942.037 lb./in. [0.165 kN/mm.]

= (sqrt(418.825^2+95.051^2+(0.232*942.037/2.5)^2)+942.037)/0.236
= 5843.410 psi [40.290 N./sq.mm.]

= min( [0.9 * min( 38400, 39883 ) * 1.00 ], 23800 * 1.33)
= 31654.0 psi [218.3 N./sq.mm.]

= (2.77 * Ai * G * D^2)
* ((Y / D * 0.75) - (0.5 (Y / D * 0.75)^2))
= (2.77 * 0.348 * 0.997 * 49.245^2)
* ((13.944/49.245 * 0.75) - (0.5 (13.944/49.245 * 0.75)^2))
= 713.037 lb./in. [0.125 kN/mm.]

= cosh ( 3.68 ( H - Y ) / D )
/ cosh ( 3.68 * H / D )
* 0.98 * Ac * G * D^2
= cosh ( 3.68 ( 40.190 - 13.944 )/49.245 )
/cosh ( 3.68 * 40.190 /49.245 )
* 0.98 * 0.069 * 0.997 * 49.245^2
= 58.926 lb./in. [0.010 kN/mm.]

= 0.0361 * G * Y * 12.0 * D * 12.0 / 2.0
= 0.0361 * 0.997 * 13.944 * 12.0 * 49.245 * 12.0/2.0
= 1779.404 lb./in. [0.312 kN/mm.]

= (sqrt(713.037^2+58.926^2+(0.232*1779.404/2.5)^2)+1779.404)/0.236
= 10641.365 psi [73.372 N./sq.mm.]

= min( [0.9 * min( 38400, 39883 ) * 1.00 ], 23800 * 1.33)
= 31654.0 psi [218.3 N./sq.mm.]

= (2.77 * Ai * G * D^2)
* ((Y / D * 0.75) - (0.5 (Y / D * 0.75)^2))
= (2.77 * 0.348 * 0.997 * 49.245^2)
* ((20.505/49.245 * 0.75) - (0.5 (20.505/49.245 * 0.75)^2))
= 933.765 lb./in. [0.164 kN/mm.]

= cosh ( 3.68 ( H - Y ) / D )
/ cosh ( 3.68 * H / D )
* 0.98 * Ac * G * D^2
= cosh ( 3.68 ( 40.190 - 20.505 )/49.245 )
/cosh ( 3.68 * 40.190 /49.245 )
* 0.98 * 0.069 * 0.997 * 49.245^2
= 37.254 lb./in. [0.007 kN/mm.]

= 0.0361 * G * Y * 12.0 * D * 12.0 / 2.0
= 0.0361 * 0.997 * 20.505 * 12.0 * 49.245 * 12.0/2.0
= 2616.770 lb./in. [0.458 kN/mm.]

= (sqrt(933.765^2+37.254^2+(0.232*2616.770/2.5)^2)+2616.770)/0.315
= 11373.996 psi [78.424 N./sq.mm.]

= min( [0.9 * min( 38400, 39883 ) * 1.00 ], 23800 * 1.33)
= 31654.0 psi [218.3 N./sq.mm.]

= (2.77 * Ai * G * D^2)
* ((Y / D * 0.75) - (0.5 (Y / D * 0.75)^2))
= (2.77 * 0.348 * 0.997 * 49.245^2)
* ((27.067/49.245 * 0.75) - (0.5 (27.067/49.245 * 0.75)^2))
= 1081.009 lb./in. [0.189 kN/mm.]

= cosh ( 3.68 ( H - Y ) / D )
/ cosh ( 3.68 * H / D )
* 0.98 * Ac * G * D^2
= cosh ( 3.68 ( 40.190 - 27.067 )/49.245 )
/cosh ( 3.68 * 40.190 /49.245 )
* 0.98 * 0.069 * 0.997 * 49.245^2
= 24.720 lb./in. [0.004 kN/mm.]

= 0.0361 * G * Y * 12.0 * D * 12.0 / 2.0
= 0.0361 * 0.997 * 27.067 * 12.0 * 49.245 * 12.0/2.0
= 3454.137 lb./in. [0.605 kN/mm.]

= (sqrt(1081.009^2+24.720^2+(0.232*3454.137/2.5)^2)+3454.137)/0.315
= 14547.883 psi [100.308 N./sq.mm.]

= min( [0.9 * min( 38400, 39883 ) * 1.00 ], 23800 * 1.33)
= 31654.0 psi [218.3 N./sq.mm.]

= (2.77 * Ai * G * D^2)
* ((Y / D * 0.75) - (0.5 (Y / D * 0.75)^2))
= (2.77 * 0.348 * 0.997 * 49.245^2)
* ((33.629/49.245 * 0.75) - (0.5 (33.629/49.245 * 0.75)^2))
= 1154.768 lb./in. [0.202 kN/mm.]

= cosh ( 3.68 ( H - Y ) / D )
/ cosh ( 3.68 * H / D )
* 0.98 * Ac * G * D^2
= cosh ( 3.68 ( 40.190 - 33.629 )/49.245 )
/cosh ( 3.68 * 40.190 /49.245 )
* 0.98 * 0.069 * 0.997 * 49.245^2
= 18.250 lb./in. [0.003 kN/mm.]

= 0.0361 * G * Y * 12.0 * D * 12.0 / 2.0
= 0.0361 * 0.997 * 33.629 * 12.0 * 49.245 * 12.0/2.0
= 4291.504 lb./in. [0.752 kN/mm.]

= (sqrt(1154.768^2+18.250^2+(0.232*4291.504/2.5)^2)+4291.504)/0.315
= 17504.582 psi [120.694 N./sq.mm.]

= min( [0.9 * min( 38400, 39883 ) * 1.00 ], 23800 * 1.33)
= 31654.0 psi [218.3 N./sq.mm.]

= 1.39 * Ai * G * D^2
= 1.39 * 0.348 * 0.997 * 49.245^2
= 1168.295 lb./in. [0.205 kN/mm.]

= cosh ( 3.68 ( H - Y ) / D )
/ cosh ( 3.68 * H / D )
* 0.98 * Ac * G * D^2
= cosh ( 3.68 ( 40.190 - 40.190 )/49.245 )
/cosh ( 3.68 * 40.190 /49.245 )
* 0.98 * 0.069 * 0.997 * 49.245^2
= 16.256 lb./in. [0.003 kN/mm.]

= 0.0361 * G * Y * 12.0 * D * 12.0 / 2.0
= 0.0361 * 0.997 * 40.190 * 12.0 * 49.245 * 12.0/2.0
= 5128.870 lb./in. [0.898 kN/mm.]

= (sqrt(1168.295^2+16.256^2+(0.232*5128.870/2.5)^2)+5128.870)/0.472
= 13526.855 psi [93.268 N./sq.mm.]

= min( [0.9 * min( 38400, 39883 ) * 1.00 ], 23800 * 1.33)
= 31654.0 psi [218.3 N./sq.mm.]
Shear Resistance Force per E.7.6-1 [Vs]:

= MU ( WS + WR + WF + Wfluid ) * ( 1.0 - 0.4 * AV )
= 0.400 (82035.266 +21133.094 +35793.168 +4757296 )*(1.0-0.4*0.232 )
= 1776613.125 lb. [7902.375 kN]

Nozzle Stiffness Calculations:
Design Case [Nozzle 1 ] per PVP-1279:
Characteristic parameter per P.2.3 [beta]:

= 1.285 / (Rt)^0.5
= 1.285/(295.472 * 0.591 )^0.5
= 0.97278E-01 1/in. [0.38299E-02 1/mm.]
Unrestrained radial growth of the shell per P.2.5.1 [W]:

= (0.036*G*H*R^2)/Et
* [1-(e^-(beta*L)) * cos(beta*L) - (L/H)]
+ alpha * R * delta[T]
= (0.036*0.997 *482.283 *295.472^2)/29297584 *0.591
* [1-(e^-(0.097 *476.380 )) * cos(0.097 *476.380 ) - (476.380/482.28 )]
+ 0.667E+01 * 295.472 * 0.000
= 0.00107 in. [0.02716 mm.]
Unrestrained shell rotation of the shell per P.2.5.2 [theta]:

= (0.036*G*H*R^2)/E*t
* [(1/H)-(beta*e^-(beta*L))
* [cos(beta*L)+sin(beta*L)]]
= (0.036*0.997 *482.283 *295.472^2)/29297584 *0.591
* [(1/482.283 )-(0.097 *e^-(0.097 *476.380 ))
* [cos(0.097 *476.380 )+sin(0.097 *476.380 )]]
= 0.10377E-01 deg
Value of lamda per P.2.3 [lamda]:

= a/(Rt)^0.5
= 1.500/(295.472 * 0.591 )^0.5
= 0.114
Coefficient XA per P.2.3:

= L + a
= 476.380 + 1.500
= 477.880 in. [12138.152 mm.]
Coefficient XB per P.2.3:

= L - a
= 476.380 - 1.500
= 474.880 in. [12061.952 mm.]
Coefficient XC per P.2.3:

= L
= 476.380 in. [12100.052 mm.]
Coefficients YF and YL from figure P-4A based on lamda:

YF = 3.642
YL = 16.306
Coefficient YC from figure P-4B based on lamda:

YC = 90.012
Pressure end load on the opening per P.2.3:

= pi * a^2 * P
= 3.1415 * 1.500^2 * 0.213
= 1.502 lbf. [0.007 kN]
Radial force nomogram limit values per figure P-3A:

= max[(1 - 0.75)(XA / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(477.880/(295.472 *0.591 )^0.5), 0.1]
= 0.100
Longitudinal nomogram limit values per figure P-3A:

= max[(1 - 0.75)(XB / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(474.880/(295.472 *0.591 )^0.5), 0.1]
= 0.100
Circumferential moment nomogram limit value per figure P-3B:

= max[(1 - 0.75)(XC / (Rt)^0.5), 0.1]

= max[(1 - 0.75)(476.380/(295.472 *0.591 )^0.5), 0.1]
= 0.100
Radial force multiplier per figure P-3A:

= lamda / (2 * YF * FP)
= 0.114/(2 * 3.642 * 1.502 )
= 0.10376E-01 1/lbf. [0.23327E+01 1/kN]
Longitudinal moment multiplier per figure P-3A:

= lamda / (a / 12.0 * YL * FP)
= 0.114/(1.500/12.0 * 16.306 * 1.502 )
= 0.37083E-01 1/ft.lb. [0.27352E-01 1/N.m.]
Circumferential moment multiplier per figure P-3B:

= lamda / (a * 12.0 * YC * FP)
= 0.114/(1.500 * 12.0 * 90.012 * 1.502 )
= 0.67177E-02 1/ft.lb. [0.49549E-02 1/N.m.]
Radial force limit [ML = 0 and MC = 0] per figure P-3A [FRmax]:

= Radial force nomogram limit value / Radial force multp.
= 0.100/0.104E-01
= 0.96378E+01 lbf. [0.42869E-01 kN]
Positive Long. moment limit [MC = 0 and FR = 0] per figure P-3A [MLmax]:
= Long. moment nomogram limit value / Long. moment multiplier
= 0.100/0.371E-01
= 0.26967E+01 ft.lb. [0.36560E+01 N.m.]
Negative Long. moment limit [ML = 0 and MC = 0] per figure P-3A [MLmin]:
= - Radial Force nomogram limit value / Long. moment multiplier
= -0.100/0.371E-01
= -.26967E+01 ft.lb. [-0.36560E+01 N.m.]
Circ. moment limit [ML = 0 and FR = 0] per figure P-3B [MCmax]:

= Circ. moment nomogram limit value / Circ. moment multiplier
= 0.100/0.672E-02
= 0.14886E+02 ft.lb. [0.20182E+02 N.m.]
Test Case [Nozzle 1 ] per PVP-1279:

= 1.285 / (Rt)^0.5
= 1.285/(295.472 * 0.709 )^0.5
= 0.88803E-01 1/in. [0.34962E-02 1/mm.]

= (0.036*G*H*R^2)/Et
= (0.036*0.997 *482.283 *295.472^2)/29297584 *0.709
* [1-(e^-(0.089 *476.380 )) * cos(0.089 *476.380 ) - (476.380/482.28 )]
+ 0.667E+01 * 295.472 * 0.000
= 0.00089 in. [0.02263 mm.]

= (0.036*G*H*R^2)/E*t
= (0.036*0.997 *482.283 *295.472^2)/29297584 *0.709
* [(1/482.283 )-(0.089 *e^-(0.089 *476.380 ))
* [cos(0.089 *476.380 )+sin(0.089 *476.380 )]]
= 0.86474E-02 deg

= a/(Rt)^0.5
= 1.500/(295.472 * 0.709 )^0.5
= 0.104

= L + a
= 476.380 + 1.500
= 477.880 in. [12138.152 mm.]

= L - a
= 476.380 - 1.500
= 474.880 in. [12061.952 mm.]

= L
= 476.380 in. [12100.052 mm.]

YF = 3.895
YL = 17.504

YC = 108.636

= pi * a^2 * P
= 3.1415 * 1.500^2 * 0.213
= 1.502 lbf. [0.007 kN]

= max[(1 - 0.75)(XA / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(477.880/(295.472 *0.709 )^0.5), 0.1]
= 0.100

= max[(1 - 0.75)(XB / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(474.880/(295.472 *0.709 )^0.5), 0.1]
= 0.100

= max[(1 - 0.75)(XC / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(476.380/(295.472 *0.709 )^0.5), 0.1]
= 0.100

= lamda / (2 * YF * FP)
= 0.104/(2 * 3.895 * 1.502 )
= 0.88564E-02 1/lbf. [0.19911E+01 1/kN]

= lamda / (a / 12.0 * YL * FP)
= 0.104/(1.500/12.0 * 17.504 * 1.502 )
= 0.31535E-01 1/ft.lb. [0.23260E-01 1/N.m.]

= lamda / (a * 12.0 * YC * FP)
= 0.104/(1.500 * 12.0 * 108.636 * 1.502 )
= 0.50811E-02 1/ft.lb. [0.37478E-02 1/N.m.]

= 0.100/0.886E-02
= 0.11291E+02 lbf. [0.50224E-01 kN]
= 0.100/0.315E-01
= 0.31710E+01 ft.lb. [0.42992E+01 N.m.]
= -0.100/0.315E-01
= -.31710E+01 ft.lb. [-0.42992E+01 N.m.]

= 0.100/0.508E-02
= 0.19681E+02 ft.lb. [0.26683E+02 N.m.]
User Case [Nozzle 1 ] per PVP-1279:

= 1.285 / (Rt)^0.5
= 1.285/(295.472 * 0.709 )^0.5
= 0.88803E-01 1/in. [0.34962E-02 1/mm.]

= (0.036*G*H*R^2)/Et
= (0.036*0.997 *482.283 *295.472^2)/29297584 *0.709
* [1-(e^-(0.089 *476.380 )) * cos(0.089 *476.380 ) - (476.380/482.28 )]
+ 0.667E+01 * 295.472 * 0.000
= 0.00089 in. [0.02263 mm.]

= (0.036*G*H*R^2)/E*t
= (0.036*0.997 *482.283 *295.472^2)/29297584 *0.709
* [(1/482.283 )-(0.089 *e^-(0.089 *476.380 ))
* [cos(0.089 *476.380 )+sin(0.089 *476.380 )]]
= 0.86474E-02 deg

= a/(Rt)^0.5
= 1.500/(295.472 * 0.709 )^0.5
= 0.104

= L + a
= 476.380 + 1.500
= 477.880 in. [12138.152 mm.]

= L - a
= 476.380 - 1.500
= 474.880 in. [12061.952 mm.]

= L
= 476.380 in. [12100.052 mm.]

YF = 3.895
YL = 17.504

YC = 108.636

= pi * a^2 * P
= 3.1415 * 1.500^2 * 0.213
= 1.502 lbf. [0.007 kN]

= max[(1 - 0.75)(XA / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(477.880/(295.472 *0.709 )^0.5), 0.1]
= 0.100

= max[(1 - 0.75)(XB / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(474.880/(295.472 *0.709 )^0.5), 0.1]
= 0.100

= max[(1 - 0.75)(XC / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(476.380/(295.472 *0.709 )^0.5), 0.1]
= 0.100

= lamda / (2 * YF * FP)
= 0.104/(2 * 3.895 * 1.502 )
= 0.88564E-02 1/lbf. [0.19911E+01 1/kN]

= lamda / (a / 12.0 * YL * FP)
= 0.104/(1.500/12.0 * 17.504 * 1.502 )
= 0.31535E-01 1/ft.lb. [0.23260E-01 1/N.m.]

= lamda / (a * 12.0 * YC * FP)
= 0.104/(1.500 * 12.0 * 108.636 * 1.502 )
= 0.50811E-02 1/ft.lb. [0.37478E-02 1/N.m.]

= 0.100/0.886E-02
= 0.11291E+02 lbf. [0.50224E-01 kN]
= 0.100/0.315E-01
= 0.31710E+01 ft.lb. [0.42992E+01 N.m.]
= -0.100/0.315E-01
= -.31710E+01 ft.lb. [-0.42992E+01 N.m.]

= 0.100/0.508E-02
= 0.19681E+02 ft.lb. [0.26683E+02 N.m.]

= 1.285 / (Rt)^0.5
= 1.285/(295.472 * 0.354 )^0.5
= 0.12559E+00 1/in. [0.49443E-02 1/mm.]

= (0.036*G*H*R^2)/Et
= (0.036*0.997 *482.283 *295.472^2)/29297606 *0.354
* [1-(e^-(0.126 *476.400 )) * cos(0.126 *476.400 ) - (476.400/482.28 )]
+ 0.667E+01 * 295.472 * 0.000
= 0.00178 in. [0.04511 mm.]

= (0.036*G*H*R^2)/E*t
= (0.036*0.997 *482.283 *295.472^2)/29297606 *0.354
* [(1/482.283 )-(0.126 *e^-(0.126 *476.400 ))
* [cos(0.126 *476.400 )+sin(0.126 *476.400 )]]
= 0.17295E-01 deg

= a/(Rt)^0.5
= 1.000/(295.472 * 0.354 )^0.5
= 0.098

= L + a
= 476.400 + 1.000
= 477.400 in. [12125.960 mm.]

= L - a
= 476.400 - 1.000
= 475.400 in. [12075.159 mm.]

= L
= 476.400 in. [12100.560 mm.]

YF = 4.000
YL = 18.000

YC = 117.000

= pi * a^2 * P
= 3.1415 * 1.000^2 * 0.212
= 0.665 lbf. [0.003 kN]

= max[(1 - 0.75)(XA / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(477.400/(295.472 *0.354 )^0.5), 0.1]
= 0.100

= max[(1 - 0.75)(XB / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(475.400/(295.472 *0.354 )^0.5), 0.1]
= 0.100

= max[(1 - 0.75)(XC / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(476.400/(295.472 *0.354 )^0.5), 0.1]
= 0.100

= lamda / (2 * YF * FP)
= 0.098/(2 * 4.000 * 0.665 )
= 0.18358E-01 1/lbf. [0.41273E+01 1/kN]

= lamda / (a / 12.0 * YL * FP)
= 0.098/(1.000/12.0 * 18.000 * 0.665 )
= 0.97910E-01 1/ft.lb. [0.72218E-01 1/N.m.]

= lamda / (a * 12.0 * YC * FP)
= 0.098/(1.000 * 12.0 * 117.000 * 0.665 )
= 0.15063E-01 1/ft.lb. [0.11110E-01 1/N.m.]

= 0.100/0.184E-01
= 0.54472E+01 lbf. [0.24229E-01 kN]
= 0.100/0.979E-01
= 0.10213E+01 ft.lb. [0.13847E+01 N.m.]
= -0.100/0.979E-01
= -.10213E+01 ft.lb. [-0.13847E+01 N.m.]

= 0.100/0.151E-01
= 0.66387E+01 ft.lb. [0.90005E+01 N.m.]

= 1.285 / (Rt)^0.5
= 1.285/(295.472 * 0.472 )^0.5
= 0.10876E+00 1/in. [0.42819E-02 1/mm.]

= (0.036*G*H*R^2)/Et
= (0.036*0.997 *482.283 *295.472^2)/29297606 *0.472
* [1-(e^-(0.109 *476.400 )) * cos(0.109 *476.400 ) - (476.400/482.28 )]
+ 0.667E+01 * 295.472 * 0.000
= 0.00133 in. [0.03383 mm.]

= (0.036*G*H*R^2)/E*t
= (0.036*0.997 *482.283 *295.472^2)/29297606 *0.472
* [(1/482.283 )-(0.109 *e^-(0.109 *476.400 ))
* [cos(0.109 *476.400 )+sin(0.109 *476.400 )]]
= 0.12971E-01 deg

= a/(Rt)^0.5
= 1.000/(295.472 * 0.472 )^0.5
= 0.085

= L + a
= 476.400 + 1.000
= 477.400 in. [12125.960 mm.]

= L - a
= 476.400 - 1.000
= 475.400 in. [12075.159 mm.]

= L
= 476.400 in. [12100.560 mm.]

YF = 4.000
YL = 18.000

YC = 117.000

= pi * a^2 * P
= 3.1415 * 1.000^2 * 0.212
= 0.665 lbf. [0.003 kN]

= max[(1 - 0.75)(XA / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(477.400/(295.472 *0.472 )^0.5), 0.1]
= 0.100

= max[(1 - 0.75)(XB / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(475.400/(295.472 *0.472 )^0.5), 0.1]

= 0.100

= max[(1 - 0.75)(XC / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(476.400/(295.472 *0.472 )^0.5), 0.1]
= 0.100

= lamda / (2 * YF * FP)
= 0.085/(2 * 4.000 * 0.665 )
= 0.15899E-01 1/lbf. [0.35743E+01 1/kN]

= lamda / (a / 12.0 * YL * FP)
= 0.085/(1.000/12.0 * 18.000 * 0.665 )
= 0.84793E-01 1/ft.lb. [0.62543E-01 1/N.m.]

= lamda / (a * 12.0 * YC * FP)
= 0.085/(1.000 * 12.0 * 117.000 * 0.665 )
= 0.13045E-01 1/ft.lb. [0.96219E-02 1/N.m.]

= 0.100/0.159E-01
= 0.62899E+01 lbf. [0.27977E-01 kN]
= 0.100/0.848E-01
= 0.11793E+01 ft.lb. [0.15989E+01 N.m.]
= -0.100/0.848E-01
= -.11793E+01 ft.lb. [-0.15989E+01 N.m.]

= 0.100/0.130E-01
= 0.76658E+01 ft.lb. [0.10393E+02 N.m.]

= 1.285 / (Rt)^0.5
= 1.285/(295.472 * 0.472 )^0.5
= 0.10876E+00 1/in. [0.42819E-02 1/mm.]

= (0.036*G*H*R^2)/Et
= (0.036*0.997 *482.283 *295.472^2)/29297606 *0.472
* [1-(e^-(0.109 *476.400 )) * cos(0.109 *476.400 ) - (476.400/482.28 )]
+ 0.667E+01 * 295.472 * 0.000
= 0.00133 in. [0.03383 mm.]

= (0.036*G*H*R^2)/E*t
= (0.036*0.997 *482.283 *295.472^2)/29297606 *0.472
* [(1/482.283 )-(0.109 *e^-(0.109 *476.400 ))
* [cos(0.109 *476.400 )+sin(0.109 *476.400 )]]
= 0.12971E-01 deg

= a/(Rt)^0.5
= 1.000/(295.472 * 0.472 )^0.5

= 0.085

= L + a
= 476.400 + 1.000
= 477.400 in. [12125.960 mm.]

= L - a
= 476.400 - 1.000
= 475.400 in. [12075.159 mm.]

= L
= 476.400 in. [12100.560 mm.]

YF = 4.000
YL = 18.000

YC = 117.000

= pi * a^2 * P
= 3.1415 * 1.000^2 * 0.212
= 0.665 lbf. [0.003 kN]

= max[(1 - 0.75)(XA / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(477.400/(295.472 *0.472 )^0.5), 0.1]
= 0.100

= max[(1 - 0.75)(XB / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(475.400/(295.472 *0.472 )^0.5), 0.1]
= 0.100

= max[(1 - 0.75)(XC / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(476.400/(295.472 *0.472 )^0.5), 0.1]
= 0.100

= lamda / (2 * YF * FP)
= 0.085/(2 * 4.000 * 0.665 )
= 0.15899E-01 1/lbf. [0.35743E+01 1/kN]

= lamda / (a / 12.0 * YL * FP)
= 0.085/(1.000/12.0 * 18.000 * 0.665 )
= 0.84793E-01 1/ft.lb. [0.62543E-01 1/N.m.]

= lamda / (a * 12.0 * YC * FP)
= 0.085/(1.000 * 12.0 * 117.000 * 0.665 )
= 0.13045E-01 1/ft.lb. [0.96219E-02 1/N.m.]

= 0.100/0.159E-01
= 0.62899E+01 lbf. [0.27977E-01 kN]
= 0.100/0.848E-01
= 0.11793E+01 ft.lb. [0.15989E+01 N.m.]

= -0.100/0.848E-01
= -.11793E+01 ft.lb. [-0.15989E+01 N.m.]

= 0.100/0.130E-01
= 0.76658E+01 ft.lb. [0.10393E+02 N.m.]

= 1.285 / (Rt)^0.5
= 1.285/(295.472 * 0.591 )^0.5
= 0.97278E-01 1/in. [0.38299E-02 1/mm.]

= (0.036*G*H*R^2)/Et
= (0.036*0.997 *482.283 *295.472^2)/29297606 *0.591
* [1-(e^-(0.097 *476.400 )) * cos(0.097 *476.400 ) - (476.400/482.28 )]
+ 0.667E+01 * 295.472 * 0.000
= 0.00107 in. [0.02707 mm.]

= (0.036*G*H*R^2)/E*t
= (0.036*0.997 *482.283 *295.472^2)/29297606 *0.591
* [(1/482.283 )-(0.097 *e^-(0.097 *476.400 ))
* [cos(0.097 *476.400 )+sin(0.097 *476.400 )]]
= 0.10377E-01 deg

= a/(Rt)^0.5
= 1.250/(295.472 * 0.591 )^0.5
= 0.095

= L + a
= 476.400 + 1.250
= 477.650 in. [12132.310 mm.]

= L - a
= 476.400 - 1.250
= 475.150 in. [12068.810 mm.]

= L
= 476.400 in. [12100.560 mm.]

YF = 4.000
YL = 18.000

YC = 117.000

= pi * a^2 * P
= 3.1415 * 1.250^2 * 0.212
= 1.040 lbf. [0.005 kN]

= max[(1 - 0.75)(XA / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(477.650/(295.472 *0.591 )^0.5), 0.1]
= 0.100

= max[(1 - 0.75)(XB / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(475.150/(295.472 *0.591 )^0.5), 0.1]
= 0.100

= max[(1 - 0.75)(XC / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(476.400/(295.472 *0.591 )^0.5), 0.1]
= 0.100

= lamda / (2 * YF * FP)
= 0.095/(2 * 4.000 * 1.040 )
= 0.11376E-01 1/lbf. [0.25576E+01 1/kN]

= lamda / (a / 12.0 * YL * FP)
= 0.095/(1.250/12.0 * 18.000 * 1.040 )
= 0.48538E-01 1/ft.lb. [0.35801E-01 1/N.m.]

= lamda / (a * 12.0 * YC * FP)
= 0.095/(1.250 * 12.0 * 117.000 * 1.040 )
= 0.74674E-02 1/ft.lb. [0.55079E-02 1/N.m.]

= 0.100/0.114E-01
= 0.87903E+01 lbf. [0.39099E-01 kN]
= 0.100/0.485E-01
= 0.20602E+01 ft.lb. [0.27932E+01 N.m.]
= -0.100/0.485E-01
= -.20602E+01 ft.lb. [-0.27932E+01 N.m.]

= 0.100/0.747E-02
= 0.13392E+02 ft.lb. [0.18156E+02 N.m.]

= 1.285 / (Rt)^0.5
= 1.285/(295.472 * 0.709 )^0.5
= 0.88803E-01 1/in. [0.34962E-02 1/mm.]

= (0.036*G*H*R^2)/Et
= (0.036*0.997 *482.283 *295.472^2)/29297606 *0.709
* [1-(e^-(0.089 *476.400 )) * cos(0.089 *476.400 ) - (476.400/482.28 )]
+ 0.667E+01 * 295.472 * 0.000
= 0.00089 in. [0.02255 mm.]

= (0.036*G*H*R^2)/E*t
= (0.036*0.997 *482.283 *295.472^2)/29297606 *0.709
* [(1/482.283 )-(0.089 *e^-(0.089 *476.400 ))
* [cos(0.089 *476.400 )+sin(0.089 *476.400 )]]
= 0.86474E-02 deg

= a/(Rt)^0.5
= 1.250/(295.472 * 0.709 )^0.5
= 0.086

= L + a
= 476.400 + 1.250
= 477.650 in. [12132.310 mm.]

= L - a
= 476.400 - 1.250
= 475.150 in. [12068.810 mm.]

= L
= 476.400 in. [12100.560 mm.]

YF = 4.000
YL = 18.000

YC = 117.000

= pi * a^2 * P
= 3.1415 * 1.250^2 * 0.212
= 1.040 lbf. [0.005 kN]

= max[(1 - 0.75)(XA / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(477.650/(295.472 *0.709 )^0.5), 0.1]
= 0.100

= max[(1 - 0.75)(XB / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(475.150/(295.472 *0.709 )^0.5), 0.1]
= 0.100

= max[(1 - 0.75)(XC / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(476.400/(295.472 *0.709 )^0.5), 0.1]
= 0.100

= lamda / (2 * YF * FP)
= 0.086/(2 * 4.000 * 1.040 )
= 0.10385E-01 1/lbf. [0.23347E+01 1/kN]

= lamda / (a / 12.0 * YL * FP)
= 0.086/(1.250/12.0 * 18.000 * 1.040 )
= 0.44309E-01 1/ft.lb. [0.32682E-01 1/N.m.]

= lamda / (a * 12.0 * YC * FP)
= 0.086/(1.250 * 12.0 * 117.000 * 1.040 )
= 0.68168E-02 1/ft.lb. [0.50280E-02 1/N.m.]

= 0.100/0.104E-01
= 0.96293E+01 lbf. [0.42831E-01 kN]
= 0.100/0.443E-01
= 0.22569E+01 ft.lb. [0.30598E+01 N.m.]
= -0.100/0.443E-01
= -.22569E+01 ft.lb. [-0.30598E+01 N.m.]

= 0.100/0.682E-02
= 0.14670E+02 ft.lb. [0.19889E+02 N.m.]

= 1.285 / (Rt)^0.5
= 1.285/(295.472 * 0.709 )^0.5
= 0.88803E-01 1/in. [0.34962E-02 1/mm.]

= (0.036*G*H*R^2)/Et
= (0.036*0.997 *482.283 *295.472^2)/29297606 *0.709
* [1-(e^-(0.089 *476.400 )) * cos(0.089 *476.400 ) - (476.400/482.28 )]
+ 0.667E+01 * 295.472 * 0.000
= 0.00089 in. [0.02255 mm.]

= (0.036*G*H*R^2)/E*t
= (0.036*0.997 *482.283 *295.472^2)/29297606 *0.709
* [(1/482.283 )-(0.089 *e^-(0.089 *476.400 ))
* [cos(0.089 *476.400 )+sin(0.089 *476.400 )]]
= 0.86474E-02 deg

= a/(Rt)^0.5
= 1.250/(295.472 * 0.709 )^0.5
= 0.086

= L + a
= 476.400 + 1.250
= 477.650 in. [12132.310 mm.]

= L - a
= 476.400 - 1.250
= 475.150 in. [12068.810 mm.]

= L
= 476.400 in. [12100.560 mm.]

YF = 4.000
YL = 18.000

YC = 117.000

= pi * a^2 * P
= 3.1415 * 1.250^2 * 0.212
= 1.040 lbf. [0.005 kN]

= max[(1 - 0.75)(XA / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(477.650/(295.472 *0.709 )^0.5), 0.1]
= 0.100

= max[(1 - 0.75)(XB / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(475.150/(295.472 *0.709 )^0.5), 0.1]
= 0.100

= max[(1 - 0.75)(XC / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(476.400/(295.472 *0.709 )^0.5), 0.1]
= 0.100

= lamda / (2 * YF * FP)
= 0.086/(2 * 4.000 * 1.040 )
= 0.10385E-01 1/lbf. [0.23347E+01 1/kN]

= lamda / (a / 12.0 * YL * FP)
= 0.086/(1.250/12.0 * 18.000 * 1.040 )
= 0.44309E-01 1/ft.lb. [0.32682E-01 1/N.m.]

= lamda / (a * 12.0 * YC * FP)
= 0.086/(1.250 * 12.0 * 117.000 * 1.040 )
= 0.68168E-02 1/ft.lb. [0.50280E-02 1/N.m.]

= 0.100/0.104E-01
= 0.96293E+01 lbf. [0.42831E-01 kN]
= 0.100/0.443E-01
= 0.22569E+01 ft.lb. [0.30598E+01 N.m.]
= -0.100/0.443E-01
= -.22569E+01 ft.lb. [-0.30598E+01 N.m.]

= 0.100/0.682E-02
= 0.14670E+02 ft.lb. [0.19889E+02 N.m.]
Design Case [Nozzle 4 ] per Appendix P:
Nozzle stiffness coefficients per P.2.4:
Outside radius of nozzle [a]:

= D / 2
= 8.0/2
= 4.0 in. [203.2 mm.]
Nominal tank radius [R]:

= Nominal tank diameter / 2
= 590.9/2
= 295.5 in. [15010.0 mm.]
L / 2a coefficient:
= L / 2 * a
= 476.400/2 * 4.000
= 59.5
As L/2a >= 1.5, use second set of curves.
a / R coefficient:
= a / R
= 4.0/295.472
= 0.014
R / t coefficient:
= R / t
= 295.472/0.591
= 500.3
From figure P-2D [KR/E(2a)]:

= 0.422E-03
From figure P-2E [KL/E(2a)^3]:

= 0.758E-03
From figure P-2F [KC/E(2a)^3]:

= 0.500E-03
Stiffness coefficient for the radial thrust load per P.2.9.2.1 [KR]:
= Coeff. from graph * E * 2 * a
= 0.422E-03 * 29297606 * 2 * 4.000
= 0.98945E+05 lbf./in. [0.17315E+02 kN./mm.]
Stiffness coefficient for the longitudinal moment per P.2.9.2.1 [KL]:

= Coeff. from graph * E * ( 2.0 * a )^3
= 0.758E-03 * 29297606 * ( 2.0 * 4.000 )^3
= 0.19850E+06 in.lbf./deg [0.22426E+05 N.m./deg]
Stiffness coefficient for the circumferential moment per P.2.9.2.1 [KC]:

= Coeff. from graph * E * ( 2 * a )^3
= 0.500E-03 * 29297606 * ( 2 * 4.000 )^3

= 1.285 / (Rt)^0.5
= 1.285/(295.472 * 0.591 )^0.5
= 0.97278E-01 1/in. [0.38299E-02 1/mm.]

= (0.036*G*H*R^2)/Et
= (0.036*0.997 *482.283 *295.472^2)/29297606 *0.591
* [1-(e^-(0.097 *476.400 )) * cos(0.097 *476.400 ) - (476.400/482.28 )]
+ 0.667E+01 * 295.472 * 0.000
= 0.00107 in. [0.02707 mm.]

= (0.036*G*H*R^2)/E*t
= (0.036*0.997 *482.283 *295.472^2)/29297606 *0.591
* [(1/482.283 )-(0.097 *e^-(0.097 *476.400 ))
* [cos(0.097 *476.400 )+sin(0.097 *476.400 )]]
= 0.10377E-01 deg

= a/(Rt)^0.5
= 4.000/(295.472 * 0.591 )^0.5
= 0.303

= L + a
= 476.400 + 4.000
= 480.400 in. [12202.159 mm.]

= L - a
= 476.400 - 4.000
= 472.400 in. [11998.960 mm.]

= L
= 476.400 in. [12100.560 mm.]

YF = 1.489
YL = 5.926

YC = 11.746

= pi * a^2 * P
= 3.1415 * 4.000^2 * 0.212
= 10.647 lbf. [0.047 kN]

= max[(1 - 0.75)(XA / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(480.400/(295.472 *0.591 )^0.5), 0.1]
= 0.100

= max[(1 - 0.75)(XB / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(472.400/(295.472 *0.591 )^0.5), 0.1]
= 0.100

= max[(1 - 0.75)(XC / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(476.400/(295.472 *0.591 )^0.5), 0.1]
= 0.100

= lamda / (2 * YF * FP)
= 0.303/(2 * 1.489 * 10.647 )
= 0.95490E-02 1/lbf. [0.21468E+01 1/kN]

= lamda / (a / 12.0 * YL * FP)
= 0.303/(4.000/12.0 * 5.926 * 10.647 )
= 0.14397E-01 1/ft.lb. [0.10619E-01 1/N.m.]

= lamda / (a * 12.0 * YC * FP)
= 0.303/(4.000 * 12.0 * 11.746 * 10.647 )
= 0.72640E-02 1/ft.lb. [0.53579E-02 1/N.m.]

= 0.100/0.955E-02
= 0.10472E+02 lbf. [0.46581E-01 kN]
= 0.100/0.144E-01
= 0.69460E+01 ft.lb. [0.94171E+01 N.m.]
= -0.100/0.144E-01
= -.69460E+01 ft.lb. [-0.94171E+01 N.m.]

= 0.100/0.726E-02
= 0.13767E+02 ft.lb. [0.18664E+02 N.m.]
Test Case [Nozzle 4 ] per Appendix P:


= D / 2
= 8.0/2
= 4.0 in. [203.2 mm.]

= 590.9/2
= 295.5 in. [15010.0 mm.]
L / 2a coefficient:
= L / 2 * a
= 476.400/2 * 4.000
= 59.5
a / R coefficient:
= a / R
= 4.0/295.472
= 0.014
R / t coefficient:
= R / t
= 295.472/0.709
= 416.9

= 0.612E-03

= 0.111E-02

= 0.724E-03
= 0.612E-03 * 29297606 * 2 * 4.000
= 0.14344E+06 lbf./in. [0.25101E+02 kN./mm.]

= 0.111E-02 * 29297606 * ( 2.0 * 4.000 )^3

= 0.724E-03 * 29297606 * ( 2 * 4.000 )^3

= 1.285 / (Rt)^0.5
= 1.285/(295.472 * 0.709 )^0.5
= 0.88803E-01 1/in. [0.34962E-02 1/mm.]

= (0.036*G*H*R^2)/Et
= (0.036*0.997 *482.283 *295.472^2)/29297606 *0.709
* [1-(e^-(0.089 *476.400 )) * cos(0.089 *476.400 ) - (476.400/482.28 )]
+ 0.667E+01 * 295.472 * 0.000
= 0.00089 in. [0.02255 mm.]

= (0.036*G*H*R^2)/E*t
= (0.036*0.997 *482.283 *295.472^2)/29297606 *0.709
* [(1/482.283 )-(0.089 *e^-(0.089 *476.400 ))

* [cos(0.089 *476.400 )+sin(0.089 *476.400 )]]
= 0.86474E-02 deg

= a/(Rt)^0.5
= 4.000/(295.472 * 0.709 )^0.5
= 0.276

= L + a
= 476.400 + 4.000
= 480.400 in. [12202.159 mm.]

= L - a
= 476.400 - 4.000
= 472.400 in. [11998.960 mm.]

= L
= 476.400 in. [12100.560 mm.]

YF = 1.649
YL = 6.717

YC = 14.238

= pi * a^2 * P
= 3.1415 * 4.000^2 * 0.212
= 10.647 lbf. [0.047 kN]

= max[(1 - 0.75)(XA / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(480.400/(295.472 *0.709 )^0.5), 0.1]
= 0.100

= max[(1 - 0.75)(XB / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(472.400/(295.472 *0.709 )^0.5), 0.1]
= 0.100

= max[(1 - 0.75)(XC / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(476.400/(295.472 *0.709 )^0.5), 0.1]
= 0.100

= lamda / (2 * YF * FP)
= 0.276/(2 * 1.649 * 10.647 )
= 0.78709E-02 1/lbf. [0.17695E+01 1/kN]

= lamda / (a / 12.0 * YL * FP)
= 0.276/(4.000/12.0 * 6.717 * 10.647 )
= 0.11595E-01 1/ft.lb. [0.85523E-02 1/N.m.]

= lamda / (a * 12.0 * YC * FP)
= 0.276/(4.000 * 12.0 * 14.238 * 10.647 )
= 0.54704E-02 1/ft.lb. [0.40349E-02 1/N.m.]

= 0.100/0.787E-02
= 0.12705E+02 lbf. [0.56512E-01 kN]
= 0.100/0.116E-01
= 0.86246E+01 ft.lb. [0.11693E+02 N.m.]
= -0.100/0.116E-01
= -.86246E+01 ft.lb. [-0.11693E+02 N.m.]

= 0.100/0.547E-02
= 0.18280E+02 ft.lb. [0.24784E+02 N.m.]
User Case [Nozzle 4 ] per Appendix P:

= D / 2
= 8.0/2
= 4.0 in. [203.2 mm.]

= 590.9/2
= 295.5 in. [15010.0 mm.]
L / 2a coefficient:
= L / 2 * a
= 476.400/2 * 4.000
= 59.5
a / R coefficient:
= a / R
= 4.0/295.472
= 0.014
R / t coefficient:
= R / t
= 295.472/0.709
= 416.9

= 0.612E-03

= 0.111E-02

= 0.724E-03
= 0.612E-03 * 29297606 * 2 * 4.000
= 0.14344E+06 lbf./in. [0.25101E+02 kN./mm.]

= 0.111E-02 * 29297606 * ( 2.0 * 4.000 )^3

= 0.724E-03 * 29297606 * ( 2 * 4.000 )^3

= 1.285 / (Rt)^0.5
= 1.285/(295.472 * 0.709 )^0.5
= 0.88803E-01 1/in. [0.34962E-02 1/mm.]

= (0.036*G*H*R^2)/Et
= (0.036*0.997 *482.283 *295.472^2)/29297606 *0.709
* [1-(e^-(0.089 *476.400 )) * cos(0.089 *476.400 ) - (476.400/482.28 )]
+ 0.667E+01 * 295.472 * 0.000
= 0.00089 in. [0.02255 mm.]

= (0.036*G*H*R^2)/E*t
= (0.036*0.997 *482.283 *295.472^2)/29297606 *0.709
* [(1/482.283 )-(0.089 *e^-(0.089 *476.400 ))
* [cos(0.089 *476.400 )+sin(0.089 *476.400 )]]
= 0.86474E-02 deg

= a/(Rt)^0.5
= 4.000/(295.472 * 0.709 )^0.5
= 0.276

= L + a
= 476.400 + 4.000
= 480.400 in. [12202.159 mm.]

= L - a
= 476.400 - 4.000
= 472.400 in. [11998.960 mm.]

= L
= 476.400 in. [12100.560 mm.]

YF = 1.649
YL = 6.717

YC = 14.238

= pi * a^2 * P
= 3.1415 * 4.000^2 * 0.212
= 10.647 lbf. [0.047 kN]

= max[(1 - 0.75)(XA / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(480.400/(295.472 *0.709 )^0.5), 0.1]
= 0.100

= max[(1 - 0.75)(XB / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(472.400/(295.472 *0.709 )^0.5), 0.1]
= 0.100

= max[(1 - 0.75)(XC / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(476.400/(295.472 *0.709 )^0.5), 0.1]
= 0.100

= lamda / (2 * YF * FP)
= 0.276/(2 * 1.649 * 10.647 )
= 0.78709E-02 1/lbf. [0.17695E+01 1/kN]

= lamda / (a / 12.0 * YL * FP)
= 0.276/(4.000/12.0 * 6.717 * 10.647 )
= 0.11595E-01 1/ft.lb. [0.85523E-02 1/N.m.]

= lamda / (a * 12.0 * YC * FP)
= 0.276/(4.000 * 12.0 * 14.238 * 10.647 )
= 0.54704E-02 1/ft.lb. [0.40349E-02 1/N.m.]

= 0.100/0.787E-02
= 0.12705E+02 lbf. [0.56512E-01 kN]
= 0.100/0.116E-01
= 0.86246E+01 ft.lb. [0.11693E+02 N.m.]
= -0.100/0.116E-01
= -.86246E+01 ft.lb. [-0.11693E+02 N.m.]

= 0.100/0.547E-02
= 0.18280E+02 ft.lb. [0.24784E+02 N.m.]

= 1.285 / (Rt)^0.5
= 1.285/(295.472 * 0.669 )^0.5
= 0.91377E-01 1/in. [0.35975E-02 1/mm.]

= (0.036*G*H*R^2)/Et
= (0.036*0.997 *482.283 *295.472^2)/29297606 *0.669
* [1-(e^-(0.091 *196.800 )) * cos(0.091 *196.800 ) - (196.800/482.28 )]
+ 0.667E+01 * 295.472 * 0.000
= 0.04562 in. [1.15877 mm.]

= (0.036*G*H*R^2)/E*t
= (0.036*0.997 *482.283 *295.472^2)/29297606 *0.669
* [(1/482.283 )-(0.091 *e^-(0.091 *196.800 ))
* [cos(0.091 *196.800 )+sin(0.091 *196.800 )]]
= 0.91560E-02 deg

= a/(Rt)^0.5
= 4.000/(295.472 * 0.669 )^0.5
= 0.284

= L + a
= 196.800 + 4.000
= 200.800 in. [5100.320 mm.]

= L - a
= 196.800 - 4.000
= 192.800 in. [4897.120 mm.]

= L
= 196.800 in. [4998.720 mm.]

YF = 1.596
YL = 6.458

YC = 13.413

= pi * a^2 * P
= 3.1415 * 4.000^2 * 10.278
= 516.639 lbf. [2.298 kN]

= max[(1 - 0.75)(XA / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(200.800/(295.472 *0.669 )^0.5), 0.1]
= 0.100

= max[(1 - 0.75)(XB / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(192.800/(295.472 *0.669 )^0.5), 0.1]
= 0.100

= max[(1 - 0.75)(XC / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(196.800/(295.472 *0.669 )^0.5), 0.1]
= 0.100

= lamda / (2 * YF * FP)
= 0.284/(2 * 1.596 * 516.639 )
= 0.17253E-03 1/lbf. [0.38789E-01 1/kN]

= lamda / (a / 12.0 * YL * FP)
= 0.284/(4.000/12.0 * 6.458 * 516.639 )
= 0.25577E-03 1/ft.lb. [0.18866E-03 1/N.m.]

= lamda / (a * 12.0 * YC * FP)
= 0.284/(4.000 * 12.0 * 13.413 * 516.639 )
= 0.12315E-03 1/ft.lb. [0.90831E-04 1/N.m.]

= 0.100/0.173E-03
= 0.57959E+03 lbf. [0.25780E+01 kN]
= 0.100/0.256E-03
= 0.39097E+03 ft.lb. [0.53006E+03 N.m.]
= -0.100/0.256E-03
= -.39097E+03 ft.lb. [-0.53006E+03 N.m.]

= 0.100/0.123E-03
= 0.81205E+03 ft.lb. [0.11009E+04 N.m.]

= 1.285 / (Rt)^0.5
= 1.285/(295.472 * 0.787 )^0.5
= 0.84245E-01 1/in. [0.33168E-02 1/mm.]

= (0.036*G*H*R^2)/Et
= (0.036*0.997 *482.283 *295.472^2)/29297606 *0.787
* [1-(e^-(0.084 *196.800 )) * cos(0.084 *196.800 ) - (196.800/482.28 )]
+ 0.667E+01 * 295.472 * 0.000
= 0.03878 in. [0.98496 mm.]

= (0.036*G*H*R^2)/E*t
= (0.036*0.997 *482.283 *295.472^2)/29297606 *0.787
* [(1/482.283 )-(0.084 *e^-(0.084 *196.800 ))
* [cos(0.084 *196.800 )+sin(0.084 *196.800 )]]
= 0.77826E-02 deg

= a/(Rt)^0.5
= 4.000/(295.472 * 0.787 )^0.5
= 0.262

= L + a
= 196.800 + 4.000
= 200.800 in. [5100.320 mm.]

= L - a
= 196.800 - 4.000
= 192.800 in. [4897.120 mm.]

= L
= 196.800 in. [4998.720 mm.]

YF = 1.753
YL = 7.224

YC = 15.895

= pi * a^2 * P
= 3.1415 * 4.000^2 * 10.278
= 516.639 lbf. [2.298 kN]

= max[(1 - 0.75)(XA / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(200.800/(295.472 *0.787 )^0.5), 0.1]
= 0.100

= max[(1 - 0.75)(XB / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(192.800/(295.472 *0.787 )^0.5), 0.1]
= 0.100

= max[(1 - 0.75)(XC / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(196.800/(295.472 *0.787 )^0.5), 0.1]
= 0.100

= lamda / (2 * YF * FP)
= 0.262/(2 * 1.753 * 516.639 )
= 0.14477E-03 1/lbf. [0.32547E-01 1/kN]

= lamda / (a / 12.0 * YL * FP)
= 0.262/(4.000/12.0 * 7.224 * 516.639 )
= 0.21079E-03 1/ft.lb. [0.15548E-03 1/N.m.]

= lamda / (a * 12.0 * YC * FP)
= 0.262/(4.000 * 12.0 * 15.895 * 516.639 )
= 0.95803E-04 1/ft.lb. [0.70664E-04 1/N.m.]

= 0.100/0.145E-03
= 0.69075E+03 lbf. [0.30725E+01 kN]
= 0.100/0.211E-03
= 0.47440E+03 ft.lb. [0.64317E+03 N.m.]
= -0.100/0.211E-03
= -.47440E+03 ft.lb. [-0.64317E+03 N.m.]

= 0.100/0.958E-04
= 0.10438E+04 ft.lb. [0.14151E+04 N.m.]

= 1.285 / (Rt)^0.5
= 1.285/(295.472 * 0.787 )^0.5
= 0.84245E-01 1/in. [0.33168E-02 1/mm.]

= (0.036*G*H*R^2)/Et
= (0.036*0.997 *482.283 *295.472^2)/29297606 *0.787
* [1-(e^-(0.084 *196.800 )) * cos(0.084 *196.800 ) - (196.800/482.28 )]
+ 0.667E+01 * 295.472 * 0.000
= 0.03878 in. [0.98496 mm.]

= (0.036*G*H*R^2)/E*t
= (0.036*0.997 *482.283 *295.472^2)/29297606 *0.787
* [(1/482.283 )-(0.084 *e^-(0.084 *196.800 ))
* [cos(0.084 *196.800 )+sin(0.084 *196.800 )]]
= 0.77826E-02 deg

= a/(Rt)^0.5
= 4.000/(295.472 * 0.787 )^0.5
= 0.262

= L + a
= 196.800 + 4.000
= 200.800 in. [5100.320 mm.]

= L - a
= 196.800 - 4.000
= 192.800 in. [4897.120 mm.]

= L
= 196.800 in. [4998.720 mm.]

YF = 1.753
YL = 7.224

YC = 15.895

= pi * a^2 * P
= 3.1415 * 4.000^2 * 10.278
= 516.639 lbf. [2.298 kN]

= max[(1 - 0.75)(XA / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(200.800/(295.472 *0.787 )^0.5), 0.1]
= 0.100

= max[(1 - 0.75)(XB / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(192.800/(295.472 *0.787 )^0.5), 0.1]
= 0.100

= max[(1 - 0.75)(XC / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(196.800/(295.472 *0.787 )^0.5), 0.1]
= 0.100

= lamda / (2 * YF * FP)
= 0.262/(2 * 1.753 * 516.639 )
= 0.14477E-03 1/lbf. [0.32547E-01 1/kN]

= lamda / (a / 12.0 * YL * FP)
= 0.262/(4.000/12.0 * 7.224 * 516.639 )
= 0.21079E-03 1/ft.lb. [0.15548E-03 1/N.m.]

= lamda / (a * 12.0 * YC * FP)
= 0.262/(4.000 * 12.0 * 15.895 * 516.639 )
= 0.95803E-04 1/ft.lb. [0.70664E-04 1/N.m.]

= 0.100/0.145E-03
= 0.69075E+03 lbf. [0.30725E+01 kN]
= 0.100/0.211E-03
= 0.47440E+03 ft.lb. [0.64317E+03 N.m.]
= -0.100/0.211E-03
= -.47440E+03 ft.lb. [-0.64317E+03 N.m.]

= 0.100/0.958E-04
= 0.10438E+04 ft.lb. [0.14151E+04 N.m.]

= 1.285 / (Rt)^0.5
= 1.285/(295.472 * 0.669 )^0.5
= 0.91377E-01 1/in. [0.35975E-02 1/mm.]

= (0.036*G*H*R^2)/Et
= (0.036*0.997 *482.283 *295.472^2)/29297606 *0.669
* [1-(e^-(0.091 *196.800 )) * cos(0.091 *196.800 ) - (196.800/482.28 )]
+ 0.667E+01 * 295.472 * 0.000
= 0.04562 in. [1.15877 mm.]

= (0.036*G*H*R^2)/E*t
= (0.036*0.997 *482.283 *295.472^2)/29297606 *0.669
* [(1/482.283 )-(0.091 *e^-(0.091 *196.800 ))
* [cos(0.091 *196.800 )+sin(0.091 *196.800 )]]
= 0.91560E-02 deg

= a/(Rt)^0.5
= 2.000/(295.472 * 0.669 )^0.5
= 0.142

= L + a
= 196.800 + 2.000
= 198.800 in. [5049.520 mm.]

= L - a
= 196.800 - 2.000
= 194.800 in. [4947.920 mm.]

= L
= 196.800 in. [4998.720 mm.]

YF = 3.086
YL = 13.688

YC = 56.574

= pi * a^2 * P
= 3.1415 * 2.000^2 * 10.278
= 129.160 lbf. [0.575 kN]

= max[(1 - 0.75)(XA / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(198.800/(295.472 *0.669 )^0.5), 0.1]
= 0.100

= max[(1 - 0.75)(XB / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(194.800/(295.472 *0.669 )^0.5), 0.1]
= 0.100

= max[(1 - 0.75)(XC / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(196.800/(295.472 *0.669 )^0.5), 0.1]

= 0.100

= lamda / (2 * YF * FP)
= 0.142/(2 * 3.086 * 129.160 )
= 0.17843E-03 1/lbf. [0.40115E-01 1/kN]

= lamda / (a / 12.0 * YL * FP)
= 0.142/(2.000/12.0 * 13.688 * 129.160 )
= 0.48268E-03 1/ft.lb. [0.35602E-03 1/N.m.]

= lamda / (a * 12.0 * YC * FP)
= 0.142/(2.000 * 12.0 * 56.574 * 129.160 )
= 0.11678E-03 1/ft.lb. [0.86136E-04 1/N.m.]

= 0.100/0.178E-03
= 0.56043E+03 lbf. [0.24928E+01 kN]
= 0.100/0.483E-03
= 0.20718E+03 ft.lb. [0.28088E+03 N.m.]
= -0.100/0.483E-03
= -.20718E+03 ft.lb. [-0.28088E+03 N.m.]

= 0.100/0.117E-03
= 0.85631E+03 ft.lb. [0.11610E+04 N.m.]

= 1.285 / (Rt)^0.5
= 1.285/(295.472 * 0.787 )^0.5
= 0.84245E-01 1/in. [0.33168E-02 1/mm.]

= (0.036*G*H*R^2)/Et
= (0.036*0.997 *482.283 *295.472^2)/29297606 *0.787
* [1-(e^-(0.084 *196.800 )) * cos(0.084 *196.800 ) - (196.800/482.28 )]
+ 0.667E+01 * 295.472 * 0.000
= 0.03878 in. [0.98496 mm.]

= (0.036*G*H*R^2)/E*t
= (0.036*0.997 *482.283 *295.472^2)/29297606 *0.787
* [(1/482.283 )-(0.084 *e^-(0.084 *196.800 ))
* [cos(0.084 *196.800 )+sin(0.084 *196.800 )]]
= 0.77826E-02 deg

= a/(Rt)^0.5
= 2.000/(295.472 * 0.787 )^0.5
= 0.131

= L + a
= 196.800 + 2.000
= 198.800 in. [5049.520 mm.]

= L - a
= 196.800 - 2.000
= 194.800 in. [4947.920 mm.]

= L
= 196.800 in. [4998.720 mm.]

YF = 3.276
YL = 14.580

YC = 66.900

= pi * a^2 * P
= 3.1415 * 2.000^2 * 10.278
= 129.160 lbf. [0.575 kN]

= max[(1 - 0.75)(XA / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(198.800/(295.472 *0.787 )^0.5), 0.1]
= 0.100

= max[(1 - 0.75)(XB / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(194.800/(295.472 *0.787 )^0.5), 0.1]
= 0.100

= max[(1 - 0.75)(XC / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(196.800/(295.472 *0.787 )^0.5), 0.1]
= 0.100

= lamda / (2 * YF * FP)
= 0.131/(2 * 3.276 * 129.160 )
= 0.15495E-03 1/lbf. [0.34835E-01 1/kN]

= lamda / (a / 12.0 * YL * FP)
= 0.131/(2.000/12.0 * 14.580 * 129.160 )
= 0.41776E-03 1/ft.lb. [0.30814E-03 1/N.m.]

= lamda / (a * 12.0 * YC * FP)
= 0.131/(2.000 * 12.0 * 66.900 * 129.160 )
= 0.91049E-04 1/ft.lb. [0.67157E-04 1/N.m.]

= 0.100/0.155E-03
= 0.64539E+03 lbf. [0.28707E+01 kN]
= 0.100/0.418E-03
= 0.23937E+03 ft.lb. [0.32453E+03 N.m.]
= -0.100/0.418E-03
= -.23937E+03 ft.lb. [-0.32453E+03 N.m.]


= 0.100/0.910E-04
= 0.10983E+04 ft.lb. [0.14891E+04 N.m.]

= 1.285 / (Rt)^0.5
= 1.285/(295.472 * 0.787 )^0.5
= 0.84245E-01 1/in. [0.33168E-02 1/mm.]

= (0.036*G*H*R^2)/Et
= (0.036*0.997 *482.283 *295.472^2)/29297606 *0.787
* [1-(e^-(0.084 *196.800 )) * cos(0.084 *196.800 ) - (196.800/482.28 )]
+ 0.667E+01 * 295.472 * 0.000
= 0.03878 in. [0.98496 mm.]

= (0.036*G*H*R^2)/E*t
= (0.036*0.997 *482.283 *295.472^2)/29297606 *0.787
* [(1/482.283 )-(0.084 *e^-(0.084 *196.800 ))
* [cos(0.084 *196.800 )+sin(0.084 *196.800 )]]
= 0.77826E-02 deg

= a/(Rt)^0.5
= 2.000/(295.472 * 0.787 )^0.5
= 0.131

= L + a
= 196.800 + 2.000
= 198.800 in. [5049.520 mm.]

= L - a
= 196.800 - 2.000
= 194.800 in. [4947.920 mm.]

= L
= 196.800 in. [4998.720 mm.]

YF = 3.276
YL = 14.580

YC = 66.900

= pi * a^2 * P
= 3.1415 * 2.000^2 * 10.278
= 129.160 lbf. [0.575 kN]

= max[(1 - 0.75)(XA / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(198.800/(295.472 *0.787 )^0.5), 0.1]
= 0.100

= max[(1 - 0.75)(XB / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(194.800/(295.472 *0.787 )^0.5), 0.1]
= 0.100

= max[(1 - 0.75)(XC / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(196.800/(295.472 *0.787 )^0.5), 0.1]
= 0.100

= lamda / (2 * YF * FP)
= 0.131/(2 * 3.276 * 129.160 )
= 0.15495E-03 1/lbf. [0.34835E-01 1/kN]

= lamda / (a / 12.0 * YL * FP)
= 0.131/(2.000/12.0 * 14.580 * 129.160 )
= 0.41776E-03 1/ft.lb. [0.30814E-03 1/N.m.]

= lamda / (a * 12.0 * YC * FP)
= 0.131/(2.000 * 12.0 * 66.900 * 129.160 )
= 0.91049E-04 1/ft.lb. [0.67157E-04 1/N.m.]

= 0.100/0.155E-03
= 0.64539E+03 lbf. [0.28707E+01 kN]
= 0.100/0.418E-03
= 0.23937E+03 ft.lb. [0.32453E+03 N.m.]
= -0.100/0.418E-03
= -.23937E+03 ft.lb. [-0.32453E+03 N.m.]

= 0.100/0.910E-04
= 0.10983E+04 ft.lb. [0.14891E+04 N.m.]

= 1.285 / (Rt)^0.5
= 1.285/(295.472 * 0.748 )^0.5
= 0.86434E-01 1/in. [0.34029E-02 1/mm.]

= (0.036*G*H*R^2)/Et
= (0.036*0.997 *482.283 *295.472^2)/29297606 *0.748
* [1-(e^-(0.086 *19.600 )) * cos(0.086 *19.600 ) - (19.600/482.28 )]
+ 0.667E+01 * 295.472 * 0.000
= 0.06771 in. [1.71993 mm.]

= (0.036*G*H*R^2)/E*t
= (0.036*0.997 *482.283 *295.472^2)/29297606 *0.748
* [(1/482.283 )-(0.086 *e^-(0.086 *19.600 ))
* [cos(0.086 *19.600 )+sin(0.086 *19.600 )]]
= -0.46367E-01 deg

= a/(Rt)^0.5
= 5.000/(295.472 * 0.748 )^0.5
= 0.336

= L + a
= 19.600 + 5.000
= 24.600 in. [624.840 mm.]

= L - a
= 19.600 - 5.000
= 14.600 in. [370.840 mm.]

= L
= 19.600 in. [497.840 mm.]

YF = 1.373
YL = 5.158

YC = 9.231

= pi * a^2 * P
= 3.1415 * 5.000^2 * 16.658
= 1308.307 lbf. [5.819 kN]

= max[(1 - 0.75)(XA / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(24.600/(295.472 *0.748 )^0.5), 0.1]
= 0.100

= max[(1 - 0.75)(XB / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(14.600/(295.472 *0.748 )^0.5), 0.1]
= 0.263

= max[(1 - 0.75)(XC / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(19.600/(295.472 *0.748 )^0.5), 0.1]
= 0.100

= lamda / (2 * YF * FP)
= 0.336/(2 * 1.373 * 1308.307 )
= 0.93630E-04 1/lbf. [0.21050E-01 1/kN]

= lamda / (a / 12.0 * YL * FP)
= 0.336/(5.000/12.0 * 5.158 * 1308.307 )
= 0.11962E-03 1/ft.lb. [0.88229E-04 1/N.m.]

= lamda / (a * 12.0 * YC * FP)
= 0.336/(5.000 * 12.0 * 9.231 * 1308.307 )
= 0.66834E-04 1/ft.lb. [0.49296E-04 1/N.m.]

= 0.100/0.936E-04
= 0.10680E+04 lbf. [0.47506E+01 kN]
= 0.263/0.120E-03
= 0.22025E+04 ft.lb. [0.29861E+04 N.m.]
= -0.100/0.120E-03
= -.83600E+03 ft.lb. [-0.11334E+04 N.m.]

= 0.100/0.668E-04
= 0.14963E+04 ft.lb. [0.20286E+04 N.m.]

= 1.285 / (Rt)^0.5
= 1.285/(295.472 * 0.866 )^0.5
= 0.80325E-01 1/in. [0.31624E-02 1/mm.]

= (0.036*G*H*R^2)/Et
= (0.036*0.997 *482.283 *295.472^2)/29297606 *0.866
* [1-(e^-(0.080 *19.600 )) * cos(0.080 *19.600 ) - (19.600/482.28 )]
+ 0.667E+01 * 295.472 * 0.000
= 0.05718 in. [1.45232 mm.]

= (0.036*G*H*R^2)/E*t
= (0.036*0.997 *482.283 *295.472^2)/29297606 *0.866
* [(1/482.283 )-(0.080 *e^-(0.080 *19.600 ))
* [cos(0.080 *19.600 )+sin(0.080 *19.600 )]]
= -0.49495E-01 deg

= a/(Rt)^0.5
= 5.000/(295.472 * 0.866 )^0.5
= 0.313

= L + a
= 19.600 + 5.000
= 24.600 in. [624.840 mm.]

= L - a
= 19.600 - 5.000
= 14.600 in. [370.840 mm.]

= L
= 19.600 in. [497.840 mm.]

YF = 1.453
YL = 5.683

YC = 10.923

= pi * a^2 * P
= 3.1415 * 5.000^2 * 16.658
= 1308.307 lbf. [5.819 kN]

= max[(1 - 0.75)(XA / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(24.600/(295.472 *0.866 )^0.5), 0.1]
= 0.100

= max[(1 - 0.75)(XB / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(14.600/(295.472 *0.866 )^0.5), 0.1]
= 0.316

= max[(1 - 0.75)(XC / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(19.600/(295.472 *0.866 )^0.5), 0.1]
= 0.100

= lamda / (2 * YF * FP)
= 0.313/(2 * 1.453 * 1308.307 )
= 0.82203E-04 1/lbf. [0.18481E-01 1/kN]

= lamda / (a / 12.0 * YL * FP)
= 0.313/(5.000/12.0 * 5.683 * 1308.307 )
= 0.10088E-03 1/ft.lb. [0.74411E-04 1/N.m.]

= lamda / (a * 12.0 * YC * FP)
= 0.313/(5.000 * 12.0 * 10.923 * 1308.307 )
= 0.52491E-04 1/ft.lb. [0.38717E-04 1/N.m.]

= 0.100/0.822E-04
= 0.12165E+04 lbf. [0.54110E+01 kN]
= 0.316/0.101E-03
= 0.31276E+04 ft.lb. [0.42402E+04 N.m.]
= -0.100/0.101E-03
= -.99124E+03 ft.lb. [-0.13439E+04 N.m.]

= 0.100/0.525E-04
= 0.19051E+04 ft.lb. [0.25828E+04 N.m.]

= 1.285 / (Rt)^0.5
= 1.285/(295.472 * 0.866 )^0.5
= 0.80325E-01 1/in. [0.31624E-02 1/mm.]

= (0.036*G*H*R^2)/Et
= (0.036*0.997 *482.283 *295.472^2)/29297606 *0.866
* [1-(e^-(0.080 *19.600 )) * cos(0.080 *19.600 ) - (19.600/482.28 )]
+ 0.667E+01 * 295.472 * 0.000
= 0.05718 in. [1.45232 mm.]

= (0.036*G*H*R^2)/E*t
= (0.036*0.997 *482.283 *295.472^2)/29297606 *0.866
* [(1/482.283 )-(0.080 *e^-(0.080 *19.600 ))
* [cos(0.080 *19.600 )+sin(0.080 *19.600 )]]
= -0.49495E-01 deg

= a/(Rt)^0.5
= 5.000/(295.472 * 0.866 )^0.5
= 0.313

= L + a
= 19.600 + 5.000
= 24.600 in. [624.840 mm.]

= L - a
= 19.600 - 5.000
= 14.600 in. [370.840 mm.]

= L
= 19.600 in. [497.840 mm.]

YF = 1.453
YL = 5.683

YC = 10.923

= pi * a^2 * P
= 3.1415 * 5.000^2 * 16.658
= 1308.307 lbf. [5.819 kN]

= max[(1 - 0.75)(XA / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(24.600/(295.472 *0.866 )^0.5), 0.1]
= 0.100

= max[(1 - 0.75)(XB / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(14.600/(295.472 *0.866 )^0.5), 0.1]
= 0.316

= max[(1 - 0.75)(XC / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(19.600/(295.472 *0.866 )^0.5), 0.1]
= 0.100

= lamda / (2 * YF * FP)
= 0.313/(2 * 1.453 * 1308.307 )
= 0.82203E-04 1/lbf. [0.18481E-01 1/kN]

= lamda / (a / 12.0 * YL * FP)
= 0.313/(5.000/12.0 * 5.683 * 1308.307 )
= 0.10088E-03 1/ft.lb. [0.74411E-04 1/N.m.]

= lamda / (a * 12.0 * YC * FP)
= 0.313/(5.000 * 12.0 * 10.923 * 1308.307 )
= 0.52491E-04 1/ft.lb. [0.38717E-04 1/N.m.]

= 0.100/0.822E-04
= 0.12165E+04 lbf. [0.54110E+01 kN]
= 0.316/0.101E-03
= 0.31276E+04 ft.lb. [0.42402E+04 N.m.]
= -0.100/0.101E-03
= -.99124E+03 ft.lb. [-0.13439E+04 N.m.]

= 0.100/0.525E-04
= 0.19051E+04 ft.lb. [0.25828E+04 N.m.]

= 1.285 / (Rt)^0.5
= 1.285/(295.472 * 0.591 )^0.5
= 0.97278E-01 1/in. [0.38299E-02 1/mm.]

= (0.036*G*H*R^2)/Et
= (0.036*0.997 *482.283 *295.472^2)/29297606 *0.591
* [1-(e^-(0.097 *476.377 )) * cos(0.097 *476.377 ) - (476.377/482.28 )]
+ 0.667E+01 * 295.472 * 0.000
= 0.00107 in. [0.02717 mm.]

= (0.036*G*H*R^2)/E*t
= (0.036*0.997 *482.283 *295.472^2)/29297606 *0.591
* [(1/482.283 )-(0.097 *e^-(0.097 *476.377 ))
* [cos(0.097 *476.377 )+sin(0.097 *476.377 )]]
= 0.10377E-01 deg

= a/(Rt)^0.5
= 3.000/(295.472 * 0.591 )^0.5
= 0.227

= L + a
= 476.377 + 3.000
= 479.377 in. [12176.176 mm.]

= L - a
= 476.377 - 3.000
= 473.377 in. [12023.776 mm.]

= L
= 476.377 in. [12099.976 mm.]

YF = 2.071
YL = 8.810

YC = 21.468

= pi * a^2 * P
= 3.1415 * 3.000^2 * 0.213
= 6.012 lbf. [0.027 kN]

= max[(1 - 0.75)(XA / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(479.377/(295.472 *0.591 )^0.5), 0.1]
= 0.100

= max[(1 - 0.75)(XB / (Rt)^0.5), 0.1]

= max[(1 - 0.75)(473.377/(295.472 *0.591 )^0.5), 0.1]
= 0.100

= max[(1 - 0.75)(XC / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(476.377/(295.472 *0.591 )^0.5), 0.1]
= 0.100

= lamda / (2 * YF * FP)
= 0.227/(2 * 2.071 * 6.012 )
= 0.91186E-02 1/lbf. [0.20501E+01 1/kN]

= lamda / (a / 12.0 * YL * FP)
= 0.227/(3.000/12.0 * 8.810 * 6.012 )
= 0.17149E-01 1/ft.lb. [0.12649E-01 1/N.m.]

= lamda / (a * 12.0 * YC * FP)
= 0.227/(3.000 * 12.0 * 21.468 * 6.012 )
= 0.70379E-02 1/ft.lb. [0.51911E-02 1/N.m.]

= 0.100/0.912E-02
= 0.10967E+02 lbf. [0.48779E-01 kN]
= 0.100/0.171E-01
= 0.58312E+01 ft.lb. [0.79057E+01 N.m.]
= -0.100/0.171E-01
= -.58312E+01 ft.lb. [-0.79057E+01 N.m.]

= 0.100/0.704E-02
= 0.14209E+02 ft.lb. [0.19264E+02 N.m.]

= 1.285 / (Rt)^0.5
= 1.285/(295.472 * 0.709 )^0.5
= 0.88803E-01 1/in. [0.34962E-02 1/mm.]

= (0.036*G*H*R^2)/Et
= (0.036*0.997 *482.283 *295.472^2)/29297606 *0.709
* [1-(e^-(0.089 *476.377 )) * cos(0.089 *476.377 ) - (476.377/482.28 )]
+ 0.667E+01 * 295.472 * 0.000
= 0.00089 in. [0.02264 mm.]

= (0.036*G*H*R^2)/E*t
= (0.036*0.997 *482.283 *295.472^2)/29297606 *0.709
* [(1/482.283 )-(0.089 *e^-(0.089 *476.377 ))
* [cos(0.089 *476.377 )+sin(0.089 *476.377 )]]
= 0.86474E-02 deg

= a/(Rt)^0.5
= 3.000/(295.472 * 0.709 )^0.5
= 0.207

= L + a
= 476.377 + 3.000
= 479.377 in. [12176.176 mm.]

= L - a
= 476.377 - 3.000
= 473.377 in. [12023.776 mm.]

= L
= 476.377 in. [12099.976 mm.]

YF = 2.302
YL = 9.992

YC = 25.974

= pi * a^2 * P
= 3.1415 * 3.000^2 * 0.213
= 6.012 lbf. [0.027 kN]

= max[(1 - 0.75)(XA / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(479.377/(295.472 *0.709 )^0.5), 0.1]
= 0.100

= max[(1 - 0.75)(XB / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(473.377/(295.472 *0.709 )^0.5), 0.1]
= 0.100

= max[(1 - 0.75)(XC / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(476.377/(295.472 *0.709 )^0.5), 0.1]
= 0.100

= lamda / (2 * YF * FP)
= 0.207/(2 * 2.302 * 6.012 )
= 0.74894E-02 1/lbf. [0.16838E+01 1/kN]

= lamda / (a / 12.0 * YL * FP)
= 0.207/(3.000/12.0 * 9.992 * 6.012 )
= 0.13804E-01 1/ft.lb. [0.10182E-01 1/N.m.]

= lamda / (a * 12.0 * YC * FP)
= 0.207/(3.000 * 12.0 * 25.974 * 6.012 )
= 0.53103E-02 1/ft.lb. [0.39168E-02 1/N.m.]

= 0.100/0.749E-02
= 0.13352E+02 lbf. [0.59391E-01 kN]
= 0.100/0.138E-01
= 0.72442E+01 ft.lb. [0.98214E+01 N.m.]
= -0.100/0.138E-01
= -.72442E+01 ft.lb. [-0.98214E+01 N.m.]

= 0.100/0.531E-02
= 0.18831E+02 ft.lb. [0.25531E+02 N.m.]

= 1.285 / (Rt)^0.5
= 1.285/(295.472 * 0.709 )^0.5
= 0.88803E-01 1/in. [0.34962E-02 1/mm.]

= (0.036*G*H*R^2)/Et
= (0.036*0.997 *482.283 *295.472^2)/29297606 *0.709
* [1-(e^-(0.089 *476.377 )) * cos(0.089 *476.377 ) - (476.377/482.28 )]
+ 0.667E+01 * 295.472 * 0.000
= 0.00089 in. [0.02264 mm.]

= (0.036*G*H*R^2)/E*t
= (0.036*0.997 *482.283 *295.472^2)/29297606 *0.709
* [(1/482.283 )-(0.089 *e^-(0.089 *476.377 ))
* [cos(0.089 *476.377 )+sin(0.089 *476.377 )]]
= 0.86474E-02 deg

= a/(Rt)^0.5
= 3.000/(295.472 * 0.709 )^0.5
= 0.207

= L + a
= 476.377 + 3.000
= 479.377 in. [12176.176 mm.]

= L - a
= 476.377 - 3.000
= 473.377 in. [12023.776 mm.]

= L
= 476.377 in. [12099.976 mm.]

YF = 2.302
YL = 9.992

YC = 25.974

= pi * a^2 * P
= 3.1415 * 3.000^2 * 0.213
= 6.012 lbf. [0.027 kN]

= max[(1 - 0.75)(XA / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(479.377/(295.472 *0.709 )^0.5), 0.1]
= 0.100

= max[(1 - 0.75)(XB / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(473.377/(295.472 *0.709 )^0.5), 0.1]
= 0.100

= max[(1 - 0.75)(XC / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(476.377/(295.472 *0.709 )^0.5), 0.1]
= 0.100

= lamda / (2 * YF * FP)
= 0.207/(2 * 2.302 * 6.012 )
= 0.74894E-02 1/lbf. [0.16838E+01 1/kN]

= lamda / (a / 12.0 * YL * FP)
= 0.207/(3.000/12.0 * 9.992 * 6.012 )
= 0.13804E-01 1/ft.lb. [0.10182E-01 1/N.m.]

= lamda / (a * 12.0 * YC * FP)
= 0.207/(3.000 * 12.0 * 25.974 * 6.012 )
= 0.53103E-02 1/ft.lb. [0.39168E-02 1/N.m.]

= 0.100/0.749E-02
= 0.13352E+02 lbf. [0.59391E-01 kN]
= 0.100/0.138E-01
= 0.72442E+01 ft.lb. [0.98214E+01 N.m.]
= -0.100/0.138E-01
= -.72442E+01 ft.lb. [-0.98214E+01 N.m.]

= 0.100/0.531E-02
= 0.18831E+02 ft.lb. [0.25531E+02 N.m.]

= 1.285 / (Rt)^0.5
= 1.285/(295.472 * 0.748 )^0.5
= 0.86434E-01 1/in. [0.34029E-02 1/mm.]

= (0.036*G*H*R^2)/Et
= (0.036*0.997 *482.283 *295.472^2)/29297606 *0.748
* [1-(e^-(0.086 *11.410 )) * cos(0.086 *11.410 ) - (11.410/482.28 )]
+ 0.667E+01 * 295.472 * 0.000
= 0.05313 in. [1.34956 mm.]

= (0.036*G*H*R^2)/E*t
= (0.036*0.997 *482.283 *295.472^2)/29297606 *0.748
* [(1/482.283 )-(0.086 *e^-(0.086 *11.410 ))
* [cos(0.086 *11.410 )+sin(0.086 *11.410 )]]
= -0.16832E+00 deg

= a/(Rt)^0.5
= 2.000/(295.472 * 0.748 )^0.5
= 0.135

= L + a
= 11.410 + 2.000
= 13.410 in. [340.614 mm.]

= L - a
= 11.410 - 2.000
= 9.410 in. [239.014 mm.]

= L
= 11.410 in. [289.814 mm.]

YF = 3.215
YL = 14.292

YC = 63.452

= pi * a^2 * P
= 3.1415 * 2.000^2 * 16.953
= 213.035 lbf. [0.948 kN]

= max[(1 - 0.75)(XA / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(13.410/(295.472 *0.748 )^0.5), 0.1]
= 0.323

= max[(1 - 0.75)(XB / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(9.410/(295.472 *0.748 )^0.5), 0.1]
= 0.525

= max[(1 - 0.75)(XC / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(11.410/(295.472 *0.748 )^0.5), 0.1]
= 0.424

= lamda / (2 * YF * FP)
= 0.135/(2 * 3.215 * 213.035 )
= 0.98220E-04 1/lbf. [0.22082E-01 1/kN]

= lamda / (a / 12.0 * YL * FP)
= 0.135/(2.000/12.0 * 14.292 * 213.035 )
= 0.26510E-03 1/ft.lb. [0.19553E-03 1/N.m.]

= lamda / (a * 12.0 * YC * FP)
= 0.135/(2.000 * 12.0 * 63.452 * 213.035 )
= 0.59713E-04 1/ft.lb. [0.44044E-04 1/N.m.]

= 0.323/0.982E-04
= 0.32936E+04 lbf. [0.14650E+02 kN]
= 0.525/0.265E-03
= 0.19815E+04 ft.lb. [0.26864E+04 N.m.]
= -0.323/0.265E-03
= -.12203E+04 ft.lb. [-0.16544E+04 N.m.]

= 0.424/0.597E-04
= 0.71072E+04 ft.lb. [0.96357E+04 N.m.]

= 1.285 / (Rt)^0.5
= 1.285/(295.472 * 0.866 )^0.5
= 0.80325E-01 1/in. [0.31624E-02 1/mm.]

= (0.036*G*H*R^2)/Et
= (0.036*0.997 *482.283 *295.472^2)/29297606 *0.866
* [1-(e^-(0.080 *11.410 )) * cos(0.080 *11.410 ) - (11.410/482.28 )]
+ 0.667E+01 * 295.472 * 0.000
= 0.04365 in. [1.10873 mm.]

= (0.036*G*H*R^2)/E*t
= (0.036*0.997 *482.283 *295.472^2)/29297606 *0.866
* [(1/482.283 )-(0.080 *e^-(0.080 *11.410 ))
* [cos(0.080 *11.410 )+sin(0.080 *11.410 )]]
= -0.14661E+00 deg

= a/(Rt)^0.5
= 2.000/(295.472 * 0.866 )^0.5
= 0.125

= L + a
= 11.410 + 2.000
= 13.410 in. [340.614 mm.]

= L - a
= 11.410 - 2.000
= 9.410 in. [239.014 mm.]

= L
= 11.410 in. [289.814 mm.]

YF = 3.393
YL = 15.131

YC = 73.811

= pi * a^2 * P
= 3.1415 * 2.000^2 * 16.953
= 213.035 lbf. [0.948 kN]

= max[(1 - 0.75)(XA / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(13.410/(295.472 *0.866 )^0.5), 0.1]

= 0.371

= max[(1 - 0.75)(XB / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(9.410/(295.472 *0.866 )^0.5), 0.1]
= 0.559

= max[(1 - 0.75)(XC / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(11.410/(295.472 *0.866 )^0.5), 0.1]
= 0.465

= lamda / (2 * YF * FP)
= 0.125/(2 * 3.393 * 213.035 )
= 0.86478E-04 1/lbf. [0.19442E-01 1/kN]

= lamda / (a / 12.0 * YL * FP)
= 0.125/(2.000/12.0 * 15.131 * 213.035 )
= 0.23271E-03 1/ft.lb. [0.17165E-03 1/N.m.]

= lamda / (a * 12.0 * YC * FP)
= 0.125/(2.000 * 12.0 * 73.811 * 213.035 )
= 0.47704E-04 1/ft.lb. [0.35186E-04 1/N.m.]

= 0.371/0.865E-04
= 0.42937E+04 lbf. [0.19098E+02 kN]
= 0.559/0.233E-03
= 0.24014E+04 ft.lb. [0.32558E+04 N.m.]
= -0.371/0.233E-03
= -.15956E+04 ft.lb. [-0.21632E+04 N.m.]

= 0.465/0.477E-04
= 0.97491E+04 ft.lb. [0.13217E+05 N.m.]

= 1.285 / (Rt)^0.5
= 1.285/(295.472 * 0.866 )^0.5
= 0.80325E-01 1/in. [0.31624E-02 1/mm.]

= (0.036*G*H*R^2)/Et
= (0.036*0.997 *482.283 *295.472^2)/29297606 *0.866
* [1-(e^-(0.080 *11.410 )) * cos(0.080 *11.410 ) - (11.410/482.28 )]
+ 0.667E+01 * 295.472 * 0.000
= 0.04365 in. [1.10873 mm.]

= (0.036*G*H*R^2)/E*t
= (0.036*0.997 *482.283 *295.472^2)/29297606 *0.866
* [(1/482.283 )-(0.080 *e^-(0.080 *11.410 ))
* [cos(0.080 *11.410 )+sin(0.080 *11.410 )]]

= -0.14661E+00 deg

= a/(Rt)^0.5
= 2.000/(295.472 * 0.866 )^0.5
= 0.125

= L + a
= 11.410 + 2.000
= 13.410 in. [340.614 mm.]

= L - a
= 11.410 - 2.000
= 9.410 in. [239.014 mm.]

= L
= 11.410 in. [289.814 mm.]

YF = 3.393
YL = 15.131

YC = 73.811

= pi * a^2 * P
= 3.1415 * 2.000^2 * 16.953
= 213.035 lbf. [0.948 kN]

= max[(1 - 0.75)(XA / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(13.410/(295.472 *0.866 )^0.5), 0.1]
= 0.371

= max[(1 - 0.75)(XB / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(9.410/(295.472 *0.866 )^0.5), 0.1]
= 0.559

= max[(1 - 0.75)(XC / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(11.410/(295.472 *0.866 )^0.5), 0.1]
= 0.465

= lamda / (2 * YF * FP)
= 0.125/(2 * 3.393 * 213.035 )
= 0.86478E-04 1/lbf. [0.19442E-01 1/kN]

= lamda / (a / 12.0 * YL * FP)
= 0.125/(2.000/12.0 * 15.131 * 213.035 )
= 0.23271E-03 1/ft.lb. [0.17165E-03 1/N.m.]

= lamda / (a * 12.0 * YC * FP)
= 0.125/(2.000 * 12.0 * 73.811 * 213.035 )
= 0.47704E-04 1/ft.lb. [0.35186E-04 1/N.m.]

= 0.371/0.865E-04
= 0.42937E+04 lbf. [0.19098E+02 kN]

= 0.559/0.233E-03
= 0.24014E+04 ft.lb. [0.32558E+04 N.m.]
= -0.371/0.233E-03
= -.15956E+04 ft.lb. [-0.21632E+04 N.m.]

= 0.465/0.477E-04
= 0.97491E+04 ft.lb. [0.13217E+05 N.m.]

= 1.285 / (Rt)^0.5
= 1.285/(295.472 * 0.591 )^0.5
= 0.97278E-01 1/in. [0.38299E-02 1/mm.]

= (0.036*G*H*R^2)/Et
= (0.036*0.997 *482.283 *295.472^2)/29297606 *0.591
* [1-(e^-(0.097 *476.370 )) * cos(0.097 *476.370 ) - (476.370/482.28 )]
+ 0.667E+01 * 295.472 * 0.000
= 0.00107 in. [0.02720 mm.]

= (0.036*G*H*R^2)/E*t
= (0.036*0.997 *482.283 *295.472^2)/29297606 *0.591
* [(1/482.283 )-(0.097 *e^-(0.097 *476.370 ))
* [cos(0.097 *476.370 )+sin(0.097 *476.370 )]]
= 0.10377E-01 deg

= a/(Rt)^0.5
= 2.000/(295.472 * 0.591 )^0.5
= 0.151

= L + a
= 476.370 + 2.000
= 478.370 in. [12150.598 mm.]

= L - a
= 476.370 - 2.000
= 474.370 in. [12048.998 mm.]

= L
= 476.370 in. [12099.798 mm.]

YF = 2.946
YL = 13.037

YC = 49.722

= pi * a^2 * P
= 3.1415 * 2.000^2 * 0.213
= 2.675 lbf. [0.012 kN]

= max[(1 - 0.75)(XA / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(478.370/(295.472 *0.591 )^0.5), 0.1]
= 0.100

= max[(1 - 0.75)(XB / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(474.370/(295.472 *0.591 )^0.5), 0.1]
= 0.100

= max[(1 - 0.75)(XC / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(476.370/(295.472 *0.591 )^0.5), 0.1]
= 0.100

= lamda / (2 * YF * FP)
= 0.151/(2 * 2.946 * 2.675 )
= 0.96034E-02 1/lbf. [0.21590E+01 1/kN]

= lamda / (a / 12.0 * YL * FP)
= 0.151/(2.000/12.0 * 13.037 * 2.675 )
= 0.26044E-01 1/ft.lb. [0.19210E-01 1/N.m.]

= lamda / (a * 12.0 * YC * FP)
= 0.151/(2.000 * 12.0 * 49.722 * 2.675 )
= 0.68290E-02 1/ft.lb. [0.50370E-02 1/N.m.]

= 0.100/0.960E-02
= 0.10413E+02 lbf. [0.46317E-01 kN]
= 0.100/0.260E-01
= 0.38396E+01 ft.lb. [0.52056E+01 N.m.]
= -0.100/0.260E-01
= -.38396E+01 ft.lb. [-0.52056E+01 N.m.]

= 0.100/0.683E-02
= 0.14643E+02 ft.lb. [0.19853E+02 N.m.]

= 1.285 / (Rt)^0.5
= 1.285/(295.472 * 0.709 )^0.5
= 0.88803E-01 1/in. [0.34962E-02 1/mm.]

= (0.036*G*H*R^2)/Et
= (0.036*0.997 *482.283 *295.472^2)/29297606 *0.709
* [1-(e^-(0.089 *476.370 )) * cos(0.089 *476.370 ) - (476.370/482.28 )]
+ 0.667E+01 * 295.472 * 0.000
= 0.00089 in. [0.02267 mm.]

= (0.036*G*H*R^2)/E*t
= (0.036*0.997 *482.283 *295.472^2)/29297606 *0.709

* [(1/482.283 )-(0.089 *e^-(0.089 *476.370 ))
* [cos(0.089 *476.370 )+sin(0.089 *476.370 )]]
= 0.86474E-02 deg

= a/(Rt)^0.5
= 2.000/(295.472 * 0.709 )^0.5
= 0.138

= L + a
= 476.370 + 2.000
= 478.370 in. [12150.598 mm.]

= L - a
= 476.370 - 2.000
= 474.370 in. [12048.998 mm.]

= L
= 476.370 in. [12099.798 mm.]

YF = 3.151
YL = 13.995

YC = 60.010

= pi * a^2 * P
= 3.1415 * 2.000^2 * 0.213
= 2.675 lbf. [0.012 kN]

= max[(1 - 0.75)(XA / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(478.370/(295.472 *0.709 )^0.5), 0.1]
= 0.100

= max[(1 - 0.75)(XB / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(474.370/(295.472 *0.709 )^0.5), 0.1]
= 0.100

= max[(1 - 0.75)(XC / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(476.370/(295.472 *0.709 )^0.5), 0.1]
= 0.100

= lamda / (2 * YF * FP)
= 0.138/(2 * 3.151 * 2.675 )
= 0.81970E-02 1/lbf. [0.18429E+01 1/kN]

= lamda / (a / 12.0 * YL * FP)
= 0.138/(2.000/12.0 * 13.995 * 2.675 )
= 0.22148E-01 1/ft.lb. [0.16336E-01 1/N.m.]

= lamda / (a * 12.0 * YC * FP)
= 0.138/(2.000 * 12.0 * 60.010 * 2.675 )
= 0.51652E-02 1/ft.lb. [0.38099E-02 1/N.m.]

= 0.100/0.820E-02
= 0.12200E+02 lbf. [0.54263E-01 kN]
= 0.100/0.221E-01
= 0.45150E+01 ft.lb. [0.61213E+01 N.m.]
= -0.100/0.221E-01
= -.45150E+01 ft.lb. [-0.61213E+01 N.m.]

= 0.100/0.517E-02
= 0.19360E+02 ft.lb. [0.26248E+02 N.m.]

= 1.285 / (Rt)^0.5
= 1.285/(295.472 * 0.709 )^0.5
= 0.88803E-01 1/in. [0.34962E-02 1/mm.]

= (0.036*G*H*R^2)/Et
= (0.036*0.997 *482.283 *295.472^2)/29297606 *0.709
* [1-(e^-(0.089 *476.370 )) * cos(0.089 *476.370 ) - (476.370/482.28 )]
+ 0.667E+01 * 295.472 * 0.000
= 0.00089 in. [0.02267 mm.]

= (0.036*G*H*R^2)/E*t
= (0.036*0.997 *482.283 *295.472^2)/29297606 *0.709
* [(1/482.283 )-(0.089 *e^-(0.089 *476.370 ))
* [cos(0.089 *476.370 )+sin(0.089 *476.370 )]]
= 0.86474E-02 deg

= a/(Rt)^0.5
= 2.000/(295.472 * 0.709 )^0.5
= 0.138

= L + a
= 476.370 + 2.000
= 478.370 in. [12150.598 mm.]

= L - a
= 476.370 - 2.000
= 474.370 in. [12048.998 mm.]

= L
= 476.370 in. [12099.798 mm.]

YF = 3.151
YL = 13.995

YC = 60.010

= pi * a^2 * P
= 3.1415 * 2.000^2 * 0.213
= 2.675 lbf. [0.012 kN]

= max[(1 - 0.75)(XA / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(478.370/(295.472 *0.709 )^0.5), 0.1]
= 0.100

= max[(1 - 0.75)(XB / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(474.370/(295.472 *0.709 )^0.5), 0.1]
= 0.100

= max[(1 - 0.75)(XC / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(476.370/(295.472 *0.709 )^0.5), 0.1]
= 0.100

= lamda / (2 * YF * FP)
= 0.138/(2 * 3.151 * 2.675 )
= 0.81970E-02 1/lbf. [0.18429E+01 1/kN]

= lamda / (a / 12.0 * YL * FP)
= 0.138/(2.000/12.0 * 13.995 * 2.675 )
= 0.22148E-01 1/ft.lb. [0.16336E-01 1/N.m.]

= lamda / (a * 12.0 * YC * FP)
= 0.138/(2.000 * 12.0 * 60.010 * 2.675 )
= 0.51652E-02 1/ft.lb. [0.38099E-02 1/N.m.]

= 0.100/0.820E-02
= 0.12200E+02 lbf. [0.54263E-01 kN]
= 0.100/0.221E-01
= 0.45150E+01 ft.lb. [0.61213E+01 N.m.]
= -0.100/0.221E-01
= -.45150E+01 ft.lb. [-0.61213E+01 N.m.]

= 0.100/0.517E-02
= 0.19360E+02 ft.lb. [0.26248E+02 N.m.]

= 1.285 / (Rt)^0.5
= 1.285/(295.472 * 0.669 )^0.5
= 0.91377E-01 1/in. [0.35975E-02 1/mm.]

= (0.036*G*H*R^2)/Et
= (0.036*0.997 *482.283 *295.472^2)/29297606 *0.669
* [1-(e^-(0.091 *196.800 )) * cos(0.091 *196.800 ) - (196.800/482.28 )]
+ 0.667E+01 * 295.472 * 0.000
= 0.04562 in. [1.15877 mm.]

= (0.036*G*H*R^2)/E*t
= (0.036*0.997 *482.283 *295.472^2)/29297606 *0.669
* [(1/482.283 )-(0.091 *e^-(0.091 *196.800 ))
* [cos(0.091 *196.800 )+sin(0.091 *196.800 )]]
= 0.91560E-02 deg

= a/(Rt)^0.5
= 1.500/(295.472 * 0.669 )^0.5
= 0.107

= L + a
= 196.800 + 1.500
= 198.300 in. [5036.820 mm.]

= L - a
= 196.800 - 1.500
= 195.300 in. [4960.620 mm.]

= L
= 196.800 in. [4998.720 mm.]

YF = 3.814
YL = 17.119

YC = 102.416

= pi * a^2 * P
= 3.1415 * 1.500^2 * 10.278
= 72.652 lbf. [0.323 kN]

= max[(1 - 0.75)(XA / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(198.300/(295.472 *0.669 )^0.5), 0.1]
= 0.100

= max[(1 - 0.75)(XB / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(195.300/(295.472 *0.669 )^0.5), 0.1]
= 0.100

= max[(1 - 0.75)(XC / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(196.800/(295.472 *0.669 )^0.5), 0.1]
= 0.100

= lamda / (2 * YF * FP)
= 0.107/(2 * 3.814 * 72.652 )
= 0.19246E-03 1/lbf. [0.43269E-01 1/kN]

= lamda / (a / 12.0 * YL * FP)
= 0.107/(1.500/12.0 * 17.119 * 72.652 )
= 0.68610E-03 1/ft.lb. [0.50606E-03 1/N.m.]

= lamda / (a * 12.0 * YC * FP)
= 0.107/(1.500 * 12.0 * 102.416 * 72.652 )
= 0.11468E-03 1/ft.lb. [0.84589E-04 1/N.m.]

= 0.100/0.192E-03
= 0.51959E+03 lbf. [0.23111E+01 kN]
= 0.100/0.686E-03
= 0.14575E+03 ft.lb. [0.19760E+03 N.m.]
= -0.100/0.686E-03
= -.14575E+03 ft.lb. [-0.19760E+03 N.m.]

= 0.100/0.115E-03
= 0.87197E+03 ft.lb. [0.11822E+04 N.m.]

= 1.285 / (Rt)^0.5
= 1.285/(295.472 * 0.787 )^0.5
= 0.84245E-01 1/in. [0.33168E-02 1/mm.]

= (0.036*G*H*R^2)/Et
= (0.036*0.997 *482.283 *295.472^2)/29297606 *0.787
* [1-(e^-(0.084 *196.800 )) * cos(0.084 *196.800 ) - (196.800/482.28 )]
+ 0.667E+01 * 295.472 * 0.000
= 0.03878 in. [0.98496 mm.]

= (0.036*G*H*R^2)/E*t
= (0.036*0.997 *482.283 *295.472^2)/29297606 *0.787
* [(1/482.283 )-(0.084 *e^-(0.084 *196.800 ))
* [cos(0.084 *196.800 )+sin(0.084 *196.800 )]]
= 0.77826E-02 deg

= a/(Rt)^0.5
= 1.500/(295.472 * 0.787 )^0.5
= 0.098

= L + a
= 196.800 + 1.500
= 198.300 in. [5036.820 mm.]

= L - a
= 196.800 - 1.500
= 195.300 in. [4960.620 mm.]

= L
= 196.800 in. [4998.720 mm.]

YF = 4.000
YL = 18.000

YC = 117.000

= pi * a^2 * P
= 3.1415 * 1.500^2 * 10.278
= 72.652 lbf. [0.323 kN]

= max[(1 - 0.75)(XA / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(198.300/(295.472 *0.787 )^0.5), 0.1]
= 0.100

= max[(1 - 0.75)(XB / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(195.300/(295.472 *0.787 )^0.5), 0.1]
= 0.100

= max[(1 - 0.75)(XC / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(196.800/(295.472 *0.787 )^0.5), 0.1]
= 0.100

= lamda / (2 * YF * FP)
= 0.098/(2 * 4.000 * 72.652 )
= 0.16920E-03 1/lbf. [0.38039E-01 1/kN]

= lamda / (a / 12.0 * YL * FP)
= 0.098/(1.500/12.0 * 18.000 * 72.652 )
= 0.60159E-03 1/ft.lb. [0.44373E-03 1/N.m.]

= lamda / (a * 12.0 * YC * FP)
= 0.098/(1.500 * 12.0 * 117.000 * 72.652 )
= 0.92553E-04 1/ft.lb. [0.68266E-04 1/N.m.]

= 0.100/0.169E-03
= 0.59102E+03 lbf. [0.26289E+01 kN]
= 0.100/0.602E-03
= 0.16623E+03 ft.lb. [0.22536E+03 N.m.]
= -0.100/0.602E-03
= -.16623E+03 ft.lb. [-0.22536E+03 N.m.]

= 0.100/0.926E-04
= 0.10805E+04 ft.lb. [0.14649E+04 N.m.]

= 1.285 / (Rt)^0.5
= 1.285/(295.472 * 0.787 )^0.5
= 0.84245E-01 1/in. [0.33168E-02 1/mm.]

= (0.036*G*H*R^2)/Et
= (0.036*0.997 *482.283 *295.472^2)/29297606 *0.787
* [1-(e^-(0.084 *196.800 )) * cos(0.084 *196.800 ) - (196.800/482.28 )]
+ 0.667E+01 * 295.472 * 0.000
= 0.03878 in. [0.98496 mm.]

= (0.036*G*H*R^2)/E*t
= (0.036*0.997 *482.283 *295.472^2)/29297606 *0.787
* [(1/482.283 )-(0.084 *e^-(0.084 *196.800 ))
* [cos(0.084 *196.800 )+sin(0.084 *196.800 )]]
= 0.77826E-02 deg

= a/(Rt)^0.5
= 1.500/(295.472 * 0.787 )^0.5
= 0.098

= L + a
= 196.800 + 1.500
= 198.300 in. [5036.820 mm.]

= L - a
= 196.800 - 1.500
= 195.300 in. [4960.620 mm.]

= L
= 196.800 in. [4998.720 mm.]

YF = 4.000
YL = 18.000

YC = 117.000

= pi * a^2 * P
= 3.1415 * 1.500^2 * 10.278
= 72.652 lbf. [0.323 kN]

= max[(1 - 0.75)(XA / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(198.300/(295.472 *0.787 )^0.5), 0.1]
= 0.100

= max[(1 - 0.75)(XB / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(195.300/(295.472 *0.787 )^0.5), 0.1]
= 0.100

= max[(1 - 0.75)(XC / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(196.800/(295.472 *0.787 )^0.5), 0.1]
= 0.100

= lamda / (2 * YF * FP)
= 0.098/(2 * 4.000 * 72.652 )
= 0.16920E-03 1/lbf. [0.38039E-01 1/kN]

= lamda / (a / 12.0 * YL * FP)
= 0.098/(1.500/12.0 * 18.000 * 72.652 )
= 0.60159E-03 1/ft.lb. [0.44373E-03 1/N.m.]

= lamda / (a * 12.0 * YC * FP)
= 0.098/(1.500 * 12.0 * 117.000 * 72.652 )
= 0.92553E-04 1/ft.lb. [0.68266E-04 1/N.m.]

= 0.100/0.169E-03
= 0.59102E+03 lbf. [0.26289E+01 kN]
= 0.100/0.602E-03
= 0.16623E+03 ft.lb. [0.22536E+03 N.m.]
= -0.100/0.602E-03
= -.16623E+03 ft.lb. [-0.22536E+03 N.m.]

= 0.100/0.926E-04
= 0.10805E+04 ft.lb. [0.14649E+04 N.m.]

= 1.285 / (Rt)^0.5
= 1.285/(295.472 * 0.669 )^0.5
= 0.91377E-01 1/in. [0.35975E-02 1/mm.]

= (0.036*G*H*R^2)/Et
= (0.036*0.997 *482.283 *295.472^2)/29297606 *0.669
* [1-(e^-(0.091 *196.850 )) * cos(0.091 *196.850 ) - (196.850/482.28 )]
+ 0.667E+01 * 295.472 * 0.000
= 0.04561 in. [1.15857 mm.]

= (0.036*G*H*R^2)/E*t
= (0.036*0.997 *482.283 *295.472^2)/29297606 *0.669
* [(1/482.283 )-(0.091 *e^-(0.091 *196.850 ))
* [cos(0.091 *196.850 )+sin(0.091 *196.850 )]]
= 0.91560E-02 deg

= a/(Rt)^0.5
= 3.000/(295.472 * 0.669 )^0.5
= 0.213

= L + a
= 196.850 + 3.000
= 199.850 in. [5076.190 mm.]

= L - a
= 196.850 - 3.000
= 193.850 in. [4923.790 mm.]

= L
= 196.850 in. [4999.990 mm.]

YF = 2.227
YL = 9.605

YC = 24.468

= pi * a^2 * P
= 3.1415 * 3.000^2 * 10.276
= 290.558 lbf. [1.292 kN]

= max[(1 - 0.75)(XA / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(199.850/(295.472 *0.669 )^0.5), 0.1]
= 0.100

= max[(1 - 0.75)(XB / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(193.850/(295.472 *0.669 )^0.5), 0.1]
= 0.100

= max[(1 - 0.75)(XC / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(196.850/(295.472 *0.669 )^0.5), 0.1]
= 0.100

= lamda / (2 * YF * FP)
= 0.213/(2 * 2.227 * 290.558 )
= 0.16484E-03 1/lbf. [0.37060E-01 1/kN]

= lamda / (a / 12.0 * YL * FP)
= 0.213/(3.000/12.0 * 9.605 * 290.558 )
= 0.30575E-03 1/ft.lb. [0.22552E-03 1/N.m.]

= lamda / (a * 12.0 * YC * FP)
= 0.213/(3.000 * 12.0 * 24.468 * 290.558 )
= 0.12003E-03 1/ft.lb. [0.88533E-04 1/N.m.]

= 0.100/0.165E-03
= 0.60664E+03 lbf. [0.26983E+01 kN]
= 0.100/0.306E-03
= 0.32706E+03 ft.lb. [0.44342E+03 N.m.]
= -0.100/0.306E-03
= -.32706E+03 ft.lb. [-0.44342E+03 N.m.]

= 0.100/0.120E-03
= 0.83313E+03 ft.lb. [0.11295E+04 N.m.]

= 1.285 / (Rt)^0.5
= 1.285/(295.472 * 0.787 )^0.5
= 0.84245E-01 1/in. [0.33168E-02 1/mm.]

= (0.036*G*H*R^2)/Et
= (0.036*0.997 *482.283 *295.472^2)/29297606 *0.787
* [1-(e^-(0.084 *196.850 )) * cos(0.084 *196.850 ) - (196.850/482.28 )]
+ 0.667E+01 * 295.472 * 0.000
= 0.03877 in. [0.98479 mm.]

= (0.036*G*H*R^2)/E*t
= (0.036*0.997 *482.283 *295.472^2)/29297606 *0.787
* [(1/482.283 )-(0.084 *e^-(0.084 *196.850 ))
* [cos(0.084 *196.850 )+sin(0.084 *196.850 )]]
= 0.77826E-02 deg

= a/(Rt)^0.5
= 3.000/(295.472 * 0.787 )^0.5
= 0.197

= L + a
= 196.850 + 3.000
= 199.850 in. [5076.190 mm.]

= L - a
= 196.850 - 3.000
= 193.850 in. [4923.790 mm.]

= L
= 196.850 in. [4999.990 mm.]

YF = 2.430
YL = 10.637

YC = 28.983

= pi * a^2 * P
= 3.1415 * 3.000^2 * 10.276
= 290.558 lbf. [1.292 kN]

= max[(1 - 0.75)(XA / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(199.850/(295.472 *0.787 )^0.5), 0.1]
= 0.100

= max[(1 - 0.75)(XB / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(193.850/(295.472 *0.787 )^0.5), 0.1]
= 0.100

= max[(1 - 0.75)(XC / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(196.850/(295.472 *0.787 )^0.5), 0.1]
= 0.100

= lamda / (2 * YF * FP)
= 0.197/(2 * 2.430 * 290.558 )
= 0.13930E-03 1/lbf. [0.31316E-01 1/kN]

= lamda / (a / 12.0 * YL * FP)
= 0.197/(3.000/12.0 * 10.637 * 290.558 )
= 0.25454E-03 1/ft.lb. [0.18775E-03 1/N.m.]

= lamda / (a * 12.0 * YC * FP)
= 0.197/(3.000 * 12.0 * 28.983 * 290.558 )
= 0.93421E-04 1/ft.lb. [0.68907E-04 1/N.m.]

= 0.100/0.139E-03
= 0.71790E+03 lbf. [0.31932E+01 kN]
= 0.100/0.255E-03
= 0.39287E+03 ft.lb. [0.53264E+03 N.m.]
= -0.100/0.255E-03
= -.39287E+03 ft.lb. [-0.53264E+03 N.m.]

= 0.100/0.934E-04
= 0.10704E+04 ft.lb. [0.14512E+04 N.m.]

= 1.285 / (Rt)^0.5
= 1.285/(295.472 * 0.787 )^0.5
= 0.84245E-01 1/in. [0.33168E-02 1/mm.]

= (0.036*G*H*R^2)/Et
= (0.036*0.997 *482.283 *295.472^2)/29297606 *0.787
* [1-(e^-(0.084 *196.850 )) * cos(0.084 *196.850 ) - (196.850/482.28 )]
+ 0.667E+01 * 295.472 * 0.000
= 0.03877 in. [0.98479 mm.]

= (0.036*G*H*R^2)/E*t
= (0.036*0.997 *482.283 *295.472^2)/29297606 *0.787
* [(1/482.283 )-(0.084 *e^-(0.084 *196.850 ))
* [cos(0.084 *196.850 )+sin(0.084 *196.850 )]]
= 0.77826E-02 deg

= a/(Rt)^0.5
= 3.000/(295.472 * 0.787 )^0.5
= 0.197

= L + a
= 196.850 + 3.000
= 199.850 in. [5076.190 mm.]

= L - a
= 196.850 - 3.000
= 193.850 in. [4923.790 mm.]

= L
= 196.850 in. [4999.990 mm.]

YF = 2.430
YL = 10.637

YC = 28.983

= pi * a^2 * P
= 3.1415 * 3.000^2 * 10.276
= 290.558 lbf. [1.292 kN]

= max[(1 - 0.75)(XA / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(199.850/(295.472 *0.787 )^0.5), 0.1]
= 0.100

= max[(1 - 0.75)(XB / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(193.850/(295.472 *0.787 )^0.5), 0.1]
= 0.100

= max[(1 - 0.75)(XC / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(196.850/(295.472 *0.787 )^0.5), 0.1]
= 0.100

= lamda / (2 * YF * FP)
= 0.197/(2 * 2.430 * 290.558 )
= 0.13930E-03 1/lbf. [0.31316E-01 1/kN]

= lamda / (a / 12.0 * YL * FP)
= 0.197/(3.000/12.0 * 10.637 * 290.558 )
= 0.25454E-03 1/ft.lb. [0.18775E-03 1/N.m.]

= lamda / (a * 12.0 * YC * FP)
= 0.197/(3.000 * 12.0 * 28.983 * 290.558 )
= 0.93421E-04 1/ft.lb. [0.68907E-04 1/N.m.]

= 0.100/0.139E-03
= 0.71790E+03 lbf. [0.31932E+01 kN]
= 0.100/0.255E-03
= 0.39287E+03 ft.lb. [0.53264E+03 N.m.]
= -0.100/0.255E-03
= -.39287E+03 ft.lb. [-0.53264E+03 N.m.]

= 0.100/0.934E-04
= 0.10704E+04 ft.lb. [0.14512E+04 N.m.]

= 1.285 / (Rt)^0.5
= 1.285/(295.472 * 0.354 )^0.5
= 0.12559E+00 1/in. [0.49443E-02 1/mm.]

= (0.036*G*H*R^2)/Et
= (0.036*0.997 *482.283 *295.472^2)/29297606 *0.354
* [1-(e^-(0.126 *9.840 )) * cos(0.126 *9.840 ) - (9.840/482.28 )]

+ 0.667E+01 * 295.472 * 0.000
= 0.12870 in. [3.26889 mm.]

= (0.036*G*H*R^2)/E*t
= (0.036*0.997 *482.283 *295.472^2)/29297606 *0.354
* [(1/482.283 )-(0.126 *e^-(0.126 *9.840 ))
* [cos(0.126 *9.840 )+sin(0.126 *9.840 )]]
= -0.37029E+00 deg

= a/(Rt)^0.5
= 1.000/(295.472 * 0.354 )^0.5
= 0.098

= L + a
= 9.840 + 1.000
= 10.840 in. [275.336 mm.]

= L - a
= 9.840 - 1.000
= 8.840 in. [224.536 mm.]

= L
= 9.840 in. [249.936 mm.]

YF = 4.000
YL = 18.000

YC = 117.000

= pi * a^2 * P
= 3.1415 * 1.000^2 * 17.009
= 53.436 lbf. [0.238 kN]

= max[(1 - 0.75)(XA / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(10.840/(295.472 *0.354 )^0.5), 0.1]
= 0.205

= max[(1 - 0.75)(XB / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(8.840/(295.472 *0.354 )^0.5), 0.1]
= 0.352

= max[(1 - 0.75)(XC / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(9.840/(295.472 *0.354 )^0.5), 0.1]
= 0.279

= lamda / (2 * YF * FP)
= 0.098/(2 * 4.000 * 53.436 )
= 0.22862E-03 1/lbf. [0.51398E-01 1/kN]

= lamda / (a / 12.0 * YL * FP)
= 0.098/(1.000/12.0 * 18.000 * 53.436 )
= 0.12193E-02 1/ft.lb. [0.89935E-03 1/N.m.]

= lamda / (a * 12.0 * YC * FP)

= 0.098/(1.000 * 12.0 * 117.000 * 53.436 )
= 0.18758E-03 1/ft.lb. [0.13836E-03 1/N.m.]

= 0.205/0.229E-03
= 0.89861E+03 lbf. [0.39970E+01 kN]
= 0.352/0.122E-02
= 0.28872E+03 ft.lb. [0.39144E+03 N.m.]
= -0.205/0.122E-02
= -.16849E+03 ft.lb. [-0.22843E+03 N.m.]

= 0.279/0.188E-03
= 0.14859E+04 ft.lb. [0.20146E+04 N.m.]

= 1.285 / (Rt)^0.5
= 1.285/(295.472 * 0.472 )^0.5
= 0.10876E+00 1/in. [0.42819E-02 1/mm.]

= (0.036*G*H*R^2)/Et
= (0.036*0.997 *482.283 *295.472^2)/29297606 *0.472
* [1-(e^-(0.109 *9.840 )) * cos(0.109 *9.840 ) - (9.840/482.28 )]
+ 0.667E+01 * 295.472 * 0.000
= 0.08898 in. [2.26021 mm.]

= (0.036*G*H*R^2)/E*t
= (0.036*0.997 *482.283 *295.472^2)/29297606 *0.472
* [(1/482.283 )-(0.109 *e^-(0.109 *9.840 ))
* [cos(0.109 *9.840 )+sin(0.109 *9.840 )]]
= -0.30371E+00 deg

= a/(Rt)^0.5
= 1.000/(295.472 * 0.472 )^0.5
= 0.085

= L + a
= 9.840 + 1.000
= 10.840 in. [275.336 mm.]

= L - a
= 9.840 - 1.000
= 8.840 in. [224.536 mm.]

= L
= 9.840 in. [249.936 mm.]

YF = 4.000
YL = 18.000

YC = 117.000

= pi * a^2 * P
= 3.1415 * 1.000^2 * 17.009
= 53.436 lbf. [0.238 kN]

= max[(1 - 0.75)(XA / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(10.840/(295.472 *0.472 )^0.5), 0.1]
= 0.312

= max[(1 - 0.75)(XB / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(8.840/(295.472 *0.472 )^0.5), 0.1]
= 0.439

= max[(1 - 0.75)(XC / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(9.840/(295.472 *0.472 )^0.5), 0.1]
= 0.375

= lamda / (2 * YF * FP)
= 0.085/(2 * 4.000 * 53.436 )
= 0.19799E-03 1/lbf. [0.44512E-01 1/kN]

= lamda / (a / 12.0 * YL * FP)
= 0.085/(1.000/12.0 * 18.000 * 53.436 )
= 0.10559E-02 1/ft.lb. [0.77886E-03 1/N.m.]

= lamda / (a * 12.0 * YC * FP)
= 0.085/(1.000 * 12.0 * 117.000 * 53.436 )
= 0.16245E-03 1/ft.lb. [0.11982E-03 1/N.m.]

= 0.312/0.198E-03
= 0.15753E+04 lbf. [0.70069E+01 kN]
= 0.439/0.106E-02
= 0.41560E+03 ft.lb. [0.56345E+03 N.m.]
= -0.312/0.106E-02
= -.29537E+03 ft.lb. [-0.40044E+03 N.m.]

= 0.375/0.162E-03
= 0.23106E+04 ft.lb. [0.31327E+04 N.m.]

= 1.285 / (Rt)^0.5
= 1.285/(295.472 * 0.472 )^0.5
= 0.10876E+00 1/in. [0.42819E-02 1/mm.]

= (0.036*G*H*R^2)/Et
= (0.036*0.997 *482.283 *295.472^2)/29297606 *0.472
* [1-(e^-(0.109 *9.840 )) * cos(0.109 *9.840 ) - (9.840/482.28 )]
+ 0.667E+01 * 295.472 * 0.000
= 0.08898 in. [2.26021 mm.]

= (0.036*G*H*R^2)/E*t
= (0.036*0.997 *482.283 *295.472^2)/29297606 *0.472
* [(1/482.283 )-(0.109 *e^-(0.109 *9.840 ))
* [cos(0.109 *9.840 )+sin(0.109 *9.840 )]]
= -0.30371E+00 deg

= a/(Rt)^0.5
= 1.000/(295.472 * 0.472 )^0.5
= 0.085

= L + a
= 9.840 + 1.000
= 10.840 in. [275.336 mm.]

= L - a
= 9.840 - 1.000
= 8.840 in. [224.536 mm.]

= L
= 9.840 in. [249.936 mm.]

YF = 4.000
YL = 18.000

YC = 117.000

= pi * a^2 * P
= 3.1415 * 1.000^2 * 17.009
= 53.436 lbf. [0.238 kN]

= max[(1 - 0.75)(XA / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(10.840/(295.472 *0.472 )^0.5), 0.1]
= 0.312

= max[(1 - 0.75)(XB / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(8.840/(295.472 *0.472 )^0.5), 0.1]
= 0.439

= max[(1 - 0.75)(XC / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(9.840/(295.472 *0.472 )^0.5), 0.1]
= 0.375

= lamda / (2 * YF * FP)
= 0.085/(2 * 4.000 * 53.436 )
= 0.19799E-03 1/lbf. [0.44512E-01 1/kN]

= lamda / (a / 12.0 * YL * FP)
= 0.085/(1.000/12.0 * 18.000 * 53.436 )
= 0.10559E-02 1/ft.lb. [0.77886E-03 1/N.m.]

= lamda / (a * 12.0 * YC * FP)
= 0.085/(1.000 * 12.0 * 117.000 * 53.436 )
= 0.16245E-03 1/ft.lb. [0.11982E-03 1/N.m.]

= 0.312/0.198E-03
= 0.15753E+04 lbf. [0.70069E+01 kN]
= 0.439/0.106E-02
= 0.41560E+03 ft.lb. [0.56345E+03 N.m.]
= -0.312/0.106E-02
= -.29537E+03 ft.lb. [-0.40044E+03 N.m.]

= 0.375/0.162E-03
= 0.23106E+04 ft.lb. [0.31327E+04 N.m.]

= 1.285 / (Rt)^0.5
= 1.285/(295.472 * 0.354 )^0.5
= 0.12559E+00 1/in. [0.49443E-02 1/mm.]

= (0.036*G*H*R^2)/Et
= (0.036*0.997 *482.283 *295.472^2)/29297606 *0.354
* [1-(e^-(0.126 *196.850 )) * cos(0.126 *196.850 ) - (196.850/482.28 )]
+ 0.667E+01 * 295.472 * 0.000
= 0.08616 in. [2.18841 mm.]

= (0.036*G*H*R^2)/E*t
= (0.036*0.997 *482.283 *295.472^2)/29297606 *0.354
* [(1/482.283 )-(0.126 *e^-(0.126 *196.850 ))
* [cos(0.126 *196.850 )+sin(0.126 *196.850 )]]
= 0.17295E-01 deg

= a/(Rt)^0.5
= 0.750/(295.472 * 0.354 )^0.5
= 0.073

= L + a
= 196.850 + 0.750
= 197.600 in. [5019.040 mm.]

= L - a
= 196.850 - 0.750
= 196.100 in. [4980.940 mm.]

= L
= 196.850 in. [4999.990 mm.]

YF = 4.000
YL = 18.000

YC = 117.000

= pi * a^2 * P
= 3.1415 * 0.750^2 * 10.276
= 18.160 lbf. [0.081 kN]

= max[(1 - 0.75)(XA / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(197.600/(295.472 *0.354 )^0.5), 0.1]
= 0.100

= max[(1 - 0.75)(XB / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(196.100/(295.472 *0.354 )^0.5), 0.1]
= 0.100

= max[(1 - 0.75)(XC / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(196.850/(295.472 *0.354 )^0.5), 0.1]
= 0.100

= lamda / (2 * YF * FP)
= 0.073/(2 * 4.000 * 18.160 )
= 0.50454E-03 1/lbf. [0.11343E+00 1/kN]

= lamda / (a / 12.0 * YL * FP)
= 0.073/(0.750/12.0 * 18.000 * 18.160 )
= 0.35878E-02 1/ft.lb. [0.26464E-02 1/N.m.]

= lamda / (a * 12.0 * YC * FP)
= 0.073/(0.750 * 12.0 * 117.000 * 18.160 )
= 0.55197E-03 1/ft.lb. [0.40713E-03 1/N.m.]

= 0.100/0.505E-03
= 0.19820E+03 lbf. [0.88160E+00 kN]
= 0.100/0.359E-02
= 0.27872E+02 ft.lb. [0.37788E+02 N.m.]
= -0.100/0.359E-02
= -.27872E+02 ft.lb. [-0.37788E+02 N.m.]

= 0.100/0.552E-03
= 0.18117E+03 ft.lb. [0.24562E+03 N.m.]

= 1.285 / (Rt)^0.5
= 1.285/(295.472 * 0.472 )^0.5
= 0.10876E+00 1/in. [0.42819E-02 1/mm.]

= (0.036*G*H*R^2)/Et
= (0.036*0.997 *482.283 *295.472^2)/29297606 *0.472
* [1-(e^-(0.109 *196.850 )) * cos(0.109 *196.850 ) - (196.850/482.28 )]
+ 0.667E+01 * 295.472 * 0.000
= 0.06462 in. [1.64131 mm.]

= (0.036*G*H*R^2)/E*t
= (0.036*0.997 *482.283 *295.472^2)/29297606 *0.472
* [(1/482.283 )-(0.109 *e^-(0.109 *196.850 ))
* [cos(0.109 *196.850 )+sin(0.109 *196.850 )]]
= 0.12971E-01 deg

= a/(Rt)^0.5
= 0.750/(295.472 * 0.472 )^0.5
= 0.063

= L + a
= 196.850 + 0.750
= 197.600 in. [5019.040 mm.]

= L - a
= 196.850 - 0.750
= 196.100 in. [4980.940 mm.]

= L
= 196.850 in. [4999.990 mm.]

YF = 4.000
YL = 18.000

YC = 117.000

= pi * a^2 * P
= 3.1415 * 0.750^2 * 10.276
= 18.160 lbf. [0.081 kN]

= max[(1 - 0.75)(XA / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(197.600/(295.472 *0.472 )^0.5), 0.1]
= 0.100

= max[(1 - 0.75)(XB / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(196.100/(295.472 *0.472 )^0.5), 0.1]
= 0.100

= max[(1 - 0.75)(XC / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(196.850/(295.472 *0.472 )^0.5), 0.1]
= 0.100

= lamda / (2 * YF * FP)
= 0.063/(2 * 4.000 * 18.160 )
= 0.43694E-03 1/lbf. [0.98234E-01 1/kN]

= lamda / (a / 12.0 * YL * FP)
= 0.063/(0.750/12.0 * 18.000 * 18.160 )

= 0.31072E-02 1/ft.lb. [0.22918E-02 1/N.m.]

= lamda / (a * 12.0 * YC * FP)
= 0.063/(0.750 * 12.0 * 117.000 * 18.160 )
= 0.47802E-03 1/ft.lb. [0.35259E-03 1/N.m.]

= 0.100/0.437E-03
= 0.22886E+03 lbf. [0.10180E+01 kN]
= 0.100/0.311E-02
= 0.32184E+02 ft.lb. [0.43633E+02 N.m.]
= -0.100/0.311E-02
= -.32184E+02 ft.lb. [-0.43633E+02 N.m.]

= 0.100/0.478E-03
= 0.20919E+03 ft.lb. [0.28362E+03 N.m.]

= 1.285 / (Rt)^0.5
= 1.285/(295.472 * 0.472 )^0.5
= 0.10876E+00 1/in. [0.42819E-02 1/mm.]

= (0.036*G*H*R^2)/Et
= (0.036*0.997 *482.283 *295.472^2)/29297606 *0.472
* [1-(e^-(0.109 *196.850 )) * cos(0.109 *196.850 ) - (196.850/482.28 )]
+ 0.667E+01 * 295.472 * 0.000
= 0.06462 in. [1.64131 mm.]

= (0.036*G*H*R^2)/E*t
= (0.036*0.997 *482.283 *295.472^2)/29297606 *0.472
* [(1/482.283 )-(0.109 *e^-(0.109 *196.850 ))
* [cos(0.109 *196.850 )+sin(0.109 *196.850 )]]
= 0.12971E-01 deg

= a/(Rt)^0.5
= 0.750/(295.472 * 0.472 )^0.5
= 0.063

= L + a
= 196.850 + 0.750
= 197.600 in. [5019.040 mm.]

= L - a
= 196.850 - 0.750
= 196.100 in. [4980.940 mm.]

= L
= 196.850 in. [4999.990 mm.]

YF = 4.000
YL = 18.000

YC = 117.000

= pi * a^2 * P
= 3.1415 * 0.750^2 * 10.276
= 18.160 lbf. [0.081 kN]

= max[(1 - 0.75)(XA / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(197.600/(295.472 *0.472 )^0.5), 0.1]
= 0.100

= max[(1 - 0.75)(XB / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(196.100/(295.472 *0.472 )^0.5), 0.1]
= 0.100

= max[(1 - 0.75)(XC / (Rt)^0.5), 0.1]
= max[(1 - 0.75)(196.850/(295.472 *0.472 )^0.5), 0.1]
= 0.100

= lamda / (2 * YF * FP)
= 0.063/(2 * 4.000 * 18.160 )
= 0.43694E-03 1/lbf. [0.98234E-01 1/kN]

= lamda / (a / 12.0 * YL * FP)
= 0.063/(0.750/12.0 * 18.000 * 18.160 )
= 0.31072E-02 1/ft.lb. [0.22918E-02 1/N.m.]

= lamda / (a * 12.0 * YC * FP)
= 0.063/(0.750 * 12.0 * 117.000 * 18.160 )
= 0.47802E-03 1/ft.lb. [0.35259E-03 1/N.m.]

= 0.100/0.437E-03
= 0.22886E+03 lbf. [0.10180E+01 kN]
= 0.100/0.311E-02
= 0.32184E+02 ft.lb. [0.43633E+02 N.m.]
= -0.100/0.311E-02
= -.32184E+02 ft.lb. [-0.43633E+02 N.m.]

= 0.100/0.478E-03
= 0.20919E+03 ft.lb. [0.28362E+03 N.m.]

Appendix V External Pressure Calculations:
Total Design External Pressure Loading per V.7 [Pr]:

= max[ DL + (Lr or S) + 0.4Pe, DL + Pe + 0.4(Lr or S)]
= max[ 9.647 + max[44.825, 0.000 ] + 0.4 * 10.443,
9.647 + 10.443 + 0.4 * max[44.825, 0.000 ]]
= max[ 58.649, 38.019 ]
= 58.649 psf [2.808 kPa]
Roof Plate required thickness per V.7.3.1 [tdome]:

= 4.47 * R * sqrt( Pr / E )
= 4.47 * 59.055 * sqrt( 58.649/29297462 )
= 0.373 in. [9.487 mm.]
Required area of roof/shell joint per V.7.3.2 [Areqd]:

= Pr * R * D / ( 3.375 * f )
= 58.649 * 59.055 * 49.245/( 3.375 * 23785.4 )
= 2.125 in.^2 [1370.770 mm.^2]
Length of roof considered in region per V.7.3.3 [Xdome]:

= 2.1 * sqrt( R * Tdome )
= 2.1 * sqrt( 59.055 * 0.373 )
= 9.863 in. [250.508 mm.]
Length of shell considered in region per V.7.3.4 [Xshell]:
Length of shell included (top)

= 1.47 * sqrt( D * ts1 )
= 1.47 * sqrt( 49.2 * 0.236 )
= 5.014 in. [127.348 mm.]
Length of shell included per V.7.2.4 (bottom)

= 1.47 * sqrt( D * tsn )
= 1.47 * sqrt( 49.2 * 0.472 )
= 7.090 in. [180.097 mm.]
Required area of top stiffener per V.7.3.5 [Astiff]:

= max[(Areqd - ( Xshell * ts1 ) - ( Xdome * tdome )),0]
= max[(2.125 - ( 5.014 * 0.236 ) - ( 9.863 * 0.373 )),0]
= 0.000 in.^2 [0.000 mm.^2]
Value of SI per V.8.1:

= ( Pe + 15 ) / 20 [ as Pe <= 15 ]
= ( 10.443 + 15 )/20
= 1.272
Transformed height of tank shell per V.8.1.4 [HTS]:

= h1(ts1/ts1)^2.5 + h2(ts1/ts2)^2.5
+ ... hn(ts1/tsn)^2.5
= 6.562 (0.236/0.236 )^2.5 + 6.562 (0.236/0.315 )^2.5
+ ... 3.609 (0.236/0.236 )^2.5
= 25.841 ft. [7876.389 mm.]
Elastic Buckling Check per V.8.1.1:

= sqrt(Fy / E)(HTS / D)((D / tsmin)^0.75)
= sqrt(38400.000/29297462 )(25.841/49.245 )((49.245/0.236 )^0.75)
= 1.042
Specified design wind velocity per V.3.1 [V]:

= Wind velocity (ft./Sec.) * 3600.0 / 5280.0
= 120.735 * 3600.0/5280.0
= 82.319 mph [36.800 m/sec]
Maximum wind pressure per V.3.1 [W]:

= 31( V / 120.0 ) ^2
= 31( 82.319/120.0 )^2
= 14.588 psf [0.698 kPa]
Design external pressure for shell per V.3.1 [Ps]:

= max( Pe, (W + 0.4*Pe)

= max( 10.443, (14.588 + 0.4*10.443 )
= 18.765 psf [0.898 kPa]
Max. design external pressure per V.8.1.2 [Ps(max)]:

= (0.6 * E) / ( D / tsmin )^2.5 * (HTS * SI) / D
= (0.6 * 29297462 )/( 49.245/0.236 )^2.5 * (25.841 * 1.272 )/49.245
= 41.964 psf [2.009 kPa]
Min. shell thickness for design ext. pressure per V.8.1.3 [tsmin]:
= 1.23( SI * HTS * Ps )^0.4 * D^0.6 / E^0.4
= 1.23( 1.272 * 25.841 * 18.765 )^0.4 * 49.245^0.6/29297462^0.4
= 0.172 in. [4.360 mm.]

3.- DIMENSIONAMIENTO DE LA ESTRUCTURA DEL TECHO.

OT1492/15
STRUCTURAL DESIGN
TANQUE DE SERVICIOS Y PCI - T3101
Project: CCSP ATACAMA I
Author: P.A.
Author: P.A. File: OT1492_Agua Servicios_rev0B_Sismo.rtd
Address: Project: CCSP ATACAMA I
Date : 25/04/15 Page : 2

Structure View
Date : 25/04/15 Page : 3

3D View
Data - Bars
Length Gamma
Bar Node 1 Node 2 Section Material Type
(m) (Deg)
1 1 2 PERF_U_140 S 275 0,27 0,0 ANILLO
2 2 3 PERF_U_140 S 275 0,26 0,0 ANILLO
3 3 4 PERF_U_140 S 275 0,27 0,0 ANILLO
4 4 5 PERF_U_140 S 275 0,27 0,0 ANILLO
5 5 6 PERF_U_140 S 275 0,27 0,0 ANILLO
6 6 7 PERF_U_140 S 275 0,26 0,0 ANILLO
7 7 8 PERF_U_140 S 275 0,27 0,0 ANILLO
8 8 9 PERF_U_140 S 275 0,27 0,0 ANILLO
9 9 10 PERF_U_140 S 275 0,27 0,0 ANILLO
10 10 11 PERF_U_140 S 275 0,26 0,0 ANILLO
11 11 12 PERF_U_140 S 275 0,27 0,0 ANILLO
12 12 13 PERF_U_140 S 275 0,27 0,0 ANILLO
13 13 14 PERF_U_140 S 275 0,27 0,0 ANILLO
14 14 15 PERF_U_140 S 275 0,27 0,0 ANILLO
15 15 16 PERF_U_140 S 275 0,26 0,0 ANILLO
16 16 17 PERF_U_140 S 275 0,27 0,0 ANILLO
17 17 18 PERF_U_140 S 275 0,27 0,0 ANILLO
18 18 19 PERF_U_140 S 275 0,27 0,0 ANILLO
Date : 25/04/15 Page : 4

Length Gamma
(m) (Deg)
19 19 20 PERF_U_140 S 275 0,26 0,0 ANILLO
20 20 21 PERF_U_140 S 275 0,27 0,0 ANILLO
21 21 22 PERF_U_140 S 275 0,27 0,0 ANILLO
22 22 23 PERF_U_140 S 275 0,27 0,0 ANILLO
23 23 24 PERF_U_140 S 275 0,26 0,0 ANILLO
24 24 25 PERF_U_140 S 275 0,27 0,0 ANILLO
25 25 26 PERF_U_140 S 275 0,27 0,0 ANILLO
26 26 1 PERF_U_140 S 275 0,27 0,0 ANILLO
27 27 28 IPN 140 S 275 1,05 0,0 ARRIOSTRADOS
53 53 45 CAE 70x7 S 275 3,59 0,0 TIRANTES
54 54 45 CAE 70x7 S 275 3,59 0,0 TIRANTES
55 55 33 CAE 70x7 S 275 3,59 0,0 TIRANTES
56 56 33 CAE 70x7 S 275 3,59 0,0 TIRANTES
57 57 38 CAE 70x7 S 275 3,59 0,0 TIRANTES
58 58 38 CAE 70x7 S 275 3,59 0,0 TIRANTES
59 59 51 CAE 70x7 S 275 3,59 0,0 TIRANTES
60 60 51 CAE 70x7 S 275 3,59 0,0 TIRANTES
61 2 11 IPN 140 S 275 1,95 0,0 VIGAS
62 24 15 IPN 140 S 275 1,95 0,0 VIGAS
63 61 62 IPN 140 S 275 0,83 0,0 ARCO
64 62 63 IPN 140 S 275 0,83 0,0 ARCO
65 63 64 IPN 140 S 275 0,83 0,0 ARCO
66 64 51 IPN 140 S 275 0,83 0,0 ARCO
Date : 25/04/15 Page : 5

Length Gamma
(m) (Deg)
67 51 65 IPN 140 S 275 0,83 0,0 ARCO
68 65 66 IPN 140 S 275 0,83 0,0 ARCO
69 66 67 IPN 140 S 275 0,83 0,0 ARCO
70 67 20 IPN 140 S 275 0,83 0,0 ARCO
71 60 68 IPN 140 S 275 0,83 0,0 ARCO
72 68 69 IPN 140 S 275 0,83 0,0 ARCO
73 69 70 IPN 140 S 275 0,83 0,0 ARCO
74 70 52 IPN 140 S 275 0,83 0,0 ARCO
75 52 71 IPN 140 S 275 0,83 0,0 ARCO
76 71 72 IPN 140 S 275 0,83 0,0 ARCO
77 72 73 IPN 140 S 275 0,83 0,0 ARCO
78 73 19 IPN 140 S 275 0,83 0,0 ARCO
79 74 75 IPN 140 S 275 0,83 0,0 ARCO
80 75 76 IPN 140 S 275 0,83 0,0 ARCO
81 76 77 IPN 140 S 275 0,83 0,0 ARCO
82 77 28 IPN 140 S 275 0,83 0,0 ARCO
83 28 78 IPN 140 S 275 0,83 0,0 ARCO
84 78 79 IPN 140 S 275 0,83 0,0 ARCO
85 79 80 IPN 140 S 275 0,83 0,0 ARCO
86 80 18 IPN 140 S 275 0,83 0,0 ARCO
87 81 82 IPN 140 S 275 0,83 0,0 ARCO
88 82 83 IPN 140 S 275 0,83 0,0 ARCO
89 83 84 IPN 140 S 275 0,83 0,0 ARCO
90 84 27 IPN 140 S 275 0,83 0,0 ARCO
91 27 85 IPN 140 S 275 0,83 0,0 ARCO
92 85 86 IPN 140 S 275 0,83 0,0 ARCO
93 86 87 IPN 140 S 275 0,83 0,0 ARCO
94 87 17 IPN 140 S 275 0,83 0,0 ARCO
95 88 89 IPN 140 S 275 0,83 0,0 ARCO
96 89 90 IPN 140 S 275 0,83 0,0 ARCO
97 90 91 IPN 140 S 275 0,83 0,0 ARCO
98 91 29 IPN 140 S 275 0,83 0,0 ARCO
99 29 92 IPN 140 S 275 0,83 0,0 ARCO
100 92 93 IPN 140 S 275 0,83 0,0 ARCO
101 93 94 IPN 140 S 275 0,83 0,0 ARCO
102 94 16 IPN 140 S 275 0,83 0,0 ARCO
103 95 96 IPN 140 S 275 0,83 0,0 ARCO
104 96 97 IPN 140 S 275 0,83 0,0 ARCO
105 97 98 IPN 140 S 275 0,83 0,0 ARCO
106 98 30 IPN 140 S 275 0,83 0,0 ARCO
107 30 99 IPN 140 S 275 0,83 0,0 ARCO
108 99 100 IPN 140 S 275 0,83 0,0 ARCO
109 100 101 IPN 140 S 275 0,83 0,0 ARCO
110 101 15 IPN 140 S 275 0,83 0,0 ARCO
111 102 103 IPN 140 S 275 0,83 0,0 ARCO
112 103 104 IPN 140 S 275 0,83 0,0 ARCO
113 104 105 IPN 140 S 275 0,83 0,0 ARCO
114 105 31 IPN 140 S 275 0,83 0,0 ARCO
Date : 25/04/15 Page : 6

Length Gamma
(m) (Deg)
115 31 106 IPN 140 S 275 0,83 0,0 ARCO
116 106 107 IPN 140 S 275 0,83 0,0 ARCO
117 107 108 IPN 140 S 275 0,83 0,0 ARCO
118 108 14 IPN 140 S 275 0,83 0,0 ARCO
119 55 109 IPN 140 S 275 0,83 0,0 ARCO
120 109 110 IPN 140 S 275 0,83 0,0 ARCO
121 110 111 IPN 140 S 275 0,83 0,0 ARCO
122 111 32 IPN 140 S 275 0,83 0,0 ARCO
123 32 112 IPN 140 S 275 0,83 0,0 ARCO
124 112 113 IPN 140 S 275 0,83 0,0 ARCO
125 113 114 IPN 140 S 275 0,83 0,0 ARCO
126 114 13 IPN 140 S 275 0,83 0,0 ARCO
127 115 116 IPN 140 S 275 0,83 0,0 ARCO
128 116 117 IPN 140 S 275 0,83 0,0 ARCO
129 117 118 IPN 140 S 275 0,83 0,0 ARCO
130 118 33 IPN 140 S 275 0,83 0,0 ARCO
131 33 119 IPN 140 S 275 0,83 0,0 ARCO
132 119 120 IPN 140 S 275 0,83 0,0 ARCO
133 120 121 IPN 140 S 275 0,83 0,0 ARCO
134 121 12 IPN 140 S 275 0,83 0,0 ARCO
135 56 122 IPN 140 S 275 0,83 0,0 ARCO
136 122 123 IPN 140 S 275 0,83 0,0 ARCO
137 123 124 IPN 140 S 275 0,83 0,0 ARCO
138 124 34 IPN 140 S 275 0,83 0,0 ARCO
139 34 125 IPN 140 S 275 0,83 0,0 ARCO
140 125 126 IPN 140 S 275 0,83 0,0 ARCO
141 126 127 IPN 140 S 275 0,83 0,0 ARCO
142 127 11 IPN 140 S 275 0,83 0,0 ARCO
143 128 129 IPN 140 S 275 0,83 0,0 ARCO
144 129 130 IPN 140 S 275 0,83 0,0 ARCO
145 130 131 IPN 140 S 275 0,83 0,0 ARCO
146 131 35 IPN 140 S 275 0,83 0,0 ARCO
147 35 132 IPN 140 S 275 0,83 0,0 ARCO
148 132 133 IPN 140 S 275 0,83 0,0 ARCO
149 133 134 IPN 140 S 275 0,83 0,0 ARCO
150 134 10 IPN 140 S 275 0,83 0,0 ARCO
151 135 136 IPN 140 S 275 0,83 0,0 ARCO
152 136 137 IPN 140 S 275 0,83 0,0 ARCO
153 137 138 IPN 140 S 275 0,83 0,0 ARCO
154 138 36 IPN 140 S 275 0,83 0,0 ARCO
155 36 139 IPN 140 S 275 0,83 0,0 ARCO
156 139 140 IPN 140 S 275 0,83 0,0 ARCO
157 140 141 IPN 140 S 275 0,83 0,0 ARCO
158 141 9 IPN 140 S 275 0,83 0,0 ARCO
159 58 142 IPN 140 S 275 0,83 0,0 ARCO
160 142 143 IPN 140 S 275 0,83 0,0 ARCO
161 143 144 IPN 140 S 275 0,83 0,0 ARCO
162 144 37 IPN 140 S 275 0,83 0,0 ARCO
Date : 25/04/15 Page : 7

Length Gamma
(m) (Deg)
163 37 145 IPN 140 S 275 0,83 0,0 ARCO
164 145 146 IPN 140 S 275 0,83 0,0 ARCO
165 146 147 IPN 140 S 275 0,83 0,0 ARCO
166 147 8 IPN 140 S 275 0,83 0,0 ARCO
167 148 149 IPN 140 S 275 0,83 0,0 ARCO
168 149 150 IPN 140 S 275 0,83 0,0 ARCO
169 150 151 IPN 140 S 275 0,83 0,0 ARCO
170 151 38 IPN 140 S 275 0,83 0,0 ARCO
171 38 152 IPN 140 S 275 0,83 0,0 ARCO
172 152 153 IPN 140 S 275 0,83 0,0 ARCO
173 153 154 IPN 140 S 275 0,83 0,0 ARCO
174 154 7 IPN 140 S 275 0,83 0,0 ARCO
175 57 155 IPN 140 S 275 0,83 0,0 ARCO
176 155 156 IPN 140 S 275 0,83 0,0 ARCO
177 156 157 IPN 140 S 275 0,83 0,0 ARCO
178 157 39 IPN 140 S 275 0,83 0,0 ARCO
179 39 158 IPN 140 S 275 0,83 0,0 ARCO
180 158 159 IPN 140 S 275 0,83 0,0 ARCO
181 159 160 IPN 140 S 275 0,83 0,0 ARCO
182 160 6 IPN 140 S 275 0,83 0,0 ARCO
183 161 162 IPN 140 S 275 0,83 0,0 ARCO
184 162 163 IPN 140 S 275 0,83 0,0 ARCO
185 163 164 IPN 140 S 275 0,83 0,0 ARCO
186 164 40 IPN 140 S 275 0,83 0,0 ARCO
187 40 165 IPN 140 S 275 0,83 0,0 ARCO
188 165 166 IPN 140 S 275 0,83 0,0 ARCO
189 166 167 IPN 140 S 275 0,83 0,0 ARCO
190 167 5 IPN 140 S 275 0,83 0,0 ARCO
191 168 169 IPN 140 S 275 0,83 0,0 ARCO
192 169 170 IPN 140 S 275 0,83 0,0 ARCO
193 170 171 IPN 140 S 275 0,83 0,0 ARCO
194 171 41 IPN 140 S 275 0,83 0,0 ARCO
195 41 172 IPN 140 S 275 0,83 0,0 ARCO
196 172 173 IPN 140 S 275 0,83 0,0 ARCO
197 173 174 IPN 140 S 275 0,83 0,0 ARCO
198 174 4 IPN 140 S 275 0,83 0,0 ARCO
199 175 176 IPN 140 S 275 0,83 0,0 ARCO
200 176 177 IPN 140 S 275 0,83 0,0 ARCO
201 177 178 IPN 140 S 275 0,83 0,0 ARCO
202 178 42 IPN 140 S 275 0,83 0,0 ARCO
203 42 179 IPN 140 S 275 0,83 0,0 ARCO
204 179 180 IPN 140 S 275 0,83 0,0 ARCO
205 180 181 IPN 140 S 275 0,83 0,0 ARCO
206 181 3 IPN 140 S 275 0,83 0,0 ARCO
207 182 183 IPN 140 S 275 0,83 0,0 ARCO
208 183 184 IPN 140 S 275 0,83 0,0 ARCO
209 184 185 IPN 140 S 275 0,83 0,0 ARCO
210 185 43 IPN 140 S 275 0,83 0,0 ARCO
Date : 25/04/15 Page : 8

Length Gamma
(m) (Deg)
211 43 186 IPN 140 S 275 0,83 0,0 ARCO
212 186 187 IPN 140 S 275 0,83 0,0 ARCO
213 187 188 IPN 140 S 275 0,83 0,0 ARCO
214 188 2 IPN 140 S 275 0,83 0,0 ARCO
215 54 189 IPN 140 S 275 0,83 0,0 ARCO
216 189 190 IPN 140 S 275 0,83 0,0 ARCO
217 190 191 IPN 140 S 275 0,83 0,0 ARCO
218 191 44 IPN 140 S 275 0,83 0,0 ARCO
219 44 192 IPN 140 S 275 0,83 0,0 ARCO
220 192 193 IPN 140 S 275 0,83 0,0 ARCO
221 193 194 IPN 140 S 275 0,83 0,0 ARCO
222 194 1 IPN 140 S 275 0,83 0,0 ARCO
223 195 196 IPN 140 S 275 0,83 0,0 ARCO
224 196 197 IPN 140 S 275 0,83 0,0 ARCO
225 197 198 IPN 140 S 275 0,83 0,0 ARCO
226 198 45 IPN 140 S 275 0,83 0,0 ARCO
227 45 199 IPN 140 S 275 0,83 0,0 ARCO
228 199 200 IPN 140 S 275 0,83 0,0 ARCO
229 200 201 IPN 140 S 275 0,83 0,0 ARCO
230 201 26 IPN 140 S 275 0,83 0,0 ARCO
231 53 202 IPN 140 S 275 0,83 0,0 ARCO
232 202 203 IPN 140 S 275 0,83 0,0 ARCO
233 203 204 IPN 140 S 275 0,83 0,0 ARCO
234 204 46 IPN 140 S 275 0,83 0,0 ARCO
235 46 205 IPN 140 S 275 0,83 0,0 ARCO
236 205 206 IPN 140 S 275 0,83 0,0 ARCO
237 206 207 IPN 140 S 275 0,83 0,0 ARCO
238 207 25 IPN 140 S 275 0,83 0,0 ARCO
239 208 209 IPN 140 S 275 0,83 0,0 ARCO
240 209 210 IPN 140 S 275 0,83 0,0 ARCO
241 210 211 IPN 140 S 275 0,83 0,0 ARCO
242 211 47 IPN 140 S 275 0,83 0,0 ARCO
243 47 212 IPN 140 S 275 0,83 0,0 ARCO
244 212 213 IPN 140 S 275 0,83 0,0 ARCO
245 213 214 IPN 140 S 275 0,83 0,0 ARCO
246 214 24 IPN 140 S 275 0,83 0,0 ARCO
247 215 216 IPN 140 S 275 0,83 0,0 ARCO
248 216 217 IPN 140 S 275 0,83 0,0 ARCO
249 217 218 IPN 140 S 275 0,83 0,0 ARCO
250 218 48 IPN 140 S 275 0,83 0,0 ARCO
251 48 219 IPN 140 S 275 0,83 0,0 ARCO
252 219 220 IPN 140 S 275 0,83 0,0 ARCO
253 220 221 IPN 140 S 275 0,83 0,0 ARCO
254 221 23 IPN 140 S 275 0,83 0,0 ARCO
255 222 223 IPN 140 S 275 0,83 0,0 ARCO
256 223 224 IPN 140 S 275 0,83 0,0 ARCO
257 224 225 IPN 140 S 275 0,83 0,0 ARCO
258 225 49 IPN 140 S 275 0,83 0,0 ARCO
Date : 25/04/15 Page : 9

Length Gamma
(m) (Deg)
259 49 226 IPN 140 S 275 0,83 0,0 ARCO
260 226 227 IPN 140 S 275 0,83 0,0 ARCO
261 227 228 IPN 140 S 275 0,83 0,0 ARCO
262 228 22 IPN 140 S 275 0,83 0,0 ARCO
263 59 229 IPN 140 S 275 0,83 0,0 ARCO
264 229 230 IPN 140 S 275 0,83 0,0 ARCO
265 230 231 IPN 140 S 275 0,83 0,0 ARCO
266 231 50 IPN 140 S 275 0,83 0,0 ARCO
267 50 232 IPN 140 S 275 0,83 0,0 ARCO
268 232 233 IPN 140 S 275 0,83 0,0 ARCO
269 233 234 IPN 140 S 275 0,83 0,0 ARCO
270 234 21 IPN 140 S 275 0,83 0,0 ARCO
Data - Sections
Section name Bar list AX (cm2) AY (cm2) AZ (cm2) IX (cm4) IY (cm4) IZ (cm4)
CAE 70x7 53A60 9,40 4,90 4,90 1,52 42,30 42,30
IPN 140 27A52 61A270 18,24 11,16 7,74 4,40 572,14 35,18
PERF_U_140 1A26 44,40 27,60 16,80 20,01 1871,89 583,17
Data - Materials
Material E (MPa) G (MPa) NI LX (1/°C) RO (kN/m3) Re (MPa)

1 ACERO 210000,00 81000,00 0,30 0,00 77,01 235,00
2 S 275 210000,00 81000,00 0,30 0,00 77,01 275,00
3 N/A N/A N/A N/A N/A N/A N/A
Data - Supports
Support name List of nodes List of edges List of objects Support conditions
53A61 74A102CA7 115 128 135 148 161A182CA7
Rotula UX UY UZ
195 208 215 222
Date : 25/04/15 Page : 10

Loads - Cases
Case Label Case name

1 PERM1 PERM1
2 PERM2 PERM2
3 EXPL1 EXPL1
4 ELU
5 ELU+
6 ELU-
7 ELS
8 ELS+
9 ELS-
10 ELS:CHR
11 ELS:CHR+
12 ELS:CHR-
13 ELS:FRE
14 ELS:FRE+
15 ELS:FRE-
16 ELS:QPR
17 ELS:QPR+
18 ELS:QPR-
19 ACC
20 ACC+
21 ACC-
22 MOD22 Modal Ecc X+
23 SIS_X23 Sísmico - NCh 433.Of96 - horizontal Ecc X+ Dirección_X
24 SIS_Y24 Sísmico - NCh 433.Of96 - horizontal Ecc X+ Dirección_Y
25 SIS_Z24 Sísmico - NCh 433.Of96 - horizontal Ecc X+ Dirección_Z
26 MOD26 Modal Ecc Y+
27 SIS_X27 Sísmico - NCh 433.Of96 - horizontal Ecc Y+ Dirección_X
28 SIS_Y28 Sísmico - NCh 433.Of96 - horizontal Ecc Y+ Dirección_Y
29 SIS_Z28 Sísmico - NCh 433.Of96 - horizontal Ecc Y+ Dirección_Z
30 ACC:SEI
31 ACC:SEI+
32 ACC:SEI-
33 FIRE
34 FIRE+
35 FIRE-
Case Nature Analysis type
1 Estructural Estático lineal
2 Estructural Estático lineal
3 Categoría A Estático lineal
4 Estático lineal
5 Estático lineal
6 Estático lineal
7 Estático lineal
Date : 25/04/15 Page : 11

Case Nature Analysis type

8 Estático lineal
9 Estático lineal
10 Estático lineal
11 Estático lineal
12 Estático lineal
13 Estático lineal
14 Estático lineal
15 Estático lineal
16 Estático lineal
17 Estático lineal
18 Estático lineal
19 Estático lineal
20 Estático lineal
21 Estático lineal
22 Modal
23 sísmica Sísmico - NCh 433.Of96
26 Modal
30 Sísmico - NCh 433.Of96
Loads - Values
Case Load type List Load values

1 self-weight 1A270 PZ Negative Factor=1,00
2 uniform load 61 62 PZ=-0,57(kN/m)
2 uniform load 63A229 231A270 PZ=-0,57(kN/m)
3 uniform load 61 62 PZ=-2,21(kN/m)
3 (FE) uniform PZ=-2,15(kN/m2)
3 uniform load 63A270 PZ=-2,21(kN/m)
Combinations
Date : 25/04/15 Page : 12

Combi-
Combinations Name Analysis type nation Case nature
type
Combinations Definition
Displacements SLS: global extremes
UX (cm) UY (cm) UZ (cm) RX (Rad) RY (Rad) RZ (Rad)
MAX 0,6 0,5 0,6 0,020 0,020 0,007

Node 63 210 125 208 61 224
Case 23 28 23 28 23 28
Mode SRSS SRSS SRSS SRSS SRSS SRSS
MIN -0,0 -0,1 -0,3 -0,002 -0,002 -0,001

Node 117 151 72 55 58 57
Case ELS/1 ELS/1 ELS/1 1 ELS/1 1
Mode
Stresses - Global extremes
S max (MPa) S min (MPa) S max(My) (MPa)
MAX 97,65 38,78 23,01

Bar 242 199 246
Node 47 175 24
Case ACC/10 ELU/1 ACC/1
Mode
MIN -26,58 -81,95 -1,02

Bar 59 242 60
Node 59 47 60
Case ACC/15 28 ACC/14
Mode CQC
S max(Mz) (MPa) S min(My) (MPa) S min(Mz) (MPa) Fx/Ax (MPa)
Date : 25/04/15 Page : 13

S max(Mz) (MPa) S min(My) (MPa) S min(Mz) (MPa) Fx/Ax (MPa)

MAX 80,62 2,41 3,28 47,22
Bar 242 53 60 1
Node 47 45 51 1
Case ACC/10 28 ACC/2 ELU/1
Mode CQC
MIN -0,31 -23,01 -80,62 -32,52

Bar 60 246 242 60
Node 51 24 47 51
Case 3 ACC/1 ACC/10 ACC/15
Mode
Stories - Displacements
Case/Story UX (cm) UY (cm) dr UX (cm) dr UY (cm) d UX

Case/Story d UY Max UX (cm) Max UY (cm) Min UX (cm) Min UY (cm)
Date : 25/04/15 Page : 14

View - Deformation; casos: 7 (ELS) Component 3/6
Members - Definition
Member Name Components Code group

1 1 ANILLO
2 2 ANILLO
3 3 ANILLO
4 4 ANILLO
5 5 ANILLO
6 6 ANILLO
7 7 ANILLO
8 8 ANILLO
9 9 ANILLO
10 10 ANILLO
11 11 ANILLO
12 12 ANILLO
13 13 ANILLO
14 14 ANILLO
15 15 ANILLO
16 16 ANILLO
17 17 ANILLO
18 18 ANILLO
19 19 ANILLO
20 20 ANILLO
21 21 ANILLO
22 22 ANILLO
23 23 ANILLO
24 24 ANILLO
Date : 25/04/15 Page : 15


25 25 ANILLO
26 26 ANILLO
27 27 ARRIOSTRADOS
28 28 ARRIOSTRADOS
29 29 ARRIOSTRADOS
30 30 ARRIOSTRADOS
31 31 ARRIOSTRADOS
32 32 ARRIOSTRADOS
33 33 ARRIOSTRADOS
34 34 ARRIOSTRADOS
35 35 ARRIOSTRADOS
36 36 ARRIOSTRADOS
37 37 ARRIOSTRADOS
38 38 ARRIOSTRADOS
39 39 ARRIOSTRADOS
40 40 ARRIOSTRADOS
41 41 ARRIOSTRADOS
42 42 ARRIOSTRADOS
43 43 ARRIOSTRADOS
44 44 ARRIOSTRADOS
45 45 ARRIOSTRADOS
46 46 ARRIOSTRADOS
47 47 ARRIOSTRADOS
48 48 ARRIOSTRADOS
49 49 ARRIOSTRADOS
50 50 ARRIOSTRADOS
51 51 ARRIOSTRADOS
52 52 ARRIOSTRADOS
53 53 TIRANTES
54 54 TIRANTES
55 55 TIRANTES
56 56 TIRANTES
57 57 TIRANTES
58 58 TIRANTES
59 59 TIRANTES
60 60 TIRANTES
61 61 VIGAS
62 62 VIGAS
63 63 ARCO
64 64 ARCO
65 65 ARCO
66 66 ARCO
67 67 ARCO
68 68 ARCO
69 69 ARCO
70 70 ARCO
71 71 ARCO
72 72 ARCO
73 73 ARCO
Date : 25/04/15 Page : 16


74 74 ARCO
75 75 ARCO
76 76 ARCO
77 77 ARCO
78 78 ARCO
79 79 ARCO
80 80 ARCO
81 81 ARCO
82 82 ARCO
83 83 ARCO
84 84 ARCO
85 85 ARCO
86 86 ARCO
87 87 ARCO
88 88 ARCO
89 89 ARCO
90 90 ARCO
91 91 ARCO
92 92 ARCO
93 93 ARCO
94 94 ARCO
95 95 ARCO
96 96 ARCO
97 97 ARCO
98 98 ARCO
99 99 ARCO
100 100 ARCO
101 101 ARCO
102 102 ARCO
103 103 ARCO
104 104 ARCO
105 105 ARCO
106 106 ARCO
107 107 ARCO
108 108 ARCO
109 109 ARCO
110 110 ARCO
111 111 ARCO
112 112 ARCO
113 113 ARCO
114 114 ARCO
115 115 ARCO
116 116 ARCO
117 117 ARCO
118 118 ARCO
119 119 ARCO
120 120 ARCO
121 121 ARCO
122 122 ARCO
Date : 25/04/15 Page : 17


123 123 ARCO
124 124 ARCO
125 125 ARCO
126 126 ARCO
127 127 ARCO
128 128 ARCO
129 129 ARCO
130 130 ARCO
131 131 ARCO
132 132 ARCO
133 133 ARCO
134 134 ARCO
135 135 ARCO
136 136 ARCO
137 137 ARCO
138 138 ARCO
139 139 ARCO
140 140 ARCO
141 141 ARCO
142 142 ARCO
143 143 ARCO
144 144 ARCO
145 145 ARCO
146 146 ARCO
147 147 ARCO
148 148 ARCO
149 149 ARCO
150 150 ARCO
151 151 ARCO
152 152 ARCO
153 153 ARCO
154 154 ARCO
155 155 ARCO
156 156 ARCO
157 157 ARCO
158 158 ARCO
159 159 ARCO
160 160 ARCO
161 161 ARCO
162 162 ARCO
163 163 ARCO
164 164 ARCO
165 165 ARCO
166 166 ARCO
167 167 ARCO
168 168 ARCO
169 169 ARCO
170 170 ARCO
171 171 ARCO
Date : 25/04/15 Page : 18


172 172 ARCO
173 173 ARCO
174 174 ARCO
175 175 ARCO
176 176 ARCO
177 177 ARCO
178 178 ARCO
179 179 ARCO
180 180 ARCO
181 181 ARCO
182 182 ARCO
183 183 ARCO
184 184 ARCO
185 185 ARCO
186 186 ARCO
187 187 ARCO
188 188 ARCO
189 189 ARCO
190 190 ARCO
191 191 ARCO
192 192 ARCO
193 193 ARCO
194 194 ARCO
195 195 ARCO
196 196 ARCO
197 197 ARCO
198 198 ARCO
199 199 ARCO
200 200 ARCO
201 201 ARCO
202 202 ARCO
203 203 ARCO
204 204 ARCO
205 205 ARCO
206 206 ARCO
207 207 ARCO
208 208 ARCO
209 209 ARCO
210 210 ARCO
211 211 ARCO
212 212 ARCO
213 213 ARCO
214 214 ARCO
215 215 ARCO
216 216 ARCO
217 217 ARCO
218 218 ARCO
219 219 ARCO
220 220 ARCO
Date : 25/04/15 Page : 19


221 221 ARCO
222 222 ARCO
223 223 ARCO
224 224 ARCO
225 225 ARCO
226 226 ARCO
227 227 ARCO
228 228 ARCO
229 229 ARCO
230 230 ARCO
231 231 ARCO
232 232 ARCO
233 233 ARCO
234 234 ARCO
235 235 ARCO
236 236 ARCO
237 237 ARCO
238 238 ARCO
239 239 ARCO
240 240 ARCO
241 241 ARCO
242 242 ARCO
243 243 ARCO
244 244 ARCO
245 245 ARCO
246 246 ARCO
247 247 ARCO
248 248 ARCO
249 249 ARCO
250 250 ARCO
251 251 ARCO
252 252 ARCO
253 253 ARCO
254 254 ARCO
255 255 ARCO
256 256 ARCO
257 257 ARCO
258 258 ARCO
259 259 ARCO
260 260 ARCO
261 261 ARCO
262 262 ARCO
263 263 ARCO
264 264 ARCO
265 265 ARCO
266 266 ARCO
267 267 ARCO
268 268 ARCO
269 269 ARCO
Date : 25/04/15 Page : 20


270 270 ARCO
Member Section Type Ly (m) Lz (m)
1 PERF_U_140 ANILLO 0,27 0,27
2 PERF_U_140 ANILLO 0,26 0,26
3 PERF_U_140 ANILLO 0,27 0,27
4 PERF_U_140 ANILLO 0,27 0,27
5 PERF_U_140 ANILLO 0,27 0,27
6 PERF_U_140 ANILLO 0,26 0,26
7 PERF_U_140 ANILLO 0,27 0,27
8 PERF_U_140 ANILLO 0,27 0,27
9 PERF_U_140 ANILLO 0,27 0,27
10 PERF_U_140 ANILLO 0,26 0,26
11 PERF_U_140 ANILLO 0,27 0,27
12 PERF_U_140 ANILLO 0,27 0,27
13 PERF_U_140 ANILLO 0,27 0,27
14 PERF_U_140 ANILLO 0,27 0,27
15 PERF_U_140 ANILLO 0,26 0,26
16 PERF_U_140 ANILLO 0,27 0,27
17 PERF_U_140 ANILLO 0,27 0,27
18 PERF_U_140 ANILLO 0,27 0,27
19 PERF_U_140 ANILLO 0,26 0,26
20 PERF_U_140 ANILLO 0,27 0,27
21 PERF_U_140 ANILLO 0,27 0,27
22 PERF_U_140 ANILLO 0,27 0,27
23 PERF_U_140 ANILLO 0,26 0,26
24 PERF_U_140 ANILLO 0,27 0,27
25 PERF_U_140 ANILLO 0,27 0,27
26 PERF_U_140 ANILLO 0,27 0,27
27 IPN 140 ARRIOSTRADOS 1,05 1,05
Date : 25/04/15 Page : 21


53 CAE 70x7 TIRANTES 3,59 3,59
61 IPN 140 VIGAS 1,95 1,95
62 IPN 140 VIGAS 1,95 1,95
63 IPN 140 ARCO 0,83 0,83
64 IPN 140 ARCO 0,83 0,83
65 IPN 140 ARCO 0,83 0,83
66 IPN 140 ARCO 0,83 0,83
67 IPN 140 ARCO 0,83 0,83
68 IPN 140 ARCO 0,83 0,83
69 IPN 140 ARCO 0,83 0,83
70 IPN 140 ARCO 0,83 0,83
71 IPN 140 ARCO 0,83 0,83
72 IPN 140 ARCO 0,83 0,83
73 IPN 140 ARCO 0,83 0,83
74 IPN 140 ARCO 0,83 0,83
75 IPN 140 ARCO 0,83 0,83
76 IPN 140 ARCO 0,83 0,83
77 IPN 140 ARCO 0,83 0,83
78 IPN 140 ARCO 0,83 0,83
79 IPN 140 ARCO 0,83 0,83
80 IPN 140 ARCO 0,83 0,83
81 IPN 140 ARCO 0,83 0,83
82 IPN 140 ARCO 0,83 0,83
83 IPN 140 ARCO 0,83 0,83
84 IPN 140 ARCO 0,83 0,83
85 IPN 140 ARCO 0,83 0,83
86 IPN 140 ARCO 0,83 0,83
87 IPN 140 ARCO 0,83 0,83
88 IPN 140 ARCO 0,83 0,83
89 IPN 140 ARCO 0,83 0,83
90 IPN 140 ARCO 0,83 0,83
91 IPN 140 ARCO 0,83 0,83
92 IPN 140 ARCO 0,83 0,83
93 IPN 140 ARCO 0,83 0,83
94 IPN 140 ARCO 0,83 0,83
95 IPN 140 ARCO 0,83 0,83
96 IPN 140 ARCO 0,83 0,83
Date : 25/04/15 Page : 22


97 IPN 140 ARCO 0,83 0,83
98 IPN 140 ARCO 0,83 0,83
99 IPN 140 ARCO 0,83 0,83
100 IPN 140 ARCO 0,83 0,83
101 IPN 140 ARCO 0,83 0,83
102 IPN 140 ARCO 0,83 0,83
103 IPN 140 ARCO 0,83 0,83
104 IPN 140 ARCO 0,83 0,83
105 IPN 140 ARCO 0,83 0,83
106 IPN 140 ARCO 0,83 0,83
107 IPN 140 ARCO 0,83 0,83
108 IPN 140 ARCO 0,83 0,83
109 IPN 140 ARCO 0,83 0,83
110 IPN 140 ARCO 0,83 0,83
111 IPN 140 ARCO 0,83 0,83
112 IPN 140 ARCO 0,83 0,83
113 IPN 140 ARCO 0,83 0,83
114 IPN 140 ARCO 0,83 0,83
115 IPN 140 ARCO 0,83 0,83
116 IPN 140 ARCO 0,83 0,83
117 IPN 140 ARCO 0,83 0,83
118 IPN 140 ARCO 0,83 0,83
119 IPN 140 ARCO 0,83 0,83
120 IPN 140 ARCO 0,83 0,83
121 IPN 140 ARCO 0,83 0,83
122 IPN 140 ARCO 0,83 0,83
123 IPN 140 ARCO 0,83 0,83
124 IPN 140 ARCO 0,83 0,83
125 IPN 140 ARCO 0,83 0,83
126 IPN 140 ARCO 0,83 0,83
127 IPN 140 ARCO 0,83 0,83
128 IPN 140 ARCO 0,83 0,83
129 IPN 140 ARCO 0,83 0,83
130 IPN 140 ARCO 0,83 0,83
131 IPN 140 ARCO 0,83 0,83
132 IPN 140 ARCO 0,83 0,83
133 IPN 140 ARCO 0,83 0,83
134 IPN 140 ARCO 0,83 0,83
135 IPN 140 ARCO 0,83 0,83
136 IPN 140 ARCO 0,83 0,83
137 IPN 140 ARCO 0,83 0,83
138 IPN 140 ARCO 0,83 0,83
139 IPN 140 ARCO 0,83 0,83
140 IPN 140 ARCO 0,83 0,83
141 IPN 140 ARCO 0,83 0,83
142 IPN 140 ARCO 0,83 0,83
143 IPN 140 ARCO 0,83 0,83
144 IPN 140 ARCO 0,83 0,83
145 IPN 140 ARCO 0,83 0,83
Date : 25/04/15 Page : 23


146 IPN 140 ARCO 0,83 0,83
147 IPN 140 ARCO 0,83 0,83
148 IPN 140 ARCO 0,83 0,83
149 IPN 140 ARCO 0,83 0,83
150 IPN 140 ARCO 0,83 0,83
151 IPN 140 ARCO 0,83 0,83
152 IPN 140 ARCO 0,83 0,83
153 IPN 140 ARCO 0,83 0,83
154 IPN 140 ARCO 0,83 0,83
155 IPN 140 ARCO 0,83 0,83
156 IPN 140 ARCO 0,83 0,83
157 IPN 140 ARCO 0,83 0,83
158 IPN 140 ARCO 0,83 0,83
159 IPN 140 ARCO 0,83 0,83
160 IPN 140 ARCO 0,83 0,83
161 IPN 140 ARCO 0,83 0,83
162 IPN 140 ARCO 0,83 0,83
163 IPN 140 ARCO 0,83 0,83
164 IPN 140 ARCO 0,83 0,83
165 IPN 140 ARCO 0,83 0,83
166 IPN 140 ARCO 0,83 0,83
167 IPN 140 ARCO 0,83 0,83
168 IPN 140 ARCO 0,83 0,83
169 IPN 140 ARCO 0,83 0,83
170 IPN 140 ARCO 0,83 0,83
171 IPN 140 ARCO 0,83 0,83
172 IPN 140 ARCO 0,83 0,83
173 IPN 140 ARCO 0,83 0,83
174 IPN 140 ARCO 0,83 0,83
175 IPN 140 ARCO 0,83 0,83
176 IPN 140 ARCO 0,83 0,83
177 IPN 140 ARCO 0,83 0,83
178 IPN 140 ARCO 0,83 0,83
179 IPN 140 ARCO 0,83 0,83
180 IPN 140 ARCO 0,83 0,83
181 IPN 140 ARCO 0,83 0,83
182 IPN 140 ARCO 0,83 0,83
183 IPN 140 ARCO 0,83 0,83
184 IPN 140 ARCO 0,83 0,83
185 IPN 140 ARCO 0,83 0,83
186 IPN 140 ARCO 0,83 0,83
187 IPN 140 ARCO 0,83 0,83
188 IPN 140 ARCO 0,83 0,83
189 IPN 140 ARCO 0,83 0,83
190 IPN 140 ARCO 0,83 0,83
191 IPN 140 ARCO 0,83 0,83
192 IPN 140 ARCO 0,83 0,83
193 IPN 140 ARCO 0,83 0,83
194 IPN 140 ARCO 0,83 0,83
Date : 25/04/15 Page : 24


195 IPN 140 ARCO 0,83 0,83
196 IPN 140 ARCO 0,83 0,83
197 IPN 140 ARCO 0,83 0,83
198 IPN 140 ARCO 0,83 0,83
199 IPN 140 ARCO 0,83 0,83
200 IPN 140 ARCO 0,83 0,83
201 IPN 140 ARCO 0,83 0,83
202 IPN 140 ARCO 0,83 0,83
203 IPN 140 ARCO 0,83 0,83
204 IPN 140 ARCO 0,83 0,83
205 IPN 140 ARCO 0,83 0,83
206 IPN 140 ARCO 0,83 0,83
207 IPN 140 ARCO 0,83 0,83
208 IPN 140 ARCO 0,83 0,83
209 IPN 140 ARCO 0,83 0,83
210 IPN 140 ARCO 0,83 0,83
211 IPN 140 ARCO 0,83 0,83
212 IPN 140 ARCO 0,83 0,83
213 IPN 140 ARCO 0,83 0,83
214 IPN 140 ARCO 0,83 0,83
215 IPN 140 ARCO 0,83 0,83
216 IPN 140 ARCO 0,83 0,83
217 IPN 140 ARCO 0,83 0,83
218 IPN 140 ARCO 0,83 0,83
219 IPN 140 ARCO 0,83 0,83
220 IPN 140 ARCO 0,83 0,83
221 IPN 140 ARCO 0,83 0,83
222 IPN 140 ARCO 0,83 0,83
223 IPN 140 ARCO 0,83 0,83
224 IPN 140 ARCO 0,83 0,83
225 IPN 140 ARCO 0,83 0,83
226 IPN 140 ARCO 0,83 0,83
227 IPN 140 ARCO 0,83 0,83
228 IPN 140 ARCO 0,83 0,83
229 IPN 140 ARCO 0,83 0,83
230 IPN 140 ARCO 0,83 0,83
231 IPN 140 ARCO 0,83 0,83
232 IPN 140 ARCO 0,83 0,83
233 IPN 140 ARCO 0,83 0,83
234 IPN 140 ARCO 0,83 0,83
235 IPN 140 ARCO 0,83 0,83
236 IPN 140 ARCO 0,83 0,83
237 IPN 140 ARCO 0,83 0,83
238 IPN 140 ARCO 0,83 0,83
239 IPN 140 ARCO 0,83 0,83
240 IPN 140 ARCO 0,83 0,83
241 IPN 140 ARCO 0,83 0,83
242 IPN 140 ARCO 0,83 0,83
243 IPN 140 ARCO 0,83 0,83
Date : 25/04/15 Page : 25


244 IPN 140 ARCO 0,83 0,83
245 IPN 140 ARCO 0,83 0,83
246 IPN 140 ARCO 0,83 0,83
247 IPN 140 ARCO 0,83 0,83
248 IPN 140 ARCO 0,83 0,83
249 IPN 140 ARCO 0,83 0,83
250 IPN 140 ARCO 0,83 0,83
251 IPN 140 ARCO 0,83 0,83
252 IPN 140 ARCO 0,83 0,83
253 IPN 140 ARCO 0,83 0,83
254 IPN 140 ARCO 0,83 0,83
255 IPN 140 ARCO 0,83 0,83
256 IPN 140 ARCO 0,83 0,83
257 IPN 140 ARCO 0,83 0,83
258 IPN 140 ARCO 0,83 0,83
259 IPN 140 ARCO 0,83 0,83
260 IPN 140 ARCO 0,83 0,83
261 IPN 140 ARCO 0,83 0,83
262 IPN 140 ARCO 0,83 0,83
263 IPN 140 ARCO 0,83 0,83
264 IPN 140 ARCO 0,83 0,83
265 IPN 140 ARCO 0,83 0,83
266 IPN 140 ARCO 0,83 0,83
267 IPN 140 ARCO 0,83 0,83
268 IPN 140 ARCO 0,83 0,83
269 IPN 140 ARCO 0,83 0,83
270 IPN 140 ARCO 0,83 0,83
Code groups - Definition
Code
Name Components
group
1 ARCO 63A270
2 VIGAS 61 62
3 TIRANTES 53A60
ARRIOSTRA-
4 27A52
DOS
5 ANILLO 1A26
Member Verification
Date : 25/04/15 Page : 26

STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
CODE: UNE-EN 1993-1:2008/AC:2009, Eurocode 3: Design of steel structures.
ANALYSIS TYPE: Member Verification
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
MEMBER: 1 POINT: 3 COORDINATE: x = 1.00 L = 0.27 m
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
Governing Load Case: 4 ELU /1/ 1*1.35 + 2*1.35 + 3*1.50
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------
SECTION PARAMETERS: PERF_U_140

h=16.4 cm gM0=1.00 gM1=1.00
b=11.5 cm Ay=28.75 cm2 Az=19.68 cm2 Ax=44.40 cm2
tw=1.2 cm Iy=1871.89 cm4 Iz=583.17 cm4 Ix=20.01 cm4
tf=1.2 cm Wply=268.56 cm3 Wplz=136.47 cm3
----------------------------------------------------------------------------------------------------------------------------------------
INTERNAL FORCES AND CAPACITIES:
N,Ed = 209.66 kN My,Ed = -2.69 kN*m Mz,Ed = 1.35 kN*m Vy,Ed = -2.54 kN
Nc,Rd = 1221.00 kN My,Ed,max = -3.14 kN*m Mz,Ed,max = 1.35 kN*m Vy,T,Rd = 454.14 kN
Nb,Rd = 1221.00 kN My,c,Rd = 73.85 kN*m Mz,c,Rd = 37.53 kN*m Vz,Ed = 1.62 kN
MN,y,Rd = 71.68 kN*m MN,z,Rd = 36.42 kN*m Vz,T,Rd = 310.85 kN
Tt,Ed = -0.04 kN*m
Class of section = 2
----------------------------------------------------------------------------------------------------------------------------------------
LATERAL BUCKLING PARAMETERS:

----------------------------------------------------------------------------------------------------------------------------------------
BUCKLING PARAMETERS:
About y axis: About z axis:

Ly = 0.27 m Lam_y = 0.05 Lz = 0.27 m Lam_z = 0.08
Lcr,y = 0.27 m Xy = 1.00 Lcr,z = 0.27 m Xz = 1.00
Lamy = 4.08 kyy = 0.95 Lamz = 7.32 kyz = 0.58
----------------------------------------------------------------------------------------------------------------------------------------
VERIFICATION FORMULAS:
Section strength check:
N,Ed/Nc,Rd = 0.17 < 1.00 (6.2.4.(1))
(My,Ed/MN,y,Rd)^ 1.00 + (Mz,Ed/MN,z,Rd)^1.00 = 0.07 < 1.00 (6.2.9.1.(6))
Vy,Ed/Vy,T,Rd = 0.01 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
Tau,ty,Ed/(fy/(sqrt(3)*gM0)) = 0.01 < 1.00 (6.2.6)
Tau,tz,Ed/(fy/(sqrt(3)*gM0)) = 0.01 < 1.00 (6.2.6)
Global stability check of member:
Lambda,y = 4.08 < Lambda,max = 210.00 Lambda,z = 7.32 < Lambda,max = 210.00 STABLE
N,Ed/(Xy*N,Rk/gM1) + kyy*My,Ed,max/(XLT*My,Rk/gM1) + kyz*Mz,Ed,max/(Mz,Rk/gM1) = 0.23 < 1.00
(6.3.3.(4))
N,Ed/(Xz*N,Rk/gM1) + kzy*My,Ed,max/(XLT*My,Rk/gM1) + kzz*Mz,Ed,max/(Mz,Rk/gM1) = 0.22 < 1.00 (6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
Date : 25/04/15 Page : 27

STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=16.4 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed = 206.28 kN My,Ed = -2.04 kN*m Mz,Ed = 1.39 kN*m Vy,Ed = 4.02 kN
Nb,Rd = 1221.00 kN My,c,Rd = 73.85 kN*m Mz,c,Rd = 37.53 kN*m Vz,Ed = -2.26 kN
Tt,Ed = 0.05 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.26 m Lam_y = 0.05 Lz = 0.26 m Lam_z = 0.08
Lcr,y = 0.26 m Xy = 1.00 Lcr,z = 0.26 m Xz = 1.00
Lamy = 4.08 kyy = 0.95 Lamz = 7.31 kyz = 0.58
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.17 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.01 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
Date : 25/04/15 Page : 28
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=16.4 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed = 205.49 kN My,Ed = -3.06 kN*m Mz,Ed = -0.24 kN*m Vy,Ed = 2.24 kN
Tt,Ed = 0.01 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.27 m Lam_y = 0.05 Lz = 0.27 m Lam_z = 0.08
Lcr,y = 0.27 m Xy = 1.00 Lcr,z = 0.27 m Xz = 1.00
Lamy = 4.08 kyy = 0.95 Lamz = 7.31 kyz = 0.58
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.17 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 29
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=16.4 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Nc,Rd = 1221.00 kN My,Ed,max = -3.30 kN*m Mz,Ed,max = -0.49 kN*m Vy,T,Rd = 456.09 kN
Tt,Ed = 0.01 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.27 m Lam_y = 0.05 Lz = 0.27 m Lam_z = 0.08
Lcr,y = 0.27 m Xy = 1.00 Lcr,z = 0.27 m Xz = 1.00
Lamy = 4.08 kyy = 0.95 Lamz = 7.31 kyz = 0.58
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.17 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.00 < 1.00 (6.2.6-7)
(6.3.3.(4))
Date : 25/04/15 Page : 30
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=16.4 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.27 m Lam_y = 0.05 Lz = 0.27 m Lam_z = 0.08
Lcr,y = 0.27 m Xy = 1.00 Lcr,z = 0.27 m Xz = 1.00
Lamy = 4.08 kyy = 0.95 Lamz = 7.32 kyz = 0.58
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.17 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.00 < 1.00 (6.2.6-7)
(6.3.3.(4))
Date : 25/04/15 Page : 31

----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=16.4 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.05 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.26 m Lam_y = 0.05 Lz = 0.26 m Lam_z = 0.08
Lcr,y = 0.26 m Xy = 1.00 Lcr,z = 0.26 m Xz = 1.00
Lamy = 4.08 kyy = 0.95 Lamz = 7.31 kyz = 0.58
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.17 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.01 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.00 < 1.00 (6.2.6-7)
Date : 25/04/15 Page : 32
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=16.4 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed = 204.24 kN My,Ed = -3.62 kN*m Mz,Ed = -1.84 kN*m Vy,Ed = -4.84 kN
Tt,Ed = 0.04 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.27 m Lam_y = 0.05 Lz = 0.27 m Lam_z = 0.08
Lcr,y = 0.27 m Xy = 1.00 Lcr,z = 0.27 m Xz = 1.00
Lamy = 4.08 kyy = 0.95 Lamz = 7.32 kyz = 0.58
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.17 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.01 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.00 < 1.00 (6.2.6-7)
Date : 25/04/15 Page : 33

(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=16.4 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.27 m Lam_y = 0.05 Lz = 0.27 m Lam_z = 0.08
Lcr,y = 0.27 m Xy = 1.00 Lcr,z = 0.27 m Xz = 1.00
Lamy = 4.08 kyy = 0.95 Lamz = 7.31 kyz = 0.58
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.17 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.00 < 1.00 (6.2.6-7)
Date : 25/04/15 Page : 34
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=16.4 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.01 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.27 m Lam_y = 0.05 Lz = 0.27 m Lam_z = 0.08
Lcr,y = 0.27 m Xy = 1.00 Lcr,z = 0.27 m Xz = 1.00
Lamy = 4.08 kyy = 0.95 Lamz = 7.31 kyz = 0.58
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.17 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
Date : 25/04/15 Page : 35

(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=16.4 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.05 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.26 m Lam_y = 0.05 Lz = 0.26 m Lam_z = 0.08
Lcr,y = 0.26 m Xy = 1.00 Lcr,z = 0.26 m Xz = 1.00
Lamy = 4.08 kyy = 0.95 Lamz = 7.31 kyz = 0.58
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.17 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.01 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
Date : 25/04/15 Page : 36

(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=16.4 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.01 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.27 m Lam_y = 0.05 Lz = 0.27 m Lam_z = 0.08
Lcr,y = 0.27 m Xy = 1.00 Lcr,z = 0.27 m Xz = 1.00
Lamy = 4.08 kyy = 0.95 Lamz = 7.32 kyz = 0.58
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.17 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.01 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
Date : 25/04/15 Page : 37

(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=16.4 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.05 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.27 m Lam_y = 0.05 Lz = 0.27 m Lam_z = 0.08
Lcr,y = 0.27 m Xy = 1.00 Lcr,z = 0.27 m Xz = 1.00
Lamy = 4.08 kyy = 0.95 Lamz = 7.31 kyz = 0.58
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.17 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.01 < 1.00 (6.2.6-7)
Date : 25/04/15 Page : 38
Vz,Ed/Vz,T,Rd = 0.00 < 1.00 (6.2.6-7)

(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=16.4 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.27 m Lam_y = 0.05 Lz = 0.27 m Lam_z = 0.08
Lcr,y = 0.27 m Xy = 1.00 Lcr,z = 0.27 m Xz = 1.00
Lamy = 4.08 kyy = 0.95 Lamz = 7.31 kyz = 0.58
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.17 < 1.00 (6.2.4.(1))
Date : 25/04/15 Page : 39
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)

Vz,Ed/Vz,T,Rd = 0.00 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=16.4 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.04 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.27 m Lam_y = 0.05 Lz = 0.27 m Lam_z = 0.08
Lcr,y = 0.27 m Xy = 1.00 Lcr,z = 0.27 m Xz = 1.00
Lamy = 4.08 kyy = 0.95 Lamz = 7.32 kyz = 0.58
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.17 < 1.00 (6.2.4.(1))
Date : 25/04/15 Page : 40

Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.00 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=16.4 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.05 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.26 m Lam_y = 0.05 Lz = 0.26 m Lam_z = 0.08
Lcr,y = 0.26 m Xy = 1.00 Lcr,z = 0.26 m Xz = 1.00
Lamy = 4.08 kyy = 0.95 Lamz = 7.31 kyz = 0.58
----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 41
N,Ed/Nc,Rd = 0.17 < 1.00 (6.2.4.(1))

Vy,Ed/Vy,T,Rd = 0.01 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=16.4 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.01 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.27 m Lam_y = 0.05 Lz = 0.27 m Lam_z = 0.08
Lcr,y = 0.27 m Xy = 1.00 Lcr,z = 0.27 m Xz = 1.00
Lamy = 4.08 kyy = 0.95 Lamz = 7.31 kyz = 0.58
----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 42

N,Ed/Nc,Rd = 0.17 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=16.4 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.01 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.27 m Lam_y = 0.05 Lz = 0.27 m Lam_z = 0.08
Lcr,y = 0.27 m Xy = 1.00 Lcr,z = 0.27 m Xz = 1.00
Lamy = 4.08 kyy = 0.95 Lamz = 7.31 kyz = 0.58
----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 43
N,Ed/Nc,Rd = 0.17 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.00 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=16.4 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.27 m Lam_y = 0.05 Lz = 0.27 m Lam_z = 0.08
Lcr,y = 0.27 m Xy = 1.00 Lcr,z = 0.27 m Xz = 1.00
Lamy = 4.08 kyy = 0.95 Lamz = 7.32 kyz = 0.58
Date : 25/04/15 Page : 44
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.17 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.00 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=16.4 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.04 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.26 m Lam_y = 0.05 Lz = 0.26 m Lam_z = 0.08
Lcr,y = 0.26 m Xy = 1.00 Lcr,z = 0.26 m Xz = 1.00
Date : 25/04/15 Page : 45
Lamy = 4.08 kyy = 0.95 Lamz = 7.31 kyz = 0.58

----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.17 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.01 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.00 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=16.4 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.04 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.27 m Lam_y = 0.05 Lz = 0.27 m Lam_z = 0.08
Date : 25/04/15 Page : 46
Lcr,y = 0.27 m Xy = 1.00 Lcr,z = 0.27 m Xz = 1.00

Lamy = 4.08 kyy = 0.95 Lamz = 7.32 kyz = 0.58
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.17 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.01 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.00 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=16.4 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Date : 25/04/15 Page : 47
Ly = 0.27 m Lam_y = 0.05 Lz = 0.27 m Lam_z = 0.08

Lcr,y = 0.27 m Xy = 1.00 Lcr,z = 0.27 m Xz = 1.00
Lamy = 4.08 kyy = 0.95 Lamz = 7.31 kyz = 0.58
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.17 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.00 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=16.4 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.01 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 48


Ly = 0.27 m Lam_y = 0.05 Lz = 0.27 m Lam_z = 0.08
Lcr,y = 0.27 m Xy = 1.00 Lcr,z = 0.27 m Xz = 1.00
Lamy = 4.08 kyy = 0.95 Lamz = 7.31 kyz = 0.58
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.17 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=16.4 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.05 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 49

Ly = 0.26 m Lam_y = 0.05 Lz = 0.26 m Lam_z = 0.08
Lcr,y = 0.26 m Xy = 1.00 Lcr,z = 0.26 m Xz = 1.00
Lamy = 4.08 kyy = 0.95 Lamz = 7.31 kyz = 0.58
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.17 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.01 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=16.4 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.04 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

Date : 25/04/15 Page : 50
----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.27 m Lam_y = 0.05 Lz = 0.27 m Lam_z = 0.08
Lcr,y = 0.27 m Xy = 1.00 Lcr,z = 0.27 m Xz = 1.00
Lamy = 4.08 kyy = 0.95 Lamz = 7.32 kyz = 0.58
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.17 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=16.4 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.06 kN*m
----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 51


----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.27 m Lam_y = 0.05 Lz = 0.27 m Lam_z = 0.08
Lcr,y = 0.27 m Xy = 1.00 Lcr,z = 0.27 m Xz = 1.00
Lamy = 4.08 kyy = 0.95 Lamz = 7.31 kyz = 0.58
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.17 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.01 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.00 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=16.4 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.06 kN*m
Date : 25/04/15 Page : 52
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.27 m Lam_y = 0.05 Lz = 0.27 m Lam_z = 0.08
Lcr,y = 0.27 m Xy = 1.00 Lcr,z = 0.27 m Xz = 1.00
Lamy = 4.08 kyy = 0.95 Lamz = 7.31 kyz = 0.58
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.17 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.01 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.00 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------
SECTION PARAMETERS: IPN 140

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed = 53.68 kN My,Ed = 0.56 kN*m Mz,Ed = -0.02 kN*m Vy,Ed = 0.02 kN
Nc,Rd = 501.51 kN My,pl,Rd = 26.17 kN*m Mz,pl,Rd = 4.91 kN*m Vy,T,Rd = 188.71 kN
Tt,Ed = -0.00 kN*m
Date : 25/04/15 Page : 53
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.11 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.00 < 1.00 (6.2.6-7)
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 54
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.11 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.00 < 1.00 (6.2.6-7)
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed = 53.66 kN My,Ed = 0.15 kN*m Mz,Ed = 0.00 kN*m Vy,Ed = -0.00 kN
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 55
N,Ed/Nc,Rd = 0.11 < 1.00 (6.2.4.(1))

Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.00 < 1.00 (6.2.6-7)
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed = 53.64 kN My,Ed = 0.20 kN*m Mz,Ed = 0.00 kN*m Vy,Ed = 0.00 kN
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.11 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.00 < 1.00 (6.2.6-7)
Date : 25/04/15 Page : 56
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.11 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.00 < 1.00 (6.2.6-7)
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
Date : 25/04/15 Page : 57
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.11 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
Date : 25/04/15 Page : 58
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.11 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
Date : 25/04/15 Page : 59
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed = 54.20 kN My,Ed = 0.37 kN*m Mz,Ed = -0.01 kN*m Vy,Ed = -0.04 kN
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.11 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.00 < 1.00 (6.2.6-7)
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
Date : 25/04/15 Page : 60


----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.11 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.00 < 1.00 (6.2.6-7)
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 61
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.11 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.00 < 1.00 (6.2.6-7)
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 62


----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.11 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 63

----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.11 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.11 < 1.00 (6.2.4.(1))
Date : 25/04/15 Page : 64
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)

Vz,Ed/Vz,T,Rd = 0.00 < 1.00 (6.2.6-7)
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.11 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.00 < 1.00 (6.2.6-7)
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
Date : 25/04/15 Page : 65
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.11 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.00 < 1.00 (6.2.6-7)
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 66


----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.11 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.00 < 1.00 (6.2.6-7)
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
Date : 25/04/15 Page : 67

----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.11 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.00 < 1.00 (6.2.6-7)
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 68


h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.11 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
Date : 25/04/15 Page : 69


----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.11 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 70

Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.11 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.00 < 1.00 (6.2.6-7)
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

Date : 25/04/15 Page : 71
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.11 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.00 < 1.00 (6.2.6-7)
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 72
N,Ed/Nc,Rd = 0.11 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.00 < 1.00 (6.2.6-7)
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.11 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.00 < 1.00 (6.2.6-7)
Date : 25/04/15 Page : 73

----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.11 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
Date : 25/04/15 Page : 74

STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.11 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 75

CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.11 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.00 < 1.00 (6.2.6-7)
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
Governing Load Case: 19 ACC /10/ 1*1.00 + 2*1.00 + 3*0.30 + 28*1.00
----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 76
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------
SECTION PARAMETERS: CAE 70x7

h=7.0 cm gM0=1.00 gM1=1.00
tf=0.7 cm Wely=8.41 cm3 Welz=8.41 cm3
----------------------------------------------------------------------------------------------------------------------------------------
Vz,T,Rd = 77.74 kN
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 3.59 m Lam_y = 1.95 Lz = 3.59 m Lam_z = 1.95
Lcr,y = 3.59 m Xy = 0.22 Lcr,z = 3.59 m Xz = 0.22
Lamy = 169.18 kyy = 1.11 Lamz = 169.18 kzz = 1.11
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd + My,Ed/My,c,Rd + Mz,Ed/Mz,c,Rd = 0.11 < 1.00 (6.2.1(7))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.00 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 77
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=7.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Vz,T,Rd = 77.68 kN
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 3.59 m Lam_y = 1.95 Lz = 3.59 m Lam_z = 1.95
Lcr,y = 3.59 m Xy = 0.22 Lcr,z = 3.59 m Xz = 0.22
Lamy = 169.18 kyy = 1.12 Lamz = 169.18 kzz = 1.12
----------------------------------------------------------------------------------------------------------------------------------------
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.00 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 78
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=7.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Vz,T,Rd = 77.67 kN
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 3.59 m Lam_y = 1.95 Lz = 3.59 m Lam_z = 1.95
Lcr,y = 3.59 m Xy = 0.22 Lcr,z = 3.59 m Xz = 0.22
Lamy = 169.18 kyy = 1.12 Lamz = 169.18 kzz = 1.12
----------------------------------------------------------------------------------------------------------------------------------------
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.00 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 79
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=7.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Vz,T,Rd = 77.75 kN
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 3.59 m Lam_y = 1.95 Lz = 3.59 m Lam_z = 1.95
Lcr,y = 3.59 m Xy = 0.22 Lcr,z = 3.59 m Xz = 0.22
Lamy = 169.18 kyy = 1.10 Lamz = 169.18 kzz = 1.10
----------------------------------------------------------------------------------------------------------------------------------------
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.00 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 80
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=7.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Vz,T,Rd = 77.77 kN
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 3.59 m Lam_y = 1.95 Lz = 3.59 m Lam_z = 1.95
Lcr,y = 3.59 m Xy = 0.22 Lcr,z = 3.59 m Xz = 0.22
Lamy = 169.18 kyy = 1.16 Lamz = 169.18 kzz = 1.16
----------------------------------------------------------------------------------------------------------------------------------------
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.00 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 81
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=7.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Vz,T,Rd = 77.69 kN
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 3.59 m Lam_y = 1.95 Lz = 3.59 m Lam_z = 1.95
Lcr,y = 3.59 m Xy = 0.22 Lcr,z = 3.59 m Xz = 0.22
Lamy = 169.18 kyy = 1.14 Lamz = 169.18 kzz = 1.14
----------------------------------------------------------------------------------------------------------------------------------------
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.00 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 82
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=7.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Vz,T,Rd = 77.69 kN
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 3.59 m Lam_y = 1.95 Lz = 3.59 m Lam_z = 1.95
Lcr,y = 3.59 m Xy = 0.22 Lcr,z = 3.59 m Xz = 0.22
Lamy = 169.18 kyy = 1.15 Lamz = 169.18 kzz = 1.15
----------------------------------------------------------------------------------------------------------------------------------------
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.00 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 83
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=7.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Vz,T,Rd = 77.78 kN
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 3.59 m Lam_y = 1.95 Lz = 3.59 m Lam_z = 1.95
Lcr,y = 3.59 m Xy = 0.22 Lcr,z = 3.59 m Xz = 0.22
Lamy = 169.18 kyy = 1.16 Lamz = 169.18 kzz = 1.16
----------------------------------------------------------------------------------------------------------------------------------------
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.00 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 84
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.01 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.03 < 1.00 (6.2.6-7)
----------------------------------------------------------------------------------------------------------------------------------------
LIMIT DISPLACEMENTS
No
se
pude
most
rar la
imag
en
Deflections
v incu
lada.
Pued
e que
se
uz = 0.2 cm < uz max = L/300.00 = 0.6 cm Verified

hay
Governing Load Case: 23 Sísmico - NCh 433.Of96 - horizontal Ecc X+ Dirección_X

No
se
pude
most
rar la
imag
en
Displacements Not analyzed

v incu
lada.
Pued
e que
se
----------------------------------------------------------------------------------------------------------------------------------------
hay
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
Date : 25/04/15 Page : 85


----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.01 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.03 < 1.00 (6.2.6-7)
----------------------------------------------------------------------------------------------------------------------------------------
LIMIT DISPLACEMENTS
No
se
pude
most
rar la
imag
en
Deflections
v incu
lada.
Pued
e que
se
uz = 0.2 cm < uz max = L/300.00 = 0.6 cm Verified

hay

No
se
pude
most
rar la
imag
en

v incu
lada.
Pued
e que
se
----------------------------------------------------------------------------------------------------------------------------------------
hay
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
Date : 25/04/15 Page : 86

----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Nc,Rd = 501.51 kN My,Ed,max = 1.18 kN*m Mz,Ed,max = 0.00 kN*m Vy,c,Rd = 188.73 kN
MN,y,Rd = 26.17 kN*m MN,z,Rd = 4.91 kN*m Vz,c,Rd = 132.66 kN
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.98 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,c,Rd = 0.00 < 1.00 (6.2.6.(1))
Vz,Ed/Vz,c,Rd = 0.01 < 1.00 (6.2.6.(1))
Lambda,y = 14.81 < Lambda,max = 210.00 STABLE
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
Date : 25/04/15 Page : 87
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Nc,Rd = 501.51 kN My,Ed,max = 1.69 kN*m Mz,Ed,max = 0.00 kN*m Vy,T,Rd = 188.73 kN
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.98 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.02 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
Date : 25/04/15 Page : 88
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.98 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.09 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
Governing Load Case: 19 ACC /14/ 1*1.00 + 2*1.00 + 3*0.30 + 23*-1.00
Date : 25/04/15 Page : 89
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Nc,Rd = 501.51 kN My,Ed,max = 0.71 kN*m Mz,Ed,max = -0.64 kN*m Vy,T,Rd = 185.21 kN
Tt,Ed = -0.04 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.99 kyz = 0.66
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.03 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.00 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
Date : 25/04/15 Page : 90
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.61
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.12 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.02 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
Date : 25/04/15 Page : 91
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.61
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.12 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.02 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
Date : 25/04/15 Page : 92
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.61
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.12 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
Date : 25/04/15 Page : 93
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.61
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.12 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.00 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
Date : 25/04/15 Page : 94
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.60
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.13 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.02 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
Date : 25/04/15 Page : 95
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.61
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.13 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
Date : 25/04/15 Page : 96
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.61
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.13 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
Date : 25/04/15 Page : 97
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.61
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.12 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
Date : 25/04/15 Page : 98
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.98 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.03 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
Date : 25/04/15 Page : 99
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.98 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.09 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.02 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
Date : 25/04/15 Page : 100
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.98 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.09 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
Date : 25/04/15 Page : 101
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.98 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.09 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.00 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
Date : 25/04/15 Page : 102
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Nc,Rd = 501.51 kN My,Ed,max = 0.46 kN*m Mz,Ed,max = -0.00 kN*m Vy,c,Rd = 188.73 kN
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.60
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.14 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,c,Rd = 0.00 < 1.00 (6.2.6.(1))
Vz,Ed/Vz,c,Rd = 0.00 < 1.00 (6.2.6.(1))
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
Date : 25/04/15 Page : 103
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.60
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.13 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
Date : 25/04/15 Page : 104
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.60
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.13 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
Date : 25/04/15 Page : 105
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.60
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.13 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
Date : 25/04/15 Page : 106
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.03 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
Date : 25/04/15 Page : 107
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.98 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.02 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
Date : 25/04/15 Page : 108
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.98 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
Date : 25/04/15 Page : 109
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.98 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.00 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
Date : 25/04/15 Page : 110
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.60
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.14 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,c,Rd = 0.00 < 1.00 (6.2.6.(1))
Vz,Ed/Vz,c,Rd = 0.00 < 1.00 (6.2.6.(1))
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 111


h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.60
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.14 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 112

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.60
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.13 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 113

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.60
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.13 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 114

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.03 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 115

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.02 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 116

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 117

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.98 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.00 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 118

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.60
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.14 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,c,Rd = 0.00 < 1.00 (6.2.6.(1))
Vz,Ed/Vz,c,Rd = 0.00 < 1.00 (6.2.6.(1))
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

Date : 25/04/15 Page : 119
h=14.0 cm gM0=1.00 gM1=1.00

----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.60
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.14 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

Date : 25/04/15 Page : 120
h=14.0 cm gM0=1.00 gM1=1.00

----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.60
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.14 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

Date : 25/04/15 Page : 121
h=14.0 cm gM0=1.00 gM1=1.00

----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.60
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.13 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

Date : 25/04/15 Page : 122
h=14.0 cm gM0=1.00 gM1=1.00

----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.11 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.03 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

Date : 25/04/15 Page : 123
h=14.0 cm gM0=1.00 gM1=1.00

----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.02 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

Date : 25/04/15 Page : 124
h=14.0 cm gM0=1.00 gM1=1.00

----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

Date : 25/04/15 Page : 125
h=14.0 cm gM0=1.00 gM1=1.00

----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.00 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

Date : 25/04/15 Page : 126
h=14.0 cm gM0=1.00 gM1=1.00

----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.60
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.14 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,c,Rd = 0.00 < 1.00 (6.2.6.(1))
Vz,Ed/Vz,c,Rd = 0.00 < 1.00 (6.2.6.(1))
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
Date : 25/04/15 Page : 127

----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.60
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.14 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
Date : 25/04/15 Page : 128

----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.60
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.13 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
Date : 25/04/15 Page : 129

----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.60
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.13 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
Date : 25/04/15 Page : 130

----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.02 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
Date : 25/04/15 Page : 131

----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.02 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
Date : 25/04/15 Page : 132

----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
Date : 25/04/15 Page : 133

----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.98 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.00 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
Date : 25/04/15 Page : 134

----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.60
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.14 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,c,Rd = 0.00 < 1.00 (6.2.6.(1))
Vz,Ed/Vz,c,Rd = 0.00 < 1.00 (6.2.6.(1))
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 135
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.60
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.14 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 136
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.60
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.13 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 137
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.60
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.13 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 138
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.11 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.03 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 139
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.02 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 140
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 141
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.98 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.00 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 142
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.60
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.13 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 143
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.60
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.13 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 144
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.61
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.13 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 145
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.61
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.13 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 146
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.98 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.03 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 147
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.98 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.02 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 148
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.98 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 149
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.98 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.00 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 150
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,c,Rd = 0.00 < 1.00 (6.2.6.(1))
Vz,Ed/Vz,c,Rd = 0.01 < 1.00 (6.2.6.(1))
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 151

Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.98 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 152

Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.98 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 153

Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.98 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.00 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 154

Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.61
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.12 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.02 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 155

Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.61
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.12 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.02 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 156

Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.61
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.12 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 157

Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.61
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.12 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 158

Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.60
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.13 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 159

Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.61
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.13 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 160

Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.61
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.13 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 161

Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.61
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.12 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 162

Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.98 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.03 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 163

Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.98 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.02 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 164

Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.98 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.09 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 165

Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.98 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.09 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.00 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 166

----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.60
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.14 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,c,Rd = 0.00 < 1.00 (6.2.6.(1))
Vz,Ed/Vz,c,Rd = 0.00 < 1.00 (6.2.6.(1))
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
Date : 25/04/15 Page : 167
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.60
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.14 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
Date : 25/04/15 Page : 168
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.60
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.13 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
Date : 25/04/15 Page : 169
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.60
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.13 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
Date : 25/04/15 Page : 170
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.03 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
Date : 25/04/15 Page : 171
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.02 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
Date : 25/04/15 Page : 172
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.98 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
Date : 25/04/15 Page : 173
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.98 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.00 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 174

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.60
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.14 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,c,Rd = 0.00 < 1.00 (6.2.6.(1))
Vz,Ed/Vz,c,Rd = 0.00 < 1.00 (6.2.6.(1))
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

Date : 25/04/15 Page : 175
----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.60
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.13 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

Date : 25/04/15 Page : 176
----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.60
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.13 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

Date : 25/04/15 Page : 177
----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.60
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.13 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

Date : 25/04/15 Page : 178
----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.03 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

Date : 25/04/15 Page : 179
----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.98 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.02 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

Date : 25/04/15 Page : 180
----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.98 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

Date : 25/04/15 Page : 181
----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.98 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.00 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

Date : 25/04/15 Page : 182
----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.60
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.13 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.02 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

Date : 25/04/15 Page : 183
----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.61
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.13 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

Date : 25/04/15 Page : 184
----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.61
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.13 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

Date : 25/04/15 Page : 185
----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.61
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.12 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

Date : 25/04/15 Page : 186
----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.98 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.03 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

Date : 25/04/15 Page : 187
----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.98 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.02 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

Date : 25/04/15 Page : 188
----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.98 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.09 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

Date : 25/04/15 Page : 189
----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.98 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.09 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.00 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 190

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.98 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,c,Rd = 0.00 < 1.00 (6.2.6.(1))
Vz,Ed/Vz,c,Rd = 0.01 < 1.00 (6.2.6.(1))
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 191


Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.98 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.02 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 192

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.98 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.04 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 193

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.99 kyz = 0.66
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.03 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.00 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 194

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.61
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.12 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.02 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 195

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.61
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.12 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.02 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 196

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.61
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.12 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 197

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.61
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.12 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.00 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 198

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.60
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.13 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.02 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 199

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.61
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.13 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 200

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.61
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.12 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 201

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.61
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.12 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 202

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.98 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.03 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 203

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.98 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.09 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.02 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 204

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.98 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.09 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 205

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.98 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.09 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.00 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 206


Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.60
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.14 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,c,Rd = 0.00 < 1.00 (6.2.6.(1))
Vz,Ed/Vz,c,Rd = 0.00 < 1.00 (6.2.6.(1))
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Date : 25/04/15 Page : 207
Ly = 0.83 m Lam_y = 0.17

Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.60
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.13 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Date : 25/04/15 Page : 208
Ly = 0.83 m Lam_y = 0.17

Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.60
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.13 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Date : 25/04/15 Page : 209
Ly = 0.83 m Lam_y = 0.17

Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.60
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.13 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Date : 25/04/15 Page : 210
Ly = 0.83 m Lam_y = 0.17

Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.03 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Date : 25/04/15 Page : 211
Ly = 0.83 m Lam_y = 0.17

Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.98 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.02 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Date : 25/04/15 Page : 212
Ly = 0.83 m Lam_y = 0.17

Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.98 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Date : 25/04/15 Page : 213
Ly = 0.83 m Lam_y = 0.17

Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.98 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.00 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Date : 25/04/15 Page : 214
Lcr,y = 0.83 m Xy = 1.00

Lamy = 14.81 kyy = 0.97 kyz = 0.60
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.14 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,c,Rd = 0.00 < 1.00 (6.2.6.(1))
Vz,Ed/Vz,c,Rd = 0.00 < 1.00 (6.2.6.(1))
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.60
Date : 25/04/15 Page : 215
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.14 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.60
Date : 25/04/15 Page : 216
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.13 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.60
Date : 25/04/15 Page : 217
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.13 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.62
Date : 25/04/15 Page : 218
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.11 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.03 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.62
Date : 25/04/15 Page : 219
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.02 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.62
Date : 25/04/15 Page : 220
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.62
Date : 25/04/15 Page : 221
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.00 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.60
----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 222
N,Ed/Nc,Rd = 0.14 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,c,Rd = 0.00 < 1.00 (6.2.6.(1))
Vz,Ed/Vz,c,Rd = 0.00 < 1.00 (6.2.6.(1))
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.60
----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 223
N,Ed/Nc,Rd = 0.14 < 1.00 (6.2.4.(1))

Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.60
----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 224
N,Ed/Nc,Rd = 0.14 < 1.00 (6.2.4.(1))

Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.60
----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 225
N,Ed/Nc,Rd = 0.13 < 1.00 (6.2.4.(1))

Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 226
N,Ed/Nc,Rd = 0.11 < 1.00 (6.2.4.(1))

Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.03 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 227
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))

Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.02 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 228
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))

Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 229
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))

Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.00 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.60
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.14 < 1.00 (6.2.4.(1))
Date : 25/04/15 Page : 230

Vy,Ed/Vy,c,Rd = 0.00 < 1.00 (6.2.6.(1))
Vz,Ed/Vz,c,Rd = 0.00 < 1.00 (6.2.6.(1))
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.60
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.13 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Date : 25/04/15 Page : 231
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)

(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.60
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.13 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Date : 25/04/15 Page : 232
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)

(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.60
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.13 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Date : 25/04/15 Page : 233
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)

(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Date : 25/04/15 Page : 234
Vz,Ed/Vz,T,Rd = 0.02 < 1.00 (6.2.6-7)

(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.98 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Date : 25/04/15 Page : 235
Vz,Ed/Vz,T,Rd = 0.02 < 1.00 (6.2.6-7)

(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.98 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Date : 25/04/15 Page : 236
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)

(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.98 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Date : 25/04/15 Page : 237
Vz,Ed/Vz,T,Rd = 0.00 < 1.00 (6.2.6-7)

(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.60
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.13 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Date : 25/04/15 Page : 238
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)

(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.60
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.13 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Date : 25/04/15 Page : 239
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)

(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.61
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.13 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Date : 25/04/15 Page : 240
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)

(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.61
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.13 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Date : 25/04/15 Page : 241
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)

(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.98 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Date : 25/04/15 Page : 242
Vz,Ed/Vz,T,Rd = 0.03 < 1.00 (6.2.6-7)

(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.98 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Date : 25/04/15 Page : 243
Vz,Ed/Vz,T,Rd = 0.02 < 1.00 (6.2.6-7)

(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.98 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Date : 25/04/15 Page : 244
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)

(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.98 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Date : 25/04/15 Page : 245
Vz,Ed/Vz,T,Rd = 0.00 < 1.00 (6.2.6-7)

(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.98 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,c,Rd = 0.00 < 1.00 (6.2.6.(1))
Vz,Ed/Vz,c,Rd = 0.01 < 1.00 (6.2.6.(1))
Date : 25/04/15 Page : 246

(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.98 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
Date : 25/04/15 Page : 247

(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.98 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
Date : 25/04/15 Page : 248

(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.98 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.00 < 1.00 (6.2.6-7)
Date : 25/04/15 Page : 249

(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.61
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.12 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.02 < 1.00 (6.2.6-7)
Date : 25/04/15 Page : 250

(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.61
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.12 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.02 < 1.00 (6.2.6-7)
Date : 25/04/15 Page : 251

(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.61
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.12 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
Date : 25/04/15 Page : 252

(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.61
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.12 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
Date : 25/04/15 Page : 253

(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.60
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.13 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
Date : 25/04/15 Page : 254

(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.60
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.13 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
Date : 25/04/15 Page : 255

(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.61
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.13 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
Date : 25/04/15 Page : 256

(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.61
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.13 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
Date : 25/04/15 Page : 257

(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.98 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.03 < 1.00 (6.2.6-7)
Date : 25/04/15 Page : 258

(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.98 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.02 < 1.00 (6.2.6-7)
Date : 25/04/15 Page : 259

(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.98 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
Date : 25/04/15 Page : 260

(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.98 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.00 < 1.00 (6.2.6-7)
Date : 25/04/15 Page : 261

(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.60
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.14 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,c,Rd = 0.00 < 1.00 (6.2.6.(1))
Vz,Ed/Vz,c,Rd = 0.00 < 1.00 (6.2.6.(1))
Date : 25/04/15 Page : 262
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.60
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.13 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
Date : 25/04/15 Page : 263
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.60
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.13 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
Date : 25/04/15 Page : 264
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.05 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.99 kyz = 0.65
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.05 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.01 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
Date : 25/04/15 Page : 265
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.02 < 1.00 (6.2.6-7)
Date : 25/04/15 Page : 266
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.98 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.02 < 1.00 (6.2.6-7)
Date : 25/04/15 Page : 267
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.98 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
Date : 25/04/15 Page : 268
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.98 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.00 < 1.00 (6.2.6-7)
Date : 25/04/15 Page : 269
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.60
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.14 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,c,Rd = 0.00 < 1.00 (6.2.6.(1))
Vz,Ed/Vz,c,Rd = 0.00 < 1.00 (6.2.6.(1))
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 270

Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.60
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.14 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 271
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.60
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.14 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 272
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.60
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.13 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 273
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.11 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.03 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 274
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.02 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 275
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 276
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.00 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 277
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.60
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.14 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,c,Rd = 0.00 < 1.00 (6.2.6.(1))
Vz,Ed/Vz,c,Rd = 0.00 < 1.00 (6.2.6.(1))
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
Date : 25/04/15 Page : 278

STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.60
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.13 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
Date : 25/04/15 Page : 279

STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.60
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.13 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
Date : 25/04/15 Page : 280

STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.05 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.99 kyz = 0.65
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.05 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.01 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.00 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
Date : 25/04/15 Page : 281

STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.03 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
Date : 25/04/15 Page : 282

STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.02 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
Date : 25/04/15 Page : 283

STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.98 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
Date : 25/04/15 Page : 284

STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.98 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.00 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
Date : 25/04/15 Page : 285

STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.60
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.13 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.02 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
Date : 25/04/15 Page : 286

STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.61
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.13 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
Date : 25/04/15 Page : 287

STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.61
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.13 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
Date : 25/04/15 Page : 288

STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.97 kyz = 0.61
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.12 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
Date : 25/04/15 Page : 289

STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.98 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.03 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
Date : 25/04/15 Page : 290

STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.98 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.10 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.02 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
Date : 25/04/15 Page : 291

STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.98 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.09 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
Date : 25/04/15 Page : 292

STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP:
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=14.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.17
Lcr,y = 0.83 m Xy = 1.00
Lamy = 14.81 kyy = 0.98 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.09 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.00 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
Date : 25/04/15 Page : 293

Member Group Design
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
ANALYSIS TYPE: Code Group Design
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP: 1 ARCO
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=8.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.05 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.83 m Lam_y = 0.30
Lcr,y = 0.83 m Xy = 0.98
Lamy = 25.89 kyy = 0.98 kyz = 0.62
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.11 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.01 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.01 < 1.00 (6.2.6-7)
Date : 25/04/15 Page : 294


(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP: 2 VIGAS
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=8.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.04 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.04 < 1.00 (6.2.6-7)
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
Date : 25/04/15 Page : 295

STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP: 3 TIRANTES
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=6.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Vz,T,Rd = 76.19 kN
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 3.59 m Lam_y = 2.30 Lz = 3.59 m Lam_z = 2.30
Lcr,y = 3.59 m Xy = 0.16 Lcr,z = 3.59 m Xz = 0.16
Lamy = 199.76 kyy = 1.18 Lamz = 199.76 kzz = 1.18
----------------------------------------------------------------------------------------------------------------------------------------
Vy,Ed/Vy,T,Rd = 0.00 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.00 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
Date : 25/04/15 Page : 296

STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP: 4 ARRIOSTRADOS
----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=8.0 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = -0.00 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.00 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.01 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.00 < 1.00 (6.2.6-7)
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 297

CODE GROUP: 5 ANILLO

----------------------------------------------------------------------------------------------------------------------------------------
LOADS:
----------------------------------------------------------------------------------------------------------------------------------------
MATERIAL:
S 275 ( S 275 ) fy = 275.00 MPa
----------------------------------------------------------------------------------------------------------------------------------------

h=16.4 cm gM0=1.00 gM1=1.00
----------------------------------------------------------------------------------------------------------------------------------------
Tt,Ed = 0.04 kN*m
----------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------

Ly = 0.27 m Lam_y = 0.05 Lz = 0.27 m Lam_z = 0.08
Lcr,y = 0.27 m Xy = 1.00 Lcr,z = 0.27 m Xz = 1.00
Lamy = 4.08 kyy = 0.95 Lamz = 7.32 kyz = 0.58
----------------------------------------------------------------------------------------------------------------------------------------
N,Ed/Nc,Rd = 0.17 < 1.00 (6.2.4.(1))
Vy,Ed/Vy,T,Rd = 0.01 < 1.00 (6.2.6-7)
Vz,Ed/Vz,T,Rd = 0.00 < 1.00 (6.2.6-7)
(6.3.3.(4))
----------------------------------------------------------------------------------------------------------------------------------------
Section OK !!!
STEEL DESIGN
----------------------------------------------------------------------------------------------------------------------------------------
Date : 25/04/15 Page : 298
----------------------------------------------------------------------------------------------------------------------------------------
CODE GROUP: 2 VIGAS
MEMBER: 61 POINT: COORDINATE:
----------------------------------------------------------------------------------------------------------------------------------------
ht=10.0 cm
bf=5.0 cm Ay=6.80 cm2 Az=4.50 cm2 Ax=10.62 cm2
----------------------------------------------------------------------------------------------------------------------------------------
LIMIT DISPLACEMENTS
No
se
pude
most
rar la
imag
en
Deflections
v incu
lada.
Pued
e que
se
uz = 0.6 cm < uz max = L/300.00 = 0.6 cmVerified

hay

No
se
pude
most
rar la
imag
en

v incu
lada.
Pued
e que
se
----------------------------------------------------------------------------------------------------------------------------------------
hay
Section OK !!!
Date : 25/04/15 Page : 299

4.- DIMENSIONAMIENTO VENTEOS.

OT1492/15
Doc. Nº: 0186-CAL-IME-039-060-0002
MECHANICAL DESIGN Date: 21/04/2015
VENTING CALCULATIONS Rev: 0
IMETAL,S.A API 2000 Ed. 6 Sh. Nº: 1 de 2
1.-SERVICE WATER & PCI TANK - T3101

1.1.-DESIGN DATA.
TANK DIAMETER: 15 m
TANK HEIGHT: 12.6 m
STORED PRODUCT: water
MAX VOLUMETRIC FILLING RATE: 46.5 m3/h

MAX RATE OF DISCHARGE: (DISCHARGE GRAVITY) 1644.6 m3/h
ALLOWABLE PRESSURE*: 0.005 barg
ALLOWABLE VACUUM**: 0.005 barg
VOLUME: 2000 m³
1.2.-VENTING CALCULATIONS
1.2.1.-TOTAL INBREATHING.
INBREATHING FLOW RATE: 1644.6 m³/h

INBREATHING THERMAL: 661.4 m³/h
TOTAL INBREATHING: 2306 m³/h
1.2.2.-TOTAL OUTBREATHING:
OUTBREATHING FLOW RATE: 46.5 Nm³/h

OUTBREATHING THERMAL: 329.63 Nm³/h
OTHERS (SPECIFY): 0 Nm³/h
TOTAL OUTBREATHING: 376.13 Nm³/h
1.3.-SELECTION OF THE NOZZLE VENTILATION:
TOTAL INBREATHING: 2306.00 Nm³/h

TOTAL OUTBREATHING: 376.13 Nm³/h
VENT SIZE SELECTED 12"
TOTAL CAPABILITY IN VACUUM: 4026.76 Nm³/h

TOTAL CAPABILITY IN PRESSURE: 4047.36 Nm³/h
RELIEF FLOW CALCULATION OF VENTILATION CHOSEN:
DISCHARGE FLOW ACC. TO CRANE THECNICAL PAPER 410 FOR

A COMPRESSIBLE FLUID CAN BE CALCULATED BY THE FOLLOWING
EXPRESSION:
qh' [Nm³/h]=19,31*Y*d²*[(∆P*p1')/(K*T1*Sg)]½
WHERE,
Y: NET EXPANSION FACTOR FOR COMPRESSIBLE FLOW= 0.95
d: INTERNAL NOZZLE DIAMETER = 304.9 mm
T1: TEMEPERATURE IN STANDARD CONDITIONS = 15 º C = 288 ºK
Sg: SPECIFIC GRAVITY = 1
K: RESISTANCE COEFFICIENT:
Item Expresion (s/Crane) Ki (Crane)
Pipe inlet - K1 = 0.5
Pipe exit - K2 = 1
Pipe friction K3 = fT*L/D; fT = 0.013;L= 400 mm K3 = 0.0171
Elbow 90º r = 1,5d(~RL) Ki =14*fT; 2 elbows K4= 2*Ki K4 = 0.3640
Exit Mesh K5 =0,55*1-ξ²/ξ² K5 = 0.4544
Others 30% -
Total: QT = 1,3 (K1+K2+K3+K4+K5) KT = 3.036
Doc. Nº: 0186-CAL-IME-039-060-0002
MECHANICAL DESIGN Date: 21/04/2015
VENTING CALCULATIONS Rev: 0
IMETAL,S.A API 2000 Ed. 6 Sh. Nº: 2 de 2
fT: PIPE FRICTION DATA FOR COMERCIAL PIPE 12" WITH FLOW IN TURBULENCE ZONE = 0.013
(CRANE PÁG. A-26)
ξ: RELATIONSHIP BETWEEN FREE-OF-WAY AREA THAT LEAVES THE MESH AND THE TOTAL AREA.
IN OUR CASE, WE USE MESH 4 WITH A WIRE DIAMETER 2 mm HAVING AN FREE AREA OF
74%. (Considered only for calculation purposes).
∆P: DIFFERENTIAL PRESSURE BETWEEN THE INPUT AND OUTPUT, IN OUR CASE
PRESSURE, ∆P: 0.005 barg

VACUUM, ∆P: 0.005 barg
P1 ': ABSOLUTE PRESSURE IN BARS ENTRY TO VENT, IN OUR CASE:
PRESSURE P1': 0.985 bar

VACUUM P1': 0.975 bar
P ATM: 0.98 bar
PRESSURE RELIEF FLOW:
qhp' = 4047 Nm³/h
VACUUM RELIEF FLOW:
qhv' = 4027 Nm³/h
1.4.-EMERGENCY VENTING:
THE VENT NOT CONSIDERED FOR EXPOSURE TO FIRE DUE TO PHYSICAL PROPERTIES OF STORED
FLUID.
DUE TO THE VOLUME OF THE STORAGE WATER AND ITS HEAT CAPACITY WOULD REQUIRE
EXPOSURE TO FIRE ON THE SURFACE OF THE TANK FOR SEVERAL DAYS TO BEGIN VENTING
WATER VAPOR BY THIS CAUSE.
THEREFORE, THE EXPOSURE TO FIRE WILL NOT PRODUCE TANK VENT REQUIREMENTS.
5.- DIMENSIONAMIENTO PERNOS DE ANCLAJE.

OT1492/15
Doc. Nº:
DISEÑO PERNOS ANCLAJE Date: 08/05/2015
Norma diseño - ACI 318S-08 Rev: 0
IMETAL,S.A TANQUE DE AGUA BRUTA Y SERVICIOS Sh. Nº: 1 de 1
En el diseño del sistema de anclaje del tanque se han dispuesto llaves de cortante de manera que absorba
los esfuerzos de cortadura derivados de las cargas sísmica garantizando que los pernos trabjen a tracción
Para el diseño de los pernos se utiliza la norma ACI 318S-08, apéndice D mandatoria para el proyecto.
La resistencia de anclaje se determina con el valor mínimo entre:
1.-Resitencia del acero a tracción (D.5.1):

futa= min (1,9*Fy;860 Mpa)= 636.5 MPa
Fy= 335 MPa (Material: S355 JR)
Ase,N= 2014.7 mm²
ф= 0.8
фNsa=Ase,n futa ф= 1026 kN
2.-Resistencia al arrancamiento del hormigón - anclaje a tracción:
Anc/Anco= 0.357
Ѱed,N= 0.840 (Distancias a borde: Ca1= 1050 mm; Ca2= 1,5 hef = 2250)
Ѱc,N= 1 (Hormigón fisurado)
Ѱcp,N= 1 (Anclaje pre-instalado)
λ= 1 (Hormigón peso normal)
kc= 10 (Anclaje pre-instalado)
Ca1= 1050 mm
Ca2= 2250 mm
fc'= 30 MPa
hef= 1500 mm
ф= 0.85
Nb=kc λ raiz(fc') hef^1,5= 3181981 N
Ncb=(Anc/Anco) Ѱed,N Ѱc,N Ѱcp Nb= 954212 N
фNcb= 811080 N
фNn= 811080 N
3.-Resistencia a tracción por deslizamiento de un anclaje a tracción:
Ѱc,p= 1 (Hormigón fisurado)

Np= 8 Arbg fc'= 4808640 N
Arbg= 20036 mm²
фNp= ф Ѱc,p Np = 4087344 N
ф= 0.85
6.- DIMENSIONAMIENTO LLAVE DE CORTANTE.

OT1492/15
IMETAL, S.A.
Camino de la Lloreda a la Picota, 489
33211 - Gijón - Asturias (Spain)
Teléfono: +34 985 314 853
www.imetalsa.es
Simulación de
OT1492_Agua
bruta_Servicios_Llaves
cortante
Fecha: viernes, 08 de mayo de 2015
Diseñador: P.A.
Nombre de estudio: Análisis Silla
Cortante_Tanques Agua Bruta y Servicios
Tipo de análisis: Análisis estático
Table of Contents
Descripción .......................................... 1
Suposiciones ......................................... 2
Información de modelo ............................ 2
Descripción Propiedades del estudio ........................... 3
Análisis de las llaves de cortante de los tanques de Agua Unidades ............................................. 3
Bruta y Servicios utilizando una distribución de los esfuerzos
Propiedades de material .......................... 4
sísmicos mediante el método del coseno cuadrado y
suponiendo el sismo aplicado en la dirección de 0º. Cargas y sujeciones ................................ 5
Definiciones de conector .......................... 5
Carga de diseño 736.3 kN
Información de contacto .......................... 5
Información de malla .............................. 6
Detalles del sensor ................................. 7
Fuerzas resultantes ................................ 7
Vigas .................................................. 8
Resultados del estudio ............................. 9
Conclusión ......................................... 11
Simulación de OT1492_Agua bruta_Servicios_Llaves

cortante 1
IMETAL, S.A.
Camino de la Lloreda a la Picota, 489 P.A.
33211 - Gijón - Asturias (Spain) 08/05/2015
Suposiciones
Con la distribución anteriormente mencionada se supone el sismo aplicado sobre la chapa que va alineada
con el manto. Se desprecian los puntos de concentración local de tensiones.
Información de modelo
Nombre del modelo: OT1492_Agua bruta_Servicios_Llaves cortante

Configuración actual: Predeterminado
Sólidos
Nombre de documento y Ruta al documento/Fecha
Tratado como Propiedades volumétricas
referencia de modificación
Saliente-Extruir8
Masa:48.5162 kg C:\Users \FEA Llaves
Volumen:0.00622003 m^3 cortante\OT1492_Agua
Sólido Densidad:7800 kg/m^3 bruta_Servicios_Llaves
Peso:475.459 N cortante.SLDPRT
May 08 17:28:03 2015

cortante 2
IMETAL, S.A.
Propiedades del estudio

Nombre de estudio Análisis Silla Cortante_Tanques Agua Bruta y
Servicios
Tipo de análisis Análisis estático
Tipo de malla Malla sólida
Efecto térmico: Activar
Opción térmica Incluir cargas térmicas
Temperatura a tensión cero 298 Kelvin
Incluir los efectos de la presión de fluidos desde Desactivar
SolidWorks Flow Simulation
Tipo de solver FFEPlus
Efecto de rigidización por tensión (Inplane): Desactivar
Muelle blando: Desactivar
Desahogo inercial: Desactivar
Opciones de unión rígida incompatibles Automática
Gran desplazamiento Desactivar
Calcular fuerzas de cuerpo libre Activar
Fricción Desactivar
Utilizar método adaptativo: Desactivar
Carpeta de resultados Documento (C:\Users\ OT1492-Techos\FEA Llaves
cortante)
Unidades
Sistema de unidades: Métrico (MKS)
Longitud/Desplazamiento mm
Temperatura Kelvin
Velocidad angular Rad/seg
Presión/Tensión N/m^2

cortante 3
IMETAL, S.A.
Propiedades de material
Referencia de modelo Propiedades Componentes
Nombre: 1.0044 (S275JR) Sólido 1(Saliente-
Tipo de modelo: Isotrópico elástico Extruir8)(OT1492_Agua
lineal bruta_Servicios_Llaves
Criterio de error Tensión máxima de cortante)
predeterminado: von Mises
Límite elástico: 2.75e+008 N/m^2
Límite de tracción: 4.1e+008 N/m^2
Módulo elástico: 2.1e+011 N/m^2
Coeficiente de 0.28
Poisson:
Densidad: 7800 kg/m^3
Módulo cortante: 7.9e+010 N/m^2
Coeficiente de 1.1e-005 /Kelvin
dilatación térmica:
Datos de curva:N/A

cortante 4
IMETAL, S.A.
Cargas y sujeciones
Nombre de
Imagen de sujeción Detalles de sujeción
sujeción
Entidades: 2 cara(s)
Tipo: Geometría fija
Fijo-2
Fuerzas resultantes
Componentes X Y Z Resultante
Fuerza de reacción(N) -736351 1.48047 11.2032 736351
Momento de
0 0 0 0
reacción(N·m)
Nombre de
Cargar imagen Detalles de carga
carga
Tipo: Aplicar fuerza normal
Valor: 736349 N
Fuerza-1
Definiciones de conector
No hay datos
Información de contacto
No hay datos

cortante 5
IMETAL, S.A.
Información de malla
Mallador utilizado: Malla estándar
Transición automática: Desactivar
Incluir bucles automáticos de malla: Desactivar
Puntos jacobianos 4 Puntos
Tamaño de elementos 17.9815 mm
Tolerancia 0.899073 mm
Calidad de malla Elementos cuadráticos de alto orden
Información de malla - Detalles

Número total de nodos 15089
Número total de elementos 8953
Cociente máximo de aspecto 4.6165
% de elementos cuyo cociente de aspecto es < 3 99.8
% de elementos cuyo cociente de aspecto es > 10 0
% de elementos distorsionados (Jacobiana) 0
Tiempo para completar la malla (hh;mm;ss): 00:00:02
Nombre de computadora: PABLO-PC

cortante 6
IMETAL, S.A.
Detalles del sensor

No hay datos
Fuerzas resultantes
Fuerzas de reacción
Conjunto de Suma Y Suma Z Resultante
Unidades Suma X
selecciones
Todo el modelo N -736351 1.48047 11.2032 736351
Momentos de reacción
Unidades Suma X
selecciones
Todo el modelo N·m 0 0 0 0

cortante 7
IMETAL, S.A.
Vigas
No hay datos

cortante 8
IMETAL, S.A.
Resultados del estudio
Nombre Tipo Mín. Máx.

Tensiones1 VON: Tensión de von Mises 105944 N/m^2 5.27729e+008 N/m^2
Nodo: 13031 Nodo: 561
OT1492_Agua bruta_Servicios_Llaves cortante-Análisis Silla Cortante_Tanques Agua Bruta y Servicios-Tensiones-

Tensiones1

Desplazamientos1 URES: Desplazamiento resultante 0 mm 0.700378 mm
Nodo: 531 Nodo: 839

cortante 9
IMETAL, S.A.
OT1492_Agua bruta_Servicios_Llaves cortante-Análisis Silla Cortante_Tanques Agua Bruta y Servicios-

Desplazamientos-Desplazamientos1

Deformaciones unitarias1 ESTRN: Deformación unitaria 6.55605e-007 0.00211353
equivalente Elemento: 6003 Elemento: 3170
OT1492_Agua bruta_Servicios_Llaves cortante-Análisis Silla Cortante_Tanques Agua Bruta y Servicios-Deformaciones

cortante 10
IMETAL, S.A.
unitarias-Deformaciones unitarias1
Conclusión
Se consideran adecuados los niveles tensionales y los desplazamientos.

cortante 11
7.- DIMENSIONAMIENTO SILLAS DE ANCLAJE.

OT1492/15
IMETAL, S.A.
Camino de la Lloreda a la Picota, 489
33211 - Gijón - Asturias (Spain)
Teléfono: +34 985 314 853
www.imetalsa.es
Simulación de
OT1492_Silletas_Agua
_Bruta_PCI_rev0
Fecha: miércoles, 06 de mayo de 2015
Diseñador: P.A.
Nombre de estudio: Análisis FEA silletas
Tanque Agua Bruta y Servicios
Tipo de análisis: Análisis estático
Table of Contents
Descripción .......................................... 1
Suposiciones ......................................... 2
Información de modelo ............................ 2
Propiedades del estudio ........................... 3
Unidades ............................................. 3
Descripción
Análisis por elementos finitos del comportamiento de la silla Propiedades de material .......................... 4
de anclaje en condiciones de fluencia del perno (825.1 KN) Cargas y sujeciones ................................ 5
Definiciones de conector .......................... 5
Información de contacto .......................... 6
Información de malla .............................. 7
Detalles del sensor ................................. 8
Fuerzas resultantes ................................ 8
Vigas .................................................. 9
Resultados del estudio ........................... 10
Conclusión ......................................... 13
Simulación de OT1492_Silletas_Agua_Bruta_PCI_rev0 1
IMETAL, S.A.
Suposiciones
Información de modelo
Nombre del modelo: OT1492_Silletas_Agua_Bruta_PCI_rev0

Configuración actual: Predeterminado
Sólidos
Nombre de documento y Ruta al documento/Fecha
Tratado como Propiedades volumétricas
referencia de modificación
Saliente-Extruir3
Masa:153.935 kg C:\Users\Pablo\FEA
Volumen:0.0197352 m^3 Silletas\OT1492_Silletas_
Sólido Densidad:7800 kg/m^3 Agua_Bruta_PCI_rev0.SLD
Peso:1508.56 N PRT
May 06 23:43:15 2015
IMETAL, S.A.
Propiedades del estudio

Nombre de estudio Análisis FEA silletas Tanque Agua Bruta y Servicios
Tipo de análisis Análisis estático
Efecto térmico: Activar
Opción térmica Incluir cargas térmicas
Temperatura a tensión cero 298 Kelvin
Incluir los efectos de la presión de fluidos Desactivar
Tipo de solver FFEPlus
Efecto de rigidización por tensión (Inplane): Desactivar
Muelle blando: Desactivar
Desahogo inercial: Desactivar
Opciones de unión rígida incompatibles Automática
Gran desplazamiento Desactivar
Calcular fuerzas de cuerpo libre Activar
Fricción Desactivar
Utilizar método adaptativo: Desactivar
Carpeta de resultados Documento (C:\Users\ Pablo\Desktop\OT1492\FEA
Silletas.
Unidades
Sistema de unidades: Métrico (MKS)
Longitud/Desplazamiento mm
Temperatura Kelvin
Velocidad angular Rad/seg
Presión/Tensión N/m^2
IMETAL, S.A.
Propiedades de material
Referencia de modelo Propiedades Componentes
Nombre: 1.0044 (S275JR) Sólido 1(Saliente-
Tipo de modelo: Isotrópico elástico Extruir3)(OT1492_Silletas_Ag
lineal ua_Bruta_PCI_rev1)
Criterio de error Tensión máxima de
predeterminado: von Mises
Límite elástico: 2.75e+008 N/m^2
Límite de tracción: 4.1e+008 N/m^2
Módulo elástico: 2.1e+011 N/m^2
Coeficiente de 0.28
Poisson:
Densidad: 7800 kg/m^3
Módulo cortante: 7.9e+010 N/m^2
Coeficiente de 1.1e-005 /Kelvin
dilatación térmica:
Datos de curva:N/A
IMETAL, S.A.
Cargas y sujeciones
Nombre de
Imagen de sujeción Detalles de sujeción
sujeción
Tipo: Geometría fija
Fijo-1
Fuerzas resultantes
Componentes X Y Z Resultante
Fuerza de reacción(N) 4.04033 824127 -1.28329 824127
Momento de
0 0 0 0
reacción(N·m)
Nombre de
Cargar imagen Detalles de carga
carga
Tipo: Aplicar fuerza normal
Valor: 825100 N
Fuerza-1
Definiciones de conector
No hay datos
IMETAL, S.A.
Información de contacto
No hay datos
IMETAL, S.A.
Información de malla
Mallador utilizado: Malla estándar
Transición automática: Desactivar
Incluir bucles automáticos de malla: Desactivar
Puntos jacobianos 4 Puntos
Tamaño de elementos 24.7831 mm
Tolerancia 1.23915 mm
Calidad de malla Elementos cuadráticos de alto orden
Información de malla - Detalles

Número total de nodos 20544
Número total de elementos 11765
Cociente máximo de aspecto 3.9716
% de elementos cuyo cociente de aspecto es < 3 99.7
% de elementos cuyo cociente de aspecto es > 10 0
% de elementos distorsionados (Jacobiana) 0
Tiempo para completar la malla (hh;mm;ss): 00:00:06
Nombre de computadora: PABLO-PC
IMETAL, S.A.
Detalles del sensor

No hay datos
Fuerzas resultantes
Fuerzas de reacción
Unidades Suma X
selecciones
Todo el modelo N 4.04033 824127 -1.28329 824127
Momentos de reacción
Unidades Suma X
selecciones
Todo el modelo N·m 0 0 0 0
IMETAL, S.A.
Vigas
No hay datos
IMETAL, S.A.
Resultados del estudio

Tensiones1 VON: Tensión de von Mises 3.93394 N/m^2 2.75779e+008 N/m^2
Nodo: 90 Nodo: 20242
OT1492_Silletas_Agua_Bruta_PCI_rev0-Análisis FEA silletas Tanque Agua Bruta y Servicios-Tensiones-Tensiones1

Desplazamientos1 URES: Desplazamiento resultante 0 mm 0.22945 mm
Nodo: 1 Nodo: 5524
IMETAL, S.A.
OT1492_Silletas_Agua_Bruta_PCI_rev0-Análisis FEA silletas Tanque Agua Bruta y Servicios-Desplazamientos-

Desplazamientos1

Deformaciones unitarias1 ESTRN: Deformación unitaria 2.31882e-008 0.000934085
equivalente Elemento: 4558 Elemento: 6915
IMETAL, S.A.
OT1492_Silletas_Agua_Bruta_PCI_rev0-Análisis FEA silletas Tanque Agua Bruta y Servicios-Deformaciones unitarias-

Deformaciones unitarias1
Nombre Tipo
Desplazamientos1{1} Forma deformada
OT1492_Silletas_Agua_Bruta_PCI_rev0-Análisis FEA silletas Tanque Agua Bruta y Servicios-Desplazamientos-

Desplazamientos1{1}
IMETAL, S.A.
Conclusión
El nivel tensional y los desplazamientos están dentro de los valores admisibles.

0186-CAL-IMT-039-060-0002-Tanque Agua Servicios - Cálculos

Cargado por

Copyright:

Formatos disponibles

0186-CAL-IMT-039-060-0002-Tanque Agua Servicios - Cálculos

Cargado por

Información del documento

Título original

Derechos de autor

Formatos disponibles

Compartir este documento

Compartir o incrustar documentos

Opciones para compartir

¿Le pareció útil este documento?

¿Este contenido es inapropiado?

Copyright:

Formatos disponibles

0186-CAL-IMT-039-060-0002-Tanque Agua Servicios - Cálculos

Cargado por

Copyright:

Formatos disponibles

ABEINSA EPC

TANQUE AGUA DE SERVICIOS Y PCI – T3101

Tanque Agua de Servicios y PCI - Cálculos Generales

Cliente: CSP Atacama Uno

Proyecto: CSP Cerro Dominador

PABLO AGÜERIA FERNÁNDEZ

PABLO AGÜERIA FERNÁNDEZ

PABLO AGÜERIA FERNÁNDEZ

Hoja de Control de Revisiones

Revisión Fecha Motivo de la revisión Elaborado Revisado Aprobado

1. CONSIDERACIONES DE DISEÑO Y NORMATIVA APLICABLE.

0186-CAL-IMT-039-060-0002 Tanque Agua Servicios PCI - Cálculos generales IMETAL, S.A.

-Software de diseño: Intergraph Tank 2015.

Equipo: EN10025 S275J2. El equipo se construirá con el material especificado resultante

Altura de diseño de fluido.

0186-CAL-IMT-039-060-0002 Tanque Agua Servicios PCI - Cálculos generales IMETAL, S.A.

0186-CAL-IMT-039-060-0002 Tanque Agua Servicios PCI - Cálculos generales IMETAL, S.A.

0186-CAL-IMT-039-060-0002 Tanque Agua Servicios PCI - Cálculos generales IMETAL, S.A.

PROJECT: CCSP ATACAMA I

CLIENT : ABEINSA EPC - ABENGOA CHILE

NOTES : T-3101 - TANQUE AGUA DE SERVICIOS Y PCI

API-650/653 GENERAL TANK DATA :

API Design Code ( 650 or 653 )......................... 650

Design Temperature ...............................(C ) 42.000

Shell Design Stress [Sd] ..................(N./sq.mm. ) 164.10

Tank Nominal Diameter [D] ........................(mm.) 15010.

Insulation Thickness .............................(mm.) 0.00000

Include Annular Base Plate Details .................... Yes

Number of Shell Courses ............................... 7

TANK SHELL COURSE MATERIALS :

Shell Course # 1 Material Name ........................ S275,J2

Shell Course # 2 Material Name ........................ S275,J2

Shell Course # 2 Minimum Tensile Stress ...(N./sq.mm. ) 410.25

Shell Course # 3 Material Name ........................ S275,J2

Shell Course # 4 Material Name ........................ S275,J2

Shell Course # 5 Material Name ........................ S275,J2

Shell Course # 6 Material Name ........................ S275,J2

Shell Course # 7 Material Name ........................ S275,J2

ANCHOR BOLT DETAILS :

Wind Pressure versus Elevation :

Wind pressure accorting to NCh 432:2010.

API-650 ROOF DETAILS SPECIFICATION :

---/ For Supported Cone Roof Design /---

API-650 SEISMIC DATA (App E.) :

API-650 NOZZLE FLEXIBILITIES (App P.) :

Nozzle Designation / Number # 1........................ A2

Nozzle Height above bottom plate .................(in.) 476.40

Nozzle Designation / Number # 1........................ A3

Nozzle Designation / Number # 1........................ A4A5

Nozzle Designation / Number # 1........................ B1

Nozzle Designation / Number # 1........................ B2R1

Nozzle Weight ....................................(kN ) 0.18900

Nozzle Designation / Number # 1........................ B3

Nozzle Designation / Number # 1........................ O

Nozzle Designation / Number # 1........................ D,R2

Nozzle Designation / Number # 1........................ R3

Nozzle Designation / Number # 1........................ R5

Nozzle Designation / Number # 1........................ B5

Nozzle Designation / Number # 1........................ R5