NT00391 - 09 - T300 Database

MV electrical network management
Gestion des réseaux électriques MT
PowerLogic™
T300
MV substation control unit
Unité de contrôle pour les réseaux de distribution
Database
Appendix to the User Manual
Annexe au Manuel Utilisateur
Internal
PowerLogic T300 Contents / Sommaire
1 INTRODUCTION ..........................................................................................................................................4
2 CONDITION MONITORING .........................................................................................................................5
3 LIST OF DATA POINTS IN COREDB / LISTE DE DONNEES DANS COREDB .......................................6
3.1 HU250........................................................................................................................................................ 6
3.2 SC150 ...................................................................................................................................................... 13
3.3 LV150 ...................................................................................................................................................... 34
3.4 PS50 ........................................................................................................................................................ 56
3.5 ZIGBEE ...................................................................................................................................................... 61
3.6 VIP ........................................................................................................................................................... 63
2 NT00391-09
Internal
NT00391-09
Internal
PowerLogic T300 Introduction
1 Introduction
This document gives the list of data points supported by all the T300 modules.
These points are automatically generated by the T300 Generator configuration
tool.
Each point is defined by:

• A type of SCADA object,
• The first software version or variable from which the variable has been
introduced,
• Its belonging to a generation option in the T300 generator.
Note that the correspondence between the data type and the SCADA objects is
defined in the T300 Quick start user guide.
Note also that this list of data points can also be consulted in the RTU
configuration interface of Easergy Builder software (in CoreDb tab).
Note: in the tables here after, "SCADA Object Type" correspond to the basic
object type from a SCADA view: e.g. single or double digital input or outputs,
analogue inputs/outputs or counters.
Note 2: Some variables have been scaled to harmonize the database format
between all T300 modules. Scaling allows you to scale a variable from a T300
module having its own format. This "scaling" carried out in CoreDB must not be
modified for the proper functioning of the unit.
----------------------------------------------------------------------------------------------------------
Ce document donne la liste des données supportées par tous les modules
T300.
Ces points sont automatiquement générés par l'outil de génération de
configuration T300 Generator.
Chaque point (ou variable) est défini par :

• Un type d'objet SCADA,
• La première version logicielle à partir de laquelle la variable a été
introduite,
• L’appartenance de la variable à une option de génération dans le T300
Generator.
A noter que la correspondance entre le type de donnée et les objets SCADA

sont définis dans le Guide de démarrage T300.
A noter également que cette base de données peut être consultée dans
l'interface de configuration RTU du logiciel Easergy Builder (onglet CoreDb).
Remarque : dans les tableaux ci- après, "SCADA Object Type" correspond au
type d'objet basique d'une vue SCADA, par exemple des entrées digitales
simples ou doubles ou des sorties, des entrées / sorties analogiques ou des
compteurs.
Remarques 2 : certaines variables ont été mises à l'échelle afin d'harmoniser le

format de la base de données entre tous les modules T300. Le "scaling" permet
de mettre à l'échelle une variable issue d'un module T300 ayant son propre
format. Ce "scaling" réalisé dans CoreDB ne doit pas être modifié pour le bon
fonctionnement de l'équipement.
4 NT00391-09
Internal
PowerLogic T300 Condition monitoring
2 Condition monitoring
Condition monitoring (CM) and Zigbee modem related variables have a
specific format that describes their emplacement and role in the installation.
In this document, they are presented in a generic format, using keys
$ZONE$, $LOC$ and $ID$ in the point name and description.
These keys are automatically replaced by texts from the following table,
depending on the condition monitoring options selected in T300 generator.
-----------------------------------------------------------------------------------------------------
Les variables associées au condition monitoring (CM) et au modem Zigbee

ont un format spécifique qui intègre leur position et leur rôle dans
l’installation.
Dans ce document, elles sont présentées avec un format générique,
utilisant les clés $ZONE$, $LOC$ et $ID$ dans le nom de la donnée et sa
description.
Ces clés sont automatiquement remplacées par les textes issus du tableau
suivant, selon les options condition monitoring choisies dans T300
Generator.
Key Label in point name Description Meaning
SUB Substation Condition monitoring zone : Substation

FUN Functional unit Condition monitoring zone : Switch gear functional unit
$ZONE$ CUB Cubicle Condition monitoring zone : Cubicle
PTR Transformer Condition monitoring zone : Power transformer
LVS LV Switchboard Condition monitoring zone : LV Switchboard
ENV Environmental Environmental monitoring
BUS Busbar Thermal sensor location : Busbar
CAB1 Cable 1 Thermal sensor location : Cable 1
CAB2 Cable 2 Thermal sensor location : Cable 2
CABU Cable up Thermal sensor location : Cable up
CABD Cable down Thermal sensor location : Cable down
MV MV connection Thermal sensor location : Transformer MV connection
LV LV connection Thermal sensor location : Transformer LV connection
$LOC$
IN Incomer Thermal sensor location : LV switchboard incomer
FD Feeder Thermal sensor location : LV switchboard feeder
FLOOD Flood Condition monitoring digital input sensor : flood
PRESLO Gas pressure low Condition monitoring digital input sensor : gas pressure low
PRESVLO Gas pressure very low Condition monitoring digital input sensor : gas pressure very low
FUSE Blown fuse Condition monitoring digital input sensor : blown fuse
SUBDOOR Substation door Condition monitoring digital input sensor : substation door
RTUDOOR RTU door Condition monitoring digital input sensor : RTU cabinet door
Corresponds to $LOC$ = BUS for RMU, to $LOC$ = LV for
0 N.A.
Transformer thermal monitoring
$ID$ Corresponds to $LOC$ = CAB1 for RMU, to $LOC$ = MV for
1 N.A.
Transformer thermal monitoring
2 N.A. Corresponds to $LOC$ = CAB2 for RMU
NT00391-09 5
Internal
PowerLogic T300 Database HU250
3 List of data points in CoreDb / Liste de données dans CoreDb

3.1 HU250
HU250
CoreDb type/ Option Software/ Point name/ Point description/ SCADA Object Type/ Bit or enumeration Value
Type CoreDb Logiciel Nom de la donnée Description de la donnée Type d'objet SCADA Liste de valeurs ou bits
0 = No configuration error
Base V0.5 LLN0_CfgHealth_stVal_Fail Head unit configuration error Digital Input
1 = Configuration error
0 = No error
Base V0.5 LLN0_BinHealth_stVal_Fail Head unit error Digital Input
1 = The HU250 is faulty
0 = No error
Base V0.5 LLN0_Health_stVal_Fail General health error Digital Input
1 = Error in PLC or HU250 or Modules
0 = No warning
Base V0.5 LLN0_Health_stVal_Warn General health warning Digital Input
1 = Warning in PLC or HU250 or Modules
0 = No communication error with tango modules
Base V0.5 LLN0_ComHealth_stVal_Fail Internal communication error Digital input
1 = A communication is faulty with one or many modules
0 = No warning
Base V0.5 GenGAPC1_Health_stVal_Warn PLC warning Digital Input
1 = A PLC signal is not mapped in CoreDb
0 = No warning
Base V0.5 GenGAPC1_Health_stVal_Fail PLC error Digital Input
1 = PLC program is stopped
0 = No primary synchronization failure
Base V0.5 LTMS1_TmChErr_stVal Time synchronization failure source 1 Digital Input
1 = Fail in primary synchronization source
0 = No secondary synchronization failure
Base V0.5 LTMS2_TmChErr_stVal Time synchronization failure source 2 Digital Input
1 = Fail in secondary synchronization source
0 = Wi-Fi is off
Wireless V0.5 WiFiLCCH1_ChLiv_stVal WIFI ON/OFF status Digital Input
1 = Wi-Fi is on
Status
0 = No error
Wireless V0.5 WiFiLCCH1_Health_stVal_Fail WIFI health error Digital Input
1 = Error connecting to WIFI
0 = No warning
Wireless V0.5 WiFiLCCH1_Health_stVal_Warn WIFI health warning Digital Input
1 = WIFI connection in progress
0 = T300 is in remote
Base V0.5 LLN0_Loc_stVal System local / remote status Digital Input
1 = T300 is in local
0 = T300 automation is not locked
Base V0.5 SysGAPC1_AutoLocked_stVal System automation locked Digital Input
1 = T300 automation is locked
0 = Automation has not operated
Base V0.5 SysGAPC1_Op_general System automation operated Digital Input
1 = A T300 automation has operated
System automation operation status 0 = T300 automation is OFF
Base V0.5 SysGAPC1_Auto_stVal Digital Input
(ON/OFF) 1 = T300 automation is ON
0 = No switch command in progress
Base V0.5 SysCILO1_OpStr_stVal System switch command in progress Digital Input
1 = A switch command is in progress
0 = No switch command failure
Base V0.5 SysCILO1_OpTmAlm_stVal System switch command failure Digital Input
1 = Last switch command failed
Head Unit Human presence detected 0 = No human presence detected
Base V0.5 HPrsISAF1_Alm_stVal Digital Input
(button pressed) 1 = Human presence detected
0 = Digital input 1 is off
Base V0.5 FeaGGIO1_Ind1_stVal Digital input 1 Digital Input
1 = Digital input 1 is on
6 NT00391-09
HU250
0 = digital input 4 is off
Base V0.5 AcSVPI1_Prs_general AC voltage presence - Digital input 5 Digital Input
Base V0.5 DoorISAF1_Alm_stVal Door open - Digital input 6 Digital Input
0 = Digital output 1 is opened
Base V0.5 FeaGGIO1_SPSSO1_stVal Digital output 1 status Digital Input
1 = Digital output 2 is closed
0 = Digital output 1 is opened
Base V0.5 FeaGGIO1_SPSSO2_stVal Digital output 2 status Digital Input
1 = Digital output 2 is closed
0 = No K7 modem on slot 1
Base V0.7 ComLPHD1_PhyPrs_stVal Slot 1 physical modem detection status Digital Input
1 = A K7 modem has been detected on slot 1
Status 0 = No K7 modem on slot 2
Base V0.7 ComLPHD2_PhyPrs_stVal Slot 2 physical modem detection status Digital Input
1 = A K7 modem has been detected on slot 2
0 = No modem or channel configuration error on slot 1
Base V0.7 ComLPHD1_PhyHealth_Fail Slot 1 physical modem health error Digital Input 1 = A modem or a channel is configured on slot1 and the
expected K7 is not present or not the good one
0 = No modem or channel configuration error on slot 2
Base V0.7 ComLPHD2_PhyHealth_Fail Slot 2 physical modem health error Digital Input 1 = A modem or a channel is configured on slot 2 and the
expected K7 is not present or not the good one
0 = No modem dial-up is configured on slot 1
Wireless V0.7 MdmLCCH1_ChCfg_stVal Slot 1 modem dial-up configured Digital Input
1 = A modem dial-up is configured on slot 1
Wireless V0.7 MdmLCCH2_ChCfg_stVal Slot 2 modem dial-up configured Digital Input
0 = No error on slot1 modem dial-up
Wireless V0.7 MdmLCCH1_ChErr_stVal_Fail Slot 1 modem dial-up health error Digital Input
1 = An error has occurred on slot1 modem dial-up
0 = No error on slot2 modem dial-up
Wireless V0.7 MdmLCCH2_ChErr_stVal_Fail Slot 2 modem dial-up health error Digital Input
1 = An error has occurred on slot2 modem dial-up
0 = -113 dBm or less
1 = -111 dBm
Slot 1 modem received signal strength
Wireless V0.7 MdmLCCH1_ChRssi_stVal Counter 2..30 = -109 ... -53 dBm
Indication
31 = -51 dBm or greater
99 = not known or not detectable
NT00391-09 7
Internal
HU250
0 = -113 dBm or less
1 = -111 dBm
Slot 2 modem received signal strength
Wireless V0.7 MdmLCCH2_ChRssi_stVal Counter 2..30 = -109 ... -53 dBm
Indication
31 = -51 dBm or greater
99 = not known or not detectable
0 = GPRS
1 = EDGE
Wireless V0.7 MdmLCCH1_ChRat_stVal Slot 1 modem radio network type Counter 2 = 3G
3 = HSDPA
4 = 4G
0 = GPRS
1 = EDGE
Wireless V0.7 MdmLCCH2_ChRat_stVal Slot 2 modem radio network type Counter 2 = 3G
3 = HSDPA
4 = 4G
0 = PPP interface on slot 1 modem dial-up is down
Wireless V0.7 MdmLCCH1_ChLiv_stVal Slot 1 ppp over modem interface status Digital Input
1 = PPP interface on slot 1 modem dial-up is up
0 = PPP interface on slot 2 modem dial-up on is down
Wireless V0.7 MdmLCCH2_ChLiv_stVal Slot 2 ppp over modem interface status Digital Input
1 = PPP interface on slot 2 modem dial-up on is up
0 = Sensor is connected and working properly
Base V0.7 HealthSTMP1_Health_Fail Temperature sensor error Digital Input
1 = Sensor is disconnected or is faulty
Reset button, short pulse - reset FPI and
Base V0.7 SysIHMI1_RstS_stVal Digital Input 0->1 = A local automation and FPI reset has been executed
Status automation
0 = Automation has been set to OFF locally
Base V0.7 SysIHMI1_Auto_stVal Automation ON/OFF button Digital Input
1 = Automation has been set to ON locally
Led 1 status (indicates AC power on
Base V0.7 SysIHMI1_Led1_stVal DB Digital Input Correspond to led 1 status depending customization
standard T300)
Led 2 status (indicates 24/48V motor
supply on standard T300)
Led 3 status (indicates 12V
communications supply on standard T300)
Led 4 status (indicates 12V
Base V0.7 SysIHMI1_Led4_stVal communications supply fault on standard DB Digital Input Correspond to led 4 status depending customization
T300)
Led 5 status (indicates battery fault on
standard T300)
Base V0.7 SysIHMI1_Led6_stVal Led 6 status (Generic Led 1) DB Digital Input Correspond to led 6 status depending customization
Base V0.7 FaultIHMI1_Lamp1_stVal Lamp 1 status Digital Input Correspond to Lamp Green status depending customization
Base V0.7 FaultIHMI1_Lamp2_stVal Lamp 2 status Digital Input Correspond to Lamp Red status depending customization
0 = No warning
Base V1.3 GpsLCCH1_Health_stVal_Fail GPS health error Digital Input
1 = Error with GPS connection
8 NT00391-09
HU250
ATS V1.5 AATS1_ActSrc_stVal Active Source (1, 2, 0: In-transit) DB Digital Input
ATS V1.5 AATS1_AutoIntSt_stVal ATS internal state Analogue Input
ATS V1.5 AATS1_AutoIntRes_stVal ATS internal result Analogue Input
ATS V1.5 AATS1_RetryCnt_stVal Number of source transfer attempts Counter
ATS V1.5 AATS1_RetCnt_stVal Number of retries for return to normal Counter
ATS V1.5 AATS1_PosInv_stVal ATS Initial switch position invalid Digital Input
ATS V1.5 AATS1_WaitVPrs_stVal ATS Waiting for voltage presence Digital Input
ATS V1.5 AATS1_Rdy_stVal ATS Ready (waiting for voltage absence) Digital Input
ATS V1.5 AATS1_TfrChk_stVal ATS checking transfer conditions Digital Input
ATS V1.5 AATS1_RetChk_stVal ATS checking return conditions Digital Input
ATS V1.5 AATS1_TfrStr_stVal ATS transfer started Digital Input
ATS V1.5 AATS1_SeqStr_stVal ATS sequence started Digital Input
ATS V1.5 AATS1_Blk_stVal ATS blocked (conditions not satisfied) Digital Input
ATS V1.5 AATS1_BlkOpTfr_stVal ATS switch operation blocked Digital Input
Base V1.5 LLN0_Health_stVal Module health enumeration Enumeration 1 = Ok, 2=Warning, 3=Error
CM\Base V1.6 CMGEN_CMHealth Summary condition monitoring status Enumeration
Status
CM\DigitalInput V1.6 CM$ZONE$SFOD1_Ind $ZONE$ Flood input status Digital Input
CM\DigitalInput V1.6 CM$ZONE$SFOD1_CMHealth $ZONE$ Flood condition monitoring status. Enumeration
CM\DigitalInput V1.6 CM$ZONE$SIMG1_PresLo $ZONE$ Pressure low status Digital Input
CM\DigitalInput V1.6 CM$ZONE$SIMG1_PresLoHlth $ZONE$ Pressure low condition monitoring status. Enumeration
CM\DigitalInput V1.6 CM$ZONE$SIMG2_PresVLo $ZONE$ Pressure very low status Digital Input
CM\DigitalInput V1.6 CM$ZONE$SIMG2_PresVLoHlth $ZONE$ Pressure very low condition monitoring status. Enumeration
CM\DigitalInput V1.6 CM$ZONE$SPSE1_GteSt $ZONE$ Substation door status Digital Input
CM\DigitalInput V1.6 CM$ZONE$SPSE1_CMHealth $ZONE$ Substation door condition monitoring status. Enumeration
CM\DigitalInput V1.6 CM$ZONE$SPSE2_GteSt $ZONE$ RTU door status Digital Input
CM\DigitalInput V1.6 CM$ZONE$SPSE2_CMHealth $ZONE$ RTU door condition monitoring status. Enumeration
CM\DigitalInput V1.6 CM$ZONE$XFUS1_FuSt $ZONE$ Blown fuse status Digital Input
CM\DigitalInput V1.6 CM$ZONE$XFUS1_CMHealth $ZONE$ Blown fuse condition monitoring status. Enumeration
CM\Environment V1.6 CM$ZONE$_MMET1_CMHealth $ZONE$ environmental condition monitoring status. Enumeration
CM\Environment V1.6 CM$ZONE$_MMET1_MntLast $ZONE$ Date of last maintenance Date
CM\Environment V1.6 CM$ZONE$_MMET1_MntNext $ZONE$ Date of next maintenance Date
CM\Environment V1.6 CM$ZONE$_MMET1_HumCnt $ZONE$ Number of days with high humidity [0 - 5] Counter
NT00391-09 9
Internal
HU250
CoreDb Option Software/ Point name/ Point description/ SCADA Object Bit or enumeration Value
type/ Logiciel Nom de la donnée Description de la donnée Type/ Liste de valeurs ou bits
Type Type d'objet
CoreDb SCADA
CM\Environment V1.6 CM$ZONE$_MMET1_CdsLev $ZONE$ Condensation Level [0 - 3] Counter
CM\Environment V1.6 CM$ZONE$_MMET1_HumADay $ZONE$ High humidity for 24 hours alarm Digital Input
CM\Environment V1.6 CM$ZONE$_MMET1_HumACnt $ZONE$ High humidity for 5 days alarm Digital Input
CM\Environment V1.6 CM$ZONE$_MMET1_TmpAlm $ZONE$ High temperature alarm Digital Input
$ZONE$ Condensation presence alarm (cold point
V1.6
CM\Environment CM$ZONE$_MMET1_CdsAlm temperature less than dew point) Digital Input
CM\Thermal V1.6 CM$ZONE$_STMP$ID$_CMHealth $ZONE$ $LOC$ Thermal condition monitoring status. Enumeration
CM\Thermal V1.6 CM$ZONE$_STMP$ID$_TmpAPhA $ZONE$ $LOC$ Temperature alarm in phase A. Enumeration
Status V1.6
CM\Thermal CM$ZONE$_STMP$ID$_TmpAPhB $ZONE$ $LOC$ Temperature alarm in phase B. Enumeration
CM\Thermal V1.6 CM$ZONE$_STMP$ID$_TmpAPhC $ZONE$ $LOC$ Temperature alarm in phase C. Enumeration
CM\Thermal V1.6 CM$ZONE$_STMP$ID$_TmpADsc $ZONE$ $LOC$ Temperature discrepancy alarm Enumeration
CM\Zone V1.6 CM$ZONE$_CMHealth $ZONE$ summary condition monitoring status Enumeration
ATS V2.8 AATS1_Rdy_stVal ATS Ready (waiting for voltage absence) Digital Input
ATS V2.8 AATS1_SeqStr_stVal ATS sequence started Digital Input
Base V2.8 LLN0_ActSG_stVal System active settings group Analogue Input 1 or 2
Base V2.8 LLN0_EditSG_stVal System setting group for edits Analogue Input 0 means none, 1 or 2
NOTE: The following status signals related to Wi-Fi are not available in the V2.8.2+ without Wireless and in the V2.9+ without Wireless software:
Point name/ Point description/

Nom de la donnée Description de la donnée
WiFiLCCH1_ChLiv_stVal WIFI ON/OFF status
WiFiLCCH1_Health_stVal_Fail WIFI health error
WiFiLCCH1_Health_stVal_Warn WIFI health warning
MdmLCCH1_ChCfg_stVal Slot 1 modem dial-up configured
MdmLCCH2_ChCfg_stVal Slot 2 modem dial-up configured
MdmLCCH1_ChErr_stVal_Fail Slot 1 modem dial-up health error
MdmLCCH2_ChErr_stVal_Fail Slot 2 modem dial-up health error
MdmLCCH1_ChRssi_stVal Slot 1 modem received signal strength Indication
MdmLCCH2_ChRssi_stVal Slot 2 modem received signal strength Indication
MdmLCCH1_ChRat_stVal Slot 1 modem radio network type
MdmLCCH2_ChRat_stVal Slot 2 modem radio network type
MdmLCCH1_ChLiv_stVal Slot 1 ppp over modem interface status
MdmLCCH2_ChLiv_stVal Slot 2 ppp over modem interface status
10 NT00391-09
HU250
0 = Switch off WIFI
Wireless V0.5 WiFiLCCH1_ChEna_stVal WIFI ON/OFF command Digital Output
1 = Switch on WIFI
System automation operation control 0 = Switch off automatism
Base V0.5 SysGAPC1_AutoOn_stVal Digital Output
enable/disable 1 = Switch on automatism
Base V0.5 SysGAPC1_AutoReset_stVal System automation reset command Digital Output 1 = Reset automation
Base V0.5 LLN0_FltIndRs_stVal System reset FPI indicators (all modules) Digital Output 1 = Reset T300 FPI indicators
Base V0.5 LLN0_FltCntRs_stVal System reset FPI counters (all modules) Digital Output 1 = Reset T300 FPI counters
System reset power quality event
Base V0.5 LLN0_EvtCntRs_stVal Digital Output 1 = Reset T300 Power quality event counters
counters (MV modules)
System reset energy counters (MV
Base V0.5 LLN0_EnCntRs_stVal Digital Output 1 = Reset T300 Energy counters
modules)
0 = Open digital output 1
Base V0.5 FeaGGIO1_SPCSO1_stVal Digital output 1 command Digital Output
1 = Close digital output 1
0 = Open digital output 2
Command Base V0.5 FeaGGIO1_SPCSO2_stVal Digital output 2 command Digital Output
1 = Close digital output 2
System reset min/max average current
Base V1.2 LLN0_RsStat_stVal Digital Output 1 = Reset T300 Min/Max values
values (MV modules)
System reset power quality event
Base V1.2 LLN0_EvtCntRs2_stVal Digital Output 1 = Reset T300 Power quality event counters
counters (LV modules)
System reset energy counters (LV
Base V1.2 LLN0_EnCntRs2_stVal Digital Output 1 = Reset T300 Energy counters
modules)
System reset min/max average current
Base V1.2 LLN0_RsStat2_stVal Digital Output 1 = Reset T300 Min/Max values
values (LV modules)
Base V1.2 SysIHMI1_TstMod_stVal System commissioning test (all modules) Digital Output 1 = Switch on T300 commissioning test
Base V2.7 SysIHMI1_TstLed_stVal System led test (all modules) Digital Output 1 = Switch on T300 led test
Base V2.8 LLN0_SetActSG_stVal System select active settings group DB Digital Output 1 or 2
Base V2.8 LLN0_SetEditSG_stVal System select settings group for edit DB Digital Output 1 or 2
Base V2.8 LLN0_CnfEdit_stVal System confirm settings group edits Digital Output 0 = cancel, 1 = apply
NOTE: The following status signals related to Wi-Fi are not available in the V2.8.2+ without Wireless and in the V2.9+ without Wireless software:
Point name/ Point description/

Nom de la donnée Description de la donnée
WiFiLCCH1_ChEna_stVal WIFI ON/OFF command
NT00391-09 11
Internal
HU250
CoreDb Option Software/ Point name/ Point description/ SCADA Object Type/ Unit/ Rang Rang Scale/ Defaul
type/ Logiciel Nom de la donnée Description de la donnée Type d'objet SCADA Unit e e Echell t/
Type é Min/ Max/ e Par
CoreDb Valeu Valeu défaut
r min r Max
Base V0.5 LPHD1_CpuRate_mag CPU usage – average for 1 second Analogue Input % 0 100
Base V0.5 InstSTMP1_Tmp_mag Temperature Analogue Input °C -246 408
Base V0.7 AvhSTMP1_Tmp_mag Temperature: hourly average Analogue Input °C
CM\Environ
V1.6 CM$ZONE$_MMET1_MntAP $ZONE$ Reduction factor for maintenance period Analogue Input
ment
CM\Environ
V1.6 MMET_EnvHum Substation relative humidity Analogue Input %
ment
CM$ZONE$_STMP$ID$_TmpD $ZONE$ $LOC$ Temperature discrepancy between
CM\Thermal V1.6 Analogue Input °C
sc phases
CM$ZONE$_STMP$ID$_TmpM $ZONE$ $LOC$ Temperature maximum value in phase
axA A before setting alarm.
CM$ZONE$_STMP$ID$_TmpP $ZONE$ $LOC$ Temperature maximum value in phase
Analog CM\Thermal V1.6 Analogue Input °C
MaxA A before setting pre-alarm.
axB B before setting alarm.
MaxB B before setting pre-alarm.
axC C before setting alarm.
MaxC C before setting pre-alarm.
Base V2.7 LPHD1_AvCpuRate_mag CPU usage - average for 1 minute % 0 100
Base V2.8 RtuSTMP1_Tmp_mag Head unit internal temperature Analogue Input °C
Base V2.8.1 LPHD1_MemUsed_stVal Memory usage Analogue Input % 0 100
HU250
CoreDb type/ Option Software/ Point name/ Point description/ SCADA Object Type/ Default/
Type CoreDb Logiciel Nom de la donnée Description de la donnée Type d'objet SCADA Par défaut
Base V2.8 LPHD1_PhyNam_model Device model String Setting
Base V2.8 LPHD1_PhyNam_vendor Vendor String Setting
String Base V2.8 LPHD1_PhyNam_hwRev Hardware revision String Setting
Base V2.8 LPHD1_PhyNam_swRev Software revision String Setting
Base V2.8 LPHD1_PhyNam_serNum Serial number String Setting
12 NT00391-09
PowerLogic T300 Database SC150
3.2 SC150
SC150
Base V0.4 LLN0_Health_stVal_Fail Module health error Digital Input 0 = Ok, 1 = Error
Base V0.4 LTMS1_TmSynErr_stVal Time not synchronized Digital Input 0 = Ok, 1 = Error
Base V0.4 LTMS1_TmChErr_stVal Time synchronization source failure Digital Input 0 = Ok, 1 = Error
Base V0.4 MainXSWI1_Pos_stVal Main switch position status DB Digital Input 0 = intermediate-state, 1 = off, 2 = on, 3 = bad-state
Base V0.4 MainCSWI1_Pos_stVal Main switch filtered position status DB Digital Input 0 = intermediate-state, 1 = off, 2 = on, 3 = bad-state
Switch operation started (command
Base V0.4 MainCSWI1_OpStr_stVal Digital Input 0 = Inactive, 1 = Command in progress
request / in progress)
Base V0.4 EarthXSWI1_Pos_stVal Earth disconnecting switch position DB Digital Input 0 = intermediate-state, 1 = off, 2 = on, 3 = bad-state
Base V0.4 MainSSWI1_OpTmAlm_stVal Main switchgear control failure Digital Input 0 = Ok, 1 = last command failed
Base V0.4 MainXSWI1_OpCnt_stVal Main switch, number of operations Counter
Base V0.4 SimXSWI1_Pos_stVal Simulated switch position status DB Digital Input 0 = intermediate-state, 1 = off, 2 = on, 3 = bad-state
Base V0.4 FeaGGIO1_Ind5_stVal Digital input 5 or Switch interlock input Digital Input 0 = input inactive, 1 = input active
Base V0.4 ExtSVPI1_Prs_general Digital input 6 or Voltage presence Digital Input 0 = input inactive, 1 = input active
Base V0.4 FeaGGIO1_Ind7_stVal Digital input 7 Digital Input 0 = input inactive, 1 = input active
Status Base V0.4 FeaGGIO1_Ind8_stVal Digital input 8 Digital Input 0 = input inactive, 1 = input active
Module Human presence detected (button
Base V0.4 HPrsISAF2_Alm_stVal Digital Input 0 = Ok, 1 = Human presence detected
pressed)
0 = all voltages above threshold, 1 = at least 1 phase
Base V0.4 SvSVPI1_Abs_general Voltage absence for all phases Digital Input
voltage below threshold
0 = at least 1 phase voltage below threshold, 1 = all phase
Base V0.4 SvSVPI1_Prs_general Voltage presence for all phases Digital Input
voltages above threshold
Depending on the configuration setting, this is a copy of
Voltage presence for HMI – at least one
Base V0.4 MvSVPI1_Prs_general Digital Input "Voltage presence from measured values" or "Digital input
phase
6"
0 = all currents above threshold, 1 = at least 1 phase
Base V0.4 SvSCPI1_Abs_general Current absence for at least one phase Digital Input
current below threshold
0 = at least 1 current below threshold, 1 = all phase
Base V0.4 SvSCPI1_Prs_general Current presence for all phases Digital Input
currents above threshold
Base V0.4 GenGAPC1_AutoLocked_stVal Module automation locked Digital Input 0 = unlocked, 1 = locked
Base V0.4 GenSFPI1_FltInd_general General fault indication Digital Input 0 = normal, 1 = fault detected
Base V0.4 GenSFPI1_FltInd_phsA Fault indication on phase A Digital Input 0 = normal, 1 = fault detected
Base V0.4 GenSFPI1_FltInd_phsB Fault indication on phase B Digital Input 0 = normal, 1 = fault detected
NT00391-09 13
Internal
SC150
Base V0.4 GenSFPI1_FltInd_phsC Fault indication on phase C Digital Input 0 = normal, 1 = fault detected
Base V0.4 PhSFPI1_FltInd_general Phase fault detected Digital Input 0 = normal, 1 = fault detected
Base V0.4 EfSFPI1_FltInd_general Earth fault detected Digital Input 0 = normal, 1 = fault detected
Base V0.4 XcSFPI1_FltInd_general Cross-country fault detected Digital Input 0 = normal, 1 = fault detected
Base V0.4 GenSFPI1_InsNum_stVal PTOC instance number for fault Analogue Input
Base V0.4 CbrRREC1_RecCyc_stVal Calculated breaker reclose cycle count Analogue Input
Base V0.4 GenSFPI1_TrFltInd_general Transient fault Digital Input 0 = normal, 1 = fault detected
Base V0.4 GenSFPI1_SpFltInd_general Semi-permanent fault Digital Input 0 = normal, 1 = fault detected
Base V0.4 GenSFPI1_PmFltInd_general Permanent fault Digital Input 0 = normal, 1 = fault detected
Base V0.4 GenSFPI1_TrFltCnt_stVal General transient fault count Counter
Base V0.4 GenSFPI1_SpFltCnt_stVal General semi-permanent fault count Counter
Base V0.4 GenSFPI1_PmFltCnt_stVal General permanent fault count Counter
Base V0.4 PhSFPI1_TrFltCnt_stVal Phase transient fault count Counter
Base V0.4 PhSFPI1_SpFltCnt_stVal Phase semi-permanent fault count Counter
Base V0.4 PhSFPI1_PmFltCnt_stVal Phase permanent fault count Counter
Base V0.4 EfSFPI1_TrFltCnt_stVal Earth transient fault count Counter
Status
Base V0.4 EfSFPI1_SpFltCnt_stVal Earth semi-permanent fault count Counter
Base V0.4 EfSFPI1_PmFltCnt_stVal Earth permanent fault count Counter
Base V0.4 XcSFPI1_SpFltCnt_stVal Cross-country semi-permanent fault count Counter
Base V0.4 XcSFPI1_PmFltCnt_stVal Cross-country permanent fault count Counter
Base V0.4 LLN0_ActSG_stVal Active settings group Analogue Input 1 or 2
0 = Good, 1 = Invalid, 3 = Questionable
11 = Questionable due to out-of-range, 65 = Invalid due to
Base V1.0 PMr_MMXU1_QDetCodA_mag Quality detail code for current Analogue Input
ADC Failure, 515 = Questionable and Inaccurate on
startup
Base V1.0 PMr_MMXU1_QDetCodV_mag Quality detail code for voltage Analogue Input See Quality detail code for current
Base V1.0 LCCH1_ChLiv_stVal Module communication active status Digital Input 0 = No communications, 1 = communications ok
Base V1.0 LLN0_CfgHealth_stVal_Warn Configuration health Digital Input 0 = Ok, 1 = Warning
Base V1.0 LPHD1_PhyHealth_stVal_Fail Module physical health error Digital Input 0 = Ok, 1 = Error
Base V1.0 LTMS2_TmChErr_stVal 1Hz time signal unstable Digital Input 0 = Ok, 1 = Error
Main switchgear control failure reason
Base V1.0 MainSSWI1_OpErrCod_stVal Analogue Input See appendix of T300 user manual
code
0 = automation has not operated, 1 = automation has
Base V1.0 GenGAPC1_Op_general Module automation operated Digital Input
operated
14 NT00391-09
SC150
CoreDb type/ Option Software/ Point name/ Point description/ SCADA Object Bit or enumeration Value
Type CoreDb Logiciel Nom de la donnée Description de la donnée Type/ Liste de valeurs ou bits
Type d'objet
SCADA
0 = network absent, 1 = network present. Depending on
Network presence for FPI functions
Base V1.0 GenSFPI1_Prs_general Digital Input the configuration settings, this is a copy of the voltage
(voltage or current)
presence or current presence inputs
Base V1.0 GenSFPI1_FltInd_dirGen_Fwd Fault direction forward Digital Input 0 = normal, 1 = fault detected in forward direction
Base V1.0 GenSFPI1_FltInd_dirGen_Bwd Fault direction backward Digital Input 0 = normal, 1 = fault detected in backward direction
BC V1.0 BCPTOV1_Op_general Broken conductor detection - instance 1 Digital Input 0 = normal, 1 = fault detected
PQ V1.0 PQS_QIUB1_VaStr_stVal Current unbalance variation indication Digital Input 0 = normal, 1 = current unbalance is greater than threshold
0 = normal, 1 = voltage unbalance is greater than
PQ V1.0 PQS_QVUB1_VaStr_stVal Voltage unbalance variation indication Digital Input
threshold
PQ V1.0 PQS_QIUB1_VaEvtCnt_stVal Current unbalance variation event counter Counter
PQ V1.0 PQS_QVUB1_VaEvtCnt_stVal Voltage unbalance variation event counter Counter
PQ V1.0 PQS_QVVR1_DipStr_stVal Voltage dip indication Digital Input 0 = normal, 1 = dip in progress
PQ V1.0 PQS_QVVR1_SwlStr_stVal Voltage swell indication Digital Input 0 = normal, 1 = swell in progress
PQ V1.0 PQS_QVVR1_IntrStr_stVal Voltage interruption indication Digital Input 0 = normal, 1 = interruption in progress
Short duration voltage dip event count,
PQ V1.0 PQS_QVVR1_DipEvtCnt1_stVal Counter
duration less than EvtTmms1
Status PQ V1.0 PQS_QVVR1_DipEvtCnt2_stVal Medium duration voltage dip event count Counter
Long duration voltage dip event count,
duration greater than EvtTmms2
Short duration voltage swell event count,
PQ V1.0 PQS_QVVR1_SwlEvtCnt1_stVal Counter
PQ V1.0 PQS_QVVR1_SwlEvtCnt2_stVal Medium duration voltage swell event count Counter
Long duration voltage swell event count,
PQ V1.0 PQS_QVVR1_IntrEvtCnt1_stVal Short interruption counter Counter
PQ V1.0 PQS_QVVR1_IntrEvtCnt2_stVal Long interruption counter Counter
1Hz time signal not synchronised
Base V1.1 LTMS2_TmSynErr_stVal Digital Input 0 = Ok, 1 = Error
(IEEE1588)
Base V1.1 LTMS2_OfsTmns_stVal Offset from master clock Analogue Input
Internal communications sampled values
Base V1.1 LCCH2_InOv_stVal Digital Input 0 = Ok, 1 = Warning
lost
Module communications analog
Base V1.1 LCCH1_MvOutOv_stVal DB Digital Input 0 = Ok, 1 = Warning
measurement events lost
Base V1.1 LCCH1_SpOutOv_stVal Module communications status events lost DB Digital Input 0 = Ok, 1 = Warning
Module communications counter events
Base V1.1 LCCH1_CntOutOv_stVal DB Digital Input 0 = Ok, 1 = Warning
lost
NT00391-09 15
Internal
SC150
Fault direction: none | forward | backward |
Base V1.1 GenSFPI1_FltInd_dirGen DB Digital Input 0 = none, 1 = forward, 2 = backward, 3 = unknown
unknown
Base V1.1 GenSFPI1_FltInd_dirGen_Unk Fault direction unknown Digital Input 0 = normal, 1 = fault detected with unknown direction
General transient fault count in forward
Base V1.1 FwdSFST1_TrFltCnt_stVal Counter
direction
General semi-permanent fault count in
Base V1.1 FwdSFST1_SpFltCnt_stVal Counter
forward direction
General permanent fault count in forward
Base V1.1 FwdSFST1_PmFltCnt_stVal Counter
direction
General transient fault count in backward
Status Base V1.1 BwdSFST1_TrFltCnt_stVal Counter
direction
Base V1.1 BwdSFST1_SpFltCnt_stVal Counter
backward direction
General permanent fault count in
Base V1.1 BwdSFST1_PmFltCnt_stVal Counter
backward direction
General transient fault count in unknown
Base V1.1 UnkSFST1_TrFltCnt_stVal Counter
direction
Base V1.1 UnkSFST1_SpFltCnt_stVal Counter
unknown direction
General permanent fault count in unknown
Base V1.1 UnkSFST1_PmFltCnt_stVal Counter
direction
SC150
CoreDb type/ Option Software/ Point name/ Point description/ SCADA Object Type/ Unit/Unité Range Min/ Range Max/ Scale/ Default/
Type CoreDb Logiciel Nom de la donnée Description de la donnée Type d'objet SCADA Valeur min Valeur Max Echelle Par défaut
Analogue Input for
Status PM V1.1 PMa_MMXU1_ClcIntvPer_setVal Calculation Interval Period min 1 60 10
Integer Setting
SC150
Base V1.2 AbsPTUV1_Op_general Voltage absence indication instance 1 Digital Input 0 = Ok, 1 = at least one voltage below threshold
Base V1.2 PrsPTOV1_Op_general Voltage presence indication instance 1 Digital Input 0 = Ok, 1 = at least one voltage above threshold
Status Base V1.2 PrsPTOV2_Op_general Voltage presence indication instance 2 Digital Input 0 = Ok, 1 = at least one voltage above threshold
Base V1.2 NeutPTOV1_Op_general Voltage neutral deplacement indication 1 Digital Input 0 = Ok, 1 = neutral voltage above threshold
16 NT00391-09
SC150
Base V1.3 MainCSWI1_Loc_stVal Switch controller local / remote Digital Input 0 = Inactive, 1 = Command in progress
Base V1.4 LLN0_Health_stVal_Warn Module health warning Digital Input 0 = Ok, 1 = Warning
Main switch block open operation - status
Base V1.4 MainXSWI1_BlkOpn_stVal Digital Input
only
Main switch block close operation - status
Base V1.4 MainXSWI1_BlkCls_stVal Digital Input
only
Base V1.4 SimCSWI1_Pos_stVal Simulated switch position status feedback DB Digital Input 0 = intermediate-state, 1 =off, 2= on, 3 = bad-state
Base V1.4 SecGAPC1_SeqStr_stVal Sectionalizer sequence started Digital Input
Status
Base V1.4 SecGAPC1_IntrCnt_stVal Sectionalizer fault interruption count Counter
Base V1.4 SecGAPC1_Pos_stVal Switch position requested by sectionalizer DB Digital Input
Base V1.4 GenSFPI1_FltBlk_stVal Fault present - block automatic switching Digital Input 0 = normal, 1 = fault detected
Base V1.4 FltPTRC1_Str_general Fault detection pickup Digital Input 0 = ignored, 1 = start logging
Base V1.4 VPTRC1_Str_general Voltage event pickup Digital Input
Base V1.4 RDRE1_RcdStr_stVal Disturbance recording started Digital Input
PQ V1.4 PQS_PTRC1_Str_general Power quality event pickup Digital Input
Base V1.6 SEfSFPI1_FltInd_general Sensitive earth fault detected Digital Input 0 = normal, 1 = fault detected
Base V1.6 SecGAPC1_LnEna_setVal Sectionalizer automation enabled status Digital Input 0= Deactivated, 1 = Activated
NT00391-09 17
Internal
SC150
Type d'objet
SCADA
Voltage absence indication instance 1 phase
Base V2.7 AbsPTUV1_Op_phsA Digital Input
A 0 = Ok, 1 = voltage below threshold
Base V2.7 AbsPTUV1_Op_phsB Digital Input
B 0 = Ok, 1 = voltage below threshold
Base V2.7 AbsPTUV1_Op_phsC Digital Input
C 0 = Ok, 1 = voltage below threshold
Voltage presence indication instance 1
Base V2.7 PrsPTOV1_Op_phsA Digital Input
phase A 0 = Ok, 1 = voltage above threshold
Base V2.7 PrsPTOV1_Op_phsB Digital Input
phase B 0 = Ok, 1 = voltage above threshold
Base V2.7 PrsPTOV1_Op_phsC Digital Input
phase C 0 = Ok, 1 = voltage above threshold
Base V2.7 AbsPTUV2_Op_phsA Digital Input
A 0 = Ok, 1 = voltage below threshold
Base V2.7 AbsPTUV2_Op_phsB Digital Input
B 0 = Ok, 1 = voltage below threshold
Base V2.7 AbsPTUV2_Op_phsC Digital Input
C 0 = Ok, 1 = voltage below threshold
Base V2.7 PrsPTOV2_Op_phsA Digital Input
phase A 0 = Ok, 1 = voltage above threshold
Base V2.7 PrsPTOV2_Op_phsB Digital Input
phase B 0 = Ok, 1 = voltage above threshold
Status Base V2.7 PrsPTOV2_Op_phsC Digital Input
phase C 0 = Ok, 1 = voltage above threshold
Base V2.7 PDOP1_Str_general Overpower start Digital Input
Base V2.7 PDOP1_Op_general Overpower operate Digital Input
Base V2.7 PDOP1_FltInd_general Overpower indication Digital Input
Base V2.7 PDOP1_Prs_dGen_Fwd Positive active power (forward direction) Digital Input
Base V2.7 PDOP1_Prs_dGen_Bwd Negative active power (reverse direction) Digital Input
1 means earth switch wiring configured for "earth switch +
Base V2.8 DisXSWI1_LnEna_stVal Disconnector switch configured Digital Input
disconnector"
Base V2.8 DisXSWI1_Pos_stVal Disconnector switch position DB Digital Input 0 = intermediate-state, 1 =off, 2= on, 3 = bad-state
Base V2.8 EfPTOC1_Op_general Earth fault detection instance 1 operate Digital Input
Directional Phase fault detection instance 1
Base V2.8 DPhPTOC1_Op_general Digital Input
operate
Directional Phase fault detection instance 2
Base V2.8 DPhPTOC2_Op_general Digital Input
operate
Base V2.8 SEfPTOC1_Op_general Sensitive earth fault detection operate Digital Input
Directional Earth fault detection instance 1
Base V2.8 DEfPTOC1_Op_general Digital Input
operate
18 NT00391-09
SC150
Type d'objet
SCADA
Directional Earth fault detection instance 2
Base V2.8 DEfPTOC2_Op_general Digital Input
operate
Base V2.8 RDRE1_RcdMade_stVal Recording made Digital Input
Base V2.9 LPHD1_MemHealth_stVal_Warn Memory health status Digital Input
Base V2.9 FeaGGIO1_Ind1_stVal Digital input 1 - main switch open Digital Input 0 = input inactive, 1 = input active
Base V2.9 FeaGGIO1_Ind2_stVal Digital input 2 - main switch closed Digital Input 0 = input inactive, 1 = input active
NT00391-09 19
Internal
SC150
Base V0.4 MainCSWI1_PosCtlVal_stVal Switch position requested via Head Unit DB Digital Output 0 = ignored, 1 =off, 2= on
Only applies if command is in progress
Base V0.4 MainCSWI1_EnaOp_stVal Enable operation from Head Unit Digital Output
0 = block operation, 1 = enable operation
Only applies if command is in progress
Base V0.4 MainCSWI1_BlkOp_stVal Block operation from Head Unit Digital Output
0 = allow operation, 1 = block operation
Base V0.4 MainXSWI1_OpCntRs_stVal Number of operations preset Counter Preset 0 -> 2147483647
Base V0.4 SimCSWI1_PosCtlVal_stVal Simulated switch position control DB Digital Output 0 = ignored, 1 =off, 2 = on
Switch position requested from Head Unit
Base V0.4 GenGAPC1_PosCtlVal_stVal DB Digital Output 0 = ignored, 1 =off, 2 = on
automation
General transient fault counter reset
Base V0.4 GenSFPI1_TrFltCntRs_stVal Counter Preset 0 -> 2147483647
command
General semi-permanent fault counter
Base V0.4 GenSFPI1_SpFltCntRs_stVal Counter Preset 0 -> 2147483647
reset command
General permanent fault counter reset
Base V0.4 GenSFPI1_PmFltCntRs_stVal Counter Preset 0 -> 2147483647
command
Phase transient fault counter preset
Base V0.4 PhSFPI1_TrFltCntRs_stVal Counter Preset 0 -> 2147483647
command
Phase semi-permanent fault counter
Base V0.4 PhSFPI1_SpFltCntRs_stVal Counter Preset 0 -> 2147483647
preset command
Phase permanent fault counter preset
Base V0.4 PhSFPI1_PmFltCntRs_stVal Counter Preset 0 -> 2147483647
command
Command Earth transient fault counter preset
Base V0.4 EfSFPI1_TrFltCntRs_stVal Counter Preset 0 -> 2147483647
command
Earth semi-permanent fault counter preset
Base V0.4 EfSFPI1_SpFltCntRs_stVal Counter Preset 0 -> 2147483647
command
Earth permanent fault counter preset
Base V0.4 EfSFPI1_PmFltCntRs_stVal Counter Preset 0 -> 2147483647
command
Cross-country semi-permanent fault
Base V0.4 XcSFPI1_SpFltCntRs_stVal Counter Preset 0 -> 2147483647
counter preset command
Cross-country permanent fault counter
Base V0.4 XcSFPI1_PmFltCntRs_stVal Counter Preset 0 -> 2147483647
preset command
Base V0.4 LLN0_ActSG1_stVal Module select settings group 1 Digital Output 0 = ignored, 1 = select settings group 1
Base V1.4 RDRE1_RcdTrg_stVal Trigger recording command Digital Output
Base V1.6 EfPTOC1_LnEna_setVal Earth fault detection instance 1 enabled Boolean Setting
Base V1.6 SEfPTOC1_LnEna_setVal Sensitive earth fault detection enabled Boolean Setting
Fast ATS mode enabled - trip for under-
Base V2.8 GenGAPC1_HiSpdEna_stVal Digital Output 0 = ignored, 1 =off, 2= on
voltage on active source
Sectionalizer automation enable blocked
Base V2.9 SecGAPC1_BlkEna_setVal Digital Output 0 = deactivated, 1 = activated
(module used by ATS)
20 NT00391-09
SC150
CoreDb type/ Option Software/ Point name/ Point description/ SCADA Object Unit/ Unité Range Min/ Range Max/ Scale/ Default/
Type CoreDb Logiciel Nom de la donnée Description de la donnée Type/ Valeur min Valeur Max Echelle Par défaut
Type d'objet SCADA
Base V0.4 PMr_MMXU1_A_phsA RMS current phase A Analogue Input A
Base V0.4 PMr_MMXU1_A_phsB RMS current phase B Analogue Input A
Base V0.4 PMr_MMXU1_A_phsC RMS current phase C Analogue Input A
RMS current residual
Base V0.4 PMr_MMXU1_A_res Analogue Input A
(measured or calculated)
Base V0.4 PMr_MMXN1_Amp_mag Analogue Input A
(measured)
Base V0.4 PMr_MMXU1_AvAPhs_mag Mean RMS phase current Analogue Input A
Base V0.4 PMr_MMXU1_PhV_phsA RMS voltage phase A Analogue Input V
Base V0.4 PMr_MMXU1_PhV_phsB RMS voltage phase B Analogue Input V
Base V0.4 PMr_MMXU1_PhV_phsC RMS voltage phase C Analogue Input V
RMS voltage neutral
Base V0.4 PMr_MMXU1_PhV_neut Analogue Input V
(calculated)
Base V0.4 PMr_MMXU1_AvPhVPhs_mag Mean RMS voltage phase-N Analogue Input V
Base V0.4 PMr_MMXU1_Hz_mag Frequency Analogue Input Hz
(calculated)
Base V1.0 PMi_MMXU1_PhV_phsA Voltage indication phase A % Analogue Input %
Analog
Base V1.0 PMi_MMXU1_PhV_phsB Voltage indication phase B % Analogue Input %
Base V1.0 PMi_MMXU1_PhV_phsC Voltage indication phase C % Analogue Input %
Base V1.0 PMi_MMXU1_AvPhVPhs_mag Mean voltage indication % Analogue Input %
RMS voltage phase A to phase
Base V1.0 PMr_MMXU1_PPV_phsAB Analogue Input V
B
RMS voltage phase B to phase
Base V1.0 PMr_MMXU1_PPV_phsBC Analogue Input V
C
RMS voltage phase C to phase
Base V1.0 PMr_MMXU1_PPV_phsCA Analogue Input V
A
Mean RMS voltage between
Base V1.0 PMr_MMXU1_AvPPVPhs_mag Analogue Input V
phases
Base V1.0 PMr_MMXU1_W_phsA P Real power, phase A Analogue Input W
PM V1.0 PMr_MMXU1_W_phsB P Real power, phase B Analogue Input W
PM V1.0 PMr_MMXU1_W_phsC P Real power, phase C Analogue Input W
PM V1.0 PMr_MMXU1_TotW_mag P Real power, total Analogue Input W
PM V1.0 PMr_MMXU1_VAR_phsA Q Reactive power, phase A Analogue Input VAr
PM V1.0 PMr_MMXU1_VAR_phsB Q Reactive power, phase B Analogue Input VAr
PM V1.0 PMr_MMXU1_VAR_phsC Q Reactive power, phase C Analogue Input VAr
NT00391-09 21
Internal
SC150
Type d'objet SCADA
PM V1.0 PMr_MMXU1_TotVAr_mag Q Reactive power, total Analogue Input VAr
PM V1.0 PMr_MMXU1_VA_phsA S Apparent power, phase A Analogue Input VA
PM V1.0 PMr_MMXU1_VA_phsB S Apparent power, phase B Analogue Input VA
PM V1.0 PMr_MMXU1_VA_phsC S Apparent power, phase C Analogue Input VA
PM V1.0 PMr_MMXU1_TotVA_mag S Apparent power, total Analogue Input VA
PM V1.0 PMr_MMXU1_PF_phsA Power factor, phase A Analogue Input
PM V1.0 PMr_MMXU1_PF_phsB Power factor, phase B Analogue Input
PM V1.0 PMr_MMXU1_PF_phsC Power factor, phase C Analogue Input
PM V1.0 PMr_MMXU1_TotPF_mag True power factor, total Analogue Input
PM V1.0 T00MMTR1_TotWh_actVal Total net active energy Analogue Input Wh
PM V1.0 T00MMTR1_TotVArh_actVal Total net reactive energy Analogue Input VArh
PM V1.0 T00MMTR1_TotVAh_actVal Total net apparent energy Analogue Input VAh
PM V1.0 T00MMTR1_SupWh_actVal Net real energy supplied Analogue Input Wh
PM V1.0 T00MMTR1_SupVArh_actVal Net reactive energy supplied Analogue Input VArh
PM V1.0 T00MMTR1_DmdWh_actVal Net real energy demand Analogue Input Wh
PM V1.0 T00MMTR1_DmdVArh_actVal Net reactive energy demand Analogue Input VArh
Analog
Positive reactive energy
PM V1.0 T00MMTR1_SupVArhPs_actVal Analogue Input VArh
supplied
Negative reactive energy
PM V1.0 T00MMTR1_SupVArhNg_actVal Analogue Input VArh
supplied
PM V1.0 T00MMTR1_DmdVArhPs_actVal Analogue Input VArh
demand
PM V1.0 T00MMTR1_DmdVArhNg_actVal Analogue Input VArh
demand
PM V1.0 PhAMMTN1_TotWh_actVal Net real energy, phase A Analogue Input Wh
PM V1.0 PhAMMTN1_TotVArh_actVal Net reactive energy, phase A Analogue Input VArh
PM V1.0 PhAMMTN1_TotVAh_actVal Net apparent energy, phase A Analogue Input VAh
PM V1.0 PhBMMTN1_TotWh_actVal Net real energy, phase B Analogue Input Wh
PM V1.0 PhBMMTN1_TotVArh_actVal Net reactive energy, phase B Analogue Input VArh
PM V1.0 PhBMMTN1_TotVAh_actVal Net apparent energy, phase B Analogue Input VAh
PM V1.0 PhCMMTN1_TotWh_actVal Net real energy, phase C Analogue Input Wh
PM V1.0 PhCMMTN1_TotVArh_actVal Net reactive energy, phase C Analogue Input VArh
PM V1.0 PhCMMTN1_TotVAh_actVal Net apparent energy, phase C Analogue Input VAh
RMS voltage phase A, 10
PQ V1.0 PQS2MMXU1_PhV_phsA Analogue Input V
minute period
22 NT00391-09
SC150
Type d'objet SCADA
RMS voltage phase B, 10
PQ V1.0 PQS2MMXU1_PhV_phsB Analogue Input V
minute period
RMS voltage phase C, 10
PQ V1.0 PQS2MMXU1_PhV_phsC Analogue Input V
minute period
RMS voltage neutral
PQ V1.0 PQS2MMXU1_PhV_neut Analogue Input V
(calculated), 10 minute period
Mean RMS voltage phase-N,
PQ V1.0 PQS2MMXU1_AvPhVPhs_mag Analogue Input V
10 minute period
RMS voltage phase A, 2 hour
period
RMS voltage phase B, 2 hour
period
RMS voltage phase C, 2 hour
period
RMS voltage neutral
(calculated), 2 hour period
Mean RMS voltage phase-N, 2
hour period
Current negative sequence
PQ V1.0 PQS1MSQI1_ImbNgA_mag imbalance (I2 / I1), 150/180 Analogue Input %
cycle period
Analog Current negative sequence
PQ V1.0 PQS2MSQI1_ImbNgA_mag imbalance (I2 / I1), 10 minute Analogue Input %
period
PQ V1.0 PQS3MSQI1_ImbNgA_mag imbalance (I2 / I1), 2 hour Analogue Input %
period
Voltage negative sequence
PQ V1.0 PQS1MSQI1_ImbNgV_mag imbalance (V2 / V1), 150/180 Analogue Input %
cycle period
PQ V1.0 PQS2MSQI1_ImbNgV_mag imbalance (V2 / V1), 10 minute Analogue Input %
period
PQ V1.0 PQS3MSQI1_ImbNgV_mag imbalance (V2 / V1), 2 hour Analogue Input %
period
PQ V1.0 PQS_QVVR1_VVa_mag Last voltage variation value Analogue Input V
PQ V1.0 PQS_QVVR1_VvaTm_mag Last voltage variation duration Analogue Input s
1 = phase A, 2 = phase B, 4 = phase C
Last voltage variation affected
PQ V1.0 PQS_QVVR1_AffPhs_stVal Analogue Input 3 = phase A and B, 5 = phase A and C
phases
6 = phase B and C, 7 = phases A, B, C
Last RMS current phase A
Base V1.1 PreFltMMXU1_A_phsA Analogue Input A
before fault
NT00391-09 23
Internal
SC150
Type d'objet SCADA
Last RMS current phase B
Base V1.1 PreFltMMXU1_A_phsB Analogue Input A
before fault
Last RMS current phase C
Base V1.1 PreFltMMXU1_A_phsC Analogue Input A
before fault
Last RMS current residual
Base V1.1 PreFltMMXU1_A_res Analogue Input A
before fault
Last mean RMS phase current
Base V1.1 PreFltMMXU1_AvAPhs_mag Analogue Input A
before fault
Last RMS voltage phase A
Base V1.1 PreFltMMXU1_PhV_phsA Analogue Input V
before fault
Last RMS voltage phase B
Base V1.1 PreFltMMXU1_PhV_phsB Analogue Input V
before fault
Last RMS voltage phase C
Base V1.1 PreFltMMXU1_PhV_phsC Analogue Input V
before fault
Last RMS voltage neutral
Base V1.1 PreFltMMXU1_PhV_neut Analogue Input V
before fault
Last mean RMS phase voltage
Base V1.1 PreFltMMXU1_AvPhVPhs_mag Analogue Input V
before fault
PM V1.1 PMa_MMXU1_A_phsA Average current phase A Analogue Input A
PM V1.1 PMa_MMXU1_A_phsB Average current phase B Analogue Input A
Analog PM V1.1 PMa_MMXU1_A_phsC Average current phase C Analogue Input A

Average current residual
PM V1.1 PMa_MMXU1_A_res Analogue Input A
(calculated)
Average current residual
PM V1.1 PMa_MMXU1_IoA_mag Analogue Input A
(measured)
Average of Mean current
PM V1.1 PMa_MMXU1_AvAPhs_mag Analogue Input A
phases A,B,C
PM V1.1 PMa_MMXU1_PhV_phsA Average voltage phase A Analogue Input V
PM V1.1 PMa_MMXU1_PhV_phsB Average voltage phase B Analogue Input V
PM V1.1 PMa_MMXU1_PhV_phsC Average voltage phase C Analogue Input V
Average voltage neutral
PM V1.1 PMa_MMXU1_PhV_neut Analogue Input V
(calculated)
Average of Mean voltage
PM V1.1 PMa_MMXU1_AvPhVPhs_mag Analogue Input V
phases A, B,C
Average P Real power, phase
PM V1.1 PMa_MMXU1_W_phsA Analogue Input W
A
PM V1.1 PMa_MMXU1_W_phsB Analogue Input W
B
PM V1.1 PMa_MMXU1_W_phsC Analogue Input W
C
PM V1.1 PMa_MMXU1_TotW_mag Average P Real power, total Analogue Input W
24 NT00391-09
SC150
Type d'objet SCADA
Average Q Reactive power,
PM V1.1 PMa_MMXU1_VAR_phsA Analogue Input VAr
phase A
PM V1.1 PMa_MMXU1_VAR_phsB Analogue Input VAr
phase B
PM V1.1 PMa_MMXU1_VAR_phsC Analogue Input VAr
phase C
PM V1.1 PMa_MMXU1_TotVAr_mag Analogue Input VAr
total
Average S Apparent power,
PM V1.1 PMa_MMXU1_VA_phsA Analogue Input VA
phase A
PM V1.1 PMa_MMXU1_VA_phsB Analogue Input VA
phase B
PM V1.1 PMa_MMXU1_VA_phsC Analogue Input VA
phase C
PM V1.1 PMa_MMXU1_TotVA_mag Analogue Input VA
total
Minimum of average of Mean
PM V1.1 PMndMMXU1_AvAPhs_mag RMS phase current, previous Analogue Input A
day
PM V1.1 PMnwMMXU1_AvAPhs_mag RMS phase current, previous Analogue Input A
Analog
week
PM V1.1 PMnmMMXU1_AvAPhs_mag RMS phase current, previous Analogue Input A
month
PM V1.1 PMnyMMXU1_AvAPhs_mag RMS phase current, previous Analogue Input A
year
Maximum of average of Mean
PM V1.1 PMxdMMXU1_AvAPhs_mag RMS phase current, previous Analogue Input A
day
PM V1.1 PMxwMMXU1_AvAPhs_mag RMS phase current, previous Analogue Input A
week
Voltage phase A total
PQ V1.1 PQS_MHAI1_ThdPhV_phsA Analogue Input %
harmonic distortion
Voltage phase B total
PQ V1.1 PQS_MHAI1_ThdPhV_phsB Analogue Input %
harmonic distortion
Voltage phase C total
PQ V1.1 PQS_MHAI1_ThdPhV_phsC Analogue Input %
harmonic distortion
Mean voltage total harmonic
PQ V1.1 PQS_MHAI1_AvThdPhV_mag Analogue Input %
distortion
NT00391-09 25
Internal
SC150
Type d'objet SCADA
Current phase A total harmonic
PQ V1.1 PQS_MHAI1_ThdA_phsA Analogue Input %
distortion
Current phase B total harmonic
PQ V1.1 PQS_MHAI1_ThdA_phsB Analogue Input %
distortion
Current phase C total
PQ V1.1 PQS_MHAI1_ThdA_phsC Analogue Input %
harmonic distortion
Mean current total harmonic
PQ V1.1 PQS_MHAI1_AvThdA_mag Analogue Input %
distortion
Voltage phase A harmonic 1 -
PQ V1.1 PQS_MHAI1_HPhV01_phsA_mag Analogue Input V
magnitude
Voltage phase B harmonic 1 -
PQ V1.1 PQS_MHAI1_HPhV01_phsB_mag Analogue Input V
magnitude
Voltage phase C harmonic 1 -
PQ V1.1 PQS_MHAI1_HPhV01_phsC_mag Analogue Input V
magnitude
Voltage neutral harmonic 1 -
PQ V1.1 PQS_MHAI1_HPhV01_neut_mag Analogue Input V
magnitude
Mean voltage harmonic 1 -
PQ V1.1 PQS_MHAI1_AvHPhV01_mag Analogue Input V
magnitude
PQ V1.1 PQS_MHAI1_HPhV01_phsA_ang Analogue Input deg
angle
PQ V1.1 PQS_MHAI1_HPhV01_phsB_ang Analogue Input deg
angle
Analog Voltage phase C harmonic 1 -
PQ V1.1 PQS_MHAI1_HPhV01_phsC_ang Analogue Input deg
angle
PQ V1.1 PQS_MHAI1_HPhV01_neut_ang Analogue Input deg
angle
PQ V1.1 PQS_MHAI1_HPhV02_phsA Voltage phase A harmonic 2 Analogue Input %
PQ V1.1 PQS_MHAI1_HPhV02_phsB Voltage phase B harmonic 2 Analogue Input %
PQ V1.1 PQS_MHAI1_HPhV02_phsC Voltage phase C harmonic 2 Analogue Input %
26 NT00391-09
SC150
Type d'objet SCADA
Analog PQ V1.1 PQS_MHAI1_HPhV11_phsB Voltage phase B harmonic 11 Analogue Input %
Current phase A harmonic 1 -
PQ V1.1 PQS_MHAI1_HA01_phsA_mag Analogue Input A
magnitude
NT00391-09 27
Internal
SC150
Type d'objet SCADA
Current phase B harmonic 1 -
PQ V1.1 PQS_MHAI1_HA01_phsB_mag Analogue Input A
magnitude
Current phase C harmonic 1 -
PQ V1.1 PQS_MHAI1_HA01_phsC_mag Analogue Input A
magnitude
Current residual harmonic 1 -
PQ V1.1 PQS_MHAI1_HA01_neut_mag Analogue Input A
magnitude
Mean current harmonic 1 -
PQ V1.1 PQS_MHAI1_AvHA01_mag Analogue Input A
magnitude
PQ V1.1 PQS_MHAI1_HA01_phsA_ang Analogue Input deg
angle
PQ V1.1 PQS_MHAI1_HA01_phsB_ang Analogue Input deg
angle
PQ V1.1 PQS_MHAI1_HA01_phsC_ang Analogue Input deg
angle
PQ V1.1 PQS_MHAI1_HA01_neut_ang Analogue Input deg
angle
PQ V1.1 PQS_MHAI1_HA02_phsA_mag Current phase A harmonic 2 Analogue Input %
PQ V1.1 PQS_MHAI1_HA02_phsB_mag Current phase B harmonic 2 Analogue Input %
PQ V1.1 PQS_MHAI1_HA02_phsC_mag Current phase C harmonic 2 Analogue Input %
PQ V1.1 PQS_MHAI1_HA03_phsA Current phase A harmonic 3 Analogue Input %
Analog PQ V1.1 PQS_MHAI1_HA03_phsB Current phase B harmonic 3 Analogue Input %
PQ V1.1 PQS_MHAI1_HA03_phsC Current phase C harmonic 3 Analogue Input %
PQ V1.1 PQS_MHAI1_HA04_phsB Current phase B harmonic 4 Analogue Input %
28 NT00391-09
SC150
Type d'objet SCADA
Analog
PQ V1.2 PQS2MHAI1_ThdPhV_phsA harmonic distortion - 10 Analogue Input %
minutes
PQ V1.2 PQS2MHAI1_ThdPhV_phsB harmonic distortion - 10 Analogue Input %
minutes
PQ V1.2 PQS2MHAI1_ThdPhV_phsC harmonic distortion - 10 Analogue Input %
minutes
NT00391-09 29
Internal
SC150
Type d'objet SCADA
PQ V1.2 PQS2MHAI1_AvThdPhV_mag Analogue Input %
distortion - 10 minutes
PQ V1.2 PQS3MHAI1_ThdPhV_phsA Analogue Input %
harmonic distortion - 2 hours
PQ V1.2 PQS3MHAI1_ThdPhV_phsB Analogue Input %
PQ V1.2 PQS3MHAI1_ThdPhV_phsC Analogue Input %
distortion - 2 hours
Current residual total harmonic
PQ V1.2 PQS_MHAI1_ThdA_res Analogue Input %
distortion
PQ V1.2 PQS2MHAI1_ThdA_phsA Analogue Input %
PQ V1.2 PQS2MHAI1_ThdA_phsB Analogue Input %
PQ V1.2 PQS2MHAI1_ThdA_phsC harmonic distortion - 10 Analogue Input %
minutes
PQ V1.2 PQS2MHAI1_ThdA_res Analogue Input %
Analog distortion - 10 minutes
PQ V1.2 PQS2MHAI1_AvThdA_mag Analogue Input %
PQ V1.2 PQS3MHAI1_ThdA_phsC Analogue Input %
PQ V1.2 PQS3MHAI1_ThdA_res Analogue Input %
PQ V1.2 PQS2MHAI1_HPhV01_phsA Analogue Input V
10 minutes
PQ V1.2 PQS2MHAI1_HPhV01_phsB Analogue Input V
10 minutes
PQ V1.2 PQS2MHAI1_HPhV01_phsC Analogue Input V
10 minutes
Mean voltage harmonic 1 –
PQ V1.2 PQS2MHAI1_AvHPhV01_mag Analogue Input V
10 minutes
30 NT00391-09
SC150
Type d'objet SCADA
For following variables, nn is a generic index for the harmonic, from 02 to 15, and X is a generic letter for the phase, A, B or C
Voltage phase X harmonic nn -
PQ V1.2 PQS2MHAI1_HPhVnn_phsX Analogue Input %
10 minutes
2 hours
2 hours
2 hours
Mean voltage harmonic 1 - 2
hours
2 hours
PQS_MHAI1_HAnn_res
PQ V1.2 Current residual harmonic nn Analogue Input %
(add « _mag » for nn=02)
PQ V1.2 PQS2MHAI1_HA01_phsA Analogue Input A
10 minutes
PQ V1.2 PQS2MHAI1_HA01_phsB Analogue Input A
10 minutes
PQ V1.2 PQS2MHAI1_HA01_phsC Analogue Input A
10 minutes
Analog
PQ V1.2 PQS2MHAI1_HA01_res Analogue Input A
10 minutes
Mean current harmonic 1 - 10
PQ V1.2 PQS2MHAI1_AvHA01_mag Analogue Input A
minutes
Current phase X harmonic nn -
PQ V1.2 PQS2MHAI1_HAnn_phsX Analogue Input %
10 minutes
Current residual harmonic nn -
PQ V1.2 PQS2MHAI1_HAnn_res Analogue Input %
10 minutes
2 hours
2 hours
2 hours
Current residual harmonic 1 - 2
PQ V1.2 PQS3MHAI1_HA01_res Analogue Input A
hours
hours
2 hours
2 hours
NT00391-09 31
Internal
SC150
Type d'objet SCADA
RMS voltage phase A, 150/180
cycles period
RMS voltage phase B, 150/180
cycles period
RMS voltage phase C,
150/180 cycles period
RMS voltage neutral
PQ V1.4 PQS1MMXU1_PhV_neut (calculated), 150/180 cycles Analogue Input V
period
150/180 cycles period
PQ V1.4 PQS4MMXU1_Hz_mag Frequency, 10 second period Analogue Input Hz
PQ V1.4 PQS_MHAI1_HPhVnn_phsX Voltage phase X harmonic nn Analogue Input %
Analog
10 minutes
Voltage phase X harmonic nn
– 2 hours
PQ V1.4 PQS_MHAI1_HAnn_phsX Current phase X harmonic nn Analogue Input %
PQ V1.4 PQS_MHAI1_HAnn_res Current residual harmonic nn Analogue Input %
10 minutes
10 minutes
PQ V1.4 PQS3MHAI1_HAnn_phs X Analogue Input %
2 hours
Current residual harmonic nn –
2 hours
SC150
CoreDb type/ Option Software/ Point name/ Point description/ SCADA Object Type/ Unit/ Unité Range Min/ Range Max/ Scale/ Default/
CM\Environment V1.6 MMET_EnvHum MV Cubicle relative humidity Analogue Input %
MV Cable connection phase A
CM\Thermal V1.6 PhASTMP_Tmp_mag Analogue Input °C
temperature
Analog MV Cable connection phase B
CM\Thermal V1.6 PhBSTMP_Tmp_mag Analogue Input °C
temperature
MV Cable connection phase C
CM\Thermal V1.6 PhCSTMP_Tmp_mag Analogue Input °C
temperature
32 NT00391-09
SC150
Base V2.7 FltMMXU1_A_phsA Fault current phase A Analogue Input A
Base V2.7 FltMMXU1_A_phsB Fault current phase B Analogue Input A
Base V2.7 FltMMXU1_A_phsC Fault current phase C Analogue Input A
Base V2.7 FltMMXU1_A_res Fault current residual Analogue Input A
Analog
Base V2.7 FltMMXU1_PhV_phsA Fault voltage phase A Analogue Input V
Base V2.7 FltMMXU1_PhV_phsB Fault voltage phase B Analogue Input V
Base V2.7 FltMMXU1_PhV_phsC Fault voltage phase C Analogue Input V
Base V2.7 FltMMXU1_PhV_neut Fault voltage neutral Analogue Input V
NT00391-09 33
Internal
3.3 SC160
The data points supported by the SC150 are also supported by the SC160. Please refer to chapter SC150 to consult the common variables.
The only exceptions are PDOP variables (PDOP1_Str_general, PDOP1_Op_general, PDOP1_FltInd_general, PDOP1_Prs_dGen_Fwd, PDOP1_Prs_dGen_Bwd) which are not supported by SC160.
The following data points are supported only by SC160.
SC160
Base V1.6 PhPTOC1_Op_general Phase fault detection instance 1 operate Digital Input
Base V1.6 PhPTOC1_Str_general Phase fault detection instance 1 start Digital Input
Base V1.6 EfPTOC1_Str_general Earth fault detection instance 1 start Digital Input
Base V1.6 DPhPTOC1_Op_general Directional Phase fault detection instance 1 operate Digital Input
Status
Base V1.6 DPhPTOC1_Str_general Directional Phase fault detection instance 1 start Digital Input
Base V1.6 DPhPTOC2_Op_general Directional Phase fault detection instance 2 operate Digital Input
Base V1.6 DPhPTOC2_Str_general Directional Phase fault detection instance 2 start Digital Input
Base V1.6 SEfPTOC1_Op_general Sensitive earth fault detection operate Digital Input
Base V1.6 SEfPTOC1_Str_general Sensitive earth fault detection start Digital Input
Base V1.6 DEfPTOC1_Op_general Directional Earth fault detection instance 1 operate Digital Input
Base V1.6 DEfPTOC1_Str_general Directional Earth fault detection instance 1 start Digital Input
Base V1.6 DEfPTOC2_Op_general Directional Earth fault detection instance 2 operate Digital Input
Base V1.6 DEfPTOC2_Str_general Directional Earth fault detection instance 2 start Digital Input
Base V1.6 GenPTRC1_Tr_general General fault detection trip Digital Input
Base V1.6 GenPTRC1_TrInd_stVal General fault detection, latched trip indicator Digital Input
Base V1.6 EfPTRC1_TrInd_stVal Earth fault detection, latched trip indicator Digital Input
Base V1.6 EfPTRC1_OpCnt_stVal Earth fault detection trip counter Counter
34 NT00391-09
SC160
Base V1.6 PhPTRC1_TrInd_stVal Phase fault detection, latched trip indicator Digital Input
Base V1.6 PhPTRC1_OpCnt_stVal Phase fault detection trip counter Counter
Base V1.6 GenPTRC1_LnEna_stVal Protection enabled for the module Digital Input
Cold Load Pickup inhibit - current absence
Base V2.7 ClpPTUC1_Str_general Digital Input
detected
Cold Load Pickup inhibit - current presence
Base V2.7 ClpPTOC1_Str_general Digital Input
detected
Base V2.7 PhPCLP1_Op_general Cold Load Pickup inhibit for phase faults active Digital Input
Base V2.7 EfPCLP1_Op_general Cold Load Pickup inhibit for earth faults active Digital Input
Cold Load Pickup inhibit for directional phase
Base V2.7 DPhPCLP1_Op_general Digital Input
faults active
Cold Load Pickup inhibit for directional earth faults
Base V2.7 DEfPCLP1_Op_general Digital Input
active
1 means earth switch wiring configured for "earth
Status Base V2.8 DisXSWI1_LnEna_stVal Disconnector switch configured Digital Input
switch + disconnector"
Base V2.8 DisXSWI1_Pos_stVal Disconnector switch position DB Digital Input 0 = intermediate-state, 1 =off, 2= on, 3 = bad-state
Base V2.8 LLN0_EditSG_stVal Module setting group for edits Analogue Input 0 means none, 1 or 2
Base V2.8.1 LoadPTOC1_Str_general Heavy load detected any phase Digital Input
Base V2.8.1 LoadPTOC1_Op_general Heavy load alarm Digital Input
Base V2.8.1 LoadPTOC2_Str_general Overload detected any phase Digital Input
Base V2.8.1 LoadPTOC2_Op_general Overload alarm Digital Input
Base V2.9 FeaGGIO1_Ind1_stVal Digital input 1 - main switch open Digital Input 0 = input inactive, 1 = input active
Base V2.9 FeaGGIO1_Ind2_stVal Digital input 2 - main switch closed Digital Input 0 = input inactive, 1 = input active
NT00391-09 35
Internal
SC160
CoreDb type/ Option Software/ Point name/ Point description/ SCADA Object Type/ Default Bit or enumeration Value
Base V1.6 GenPTRC1_TrIndRs_stVal Module reset latched trip indications Digital Output
Base V1.6 GenPTRC1_OpCntRs_stVal Module reset trip operation counters Digital Output
Base V2.7 LLN0_LEDRs_stVal Module reset trip and FPI indications Digital Output
Base V2.8 AbsPTUV1_LnEna_setVal Voltage absence 1 enabled Boolean Setting FALSE
Base V2.8 AbsPTUV2_LnEna_setVal Voltage absence 2 enabled Boolean Setting FALSE
Base V2.8 PrsPTOV1_LnEna_setVal Voltage presence 1 enabled Boolean Setting FALSE
Base V2.8 PrsPTOV2_LnEna_setVal Voltage presence 2 enabled Boolean Setting FALSE
Base V2.8 PhPTOC1_LnEna_setVal Phase fault detection instance 1 enabled Boolean Setting FALSE
Base V2.8 PhPTOC2_LnEna_setVal Phase fault detection instance 2 enabled Boolean Setting FALSE
Base V2.8 PhPTOC3_LnEna_setVal Phase fault detection instance 3 enabled Boolean Setting TRUE
Directional phase fault detection instance 1
Base V2.8 DPhPTOC1_LnEna_setVal Boolean Setting FALSE
enabled
Directional phase fault detection instance 2
Base V2.8 DPhPTOC2_LnEna_setVal Boolean Setting FALSE
enabled
Command Base V2.8 DEfPTOC1_LnEna_setVal Directional earth fault detection instance 1 enabled Boolean Setting FALSE
Base V2.8 DEfPTOC2_LnEna_setVal Directional earth fault detection instance 2 enabled Boolean Setting FALSE
Base V2.8 PhPTRC1_RefPhPTOC1_setVal Phase fault 1 enabled for tripping Boolean Setting TRUE
Base V2.8 EfPTRC1_RefEfPTOC1_setVal Earth fault 1 enabled for tripping Boolean Setting TRUE
Base V2.8 EfPTRC1_RefSEfPTOC1_setVal Sensitive earth fault 1 enabled for tripping Boolean Setting TRUE
Base V2.8 PhPTRC1_RefDPhPTOC1_setVal Directional phase fault 1 enabled for tripping Boolean Setting TRUE
Base V2.8 PhPTRC1_RefDPhPTOC2_setVal Directional phase fault 2 enabled for tripping Boolean Setting TRUE
Base V2.8 EfPTRC1_RefDEfPTOC1_setVal Directional earth fault 1 enabled for tripping Boolean Setting TRUE
Base V2.8 EfPTRC1_RefDEfPTOC2_setVal Directional earth fault 2 enabled for tripping Boolean Setting TRUE
Base V2.9 LPHD1_MemGdPct_mag Memory percentage of good blocks Digital Output 0 = deactivated, 1 = activated
SC160
Analog Base V2.8 FltMMXU1_ClcExp_stVal Fault event values ready Analogue Input
36 NT00391-09
SC160
CoreDb type/ Option Softwar Point name/ Point description/ SCADA Object Type/ Unit/ Unité Range Min/ Range Max/ Scale/ Default/
Type CoreDb e/ Nom de la donnée Description de la donnée Type d'objet SCADA Valeur min Valeur Max Echelle Par défaut
Logiciel
Base V2.8 TCTR1_PhPriARtg_setMag CT Phase primary rated current Integer Setting A 50 1250 500
CT Phase secondary rated
Base V2.8 TCTR1_PhSecARtg_setMag Integer Setting A 1 5 1
current
CT Core balance primary rated
Base V2.8 TCTR1_IoPriARtg_setMag Integer Setting A 50 1250 500
current
CT Core balance secondary
Base V2.8 TCTR1_IoSecARtg_setMag Integer Setting A 1 5 1
rated current
Primary rated voltage (phase-to-
Base V2.8 TVTR1_PriVRtg_setMag Float Setting V 3000 36000 20000
phase)
Secondary rated voltage (phase-
Base V2.8 TVTR1_SecVRtg_setMag Float Setting V 1 10 3,25
to-phase)
Voltage absence 1 threshold
Base V2.8 AbsPTUV1_StrValPct_setMag Float Setting % 10 100 30
setting as percentage of rating
Voltage absence 1 validation
Base V2.8 AbsPTUV1_OpDlTmms_setVal Integer Setting ms 0 300000 50
time setting
Voltage absence 2 threshold
Base V2.8 AbsPTUV2_StrValPct_setMag Float Setting % 10 100 30
Voltage absence 2 validation
Base V2.8 AbsPTUV2_OpDlTmms_setVal Integer Setting ms 0 300000 50
time setting
Voltage presence 1 threshold
Base V2.8 PrsPTOV1_StrValPct_setMag Float Setting % 20 200 70
Setpoint Voltage presence 1 validation
Base V2.8 PrsPTOV1_OpDlTmms_setVal Integer Setting ms 0 300000 50
time setting
Voltage presence 2 threshold
Base V2.8 PrsPTOV2_StrValPct_setMag Float Setting % 20 200 70
Voltage presence 2 validation
Base V2.8 PrsPTOV2_OpDlTmms_setVal Integer Setting ms 0 300000 50
time setting
Phase fault detection instance 1 DT: 4In
Base V2.8 PhPTOC1_StrVal_setMag Float Setting A 0.02 In 100
threshold setting IDMT: In
Phase fault detection instance 1 DT: 50 DT: 300000
Base V2.8 PhPTOC1_OpDlTmms_setVal Integer Setting ms 100
validation time setting IDMT: 100 IDMT: 12500
validation time setting IDMT: n/a IDMT: n/a
Directional phase fault detection DT: 4In
Base V2.8 DPhPTOC1_StrVal_setMag Float Setting A 0.1In 100
instance 1 threshold setting IDMT: In
Directional phase fault detection DT: 100 DT: 300000
Base V2.8 DPhPTOC1_OpDlTmms_setVal Integer Setting ms 100
instance 1 validation time setting IDMT: 100 IDMT: 12500
SC160
NT00391-09 37
Internal
Directional phase fault
DT: 4In
Base V2.8 DPhPTOC2_StrVal_setMag detection instance 2 threshold Float Setting A 0.1In 100
IDMT: In
setting
Directional phase fault
DPhPTOC2_OpDlTmms_setVa DT: 100 DT: 300000
Base V2.8 detection instance 2 validation Integer Setting ms 100
l IDMT: 100 IDMT: 12500
time setting
Ires: 0.008 In DT: 1.6In
Earth fault detection instance 1
Base V2.8 EfPTOC1_StrVal_setMag Float Setting A Ino: 0.008 1.6 Ino 100
threshold setting
Ino IDMT: In, Ino
Earth fault detection instance 1 DT: 50 DT: 300000
Base V2.8 EfPTOC1_OpDlTmms_setVal Integer Setting ms 100
threshold setting
Ino IDMT: In, Ino
threshold setting
Ino IDMT: In, Ino
Setpoint
Sensitive earth fault detection
Base V2.8 SEfPTOC1_StrVal_setMag Float Setting A Ino: 0.008 1.6 Ino 100
threshold setting
Ino IDMT: In, Ino
Sensitive earth fault detection DT: 0 DT: 300000
Base V2.8 SEfPTOC1_OpDlTmms_setVal Integer Setting ms 100
Directional earth fault detection
SC150: 1
Base V2.8 DEfPTOC1_StrVal_setMag instance 1 current threshold Float Setting A 0.008 In 3.5 In
SC160: In
setting
Base V2.8 DEfPTOC1_OpDlTmms_setVal instance 1 validation time Integer Setting ms 50 300000 100
setting
Base V2.8 DEfPTOC2_StrVal_setMag instance 2 current threshold Float Setting A 1 1 1
setting
Base V2.8 DEfPTOC2_OpDlTmms_setVal instance 2 validation time Integer Setting ms 50 300000 100
setting
38 NT00391-09
PowerLogic T300 Database LV150
3.4 LV150
LV150
Base V1.0 PMr_MMXU1_QDetCodA_mag Quality detail code for current Analogue Input 0 = Good, 1 = Invalid, 3= Questionable
11 = Questionable due to out-of-range, 65 = Invalid
Base V1.0 PMr_MMXU1_QDetCodV_mag Quality detail code for voltage Analogue Input due to ADC Failure, 515 = Questionable and
Inaccurate on start-up"
Base V1.0 LCCH1_ChLiv_stVal Module communication active status Digital Input
Base V1.0 LLN0_Health_stVal_Fail Module health error Digital Input 0 = No communications, 1 = communications ok
Base V1.0 LLN0_CfgHealth_stVal_Warn Configuration health Digital Input 0 = Ok, 1 = Error
Base V1.0 LPHD1_PhyHealth_stVal_Fail Module physical health error Digital Input 0 = Ok, 1 = Warning
Base V1.0 LTMS1_TmSynErr_stVal Time not synchronised Digital Input 0 = Ok, 1 = Error
Base V1.0 LTMS1_TmChErr_stVal Time synchronisation source failure Digital Input 0 = Ok, 1 = Error
Base V1.0 LTMS2_TmChErr_stVal 1Hz time signal unstable Digital Input 0 = Ok, 1 = Error
Base V1.0 LTMS2_TmSynErr_stVal 1Hz time signal not synchronised (IEEE1588) Digital Input 0 = Ok, 1 = Error
Base V1.0 LTMS2_OfsTmns_stVal Offset from master clock Analogue Input 0 = Ok, 1 = Error
Base V1.0 LCCH2_InOv_stVal Internal communications sampled values lost Digital Input
Module communications analog measurement
Base V1.0 LCCH1_MvOutOv_stVal DB Digital Input 0 = Ok, 1 = Warning
events lost
Base V1.0 LCCH1_SpOutOv_stVal Module communications status events lost DB Digital Input 0 = Ok, 1 = Warning
Status
Base V1.0 LCCH1_CntOutOv_stVal Module communications counter events lost DB Digital Input 0 = Ok, 1 = Warning
0= Sensor is connected and working properly
Base V1.0 InstSTMP1_Health_stVal_Fail Temperature 1: sensor error Digital Input
1= Sensor is disconnected or is faulty
0 = all voltages above threshold, 1 = at least 1 phase
Base V1.0 SvSVPI1_Abs_general Voltage absence for all phases Digital Input
voltage below threshold
0 = at least 1 phase voltage below threshold, 1 = all
Base V1.0 SvSVPI1_Prs_general Voltage presence for all phases Digital Input
phase voltages above threshold
0 = voltage absent, 1 = voltage present. Copy of
Base V1.0 LvSVPI1_Prs_general Voltage presence for HMI – at least one phase Digital Input
"Voltage presence from measured values"
Base V1.0 LLN0_ActSG_stVal Active settings group Analogue Input 1 or 2
0 = normal, 1 = current unbalance is greater than
PQ V1.0 PQS_QIUB1_VaStr_stVal Current unbalance variation indication Digital Input
threshold
0 = normal, 1 = voltage unbalance is greater than
PQ V1.0 PQS_QVUB1_VaStr_stVal Voltage unbalance variation indication Digital Input
threshold
NT00391-09 39
Internal
LV150
PQ V1.0 PQS_QIUB1_VaEvtCnt_stVal Current unbalance variation event counter Counter
PQ V1.0 PQS_QVUB1_VaEvtCnt_stVal Voltage unbalance variation event counter Counter
PQ V1.0 PQS_QVVR1_DipStr_stVal Voltage dip indication Digital Input 0 = normal, 1 = dip in progress
PQ V1.0 PQS_QVVR1_SwlStr_stVal Voltage swell indication Digital Input 0 = normal, 1 = swell in progress
PQ V1.0 PQS_QVVR1_IntrStr_stVal Voltage interruption indication Digital Input 0 = normal, 1 = interruption in progress
Short duration voltage dip event count,
PQ V1.0 PQS_QVVR1_DipEvtCnt2_stVal Medium duration voltage dip event count Counter
Long duration voltage dip event count,
Short duration voltage swell event count,
PQ V1.0 PQS_QVVR1_SwlEvtCnt2_stVal Medium duration voltage swell event count Counter
Status Long duration voltage swell event count,
PQ V1.0 PQS_QVVR1_IntrEvtCnt1_stVal Short interruption counter Counter
PQ V1.0 PQS_QVVR1_IntrEvtCnt2_stVal Long interruption counter Counter
Base V1.3 LLN0_Health_stVal_Warn Module health warning Digital Input 0 = Ok, 1 = Warning
40 NT00391-09
LV150
Type d'objet
SCADA
Base V2.7 AbsPTUV1_Op_phsA Voltage absence indication instance 1 phase A Digital Input 0 = Ok, 1 = voltage below threshold
Base V2.7 AbsPTUV1_Op_phsB Voltage absence indication instance 1 phase B Digital Input 0 = Ok, 1 = voltage below threshold
Base V2.7 AbsPTUV1_Op_phsC Voltage absence indication instance 1 phase C Digital Input 0 = Ok, 1 = voltage below threshold
Base V2.7 PrsPTOV1_Op_phsA Voltage presence indication instance 1 phase A Digital Input 0 = Ok, 1 = voltage above threshold
Base V2.7 PrsPTOV1_Op_phsB Voltage presence indication instance 1 phase B Digital Input 0 = Ok, 1 = voltage above threshold
Base V2.7 PrsPTOV1_Op_phsC Voltage presence indication instance 1 phase C Digital Input 0 = Ok, 1 = voltage above threshold
Status Base V2.7 AbsPTUV2_Op_phsA Voltage absence indication instance 2 phase A Digital Input 0 = Ok, 1 = voltage below threshold
Base V2.7 AbsPTUV2_Op_phsB Voltage absence indication instance 2 phase B Digital Input 0 = Ok, 1 = voltage below threshold
Base V2.7 AbsPTUV2_Op_phsC Voltage absence indication instance 2 phase C Digital Input 0 = Ok, 1 = voltage below threshold
Base V2.7 PrsPTOV2_Op_phsA Voltage presence indication instance 2 phase A Digital Input 0 = Ok, 1 = voltage above threshold
Base V2.7 PrsPTOV2_Op_phsB Voltage presence indication instance 2 phase B Digital Input 0 = Ok, 1 = voltage above threshold
Base V2.7 PrsPTOV2_Op_phsC Voltage presence indication instance 2 phase C Digital Input 0 = Ok, 1 = voltage above threshold
LV150
CoreDb type/ Option Software/ Point name/ Point description/ SCADA Object Unit/Unité Range Min/ Range Max/ Scale/ Default/
Type d'objet SCADA
Analogue Input for
Status Base V1.0 PMa_MMXU1_ClcIntvPer_setVal Calculation Interval Period min 1 60 10
Integer Setting
NT00391-09 41
Internal
LV150
Command
42 NT00391-09
LV150
Type d'objet SCADA
Base V1.0 PMr_MMXU1_A_phsA RMS current phase A Analogue Input A
Base V1.0 PMr_MMXU1_A_phsB RMS current phase B Analogue Input A
Base V1.0 PMr_MMXU1_A_phsC RMS current phase C Analogue Input A
RMS current neutral
Base V1.0 PMr_MMXU1_A_res Analogue Input A
(measured or calculated)
RMS current neutral
(measured)
RMS current neutral
(calculated)
Base V1.0 PMr_MMXU1_AvAPhs_mag Mean RMS phase current Analogue Input A
Base V1.0 PMr_MMXU1_PhV_phsA RMS voltage phase A Analogue Input V
Base V1.0 PMr_MMXU1_PhV_phsB RMS voltage phase B Analogue Input V
Base V1.0 PMr_MMXU1_PhV_phsC RMS voltage phase C Analogue Input V
RMS voltage neutral
Base V1.0 PMr_MMXU1_PhV_neut Analogue Input V
(calculated)
Base V1.0 PMr_MMXU1_AvPhVPhs_mag Mean RMS voltage phase-N Analogue Input V
Base V1.0 PMr_MMXU1_Hz_mag Frequency Analogue Input Hz
Analog Base V1.0 PMi_MMXU1_PhV_phsA Voltage indication phase A % Analogue Input %
Base V1.0 PMi_MMXU1_PhV_phsB Voltage indication phase B % Analogue Input %
Base V1.0 PMi_MMXU1_PhV_phsC Voltage indication phase C % Analogue Input %
Base V1.0 PMi_MMXU1_AvPhVPhs_mag Mean voltage indication % Analogue Input %
Base V1.0 PMr_MMXU1_W_phsA P Real power, phase A Analogue Input W
Base V1.0 PMr_MMXU1_W_phsB P Real power, phase B Analogue Input W
Base V1.0 PMr_MMXU1_W_phsC P Real power, phase C Analogue Input W
Base V1.0 PMr_MMXU1_TotW_mag P Real power, total Analogue Input W
Base V1.0 PMr_MMXU1_VAR_phsA Q Reactive power, phase A Analogue Input VAr
Base V1.0 PMr_MMXU1_VAR_phsB Q Reactive power, phase B Analogue Input VAr
Base V1.0 PMr_MMXU1_VAR_phsC Q Reactive power, phase C Analogue Input VAr
Base V1.0 PMr_MMXU1_TotVAr_mag Q Reactive power, total Analogue Input VAr
Base V1.0 PMr_MMXU1_VA_phsA S Apparent power, phase A Analogue Input VA
Base V1.0 PMr_MMXU1_VA_phsB S Apparent power, phase B Analogue Input VA
Base V1.0 PMr_MMXU1_VA_phsC S Apparent power, phase C Analogue Input VA
Base V1.0 PMr_MMXU1_TotVA_mag S Apparent power, total Analogue Input VA
NT00391-09 43
Internal
LV150
Type d'objet SCADA
Base V1.0 PMr_MMXU1_PF_phsA Power factor, phase A Analogue Input
Base V1.0 PMr_MMXU1_PF_phsB Power factor, phase B Analogue Input
Base V1.0 PMr_MMXU1_PF_phsC Power factor, phase C Analogue Input
Base V1.0 PMr_MMXU1_TotPF_mag True power factor, total Analogue Input
RMS voltage phase A to phase
Base V1.0 PMr_MMXU1_PPV_phsAB Analogue Input V
B
RMS voltage phase B to phase
Base V1.0 PMr_MMXU1_PPV_phsBC Analogue Input V
C
RMS voltage phase C to phase
Base V1.0 PMr_MMXU1_PPV_phsCA Analogue Input V
A
Mean RMS voltage between
Base V1.0 PMr_MMXU1_AvPPVPhs_mag Analogue Input V
phases
Base V1.0 T00MMTR1_TotWh_actVal Total net active energy Analogue Input Wh
Base V1.0 T00MMTR1_TotVArh_actVal Total net reactive energy Analogue Input VArh
Base V1.0 T00MMTR1_TotVAh_actVal Total net apparent energy Analogue Input VAh
Base V1.0 T00MMTR1_SupWh_actVal Net real energy supplied Analogue Input Wh
Base V1.0 T00MMTR1_SupVArh_actVal Net reactive energy supplied Analogue Input VArh
Base V1.0 T00MMTR1_DmdWh_actVal Net real energy demand Analogue Input Wh
Analog
Base V1.0 T00MMTR1_DmdVArh_actVal Net reactive energy demand Analogue Input VArh
Base V1.0 T00MMTR1_SupVArhPs_actVal Analogue Input VArh
supplied
Base V1.0 T00MMTR1_SupVArhNg_actVal Analogue Input VArh
supplied
Base V1.0 T00MMTR1_DmdVArhPs_actVal Analogue Input VArh
demand
Base V1.0 T00MMTR1_DmdVArhNg_actVal Analogue Input VArh
demand
Base V1.0 PhAMMTN1_TotWh_actVal Net real energy, phase A Analogue Input Wh
Base V1.0 PhAMMTN1_TotVArh_actVal Net reactive energy, phase A Analogue Input VArh
Base V1.0 PhAMMTN1_TotVAh_actVal Net apparent energy, phase A Analogue Input VAh
Base V1.0 PhBMMTN1_TotWh_actVal Net real energy, phase B Analogue Input Wh
Base V1.0 PhBMMTN1_TotVArh_actVal Net reactive energy, phase B Analogue Input VArh
Base V1.0 PhBMMTN1_TotVAh_actVal Net apparent energy, phase B Analogue Input VAh
Base V1.0 PhCMMTN1_TotWh_actVal Net real energy, phase C Analogue Input Wh
Base V1.0 PhCMMTN1_TotVArh_actVal Net reactive energy, phase C Analogue Input VArh
Base V1.0 PhCMMTN1_TotVAh_actVal Net apparent energy, phase C Analogue Input VAh
44 NT00391-09
LV150
Type d'objet SCADA
Base V1.0 PMa_MMXU1_A_phsA Average current phase A Analogue Input A
Base V1.0 PMa_MMXU1_A_phsB Average current phase B Analogue Input A
Base V1.0 PMa_MMXU1_A_phsC Average current phase C Analogue Input A
Average current neutral
Base V1.0 PMa_MMXU1_A_res Analogue Input A
(calculated)
Average current neutral
Base V1.0 PMa_MMXU1_IoA_mag Analogue Input A
(measured)
Average of Mean current
Base V1.0 PMa_MMXU1_AvAPhs_mag Analogue Input A
phases A,B,C
Base V1.0 PMa_MMXU1_PhV_phsA Average voltage phase A Analogue Input V
Base V1.0 PMa_MMXU1_PhV_phsB Average voltage phase B Analogue Input V
Base V1.0 PMa_MMXU1_PhV_phsC Average voltage phase C Analogue Input V
Average voltage neutral
Base V1.0 PMa_MMXU1_PhV_neut Analogue Input V
(calculated)
Average of Mean voltage
Base V1.0 PMa_MMXU1_AvPhVPhs_mag Analogue Input V
phases A,B,C
Base V1.0 PMa_MMXU1_W_phsA Analogue Input W
A
Analog Average P Real power, phase
Base V1.0 PMa_MMXU1_W_phsB Analogue Input W
B
Base V1.0 PMa_MMXU1_W_phsC Analogue Input W
C
Base V1.0 PMa_MMXU1_TotW_mag Average P Real power, total Analogue Input W
Base V1.0 PMa_MMXU1_VAR_phsA Analogue Input VAr
phase A
Base V1.0 PMa_MMXU1_VAR_phsB Analogue Input VAr
phase B
Base V1.0 PMa_MMXU1_VAR_phsC Analogue Input VAr
phase C
Base V1.0 PMa_MMXU1_TotVAr_mag Analogue Input VAr
total
Base V1.0 PMa_MMXU1_VA_phsA Analogue Input VA
phase A
Base V1.0 PMa_MMXU1_VA_phsB Analogue Input VA
phase B
Base V1.0 PMa_MMXU1_VA_phsC Analogue Input VA
phase C
Base V1.0 PMa_MMXU1_TotVA_mag Analogue Input VA
total
NT00391-09 45
Internal
LV150
Type d'objet SCADA
Base V1.0 PMndMMXU1_AvAPhs_mag RMS phase current, previous Analogue Input A
day
Base V1.0 PMnwMMXU1_AvAPhs_mag RMS phase current, previous Analogue Input A
week
Base V1.0 PMnmMMXU1_AvAPhs_mag RMS phase current, previous Analogue Input A
month
Base V1.0 PMnyMMXU1_AvAPhs_mag RMS phase current, previous Analogue Input A
year
Base V1.0 PMxdMMXU1_AvAPhs_mag RMS phase current, previous Analogue Input A
day
Base V1.0 PMxwMMXU1_AvAPhs_mag RMS phase current, previous Analogue Input A
week
Base V1.0 PMxmMMXU1_AvAPhs_mag RMS phase current, previous Analogue Input A
month
Analog Base V1.0 PMxyMMXU1_AvAPhs_mag RMS phase current, previous Analogue Input A
year
Base V1.0 PMnmMMXU2_AvAPhs_mag Analogue Input A
RMS phase current, this month
Base V1.0 PMnyMMXU2_AvAPhs_mag Analogue Input A
RMS phase current, this year
Base V1.0 PMxmMMXU2_AvAPhs_mag Analogue Input A
RMS phase current, this month
Base V1.0 PMxyMMXU2_AvAPhs_mag Analogue Input A
RMS phase current, this year
Temperature 1: instantaneous
Base V1.0 InstSTMP1_Tmp_mag Analogue Input °C
value
Base V1.0 AvhSTMP1_Tmp_mag Temperature 1: hourly average Analogue Input °C
value
value
Last RMS voltage phase A
Base V1.0 PreFltMMXU1_PhV_phsA Analogue Input V
before fault
46 NT00391-09
LV150
Type d'objet SCADA
Last RMS voltage phase B
Base V1.0 PreFltMMXU1_PhV_phsB Analogue Input V
before fault
Last RMS voltage phase C
Base V1.0 PreFltMMXU1_PhV_phsC Analogue Input V
before fault
Last RMS voltage neutral
Base V1.0 PreFltMMXU1_PhV_neut Analogue Input V
before fault
Last mean RMS phase voltage
Base V1.0 PreFltMMXU1_AvPhVPhs_mag Analogue Input V
before fault
RMS voltage phase A, 10
minute period
RMS voltage phase B, 10
minute period
RMS voltage phase C, 10
minute period
RMS voltage neutral
(calculated), 10 minute period
10 minute period
RMS voltage phase A, 2 hour
period
RMS voltage phase B, 2 hour
Analog period
RMS voltage phase C, 2 hour
period
RMS voltage neutral
(calculated), 2 hour period
Mean RMS voltage phase-N, 2
hour period
PQ V1.0 PQS1MSQI1_ImbNgA_mag imbalance (I2 / I1), 150/180 Analogue Input %
cycle period
PQ V1.0 PQS2MSQI1_ImbNgA_mag imbalance (I2 / I1), 10 minute Analogue Input %
period
PQ V1.0 PQS3MSQI1_ImbNgA_mag imbalance (I2 / I1), 2 hour Analogue Input %
period
PQ V1.0 PQS1MSQI1_ImbNgV_mag imbalance (V2 / V1), 150/180 Analogue Input %
cycle period
PQ V1.0 PQS2MSQI1_ImbNgV_mag imbalance (V2 / V1), 10 minute Analogue Input %
period
NT00391-09 47
Internal
LV150
Type d'objet SCADA
PQ V1.0 PQS3MSQI1_ImbNgV_mag imbalance (V2 / V1), 2 hour Analogue Input %
period
PQ V1.0 PQS_QVVR1_VVa_mag Last voltage variation value Analogue Input V
PQ V1.0 PQS_QVVR1_VvaTm_mag Last voltage variation duration Analogue Input s
1 = phase A, 2 = phase B, 4 = phase C
Last voltage variation affected
PQ V1.0 PQS_QVVR1_AffPhs_stVal Analogue Input 3 = phase A and B, 5 = phase A and C
phases
6 = phase B and C, 7 = phases A, B, C"
PQ V1.0 PQS_MHAI1_ThdPhV_phsA Analogue Input %
harmonic distortion
PQ V1.0 PQS_MHAI1_ThdPhV_phsB Analogue Input %
harmonic distortion
PQ V1.0 PQS_MHAI1_ThdPhV_phsC Analogue Input %
harmonic distortion
PQ V1.0 PQS_MHAI1_AvThdPhV_mag Analogue Input %
distortion
PQ V1.0 PQS_MHAI1_ThdA_phsA Analogue Input %
distortion
PQ V1.0 PQS_MHAI1_ThdA_phsB Analogue Input %
distortion
Analog PQ V1.0 PQS_MHAI1_ThdA_phsC Analogue Input %
harmonic distortion
PQ V1.0 PQS_MHAI1_AvThdA_mag Analogue Input %
distortion
PQ V1.0 PQS_MHAI1_HPhV01_phsA_mag Analogue Input V
magnitude
PQ V1.0 PQS_MHAI1_HPhV01_phsB_mag Analogue Input V
magnitude
PQ V1.0 PQS_MHAI1_HPhV01_phsC_mag Analogue Input V
magnitude
PQ V1.0 PQS_MHAI1_HPhV01_neut_mag Analogue Input V
magnitude
Mean voltage harmonic 1 -
PQ V1.0 PQS_MHAI1_AvHPhV01_mag Analogue Input V
magnitude
PQ V1.0 PQS_MHAI1_HPhV01_phsA_ang Analogue Input deg
angle
PQ V1.0 PQS_MHAI1_HPhV01_phsB_ang Analogue Input deg
angle
PQ V1.0 PQS_MHAI1_HPhV01_phsC_ang Analogue Input deg
angle
PQ V1.0 PQS_MHAI1_HPhV01_neut_ang Analogue Input deg
angle
48 NT00391-09
LV150
Type d'objet SCADA
Analog PQ V1.0 PQS_MHAI1_HPhV07_phsB Voltage phase B harmonic 7 Analogue Input %
NT00391-09 49
Internal
LV150
Type d'objet SCADA
PQ V1.0 PQS_MHAI1_HA01_phsA_mag Analogue Input A
magnitude
PQ V1.0 PQS_MHAI1_HA01_phsB_mag Analogue Input A
magnitude
PQ V1.0 PQS_MHAI1_HA01_phsC_mag Analogue Input A
magnitude
Current neutral harmonic 1 -
PQ V1.0 PQS_MHAI1_HA01_neut_mag Analogue Input A
Analog magnitude
Mean current harmonic 1 -
PQ V1.0 PQS_MHAI1_AvHA01_mag Analogue Input A
magnitude
PQ V1.0 PQS_MHAI1_HA01_phsA_ang Analogue Input deg
angle
PQ V1.0 PQS_MHAI1_HA01_phsB_ang Analogue Input deg
angle
PQ V1.0 PQS_MHAI1_HA01_phsC_ang Analogue Input deg
angle
PQ V1.0 PQS_MHAI1_HA01_neut_ang Analogue Input deg
angle
PQ V1.0 PQS_MHAI1_HA02_phsA_mag Current phase A harmonic 2 Analogue Input %
PQ V1.0 PQS_MHAI1_HA02_phsB_mag Current phase B harmonic 2 Analogue Input %
PQ V1.0 PQS_MHAI1_HA02_phsC_mag Current phase C harmonic 2 Analogue Input %
50 NT00391-09
LV150
Type d'objet SCADA
Analog PQ V1.0 PQS_MHAI1_HA09_phsC Current phase C harmonic 9 Analogue Input %
NT00391-09 51
Internal
LV150
Type d'objet SCADA
PQ V1.1 PQS2MHAI1_ThdPhV_phsA harmonic distortion - 10 Analogue Input %
minutes
PQ V1.1 PQS2MHAI1_ThdPhV_phsB harmonic distortion - 10 Analogue Input %
minutes
PQ V1.1 PQS2MHAI1_ThdPhV_phsC harmonic distortion - 10 Analogue Input %
minutes
PQ V1.1 PQS3MHAI1_ThdPhV_phsA Analogue Input %
PQ V1.1 PQS3MHAI1_ThdPhV_phsB Analogue Input %
PQ V1.1 PQS3MHAI1_ThdPhV_phsC Analogue Input %
Analog Mean voltage total harmonic
Current neutral total harmonic
PQ V1.1 PQS_MHAI1_ThdA_neut Analogue Input %
distortion
PQ V1.1 PQS2MHAI1_ThdA_phsC harmonic distortion - 10 Analogue Input %
minutes
PQ V1.1 PQS2MHAI1_ThdA_neut Analogue Input %
PQ V1.1 PQS3MHAI1_ThdA_phsC Analogue Input %
PQ V1.1 PQS3MHAI1_ThdA_neut Analogue Input %
52 NT00391-09
LV150
Type d'objet SCADA
10 minutes
10 minutes
10 minutes
minutes
PQ V1.1 PQS2MHAI1_HPhVnn _phsX Analogue Input %
10 minutes
2 hours
2 hours
2 hours
hours
Analog 2 hours
PQS_MHAI1_HAnn_neut
PQ V1.1 Current neutral harmonic nn Analogue Input %
(add « _mag » for nn=02)
10 minutes
10 minutes
10 minutes
PQ V1.1 PQS2MHAI1_HA01_neut Analogue Input A
10 minutes
minutes
Current phaseX harmonic nn -
10 minutes
Current neutral harmonic nn -
PQ V1.1 PQS2MHAI1_HAnn_neut Analogue Input %
10 minutes
2 hours
2 hours
2 hours
NT00391-09 53
Internal
LV150
Type d'objet SCADA
Current neutral harmonic 1 - 2
PQ V1.1 PQS3MHAI1_HA01_neut Analogue Input A
hours
hours
Analog
2 hours
2 hours
SC150
Type d'objet SCADA
RMS voltage phase A, 150/180
PQ V1.3 Analogue Input V
PQS1MMXU1_PhV_phsA cycles period
RMS voltage phase B, 150/180
PQS1MMXU1_PhV_phsB cycles period
RMS voltage phase C,
PQS1MMXU1_PhV_phsC 150/180 cycles period
RMS voltage neutral
PQ V1.3 (calculated), 150/180 cycles Analogue Input V
PQS1MMXU1_PhV_neut period
PQS1MMXU1_AvPhVPhs_mag 150/180 cycles period
PQ V1.3 PQS4MMXU1_Hz_mag Frequency, 10 second period Analogue Input Hz
PQ V1.3 PQS_MHAI1_HPhVnn_phsX Voltage phase X harmonic nn Analogue Input %
Analog
10 minutes
Voltage phase X harmonic nn
– 2 hours
PQ V1.3 PQS_MHAI1_HAnn_phsX Current phase X harmonic nn Analogue Input %
PQ V1.3 PQS_MHAI1_HAnn_neut Current neutral harmonic nn Analogue Input %
10 minutes
10 minutes
2 hours
Current neutral harmonic nn –
2 hours
54 NT00391-09
LV150
LV Cable connection phase A
CM\Thermal V1.6 PhASTMP_Tmp_mag Analogue Input °C
temperature
LV Cable connection phase B
CM\Thermal V1.6 PhBSTMP_Tmp_mag Analogue Input °C
temperature
Analog
LV Cable connection phase C
CM\Thermal V1.6 PhCSTMP_Tmp_mag Analogue Input °C
temperature
LPHD1_MemGdPct_m Memory percentage of good Analogue Input %
Base V2,9
ag blocks
NT00391-09 55
Internal
PowerLogic T300 Database PS50
3.5 PS50
PS50
Module communication 0 = PS50 is nor communicating with HU250
Base V1.0 status LCCH1_ChLiv_stVal
status 1 = PS50 is communicating with HU250
0 = no Minor recoverable fault
Base V1.0 status LPHD1_PhyHealth_stVal_Warn Module health warning
1 = Minor recoverable fault
0 = no Major recoverable fault
Base V1.0 status LPHD1_PhyHealth_stVal_Fail Module health error
1 = Major recoverable fault
0 = On;
Base V1.0 status AcZAXN1_PwrSupAlm_stVal Immediate AC supply OFF
1 = Off
0 = On
Base V1.0 status AcZAXN1_DlPwrSupAlm_stVal Delayed AC supply OFF
1 = Off delay of 30 seconds
1 = On
Base V1.0 status AcZAXN1_PwrSupOn_stVal Supply input indication
0 = Off
1 = Overvoltage
Base V1.0 status AcZAXN1_PwrSupOv_stVal Supply input overvoltage
0 = No overvoltage
0 = No shut down
Base V1.0 status AcZAXN1_PwrShtDwn_stVal Power supply shutdown
1 = shut down after x s
1 = Configuration fault (CRC error)
Base V1.0 status LLN0_CfgHealth_stVal_Fail Configuration fault
0 = Configuration is valid
1 = Overtemperature on secondary or primary is ongoing
Base V1.0 status STMP1_Alm_stVal Overtemperature fault
0 = normal operation
Status
1 = A fault has occurred on IED output (short circuit, overload...)
Base V1.0 status DevZAXN1_PwrSupAlm_stVal IED output fault
1 = A fault has occurred on Telecom output (short circuit, overload...)
Base V1.0 status ComZAXN1_PwrSupAlm_stVal Telecom output fault
1 = A fault has occurred on Motor output (short circuit, overload...)
Base V1.0 status MotZAXN1_PwrSupAlm_stVal Motor output fault
1 = 12 V IED short circuit
Base V1.0 status DevZAXN1_PwrSupSc_stVal IED output short circuit
0 = 12 V IED no short circuit
1 = 12 V IED overload
Base V1.0 status DevZAXN1_PwrSupOl_stVal IED output overload
0 = 12 V IED no overload
1 = 12 V IED undervoltage
Base V1.0 status DevZAXN1_PwrSupUv_stVal IED output undervoltage
0 = no undervoltage
1 = 12 V IED overvoltage
Base V1.0 status DevZAXN1_PwrSupOv_stVal IED output overvoltage
0 = no overvoltage
Telecom output short 1 = 12 V Telecom short circuit
Base V1.0 status ComZAXN1_PwrSupSc_stVal
circuit 0 = 12 V Telecom no short circuit
1 = 12 V Telecom overload
Base V1.0 status ComZAXN1_PwrSupOl_stVal Telecom output overload
0 = 12 V Telecom no overload
Telecom output 1 = 12 V Telecom current cross max current threshold
Base V1.0 status ComZAXN1_PwrSupOc_stVal
overcurrent 0 = No fault
56 NT00391-09
PS50
CoreDb Option Software/ Point name/ Point description/ SCADA Object Type/ Bit or enumeration Value
type/ Logiciel Nom de la donnée Description de la donnée Type d'objet SCADA Liste de valeurs ou bits
Type
CoreDb
1 = 12 V Telecom undervoltage
Base V1.0 ComZAXN1_PwrSupUv_stVal Telecom output undervoltage Digital Input
0 = no undervoltage
1 = 12 V Telecom overvoltage
Base V1.0 ComZAXN1_PwrSupOv_stVal Telecom output overvoltage Digital Input
0 = no overvoltage
1 = 24/48 V short circuit
Base V1.0 MotZAXN1_PwrSupSc_stVal Motor output short circuit Digital Input
0 = 24/48 V no short circuit
1 = 24/48 V Overload
Base V1.0 MotZAXN1_PwrSupOl_stVal Motor output overload Digital Input
0 = 24/48 V Telecom no overload
1 = 24/48 V Motor current cross max current threshold
Base V1.0 MotZAXN1_PwrSupOc_stVal Motor output overcurrent Digital Input
0 = No fault
1 = Motor output undervoltage
Base V1.0 MotZAXN1_PwrSupUv_stVal Motor output undervoltage Digital Input
0 = OK
1 = Motor output overvolltage
Base V1.0 MotZAXN1_PwrSupOv_stVal Motor output overvoltage Digital Input
0 = no overvoltage
1 = Motor output lock out
Base V1.0 MotZAXN1_PwrSupLok_stVal Motor output lock out Digital Input
0 = OK
Status 0 = Operational
Base V1.0 ZBAT1_BatHealth_stVal Battery fault Digital Input
1 = Disconnect or Out of Order
0 = Connected
Base V1.0 ZBAT1_BatIso_stVal Battery disconnected Digital Input
1 = Disconnected
1 = Battery is under charge process
Base V1.0 ZBAT1_Cha_stVal Battery charging Digital Input
0 = Battery is not charging
1 = Battery is in floating mode
Base V1.0 ZBAT1_FltInd_general Battery charger floating Digital Input
0 = Battery is not in float mode
1 = Battery is discharging
Base V1.0 ZBAT1_Dsch_stVal Battery discharging Digital Input
0 = Battery is not discharging
0 = OK
Base V1.0 ZBAT1_BatLo_stVal Battery low Digital Input
1 = Battery low
1 = Battery deep discharge threshold has been reached
Base V1.0 ZBAT1_DDschInd_stVal Battery deep discharge Digital Input
0 = Battery is above deep discharge threshold
Base V1.0 ZBAT1_BatTest_stVal Battery test running Digital Input 0 = Battery test inactive, 1 = Battery test active
0 = Operational
Base V1.0 ZBAT1_ChaFlt_stVal Battery charger fault Digital Input
1 = Charger fault is detected
NT00391-09 57
Internal
PS50
Base V1.0 LLN0_PwrShtDwn_stVal General shutdown Digital Output
Base V1.0 ZBAT1_BatTestCtl_stVal Battery Test execute Digital Output
Base V1.0 LLN0_Restart_stVal Restart all Output Digital Output
Base V1.0 LLN0_Reboot_stVal Reboot PS50 Digital Output
Base V1.0 LLN0_RsTmpMnMx_stVal Reset temperature statistics Digital Output
Base V1.0 LLN0_CfgDef_stVal Reload default settings Digital Output
Command
Base V1.0 DevZAXN1_PwrSupOff_stVal IED output power OFF Digital Output
Base V1.0 DevZAXN1_PwrSupOn_stVal IED output power ON Digital Output
Base V1.0 ComZAXN1_PwrSupOff_stVal Telecom power output OFF Digital Output
Base V1.0 ComZAXN1_PwrSupOn_stVal Telecom power output ON Digital Output
Base V1.0 MotZAXN1_PwrSupOff_stVal Motor output power OFF Digital Output
Base V1.0 MotZAXN1_PwrSupOn_stVal Motor output power ON Digital Output
58 NT00391-09
PS50
CoreDb type/ Option Software/ Point name/ Point description/ SCADA Object Unit/Unité Range Min/ Range Max/ Scale/ Default/
Type d'objet SCADA
Base V1.0 AcZAXN1_Vol_mag Supply Input RMS voltage Analogue Input V 0 440 0,1
Base V1.0 DevZAXN1_Vol_mag IED output voltage Analogue Input V 0 16 0,1
Base V1.0 DevZAXN1_Amp_mag IED output current Analogue Input A 0 10 0,1
Base V1.0 ComZAXN1_Vol_mag Telecom output voltage Analogue Input V 0 16 0,1
Base V1.0 ComZAXN1_Amp_mag Telecom output current Analogue Input A 0 10 0,1
Base V1.0 MotZAXN1_Vol_mag Motor output voltage Analogue Input V 0 60 0,1
Base V1.0 MotZAXN1_Amp_mag Motor output current Analogue Input A 0 45 0,1
Base V1.0 ZBAT1_Vol_mag Battery voltage Analogue Input V 0 16 0,1
Base V1.0 ZBAT1_Amp_mag Battery current Analogue Input A -70 7 0,1
Analog Base V1.0 ZBAT1_ChaLevInd_mag Battery charge level indicator Analogue Input % 0 100 0,1
Base V1.0 STMP1_Tmp_mag Battery temperature Analogue Input °C -40 85
Base V1.0 STMP1_TmpMin_mag Battery temperature min Analogue Input °C -40 85
Base V1.0 STMP1_TmpMax_mag Battery temperature max Analogue Input °C -40 85
Base V1.0 ZBAT1_CapDsch_mag Last battery capacity discharge Analogue Input A/h 0 38 0,1
Battery actual internal
Base V1.0 ZBAT1_IntRMes_mag Analogue Input mOhm 0 300 0,1
resistance
Base V1.0 ZBAT1_ChaTms_mag Last battery charging time Analogue Input s 1 130000
Base V1.0 ZBAT1_DschTms_mag Last battery discharging time Analogue Input s 1 130000
Base V1.0 ZBAT1_BakUpTms_mag Back up time left Analogue Input s 1 130000
NT00391-09 59
Internal
PS50
Type d'objet SCADA
Supply input indication
Base V1.0 AcPTOV1_LnEna_setVal Boolean Setting 0 = Deactivated 1 = Activated 1
enable
Base V1.0 AcPTOV1_RsVal_setVal Integer Setting V 50 240 60
absence threshold
Base V1.0 AcPTOV1_StrVal_setMag Integer Setting V 50 240 70
presence threshold
Base V1.0 AcPTOV1_RsDlTmms_setVal Integer Setting ms 20 2000 40
absence timer
Base V1.0 AcPTOV1_OpDlTmms_setVal Integer Setting ms 20 2000 40
presence timer
Telecom output max current
Base V1.0 ComPTOC1_LnEna_setVal Boolean Setting 0 = Deactivated 1 = Activated 1
enable
Base V1.0 ComPTOC1_StrVal_setMag Integer Setting A 0,2 4 0,1 1
threshold
Base V1.0 ComPTOC1_OpDlTmms_setVal Integer Setting s 1 300 180
timer
Setpoint
Base V1.0 ZBAT1_TstEna_setVal Battery automatic test enable Boolean Setting 0 = Deactivated 1 = Activated 1
Base V1.0 ZBAT1_TstIntTmd_setVal Battery automatic test interval Integer Setting day 1 100 1
Battery automatic test retries
Base V1.0 ZBAT1_TstRtryCnt_setVal Integer Setting 1 9 2
count
Battery automatic test retries
Base V1.0 ZBAT1_TstRtryTmh_setVal Integer Setting h 1 24 12
interval
Battery test AC internal
Base V1.0 ZBAT1_IntRMax_setVal Integer Setting mOhm 30 300 40
maximum resistance
0 = Manual
Base V1.0 ZBAT1_Type_setVal Battery type Integer Setting 1 = 24 Ah 1
2 = 48 Ah
Base V1.0 ZBAT1_CapAH_setVal Battery nominal capacity Integer Setting Ah 14 48 0,1 24
Base V1.0 ZBAT1_BakUpEna_setVal Backup time enable Boolean Setting 0 = Deactivated 1 = Activated 1
Base V1.0 LLN0_BakUpMaxTmh_setVal Backup time duration Integer Setting h 1 16 16
60 NT00391-09
PowerLogic T300 Database Zigbee
3.6 Zigbee
Zigbee
Type
CoreDb
Base V1.0 ZgbLCCH1_ChCfg_stVal Zigbee interface 1 configured Digital Input
Base V1.0 ZgbLCCH2_ChCfg_stVal Zigbee interface 2 configured Digital Input
Base V1.0 LCCH1_ChLiv_stVal Zigbee network status Digital Input
CL110 V1.0 $ZONE$CL01_Online $ZONE$ Environmental sensor online Digital Input
CL110 V1.0 $ZONE$CL01_Paired $ZONE$ Environmental sensor paired Digital Input
CL110 V1.0 $ZONE$CL01_RSSI $ZONE$ Environmental sensor signal strength Digital Input
CL110CP V1.0 $ZONE$CL02_Online $ZONE$ Cold point sensor online Digital Input
CL110CP V1.0 $ZONE$CL02_Paired $ZONE$ Cold point sensor paired Digital Input
Status CL110CP V1.0 $ZONE$CL02_RSSI $ZONE$ Cold point sensor signal strength Digital Input
TH110 V1.0 $ZONE$$LOC$ASTMP_Online $ZONE$ $LOC$ Thermal sensor phase A online Digital Input
TH110 V1.0 $ZONE$$LOC$ASTMP_Paired $ZONE$ $LOC$ Thermal sensor phase A paired Digital Input
TH110 V1.0 $ZONE$$LOC$ASTMP_RSSI $ZONE$ $LOC$ Thermal sensor phase A signal strength Digital Input
TH110 V1.0 $ZONE$$LOC$BSTMP_Online $ZONE$ $LOC$ Thermal sensor phase B online Digital Input
TH110 V1.0 $ZONE$$LOC$BSTMP_Paired $ZONE$ $LOC$ Thermal sensor phase B paired Digital Input
TH110 V1.0 $ZONE$$LOC$BSTMP_RSSI $ZONE$ $LOC$ Thermal sensor phase B signal strength Digital Input
TH110 V1.0 $ZONE$$LOC$CSTMP_Online $ZONE$ $LOC$ Thermal sensor phase C online Digital Input
TH110 V1.0 $ZONE$$LOC$CSTMP_Paired $ZONE$ $LOC$ Thermal sensor phase C paired Digital Input
TH110 V1.0 $ZONE$$LOC$CSTMP_RSSI $ZONE$ $LOC$ Thermal sensor phase C signal strength Digital Input
NT00391-09 61
Internal
Zigbee
CoreDb type/ Option Software/ Point name/ Point description/ SCADA Object Unit/ Range Range Scale Default
Type CoreDb Logiciel Nom de la donnée Description de la donnée Type/ Unité Min/ Max/ / /
Type d'objet Valeur Valeur Echel Par
SCADA min Max le défaut
CL110 V1.0 $ZONE$CL01_BatVol_mag $ZONE$ Environmental sensor battery voltage Analogue Input V
CL110 V1.0 $ZONE$CL01_Tmp $ZONE$ Environmental sensor measured temperature Analogue Input °C
CL110 V1.0 $ZONE$CL01_Hum $ZONE$ Environmental sensor relative humidity Analogue Input %
CL110CP V1.0 $ZONE$CL02_BatVol_mag $ZONE$ Cold point sensor battery voltage Analogue Input V
CL110CP V1.0 $ZONE$CL02_TmpCP $ZONE$ Cold point sensor measured temperature Analogue Input °C
$ZONE$ $LOC$ Thermal sensor phase A internal
TH110 V1.0 $ZONE$$LOC$ASTMP_IntnTmp Analogue Input °C
temperature
Analog $ZONE$ $LOC$ Thermal sensor phase A measured
TH110 V1.0 $ZONE$$LOC$ASTMP_Tmp Analogue Input °C
temperature
$ZONE$ $LOC$ Thermal sensor phase B internal
TH110 V1.0 $ZONE$$LOC$BSTMP_IntnTmp Analogue Input °C
temperature
$ZONE$ $LOC$ Thermal sensor phase B measured
TH110 V1.0 $ZONE$$LOC$BSTMP_Tmp Analogue Input °C
temperature
$ZONE$ $LOC$ Thermal sensor phase C internal
TH110 V1.0 $ZONE$$LOC$CSTMP_IntnTmp Analogue Input °C
temperature
$ZONE$ $LOC$ Thermal sensor phase C measured
TH110 V1.0 $ZONE$$LOC$CSTMP_Tmp Analogue Input °C
temperature
62 NT00391-09
3.7 VIP
VIP
Type
CoreDb
0: Device is not communicating with HU250
Base V1.0 LCCH1_ChLiv_stVal Module communication status Digital Input
1: Device is communicating with HU250
Base V1.0 LLN0_ActSG_stVal Active setting group Digital Input
Base V1.0 LPHD1_PhyHealth_stVal_Warn Physical device health warning Digital Input
Base V1.0 LPHD1_PhyHealth_stVal_Fail Physical device health error Digital Input
Base V1.0 ExtPTRC1_Tr_general Tripping by external input Digital Input
Base V1.0 GenPTRC1_Tr_general Tripping in progress Digital Input
Base V1.0 TstPTRC1_Tr_general Tripping by test menu Digital Input
Base V1.0 GenPTRC1_TrInd_stVal Trip indication (latched) Digital Input
Base V1.0 PhPTOC1_Op_general Protection 50-51 delayed I> set point Digital Input
Base V1.0 PhPTOC2_Op_general Protection 50-51 delayed I>> set point Digital Input
Status Base V1.0 PhPTOC3_Op_general Protection 50-51 delayed I>>> set point Digital Input
Base V1.0 PhPTOC1_Str_general Protection 50-51 pick-up I> set point Digital Input
Base V1.0 PhPTOC2_Str_general Protection 50-51 pick-up I>> set point Digital Input
Base V1.0 PhPTOC3_Str_general Protection 50-51 pick-up I>>> set point Digital Input
Base V1.0 EfPTOC1_Op_general Protection 50N-51N delayed Io> set point Digital Input
Base V1.0 EfPTOC2_Op_general Protection 50N-51N delayed Io>> set point Digital Input
Base V1.0 EfPTOC1_Str_general Protection 50N-51N pick-up Io> set point Digital Input
Base V1.0 EfPTOC2_Str_general Protection 50N-51N pick-up Io>> set point Digital Input
Base V1.0 PhPTOC1_OpCnt_stVal Number of trips due to phase overcurrent Counter
Base V1.0 EfPTOC1_OpCnt_stVal Number of trips due to earth overcurrent Counter
Base V1.0 PTTR1_OpCnt_stVal Number of trips due to thermal overload Counter
Base V1.0 ExtPTRC1_OpCnt_stVal Number of trips due to external tripping Counter
NT00391-09 63
Internal
VIP
Base V1.0 LLN0_ActSG1_stVal Select settings group 1 Digital Output 0 = ignored, 1 = select settings group 1
Base V1.0 LLN0_ActSG2_stVal Select settings group 2 Digital Output 0 = ignored, 1 = select settings group 2
Command
Base V1.0 LLN0_DmdARs_stVal Reset peak demand current values Digital Output
Base V1.0 GenPTRC1_TrIndRs_stVal Reset latched trip indication Digital Output
VIP
CoreDb type/ Option Software/ Point name/ Point description/ SCADA Object Unit/ Range Range Scale Default
Type CoreDb Logiciel Nom de la donnée Description de la donnée Type/ Unité Min/ Max/ / /
Type d'objet Valeur Valeur Echel Par
SCADA min Max le défaut
Base V1.0 PMr_MMXU1_A_phsA RMS current phase A Analogue Input A 0,1
Base V1.0 PMr_MMXU1_A_phsB RMS current phase B Analogue Input A 0,1
Base V1.0 PMr_MMXU1_A_phsC RMS current phase C Analogue Input A 0,1
Analog Base V1.0 PMr_MMXU1_A_res RMS current residual Analogue Input A 0,1
Base V1.0 PMx_MMXU1_A_phsA Peak demand current phase A Analogue Input A 0,1
Base V1.0 PMx_MMXU1_A_phsB Peak demand current phase B Analogue Input A 0,1
Base V1.0 PMx_MMXU1_A_phsC Peak demand current phase C Analogue Input A 0,1
64 NT00391-09
PowerLogic T300 Personal notes
NT00391-09 65
Internal
PowerLogic T300 Personal notes
66 NT00391-09
Internal
Publication, Production and Printing:
Schneider Electric Telecontrol - Made in France
Schneider Electric
35 rue Joseph Monier
92500 Rueil Malmaison - France
Phone: +33 (0)1 41 29 70 00
www.se.com
En raison de l’évolution des normes et du matériel, les caractéristiques

indiquées par les textes et les images de ce document ne nous engagent
qu’après confirmation par nos services.
As standards, specifications, and designs change from time

to time, please ask for confirmation of the information given
in this publication.
© 2021-2023 Schneider Electric. All Rights Reserved.

This document has been
NT00391-09 - 09/2023 printed on recycled paper
Internal

NT00391 - 09 - T300 Database

Transféré par

Droits d'auteur :

Formats disponibles

NT00391 - 09 - T300 Database

Transféré par

Informations du document

Titre original

Copyright

Formats disponibles

Partager ce document

Partager ou intégrer le document

Options de partage

Avez-vous trouvé ce document utile ?

Ce contenu est-il inapproprié ?

Droits d'auteur :

Formats disponibles

NT00391 - 09 - T300 Database

Transféré par

Droits d'auteur :

Formats disponibles

MV electrical network management

Gestion des réseaux électriques MT

Each point is defined by:

Chaque point (ou variable) est défini par :

A noter que la correspondance entre le type de donnée et les objets SCADA

Remarques 2 : certaines variables ont été mises à l'échelle afin d'harmoniser le

Les variables associées au condition monitoring (CM) et au modem Zigbee

Key Label in point name Description Meaning

SUB Substation Condition monitoring zone : Substation

3 List of data points in CoreDb / Liste de données dans CoreDb

Point name/ Point description/

Point name/ Point description/

Analog PM V1.1 PMa_MMXU1_A_phsC Average current phase C Analogue Input A

The following data points are supported only by SC160.

En raison de l’évolution des normes et du matériel, les caractéristiques

As standards, specifications, and designs change from time

© 2021-2023 Schneider Electric. All Rights Reserved.

Vous aimerez peut-être aussi