Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Elite Ef15p

Télécharger au format pdf ou txt
Télécharger au format pdf ou txt
Vous êtes sur la page 1sur 61

SERVICE MANUAL

EF15P

WORLD HEADQUARTERS

CANADA U.S.A.
Yorkville Sound Limited Yorkville Sound Inc. SMT Disclaimer
550 Granite Court 4625 Witmer Industrial Estate Due to the complex nature of the use of SMT installed components
Pickering, Ontario Niagara Falls, New York in Yorkville equipment, we highly caution all service technicians in
L1W 3Y8 CANADA 14305, USA attempting to repair or replace SMT factory installed components.
Many of these components may be glued prior to initial soldering.
Voice: 905-837-8481 Voice: 716-297-2920 Replacing SMT components requires expensive
Fax: 905-837-8746 Fax: 716-297-3689 specialized de-soldering equipment and training.
Yorkville Sound will repair and replace defective SMT components
to ensure proper quality assurance and installation is maintained.

0DQXDO6HUYLFH()3YÜ2FW
IM PORTAN T S A FE TY IN S TRU C TION S
This lightning flash with arrowhead symbol, within The exclamation point within an equilatereal triangle is intended to alert the
an equilateral triangle, is intended to alert the user to the presence of user to the presence of important operating and maintenance (servicing)
uninsulated “dangerous voltage” within the product’s enclosure that may be instructions in the literature accompanying the appliance.
of sufficient magnitude to constitute a risk of electric shock to persons.
Le point d’exclamation à l’intérieur d’un triangle équilatéral est prévu pour alerter
Ce symbole d’éclair avec tête de flèche dans un triangle équilatéral est prévu pour alerter DO NOT l’utilisateur de la présence d’instructions importantes dans la littérature accompagnant
l’utilisateur de la présence d’un «voltage dangereux» non-isolé à proximité de l’enceinte du PUSH OR PULL l’appareil en ce qui concerne l’opération et la maintenance de cet appareil.
produit qui pourrait être d’ampleur suffisante pour présenter un risque de choque électrique. SEPARATE
COLLECTION
The DO NOT STACK symbol is intended to alert the user that the product WEEE
shall not be vertically stacked because of the nature of the product.
IEC 60417-5041
La symbole NE PAS EMPILER est pour alerter l'utilisateur que le produit
ne doit pas être empilé verticalement en raison de la nature du produit. CAUTION: HOT SURFACE NOT TO BE SERVICED
ATTENTION: SURFACE CHAUDE BY USERS

FOLLOW ALL INSTRUCTIONS SUIVEZ TOUTES LES INSTRUCTIONS


Instructions pertaining to a risk of fire, electric shock, or injury to a person Instructions relatives au risque de feu, choc électrique, ou blessures aux personnes
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). AVIS: AFIN DE REDUIRE LES RISQUE DE CHOC ELECTRIQUE, N’ENLEVEZ PAS LE COUVERT (OU
NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE LE PANNEAU ARRIERE) NE CONTIENT AUCUNE PIECE REPARABLE PAR L’UTILISATEUR.
PERSONNEL. THIS DEVICE IS FOR INDOOR USE ONLY! CONSULTEZ UN TECHNICIEN QUALIFIE POUR L’ENTRETIENT CE PRODUIT EST POUR L’USAGE À
INSTALLED BATTERY PACKS SHALL NOT BE EXPOSED TO EXCESSIVE HEAT L’INTÉREUR SEULEMENT. LES PACKS BATTERIES INSTALLÉS NE DOIVENT PAS ÊTRE EXPOSÉS
SUCH AS SUNSHINE, FIRE OR THE LIKE. À UNE CHALEUR EXCESSIVE TELLE QUE LE ENSOLEILLEMENT, LE FEU OU SIMILAIRES.

Read Instructions: The Owner’s Manual should be read and understood before operation of your unit. Please, save these Veuillez Lire le Manuel: Il contient des informations qui devraient êtres comprises avant l’opération de votre appareil.
instructions for future reference and heed all warnings. Conservez. Gardez S.V.P. ces instructions pour consultations ultérieures et observez tous les avertissements.
Clean only with dry cloth. Nettoyez seulement avec le tissu sec.
Packaging: Keep the box and packaging materials, in case the unit needs to be returned for service. Emballage: Conservez la boite au cas ou l’appareil devait être retourner pour réparation.
Warning: To reduce the risk or fire or electric shock, do not expose this apparatus to rain or moisture. Do not Avertissement: Pour réduire le risque de feu ou la décharge électrique, n'exposez pas cet appareil à la pluie ou à l'humidité.
use this apparatus near water! N’utilisez pas cet appareil près de l’eau!
Warning: When using electric products, basic precautions should always be followed, including the following: Attention: Lors de l’utilisation de produits électrique, assurez-vous d’adhérer à des précautions de bases incluant celle qui suivent:
Power Sources Alimentation - L’appareil ne doit être branché qu’à une source d’alimentation correspondant au voltage spécifié dans
Your unit should be connected to a power source only of the voltage specified in the owners manual or as marked on the le manuel ou tel qu’indiqué sur l’appareil. Cet appareil est équipé d’une prise d’alimentation polarisée. Ne pas utiliser cet
unit. This unit has a polarized plug. Do not use with an extension cord or receptacle unless the plug can be fully inserted. appareil avec un cordon de raccordement à moins qu’il soit possible d’insérer complètement les trois lames. Des précautions
Precautions should be taken so that the grounding scheme on the unit is not defeated. An apparatus with CLASS I doivent êtres prises afin d’eviter que le système de mise à la terre de l’appareil ne soit désengagé. Un appareil construit
construction shall be connected to a Mains socket outlet with a protective earthing connection. Where the MAINS plug or selon les normes de CLASS I devrait être raccordé à une prise murale d’alimentation avec connexion intacte de mise à la
an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. masse. Lorsqu’une prise de branchement ou un coupleur d'appareils est utilisée comme dispositif de débranchement, ce
Hazards dispositif de débranchement devra demeurer pleinement fonctionnel avec raccordement à la masse.
Do not place this product on an unstable cart, stand, tripod, bracket or table. The product may fall, causing serious personal Risque - Ne pas placer cet appareil sur un chariot, un support, un trépied ou une table instables. L’appareil pourrait tomber et
injury and serious damage to the product. Use only with cart, stand, tripod, bracket, or table recommended by the blesser quelqu’un ou subir des dommages importants. Utiliser seulement un chariot, un support, un trépied ou une table
manufacturer or sold with the product. Follow the manufacturer’s instructions when installing the product and use mounting recommandés par le fabricant ou vendus avec le produit. Suivre les instructions du fabricant pour installer l’appareil et utiliser les
accessories recommended by the manufacturer. Only use attachments/accessories specified by the manufacturer accessoires recommandés par le fabricant. Utilisez seulement les attachements/accessoires indiqués par le fabricant.
Note: Prolonged use of headphones at a high volume may cause health damage on your ears. Note: L'utilisation prolongée des écouteurs à un volume élevé peut avoir des conséquences néfastes sur la santé
The apparatus should not be exposed to dripping or splashing water; no objects filled with liquids should be sur vos oreilles.
placed on the apparatus. Il convient de ne pas placer sur l’appareil de sources de flammes nues, telles que des bougies allumées.
Terminals marked with the “lightning bolt” are hazardous live; the external wiring connected to these terminals require L’appeil ne doit pas être exposé à des égouttements d’eau ou des éclaboussures et qu’aucun objet rempli de liquide tel
installation by an instructed person or the use of ready made leads or cords. que des vases ne doit être placé sur l’appareil.
Ensure that proper ventilation is provided around the appliance. Do not install near any heat sources such as radiators, Assurez que lappareil est fourni de la propre ventilation. Ne procédez pas à l’installation près de source de chaleur tels
heat registers, stoves, or other apparatus (including amplifiers) that produce heat. que radiateurs, registre de chaleur, fours ou autres appareils (incluant les amplificateurs) qui produisent de la chaleur.
No naked flame sources, such as lighted candles, should be placed on the apparatus. Les dispositifs marqués d’une symbole “d’éclair” sont des parties dangereuses au toucher et que les câblages
Power Cord extérieurs connectés à ces dispositifs de connection extérieure doivent être effectivés par un opérateur formé ou en
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than utilisant des cordons déjà préparés.
the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided Cordon d’Alimentation - Ne pas enlever le dispositif de sécurité sur la prise polarisée ou la prise avec tige de
for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. mise à la masse du cordon d’alimentation. Une prise polarisée dispose de deux lames dont une plus large que l’autre. Une
The AC supply cord should be routed so that it is unlikely that it will be damaged. Protect the power cord from being walked on prise avec tige de mise à la masse dispose de deux lames en plus d’une troisième tige qui connecte à la masse. La lame plus
or pinched particularly at plugs. If the AC supply cord is damaged DO NOT OPERATE THE UNIT. To completely disconnect large ou la tige de mise à la masse est prévu pour votre sécurité. La prise murale est désuète si elle n’est pas conçue pour
this apparatus from the AC Mains, disconnect the power supply cord plug from the AC receptacle. The mains plug of the accepter ce type de prise avec dispositif de sécurité. Dans ce cas, contactez un électricien pour faire remplacer la prise murale.
power supply cord shall remain readily operable. Évitez d’endommager le cordon d’alimentation. Protégez le cordon d’alimentation. Assurez-vous qu’on ne marche pas dessus
Unplug this apparatus during lightning storms or when unused for long periods of time. et qu’on ne le pince pas en particulier aux prises. N’UTILISEZ PAS L’APPAREIL si le cordon d’alimentation est endommagé.
Pour débrancher complètement cet appareil de l’alimentation CA principale, déconnectez le cordon d’alimentation de la prise
Service d’alimentation murale. Le cordon d’alimentation du bloc d’alimentation de l’appareil doit demeurer pleinement fonctionnel.
The unit should be serviced only by qualified service personnel. Servicing is required when the apparatus has
been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects Débranchez cet appareil durant les orages ou si inutilisé pendant de longues périodes.
have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, Service - Consultez un technicien qualifié pour l’entretien de votre appareil. L'entretien est nécessaire quand l'appareil a été
or has been dropped. Disconnect power before servicing! endommagé de quelque façon que se soit. Par exemple si le cordon d’alimentation ou la prise du cordon sont endommagés, si il y
a eu du liquide qui a été renversé à l’intérieur ou des objets sont tombés dans l'appareil, si l'appareil a été exposé à la pluie ou à
l'humidité, si il ne fonctionne pas normalement, ou a été échappé. Débrancher l’appareil avant d’enlever les couvercles!

IM PORTAN T S A FE TY IN S TRU C TION S


The Lightning Flash with arrowhead symbol within an equilateral triangle, is intended to alert the user to the presence of uninsulated Le symbole représentant un éclair avec une flèche à l’intérieur d’un triangle équilatéral est utilisé pour prévenir l’utilisateur de la
"dangerous voltage" within the product enclosure that may be of sufficient magnitude to constitute a risk of shock to persons présence d’une tension électrique dangereuse non isolée à l’intérieur de l’appareil. Cette tension est d’un niveau suffisamment
élevé pour représenter un risque d’électrocution

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance Le symbole représentant un point d’exclamation à l’intérieur d’un triangle équilatéral, signale à l’utilisateur la présence d’instructions
(servicing) instructions in the literature accompanying the product importantes relatives au fonctionnement et à l’entretien de l’appareil dans cette notice d’installation

1. Read these instructions. 1. Lisez ces instructions.


2. Keep these instructions. 2. Conservez ces instructions.
3. Heed all warnings. 3. Respecter tous les avertissements.
4. Follow all instructions. 4. Suivez toutes les instructions.
5. Do not use this apparatus near water. 5. N'utilisez pas l'appareil près de l'eau.
6. Clean only with dry cloth. 6. Nettoyer uniquement avec chiffon sec.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 7. Ne bloquez pas les ouvertures de ventilation. Installer en suivant les instructions du fabricant.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 8. Ne pas installer près des sources de chaleur telles que radiateurs, bouches de chaleur, four ou autres appareils (y compris les amplificateurs)
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A produisant de la chaleur.
grounding type plug has two blades and a third grounding prong. The wide blade or the third prongs are provided for your safety. If the provided 9. N'annulez pas l'objectif sécuritaire de la fiche polarisée ou de la tige de mise à la terre. Une fiche polarisée possède deux lames avec une plus
plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. large que l'autre. Une prise avec mise à la terre possède deux lames et une troisième tige. La lame large ou la troisième tige sont fournis pour
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit votre sécurité. Si la fiche n'entre pas dans votre prise, consultez un électricien pour remplacer la prise obsolète.
from the apparatus. 10. Protéger le cordon d'alimentation des piétinements ou pincements en particulier près des fiches, des prises de courant et au point de
11. Only use attachments/accessories specified by the manufacturer. sortie de l'appareil.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution 11. Utilisez uniquement les accessoires spécifiés par le fabricant.
when moving the cart/apparatus combination to avoid injury from tip-over. 12. Utiliser uniquement avec un charriot, stand, trépied ou une table spécifiée par le fabricant, ou vendus avec l'appareil.
13. Unplug this apparatus during lightning storms or when unused for long periods of time. 13. Débranchez l'appareil durant un orage ou lorsqu'il reste inutilisé pendant de longues périodes de temps.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as 14. Confiez toute réparation à un technicien qualifié. Une réparation est nécessaire lorsque l'appareil a été endommagé de quelque façon que ce
power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or soit; comme lorsque le cordon d'alimentation ou la fiche est endommagé, lorsque du liquide a été renversé ou des objets sont tombés à l'intérieur,
moisture, does not operate normally, or has been dropped. lorsque l'appareil a été exposé à la pluie ou l'humidité, ne fonctionne pas normalement, ou est tombé.

WARNING: AVERTISSEMENT:
• To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture and objects filled with liquids, such as vases, should not be • Pour réduire les risques d'incendie ou de choc électrique, ne pas exposer cet appareil à la pluie ou à l'humidité et ne placez pas d’objets contenant
placed on this apparatus. des liquides, tels que des vases, sur l’appareil.
• To completely disconnect this apparatus from the ac mains, disconnect the power supply cord plug from the ac receptacle. • Pour isoler totalement cet appareil de l'alimentation secteur, débranchez totalement son cordon d'alimentation du réceptacle CA.
• The mains plug of the power supply cord or appliance coupler shall remain readily accessible. • La prise du cordon d’alimentation ou du prolongateur, si vous en utilisez un comme dispositif de débranchement, doit rester facilement accessible

CAUTION AVIS
TO PREVENT ELECTRIC SHOCK HAZARD, POUR PRÉVENIR LES RISQUES D'ÉLECTROCUTION,
DO NOT CONNECT TO MAINS POWER SUPPLY NE PAS RACCORDER A L’ALIMENTATION ÉLECTRIQUE ALORS
WHILE GRILLE IS REMOVED. QUE LA GRILLE EST RETIRÉE.

DOC-Safety-5v0+UL60065-00-1v8 • February 24, 2020


Yorkville

EF15P
1200 WATT ACTIVE LOUDSPEAKER ENCLOSURE

www.yorkville.com

LINE IN LEVEL
LINE

LINE
MIC IN LEVEL
in
MIXER
M Ma

x
ENABLE

A-Z1477 / 1v2
MAIN IN
MIC

in
Ma MIC LINK
M

x
DSP
MIXER
ENABLE
MAIN IN

MAIN
CLIP BLUETOOTH
MASTER

LEVEL
LIMIT CONTROL

EF15P
MODE
in
Ma
M

x
THRU

Enable / Disable
Hold 4 sec. to reset
CLUB SUB Bluetooth
TM

CONCERT 100Hz SMART LED Flashing:


VOCAL Ready to Connect
LIN K USER
LED On:
Connected

EF15P A-Z1445 / 1v9

230V 50Hz 120VAC


900mA 60Hz 1.7A
DOUBLE INSULATED, U-GND REQUIRED
FUSE: T1,6AH FUSE: T3.15AH sloblo FOR PERFORMANCE, NOT SAFETY.

DESIGNED & MANUFACTURED BY Contains Transmitter Module FCC ID: WAP2011


YORKVILLE SOUND • TORONTO, CANADA This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.

POWER

ON

OFF

CAUTION: REPLACE FUSE WITH


SAME TYPE AND RATING

ATTENTION: REMPLACER LE FUSIBLE


DU MEME TYPE ET DU MEME COURANT NOMINAL
Yorkville

EF15P
1200 WATT ACTIVE LOUDSPEAKER ENCLOSURE

www.yorkville.com

A-Z1773 / 1v2

LINE MIC MASTER


0 Bluetooth
TM

SMART

Enable / Disable
Hold 4 sec. to reset
SUB LED Flashing:
Ready to Connect
in in in 100Hz LED On:
Ma Ma Ma
M

M
x

Connected
MODE
CLIP LIMIT CLUB NOTE: THE YORKVILLE APP IS
MIXER CONCERT
ENABLE VOCAL
NEEDED TO CONTROL FUNCTIONS
USER THROUGH BLUETOOTHTM AND IS
NOT FOR STREAMING AUDIO!
LIN K

LINE MIC MAIN IN THRU

LINE IN LEVEL

MIC IN LEVEL
MIXER
ENABLE POWER
Phantom +24V

MAIN IN ON

LINK EF15P
DSP
OFF
MAIN
BLUETOOTH
LEVEL
CONTROL

EF15P REV2 A-Z1463 / 1v0

230V 50Hz 120VAC


900mA 60Hz 1.7A
FUSE: T1,6AH FUSE: T3.15AH sloblo

DESIGNED & MANUFACTURED BY CAUTION: REPLACE FUSE WITH


YORKVILLE SOUND • TORONTO, CANADA SAME TYPE AND RATING

Contains Transmitter Module FCC ID: WAP2011


ATTENTION: REMPLACER LE FUSIBLE
This device complies with Part 15 of the FCC
DU MEME TYPE ET DU MEME COURANT NOMINAL
Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.

DOUBLE INSULATED, U-GND REQUIRED


FOR PERFORMANCE, NOT SAFETY.
Specifications
EF10P EF12P EF15P EF215P
System Type 2-Way 2-Way 2-Way 2-Way
Active or Passive Active Active Active Active
Program Power (watts) 500 watts (1000 watts Peak) 1200 watts (2400 watts Peak) 1200 watts (2400 watts Peak) 1200 watts (2400 watts Peak)
Max SPL (dB) 128dB Peak (122dB Continuous) 131dB Peak (125dB Continuous) 133dB Peak (127dB Continuous) 133dB Peak (127dB Continuous)
Frequency Response (Hz +/- 3dB) 56 - 20k (Hz +/- 3dB) 47 - 16k (Hz +/- 3dB) 43 - 16k 40 – 16k (Hz +/- 3dB)
Crossover Frequency (Hz) 1800 1100 1100 1100
Driver Configuration 10-inch, 1.3-inch Diaphragm 12-inch, 3-inch Diaphragm 15-inch, 3-inch Diaphragm 2 X 15-inch, 3-inch Diaphragm
HF Driver(s) 1.3-inch Voice coil (Titanium Diaphragm) 3-inch Voice coil (Titanium Diaphragm) 3-inch Voicecoil (Titanium Diaphragm) 3-inch Voicecoil (Titanium Diaphragm)
HF Dispersion (°H x °V) 100x40 60x40 60x40 60x40
LF Driver(s) 10-inch Neo magnet w/2.5-inch Voice coil 12-inch Neo magnet w/3-inch Voice coil 15-inch neo magnet w/3-inch Voice coil 2 X 15-inch neo magnet w/3-inch Voice coil
HF Power Amplifier (watts) 100 300 300 300
HF Amplifier Type 2-Tier Class H 3-Tier High Headroom 3-Tier High Headroom 3-Tier High Headroom
LF Power Amplifier (watts) 400 900 900 900
LF Amplifier Type Class-D Class-D Class-D Class-D
Power Cable 25 ft (7.6m) Heavy Gauge Detachable IEC 25 ft (7.6m) Heavy Gauge Detachable IEC 25 ft (7.6m) Heavy Gauge Detachable IEC 25 ft (7.6m) Heavy Gauge Detachable IEC
In / Out Connections 1 x XLR & 1/4-inch Combi-jack Line Input 1 x XLR & 1/4-inch Combi-jack Line Input 1 x XLR & 1/4-inch Combi-jack Line Input 1 x XLR & 1/4-inch Combi-jack Line Input
1 x XLR microphone Input 1 x XLR microphone Input 1 x XLR microphone Input 1 x XLR microphone Input
1 x XLR & 1/4-inch Combi-jack Main Input 1 x XLR & 1/4-inch Combi-jack Main Input 1 x XLR & 1/4-inch Combi-jack Main Input 1 x XLR & 1/4-inch Combi-jack Main Input
1 x XLR-M Thruput 1 x XLR-M Thruput 1 x XLR-M Thruput 1 x XLR-M Thruput
Input Impedance (Bal/UnBal) 95Kohms / 90kohms 95Kohms / 90kohms 95Kohms / 90kohms 95Kohms / 90kohms
Input Sensitivity (Vrms Sine) +4dBv / 1.23V +4dBv / 1.23V +4dBv / 1.23V +4dBv / 1.23V
Controls Mixer Enable Mixer Enable Mixer Enable Mixer Enable
Mic Input w/level Mic Input w/level Mic Input w/level Mic Input w/level
Line Input w/level Line Input w/level Line Input w/level Line Input w/level
DSP Mode (Club, Concert, Vocal, Custom) DSP Mode (Club, Concert, Vocal, Custom) DSP Mode (Club, Concert, Vocal, Custom) DSP Mode (Club, Concert, Vocal, Custom)
Sub (100Hz HP Filter) Sub (100Hz HP Filter) Sub (100Hz HP Filter) Sub (100Hz HP Filter)
Bluetooth Control Enable Bluetooth Control Enable Bluetooth Control Enable Bluetooth Control Enable
Master Level Master Level Master Level Master Level
Bar Handles 1 x Side / 1 x Top 2 x Side / 1 x Top 2 x Side / 1 x Top 4 x Side / 1 x Top
Flypoints 7 x ¼-20 (2 Top, 2 Bottom, 2 Each Side, 1 Pullback) 8 x ¼-20 (2 Top, 2 Bottom, 2 Each Side, 2 Pullback) 8 x ¼-20 (2 Top, 2 Bottom, 2 Each Side, 2 Pullback) 8 x ¼-20 (2 Top, 2 Bottom, 2 Each Side, 2 Pullback)
Pole Mount Adapter (1 3/8"-3.5cm) 1 Bottom (1 3/8-inch / 3.5cm) 1 Bottom (1 3/8-inch / 3.5cm) 1 Bottom (1 3/8-inch / 3.5cm) N/A
Enclosure Materials ABS Coated Baltic Birch Plywood ABS Coated Baltic Birch Plywood ABS Coated Baltic Birch Plywood ABS Coated Baltic Birch Plywood
Dimensions (DWH xbackW, inches) 13 x 13.7 x 20 x 9.5 14.25 x 16.25 x 25.5 x 9.75 14 x 18.5 x 30 x 12 14 X 18.5 X 44.5 X 12
Dimensions (DWH xbackW, cm) 33 x 34.8 x 50.8 x 24 36.2 x 41.3 x 64.8 x 24.8 35.6 x 47 x 76 x 30.5 35.6 X 47 X 113 X 30.5
Weight (lbs/kg) 42 / 19.1 59 / 26.8 64 / 29 93 / 42
Specifications subject to change without notice
Spécifications
EF10P EF12P EF15P EF215P
Type de système 2 voies 2 voies 2 voies 2 voies
Active or Passive Active Active Active Active
Puissance(watts) 500 watts (1000 watts Pointe) 1200 watts (2400 watts Pointe) 1200 watts (2400 watts Pointe) 1200 watts (2400 watts Pointe)
Max SPL (dB) 128dB Pointe (122dB Continue) 131dB Pointe (125dB Continue) 133dB Pointe (127dB Continue) 133dB Pointe (127dB Continue)
Réponse en Fréquence (Hz +/- 3dB) 56 - 20k (Hz +/- 3dB) 47 - 16k (Hz +/- 3dB) 43 - 16k 40 – 16k (Hz +/- 3dB)
Fréquence de Coupure (Hz) 1800 1100 1100 1100
Configuration de haut-parleur 10-pouces, Membrane 1.3-pouce 12-pouces, Membrane 3-pouces 15-pouces, Membrane 3-pouces 2 X 15-inch, 3-inch Diaphragm
Driver HF Bobine de 1.3-pouce (Membrane de Titane) Bobine de 3-pouce (Membrane de Titane) Bobine de 3-pouce (Membrane de Titane) Bobine de 3-pouce (Membrane de Titane)
Dispersion HF (°H x °V) 100x40 60x40 60x40 60x40
Haut-parleur Fréquences Graves Aimant Néo 10-pouces avec Bobine 2.5-pouces Aimant Néo 12-pouces avec Bobine 3-pouces Aimant Néo 15-pouces avec Bobine 3-pouces 2 X 15-inch neo magnet w/3-inch Voice coil
Amplificateur de Puissance HF (watts) 100 300 300 300
Amplificateur de Puissance HF (type) 2-étages Classe H 3-étage, extension dynamique élevée 3-étage, extension dynamique élevée 3-étage, extension dynamique élevée
Amplificateur de Puissance Basses Fréquences (watts) 400 900 900 900
Amplificateur de Puissance Basses Fréquences (type) Classe-D Classe-D Classe-D Classe-D
Cordon d'Alimentation 25 pieds (7.6m) Jauge élevé amovible CEI 25 pieds (7.6m) Jauge élevé amovible CEI 25 pieds (7.6m) Jauge élevé amovible CEI 25 pieds (7.6m) Jauge élevé amovible CEI
Connexions d'entrée / sorites Entrée Ligne Combi-jack 1 x XLR & 1/4-pouce Entrée Ligne Combi-jack 1 x XLR & 1/4-pouce Entrée Ligne Combi-jack 1 x XLR & 1/4-pouce Entrée Ligne Combi-jack 1 x XLR & 1/4-pouce
Entrée pour microphone 1 x XLR Entrée pour microphone 1 x XLR Entrée pour microphone 1 x XLR Entrée pour microphone 1 x XLR
Entrée Principale Combi-jack 1 x XLR & 1/4-pouce Entrée Principale Combi-jack 1 x XLR & 1/4-pouce Entrée Principale Combi-jack 1 x XLR & 1/4-pouce Entrée Principale Combi-jack 1 x XLR & 1/4-pouce
1 x XLR-M "Thruput" 1 x XLR-M "Thruput" 1 x XLR-M "Thruput" 1 x XLR-M "Thruput"
Impédance d'entrée (Syml/Asym) 95Kohms / 90kohms 95Kohms / 90kohms 95Kohms / 90kohms 95Kohms / 90kohms
Sensibilité d'entrée (Vrms Sine) +4dBv / 1.23V +4dBv / 1.23V +4dBv / 1.23V +4dBv / 1.23V
Commandes Activation du mixeur Activation du mixeur Activation du mixeur Activation du mixeur
Niveau de l'entrée Mic Niveau de l'entrée Mic Niveau de l'entrée Mic Niveau de l'entrée Mic
Niveau de l'entrée Ligne Niveau de l'entrée Ligne Niveau de l'entrée Ligne Niveau de l'entrée Ligne
Mode DSP (Club, Concert, Vocal, Custom) Mode DSP (Club, Concert, Vocal, Custom) Mode DSP (Club, Concert, Vocal, Custom) Mode DSP (Club, Concert, Vocal, Custom)
Sub (Filtre HP 100Hz ) Sub (Filtre HP 100Hz ) Sub (Filtre HP 100Hz ) Sub (Filtre HP 100Hz )
Activation de la fonction Bluetooth Activation de la fonction Bluetooth Activation de la fonction Bluetooth Activation de la fonction Bluetooth
Niveau Principal (Master) Niveau Principal (Master) Niveau Principal (Master) Niveau Principal (Master)
Poignées 1 x Côté / 1 x Dessus 2 x Côté / 1 x Dessus 2 x Côté / 1 x Dessus 4 x Side / 1 x Top
Points de suspension 7 x ¼-20 (2 Dessus, 2 Dessous, 2 Chaque côté, 1 Pullback) 8 x ¼-20 (2 Dessus, 2 Dessous, 2 Chaque côté, 2 Pullback) 8 x ¼-20 (2 Dessus, 2 Dessous, 2 Chaque côté, 2 Pullback) 8 x ¼-20 (2 Dessus, 2 Dessous, 2 Chaque côté, 2 Pullback)
Adaptateur de montage sur poteau (1 3/8"-3.5cm) 1 Dessous (1 3/8-pouce / 3.5cm) 1 Dessous (1 3/8-pouce / 3.5cm) 1 Dessous (1 3/8-pouce / 3.5cm) N/A
Matériaux de construction Contreplaqué de bouleau baltique enduit d'ABS Contreplaqué de bouleau baltique enduit d'ABS Contreplaqué de bouleau baltique enduit d'ABS Contreplaqué de bouleau baltique enduit d'ABS
Dimensions (PLH xL arrière, pouces) 13 x 13.7 x 20 x 9.5 14.25 x 16.25 x 25.5 x 9.75 14 x 18.5 x 30 x 12 14 X 18.5 X 44.5 X 12
Dimensions (PLH xL arrière, cm) 33 x 34.8 x 50.8 x 24 36.2 x 41.3 x 64.8 x 24.8 35.6 x 47 x 76 x 30.5 35.6 X 47 X 113 X 30.5
Poids (livres/kg) 42 / 19.1 59 / 26.8 64 / 29 93 / 42
Spécifications sujettes à changement sans préavis
Block Diagram for EF12P & EF15P (REV1)
D E S I G N E D & M A N U FA C T U R E D B Y Y O R K V I L L E S O U N D

Combi-Jack

1 2
Line 3

Level
HF
RCA Σ
AMP

1 2
Mic 3 Mixer
Enable
XLR Level

LF
Combi-Jack
AMP
DSP

1 2
DAC
Main In 3 ADC
/ Link

1 2
3

XLR
Thru Microcontroller

Bluetooth

Master Mode Sub BluetoothTM


Level

Block-Diag-EF12P-EF15P-00-1v1
Block Diagram for EF10P, EF12P, EF15P (REV2) & EF215P
D E S I G N E D & M A N U FA C T U R E D B Y Y O R K V I L L E S O U N D

Combi-Jack

1 2
Line 3

Level
HF
Σ
1/8-inch TRS AMP

1 2
Mic 3 Mixer
Enable
XLR Level
+24V Phantom
LF
Combi-Jack
AMP
DSP

1 2
DAC
Main In 3 ADC
/ Link

1 2
3

XLR EF215P
Thru Microcontroller

Bluetooth

Master Mode Sub BluetoothTM


Level

Block-Diag-EF_P-Series-REV2-00-2v1
M1497 02 Parts Reference List 9/28/2020
REF YS # Description REF YS # Description REF YS # Description REF YS # Description REF YS # Description REF YS # Description
AI-ASS M1497-59 EF15P/12P/POWER SUPPLY INPUT C80 8139 _22U 25V 20%CAP 1210 SMT X7R D8 7750 CDSF4148 75V 0A15 1005 SMT R5 7624 W100 100R 1% 0805 SMT RES R95 7625 W100 10K0 1% 0805 SMT RES R196 7900 W125 30K 0.5% 0805 SMT RES
C1 7878 __1U 25V 20%CAP 1206 SMT X7R C81 7813 _47P 50V 5%CAP 0805 SMT NPO D9 7750 CDSF4148 75V 0A15 1005 SMT R7 7625 W100 10K0 1% 0805 SMT RES R96 7898 W125 1K02 0.1% 0805 SMT RES R197 7900 W125 30K 0.5% 0805 SMT RES
C2 7767 100N 16V 10%CAP 0603 SMT X7R C82 7813 _47P 50V 5%CAP 0805 SMT NPO D10 7889 ES3D 200V 3A0 D214 SMT SMC R8 7900 W125 30K 0.5% 0805 SMT RES R97 7900 W125 30K 0.5% 0805 SMT RES R198 7821 W125 10R0 1% 0805 SMT RES
C3 7878 __1U 25V 20%CAP 1206 SMT X7R C83 8139 _22U 25V 20%CAP 1210 SMT X7R D11 7889 ES3D 200V 3A0 D214 SMT SMC R9 7682 W125 17K8 1% 0805 SMT RES R98 4963 W125 64K9 1% 0805 SMT RES R199 7854 W125 47R 5% 0805 SMT RES
C4 7767 100N 16V 10%CAP 0603 SMT X7R C84 7813 _47P 50V 5%CAP 0805 SMT NPO D12 7889 ES3D 200V 3A0 D214 SMT SMC R10 7708 W100 200R 1% 0805 SMT RES R99 7673 W100 475R 1% 0805 SMT RES R200 7854 W125 47R 5% 0805 SMT RES
C5 7871 470P 50V 5%CAP 0603 SMT NPO C85 7871 470P 50V 5%CAP 0603 SMT NPO D13 7889 ES3D 200V 3A0 D214 SMT SMC R11 7854 W125 47R 5% 0805 SMT RES R100 7673 W100 475R 1% 0805 SMT RES R202 7866 W125 1M 5% 0805 SMT RES
C6 7767 100N 16V 10%CAP 0603 SMT X7R C86 7871 470P 50V 5%CAP 0603 SMT NPO D14 7889 ES3D 200V 3A0 D214 SMT SMC R12 7854 W125 47R 5% 0805 SMT RES R101 7633 W100 2K74 1% 0805 SMT RES R204 7852 W250 10R 5% 1206 SMT RES
C7 7969 _10U 16V 20%CAP 0805 SMT X5R C87 7603 680P 50V 5%CAP 0805 SMT C0G D15 7889 ES3D 200V 3A0 D214 SMT SMC R13 7854 W125 47R 5% 0805 SMT RES R102 7898 W125 1K02 0.1% 0805 SMT RES R205 7852 W250 10R 5% 1206 SMT RES
C8 7767 100N 16V 10%CAP 0603 SMT X7R C88 7871 470P 50V 5%CAP 0603 SMT NPO D16 7889 ES3D 200V 3A0 D214 SMT SMC R14 7854 W125 47R 5% 0805 SMT RES R103 7634 W100 20K5 1% 0805 SMT RES R206 7727 W100 4R7 5% 0805 SMT RES
C9 7767 100N 16V 10%CAP 0603 SMT X7R C89 7735 __4U7 50V 10%CAP 1210 SMT CER D17 7889 ES3D 200V 3A0 D214 SMT SMC R15 7624 W100 100R 1% 0805 SMT RES R104 7625 W100 10K0 1% 0805 SMT RES R207 7628 W100 15K0 1% 0805 SMT RES
C10 7767 100N 16V 10%CAP 0603 SMT X7R C90 5979 100N 50V 5%CAP 0805 SMT X7R D18 7889 ES3D 200V 3A0 D214 SMT SMC R16 7624 W100 100R 1% 0805 SMT RES R105 7625 W100 10K0 1% 0805 SMT RES R208 7640 W100 392R 1% 0805 SMT RES
C11 7969 _10U 16V 20%CAP 0805 SMT X5R C91 7696 _68N 50V 5%CAP 0805 SMT X7R D19 7889 ES3D 200V 3A0 D214 SMT SMC R17 7624 W100 100R 1% 0805 SMT RES R106 7854 W125 47R 5% 0805 SMT RES R209 7624 W100 100R 1% 0805 SMT RES
C12 7767 100N 16V 10%CAP 0603 SMT X7R C92 7871 470P 50V 5%CAP 0603 SMT NPO D20 7889 ES3D 200V 3A0 D214 SMT SMC R18 7682 W125 17K8 1% 0805 SMT RES R107 7625 W100 10K0 1% 0805 SMT RES R210 7689 W250 619R0 1% 1206 SMT RES
C13 7767 100N 16V 10%CAP 0603 SMT X7R C93 7813 _47P 50V 5%CAP 0805 SMT NPO D21 7889 ES3D 200V 3A0 D214 SMT SMC R19 7899 W125 1K800 0.1% 0805 SMT RES R108 7642 W100 4K75 1% 0805 SMT RES R211 7689 W250 619R0 1% 1206 SMT RES
C14 7969 _10U 16V 20%CAP 0805 SMT X5R C94 8139 _22U 25V 20%CAP 1210 SMT X7R D22 7889 ES3D 200V 3A0 D214 SMT SMC R20 7899 W125 1K800 0.1% 0805 SMT RES R109 7628 W100 15K0 1% 0805 SMT RES R212 7689 W250 619R0 1% 1206 SMT RES
C15 7767 100N 16V 10%CAP 0603 SMT X7R C95 7603 680P 50V 5%CAP 0805 SMT C0G D23 7889 ES3D 200V 3A0 D214 SMT SMC R21 7854 W125 47R 5% 0805 SMT RES R110 7899 W125 1K800 0.1% 0805 SMT RES R213 7689 W250 619R0 1% 1206 SMT RES
C16 7694 __3N3 25V 5%CAP 0805 SMT NPO C96 5979 100N 50V 5%CAP 0805 SMT X7R D24 7893 MBRA340T3 40V 3A SHTKY 403D SMT R22 7854 W125 47R 5% 0805 SMT RES R111 7899 W125 1K800 0.1% 0805 SMT RES R214 7674 W125 562R0 1% 0805 SMT RES
C17 7601 220N 50V 10%CAP 1206 SMT X7R C97 5979 100N 50V 5%CAP 0805 SMT X7R D25 7750 CDSF4148 75V 0A15 1005 SMT R23 7673 W100 475R 1% 0805 SMT RES R112 7642 W100 4K75 1% 0805 SMT RES R215 7624 W100 100R 1% 0805 SMT RES
C18 7969 _10U 16V 20%CAP 0805 SMT X5R C98 7767 100N 16V 10%CAP 0603 SMT X7R D26 7750 CDSF4148 75V 0A15 1005 SMT R24 7673 W100 475R 1% 0805 SMT RES R113 7642 W100 4K75 1% 0805 SMT RES R216 7624 W100 100R 1% 0805 SMT RES
C19 7767 100N 16V 10%CAP 0603 SMT X7R C99 8088 _10U 16V 10%CAP 0805 SMT X6S D27 7750 CDSF4148 75V 0A15 1005 SMT R25 7854 W125 47R 5% 0805 SMT RES R114 7708 W100 200R 1% 0805 SMT RES R217 7624 W100 100R 1% 0805 SMT RES
C20 7969 _10U 16V 20%CAP 0805 SMT X5R C100 7871 470P 50V 5%CAP 0603 SMT NPO D28 8080 SMAJ150CA 150V 400W BIDIR SMT R26 7854 W125 47R 5% 0805 SMT RES R115 7708 W100 200R 1% 0805 SMT RES R218 8103 W125 120K 1% 0805 SMT RES
C21 7819 _10U 10V 10%CAP 1206 SMT X5R C101 7966 __2N7 100V 10%CAP 0805 SMT X7R D31 7750 CDSF4148 75V 0A15 1005 SMT R27 7624 W100 100R 1% 0805 SMT RES R116 7708 W100 200R 1% 0805 SMT RES R219 8103 W125 120K 1% 0805 SMT RES
C22 7813 _47P 50V 5%CAP 0805 SMT NPO C102 5979 100N 50V 5%CAP 0805 SMT X7R D32 7750 CDSF4148 75V 0A15 1005 SMT R28 7859 W125 2K2 5% 0805 SMT RES R117 7708 W100 200R 1% 0805 SMT RES R220 8103 W125 120K 1% 0805 SMT RES
C23 7969 _10U 16V 20%CAP 0805 SMT X5R C103 7767 100N 16V 10%CAP 0603 SMT X7R D33 7832 MM3Z18VT1G 18V0 0W2 5% SMT ZEN R29 7866 W125 1M 5% 0805 SMT RES R118 7642 W100 4K75 1% 0805 SMT RES R221 8103 W125 120K 1% 0805 SMT RES
C24 7767 100N 16V 10%CAP 0603 SMT X7R C104 7819 _10U 10V 10%CAP 1206 SMT X5R D34 7750 CDSF4148 75V 0A15 1005 SMT R30 7625 W100 10K0 1% 0805 SMT RES R119 7642 W100 4K75 1% 0805 SMT RES R222 8103 W125 120K 1% 0805 SMT RES
C25 7969 _10U 16V 20%CAP 0805 SMT X5R C105 7819 _10U 10V 10%CAP 1206 SMT X5R D35 8080 SMAJ150CA 150V 400W BIDIR SMT R31 7895 FUSE SLOW 7A 125V SMT 6125 R120 7899 W125 1K800 0.1% 0805 SMT RES R223 8103 W125 120K 1% 0805 SMT RES
C26 7969 _10U 16V 20%CAP 0805 SMT X5R C106 7767 100N 16V 10%CAP 0603 SMT X7R D36 7750 CDSF4148 75V 0A15 1005 SMT R34 7895 FUSE SLOW 7A 125V SMT 6125 R121 7899 W125 1K800 0.1% 0805 SMT RES R224 4963 W125 64K9 1% 0805 SMT RES
C27 7969 _10U 16V 20%CAP 0805 SMT X5R C107 7819 _10U 10V 10%CAP 1206 SMT X5R D37 7750 CDSF4148 75V 0A15 1005 SMT R38 7852 W250 10R 5% 1206 SMT RES R122 7642 W100 4K75 1% 0805 SMT RES R225 4963 W125 64K9 1% 0805 SMT RES
C28 7969 _10U 16V 20%CAP 0805 SMT X5R C108 7767 100N 16V 10%CAP 0603 SMT X7R D38 7750 CDSF4148 75V 0A15 1005 SMT R42 7900 W125 30K 0.5% 0805 SMT RES R123 7628 W100 15K0 1% 0805 SMT RES R226 4963 W125 64K9 1% 0805 SMT RES
C29 7767 100N 16V 10%CAP 0603 SMT X7R C109 7819 _10U 10V 10%CAP 1206 SMT X5R D39 7750 CDSF4148 75V 0A15 1005 SMT R44 7852 W250 10R 5% 1206 SMT RES R124 7682 W125 17K8 1% 0805 SMT RES S1 3439 DPDT MINI PC VERT MOMENTARY
C30 7767 100N 16V 10%CAP 0603 SMT X7R C110 7766 _15P 50V 5%CAP 0603 SMT NPO D40 7750 CDSF4148 75V 0A15 1005 SMT R45 7859 W125 2K2 5% 0805 SMT RES R125 7633 W100 2K74 1% 0805 SMT RES S2 3522 DPDT MINI PC VERT SNP ALT
C31 7767 100N 16V 10%CAP 0603 SMT X7R C111 7767 100N 16V 10%CAP 0603 SMT X7R D41 7750 CDSF4148 75V 0A15 1005 SMT R46 7930 W250 22R 5% 1206 SMT RES R126 7682 W125 17K8 1% 0805 SMT RES S3 3439 DPDT MINI PC VERT MOMENTARY
C32 7767 100N 16V 10%CAP 0603 SMT X7R C112 7819 _10U 10V 10%CAP 1206 SMT X5R D42 7750 CDSF4148 75V 0A15 1005 SMT R47 7899 W125 1K800 0.1% 0805 SMT RES R127 7633 W100 2K74 1% 0805 SMT RES S4 3522 DPDT MINI PC VERT SNP ALT
C33 7767 100N 16V 10%CAP 0603 SMT X7R C113 7605 __1N5 50V 5%CAP 0805 SMT NPO D43 7750 CDSF4148 75V 0A15 1005 SMT R48 7898 W125 1K02 0.1% 0805 SMT RES R128 7637 W125 3K32 1% 0805 SMT RES U1 6793 PROC4 BLE MODULE 14X19MM SMT
C34 5979 100N 50V 5%CAP 0805 SMT X7R C114 7798 _15N 50V 5%CAP 0805 SMT C0G D44 7750 CDSF4148 75V 0A15 1005 SMT R49 7628 W100 15K0 1% 0805 SMT RES R129 7637 W125 3K32 1% 0805 SMT RES U2 7905 ADAU1701 28/56 DSP 2AD4DA SMT IC
C35 7767 100N 16V 10%CAP 0603 SMT X7R C115 7603 680P 50V 5%CAP 0805 SMT C0G HW1 8637 ROUND PUSH BUTTON 1/4" BLK 24MM R50 7673 W100 475R 1% 0805 SMT RES R130 7637 W125 3K32 1% 0805 SMT RES U3 8173 MKL15Z64VLH4 48MHZ MCU SMT LQFP64
C36 7969 _10U 16V 20%CAP 0805 SMT X5R C116 7603 680P 50V 5%CAP 0805 SMT C0G HW2 8637 ROUND PUSH BUTTON 1/4" BLK 24MM R51 7928 W125 10K00 0.1% 0805 SMT RES R131 7637 W125 3K32 1% 0805 SMT RES U4 7019 74LVC1G80 SNGL FILPFLOP SMT SOT753
C37 7767 100N 16V 10%CAP 0603 SMT X7R C117 5979 100N 50V 5%CAP 0805 SMT X7R HW3 8637 ROUND PUSH BUTTON 1/4" BLK 24MM R52 7866 W125 1M 5% 0805 SMT RES R132 7637 W125 3K32 1% 0805 SMT RES U5 7890 LM2671 3V3 REG 0A5 SMT SO8
C38 7886 __4U7 25V 20%CAP 4X5.5 SMT ELC C118 8088 _10U 16V 10%CAP 0805 SMT X6S HW4 8637 ROUND PUSH BUTTON 1/4" BLK 24MM R53 7681 W125 8K25 1% 0805 SMT RES R133 7637 W125 3K32 1% 0805 SMT RES U6 7817 33078 DUAL OPAMP SMT SO-8
C39 7769 __1U 50V 20%CAP 4.3X3.9 SMT ELC C119 7733 __4N7 50V 10%CAP 0805 SMT X7R J1 4090 1/4IN &XLR PCB MT VERT COMBO NCJ6-V R54 7625 W100 10K0 1% 0805 SMT RES R134 7625 W100 10K0 1% 0805 SMT RES U7 7817 33078 DUAL OPAMP SMT SO-8
C40 5910 4700U 100V 10%CAP BLK 35X40MM 4PS C120 7733 __4N7 50V 10%CAP 0805 SMT X7R J2 4140 XLR MALE PCB MT VERT 24MM A-SERIES R55 7866 W125 1M 5% 0805 SMT RES R135 7625 W100 10K0 1% 0805 SMT RES U8 7817 33078 DUAL OPAMP SMT SO-8
C41 5670 3300U 63V 20%CAP 18X40MM CUT5MM EL C121 7605 __1N5 50V 5%CAP 0805 SMT NPO J3 4090 1/4IN &XLR PCB MT VERT COMBO NCJ6-V R56 8137 W125 1K62 1% 0805 SMT RES R136 7625 W100 10K0 1% 0805 SMT RES U9 7817 33078 DUAL OPAMP SMT SO-8
C42 5860 3300U 35V 20%CAP BLK 16X35.5MM EL C122 5979 100N 50V 5%CAP 0805 SMT X7R J4 3466 RCA DUAL PCB MT VERT GOLD 24MM R57 7899 W125 1K800 0.1% 0805 SMT RES R137 7898 W125 1K02 0.1% 0805 SMT RES U10 7817 33078 DUAL OPAMP SMT SO-8
C43 5860 3300U 35V 20%CAP BLK 16X35.5MM EL C123 7798 _15N 50V 5%CAP 0805 SMT C0G J5 4010 XLR FEML PCB MT VERT 24MM AA-SERIES R58 7898 W125 1K02 0.1% 0805 SMT RES R138 7642 W100 4K75 1% 0805 SMT RES U11 7817 33078 DUAL OPAMP SMT SO-8
C44 5670 3300U 63V 20%CAP 18X40MM CUT5MM EL C124 8088 _10U 16V 10%CAP 0805 SMT X6S K1 3696 RELAY 1C 02AMP DC24 006MA PC-S R59 7673 W100 475R 1% 0805 SMT RES R142 7866 W125 1M 5% 0805 SMT RES U12 7668 MC33079D QUAD OPAMP SMT SO14
C45 5910 4700U 100V 10%CAP BLK 35X40MM 4PS C125 7603 680P 50V 5%CAP 0805 SMT C0G L1 8256 FERRITE BEAD 600R @100MHZ 0805 SMT R60 7928 W125 10K00 0.1% 0805 SMT RES R143 7866 W125 1M 5% 0805 SMT RES U13 7817 33078 DUAL OPAMP SMT SO-8
C46 5242 100N 250V 20%CAP BLK 'X2' 15MM AC C126 7603 680P 50V 5%CAP 0805 SMT C0G L2 8256 FERRITE BEAD 600R @100MHZ 0805 SMT R61 7628 W100 15K0 1% 0805 SMT RES R144 8103 W125 120K 1% 0805 SMT RES U15 7918 LM1117 REGULATOR 5V0 SMT SOT223
C47 5266 680N 250V 20%CAP BLK 'X2' 27MM AC C127 7813 _47P 50V 5%CAP 0805 SMT NPO L3 8256 FERRITE BEAD 600R @100MHZ 0805 SMT R62 7642 W100 4K75 1% 0805 SMT RES R145 8103 W125 120K 1% 0805 SMT RES U16 8122 PCM1796 DAC STEREO DIFF SSOP28 SMT
C48 6451 __4N7 250V 20%CAP BLK 'Y' 10MM AC C128 7813 _47P 50V 5%CAP 0805 SMT NPO L4 8256 FERRITE BEAD 600R @100MHZ 0805 SMT R63 7708 W100 200R 1% 0805 SMT RES R146 8103 W125 120K 1% 0805 SMT RES U17 7668 MC33079D QUAD OPAMP SMT SO14
C49 7966 __2N7 100V 10%CAP 0805 SMT X7R C129 7813 _47P 50V 5%CAP 0805 SMT NPO L5 6492 1300UH COIL COMMON MODE 4AMP R64 6543 48R 265V RESETTABLE THERMISTOR PTC R147 7854 W125 47R 5% 0805 SMT RES U19 8279 AK5572 STDIF 32BIT ADC SMT QFN48
C50 7813 _47P 50V 5%CAP 0805 SMT NPO C130 7697 _22U 16V 5%CAP 5X5.5 SMT ELC L6 8283 __4.7UH 20% COIL 12MM SMT R65 7898 W125 1K02 0.1% 0805 SMT RES R148 7854 W125 47R 5% 0805 SMT RES U20 7019 74LVC1G80 SNGL FILPFLOP SMT SOT753
C51 5933 __4U7 100DC10%CAP BLK RAD POLYE FLM C131 7697 _22U 16V 5%CAP 5X5.5 SMT ELC L7 6562 _192UH CHOKE 74T20AWG/77256MAGNTKS R66 7633 W100 2K74 1% 0805 SMT RES R149 7854 W125 47R 5% 0805 SMT RES W2 6535 HEADER:SIL 26 SOCKET
C52 5979 100N 50V 5%CAP 0805 SMT X7R C132 7927 100P 50V 10%CAP 0805 SMT NPO L8 7730 __2.2UH COIL SMT R67 7928 W125 10K00 0.1% 0805 SMT RES R150 7854 W125 47R 5% 0805 SMT RES W3 4018 10 CIR WAFER DIL VT 0.1
C53 7809 _10U 16V 20%CAP 5X5.4 SMT NP C133 7969 _10U 16V 20%CAP 0805 SMT X5R L9 2910 120.0UH COIL SR4018T 1R6 SMT R68 7928 W125 10K00 0.1% 0805 SMT RES R151 7854 W125 47R 5% 0805 SMT RES W4_ 3966 GRN 16AWG PREFUSED WIRE
C54 7737 _10N 50V 10%CAP 0805 SMT X7R C134 7969 _10U 16V 20%CAP 0805 SMT X5R L10 8256 FERRITE BEAD 600R @100MHZ 0805 SMT R69 7900 W125 30K 0.5% 0805 SMT RES R152 7854 W125 47R 5% 0805 SMT RES W6 2328 8 CIR XH-HEADER 0.098IN
C55 8140 _15U 35V 10%CAP 6032 SMT TNT C135 7767 100N 16V 10%CAP 0603 SMT X7R L11 2906 486UH COIL COMMON MODE 8A SMT R70 7682 W125 17K8 1% 0805 SMT RES R153 7854 W125 47R 5% 0805 SMT RES W6_ 2328 8 CIR XH-HEADER 0.098IN
C56 8141 100U 10V 20%CAP 3528 SMT TNT C136 7767 100N 16V 10%CAP 0603 SMT X7R L12 8256 FERRITE BEAD 600R @100MHZ 0805 SMT R71 7646 W125 681R 1% 0805 SMT RES R154 7854 W125 47R 5% 0805 SMT RES W7 2327 6 CIR XH-HEADER 0.098IN
C57 7819 _10U 10V 10%CAP 1206 SMT X5R C137 8141 100U 10V 20%CAP 3528 SMT TNT LD1 8155 YEL LED 2V0 20MA 3216 SMT R72 7822 W100 7K50 1% 0805 SMT RES R155 7854 W125 47R 5% 0805 SMT RES W7_ 2327 6 CIR XH-HEADER 0.098IN
C58 7966 __2N7 100V 10%CAP 0805 SMT X7R C138 7969 _10U 16V 20%CAP 0805 SMT X5R LD2 6001 RD/GN/BL LED 2V1 20MA 0606 SMT R73 7898 W125 1K02 0.1% 0805 SMT RES R156 7930 W250 22R 5% 1206 SMT RES W8 4145 9PIN 3X3 POWER PIN HEADER
C59 5979 100N 50V 5%CAP 0805 SMT X7R C139 7767 100N 16V 10%CAP 0603 SMT X7R LD4 8154 RED LED 1V9 20MA 1206 SMT R74 7928 W125 10K00 0.1% 0805 SMT RES R157 7854 W125 47R 5% 0805 SMT RES W9 4147 6 PIN POWER PIN HEADER MALE POLZED
C60 5979 100N 50V 5%CAP 0805 SMT X7R C140 7969 _10U 16V 20%CAP 0805 SMT X5R P1 4462 _50K BLIN 9MM P32 R75 7928 W125 10K00 0.1% 0805 SMT RES R158 7854 W125 47R 5% 0805 SMT RES W10 4147 6 PIN POWER PIN HEADER MALE POLZED
C61 5979 100N 50V 5%CAP 0805 SMT X7R C141 5979 100N 50V 5%CAP 0805 SMT X7R P2 4459 _10K B LIN 9MM DET HI TORQ P32 R76 7898 W125 1K02 0.1% 0805 SMT RES R175 7898 W125 1K02 0.1% 0805 SMT RES W11 4162 2 PIN POWER PIN HEADER MALE POLZED
C62 7927 100P 50V 10%CAP 0805 SMT NPO C142 7809 _10U 16V 20%CAP 5X5.4 SMT NP P3 4459 _10K B LIN 9MM DET HI TORQ P32 R77 7625 W100 10K0 1% 0805 SMT RES R176 7649 W125 1K50 1% 0805 SMT RES W12 3538 24 PIN BREAKAWAY LOCK .156
C63 7871 470P 50V 5%CAP 0603 SMT NPO C143 5979 100N 50V 5%CAP 0805 SMT X7R PCB1 M1497BLANK 1_OZ 2SD 73.26SQIN 01PR EF15/12 R78 7928 W125 10K00 0.1% 0805 SMT RES R177 7624 W100 100R 1% 0805 SMT RES
C64 7871 470P 50V 5%CAP 0603 SMT NPO C144 5979 100N 50V 5%CAP 0805 SMT X7R Q1 7837 MMBT5401 PNP SOT-23 SMT R79 7928 W125 10K00 0.1% 0805 SMT RES R178 7649 W125 1K50 1% 0805 SMT RES
C65 7799 __5N6 50V 5%CAP 0805 SMT C0G C145 7769 __1U 50V 20%CAP 4.3X3.9 SMT ELC Q2 7894 12.288MHZ CRYSTAL 4-PIN SMT R80 7625 W100 10K0 1% 0805 SMT RES R179 7649 W125 1K50 1% 0805 SMT RES
C66 7809 _10U 16V 20%CAP 5X5.4 SMT NP C146 7769 __1U 50V 20%CAP 4.3X3.9 SMT ELC Q3 7701 MMBTA14 NPN DARL SOT-23 SMT R81 7633 W100 2K74 1% 0805 SMT RES R180 7624 W100 100R 1% 0805 SMT RES
C67 7871 470P 50V 5%CAP 0603 SMT NPO C147 7917 _33U 25V 20%CAP 6.3X5.5 SMT EL Q4 7837 MMBT5401 PNP SOT-23 SMT R82 7897 W125 330R 0.5% 0805 SMT RES R181 7678 W125 3K92 1% 0805 SMT RES
C68 7966 __2N7 100V 10%CAP 0805 SMT X7R C148 7917 _33U 25V 20%CAP 6.3X5.5 SMT EL Q5 7915 T810-600G-TR 8A TRIAC D2PAK SMT R83 7898 W125 1K02 0.1% 0805 SMT RES R182 7649 W125 1K50 1% 0805 SMT RES
C69 5979 100N 50V 5%CAP 0805 SMT X7R C149 7769 __1U 50V 20%CAP 4.3X3.9 SMT ELC Q6 5190 MBS4992 TO92 8V5 DIAC T&R R84 7898 W125 1K02 0.1% 0805 SMT RES R183 7624 W100 100R 1% 0805 SMT RES
C70 5979 100N 50V 5%CAP 0805 SMT X7R C150 5979 100N 50V 5%CAP 0805 SMT X7R Q7 7701 MMBTA14 NPN DARL SOT-23 SMT R85 7897 W125 330R 0.5% 0805 SMT RES R184 7642 W100 4K75 1% 0805 SMT RES
C71 5979 100N 50V 5%CAP 0805 SMT X7R C151 5982 150P 1000V 5%CAP 1206 SMT C0G Q8 7837 MMBT5401 PNP SOT-23 SMT R86 7625 W100 10K0 1% 0805 SMT RES R185 7649 W125 1K50 1% 0805 SMT RES
C72 7966 __2N7 100V 10%CAP 0805 SMT X7R C152 5982 150P 1000V 5%CAP 1206 SMT C0G Q9 7986 2N7002 NCH FET SOT-23 SMT T&R R87 7928 W125 10K00 0.1% 0805 SMT RES R186 7642 W100 4K75 1% 0805 SMT RES
C73 7927 100P 50V 10%CAP 0805 SMT NPO C153 5982 150P 1000V 5%CAP 1206 SMT C0G Q10 7986 2N7002 NCH FET SOT-23 SMT T&R R88 7928 W125 10K00 0.1% 0805 SMT RES R187 7649 W125 1K50 1% 0805 SMT RES
C74 5979 100N 50V 5%CAP 0805 SMT X7R D1 8085 ES1H 500V 1A0 D214 UPGT 8814 Q11 7986 2N7002 NCH FET SOT-23 SMT T&R R89 7633 W100 2K74 1% 0805 SMT RES R188 7624 W100 100R 1% 0805 SMT RES
C75 7969 _10U 16V 20%CAP 0805 SMT X5R D2 8085 ES1H 500V 1A0 D214 UPGT 8814 Q15 6817 MJD112 NPN DARL DPAK3 SMT R90 7625 W100 10K0 1% 0805 SMT RES R189 7930 W250 22R 5% 1206 SMT RES
C76 5979 100N 50V 5%CAP 0805 SMT X7R D3 8275 MMBZ5252B 24V0 0W35 5% SMT ZEN Q16 7838 MMBT3904 NPN SOT-23 SMT R91 7625 W100 10K0 1% 0805 SMT RES R192 7649 W125 1K50 1% 0805 SMT RES
C77 5979 100N 50V 5%CAP 0805 SMT X7R D4 7750 CDSF4148 75V 0A15 1005 SMT R1 7854 W125 47R 5% 0805 SMT RES R92 7673 W100 475R 1% 0805 SMT RES R193 7649 W125 1K50 1% 0805 SMT RES
C78 7871 470P 50V 5%CAP 0603 SMT NPO D6 7914 MMBZ5231B 5V1 0W35 5% SMT ZEN R2 7673 W100 475R 1% 0805 SMT RES R93 7673 W100 475R 1% 0805 SMT RES R194 7739 W250 1R 5% 1206 SMT RES
C79 7927 100P 50V 10%CAP 0805 SMT NPO D7 7832 MM3Z18VT1G 18V0 0W2 5% SMT ZEN R3 7898 W125 1K02 0.1% 0805 SMT RES R94 7633 W100 2K74 1% 0805 SMT RES R195 7821 W125 10R0 1% 0805 SMT RES
M1498 02 Parts Reference List 9/25/2020
REF YS # Description REF YS # Description REF YS # Description
C1 7871 470P 50V 5%CAP 0603 SMT NPO R5 7621 W100 1K0 1% 0805 SMT RES R136 7867 W500 2K2 5% 2010 SMT RES
C2 7969 _10U 16V 20%CAP 0805 SMT X5R R6 7867 W500 2K2 5% 2010 SMT RES R137 8095 1W00 10K 5% 2512 SMT RES
C3 8088 _10U 16V 10%CAP 0805 SMT X6S R7 7866 W125 1M 5% 0805 SMT RES R138 7624 W100 100R 1% 0805 SMT RES
C4 7737 _10N 50V 10%CAP 0805 SMT X7R R8 7852 W250 10R 5% 1206 SMT RES R139 7624 W100 100R 1% 0805 SMT RES
C5 7738 _10U 16V 10%CAP 1206 SMT X7R R9 7672 W125 348R0 1% 0805 SMT RES R140 8095 1W00 10K 5% 2512 SMT RES
C6 7969 _10U 16V 20%CAP 0805 SMT X5R R10 7637 W125 3K32 1% 0805 SMT RES R141 7867 W500 2K2 5% 2010 SMT RES
C7 7733 __4N7 50V 10%CAP 0805 SMT X7R R11 7637 W125 3K32 1% 0805 SMT RES TP1 8002 TEST POINT MINIATURE SMT
C8 7733 __4N7 50V 10%CAP 0805 SMT X7R R12 8012 1W00 4R7 5% 2512 SMT RES TP2 8002 TEST POINT MINIATURE SMT
C9 8092 100N 450V 10%CAP 1206 SMT X7T R13 7822 W100 7K50 1% 0805 SMT RES U1 7661 LM393D DUAL COMPARATOR SMT SO-8
C10 7748 _47P 100V 5%CAP 0805 SMT NPO R14 8012 1W00 4R7 5% 2512 SMT RES U3 7884 IRS20957S DIG AUDIO DRVR SMT SOIC
C11 7878 __1U 25V 20%CAP 1206 SMT X7R R15 7637 W125 3K32 1% 0805 SMT RES U5 7993 TL071CDR OPAMP JFET 3MHZ SO-8 SMT
C12 8577 _10U 25V 10%CAP 1210 SMT X7R R16 8133 1W00 1K 5% 2512 SMT RES U13 6851 OPA1652 DUAL OPAMP SMT SO8
C13 8092 100N 450V 10%CAP 1206 SMT X7T R18 7853 W250 100R 5% 1206 SMT RES W1 7883 26 PIN 25SQ 100 PIN SIL SMT
C14 7876 __2U2 200V 20%CAP 3025 SMT CER R19 7867 W500 2K2 5% 2010 SMT RES ZD1 7615 MMBZ5246B 16V0 0W35 5% SMT ZEN3
C15 7876 __2U2 200V 20%CAP 3025 SMT CER R20 7637 W125 3K32 1% 0805 SMT RES ZD6 7831 MM3Z15VT1G 15V0 0W2 5% SMT ZEN
C16 7877 __2U2 100V 20%CAP 1812 SMT X7R R21 7637 W125 3K32 1% 0805 SMT RES ZD7 7831 MM3Z15VT1G 15V0 0W2 5% SMT ZEN
C17 7877 __2U2 100V 20%CAP 1812 SMT X7R R22 7865 W125 150K 5% 0805 SMT RES ZD8 7615 MMBZ5246B 16V0 0W35 5% SMT ZEN3
C18 5979 100N 50V 5%CAP 0805 SMT X7R R23 7863 W125 33K 5% 0805 SMT RES ZD9 7615 MMBZ5246B 16V0 0W35 5% SMT ZEN3
C19 7878 __1U 25V 20%CAP 1206 SMT X7R R24 7626 W100 100K0 1% 0805 SMT RES ZD10 7615 MMBZ5246B 16V0 0W35 5% SMT ZEN3
C21 5979 100N 50V 5%CAP 0805 SMT X7R R25 8160 W125 91K 5% 0805 SMT RES
C23 8577 _10U 25V 10%CAP 1210 SMT X7R R26 7745 W125 0R 5% 0805 SMT RES
C25 7809 _10U 16V 20%CAP 5X5.4 SMT NP R27 7745 W125 0R 5% 0805 SMT RES
C26 7809 _10U 16V 20%CAP 5X5.4 SMT NP R28 7637 W125 3K32 1% 0805 SMT RES
C27 7916 _10U 25V 20%CAP 5X5.4 SMT EL R29 7882 W250 0R 1206 SMT RES
C28 7916 _10U 25V 20%CAP 5X5.4 SMT EL R31 8157 1W00 47K 5% 2512 SMT RES
C29 7875 100N 100V 10%CAP 1206 SMT X7R R32 5069 W750 0R 1% 6A 2010 SMT JMP
C32 7875 100N 100V 10%CAP 1206 SMT X7R R34 7745 W125 0R 5% 0805 SMT RES
C37 7748 _47P 100V 5%CAP 0805 SMT NPO R35 7625 W100 10K0 1% 0805 SMT RES
C61 7693 __1N 50V 5%CAP 0805 SMT NPO R38 8094 1W00 33K 5% 2512 SMT RES
C64 7748 _47P 100V 5%CAP 0805 SMT NPO R39 8012 1W00 4R7 5% 2512 SMT RES
C69 5979 100N 50V 5%CAP 0805 SMT X7R R40 8012 1W00 4R7 5% 2512 SMT RES
D1 7984 BAS21L 250V 200MA SOT23 SMT R41 8093 1W00 15K 5% 2512 SMT RES
D2 7848 MURA240T3 400V 2A DIO 403D SMT R42 7621 W100 1K0 1% 0805 SMT RES
D3 7848 MURA240T3 400V 2A DIO 403D SMT R43 7867 W500 2K2 5% 2010 SMT RES
D5 7914 MMBZ5231B 5V1 0W35 5% SMT ZEN R44 5063 W500 220R 1% 1210 SMT RES
D5_3T 7848 MURA240T3 400V 2A DIO 403D SMT R45 5064 1W00 0R27 1% 75PPM 2010 SMT RES
D6 7914 MMBZ5231B 5V1 0W35 5% SMT ZEN R46 5063 W500 220R 1% 1210 SMT RES
D6_3T 7848 MURA240T3 400V 2A DIO 403D SMT R47 7621 W100 1K0 1% 0805 SMT RES
D7 7832 MM3Z18VT1G 18V0 0W2 5% SMT ZEN R48 5064 1W00 0R27 1% 75PPM 2010 SMT RES
D8 8109 BAV21WS 200V 0A2 SOD323 SMT R49 5064 1W00 0R27 1% 75PPM 2010 SMT RES
D9 8109 BAV21WS 200V 0A2 SOD323 SMT R50 5064 1W00 0R27 1% 75PPM 2010 SMT RES
D10 7984 BAS21L 250V 200MA SOT23 SMT R51 5063 W500 220R 1% 1210 SMT RES
D11 7831 MM3Z15VT1G 15V0 0W2 5% SMT ZEN R52 5063 W500 220R 1% 1210 SMT RES
D12 7848 MURA240T3 400V 2A DIO 403D SMT R53 7867 W500 2K2 5% 2010 SMT RES
D13 8109 BAV21WS 200V 0A2 SOD323 SMT R54 7867 W500 2K2 5% 2010 SMT RES
D14 8109 BAV21WS 200V 0A2 SOD323 SMT R55 7867 W500 2K2 5% 2010 SMT RES
D15 7832 MM3Z18VT1G 18V0 0W2 5% SMT ZEN R56 7624 W100 100R 1% 0805 SMT RES
D17 8109 BAV21WS 200V 0A2 SOD323 SMT R57 8095 1W00 10K 5% 2512 SMT RES
D30A 7750 CDSF4148 75V 0A15 1005 SMT R58 8095 1W00 10K 5% 2512 SMT RES
D36 7984 BAS21L 250V 200MA SOT23 SMT R59 7624 W100 100R 1% 0805 SMT RES
D37 7984 BAS21L 250V 200MA SOT23 SMT R60 5069 W750 0R 1% 6A 2010 SMT JMP
D38 7984 BAS21L 250V 200MA SOT23 SMT R61 7882 W250 0R 1206 SMT RES
D42 7984 BAS21L 250V 200MA SOT23 SMT R61_3T 7745 W125 0R 5% 0805 SMT RES
M1498 7882 W250 0R 1206 SMT RES R63 8078 1W00 0R 5% 2512 SMT RES
P6 4512 _10K 25% ACP KAP TRIM POT SMT T&R R64 7882 W250 0R 1206 SMT RES
PCB1 X8025BLANK 2_OZ 1SD 107.5SQIN 08PER ALUM 1.5MM R66 7626 W100 100K0 1% 0805 SMT RES
Q2 7837 MMBT5401 PNP SOT-23 SMT R72 7635 W100 221R 1% 0805 SMT RES
Q3 7806 MMBF4391LT1 NCH JFET SOT-23 SMT T&R R76 7882 W250 0R 1206 SMT RES
Q4 7844 MJD243T4G NPN DPAK3 SMT TS R79 7637 W125 3K32 1% 0805 SMT RES
Q5 7968 IRFS4227PBF NCH MFET D2PAK SMT TS R82 7882 W250 0R 1206 SMT RES
Q6 7968 IRFS4227PBF NCH MFET D2PAK SMT TS R87 7882 W250 0R 1206 SMT RES
Q7 7846 MC7815BDTG POS REG SMT DPAK3 R97_3T 7745 W125 0R 5% 0805 SMT RES
Q8 7847 MC79M15CDTG NEG REG SMT DPAK3 R99 8133 1W00 1K 5% 2512 SMT RES
Q9 7840 IRF530NS NCH MFET D2PAK SMT TS R109 7866 W125 1M 5% 0805 SMT RES
Q10 7840 IRF530NS NCH MFET D2PAK SMT TS R112 7856 W125 470R 5% 0805 SMT RES
Q11 7017 2SC4027 NPN DPAK3 SMT TR R113 7625 W100 10K0 1% 0805 SMT RES
Q12 7017 2SC4027 NPN DPAK3 SMT TR R114 8137 W125 1K62 1% 0805 SMT RES
Q13 6848 STB13007DT4 NPN D2PAK SMT R116 7850 PTC RESETTABLE 1.5A 6V 1812L SMT
Q14 7806 MMBF4391LT1 NCH JFET SOT-23 SMT T&R R117 7649 W125 1K50 1% 0805 SMT RES
Q15 6848 STB13007DT4 NPN D2PAK SMT R118 7633 W100 2K74 1% 0805 SMT RES
Q16 7016 2SA1552 PNP DPAK3 SMT TR R119 7856 W125 470R 5% 0805 SMT RES
Q17 8022 MMBTA64LT1G PNP DARL SOT-23 SMT R120 4995 W125 14K0 1% 0805 SMT RES
Q18 7016 2SA1552 PNP DPAK3 SMT TR R121 7625 W100 10K0 1% 0805 SMT RES
Q19 6848 STB13007DT4 NPN D2PAK SMT R125 7628 W100 15K0 1% 0805 SMT RES
Q20 6848 STB13007DT4 NPN D2PAK SMT R126 7682 W125 17K8 1% 0805 SMT RES
Q21 7839 IRF9530NS PCH MFET D2PAK SMT TS R127 7856 W125 470R 5% 0805 SMT RES
Q22 7839 IRF9530NS PCH MFET D2PAK SMT TS R130 7628 W100 15K0 1% 0805 SMT RES
R1 7633 W100 2K74 1% 0805 SMT RES R131 7854 W125 47R 5% 0805 SMT RES
R2 7833 _47K 5% THERMISTOR NTC 0603 SMT R132 7854 W125 47R 5% 0805 SMT RES
R4 7625 W100 10K0 1% 0805 SMT RES R134 7635 W100 221R 1% 0805 SMT RES
M1802 Parts Reference List 12/13/2018
REF YS # Description REF YS # Description REF YS # Description REF YS # Description REF YS # Description
C1 7878 __1U 25V 20%CAP 1206 SMT X7R C95 7603 680P 50V 5%CAP 0805 SMT C0G J2 4140 XLR MALE PCB MT VERT 24MM A-SERIES R73 7898 W125 1K02 0.1% 0805 SMT RES R175 7898 W125 1K02 0.1% 0805 SMT RES
C2 7767 100N 16V 10%CAP 0603 SMT X7R C96 5979 100N 50V 5%CAP 0805 SMT X7R J3 4090 1/4IN &XLR PCB MT VERT COMBO NCJ6-V R74 7928 W125 10K00 0.1% 0805 SMT RES R176 7649 W125 1K50 1% 0805 SMT RES
C3 7878 __1U 25V 20%CAP 1206 SMT X7R C97 5979 100N 50V 5%CAP 0805 SMT X7R J4 4218 3.5MM JCK PCB MT V ST 5PIN SUB 4186 R75 7928 W125 10K00 0.1% 0805 SMT RES R177 7624 W100 100R 1% 0805 SMT RES
C4 7767 100N 16V 10%CAP 0603 SMT X7R C98 7767 100N 16V 10%CAP 0603 SMT X7R J5 4010 XLR FEML PCB MT VERT 24MM AA-SERIES R76 7898 W125 1K02 0.1% 0805 SMT RES R178 7649 W125 1K50 1% 0805 SMT RES
C5 7871 470P 50V 5%CAP 0603 SMT NPO C99 8088 _10U 16V 10%CAP 0805 SMT X6S K1 3696 RELAY 1C 02AMP DC24 006MA PC-S R77 7625 W100 10K0 1% 0805 SMT RES R179 7649 W125 1K50 1% 0805 SMT RES
C6 7767 100N 16V 10%CAP 0603 SMT X7R C100 7871 470P 50V 5%CAP 0603 SMT NPO L1 8256 FERRITE BEAD 600R @100MHZ 0805 SMT R78 7928 W125 10K00 0.1% 0805 SMT RES R180 7624 W100 100R 1% 0805 SMT RES
C7 7969 _10U 10V 20%CAP 0805 SMT Y5V C101 7966 __2N7 100V 10%CAP 0805 SMT X7R L2 8256 FERRITE BEAD 600R @100MHZ 0805 SMT R79 7928 W125 10K00 0.1% 0805 SMT RES R181 7678 W125 3K92 1% 0805 SMT RES
C8 7767 100N 16V 10%CAP 0603 SMT X7R C102 5979 100N 50V 5%CAP 0805 SMT X7R L3 8256 FERRITE BEAD 600R @100MHZ 0805 SMT R80 7625 W100 10K0 1% 0805 SMT RES R182 7649 W125 1K50 1% 0805 SMT RES
C9 7767 100N 16V 10%CAP 0603 SMT X7R C103 7767 100N 16V 10%CAP 0603 SMT X7R L4 8256 FERRITE BEAD 600R @100MHZ 0805 SMT R81 7633 W100 2K74 1% 0805 SMT RES R183 7624 W100 100R 1% 0805 SMT RES
C10 7767 100N 16V 10%CAP 0603 SMT X7R C104 7819 _10U 10V 10%CAP 1206 SMT X5R L8 7730 __2.2UH COIL SMT R82 7897 W125 330R 0.5% 0805 SMT RES R184 7642 W100 4K75 1% 0805 SMT RES
C11 7969 _10U 10V 20%CAP 0805 SMT Y5V C105 7819 _10U 10V 10%CAP 1206 SMT X5R L9 2910 120.0UH COIL SR4018T 1R6 SMT R83 7898 W125 1K02 0.1% 0805 SMT RES R185 7649 W125 1K50 1% 0805 SMT RES
C12 7767 100N 16V 10%CAP 0603 SMT X7R C106 7767 100N 16V 10%CAP 0603 SMT X7R L10 8256 FERRITE BEAD 600R @100MHZ 0805 SMT R84 7898 W125 1K02 0.1% 0805 SMT RES R186 7642 W100 4K75 1% 0805 SMT RES
C13 7767 100N 16V 10%CAP 0603 SMT X7R C107 7819 _10U 10V 10%CAP 1206 SMT X5R L12 8256 FERRITE BEAD 600R @100MHZ 0805 SMT R85 7897 W125 330R 0.5% 0805 SMT RES R187 7649 W125 1K50 1% 0805 SMT RES
C14 7969 _10U 10V 20%CAP 0805 SMT Y5V C108 7767 100N 16V 10%CAP 0603 SMT X7R LD1 7032 YEL LED 1V7 20MA 1206 SMT R86 7625 W100 10K0 1% 0805 SMT RES R188 7624 W100 100R 1% 0805 SMT RES
C15 7767 100N 16V 10%CAP 0603 SMT X7R C109 7819 _10U 10V 10%CAP 1206 SMT X5R LD2 6001 RD/GN/BL LED 2V1 20MA 0606 SMT R87 7928 W125 10K00 0.1% 0805 SMT RES R189 7930 W250 22R 5% 1206 SMT RES
C16 7694 __3N3 25V 5%CAP 0805 SMT NPO C110 7766 _15P 50V 5%CAP 0603 SMT NPO LD4 7033 RED LED 1V5 20MA 1206 SMT R88 7928 W125 10K00 0.1% 0805 SMT RES R192 7649 W125 1K50 1% 0805 SMT RES
C17 7601 220N 50V 10%CAP 1206 SMT X7R C111 7767 100N 16V 10%CAP 0603 SMT X7R P1 4434 _10K B LIN 9MM DETENT P32 R89 7633 W100 2K74 1% 0805 SMT RES R193 7649 W125 1K50 1% 0805 SMT RES
C18 7969 _10U 10V 20%CAP 0805 SMT Y5V C112 7819 _10U 10V 10%CAP 1206 SMT X5R P2 4432 _10K B LIN 9MM P32 R90 7625 W100 10K0 1% 0805 SMT RES R194 7739 W250 1R 5% 1206 SMT RES
C19 7767 100N 16V 10%CAP 0603 SMT X7R C113 7605 __1N5 50V 5%CAP 0805 SMT NPO P3 4432 _10K B LIN 9MM P32 R91 7625 W100 10K0 1% 0805 SMT RES R195 7852 W250 10R 5% 1206 SMT RES
C20 7969 _10U 10V 20%CAP 0805 SMT Y5V C114 7798 _15N 50V 5%CAP 0805 SMT C0G PCB1 M1802BLANK 2_OZ 2SD 46.06SQIN 02PR EF15/12/10P R92 7673 W100 475R 1% 0805 SMT RES R196 7900 W125 30K 0.5% 0805 SMT RES
C21 7819 _10U 10V 10%CAP 1206 SMT X5R C115 7603 680P 50V 5%CAP 0805 SMT C0G Q1 7837 MMBT5401 PNP SOT-23 SMT R93 7673 W100 475R 1% 0805 SMT RES R197 7900 W125 30K 0.5% 0805 SMT RES
C22 7813 _47P 50V 5%CAP 0805 SMT NPO C116 7603 680P 50V 5%CAP 0805 SMT C0G Q2 7894 12.288MHZ CRYSTAL 4-PIN SMT R94 7633 W100 2K74 1% 0805 SMT RES R198 7852 W250 10R 5% 1206 SMT RES
C23 7969 _10U 10V 20%CAP 0805 SMT Y5V C117 5979 100N 50V 5%CAP 0805 SMT X7R Q3 7701 MMBTA14 NPN DARL SOT-23 SMT R95 7625 W100 10K0 1% 0805 SMT RES R199 7854 W125 47R 5% 0805 SMT RES
C24 7767 100N 16V 10%CAP 0603 SMT X7R C118 8088 _10U 16V 10%CAP 0805 SMT X6S Q7 7701 MMBTA14 NPN DARL SOT-23 SMT R96 7898 W125 1K02 0.1% 0805 SMT RES R200 7854 W125 47R 5% 0805 SMT RES
C25 7969 _10U 10V 20%CAP 0805 SMT Y5V C119 7733 __4N7 50V 10%CAP 0805 SMT X7R Q8 7837 MMBT5401 PNP SOT-23 SMT R97 7900 W125 30K 0.5% 0805 SMT RES R202 7866 W125 1M 5% 0805 SMT RES
C26 7969 _10U 10V 20%CAP 0805 SMT Y5V C120 7733 __4N7 50V 10%CAP 0805 SMT X7R Q9 7986 2N7002 NCH FET SOT-23 SMT T&R R98 4963 W125 64K9 1% 0805 SMT RES R209 7624 W100 100R 1% 0805 SMT RES
C27 7969 _10U 10V 20%CAP 0805 SMT Y5V C121 7605 __1N5 50V 5%CAP 0805 SMT NPO Q10 7986 2N7002 NCH FET SOT-23 SMT T&R R99 7673 W100 475R 1% 0805 SMT RES R210 7689 W250 619R0 1% 1206 SMT RES
C28 7969 _10U 10V 20%CAP 0805 SMT Y5V C122 5979 100N 50V 5%CAP 0805 SMT X7R Q11 7986 2N7002 NCH FET SOT-23 SMT T&R R100 7673 W100 475R 1% 0805 SMT RES R211 7689 W250 619R0 1% 1206 SMT RES
C29 7767 100N 16V 10%CAP 0603 SMT X7R C123 7798 _15N 50V 5%CAP 0805 SMT C0G R1 7854 W125 47R 5% 0805 SMT RES R101 7633 W100 2K74 1% 0805 SMT RES R212 7689 W250 619R0 1% 1206 SMT RES
C30 7767 100N 16V 10%CAP 0603 SMT X7R C124 8088 _10U 16V 10%CAP 0805 SMT X6S R2 7673 W100 475R 1% 0805 SMT RES R102 7898 W125 1K02 0.1% 0805 SMT RES R213 7689 W250 619R0 1% 1206 SMT RES
C31 7767 100N 16V 10%CAP 0603 SMT X7R C125 7603 680P 50V 5%CAP 0805 SMT C0G R3 7898 W125 1K02 0.1% 0805 SMT RES R103 7634 W100 20K5 1% 0805 SMT RES R214 7674 W125 562R0 1% 0805 SMT RES
C32 7767 100N 16V 10%CAP 0603 SMT X7R C126 7603 680P 50V 5%CAP 0805 SMT C0G R5 7624 W100 100R 1% 0805 SMT RES R104 7625 W100 10K0 1% 0805 SMT RES R215 7624 W100 100R 1% 0805 SMT RES
C33 7767 100N 16V 10%CAP 0603 SMT X7R C127 7813 _47P 50V 5%CAP 0805 SMT NPO R7 7625 W100 10K0 1% 0805 SMT RES R105 7625 W100 10K0 1% 0805 SMT RES R216 7624 W100 100R 1% 0805 SMT RES
C34 5979 100N 50V 5%CAP 0805 SMT X7R C128 7813 _47P 50V 5%CAP 0805 SMT NPO R8 7900 W125 30K 0.5% 0805 SMT RES R106 7854 W125 47R 5% 0805 SMT RES R217 7624 W100 100R 1% 0805 SMT RES
C35 7767 100N 16V 10%CAP 0603 SMT X7R C129 7813 _47P 50V 5%CAP 0805 SMT NPO R9 7682 W125 17K8 1% 0805 SMT RES R107 7625 W100 10K0 1% 0805 SMT RES S1 3439 DPDT MINI PC VERT MOMENTARY
C36 7969 _10U 10V 20%CAP 0805 SMT Y5V C130 7697 _22U 16V 5%CAP 5X5.5 SMT ELC R10 7708 W100 200R 1% 0805 SMT RES R108 7642 W100 4K75 1% 0805 SMT RES S2 3522 DPDT MINI PC VERT SNP ALT
C37 7767 100N 16V 10%CAP 0603 SMT X7R C131 7697 _22U 16V 5%CAP 5X5.5 SMT ELC R11 7854 W125 47R 5% 0805 SMT RES R109 7628 W100 15K0 1% 0805 SMT RES S3 3439 DPDT MINI PC VERT MOMENTARY
C50 7813 _47P 50V 5%CAP 0805 SMT NPO C132 7927 100P 50V 10%CAP 0805 SMT NPO R12 7854 W125 47R 5% 0805 SMT RES R110 7899 W125 1K800 0.1% 0805 SMT RES S4 3522 DPDT MINI PC VERT SNP ALT
C52 5979 100N 50V 5%CAP 0805 SMT X7R C133 7969 _10U 10V 20%CAP 0805 SMT Y5V R13 7854 W125 47R 5% 0805 SMT RES R111 7899 W125 1K800 0.1% 0805 SMT RES U1 6793 PROC4 BLE MODULE 14X19MM SMT
C54 7737 _10N 50V 10%CAP 0805 SMT X7R C134 7969 _10U 10V 20%CAP 0805 SMT Y5V R14 7854 W125 47R 5% 0805 SMT RES R112 7642 W100 4K75 1% 0805 SMT RES U2 8318 ADAU1401 28/56 DSP 2AD4DA SMT IC
C55 8140 _15U 35V 10%CAP 6032 SMT TNT C135 7767 100N 16V 10%CAP 0603 SMT X7R R15 7624 W100 100R 1% 0805 SMT RES R113 7642 W100 4K75 1% 0805 SMT RES U3 8173 MKL15Z64VLH4 48MHZ MCU SMT LQFP64
C56 8141 100U 10V 20%CAP 3528 SMT TNT C136 7767 100N 16V 10%CAP 0603 SMT X7R R16 7624 W100 100R 1% 0805 SMT RES R114 7708 W100 200R 1% 0805 SMT RES U4 7019 74LVC1G80 SNGL FILPFLOP SMT SOT753
C57 7819 _10U 10V 10%CAP 1206 SMT X5R C137 8141 100U 10V 20%CAP 3528 SMT TNT R17 7624 W100 100R 1% 0805 SMT RES R115 7708 W100 200R 1% 0805 SMT RES U5 7890 LM2671 3V3 REG 0A5 SMT SO8
C58 7966 __2N7 100V 10%CAP 0805 SMT X7R C138 7969 _10U 10V 20%CAP 0805 SMT Y5V R18 4963 W125 64K9 1% 0805 SMT RES R116 7708 W100 200R 1% 0805 SMT RES U6 7817 33078 DUAL OPAMP SMT SO-8
C59 5979 100N 50V 5%CAP 0805 SMT X7R C139 7767 100N 16V 10%CAP 0603 SMT X7R R19 7899 W125 1K800 0.1% 0805 SMT RES R117 7708 W100 200R 1% 0805 SMT RES U7 7817 33078 DUAL OPAMP SMT SO-8
C60 5979 100N 50V 5%CAP 0805 SMT X7R C140 7969 _10U 10V 20%CAP 0805 SMT Y5V R20 7899 W125 1K800 0.1% 0805 SMT RES R118 7642 W100 4K75 1% 0805 SMT RES U8 7817 33078 DUAL OPAMP SMT SO-8
C61 5979 100N 50V 5%CAP 0805 SMT X7R C141 5979 100N 50V 5%CAP 0805 SMT X7R R21 7854 W125 47R 5% 0805 SMT RES R119 7642 W100 4K75 1% 0805 SMT RES U9 7817 33078 DUAL OPAMP SMT SO-8
C62 7927 100P 50V 10%CAP 0805 SMT NPO C142 7809 _10U 16V 20%CAP 5X5.4 SMT NP R22 7854 W125 47R 5% 0805 SMT RES R120 7899 W125 1K800 0.1% 0805 SMT RES U10 7817 33078 DUAL OPAMP SMT SO-8
C63 7871 470P 50V 5%CAP 0603 SMT NPO C143 5979 100N 50V 5%CAP 0805 SMT X7R R23 7673 W100 475R 1% 0805 SMT RES R121 7899 W125 1K800 0.1% 0805 SMT RES U11 7817 33078 DUAL OPAMP SMT SO-8
C64 7871 470P 50V 5%CAP 0603 SMT NPO C144 5979 100N 50V 5%CAP 0805 SMT X7R R24 7673 W100 475R 1% 0805 SMT RES R122 7642 W100 4K75 1% 0805 SMT RES U12 7668 MC33079D QUAD OPAMP SMT SO14
C65 7799 __5N6 50V 5%CAP 0805 SMT C0G C147 7917 _33U 25V 20%CAP 6.3X5.5 SMT EL R25 7854 W125 47R 5% 0805 SMT RES R123 7628 W100 15K0 1% 0805 SMT RES U13 7817 33078 DUAL OPAMP SMT SO-8
C66 7809 _10U 16V 20%CAP 5X5.4 SMT NP C148 7917 _33U 25V 20%CAP 6.3X5.5 SMT EL R26 7854 W125 47R 5% 0805 SMT RES R124 4963 W125 64K9 1% 0805 SMT RES U15 7918 LM1117 REGULATOR 5V0 SMT SOT223
C67 7871 470P 50V 5%CAP 0603 SMT NPO C149 7769 __1U 50V 20%CAP 4.3X3.9 SMT ELC R27 7624 W100 100R 1% 0805 SMT RES R125 7678 W125 3K92 1% 0805 SMT RES U16 8122 PCM1796 DAC STEREO DIFF SSOP28 SMT
C68 7966 __2N7 100V 10%CAP 0805 SMT X7R C150 5979 100N 50V 5%CAP 0805 SMT X7R R45 7859 W125 2K2 5% 0805 SMT RES R126 4963 W125 64K9 1% 0805 SMT RES U17 7668 MC33079D QUAD OPAMP SMT SO14
C69 5979 100N 50V 5%CAP 0805 SMT X7R D4 7750 CDSF4148 75V 0A15 1005 SMT R47 7899 W125 1K800 0.1% 0805 SMT RES R127 7678 W125 3K92 1% 0805 SMT RES U19 8279 AK5572 STDIF 32BIT ADC SMT QFN48
C70 5979 100N 50V 5%CAP 0805 SMT X7R D6 7914 MMBZ5231B 5V1 0W35 5% SMT ZEN R48 7898 W125 1K02 0.1% 0805 SMT RES R128 7637 W125 3K32 1% 0805 SMT RES U20 7019 74LVC1G80 SNGL FILPFLOP SMT SOT753
C71 5979 100N 50V 5%CAP 0805 SMT X7R D24 7893 MBRA340T3 40V 3A SHTKY 403D SMT R49 7628 W100 15K0 1% 0805 SMT RES R129 7637 W125 3K32 1% 0805 SMT RES W6 2328 8 CIR XH-HEADER 0.098IN
C72 7966 __2N7 100V 10%CAP 0805 SMT X7R D25 7750 CDSF4148 75V 0A15 1005 SMT R50 7673 W100 475R 1% 0805 SMT RES R130 7637 W125 3K32 1% 0805 SMT RES W7 2327 6 CIR XH-HEADER 0.098IN
C73 7927 100P 50V 10%CAP 0805 SMT NPO D26 7750 CDSF4148 75V 0A15 1005 SMT R51 7928 W125 10K00 0.1% 0805 SMT RES R131 7637 W125 3K32 1% 0805 SMT RES
C74 5979 100N 50V 5%CAP 0805 SMT X7R D27 7750 CDSF4148 75V 0A15 1005 SMT R52 7866 W125 1M 5% 0805 SMT RES R132 7637 W125 3K32 1% 0805 SMT RES
C75 7969 _10U 10V 20%CAP 0805 SMT Y5V D28 8080 SMAJ150CA 150V 400W BIDIR SMT R53 7681 W125 8K25 1% 0805 SMT RES R133 7637 W125 3K32 1% 0805 SMT RES
C76 5979 100N 50V 5%CAP 0805 SMT X7R D31 7750 CDSF4148 75V 0A15 1005 SMT R54 7625 W100 10K0 1% 0805 SMT RES R134 7625 W100 10K0 1% 0805 SMT RES
C77 5979 100N 50V 5%CAP 0805 SMT X7R D32 7750 CDSF4148 75V 0A15 1005 SMT R55 7866 W125 1M 5% 0805 SMT RES R135 7625 W100 10K0 1% 0805 SMT RES
C78 7871 470P 50V 5%CAP 0603 SMT NPO D33 7832 MM3Z18VT1G 18V0 0W2 5% SMT ZEN R56 8137 W125 1K62 1% 0805 SMT RES R136 7625 W100 10K0 1% 0805 SMT RES
C79 7927 100P 50V 10%CAP 0805 SMT NPO D34 7750 CDSF4148 75V 0A15 1005 SMT R57 7899 W125 1K800 0.1% 0805 SMT RES R137 7898 W125 1K02 0.1% 0805 SMT RES
C80 8139 _22U 25V 20%CAP 1210 SMT X7R D35 8080 SMAJ150CA 150V 400W BIDIR SMT R58 7898 W125 1K02 0.1% 0805 SMT RES R138 7642 W100 4K75 1% 0805 SMT RES
C81 7813 _47P 50V 5%CAP 0805 SMT NPO D36 7750 CDSF4148 75V 0A15 1005 SMT R59 7673 W100 475R 1% 0805 SMT RES R142 7866 W125 1M 5% 0805 SMT RES
C82 7813 _47P 50V 5%CAP 0805 SMT NPO D37 7750 CDSF4148 75V 0A15 1005 SMT R60 7928 W125 10K00 0.1% 0805 SMT RES R143 7866 W125 1M 5% 0805 SMT RES
C83 8139 _22U 25V 20%CAP 1210 SMT X7R D38 7750 CDSF4148 75V 0A15 1005 SMT R61 7628 W100 15K0 1% 0805 SMT RES R147 7854 W125 47R 5% 0805 SMT RES
C84 7813 _47P 50V 5%CAP 0805 SMT NPO D39 7750 CDSF4148 75V 0A15 1005 SMT R62 7642 W100 4K75 1% 0805 SMT RES R148 7854 W125 47R 5% 0805 SMT RES
C85 7871 470P 50V 5%CAP 0603 SMT NPO D40 7750 CDSF4148 75V 0A15 1005 SMT R63 7708 W100 200R 1% 0805 SMT RES R149 7854 W125 47R 5% 0805 SMT RES
C86 7871 470P 50V 5%CAP 0603 SMT NPO D41 7750 CDSF4148 75V 0A15 1005 SMT R64 6543 48R 265V RESETTABLE THERMISTOR PTC R150 7854 W125 47R 5% 0805 SMT RES
C87 7603 680P 50V 5%CAP 0805 SMT C0G D42 7750 CDSF4148 75V 0A15 1005 SMT R65 7898 W125 1K02 0.1% 0805 SMT RES R151 7854 W125 47R 5% 0805 SMT RES
C88 7871 470P 50V 5%CAP 0603 SMT NPO D43 7750 CDSF4148 75V 0A15 1005 SMT R66 7678 W125 3K92 1% 0805 SMT RES R152 7854 W125 47R 5% 0805 SMT RES
C89 7735 __4U7 50V 10%CAP 1210 SMT CER D44 7750 CDSF4148 75V 0A15 1005 SMT R67 7928 W125 10K00 0.1% 0805 SMT RES R153 7854 W125 47R 5% 0805 SMT RES
C90 5979 100N 50V 5%CAP 0805 SMT X7R HW1 8637 ROUND PUSH BUTTON 1/4" BLK 24MM R68 7928 W125 10K00 0.1% 0805 SMT RES R154 7854 W125 47R 5% 0805 SMT RES
C91 7696 _68N 50V 5%CAP 0805 SMT X7R HW2 8637 ROUND PUSH BUTTON 1/4" BLK 24MM R69 7900 W125 30K 0.5% 0805 SMT RES R155 7854 W125 47R 5% 0805 SMT RES
C92 7871 470P 50V 5%CAP 0603 SMT NPO HW3 8637 ROUND PUSH BUTTON 1/4" BLK 24MM R70 7682 W125 17K8 1% 0805 SMT RES R156 7930 W250 22R 5% 1206 SMT RES
C93 7813 _47P 50V 5%CAP 0805 SMT NPO HW4 8637 ROUND PUSH BUTTON 1/4" BLK 24MM R71 7646 W125 681R 1% 0805 SMT RES R157 7854 W125 47R 5% 0805 SMT RES
C94 8139 _22U 25V 20%CAP 1210 SMT X7R J1 4090 1/4IN &XLR PCB MT VERT COMBO NCJ6-V R72 7822 W100 7K50 1% 0805 SMT RES R158 7854 W125 47R 5% 0805 SMT RES
M1803 Parts Reference List 12/13/2018
REF YS # Description REF YS # Description REF YS # Description
AI-ASS M1803-59 EF15P/12P/10P PS/AMP V2 R233 7642 W100 4K75 1% 0805 SMT RES
C38 7886 __4U7 25V 20%CAP 4X5.5 SMT ELC R234 7642 W100 4K75 1% 0805 SMT RES
C39 7769 __1U 50V 20%CAP 4.3X3.9 SMT ELC R235 7642 W100 4K75 1% 0805 SMT RES
C40 5910 4700U 100V 10%CAP BLK 35X40MM 4PS R236 7642 W100 4K75 1% 0805 SMT RES
C41 5670 3300U 63V 20%CAP 18X40MM CUT5MM EL R237 7642 W100 4K75 1% 0805 SMT RES
C42 5860 3300U 35V 20%CAP BLK 16X35.5MM EL R238 7642 W100 4K75 1% 0805 SMT RES
C43 5860 3300U 35V 20%CAP BLK 16X35.5MM EL R239 7642 W100 4K75 1% 0805 SMT RES
C44 5670 3300U 63V 20%CAP 18X40MM CUT5MM EL R240 7642 W100 4K75 1% 0805 SMT RES
C45 5910 4700U 100V 10%CAP BLK 35X40MM 4PS R241 4963 W125 64K9 1% 0805 SMT RES
C49 7966 __2N7 100V 10%CAP 0805 SMT X7R R242 4963 W125 64K9 1% 0805 SMT RES
C51 5933 __4U7 100DC10%CAP BLK RAD POLYE FLM R243 4963 W125 64K9 1% 0805 SMT RES
C53 7809 _10U 16V 20%CAP 5X5.4 SMT NP R244 7682 W125 17K8 1% 0805 SMT RES
C145 7769 __1U 50V 20%CAP 4.3X3.9 SMT ELC R245 7634 W100 20K5 1% 0805 SMT RES
C146 7769 __1U 50V 20%CAP 4.3X3.9 SMT ELC R246 7682 W125 17K8 1% 0805 SMT RES
C151 5982 150P 1000V 5%CAP 1206 SMT C0G R247 7634 W100 20K5 1% 0805 SMT RES
C152 5982 150P 1000V 5%CAP 1206 SMT C0G R248 7682 W125 17K8 1% 0805 SMT RES
C153 5982 150P 1000V 5%CAP 1206 SMT C0G R249 7634 W100 20K5 1% 0805 SMT RES
C154 8176 _47N 100V 10%CAP 1206 SMT X7R W2 6535 HEADER SIL (FEMALE) 26 SOCKET
D1 7750 CDSF4148 75V 0A15 1005 SMT W6_ 2328 8 CIR XH-HEADER 0.098IN
D2 7750 CDSF4148 75V 0A15 1005 SMT W7_ 2327 6 CIR XH-HEADER 0.098IN
D3 8275 MMBZ5252B 24V0 0W35 5% SMT ZEN W8 4145 9PIN 3X3 POWER PIN HEADER
D5 8186 3SMAJ5932B 20V 3W0 DO214AC SMT ZEN W12 3538 24 PIN BREAKAWAY LOCK .156
D7 7832 MM3Z18VT1G 18V0 0W2 5% SMT ZEN
D8 7750 CDSF4148 75V 0A15 1005 SMT
D9 7750 CDSF4148 75V 0A15 1005 SMT
D10 7889 ES3D 200V 3A0 D214 SMT SMC
D11 7889 ES3D 200V 3A0 D214 SMT SMC
D12 7889 ES3D 200V 3A0 D214 SMT SMC
D13 7889 ES3D 200V 3A0 D214 SMT SMC
D14 7889 ES3D 200V 3A0 D214 SMT SMC
D15 7889 ES3D 200V 3A0 D214 SMT SMC
D16 7889 ES3D 200V 3A0 D214 SMT SMC
D17 7889 ES3D 200V 3A0 D214 SMT SMC
D18 7889 ES3D 200V 3A0 D214 SMT SMC
D19 7889 ES3D 200V 3A0 D214 SMT SMC
D20 7889 ES3D 200V 3A0 D214 SMT SMC
D21 7889 ES3D 200V 3A0 D214 SMT SMC
D22 7889 ES3D 200V 3A0 D214 SMT SMC
D23 7889 ES3D 200V 3A0 D214 SMT SMC
F1 2492 FUSE LAG 0A4 250V T&R
L6 8283 __4.7UH 20% COIL 12MM SMT
L7 6562 _192UH CHOKE 74T20AWG/77256MAGNTKS
L11 2906 486UH COIL COMMON MODE 8A SMT
Q4 7837 MMBT5401 PNP SOT-23 SMT
Q5 7915 T810-600G-TR 8A TRIAC D2PAK SMT
Q6 5190 MBS4992 TO92 8V5 DIAC T&R
Q15 6817 MJD112 NPN DARL DPAK3 SMT
Q16 7838 MMBT3904 NPN SOT-23 SMT
R28 7859 W125 2K2 5% 0805 SMT RES
R29 7866 W125 1M 5% 0805 SMT RES
R30 7625 W100 10K0 1% 0805 SMT RES
R31 7895 FUSE SLOW 7A 125V SMT 6125
R34 7895 FUSE SLOW 7A 125V SMT 6125
R38 7852 W250 10R 5% 1206 SMT RES
R42 7900 W125 30K 0.5% 0805 SMT RES
R44 7852 W250 10R 5% 1206 SMT RES
R46 7930 W250 22R 5% 1206 SMT RES
R144 7682 W125 17K8 1% 0805 SMT RES
R145 7682 W125 17K8 1% 0805 SMT RES
R146 7682 W125 17K8 1% 0805 SMT RES
R204 7852 W250 10R 5% 1206 SMT RES
R205 7852 W250 10R 5% 1206 SMT RES
R206 7727 W100 4R7 5% 0805 SMT RES
R207 7628 W100 15K0 1% 0805 SMT RES
R208 7673 W100 475R 1% 0805 SMT RES
R218 7628 W100 15K0 1% 0805 SMT RES
R219 7628 W100 15K0 1% 0805 SMT RES
R220 7628 W100 15K0 1% 0805 SMT RES
R221 7628 W100 15K0 1% 0805 SMT RES
R222 7628 W100 15K0 1% 0805 SMT RES
R223 7628 W100 15K0 1% 0805 SMT RES
R224 4963 W125 64K9 1% 0805 SMT RES
R225 4963 W125 64K9 1% 0805 SMT RES
R226 4963 W125 64K9 1% 0805 SMT RES
R227 7822 W100 7K50 1% 0805 SMT RES
R228 7822 W100 7K50 1% 0805 SMT RES
R229 7822 W100 7K50 1% 0805 SMT RES
R230 7822 W100 7K50 1% 0805 SMT RES
R231 7642 W100 4K75 1% 0805 SMT RES
R232 7642 W100 4K75 1% 0805 SMT RES
M1804 Parts Reference List 12/13/2018
REF YS # Description REF YS # Description REF YS # Description
C46 5242 100N 250V 20%CAP BLK 'X2' 15MM AC
C47 5266 680N 250V 20%CAP BLK 'X2' 27MM AC
C48 6451 __4N7 250V 20%CAP BLK 'Y' 10MM AC
L5 6492 1300UH COIL COMMON MODE 4AMP
W9 4147 6 PIN POWER PIN HEADER MALE POLZED
W10 4147 6 PIN POWER PIN HEADER MALE POLZED
W11 4162 2 PIN POWER PIN HEADER MALE POLZED
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

A A

HI- HI-
26 W2:1
R144
+HiV_S_ 6 6 +HiV_S +88V
6 W7:6 W7_:6 6 W125 HI+ HI+
26 W2:2
R145 120K0
B
HORN+_S_ 4 4 HORN+_S 0805
B
6 W7:4 W7_:4 6 W125 MUTE MUTE
26 W2:3
120K0 R146
WOOFER+_S_ 5 5 WOOFER+_S 0805
6 W7:5 W7_:5 6 W125 -15v_ -15V
26 W2:4
120K0
0805
-88V -80V_H
26 W2:5
DSP Output
DSP.SCHDOC Output.SchDoc +24v +24V
26 W2:6
D1
C130 C131 DO-214AC -24V -24V
ES1H 26 W2:7

+88V~
WOOFER+~
HORN+~
22U 16V 22U 16V
C Preamp A/D Elec Elec LVGND_ LVGND C
26 W2:8
Preamp.SchDoc ADC.SchDoc DGND D2
DAC_DATA DAC_DATA DO-214AC -44V -44V
26 W2:9
AIN_HI_SENS+ AIN_HI_SENS+ ES1H
DAC_BCLK DAC_BCLK 2 2 +15V_
AIN_HI_SENS- AIN_HI_SENS- +15V 8 W6:2 W6_:2 8 +15V_ +15V
DAC_LRCLK DAC_LRCLK 1 1 -15v_ 26 W2:10
AD_Ref AD_Ref -15v 8 W6:1 W6_:1 8
AIN_LO_SENS+ AIN_LO_SENS+ HORN_PRE_OUT 7 7 HI+ LO+ LO+
HORN_PRE_OUT 8 W6:7 W6_:7 8 26 W2:11
AIN_LO_SENS- AIN_LO_SENS- HORN_PRE_GND 8 8 HI-
ADOUT ADOUT HORN_PRE_GND 8 W6:8 W6_:8 8
GND AD_GND LO- LO-
26 W2:12
Cannot open file E:\My WOOFER_PRE_GND6 6 LO-
D
WOOFER_PRE_GND 8 W6:6 W6_:6 8
D
Documents\AD\M1496\A-D.jpg WOOFER_PRE_OUT5 5 LO+ 96KHZ 96KHZ
WOOFER_PRE_OUT 8 W6:5 W6_:5 8 26 W2:13
Ph+24v
-80V
26 W2:14

Power Supply / Speaker Out HIOUT


26 W2:15
POWER SUPPLY.SCHDOC MUTE

/RESET_DSP

RESET_DAC
MUTE
-88V -80V

+88VSense

SPI_MOSI

SPI_MOSI
SPI_MISO

SPI_MISO
26 W2:16

SPI_CLK

SPI_CLK
SS_DAC
LimitSig

SS_DSP
MCLK

MCLK
HORN+ HIOUT HIOUT
26 W2:17
WOOFER+
LRCLK

E LimitSig
MCLK

WGND WGND E
BCLK
Mode_Switch

26 W2:18
Reset
Switch_Gnd
Sub_Switch
BT_Switch
CH_Gnd

LOOUT
Mode_G
Mode_B

Mode_R

26 W2:19
LimitIn
ClipIn

HORN_PRE_GND_ LOOUT
Woofer_PRE_GND_ 26 W2:20

4 4 LVGND_ +44V +44V


8 W6:4 W6_:4 8 LVGND_ 26 W2:21
-24V
-24V
-44V LOOUT LOOUT
-44V 26 W2:22
3 3 D_GND_ -88V
F
6 W7:3 W7_:3 6 D_GND_ -88V F
+44V +24V +24V_
+44V 26 W2:23
+24v
+24vIN 1 1 +24v_ +24V +80V
6 W7:1 W7_:1 6 +24v_ 26 W2:24
+88V
+88V
Ph+24v 3 3 +88V +80V_H
8 W6:3 W6_:3 8 PhantomPower 26 W2:25
Microcontroller
+80V
Microcontroller.SchDoc HORN_OUT 26 W2:26
HORN_GND

CH_GND_
ClipIn
LimitIn

SPI_MISO
SPI_CLK

+24vIN

MCLK
+88VSense

RESET_DSP
SPI_MOSI

SS_DSP

SS_DAC
RESET_DAC
WOOFER_OUT
R64 WOOFER_GND
265V

G 6543 G
48R
HC3
1 Switch_Gnd
Sub_Switch
CON_HOLE_125 BT_Switch
Mode_Switch
WOOF_CLK WOOF_CLK 2
6 W7:2 W7_:2 6
2 WOOF_CLK_
Mode_R
Input PCB Power Supply PCB
Mode_G
8 HORN_PRE_GND 8
Mode_B BLE
H 3966 7 HORN_PRE_OUT 7 H
16AWG
GRN /RESET_BLE /BLE_RESET 3966 6 WOOFER_PRE_GND 6
LimitLED

BT_UART_RX BLE_UART_RX 5 WOOFER_PRE_OUT 5


ClipLED

16AWG
CON_HOLE_128
W4_ BT_UART_TX BLE_UART_TX 4 DGND 4
BT_G
BT_B

BT_R

GRN
. WIRE
PREFUSED 1 3 Ph+24v 3
D_GND W4 2 2
. WIRE
PREFUSED +15V
CHGND2 HC2 1 -15V 1
BLE.SchDoc
Connected to CHGND1 through the chassis.
Use a wire to connect these two _W6 3036 Cable _W6_
points when working on the bench. CHGND1
R63
W100

I 200R
Connected to CHGND2 through the chassis.
Input PCB 3044 Cable Power Supply PCB I
0805 Use a wire to connect these two
6 +HiV_S 6
R10 points when working on the bench.
W100

200R 5 WOOFER+_S 5
DNS 0805 4 HORN+_S 4
LD4 3 D_GND_ 3
2 2 DGND
4 W13_:2 W13:2 4 RED 2 WOOF_CLK 2
3 3
4 W13_:3 W13:3 4 Clip 1 +24vIN 1
4 4 LD1 8154
4 W13_:4 W13:4 4
YEL _W7 _W7_
Limit
8155
J J
R167 R166 R165 R164 R163 R162
W125

W125

W125

W125

W125

W125

1K50 1K50 1K50 1K50 1K50 1K50 LP1


0805 0805 0805 0805 0805 0805 2392
RA Light Pipe DGND
LD3 +15V_5
R Status ECO.SchDoc
R174
G 1 1 ECAD INCIDENTAL
4 W13_:1 W13:1 4 W125
B 47R
0805
Assembly.SchDoc
ASSEMBLY NOTES
Yorkville Sound Ltd. Product(s): EF10P-EF12P-EF15P
BT_State 550 Granite Court Description: PS and Input
K RGB History.SchDoc Pickering, ON K
6001
0606LED DESIGN HISTORY Canada L1W 3Y8 PCB#: M1497 Rev#: V01 EML Rev#: 01 Sheet 1 Of 11
www.yorkville.com Modified: 2019-10-09 File: Top Sheet.SchDoc Tmp Rev: V031
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

R175

A
PreAmp CLIP
CDSF4148

D25
D1005

470P
0603
50V
W125
1K02
0805
A
U17:2 +15V +15V
C5 R199 R148
+15V_1
J1:2 MC33079D W125 W125
MAIN INPUT
R C58 6 - 47R 47R
7668 U17:5 U6:3 U7:3
R MIX+ U6:2 R176 R177 0805 0805
C59 R53 7

W125
MC33078 MC33078

50V
T T
MAIN INPUT
XLR-PHONE
MC33078 2N7 100V 8K25
W125 W100 AIN_HI_SENS+ 4 MC33079D 8 8
7817 7817

50V
6 7817 1K50 100R

50V
0805
- 0805 5 R178 7668

W125
S S 100N 50V SO14 C74
R47 R48 + 0805
1K50
0805 V+ V+ V+

100N

50V
0805
NCJ6FAV-0
0805
D26 7 0805
C141 C61
C143 W125 W125

100N
D1005 0805

100N
4090 R54 R50 R51 0805

W100
5 1K800 1K02 V- SO14 V- C60 V-
10K0 + SO8 SO8

100N
W100 W125 SO8 0805 0805 0805
B 0805 100N 50V B
10K00 CDSF4148 4 4

50V
0805 475R0 U7:1 0603
11
0805 0805 470P 50V
R52 MC33078 R192
C63 U17:1

W125

W125
R142 C64 R200 R149

W125
2 7817 -15V_1
J1:1 1M - C66 1K50

470P
MAIN INPUT
1M 0805
0603
MC33079D 0805 W125 W125
X2 0805 R214 2
XLR-PHONE 1 W125 - 7668 47R 47R IGND
X3 TP7 10U 16V R179 R180 -15V 0805 BusGND -15V 0805
+1/4 TP8 562R0 1
3 AIN_HI_SENS-

50V
W125 W100
X1 TP9 + SO8
5X5.5mm 0805
1K50 100R
U6:1 3 SO14
C65 + 0805 0805
SH

C69 MC33078

5N6
0805

50V
NCJ6FAV-0 R55 2 +15V

W125
R202 - 7817 R150

W125
4090
1M 1M R57 R58 R181 +15V_2
0805
0805 C67 100N 080550V D27 1 BusGND W125
W125

470P
C C144 0603
D1005 W125 W125 47R C
D28 R59 R60 1K800 1K02 3K92 0805 U11:3 U9:3
3 0805
W100 W125 + SO8 0805 0805
C68 R56 0603
8 MC33078 MC33078

W125
DO-214ACBI 100N 50V 470P 50V
8
475R0 10K00 CDSF4148 1K62 7817 7817

50V

50V
0805
SMAJ150CA 0805 0805
2N7 100V
0805
C78 U17:3 V+ V+
SG1
0805
MC33079D C70 C71
9 -

100N

100N
0805 0805
7668 V- V-
SG2
R182 R183 SO8 SO8
MIX- 8
THRU

W125 W100 AIN_LO_SENS+ 4 4


Male XLR 10 1K50 R185 100R

W125
SO14 0805 0805
J2 + 1K50
0805
R151
-15V_2
W125
D 47R D
C22 -15V 0805 MicGND2
47P 50V LIMIT INDICATOR 470P
0603
50V R193

W125
4140 .
R143 0805 C100 U17:4 1K50
W125
NetC22_1 0805 +15V
13 - MC33079D R152
1M U7:2 7668 +15V_3
C21

CH_Gnd W125
0805 R187 R188
R49 MC33078 14 47R U10:3
Connection to CHGND2 in 6 W125 W100 AIN_LO_SENS- 0805 U8:3
LimitSig W100 - 7817 1K50 100R
Power Supply through the chassis. 10V 10U D4 12 SO14 8 MC33078 8 MC33078
TP10 15K0 7 +3V3_UC + 0805 0805
7817 7817

50V

50V
1206
Use a wire to connect these two 0805 R195 R197 R7
points when working on the bench. D1005 W125 W125 W100 V+ V+
5 R8 C76 C77
E + E

W125
SO8 CDSF4148 10R0 30K0 10K0 AD_Ref
CLIP INDICATOR

100N

100N
30K0 0805 0805 0805 0805
Q3 0805
CON_HOLE_125

HC4 0805 R198 V- V-


SO8 SO8
MMBTA14LTIG LimitIn W125 GND
HC6

SOT-23
1 Spacer1 7701
4 4
R61 10R0

W100
Q7 0805

10V
15K0 R153
1

CON_HOLE_125 CON_HOLE_125 R196 -15V_3


DGND
0805 CLIP W125 SOT-23 MMBTA14LTIG ClipIn W125
Spacer2 C25
Spacer3

1 47R
30K0 7701

10U
0805
0805 -15V 0805
IGND
J3:2 LEDGND_

10V
HC5 R62

W100
R 4K75
R
T
R67 R65 R68 0805 C75
T

10U
LINE IN
F XLR-PHONE W125 W125 W125 0805
F
SG3
S S 10K00 1K02 10K00
0805 0805 0805 D31 +15V
CLIP
50V

NCJ6FAV-0
C81
4090 SG4 50V 47P D1005 +15V_5
C82
CDSF4148
47P

J3:1 0805
0805 U8:1
LINE IN X2 MC33078 R70 D33 Q8
XLR-PHONE
2 7817 W125 SOT-23 MMBT5401
+1/4
X3 TP11 - C80 17K8 SOD-323
50V

X1 TP12 1 0805
18V0
22U 25V 7837
C84 3 D34 R
Mode_R
SH

1210
+ R157
47P

0805 SO8
LINE IN

NCJ6FAV-0 G
G TP13 Mode_G W125 +15V G
4090 D1005 B 47R
R74 R73 R75 CDSF4148 Mode_B 0805
SMAJ150CA R76

W125
W125 W125 W125

LD2
Mode
D35 10K00 1K02 10K00 K1:2 1K02
DO-214ACBI
0805 0805 0805
LINE 3696
0805 RGB
6001
0606LED
IGND R138
R78 R79 5
SG5
W100 + SO8
W125 W125 4K75
10K00 10K00 U10:1 R69 0805
7
-15V Mode
W125

U10:2 0805 0805 30K0 P2:1 6 R80 RELAY 1C


NC NC
R81 MC33078

UP
MC33078 B LIN -

MOMENTARY
0805
7817 D32 W100

NetC83_1
H 6 2 7817 10K CLIP H
W100
- 7817 - 10K0 COM COM

3439
2K74 D36 LINE MC33078

DOWN
J4 D1005 1 0805
0805 7 4459 U8:2 D1005
3466 CDSF4148
R

CDSF4148 U11:1 NO NO
LINE IN 3 C83 C142
5 + MC33078 Mode_Switch
Ph+24v
RCA DUAL
VERT + SO8 SO8 R71 R72 R77
2 7817 Sub_Switch
-

S1:1

S1:2
GOLD 24MM W125 W100 W100
P2:2 22U 25V 10U 16V R82 R83 BT_Switch
50V

PCB MT R87 R88 681R 7K50 10K0 1


R86 LineGND1 1210 5X5.5mm
MIX+
W100

0805 0805 0805 W125 W125


W125 W125 Sub
L

10K0 C85 R91

W100
R215 R216 C86 330R0 1K02
W100

W100

R89 0805 10K00 10K00 10K0 3 S4:1


+
470P

100R 100R 0603 50V 470P SO8 0805 0805


0805 0805

UP
0805
0805 0805 W100

3522
Sub
UP DOWN
2K74 0603

DOWN
0805 3522 MixerEnable
I R90 Connected to Main I

W100
R209 R217 10K0 UP DOWN Input at top left.
W100

W100

SG6
100R 100R 0805
LineGND2

S2:1

S2:2
0805 0805
C87 R85 R84 S4:2 MIX-
W125 W125
680P 50V 330R0 1K02 3522
SG7 C147 0805
D37 D38 0805 0805
R92 R93 R94 NC NC
R210 25V 33U CLIP CLIP
W250

W100 W100 W100 UP UP


619R0 3439
1206 475R0 475R0 2K74 D1005 D1005
R95
MIXER ENABLE COM COM
MIC IN

6x6mm
50V

0805 0805 0805 CDSF4148 CDSF4148 W100 BusGND 2PDT MINI


R211 U9:1 DOWN DOWN
R160 C88 10K0 MOMENTARY
W100

W250 J5 MC33078
MIC NO NO
470P

J 619R0 DNS 0603 0805


J
2 7817
1206
0805
- C89 C90 C91 S3:1 S3:2

RELAY 1C
R96
1 5 5
W125 + SO8 + SO8

3696
R212 4U7 50V 100N 50V 68N 50V
W250 3 1210 1K02 7 0805 805 7
+

K1:1
Switch_Gnd
50V

MIC IN SO8 0805 P3:1


619R0 R97
W125

B LIN R98
W125

1206 XLR FEML


30K0 10K
6 6
4010 C92 0805
MIC
- 7817 64K9 - 7817
470P

0603 0805
P3:2 MC33078 MC33078
50V

SG8 C148 4459 C93


R213 R99 R100 R101 U9:2 U11:2
W250

C149
4.3X3.9 619R0
1206 IGND
25V 33U
W100 W100 W100
C94
50V 47P Section: PreAmp
1U

475R0 475R0 2K74 C95 R102 R103


K
6x6mm
0805 0805 0805
W125
0805
W100
Product(s): EF10P-EF12P-EF15P K
22U 25V
680P 50V 1K02 1210
20K5 PCB#: M1497 Rev#: V01 EML Rev#: 01 Sheet 2 Of 11
0805 0805
0805 MicGND2
Modified: 2019-10-09 File: Preamp.SchDoc Tmp Rev: V031
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

A A

R184
AD_Ref W100

10U
16V
0805
4K75

16V
R186

W100
0805
4K75 C134

10U
16V

10V
B 0805
C98 0805
B

10U

100U
C99

100N
0603

16V
C135 C133

10V
0805

100N
0603
C137 C136

100N
AIN_HI_SENS+

10V
3528 0603
AIN_HI_SENS+
100P

+5Vref
U19

17

45

19

18
3
2
C C
50V

C62
0805

R189

100V

W250

TVDD

LDOE

DVSS
VREFH1
VREFL1

VDD18
Voltage
0805
22R
1206
Reference
100P

2N7 C72
50V

C73 47 Serial Output


0805

AIN1P Delta-Sigma Decimation L12


D AIN_HI_SENS- 48 HPF 37 D
AIN_HI_SENS- AIN1N Modulator Filter DIF0 600R +3V3
38
AIN_LO_SENS+ DIF1 F0805
AIN_LO_SENS+ 25 BCLK
100P

BICK BCLK
5 AIN2P Delta-Sigma Decimation LRCK 26 LRCLK
LRCLK
AIN_LO_SENS- 4 HPF 27
100V

AIN2N Modulator Filter TDMIN R158


0805

ADOUT_
50V

C79 28
0805

SDTO1 W125 ADOUT


E DP 43 47R E
2N7

C101 39 0805
TDM0
100P

40
AK5572 TDM1
ODP 46
41
8279 PSN
50V

C132
0805

AIN_LO_SENS- QFN48
F F
31
6 CKS0
+5V AVDD 32
AD_GND 7 CKS1
10V

16V

AVSS 33
CKS2
C138 C139 34
CKS3
10U

100N

0805 0603

G G
Controller
DGND

TESTO1
SLOW

Therm
MCLK

HPFE
TEST

MSN
PW2
PW1
PW0
PDN

OVF

I2C
SD
H H
20

16

15

35
36

23
22
21

24

30

44

42

49
29
+3V3_AD
MCLK
Reset

I DGND I
MCLK
Reset

J J

Section: A/D Converter


Product(s): EF10P-EF12P-EF15P
PCB#: M1497 Rev#: V01 EML Rev#: 01 Sheet 3 Of 11
K K
Modified: 2019-10-09 File: ADC.SchDoc Tmp Rev: V031
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

A A

+3V3
L2
600R
F0805

B +3V3_DSP B
+3V3_DSP
MCLK

16V

10V
16V

16V

16V

10V
16V

16V

10V
Q1 DGND C6 C7

100N

10U
0603 0805 R2

W100
C12 C13 C14 MMBT5401 +1V8 SUPPLY C8 C9 C10 C11
475R0

100N

100N

100N

10U
0603 0603 0603 0805
100N

100N

10U
0603 0603 0805 SOT-23 0805
7837 +3V3_DSP

NetQ1_1
C C
+3V3_DSP DGND

16V

25V
R3 +3V3
W125
1K02 C15 C16 OSCILLATOR L3
DGND

100N

3N3
0603 0805
0805 600R
Q2

34

VDRIVE 17
13
DVDD 24

DGND 12
DGND 25

IOVDD 18
AVDD 48
36

AGND 37
AGND 42
39
38
33
35

31
32
DGND F0805

Vdd 4
AGND 1
DVDD

AVDD
R5

MCLKI
OSCO

50V
CLK 3 OUT
D OSC W100 D

PLL_LF
MODE1
MODE0
PGND
PVDD 40
U2 1.8V Reg CM 100R 7894 C17

220N
PLL 41 0805 1 1206
FILTD E/D

2 GND
46

10V

16V

10V
VOUT0 LimitSig 12.288
2 ADC1 VOUT1 45
4 7905 ADAU1701 C18 C19 C20
ADC0

10U

100N

10U
LQFP 0805 0603 0805
28/56-BIT, 50 MHz VOUT2 44
E
AUDIO PROCESSOR CORE
VOUT3 43 E
40 ms DELAY MEMORY DGND
3 DGND
ADC_RES
47

ADDR1 /CDATA/WB
FILTA Control
8-CH 8-Bit 8-CH
10U

16V
Interface
Digital Aux GPIO Digital
Reset/ and
Input ADC Output
R9 Mode Selfboot
W125

C23 C24 Select


17K8
100N
10V

0805 0603
0805
F Input/Output Matrix F

CLATCH/WP
30
5 RESETB

MP10
SELFBOOT

MP11
SDA/COUT
SCL/CCLK
RSVD

ADDR0

MP1
MP0
MP4
MP5

MP9
MP2
MP3
MP8

MP6
MP7
+3V3_DSP
HORN+~ +3V3_DSP
DGND R126 WOOFER+~

W125
17K8 D43
6

7
20
21
22
23

10
11
8
9

26
29
28
27

15
14
16
19
R124

W125
0805 D1005
17K8 D41
CDSF4148 0805 D1005
/RESET_DSP CDSF4148
/RESET_DSP

50V
G R127 G

W100

50V
2K74 C129 D44 R125

W100
47P
0805 0805 D1005 2K74 C128
R11
D42
CDSF4148

47P
0805 0805 D1005
R12
W125

47R
W125 DAC_LRCLK CDSF4148
DGND 0805 47R
0805
SPI_MOSI R13
SS_DSP ADOUT W125 DAC_BCLK DGND
SPI_MISO DGND
H SPI_MISO 47R H
SPI_CLK 0805
SPI_CLK
R14 +3V3_DSP
W125 DAC_DATA +88V~
47R R18

W125
0805 17K8 D39
DNS 0805 D1005
CDSF4148

50V
I 6 1 I
10 W3:6 W3:1 10 R66

W100
+88VSense 2K74 C127 D40

47P
7 2 0805 0805 D1005
10 W3:7 W3:2 10
CDSF4148
8 3
10 W3:8 W3:3 10

9 4 DGND
10 W3:9 W3:4 10
Input PCB Power Supply PCB
J J
6 +HiV_S 6 10 5
10 W3:10 10
5 WOOFER+_S 5 W3:5
4 HORN+_S 4
3 D_GND_ 3 USBi header
2 WOOF_CLK 2
DGND Section: ADC/DSP
1 +24vIN 1 Product(s): EF10P-EF12P-EF15P
K _W7 _W7_ PCB#: M1497 Rev#: V01 EML Rev#: 01 Sheet 4 Of 11 K
Modified: 2019-10-09 File: DSP.SCHDOC Tmp Rev: V031
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

+3V3_uC +3V3
A VREFH R194 A
W250 600R
Mode_B

10V

10V
1R0 F0805
L4

10V

16V

10V

16V

16V
P1:1 1206
M Mode_G
BLIN C140 C27 C29 C28 C30 C26 C31

T
Mode_R

10U

10U
0805 0805

10U

100N

10U

100N

100N
50K 0805 0603 0805 0603 0603
R137

16V
4462 R128 R129 R130 R131 R132 R133

W125

W125

W125

W125

W125

W125
W125
3K32 3K32 3K32 3K32 3K32 3K32

16V
C32 MASTER 1K02 0805 0805 0805 0805 0805 0805
NetQ10_3

100N
B 0603 0805
B

B
C33 DGND U3 D Q9

100N
0603 LQFP64 D Q10 D Q11
MKL15Z64VLH4 2N7002 2N7002

MASTER
2N7002

30
48
G
8173

3
R17 7986 G
7986 G

W100
P1:2 R15 7986

W100
SOT-23
VREFL 100R S . SOT-23 R16

W100
100R S . S SOT-23
.
0805
100R

VDD
VDD
VDD
0805

DGND 1 PTE0 R134 R135 0805


R136
2 W100 W100 W100
C ClipIn PTE1 C
64 LimitLED 10K0 10K0 10K0
DNS ClipIn PTD7 LimitLED Switch_Gnd

BT_G
0805 0805
LimitIn

BT_R
0805
+15V LimitIn PTD6 63 ClipLED
ClipLED
5 PTE16 PTD5 62
6 PTE17 PTD4 61 DGND
R19 R20 BT_B 2N7002
W125

W125

1K800 1K800 Q14 7986 7


PTE18 PTD3
60
D Q12
0805 0805
D 2N7002 Q13
D 2N7002 PTD2 59
BT_Switch

SOT-23
SOT-23
7986 8 58

SOT-23
7986 G G PTE19 PTD1 Mode_Switch
D G R168 9 57 D

W100
R169 PTE20 PTD0

W100
R170 . S 100R Sub_Switch

W100
50V

. S . S 100R 0805 N3 10 PTE21


100R 0805
D6 11 56

DNS
0805
R171 R172 R173 PTE22 PTC11

DNS
C34 5V1 N4 12 55

DNS
100N

0805 W100 W100 W100 PTE23 PTC10


SOT-23
10K0 10K0 10K0 20 PTE24 PTC9 54 SPI_MISO
0805 0805 0805 RESET_DAC R21
DNS DNS DNS 21 53
PTE25 PTC8 RESET_DSP W125 SPI_MOSI
17 PTE29 PTC7 52
47R R22
E DGND 18 PTE30 PTC6 51 0805 E
W125 SPI_CLK
N5 19 50
5

U20 PTE31 PTC5 47R


5

VCC PTC4 49 0805


1 VCC
SS_DSP
23 46
4 U4 D 1 DGND
PTA1 PTC3 SS_DAC
Q 2 4 D 24 45
CP Q R23 PTA2 PTC2
2 26 PTA4 PTC1 44
GND CP W100
27 43
SOT753
GND
384kHz 475R0 R24 PTA5 PTC0
3

F 7019 LVC1G80
0805 28 PTA12 F
3

SOT753 W100
7019 475R0 29 PTA13 PTB19 42
LVC1G80 R25 R26
0805 32 41
1 MCLK W125 PTA18 PTB18 W125 BT_UART_RX
+3V3 10 W4:1 47R 33 PTA19 PTB17 40 47R
4
W125

10 W4:4 0805 39 0805


R147

47R PTB16 BT_UART_TX


0805 22 38
W5
W5_ SWD_CLK/PTA0 PTB3 /RESET_BLE
25 SWD_DIO/PTA3 PTB2 37
1 R27 36 +88VSense
VCC +3V3_uC PTB1
G 2 2 VREFH W100
35 N6 G
DIO 10 W4:2
100R PTB0
RST 3 0805 14 N1 N2 Connect N1 & N2 for I2C when using USBi
4 +3V3_uC VREFH

VDDA
VSSA
96kHz CLK X1 15
VREFL RESET_b
34

VSS
VSS
VSS
16V
GND 5
6 3
WOOF_CLK SWO 10 W4:3 C35
SWO 100N 0603 DGND
5 +3V3_uC

4
31
47

16

13
10 W4:5
MicroPgm
6 10 W4:6
H H

16V

10V
X2 7
10 VREFL 10 W4:7
10 W4:10 C37
DGND 8 C36

100N
0603

10U
10 W4:8 0805

9 10 W4:9

I R45 I
50V 47P
W125
2K2 C50
0805 DGND
0805
L8
DGND
SS 2

SYNC 3
6 GND FB 4

C54 +3V3
L9 2.2UH
CB 1
5 ON/OFF

R156 7730
7 10N 50V
J +24vIN W250 VIN J
VSW 8
0805
22R
120uH
35V

10V

1206
SO8 U5
10V

C55 2910 C56


1206

6032 LM2671 3528


D24
15U

100U

7890 403D Section: Microcontroller


10U

MBRA340T3 C57
Product(s): EF10P-EF12P-EF15P
K PCB#: M1497 Rev#: V01 EML Rev#: 01 Sheet 5 Of 11 K
DGND Modified: 2019-10-09 File: Microcontroller.SchDoc Tmp Rev: V031
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
1 2 3 4 5 6 7 8 9 10 11

A A

Low Energy Bluetooth


B B

W1 W1_ U1
VCC
1 +3V3_BLE 21
P0.4 P3.2
8
DIO
2 P0.6 24
P0.6 P3.3
7
C 3 23 14X19mm SMT Module 6 C
RST P0.7 CYBLE-012011-00 P3.4
CLK
4 P0.7 22
P0.5 P3.5
5
6793
5 4
GND P3.6
6 20 3
SWO 6 P1.0 P3.7
SWO P1.4 19 2
BT_Pgm
BLE_UART_RX P1.4 P4.0
P1.5 18 30
R1 P1.5 P5.0
17 31
BLE_UART_TX W125 P1.6 P5.1
D 47R 16 14 D
P1.7 P2.0
0805 13
P2.2
1 12
/BLE_RESET XRES P2.3
11
P2.4
XRES 9

VDDR
VREF
P2.6

GND
GND
GND
GND
VDD
E E

28
27
26
25
15
29
10
L1
+3V3
+3V3_BLE 600R
F0805

F F
C4 C3
C2 C1

0603

1206
100N 25V

0603

1206
16V 1U 100N 25V
16V 1U
D_GND

G G

Section: Low Energy Bluetooth


Product(s): EF10P-EF12P-EF15P
H PCB#: M1497 Rev#: V01 EML Rev#: 01 Sheet 6 Of 11 H
Modified: 2019-10-09 File: BLE.SchDoc Tmp Rev: V031
1 2 3 4 5 6 7 8 9 10 11
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

A A

Input PCB Power Supply PCB


8 HORN_PRE_GND 8
7 HORN_PRE_OUT 7
6 WOOFER_PRE_GND 6
5 WOOFER_PRE_OUT 5
B 4 DGND 4 B
3
2
Ph+24v
+15V
3
2
HORN OUTPUT
1 -15V 1
C113
20k rolloff
_W6 _W6_
1N5 50V R108
0805 W100
R110
C 4K75 C
W125 0805
1K800 C115
0805
U12:2
+15V_5 U15 MC33079D 680P 50V
+5V IOUTL+ 6 - 0805
7668 C117
REF

R112 U13:1
IN OUT 7 R114
W100 MC33078
100N 50V
50V

7918 5 4K75 W100


2
SO14 0805
- 7817

16V

10V

50V
0805 200R0
D LM1117-5v + D
C102 0805
SOT-223 1
100N

0805
C103 C104 C119 HORN_PRE_OUT

100N

10U

4N7
0603 1206 0805
R116 3
C121 C122
+ SO8

10V
W100
R118
200R0 C125
W100
DGND C105 1N5 50V 100N 50V 0805
4K75
10U
1206 0805 0805
0805
DGND R120 680P 50V
E +5V W125
0805 E
DAC_LRCLK 1K800 R122
VCOML 22

VCOMR 21

VCC1 23
DAC_BCLK 0805
U12:1 W100 HORN_PRE_GND

16V

10V
4K75
DAC_DATA MC33079D 0805
4 IOUTL- 2
R104 LRCK C106 C107 - 7668

100N

10U
W125
6 BCK VCC2L 28
0603 1206
1
10K R105 5 DATA AGND3L 27
0805 W125 3 SO14
F
10K
+ F
0805
14 RST IOUTL- 26
IOUTL-
RESET_DAC U16 25 IOUTL+ DGND
R106 IOUTL+
DGND SPI_MISO
47R
W125
13
11
MDO
MDI
8122
PCM1796
WOOFER OUTPUT
SSOP-28
0805 12
MC IOUTR-
18 IOUTR-
SPI_MOSI
10 MS IOUTR+ 17
IOUTR+ C114
SPI_CLK
G SS_DAC
3 MSEL
AGND3R 16
15N 50V
Gain? G
16V

10V
0805
R109
VCC2R 15 C108 C109 DGND R111 W100
15K0
100N

10U
0603 1206 W125
DGND 1 ZEROL 1K800
0805
AGND2
19 AGND1

C116
8 DGND

2 ZEROR 0805
U12:3
20 IREF
9 VDD
7 SCK

+5V MC33079D 680P 50V


IOUTR+ 9 - 7668 C118 0805
H R113 H
24

8 W100 U13:2
10U 16V R115
MCLK +3V3_uC 4K75 MC33078
L10 10 SO14 0805 W100
6
+3V3_DAC + 0805
- 7817

50V
200R0
50V

600R 0805
7
16V

10V

F0805
C120 WOOFER_PRE_OUT
C110

4N7
R107 0805
W125

5
15P

0603 C111 10K C112 R117 + SO8


100N

10U

0603 1206
0805
C123 C124 W100
R119 200R0
I I
W100 0805
C126
15N 50V 10U 16V
0805 0805 4K75
+15V 0805
680P 50V
R154 DGND R121
W125
+15V_4 W125
0805
R123
50V

47R U12:5 1K800


U13:3 0805 0805
U12:4
W100 WOOFER_PRE_GND
15K0
8 MC33078 C52 4 MC33079D MC33079D 0805
100N

0805
7817 IOUTR-
50V

7668 13 -
50V

J V+ V+ 7668 J
C150 C97 14
100N

0805
V-
100N

0805
V- SO14
50V

SO8 12 SO14

4 11 +
C96 Section: DAC Output
100N

0805
R155 DGND
W125
-15V_4 DGND Product(s): EF10P-EF12P-EF15P
K 47R PCB#: M1497 Rev#: V01 EML Rev#: 01 Sheet 7 Of 11 K
-15V 0805

Modified: 2019-10-09 File: Output.SchDoc Tmp Rev: V031


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

CH1341U CH1341U

ORN
A A

FEMALE CONNECTOR BLK MUTE ON/OFF


R28 R29 Q4

PIN 1
VIEWED FROM WIRE SIDE BLK/YEL VIO_ W125 W125
FEMALE CONNECTOR
SOT-23 MMBT5401
2K2 1M

PIN 1
VIEWED FROM WIRE SIDE 7837

4U7
0805 0805

1U
R30

W100
GRY_ D7 C38 -20V UNMUTE
BLACK D8 C39 10K0

25V
MALE 9 PIN CONNECTOR FOR Elec

50V
18V0 4.3X3.9 0805
TRANSFORMER SECONDARYS SOD-323
CDSF4148
RED_ D1005 MuteGND MUTE
B D9 B
BROWN BLU CH1342U

YEL W8:1 9
1 VIO/ CDSF4148
D1005
BRN D10
+88V
+88V

NC

NC
ORANGE BLK/YEL R46 S3D
RED
W8:7 9
7 GREY/ W250 +24v_ DO-214AB
ClassName: AC 22R D11

BLUE
GRY NA CE 7895
1206

S3D
+44V
+44V
C40
R31 D12 4700U
C 3 RED/ +24V DO-214AB
D13 35X40MM
C
+24V

18X40MM
W8:3 9 100V
VIO 7A S3D
DO-214AB C41 S3D
1 1 D14
WHITE 6 W10:1 6 W9:1 D15 3300U
DO-214AB

2 YELLOW C43 63V


W8:2 9 3300U S3D
18X35MM
S3D DO-214AB
DO-214AB 35V
WHT 2
2 6 W9:2
6 W10:2 5
W8:5 9 7895
R34 D16 D17
D RED C42 PS_GND D
LINE 3 7A 3300U C44
LINE 3 6 W9:3 S3D 18X35MM S3D
W11:1 2
1 AC-BLK1 LINE 6 W10:3
W8:6 9
6 GREY DO-214AB
35V DO-214AB
3300U

18X40MM
NA T3A15 (#2475) D18 63V
CE T1A6 (#2473) Power Switch L5 -24V
D19 C45
IEC_RECT+FUSE

2 1 4 S3D 4700U
C46 C47 4 6 W9:4 DO-214AB D20
6 W10:4 4 VIO 35X40MM
100N 680N W8:4 9 -44V S3D 100V
4 3 250V 250V
1300UH S3D DO-214AB
S? 'X2' 18MM X2 27MM DO-214AB
2 AC-WHT1 6492 NEUTRAL NEUTRAL 5
E
W11:2 2 NEUTRAL5 6 W10:5
6 W9:5
E
W8:8 9
8

C48 D21
4N7 -88V
6 6 -88V
250V 6 W10:6 6 W9:6
HC1 'Y' 10MM 9 S3D
W8:9 9 DO-214AB
1
ALL DIODES S3D 200V 3A0 DIO D214 SMT
CH_GND
CON_HOLE_128
PUT PADS UNDER HIGH CURRENT AND ALTERNATE
6 W9:7
6 W10:7
F CHGND F
L6 4.7UH

HORN_OUT HORN+
HORN_OUT HORN+
8283 12.3X6

100V
C49

2N7
0805

G Q15 G
R204 R205 MJD112 R206 R38

W250
40-55 VDC-> +44V W250 W250 DPAK-3 W100 PhantomPower 10R
10R 10R 4R7 1206
6817 +
1206 1206 D3
SOT-23
0805
Load - 20mA max. Spkr S5
24V HORN- 4
R207 50V
HORN_GND 4 W12:4
W100 C146
R208 +88V -
W100
50V

15K0 Q16 4.3X3.9


392R
1U

0805
C145
4.3X3.9 SOT-23
7838 0805 HORN
3
1U

MMBT3904 ClassName: +Hi 4 W12:3


H D22 SP1 H
L7 S3D WOOFER+
DO-214AB
WOOFER_OUT WOOFER+ 2
WOOFER_OUT 4 W12:2
192UH _W1
PHgnd 6562
D23 ClassName: AmpOut
S3D R42

W125
ClassName: AmpOut DO-214AB 1
HORN-

MT2
30K0 Q5 4 W12:1
CH_GND_ 0805

D2PAK
Connection to CHGND1 in
ClassName: -Hi 7915

MT1
I PreAmp through the chassis. PS_GND WOOFER- Input PCB Power Supply PCB
-88V Q6:1
R44 I
8 LO- 8 T810-600G-TR
Use a wire to connect these two W250 WOOFER

G
7 LO+ 7 C51
points when working on the bench. RAD POLY 10R
6 HI- 6 100V 1206
MuteGND 4U7 MBS4992
5 HI+ 5
5190
4 D_GND_ 4 {Voltage}

16V
3 D_GND_ 3 TO92
HORN_PRE_GND_ 2 +15V_ 2
C53
1 -15V_ 1

10U
5X5.5mm

WOOFER-
_W? _W? WOOFER_GND
J
DGND_ J
D_GND_
Q6:2
Input PCB Power Supply PCB 1
NC
LVGND_ 6 +88V_S 6
LVGND_
5 WOOFER+_S 5
4 HORN+_S 4
3 D_GND_ 3
Woofer_PRE_GND_ 2 96KHZ 2
1 +24V_ 1 Section: Power Supply
K _W? _W? Product(s): EF10P-EF12P-EF15P K
PCB#: M1497 Rev#: V01 EML Rev#: 01 Sheet 8 Of 11
Modified: 2019-10-09 File: POWER SUPPLY.SCHDOC Tmp Rev: V031
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

PCB ASSEMBLY DOCUMENTATION


A A

B B

SPECIAL PRODUCTION NOTES PCB HARDWARE

1. ADD RTV BETWEEN ALL TALL COMPONENTS AND AREAS WHERE


C
INDICATED. C

2. BEND C51 TO BOARD AND APPLY RTV TO HOLD IT.

D D

E E

F F

G G

H H

I I

J J

Section: Assembly Documentation


K
Product(s): EF10P-EF12P-EF15P K
THIS SHEET CONTAINS SPECIAL PRODUCTION NOTES AND A LIST OF PCB HARDWARE PARTS REQUIRED FOR THE BUILD. PCB#: M1497 Rev#: V01 EML Rev#: 01 Sheet 9 Of 11
Modified: 2019-10-09 File: Assembly.SchDoc Tmp Rev: V031
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

DESIGN HISTORY AND INFORMATION


A A

B B

CHANGE HISTORY POTENTIOMETERS AND KNOBS

# DATE VER# PC# DESCRIPTION OF CHANGE POTENTIOMETERS AND KNOBS


C C
1 03-MAR-2017 V01 . RELEASED FOR PRODUCTION REF FUNCTION POT# KNOB#
2 OCT-26-2017 V01 9116 MARKED W3 CONNECTOR - YS PART# 4018 AS DNS P1 MASTER LEVEL 4462 8653
3 NOV-14-2017 V01 . CHANGE FUSE PART NUMBER FOR CE FROM 2475 TO 2473 (T1.6A) P2 LINE LEVEL 4459 8653
4 Oct-09-2019 . 9434 Update labels on W6 and W7 connector pinout drawings. P3 MIC LEVEL 4459 8653
5 . . . . . . . .
6 . . . . . . . .
D
7 . . . . . . . . D
8 . . . . . . . .
9 . . . . . . . .
10 . . . . . . . .
11 . . . . . . . .
12 . . . . . . . .
"STYLE_P32"

13 . . . . . . . .
E E
# DATE VER# PC# DESCRIPTION OF CHANGE . . . .
1 . . . .
2 . . . .
3 . . . .
4 . . . .
5 . . . .
F 6 . . . . F
7 . . . .
8 . . . .
9 . . . .
10 . . . .
11 . . . .
12 . . . .
G G
13 . . . .
# DATE VER# PC# DESCRIPTION OF CHANGE
PINOUT DIAGRAMS
1 . . . .
2 . . . .
3 . . . .
4 . . . .
H H
5 . . . .
6 . . . .
7 . . . .
8 . . . .
9 . . . .
10 . . . .
I
11 . . . . I
12 . . . .
13 . . . .

J J

Section: Design Information And History


K THIS SHEET CONTAINS A CHANGE HISTORY LOG, A LIST OF THE POTS & KNOBS AND A LEADS & PINS REFERENCE SECTION. Product(s): EF10P-EF12P-EF15P K
PCB#: M1497 Rev#: V01 EML Rev#: 01 Sheet 10 Of 11
Modified: 2019-10-09 File: History.SchDoc Tmp Rev: V031
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
1 2 3 4 5 6 7 8 9 10 11

A A

B B
PF3
CNR2

PF4
PF1

C MODEL NAME TLH3 C


PCB No. Rev INS1 CNR1

EC100 PF2

CNR4 TLH4

D D

TLH5
CNR3

CRG1

E DOCUMENTATION E

PLASTICPIN Blank PCB


PCB1
ClassName: PLASTICPIN
F F
RTV_HOLES
ClassName: RTV_HOLES AI Sub-Assembly
BREAK AI-ASSY1
ClassName: BREAKHOLES
G G
CHASSISSCREW
ClassName: CHASSISSCREW
Section:

Product(s): EF10P-EF12P-EF15P
H PCB#: M1497 Rev#: V01 EML Rev#: 01 Sheet 11 Of 11 H
Modified: 2019-10-09 File: ECO.SCHDOC Tmp Rev: V031
1 2 3 4 5 6 7 8 9 10 11
Score

Score
EF10P-EF12P-EF15P -----------Wave Solder------------>
M1497 V01

WOOFER+
WOOFER-
DNS
Input/Processing 1 of 3 HC3

C48 6451

HORN+
R68
47P

C81 47P

HORN-
C82 R65
6543 3966 LP1
300
J3 U8 DNS

C85

EF10P-EF12P-EF15P
1K02
RTV
R67 10K00
R72 R166 LD3
C46

10K00

M1497
R73
C83 4148 D31 DNS R162

7K50
R74 10K00 1K02 DNS

470P
MC33078
22U R64
100N/250V 4N7/250V
W4_GRN w/Male QC
47P C84 4148 DNS R163

R167
D32

V01
DNS

4162
_W1
RTV 5242
DNS DNS R165

10K00
R138 681R R71 R164
22U

R75
C80

4K75
P2
4090

R88
30K0

WHT
10K00

LINE IN
LINE IN
R69

U10 4148

2K74
R89
D36
R79
10K00 10K00 R78
1 4 1300UH

4459
LINE
W13_
2390

1
DNS 6492 RTV

W11
MC33078 R86
L5 RTV
ESD

2K74
10K00

R81
10K0
3 of 3 4162

R87

470P
C86 R153

100N
100N
47R

C76

RED
10K0
J4 R77

C148
C142

C77
47R R152
D38 R91 10U 5266

R98
10K0
3466

R160
33U

GND
U11

4148
D37

C47
4148 RT V RTV

R94
RTV

64K9
SMAJ150CA 10K0 R90

DNS
U9 MC33078
5933

R95
C93 47P
2K74

C87 R93
680P
C88
D35
R92 470P
10K0 R80
680N/250V
MC33078
4U7/100V

20K5
100N
68N
10K0
33U 475R0 475R0
100N
47R PZ
C51

C147
C70 R151
475R0 475R0
47R R150
Comment

100N
680P

4U7
4010

30K0

C90
R103 C94
22U

C91
1K02
470P R100
R210 R213 2K74

R99
300 300

C95 R48 1K02


.475 .475
C92

C71

MIC
R101

4459
619R0
2 1
619R0

R97

C89
R96
R58 1K02
C68 2N7

C58 2N7
1K02
.225
3
D25
R102

R143

XF_Primary_240VAC
U7 4148 R44

C22
R211
619R0

619R0

Q6
P3
5190

XF_Primary_120VAC
10R
R212
K1 Q5

47P
1M
L7
MC33078

R57
BlankSize - 9100x8050

W7_

1K800

1K800
7915

330R0
MIC IN MAIN INPUT

R82
C1 C2

1
R85

R42 30K0
.175 330R0

D27 4148
U6

10U
R47 15K0
+24vIN

R83
1U R209 100R 100R R215
3696

1
R49

10U
1K02 6562

1K02
R84
R217 100R 100R R216 MC33078

4148
D26
WOOF_CLK

R149

4147
C149

4147
C53

47R
D23

1
2327
R51 C21 DGND W12

3522
R60 NC NCL NCR R145
J1

R76
NO

C59
J5 WOOF-

C69

C60
10K00

10K00
100N

100N

100N
120K0
CL CR
WOOFER+_S

S3D
C64 D34 4148 1K02 120K0
WOOF+
4090 HORN-

3538
C61 HORN+_S

C67
100N NOL NOR
470P 470P R70 17K8 S4 R146
HORN+ L6
1M 1M
47R R148
Clip 7837
+HiV_S
R202

Q8
MixerEnable 120K0

6
R142

1M

C66
1M

R52 LD4 D33 R144

18V0
475R0 R55 Spkr
475R0
R137

4.7UH
R59
100N
R63 200R 10U 1K02 P1
100N

R214

MASTER
R10
SMAJ150CA

D22
200R
R50

C32

S3D
LimitLD1 10R
10K0

C144
C143

22R
562R0 C49

4462
C38

R46
2N7

100N
R53 5N6 R38
204.47 (mm)

R56
R54

LVGND

LOOUT
4U7
D28

C78 470P 1K62 8K25 470P C65


6535

UT
WGND
+24V

+15V

+80V

+80V
-15V

-80V

-80V
HI+

LO-
R182 R185

O
3K92
R181 R183

1K50

1K50
1K02

1
W9
W10
LO
MC33079D
R30

M1497 V01
R29 10K0
2K2
W2 1M
R134

D7

C141
R174 18V0
100R
1K50

1K50
100R

100N
C5 R28
Q10
R17 100R

R200 47R

+80V_H
MUTE

LO+

HIOUT

HIOUT

LOOUT
-80V_H

+44V
HI-

+24V_
96KHZ
-24V

-44V
Q4

R176 R178
R175 R177
DNS Q9 R129
EF10P-EF12P-EF15P

100N
U15
1U

7837
C74
C102 C100 470P 470P R199 47R
7986

3K32
10K0

R128 U17 1K50 HORN_PRE_GND


M1497 V01
100N

8
100R
100R
1K50
1K50
3K32 C39
LM1117-5v R130 LD2 C63
ES1H D2
C45

R192
R188
R180
R179
R187
THRU

1K50 HORN_PRE_OUT
100R

7986

3K32
10K0

R193
R15

R157
3K32
R131
Mode 47R ES1H D1 PowerSupply 2 of 3

BlueTooth
J2 R133 S3 W OOFER_PRE_GND
R135

3K32
Mode
100R R16

7986

RTV
10K0

Sub
W OOFER_PRE_OUT

2328
3522

NCL NCR NCL NCR NCL NCR


3K32

3439
Q11

S3D

S3D
R196 30K0

R136

DGND
3439
R132

CL CR CL CR CL CR

D10

D19
NOL NOR S2 NOL NOR
C98 NOL NOR
Ph+24v RTV
4148
D4

S1 100N
4140 C105 C101 10U C99 100N 47R C97 R154 +15V RTV 4700U/100V
C107
10U

C96 R155
C132 C79 10U

10U 5910
R104

2N7 100N 47R


5910
R107
C104
C103

R8 30K0 R189
-15V
C138

4K75 R186 C114 C113

1
U16
R21

L12 R111 R110


R61 15K0 C106 100N 100P R184 15N

W6_
1N5
C112
4700U/100V RTV
R22

4K75 4K75 C137 D13

1
10U
10K

10K

R62 10U 100P 1K800 1K800


R105

2N7
47R
47R

C146
PCM1796

Q3 7701 7701 Q7 100U


C72
C139
C136

S3D
600R
100N

R198 U3
22R 1U
C110

MC33079D

R195 10R0 10R0 15P 100N


L10
100N

10K

100N
C29
100P
100P

600R
10U

100N
R197 30K0 C111

1
100N

R206
R7 10K0 C26 C133 10U
4R7
C62
C73
C27

AK5572
R26
C31

10U
U12

C134 D21
100N 10U C108 100N
R106
47R
10U
10U

MKL15Z64VLH4
C25

C33

5860
100N 100N
47R 10U 1K800
RTV
R13

C37 U19 1K800


47R

R14

S3D
C135
C35
C36

C75 15N 1N5


10U

1R0 C109 R9 10U


100N

R194 C40
C118 R121 R120
3300U/35V
47R
47R

N1 C14 10U C23


17K8

4K75 100N C123 C121


10U C140 4K75 10U

3300U/63V
C124

W8
100R 10U R119 R118 C122
C120 R115 C116
R113 R109 C20
4K75
1

4N7

C42
R172

C12 Q1

R173 R168 100N


4K75

R117
R123
R116
R122
C119 R114 C115
R112 R108

600R L4 R11 C117


200R0

200R0

4K75

47R
15K0

4N7

TP1
7837

E
100N

1K02
R170

R27
RTV
100N

100N
100N

R169
C24

4148
R3
DNS
DNS

5860

D8
R171
10U R25 N2
DNS

C18
DNS
DNS

C126 C125 4148


200R0
15K0
C30

ADAU1701

C28 C9 C19

5670
DNS
DNS

100N

680P 680P
AmpBias
200R0

C8 U13 D9
10U
C7

DNS Q12 MicroPgm


10U 4K75 C11
RTV
5670 Adjust
C6

DNS
680P

100N
Q14

S3D
4

DNS MC33078

7
680P

100N

D17
AmpBias
10U

Q13
T RV 1.5mV
47R R12

HC2
100N

10U
475R0

475R0

4145

9
W13
TP2 4145
C41
1

U2
6

100N
BT_Pgm

C131
475R0

22U

W5_ C10 100N


C13

3N3 4148
100N
DNS
R24

7
2

C145
R23

D6 C34
R5 100R 100N
47P
1U RTV 3966

S3D
Q2 47P
U20

100N

LVC1G80
5V1 600R
8
3

U1
W1
2K74 4148 D3
R208 RTV 5670
MMBT3904
LVC1G80

12.288
5860
22U

24V
4148
9
4

2K74
4148
1K800

1K800
47R R147

GRN w/Female QC
R207
4148

392R
15K0

C52
3300U/63V D11
W3

47P C130 R205


10

L3
W4
5

C16 D42 C150


CYBLE-012011-00

3300U/35V
R2

U4 C15 C128 C127 Q16


600R 220N 4148 10R
R19
R20
C4

5860
CYBLE-012011-00
17K8

17K8

17K8

L2 R125 D40
C54 10N

L8 C56 C57 C17 L9 2K74


1U

D14
C3

R66

S3D
D43 R126
D41 R124

D20
D39 R18
100N

2.2UH

C129
100U

Q15
10U

10R

D44
120uH
MJD112

S3D
D24

RTV
47R R1 R127
5670 RTV
R204
15U
MBRA340
R45

2K2 22R C44 C43


C1
1U

LM2671
600R
L1

47P

E
WOOFER_PRE_GND
WOOFER_PRE_OUT

HORN_PRE_GND

C2
HORN_PRE_OUT

100N
R156

C50
U5
Note! 7A
C55

R34

C42 and C43 are 5860

S3D
WOOF_CLK

WOOFER+_S

S3D

S3D

S3D
HORN+_S

C41 and C44 are 5670 D18


Ph+24v
+24vIN

DGND
DGND

+HiV_S

+15V

7A
-15V

D16

D15 D12
R31
CLINCH
W7 W6
Score INSERT 11 2327 6 1 2328 8
ORIGIN
VCD ORIGIN
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

PCB ASSEMBLY DOCUMENTATION


A A

B B

SPECIAL PRODUCTION NOTES PCB HARDWARE

1. ADD RTV BETWEEN ALL TALL COMPONENTS AND AREAS WHERE


C
INDICATED. C

2. BEND C51 TO BOARD AND APPLY RTV TO HOLD IT.

D D

E E

F F

G G

H H

I I

J J

Section: Assembly Documentation


K
Product(s): EF10P-EF12P-EF15P K
THIS SHEET CONTAINS SPECIAL PRODUCTION NOTES AND A LIST OF PCB HARDWARE PARTS REQUIRED FOR THE BUILD. PCB#: M1497 Rev#: V01 EML Rev#: 01 Sheet 9 Of 11
Modified: 12/3/2019 File: Assembly.SchDoc Tmp Rev: V031
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

DESIGN HISTORY AND INFORMATION


A A

B B

CHANGE HISTORY POTENTIOMETERS AND KNOBS

# DATE VER# PC# DESCRIPTION OF CHANGE POTENTIOMETERS AND KNOBS


C C
1 03-MAR-2017 V01 . RELEASED FOR PRODUCTION REF FUNCTION POT# KNOB#
2 OCT-26-2017 V01 9116 MARKED W3 CONNECTOR - YS PART# 4018 AS DNS P1 MASTER LEVEL 4462 8653
3 NOV-14-2017 V01 . CHANGE FUSE PART NUMBER FOR CE FROM 2475 TO 2473 (T1.6A) P2 LINE LEVEL 4459 8653
4 Oct-09-2019 . 9434 Update labels on W6 and W7 connector pinout drawings. P3 MIC LEVEL 4459 8653
5 . . . . . . . .
6 . . . . . . . .
D
7 . . . . . . . . D
8 . . . . . . . .
9 . . . . . . . .
10 . . . . . . . .
11 . . . . . . . .
12 . . . . . . . .
"STYLE_P32"

13 . . . . . . . .
E E
# DATE VER# PC# DESCRIPTION OF CHANGE . . . .
1 . . . .
2 . . . .
3 . . . .
4 . . . .
5 . . . .
F 6 . . . . F
7 . . . .
8 . . . .
9 . . . .
10 . . . .
11 . . . .
12 . . . .
G G
13 . . . .
# DATE VER# PC# DESCRIPTION OF CHANGE
PINOUT DIAGRAMS
1 . . . .
2 . . . .
3 . . . .
4 . . . .
H H
5 . . . .
6 . . . .
7 . . . .
8 . . . .
9 . . . .
10 . . . .
I
11 . . . . I
12 . . . .
13 . . . .

J J

Section: Design Information And History


K THIS SHEET CONTAINS A CHANGE HISTORY LOG, A LIST OF THE POTS & KNOBS AND A LEADS & PINS REFERENCE SECTION. Product(s): EF10P-EF12P-EF15P K
PCB#: M1497 Rev#: V01 EML Rev#: 01 Sheet 10 Of 11
Modified: 12/3/2019 File: History.SchDoc Tmp Rev: V031
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
1 2 3 4 5 6 7 8

A A
Assembly History
Assembly.SCHDOC History.SCHDOC

B B

WOOFER AMP
HORN AMP
C HI- C
1

HORN AMP.SCHDOC
Hi- 26 W1_:1

WOOFER AMP.SCHDOC
HI+ HI-
2
Hi+ 26 W1_:2
HI+
MUTE 3
W1_:3 26 MUTE MUTE
-15V 4
W1_:4 26 -15V -15V
D 5 -80V_H D
-80V_H 26 W1_:5 -24V
+24V -24V -80V_H
6
W1_:6 26 +24V +24V
-24V 7 -24V
-24V 26 W1_:7
-24V
LVGND 8
W1_:8 26 LVGND LVGND
9 -44V
E -44V 26 W1_:9
-44V
E
+15V 10
W1_:10 26 +15V +15V
LO+ 11
W1_:11 26 Lo+ LO+
LO- 12
W1_:12 26 Lo- LO-
96KHZ 13
F W1_:13 26 96KHz 96KHZ F
-80V 14
W1_:14 26
-80V
15 HIOUT
26 W1_:15
HIOUT
HiOut -80V 16
W1_:16 26 -80V -80V
17 HIOUT
26 W1_:17
G HIOUT G
WGND 18
W1_:18 26 WGND WGND
LOOUT 19
W1_:19 26
LOOUT 20 LOOUT
W1_:20 26
+44V LOOUT
21
+44V 26 W1_:21
+44V
H LOOUT 22 H
W1_:22 26 LoOut LOOUT
23 +24V_
+24V_ 26 W1_:23
+24V_
+80V 24
W1_:24 26
+80V
25 +80V_H
+80V_H 26 W1_:25
+80V_H
+80V 26
I W1_:26 26 +80V I
+80V
MuteFets MuteFets
ECO
ECO.SCHDOC

J J

* Product(s): .
EF12_15_215P-PSA1-SA102_153
* Description: Powered speaker cabinet
*
K * PCB#: M1498
X8025 Rev#: V05 EML Rev#: 01 Sheet 1 Of 5
K
Modified: 2020-02-03 File: Top Sheet.SchDoc Tmp Rev: V032
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

A COR6103T
R61_3T A
+80VH PO080V0H
COD37
PIR6103T01W125PIR6103T02 +80V_H
D37 0805
PID3702
PID3701 0R0 PIQ902 COQ9 PIR6102T01 +80V_H
COR139
R139 D
Q9 25
PIW1025
COR6102T
R61_2T 26 W1:25

W125
250V IRF530NS
SOT-23
PIR13901 W100PIR13902
0805
PIQ901
G
7840
DNS 0805
0R0
COR137
R137 COR140
R140 PIR6102T02
PIR137011W00PIR13702 PIR140011W00PIR14002
100R PIZD902 ZD9
COZD9 S
D2PAK

2512 2512 PIZD901 16V0 PIQ903 COR10602T


R106_2T
21 +44V
B 10K 10K SOT-23 DNS
PIR10602T01 W250PIR10602T02
1206
PIW1021 26 W1:21 B
COD36
D36 0R COD503T
D5_3T
+44V PO044V
PID3602
PID3601 PID503T01
PID503T02 +44V
COR138
R138
250V R19 MURA240T3
COR6
R6 COR19 PIQ10 2 COQ10 403D
PIC3201

450V
PIR13801W100PIR13802
PIR601W500PIR602
SOT-23
PIR1901 W500PIR1902
PIC20 1 Q10

50V
0805 D
2010 2010 100R PIQ1001 IRF530NS COC32
2K2 2K2 C32
COC20
C20 G 7840
PIC320

100N
1206
COR136
R136 COR43
R43
PIC20 2

1N
0805
C
200 WATT HORN POWER AMP PIR13601W500PIR13602 PIR4301 W500PIR4302 PIZD802 COZD8 S
D2PAK
C
2010
2K2
2010
2K2
PIZD801 ZD8
16V0 PIR3602 PIQ10 3 -44V
SOT-23
COR36 R36 COD3
D3

W125
PID4202 COD42 47R PID301
PID302 PO024V0
+24V_
PID4201 D42
250V PIR3601
0805
MURA240T3
COR118
R118 PIQ1 02 403D 23 +24V_
PIR11801 W100PIR11802
SOT-23
PIQ1202 COQ11
Q11
PIW1023 26 W1:23
Set to 1.5mV COR134
R134 COQ12
Q12

STB13007DT4
0805 PIQ1101
POHi0
Hi+ 2K74 PIR13401W100PIR13402 PIQ1201
2SC4027 2SC4027
D D
COC25
C25 PIR12602 0805
DPAK3 PIQ1302 7017 PIQ1502
HI+ COR47
R47 COR120
R120 U13:2 COR126
PIR6401
R126 COR64
R64 PIR2901
221R PIQ12037017 COQ13
Q13
PIQ1 03 DPAK3
COQ15
Q15

W125
2 5 OPA1652
W1:2 26 PIW102 PIR4701W100PIR4702 PIC2502 PIC2501 PIR12001 W125PIR12002 NET00033 PIU1305 17K8 PIP601COR29
0805 10U 16V 0805
PIC61050V
+ 6851 COR131 0805
R29
COP6
PIQ1301 D2PAK PIQ1501 D2PAK STB13007DT4

*
R131 PIR12601 COR66 P6
1K0 SMT
NET00037 14K 7 COR72
R72 PIQ1303 6848 COR61
R61 PIQ1503 6848
PIR12102 COR121 COC61
C61
PIU1307 PIR13101 W125PIR13102 R66
PIR6602W100PIR6601
PIP602
B
10K PIR7202W100PIR7201 PIR6101
COTP1
TP1
R121
PIC6102 0805

MMBTA64
W100

1N
SO8 PITP101
MMBF4391LT1 10K0
0805
6 47R 4512 221R PIR4 02 PIR4502 HORN
- 100K0 PIR4602 PIR4802
PIQ1401 PIU1306 .
PIC2701 0805 COR44
R44

W500
COR45

25V
COQ14 0805 R45

NET00032
0805

W500
Q14 PIR12101 COR117
R117 COR46
R46 COR48
R48
OUTPUT

W500

W500
E
D
NET00036
PIR11701 W125PIR11702 PIP603 COC27
C27
PIZD702 ZD7
COZD7 220R 0R27
220R
1210
0R27
2010 COR116
R116
E
POMuteFets
MuteFets
ELE 5mm
PIZD701 15V0 1210 2010 PIR4 01 PIR4501
PIQ1403 SOT-23 1K50
PIU1308 PIC2702 PIR4601 PIR4801 BIAS+ 0W8

10U
G S 7806 0805 COC64
C64 8 U13:3 1.5
PIR11601 PIR11602
COQ17
Q17 OPA1652
SOD-323
COR60 0R
R60
PIQ1402 COC26
C26
COR113
R113
PIC6402 PIC6401
47P 100V
PIQ1702
6851
V+
2010
PIR6001

PID1501 COD15 PIC2602 PIC2601NET00039


0805

PIC2801

25V
PIR11301 W100PIR11302 PIQ1701 V- SO8
10U 16V SOT-23
PIZD602 ZD6 PIR4902 COR49 PIR50 2 COR50
PID1502 D15 SMT
0805
10K0 PIU1304
COC28
C28 COZD6 R49 BIAS-
POHiOut
HiOut

W500
18V0 COR114
R114 4 ELE 5mm
PIZD601 15V0 COTP2
TP2 R50

W500
PIQ1703
PIC2802 0R27

10U
SOD-323 NET00034 PIR11401W125PIR11402 0R27 HIOUT 17
F HI- 8022 SOD-323 2010
W1:17 26 PIW1017 F
Hi-
1 26
PIW101 COW1:25
COW1:17
COW1:21
COW1:23
COW1:1
COW1:2
COW1:5
COW1:7
COW1:9
COW1:15
W1:1
0805
1K62
PIR4901 PITP201 PIR50 1
2010

Hi- PIQ1603 7016 PIQ1803


COC62
C62 NET00023
PIR12502 COR119
R119 COQ16
Q16 COQ18
Q18
COR125
R125

STB13007DT4
W100
PIR11901W125PIR11902 PIQ1601
2SA1552 PIQ1801 HIOUT
Hi-
DNS
PIC6202 PIC6201
DNS 50V 15K0 0805 DPAK3 PIQ1902Q19
COQ19 2SA1552 PIQ20 2 W1:15 26 PIW1015
15
0805 470R PIQ1602 7016 DPAK3 COQ20
Q20
0805
PIR12501 PIQ1802
PIQ1901 PIQ2001 D2PAK STB13007DT4
PIR5102 COR51
D2PAK
PIR3201
COR32
R32 PIR5202 COR52 6848 PIR6301 COR63
G
PIC6901 R51 3
PIQ1906848 PIQ20 3 G

W500
2010 R52 R63

W500

1W00
COC69
C69 220R 0R 220R 2512
1210
1210 MURA240T3 0R
COR112
R112 PIR5101 PIR5201
100N
50V
PIC6902 PIR130 2 COR130
R130
PIR11201 W125PIR11202 COD2
D2
PO024V

W125
PIR12701 COR127 470R PID202
PID201 -24V
0805 8K25 0805
R127

W125
0805 403D
-24V
470R
NET00014
PIR130 1 COD4
COR53
R53 COR54
R54 PIZD102 ZD1
COZD1 7 26
PIW107 W1:7
D4
PIR12702
0805 PIR5301W500PIR5302 PIR5401 W500PIR5402
PIZD101 16V0 PIQ2103
COQ21
Q21

SOT-23
H PID401
PID402 2010 2010 S H
2K2 2K2 IRF9530NS
COU13:1
COU13:2
COU13:3
U13:1 8V2 COR55
R55 COR141
R141 COR56
R56
3
PIU1303 OPA1652
SOT-23
PIR5501W500PIR5502 PIR14101 W500PIR14102 PIR5601 W100PIR5602 PIQ2101
G 7839
-44V
+ 6851 2010 2010 0805 D2PAK 9 26
PIW109 W1:9
PID30A02 COD30A COR132
R132 COD10
D10
CDSF4148

2K2 2K2 100R D


1
PID30A01 D30A PIU1301 PIR13201 W125PIR13202 PIQ2102

*OUTPUT FILTER ON POWER SUPPLY PCB


NOTE: MURA240T3
PID1001
PID1002
D1005

SO8 0805
403D
PID603T01PID603T02 -44V
47R 250V -44V
2
PIU1302 - SOT-23 COD603T
D6_3T
COR10702T
R107_2T
I NET00047 I
COR57
R57 COR58
R58 DNS
PIR10702T01 W250PIR10702T02
1206
PIR57011W00PIR5702 PIR58011W00PIR5802
PIZD10 2 ZD10 PIQ2203 0R PIR9702T01 COR9702T
COZD10 R97_2T

W125
2512 2512 S

PID102 COD1 10K


COD38
10K PIZD10 1 16V0 COQ22
Q22 DNS
0R0
D38 COR59
R59 SOT-23 0805
-80V_H
PID101 D1 SOT-23 PID3801
PID3802 PIR5901 W100PIR5902 PIQ2201
G 7839 PIR9702T02 5 26
PIW105 W1:5
250V 0805 D2PAK
SOT-23 250V 100R D
PIQ2202 IRF9530NS -80V_H
J COR9703T
R97_3T 0R0 J
-80VH PIR9703T01W125PIR9703T02
0805

Section: Horn Amplifier


Product(s): . EF12_15_215P-PSA1-SA102_153
K PCB#: M1498
X8025 Rev#: V05 EML Rev#: 01 Sheet 2 Of 5 K
Modified: 2020-02-03 File: HORN AMP.SCHDOC Tmp Rev: V032
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

A A

10 +15V
26 W1:10

Q7
MC7815BDT
+15V +5V
+24V IN
GND
OUT +15V
7846 R99 R76
+24V 6 DPAK3 1W00
B W1:6 26 B

10V
2512
C18 1K
50V D5 C2

10U
100N SOT-23 0805
0805
5V1

LVGND_
R87

10V
LVGND LVGND
W1:8 26
8 D6
SOT-23 C6

10U
0805
LVGND 5V1
C21 R16
C 50V 1W00 C
DPAK3 100N 2512

Lo- 7847 0805


1K
GND
R82
R26 -15V
0805 -24V IN OUT -15V -5V
MC79M15CDT ClassName: WoofOut
Q8 -15V
4 26 W1:4

D R41 D

1W00
2512
15K ClassName: Hi+
+80V
D14
26 +80V
200V

450V
26 W1:26
R31 SOD-323 R38

1W00

1W00
R33 +80V
2512
33K 24
DNS
1W00 47K
R11
2512
Q5 C9
26 W1:24

W125
2512 R10

W125
Lo+

100N
DNS 3K32 R39 D 1206

C3 0805
3K32
1W00 IRFS4227PBF
R5 R13 R25 R34 0805 G
LO+ 11 2512 7968
W1:11 26 W100 W100 W125 W125 C19 4R7
10U 16V D12 S
D2PAK
U3

50V
0805 0805 0805 0805 1206
E 1K0 0805
7K50 91K 0R0 MURA240T3 E

100V
1U 25V
R4

100V

W100
403D R14

1W00
C7 C5 IRS20957S 10K0 LoOut
R12 2512

1W00
4N7
0805
-5V +5V 1 VDD
0805 4R7 C17
CSH 16
1206 2512
C10 LOOUT

2U2
10U 16V 4R7 C23 1812 19

47P
0805 26 W1:19
R30 2 CSD VB 15 25V 10U

50V
20 LOOUT
R9
DNS
W100 1210 26 W1:20

W125
C1 C8
0805
3 14 LOOUT
0805 IN HO LoOut 22
N2 5

96KHZ R1 4 DNS

4N7
13 2 SO8 348R0 0805 26 W1:22
W1:13 26 W100
0805 470P 50V - V- 7993 D9 R27 100V 47P 4 VSS VS 13
2K74 0603
D17 R42 0805 C37 0805
D13 6 5 NC
W100
200V NC 12 W125
96KHz 200V 200V 0805
SOD-323
R15 3K32 R79
F SOD-323 SOD-323 V+ 6 11 F
1 N1

1K0 0805 0805


3 TL071 W125 VREF VCC
+ U5 D8 3K32
7 7 10
200V OCSET LO
50V

SOD-323 EC5
8 DT COM 9 C12
C4 10U 25V
+5V
10N

0805 SO16 1210


LO-

100V
W1:12 26
12 7884
+15_LS R40 D
Q6 WGND
R75 R8 IRFS4227PBF C16 18 26 W1:18
DNS 1W00

2U2
W125 W250 G 1812
Lo- DNS 1206
2512 7968
Lo- 0805 10R 4R7 D2PAK
S
G G
R35

W100

450V
Lo- 10K0
0805 2U2 2U2 WGND
+5V C13 C14 C15

200V
100N
R23

200V
W125

1206 2220 2220

33K U1:2 WGND


LM393D 8 6 R20 R28 -80V
0805
W125

W125
R21 14

W125
MMBT5401 7661 - 3K32 U1:1 3K32 3K32
26 W1:14
R24 V+ 0805 2 LM393D 0805
0805 16 -80V
7837 SOT-23 7 - 26 W1:16
W100 U1:3 7661
Q2 0805
V- R2 1 ClassName: Hi-
W063

100K0 -80V
R7 +5 47K
W125

H 4 47K SO8 H
R109 R18

W250
0805
3 + WGND 1206
MUTE W125 1M
R22 100R
W125

0805

MUTE 1M -5V 150K


W1:3 26
3 0805

Q4
DPAK3 MJD243T4G
7844 +15_LS
MuteFets
MMBF4391LT1 D11
100V
25V

I Q3 15V0 I
SOD-323
D C11
SOT-23 C29
1U

7806 1206
100N

G S 1206

D7
18V0
SOD-323
Lo-

J J

Section: Woofer Amplifier/PS


K
Product(s): .EF12_15_215P-PSA1-SA102_153 K
PCB#: X8025 Rev#: V05 EML Rev#: 01 Sheet 3 Of 5
M1498
Modified: 2020-02-03 File: WOOFER AMP.SCHDOC Tmp Rev: V032
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
DESIGN HISTORY AND INFORMATION

CHANGE HISTORY POTENTIOMETERS AND KNOBS

# DATE VER# PC# DESCRIPTION OF CHANGE


1 OCT-4-2017 V02 . RELEASED VERSION 2.
2 APR-27-2018 V03 9129 MOVED R61_3T AWAY FROM 80V CONNECTOR PAD
3 Aug-08-2019 V04 9449 C12&C23 to 10U/25V. Change VBE res to center trim pot. Add D4 to cut turn off noise.
4 FEB-03-2020 V05 9508 Added 1N cap and 47R resistor between gate and source of Q10
5 . . . .
6 . . . .
7 . . . .
8 . . . .
9 . . . .
10 . . . .
11 . . . .
12 . . . .
13 . . . .
# DATE VER# PC# DESCRIPTION OF CHANGE
1 . . . .
2 . . . .
3 . . . .
4 . . . .
5 . . . .
6 . . . .
7 . . . .
8 . . . .
9 . . . .
10 . . . .
11 . . . .
12 . . . .
13 . . . .
# DATE VER# PC# DESCRIPTION OF CHANGE
PINOUT DIAGRAMS
1 . . . .
2 . . . .
3 . . . .
4 . . . .
5 . . . .
6 . . . .
7 . . . .
8 . . . .
9 . . . .
10 . . . .
11 . . . .
12 . . . .
13 . . . .

Section: Design Information And History


THIS SHEET CONTAINS A CHANGE HISTORY LOG, A LIST OF THE POTS & KNOBS AND A LEADS & PINS REFERENCE SECTION. Product(s): .
EF12_15_215P-PSA1-SA102_153
PCB#: M1498
X8025 Rev#: V05 EML Rev#: 01 Sheet 4 Of 5
Modified: 2020-02-03 File: History.SchDoc Tmp Rev: V032
M1498 V05 C37 C5 M1498 V05 47P 10U

R21

3K32
C19

3K32
R15

3K32
R28

1U
0R0
C29 C11 R12 100N 1U 4R7
V05 V05
R8 10R

MURA240
U3 R79 IRS20957S 3K32

D12

10U
C23
Q4
7844

R11
10U

3K32
C12

7806
Q3
R24

LM393D
100K0

3K32
R10
R27

0R0
U1

1M
R7
R41 15K
R23

33K
7837
Q2

R34 R39 D14 0R0 4R7

18V0
200V

D11

15V0
D7

100R
150K
R18
R22
C10

47P
3K32
R20
R26 R31 47K

47K
R2 0R0

4R7
R40

10U 10U
C2

R25

91K
D8 200V

IRFS4227PBF
R16

R99

1K

1K
D5 D9 R14 5V1
C7 4N7
200V 4R7
R87

0R

33K
C6

100N
5V1
D6

C9

4N7
R9 C8
348R0

10K0
R38

R4
R42 1K0
R76
Q6 C14 0R 2U2
R82 0R

TL071
Q7
U5
EC5 MC7815BDT EC5

IRFS4227PBF
C18 C15 Q5 100N 2U2

10K0
R35

10N 10U
C3

R13 C13 7K50 100N


C21 Q8 D17 100N MC79M15CDT 200V

1K0
C4
R5

D13 C1
R1 C16
C17 200V 470P
2K74 2U2 2U2

7883
D6_3T R61_3T 0R0
R109 R97_3T D5_3T 1M 450V
D3 0R0 MURA240

MURA240
MURA240
D2 MURA240
C32 100N

10K

10K
R140
R137
R58

R57

10K

10K
Q22 ZD10 R59
ZD9 Q9 IRF9530NS 16V0 100R
16V0 IRF530NS
D37 250V
D38 250V
D36 R139 250V 100R

1N 47R
C20 R36

Q12 2SC4027
Q16

R134 221R
R119 ZD1 Q21 Q10 ZD8 470R 2SA1552 16V0 IRF9530NS IRF530NS 16V0
R51

R138 D42 100R 250V


D1 220R
D10

250V

100R

250V
R56

ZD7
R141 ZD6 R19
2K2 15V0 15V0
2K2
R63

0R
10U

10U
R54 C28 C27
R43 Q13 2K2 2K2 STB13007DT4
Q19 STB13007DT4
R55 R6
2K2 2K2
R49 R53 R116 R136
0R27 2K2 1.5 2K2

0R27
220R
R46
R48

R50 R60 0R27 0R


Q11

R72 2SC4027 221R


R114
R118

R113

0R27
D30A

1K62

10K0
2K74
Q20
R132

R117 C64

4148

1K50 47P
R52 TP1 STB13007DT4
R45

220R TP1

47R
U13 OPA1652 TP

220R
0R
R44

R64 0R
C61

R61

1N
C69 100N
R126 R131

TP

47R
TP2 Q17 D4 R29 TP2 MMBTA64 8V2 0R
P6 .
R112

P6
2SA1552 470R

STB13007DT4
R127
R125

R130

100K0
470R
15K0
R66

8K25

17K8
0R

R32 Q15
R121 R120

14K
Q18

10U
C26
D15

18V0
10K0
C25 Q14 10U 7806
R47

1K0

Designators Values
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

PCB ASSEMBLY DOCUMENTATION


A A

B B

SPECIAL PRODUCTION NOTES PCB HARDWARE

SCREWS AND BOLTS


1-Place Connector (#7883) on all boards on panel BEFORE Reflow
C Oven. C

D D

E E

F F

G G

H H

I I

J J

Section: Assembly
K Product(s): . M1498/M1501 K
THIS SHEET CONTAINS SPECIAL PRODUCTION NOTES AND A LIST OF PCB HARDWARE PARTS REQUIRED FOR THE BUILD. PCB#: X8025 Rev#: V05 EML Rev#: 01 Sheet 3 Of 3
Modified: 2020-02-03 File: Assembly.SchDoc Tmp Rev: V032
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
DESIGN HISTORY AND INFORMATION

CHANGE HISTORY POTENTIOMETERS AND KNOBS

# DATE VER# PC# DESCRIPTION OF CHANGE


1 OCT-4-2017 V02 . RELEASED VERSION 2.
2 APR-27-2018 V03 9129 MOVED R61_3T AWAY FROM 80V CONNECTOR PAD
3 Aug-08-2019 V04 9449 C12&C23 to 10U/25V. Change VBE res to center trim pot. Add D4 to cut turn off noise.
4 FEB-03-2020 V05 9508 Added 1N cap and 47R resistor between gate and source of Q10
5 . . . .
6 . . . .
7 . . . .
8 . . . .
9 . . . .
10 . . . .
11 . . . .
12 . . . .
13 . . . .
# DATE VER# PC# DESCRIPTION OF CHANGE
1 . . . .
2 . . . .
3 . . . .
4 . . . .
5 . . . .
6 . . . .
7 . . . .
8 . . . .
9 . . . .
10 . . . .
11 . . . .
12 . . . .
13 . . . .
# DATE VER# PC# DESCRIPTION OF CHANGE
PINOUT DIAGRAMS
1 . . . .
2 . . . .
3 . . . .
4 . . . .
5 . . . .
6 . . . .
7 . . . .
8 . . . .
9 . . . .
10 . . . .
11 . . . .
12 . . . .
13 . . . .

Section: Design Information And History


THIS SHEET CONTAINS A CHANGE HISTORY LOG, A LIST OF THE POTS & KNOBS AND A LEADS & PINS REFERENCE SECTION. Product(s): .riations]
PCB#: [No
X8025 V Rev#: V05 EML Rev#: 01 Sheet 4 Of 5
Modified: 2020-02-03 File: History.SchDoc Tmp Rev: V032
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

Input PCB Power Supply PCB


8 HORN_PRE_GND 8
A 7 HORN_PRE_OUT 7 A
6 WOOFER_PRE_GND 6
5 WOOFER_PRE_OUT 5
4 DGND 4
3 Ph+24v 3
2 +15V 2
1 -15V 1

_W6 3036 Cable _W6_ +HiV_S 6


6 W7:6
N25
WOOFER+_S 4
B 6 W7:4 B
Input PCB 3044 Cable Power Supply PCB N24
6 +HiV_S 6 HORN+_S 5
6 W7:5
5 HORN+_S 5 N23
4 WOOFER+_S 4
3 DGND 3
DSP Output
2 WOOF_CLK 2
DSP.SCHDOC Output.SchDoc
1 +24vIN 1
C130 C131
_W7 _W7_

+88V~
WOOFER+~
HORN+~
22U 16V 22U 16V
C Preamp A/D Elec Elec C
Preamp.SchDoc ADC.SchDoc DGND
DAC_DATA DAC_DATA
AIN_HI_SENS+ AIN_HI_SENS+
DAC_BCLK DAC_BCLK 2
AIN_HI_SENS- AIN_HI_SENS- +15V 8 W6:2
DAC_LRCLK DAC_LRCLK
AD_Ref AD_Ref N17
AIN_LO_SENS+ AIN_LO_SENS+ HORN_PRE_OUT 7
HORN_PRE_OUT 8 W6:7 1
AIN_LO_SENS- AIN_LO_SENS- HORN_PRE_GND N13 8 -15v 8 W6:1
ADOUT ADOUT HORN_PRE_GND 8 W6:8 N18
GND AD_GND N14
Cannot open file E:\My WOOFER_PRE_GND 6
D
WOOFER_PRE_GND 8 W6:6
D
Documents\AD\M1496\A-D.jpg WOOFER_PRE_OUT N15 5
WOOFER_PRE_OUT 8 W6:5
Ph+24v N16

Power Supply / Speaker Out


POWER SUPPLY.SCHDOC

/RESET_DSP

RESET_DAC
MUTE

+88VSense

SPI_MOSI

SPI_MOSI
SPI_MISO

SPI_MISO
SPI_CLK

SPI_CLK
SS_DAC
LimitSig

SS_DSP
MCLK

MCLK
HORN+
WOOFER+
LRCLK

E LimitSig
MCLK

E
BCLK
Mode_Switch

Reset
Switch_Gnd
Sub_Switch
BT_Switch
CH_Gnd

Mode_G
Mode_B

Mode_R
LimitIn
ClipIn

HORN_PRE_GND_
Woofer_PRE_GND_

4 LVGND_
8 W6:4 -24V
-44V
DGND 3
F
6 W7:3 D_GND_ -88V F
N19 +44V
+24vIN 1 +24V
6 W7:1 +24v_
N20
+88V
Ph+24v 3 8 W6:3 PhantomPower
Microcontroller N21
WOOF_CLK 2
Microcontroller.SchDoc 6 W7:2 HORN_OUT
N22 HORN_GND

CH_GND_
ClipIn
LimitIn

SPI_MISO
SPI_CLK

+24vIN

MCLK
+88VSense

RESET_DSP
SPI_MOSI

SS_DSP

SS_DAC
RESET_DAC
WOOFER_OUT
R64 WOOFER_GND
265V

G 6543 G
48R
HC3
1 Switch_Gnd
Sub_Switch
CON_HOLE_125 BT_Switch
Mode_Switch
WOOF_CLK
Mode_R
Mode_G
Mode_B BLE
H H
/RESET_BLE /BLE_RESET
LimitLED

BT_UART_RX BLE_UART_RX
ClipLED

BT_UART_TX BLE_UART_TX
D_GND
CHGND2
BLE.SchDoc
Connected to CHGND1 through the chassis.
Use a wire to connect these two
points when working on the bench.
R63
W100

I 200R
I
0805

R10
W100

200R
0805
LP2
LD4 DGND
RED
LP3 Clip
LD1 7033
YEL
Limit 2495
7032
J J
2495

DGND

ECO.SchDoc
ECAD INCIDENTAL
Assembly.SchDoc
ASSEMBLY NOTES
Yorkville Sound Ltd. Product(s): EF10P-EF12P-EF15P
550 Granite Court Description: PS and Input
K History.SchDoc Pickering, ON K
DESIGN HISTORY Canada L1W 3Y8 PCB#: M1802 Rev#: V01 EML Rev#: 01 Sheet 1 Of 11
www.yorkville.com Modified: 2020-03-17 File: Top Sheet.SchDoc Tmp Rev: V031
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

R175

A
PreAmp CLIP
CDSF4148

D25
D1005

470P
0603
50V
W125
1K02
0805
A
U17:2 +15V +15V
C5 R199 R148
+15V_1
J1:2 MC33079D W125 W125
MAIN INPUT
R C58 6 - 47R 47R
7668 U17:5 U6:3 U7:3
R MIX+ U6:2 R176 R177 0805 0805
C59 R53 7

W125
MC33078 MC33078

50V
T T
MAIN INPUT
XLR-PHONE
MC33078 2N7 100V 8K25
W125 W100 AIN_HI_SENS+ 4 MC33079D 8 8
7817 7817

50V
6 7817 1K50 100R

50V
0805
- 0805 5 R178 7668

W125
S S 100N 50V SO14 C74
R47 R48 + 0805
1K50
0805 V+ V+ V+

100N

50V
0805
NCJ6FAV-0
0805
D26 7 0805
C141 C61
C143 W125 W125

100N
D1005 0805

100N
4090 R54 R50 R51 0805

W100
5 1K800 1K02 V- SO14 V- C60 V-
10K0 + SO8 SO8

100N
W100 W125 SO8 0805 0805 0805
B 0805 100N 50V B
10K00 CDSF4148 4 4

50V
0805 475R0 U7:1 0603
11
0805 0805 470P 50V
R52 MC33078 R192
C63 U17:1

W125

W125
R142 C64 R200 R149

W125
2 7817 -15V_1
J1:1 1M - C66 1K50

470P
MAIN INPUT
1M 0805
0603
MC33079D 0805 W125 W125
X2 0805 R214 2
XLR-PHONE 1 MainIn W125 - 7668 47R 47R BusGND
X3 N30 10U 16V R179 R180 -15V 0805 BusGND -15V 0805
+1/4 N31 562R0 1
3 AIN_HI_SENS-

50V
W125 W100
X1 N32 + SO8
5X5.5mm 0805
1K50 100R
U6:1 3 SO14
C65 + 0805 0805
SH

C69 MC33078

5N6
0805

50V
NCJ6FAV-0 R55 2 +15V

W125
R202 - 7817 R150

W125
4090
1M 1M R57 R58 R181 +15V_2
0805
0805 C67 100N 50V
D27 1 BusGND W125
W125
0805

470P
C C144 0603
D1005 W125 W125 47R U10:3 C
D28 R59 R60
3 1K800 1K02 3K92 0805 U11:3 U9:3
0805
W100 W125 + SO8 0805 0805
C68 R56 0603
8 MC33078 MC33078 MC33078

W125
DO-214ACBI 100N 50V 470P 50V
8 8
475R0 10K00 CDSF4148 1K62 7817 7817 7817

50V

50V
0805
SMAJ150CA 0805 0805
2N7 100V
0805
C78 U17:3 V+ V+ V+
SG1
0805 C70 C71
9 - MC33079D

100N

100N
0805 0805
7668 V- V- V-
SG2
R182 R183 SO8 SO8 SO8
MIX- 8
THRU

W125 W100 AIN_LO_SENS+ 4 4 4


Male XLR 10 1K50 R185 100R

W125
SO14 0805 0805
J2 + 1K50
0805
R151
-15V_2
W125
D 47R D
C22 -15V 0805 MicGND2
47P 50V LIMIT INDICATOR 470P
0603
50V R193

W125
4140 .
R143 0805 C100 U17:4 1K50
W125
NetC22_1 0805 +15V
13 MC33079D R152
1M U7:2 - 7668 +15V_3
C21

CH_Gnd W125
0805 R187 R188
R49 MC33078 14 47R
Connection to CHGND2 in LimitSig 6 W125 W100 AIN_LO_SENS- 0805 U8:3
- 7817
Power Supply through the chassis. LimitSig
W100 1K50 100R MC33078
N33 10V 10U D4 12 SO14 8
15K0 7 +3V3_UC + 0805 0805
7817

50V

50V
1206
Use a wire to connect these two 0805 R195 R197 R7
points when working on the bench. D1005 W250 W125 W100 V+
5 R8 C76 C77
E + E

W125
SO8 CDSF4148 10R 30K0 10K0 AD_Ref
CLIP INDICATOR

100N

100N
30K0 1206 0805 0805 0805
0805 Q3 0805
R198 V-
SO8
SOT-23 MMBTA14LTIG LimitIn W250 GND 4
R61 7701 10R

W100
Q7 1206

10V
15K0 R196 R153
0805 CLIP ClipIn -15V_3
DGND W125 SOT-23 MMBTA14LTIG W125
C25 7701 47R
30K0

10U
0805
0805 -15V 0805
LineGND2
J3:2 LEDGND_

10V
R62

W100
R 4K75
R
R67 R65 R68 0805 C75
T T L+

10U
LINE IN
F XLR-PHONE W125 W125 W125 0805
F
SG3
S S 10K00 1K02 10K00
0805 0805 0805 D31 +15V
CLIP
50V

NCJ6FAV-0
C81
4090 SG4 50V 47P D1005
C82
CDSF4148
47P

J3:1 0805
0805 U8:1
LINE IN X2 MC33078 R70 D33 Q8
XLR-PHONE
2 7817 W125 SOT-23 MMBT5401
+1/4
X3 N34 - C80 17K8 SOD-323
+15V_5
50V

X1 N35 1 0805
18V0
22U 25V 7837
C84 3 D34 R
Mode_R
SH

1210
+ R157
47P

0805 SO8
LINE IN

NCJ6FAV-0 G
G N36 Mode_G W125 +15V G
4090 D1005 B 47R
R74 R73 R75 CDSF4148 Mode_B
SMAJ150CA L- R76
0805

W125
W125 W125 W125

LD2
Mode
D35 10K00 1K02 10K00 K1:2 1K02
DO-214ACBI
0805 0805 0805
LINE 3696
0805 RGB
6001
0606LED
IGND R138
SG5 R78 R79 5
S-
W100 + SO8
W125 W125 4K75
10K00 10K00 U10:1 R69 0805 P2:1 7 -15V .
B
W125

U10:2 B LIN
0805 0805 30K0 6 R80 RELAY 1C
NC NC
MC33078 10K

UP
MC33078 -

MOMENTARY
N26 0805
7817 D32 W100

NetC83_1
H J4 6 2 7817 . CLIP Mode_Sw H
1 - 7817 - 10K0 Mode_Switch COM COM

3439
R81 D36 4459 MC33078

DOWN
0805 N37
4 D1005
7 1 U8:2 D1005 Sub_Sw
W100 CDSF4148 CDSF4148 U11:1 Sub_Switch
R 5 N38 NO NO
2K74 BT_Sw
T

S 5 3 C83 C142 MC33078


Ph+24v
0805
+ SO8 + SO8
P2:2 R71 R72 R77
2
BT_Switch
- 7817 N39

S1:1

S1:2
2 W125 W100 W100
LINE IN T R89 B LIN 22U 25V 10U 16V R82 R83
50V

3 R87 R88 681R 7K50 10K0 1


R86 LineGND1 10K 1210 5X5.5mm
MIX+
W100

W100 0805 0805 0805 W125 W125


3.5mm JCK 10K0
W125 W125
. C85 R91 .

W100
R215 R216 2K74 C86 330R0 1K02
W100

W100

4218 N27 0805 10K00 10K00 10K0 3 S4:1


4459 +
470P

100R 100R 0805 0603 50V 470P SO8 0805 0805


0805 0805

UP
0805
0805 0805

3522
Sub
UP DOWN
0603

DOWN
3522 MixerEnable
I R90 Connected to Main I

W100
R209 R217 10K0 UP DOWN Input at top left.
W100

W100

SG6
100R 100R 0805
S+ LineGND2

S2:1

S2:2
0805 0805
C87 R85 R84 S4:2 MIX-
W125 W125
680P 50V 330R0 1K02 3522
SG7 C147 0805
D37 D38 0805 0805
R92 R93 R94 NC NC
R210 M+ 25V 33U CLIP CLIP
W250

W100 W100 W100 UP UP


619R0 3439
1206 6x6mm 475R0 475R0 2K74 D1005 D1005
R95
MIXER ENABLE COM COM
50V

0805 0805 0805 CDSF4148 CDSF4148 W100 BusGND 2PDT MINI


R211 U9:1 DOWN DOWN
R160 C88 10K0 MOMENTARY
MIC IN

W100

W250 J5 MC33078
MIC NO NO
470P

J 619R0 DNS 0603 0805


J
2 7817
1206
0805
- C89 C90 C91 S3:1 S3:2

RELAY 1C
N28 R96
1 5 5
N29 W125 + SO8 + SO8

3696
R212 4U7 50V 100N 50V 68N 50V
W250 3 1210 1K02 7 0805 805 7
+ P3:1

K1:1
Switch_Gnd
50V

SO8 0805
619R0 MIC IN R97 B LIN
W125

R98
W125

1206 XLR FEML


30K0 P3:2 10K 6 6
4010 C92 0805 . - 7817 64K9 - 7817
470P

0603 4459 B LIN 0805


4459 MC33078 MC33078
50V

SG8 C148 10K C93


R213 R99 R100 R101 U9:2 U11:2
W250

C149 .
4.3X3.9 619R0
IGND
M- 25V 33U
W100 W100 W100
50V 47P Section: PreAmp
T

1206
C94
1U

475R0 475R0 2K74 C95 R102 R103


K
6x6mm
0805 0805 0805
0805
Product(s): EF10P-EF12P-EF15P K
W125 W100
22U 25V
680P 50V 1K02 1210 20K5 PCB#: M1802 Rev#: V01 EML Rev#: 01 Sheet 2 Of 11
0805 0805 0805 MicGND2
Modified: 2020-03-17 File: Preamp.SchDoc Tmp Rev: V031
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

A A
10u 10v X5R (is X6S)
R184
AD_Ref W100

10U
16V
0805
4K75

16V
R186

W100
0805
4K75 C134

10U
16V

10V
B 0805
C98 0805
B

10U

100U
C99

100N
0603

16V
C135 C133

10V
0805

100N
0603
C137 C136

100N
AIN_HI_SENS+

10V
3528 0603
AIN_HI_SENS+
100P

+5Vref
U19

TVDD 17

LDOE 45

VDD18 19

DVSS 18
VREFH1 3
VREFL1 2
C C
50V

C62
0805

R189

100V

W250
Voltage
0805
22R
1206
Reference
100P

2N7 C72
50V

C73 47 AIN1P Serial Output


0805

Delta-Sigma Decimation L12


D AIN_HI_SENS- 48 AIN1N HPF 37 D
AIN_HI_SENS- Modulator Filter DIF0 600R +3V3
38
AIN_LO_SENS+ DIF1 F0805
AIN_LO_SENS+ 25 BCLK
100P

BICK BCLK
5 AIN2P Delta-Sigma Decimation LRCK 26 LRCLK
LRCLK
AIN_LO_SENS- 4 HPF 27
100V

AIN2N Modulator Filter TDMIN R158


0805

ADOUT_
50V

C79 28
0805

SDTO1 W125 ADOUT


E DP 43 47R E
2N7

C101 39 0805
TDM0
100P

40
AK5572 TDM1
ODP 46
41
8279 PSN
50V

C132
0805

AIN_LO_SENS- QFN48
F F
31
6 AVDD CKS0
+5V
AD_GND 7 AVSS CKS1 32
10V

16V

CKS2 33
C138 C139 34
CKS3
10U

100N

0805 0603

G G
Controller
DGND

29 TESTO1
35 SLOW

49 Therm
16 MCLK

44 HPFE
15 TEST

24 MSN
23 PW2
22 PW1
21 PW0
20 PDN

30 OVF

42 I2C
36 SD
H H

+3V3_AD
MCLK
Reset

I DGND I
MCLK
Reset

J J

Section: A/D Converter


Product(s): EF10P-EF12P-EF15P
PCB#: M1802 Rev#: V01 EML Rev#: 01 Sheet 3 Of 11
K K
Modified: 2020-03-17 File: ADC.SchDoc Tmp Rev: V031
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

A A

+3V3
L2
600R
F0805

B +3V3_DSP B
+3V3_DSP
MCLK

16V

10V
16V

16V

16V

10V
16V

16V

10V
Q1 DGND C6 C7

100N

10U
0603 0805 R2

W100
C12 C13 C14 MMBT5401 +1V8 SUPPLY C8 C9 C10 C11
475R0

100N

100N

100N

10U
0603 0603 0603 0805
100N

100N

10U
0603 0603 0805 SOT-23 0805
7837 +3V3_DSP

NetQ1_1
C C
+3V3_DSP DGND

16V

25V
R3 +3V3
W125
1K02 C15 C16 OSCILLATOR L3
DGND

100N

3N3
0603 0805
0805
U2 600R
Q2

34

17
13
DVDD 24

DGND 12
DGND 25

IOVDD 18
AVDD 48
36

AGND 37
AGND 42
39
38
33
35

31
32
DGND ADAU1401 F0805

Vdd 4
AGND 1
DVDD

AVDD
VDRIVE
R5

MCLKI
OSCO

50V
CLK 3 OUT
D OSC W100 D

PLL_LF
MODE1
MODE0
PGND
PVDD 40
1.8V Reg CM 100R 7894 C17

220N
PLL 41
0805 1 1206
E/D

2 GND
FILTD
46

10V

16V

10V
VOUT0 LimitSig 12.288
2 ADC1 VOUT1 45
4 8318 C18 C19 C20
ADC0

10U

100N

10U
0805 0603 0805
28/56-BIT, 50 MHz VOUT2 44
E
AUDIO PROCESSOR CORE
VOUT3 43 E
40 ms DELAY MEMORY DGND
3 DGND
ADC_RES
47

ADDR1 /CDATA/WB
FILTA Control
8-CH 8-Bit 8-CH
10U

16V
Interface
Digital Aux GPIO Digital
Reset/ and
Input ADC Output
R9 Mode Selfboot
W125

C23 C24 Select


17K8
100N
10V

0805 0603
0805
F Input/Output Matrix F

CLATCH/WP
30
5 RESETB

MP10
SELFBOOT

MP11
SDA/COUT
SCL/CCLK
RSVD

ADDR0

MP1
MP0
MP4
MP5

MP9
MP2
MP3
MP8

MP6
MP7
+3V3_DSP
HORN+~ +3V3_DSP
DGND R126 WOOFER+~

W125
64K9 D43
6

7
20
21
22
23

10
11
8
9

26
29
28
27

15
14
16
19
LQFP-48 R124

W125
0805 D1005
64K9 D41
CDSF4148 0805 D1005
/RESET_DSP CDSF4148
/RESET_DSP

50V
G R127 G

W125

50V
3K92 C129 D44 R125

W125
47P
0805 0805 D1005 3K92 C128 D42
R11 CDSF4148

47P
0805 0805
R12 D1005
W125

47R
W125 DAC_LRCLK CDSF4148
DGND 0805 47R
0805
SPI_MOSI R13
SS_DSP ADOUT W125 DAC_BCLK DGND
SPI_MISO DGND
H SPI_MISO 47R H
SPI_CLK 0805
SPI_CLK
R14 +3V3_DSP
W125 DAC_DATA +88V~
47R R18

W125
0805 64K9 D39
0805 D1005
CDSF4148

50V
I 6 1 I
10 W3:6 W3:1 10 R66

W125
+88VSense 3K92 C127 D40

47P
7 2 0805 0805 D1005
10 W3:7 W3:2 10
CDSF4148
8 3
10 W3:8 W3:3 10

9 4 DGND
10 W3:9 W3:4 10
Input PCB Power Supply PCB
J J
6 +HiV_S 6 10 5
10 W3:10 10
5 HORN+_S 5 W3:5
4 WOOFER+_S 4
3 DGND 3 USBi header
2 WOOF_CLK 2
DGND Section: ADC/DSP
1 +24vIN 1 Insert only on prototypes. Product(s): EF10P-EF12P-EF15P
K _W7 _W7_ PCB#: M1802 Rev#: V01 EML Rev#: 01 Sheet 4 Of 11 K
Modified: 2020-03-17 File: DSP.SCHDOC Tmp Rev: V031
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

+3V3_uC +3V3
A VREFH R194 A
W250 600R
Mode_B

10V

10V
P1:1 1R0 F0805
L4

10V

16V

10V

16V

16V
1206
B LIN Mode_G

T
10K C140 C27 C29 C28 C30 C26 C31 Mode_R

10U

10U
0805 0805
.

10U

100N

10U

100N

100N

NetQ10_3
0805 0603 0805 0603 0603
4459 R137

16V
R128 R129 R130 R131 R132 R133

W125

W125

W125

W125

W125

W125
W125
3K32 3K32 3K32 3K32 3K32 3K32

16V
C32 1K02 0805 0805 0805 0805 0805 0805

100N
B 0603 0805 DNS DNS DNS B

B
C33 DGND U3 D Q9

100N
0603 LQFP64 D Q10 D Q11
MKL15Z64VLH4 2N7002 2N7002

MASTER
8173 G 2N7002
7986 G

VDD 30
48
R17 7986 G

W100
R15 7986

VDD 3

W100
SOT-23
VREFL 100R S . SOT-23 R16

W100
100R S . S SOT-23
.
P1:2

VDD
0805
0805 100R
B LIN
DGND 1 PTE0 R134 R135 0805
R136
10K
. 2 W100 W100 W100
C ClipIn PTE1 C
4459 64 LimitLED 10K0 10K0 10K0
ClipIn PTD7 LimitLED 0805 0805 Switch_Gnd
+15V LimitIn 63 ClipLED 0805
LimitIn PTD6 ClipLED
5 PTE16 PTD5 62
6 PTE17 PTD4 61 DGND
R19 R20
W125

W125

1K800 1K800 7 60
PTE18 PTD3
0805 0805
PTD2 59
BT_Switch
8 PTE19 PTD1 58
D Mode_Switch D
9 57
PTE20 PTD0 Sub_Switch
50V

N3 10 PTE21
D6 11 PTE22 PTC11 56
C34 5V1 U14 +3V3_uC N4 12 55
100N

0805
SOT-23 PTE23 PTC10
1 CS VCC 8 20 PTE24 PTC9 54 SPI_MISO
+3V3_uC RESET_DAC

DNS
2 7 21 53 R21
SO HOLD PTE25 PTC8 RESET_DSP W125 SPI_MOSI
3 WP SCK 6 17 PTE29 PTC7 52
47R R22
E DGND 4 GND SI 5 18 PTE30 PTC6 51 0805 E
U4 19 50 W125 SPI_CLK
5

U20 PTE31 PTC5 47R


5

VCC 6694 PTC4 49 0805


1 VCC AT25010B SS_DSP
D SO8 23 PTA1 PTC3 46
4 1 SS_DAC
Q SOT753
2 4 D 24 45
CP Q SOT753 DGND R23 PTA2 PTC2
2 26 PTA4 PTC1 44
7019 GND 74LVC1G80 CP W100
27 43
7019 GND
384kHz 475R0 R24 PTA5 PTC0
3

F
0805 28 PTA12 F
3

W100
475R0 29 PTA13 PTB19 42
R25 R26
74LVC1G80 0805 32 41
1 MCLK W125 PTA18 PTB18 W125 BT_UART_RX
+3V3 10 W4:1 47R 33 PTA19 PTB17 40 47R
4
W125

10 W4:4 0805 39 0805


R147

47R PTB16 BT_UART_TX


0805 22 38
W5
W5_ SWD_CLK/PTA0 PTB3 /RESET_BLE
25 SWD_DIO/PTA3 PTB2 37
1 +3V3_uC R27 +88VS
VCC +3V3_uC 36 +88VSense
G 2 SWD_DIO 2 VREFH W100 PTB1 N6 G
DIO N40 10 W4:2 35
3 RESET_b 100R PTB0
RST
4 SWD_CLK
N41
+3V3_uC 0805 14 VREFH N1 N2 Connect N1 & N2 for I2C when using USBi
N42 15 34

13 VDDA
CLK

VSSA
X1 VREFL RESET_b

16V
DGND

4 VSS
VSS
47 VSS
GND 5 N43
6 3 10 W4:3
SWO
SWO C35
N44 100N 0603 DGND

31

16
5 +3V3_uC

H
96kHz MicroPgm 10 W4:5
6 10 W4:6
H

16V

10V
WOOF_CLK X2 7
10 VREFL 10 W4:7
10 W4:10 C37
DGND 8 C36

100N
0603

10U
10 W4:8 0805

9 10 W4:9

I R45 I
50V 47P
W125
2K2 0805
C50 DGND
0805
L8
DGND
SS 2

SYNC 3
6 GND FB 4

C54 +3V3
L9 2.2UH N7
CB 1
5 ON/OFF

R156 7730
7 10N 50V
J +24vIN W250 VIN J
VSW 8
0805
22R
120uH
35V

10V

1206
SO8 U5
10V

C55 2910 C56


1206

6032 LM2671 3528


D24
15U

100U

7890 403D Section: Microcontroller


10U

MBRA340T3 C57
Product(s): EF10P-EF12P-EF15P
K PCB#: M1802 Rev#: V01 EML Rev#: 01 Sheet 5 Of 11 K
DGND Modified: 2020-03-17 File: Microcontroller.SchDoc Tmp Rev: V031
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
1 2 3 4 5 6 7 8 9 10 11

A A

Low Energy Bluetooth


B B

W1 W1_ U1
VCC
1 +3V3_BLE 21
P0.4 P3.2
8
DIO
2 P0.6 N8 24
P0.6 P3.3
7
C RST
3 XRES N9 23
P0.7
14X19mm SMT Module 6 C
4 P0.7 N10 22 CYBLE-012011-00 P3.4 5
CLK P0.5 6793 P3.5
5 N11 4
GND P3.6
6 20 3
SWO 6 P1.0 P3.7
SWO P1.4 19 2
BT_Pgm
BLE_UART_RX P1.4 P4.0
P1.5 18 30
R1 P1.5 P5.0
17 31
BLE_UART_TX W125 P1.6 P5.1
D 47R 16 14 D
P1.7 P2.0
0805 13
P2.2
1 12
/BLE_RESET XRES P2.3
11
P2.4
9

VDDR
VREF
P2.6

GND
GND
GND
GND
VDD
E E

28
27
26
25
15
29
10
+3V3
L1
+3V3_BLE 600R
F0805

F F
C4 C3
C2 C1

0603

1206
100N 25V

0603

1206
16V 1U 100N 25V
16V 1U
D_GND

G G

Section: Low Energy Bluetooth


Product(s): EF10P-EF12P-EF15P
H PCB#: M1802 Rev#: V01 EML Rev#: 01 Sheet 6 Of 11 H
Modified: 2020-03-17 File: BLE.SchDoc Tmp Rev: V031
1 2 3 4 5 6 7 8 9 10 11
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

A A

Input PCB Power Supply PCB


8 HORN_PRE_GND 8
7 HORN_PRE_OUT 7
6 WOOFER_PRE_GND 6
5 WOOFER_PRE_OUT 5
B 4 DGND 4 B
3
2
Ph+24v
+15V
3
2
HORN OUTPUT
1 -15V 1
C113
20k rolloff
_W6 _W6_
1N5 50V R108
0805 W100
R110
C 4K75 C
W125 0805
1K800 C115
0805
U12:2
+15V_5 U15 MC33079D 680P 50V
+5V IOUTL+ 6 - 0805
7668 C117
REF

R112 U13:1
IN OUT 7 R114
N12 W100 MC33078
100N 50V
50V

7918 5 4K75 W100


2
SO14 0805
- 7817

16V

10V

50V
0805 200R0
D LM1117-5v + D
C102 0805
SOT-223 1
100N

0805
C103 C104 C119 HORN_PRE_OUT

100N

10U

4N7
0603 1206 0805
R116 3
+ SO8
C121 C122
10V
W100
R118
200R0 C125
W100
DGND C105 1N5 50V 100N 50V 0805
4K75
10U
1206 0805 0805
0805
DGND R120 680P 50V
E +5V W125
0805 E
DAC_LRCLK 1K800 R122
VCOML 22

VCOMR 21

VCC1 23
DAC_BCLK 0805
U12:1 W100 HORN_PRE_GND

16V

10V
4K75
DAC_DATA MC33079D 0805
4 IOUTL- 2
R104 LRCK C106 C107 - 7668

100N

10U
W100
6 BCK VCC2L 28
0603 1206
1
10K0 R105 5 DATA AGND3L 27
0805 W100 3 SO14
F
10K0
+ F
0805
14 RST IOUTL- 26
IOUTL-
RESET_DAC U16 25 IOUTL+ DGND
R106 IOUTL+
DGND SPI_MISO
47R
W125
13
11
MDO
MDI
8122
PCM1796
WOOFER OUTPUT
SSOP-28
0805 12
MC IOUTR-
18 IOUTR-
SPI_MOSI
10 MS IOUTR+ 17
IOUTR+ C114
SPI_CLK
G SS_DAC AGND3R 16 G
3 MSEL 15N 50V
16V

10V
0805
R109
VCC2R 15 C108 C109 DGND R111 W100
15K0
100N

10U
0603 1206 W125
DGND 1 ZEROL 1K800
0805
AGND2
19 AGND1

C116
8 DGND

2 ZEROR 0805
U12:3
20 IREF
9 VDD
7 SCK

+5V MC33079D 680P 50V


IOUTR+ 9 - 7668 C118 0805
H R113 H
24

8 W100 U13:2
10U 16V R115
MCLK +3V3_uC 4K75 MC33078
L10 10 SO14 0805 W100
6
+3V3_DAC + 0805
- 7817

50V
200R0
50V

600R 0805
7
16V

10V

F0805
C120 WOOFER_PRE_OUT
C110

4N7
R107 0805
W100

5
15P

0603 C111 10K0 C112 R117 + SO8


100N

10U

0603 1206
0805
C123 C124 W100
R119 200R0
I I
W100 0805
C126
15N 50V 10U 16V
0805 0805 4K75
+15V 0805
680P 50V
R154 DGND R121
W125
+15V_4 W125
0805
R123
50V

47R U12:5 1K800


U13:3 0805 0805
U12:4
W100 WOOFER_PRE_GND
15K0
8 MC33078 C52 4 MC33079D MC33079D 0805
100N

0805
7817 IOUTR-
50V

7668 13 -
50V

J V+ V+ 7668 J
C150 C97 14
100N

0805
V-
100N

0805
V- SO14
50V

SO8 12 SO14

4 11 +
C96 Section: DAC Output
100N

0805
R155 DGND
W125
-15V_4 DGND Product(s): EF10P-EF12P-EF15P
K 47R PCB#: M1802 Rev#: V01 EML Rev#: 01 Sheet 7 Of 11 K
-15V 0805

Modified: 2020-03-17 File: Output.SchDoc Tmp Rev: V031


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

DESIGN HISTORY AND INFORMATION


A A

B B

CHANGE HISTORY POTENTIOMETERS AND KNOBS


POTENTIOMETERS AND KNOBS
REF FUNCTION POT# KNOB#
# DATE VER# PC# DESCRIPTION OF CHANGE P1 MASTER LEVEL 4434 8653
C C
1 2017/03/03 V01 . RELEASED FOR PRODUCTION P2 LINE LEVEL 4432 8653
2 2017/09/15 V01 9116 MARKED W3 CONNECTOR - YS PART# 4018 AS DNS P3 MIC LEVEL 4432 8653
3 2017/11/14 V01 . CHANGE FUSE PART NUMBER FOR CE FROM 2475 TO 2473 (T1.6A) . . . .
4 2017/10/03 V02p1 9098 Change RCA to 1/8". Move mixer switch to make room for Master pot center mark. . . . .
5 2018-02-24 V01P0 . BOARD BLANK AND PROJECT RENAMED P8802. SECTIONS NAMED M1802 (INPUT), . . . .
6 . . . M1803 (POWER SUPPPLY) AND M1804 (AC FILTER) . . . .
D
7 . . . Added a 0.4A fuse in series with -15v supply track followed . . . . D
8 . . . by a 20V 3W zener to ground to protect if -80v shorts to -15v. . . . .
9 2018-04-20 V01P1 . Part additions for safety and value modifications to reduce parts count. . . . .
"STYLE_P32"
10 2018-09-10 . . Unpanelized P8802 into M1802, M1803, and M1804 . . . .
11 2018-10-12 V01 . Released M1802V01 . . . .
12 2019-02-19 . 9333 Change pots P1, P2 (10K, #4434), and P3 (10K, #4432) to YS #4459 (10K) . . . .
13 2019-10-08 . 9434 Update labels on W6 and W7 connector pinout drawings.
E E

# DATE VER# PC# DESCRIPTION OF CHANGE


1 2019-10-09 . 9445 Remove R129, R131, R133 in LD2 drive circuit
2 . . . .
3 . . . .
4 . . . .
F 5 . . . . F

6 . . . .
7 . . . .
8 . . . .
9 . . . .
10 . . . .
11 . . . .
G
12 . . . . PINOUT DIAGRAMS G

13 . . . .

# DATE VER# PC# DESCRIPTION OF CHANGE


1 . . . .
2 . . . .
H H
3 . . . .
4 . . . .
5 . . . .
6 . . . .
7 . . . .
8 . . . .
I
9 . . . . I
10 . . . .
11 . . . .
12 . . . .
13 . . . .

J J

Section: Design Information And History


K THIS SHEET CONTAINS A CHANGE HISTORY LOG, A LIST OF THE POTS & KNOBS AND A LEADS & PINS REFERENCE SECTION. Product(s): EF10P-EF12P-EF15P K
PCB#: M1802 Rev#: V01 EML Rev#: 01 Sheet 10 Of 11
Modified: 2020-03-17 File: History.SchDoc Tmp Rev: V031
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
M1802V01
C82 R68

R65
47P

R72
C83
R71
C81 C80

C85
10K00 1K02 U8 D31
R67

10K00
47P
10K00
4148
1K02

470P

R73
R74

681R
MC33078

7K50

22U
22U
4148 R153
J3 47P
R138 D32 47R

10K00
C84 R69 30K0 4K75

R75
C77
J4

100N
100N
TIP 47R R152
C76
P2
E

TIP-SW
4459

LINE IN
4090
4218

RING
LINE IN
10K

D36
E
V
R

D35
E
R 7 E

LINE
9

SMAJ150CA
L
8
7 S 10K0 C142

R86 R89
RING-SW R78 R77

C86 R81
R88 10K00 R91

10K00
10K00
10K00
10K0
10U

470P
MC33078 10K0
R94 U11
+

2K74
R64

2K74

4148

D37
33U 4148 10K0
U10 R90

C88
64K9
33U U9 MC33078

C147
4148 D38
C67 10K0 R80

R95 R98
6543 +

680P

2K74
470P
C69 C148
R60 MC33078
R92 100N

10K0
475R0 475R0 47R

47P
68N
100N

20K5
R51

R93 C87
C59 C70 R151
475R0 475R0 C93
680P 47R

MIC

R160
470P

100N

DNS
C91
R150

C90

R210
2K74

30K0

J5
2
4U7
1K02
C92

22U

R100
R101 C71

R99
C95
R102 4459

C94 R103

R213
3
R97
4010 D25

R96
1K02

619R0
619R0
C89
C68

MIC IN
2N7 10K

R58

R211
4148
R57

1
MixerEnable P3
1K02
1K800 R84 R85

R212
619R0
619R0
1K02 NCL NCR 1K02 330R0
1K800

R52
R55
C149

S/N LABEL

R48

C64
470P
2N7
4148 D27 CL CR 1K02 330R0
1U 3522
100N R83 R82

1M
1M
NOR

C58
NOL R76

U7
+

C2

470P
NC
R209 100R 10K00 1K02

R59
S4

475R0
475R0
C60

MC33078
R217 100R

R50
10K00 3696

K1
4148

MC33078
100N

R49 U6 R47
R215 100R 47R R149

C1
NO
D34

100N
100N
100N

C144
R216 100R 47P 100N 47R R148
7837

Q8
4148

C143
15K0
1M C22 C61
R202 1M 18V0
D26 R143 LD4

17K8
1M

R70

R54
R142

10K0
Clip D33
J1 C66
R137

R214
R63 200R 10U P1
1K02

M1802V01
Yorkville

EF10P-EF12P-EF15P
Input/Processing
R10 200R

C32

562R0
4090 LD1

C65
C 2018

100N
Limit R53 5N6 4459
R56
C78 470P 1K62 8K25 470P
10K

MAIN INPUT
3K92
1K50
1K50
1K02
SMAJ150CA R200

R183 R181
R185 R182
MASTER

1K50
47R

100R

R134
1K50
100R
Q9 C5

Q10
D28 R129

MC33079D
R17 C100 470P 470P R199 47R

100N
DNS

100N
C141

C74

10K0
7986

100R
R128 U17 1K50

C102
R157 47R
LM1117-5v 3K32 R130
R187

100N
1K50
1K50

100R
1K50

100R

LD2
J2 3K32

R178 R176
R177 R175
R131 R193

R180
R192
R155

R188
R179
U15

7986

10K0

100R
C63

47R
47R
DNS

R15
R154
DNS C21
NCL NCR NCL NCR NCL NCR

7986

10K0

R135
100R
3K32
CL CR CL CR CL CR
3439 3522 3439

Sub

10U
Q11 C98

R16
4140 100N

R132

R196
R136
NOL NOR NOL NOR NOL NOR

R133
10U

C99

THRU
S1 S2 S3

D4
30K0

4148
Mode C101 C132
BlueTooth
C105 C107 R189 C96 C97
C106 2N7 100N C114 C113
R8 30K0 R104 L12 4K75 R186 100N
10U

C138

R107
10U R111 R110

C137
R61 15K0 4K75 100N 100P
R62 C112 4K75 R184 15N 1N5

R21
R22
10U C79 100P 1K800 1K800
7701 7701

R105
Q3

C104 C103
100U

10K0
10K0
Q7

10U
2N7
C72
600R

47R
47R
R198 U3 15P

100N
R195

C139

10U
22R

C136
10R 10R L10 C110 100N
100N

100N
100N C29 600R
C111
C62

100P
100P

R197 30K0

10K0

PCM1796

100N

10U

C27
C31
R7 10K0 C26 C133 10U C73
MC33079D

C134 10U AK5572


C33 100N 10U
U16 C108 100N
MKL15Z64VLH4 C135
U12

R26
C37 100N 100N 1K800 1K800

10U
10U
R14

47R
47R10U U19

C25
R13
C75 R106

C35
15N

C36
47R
C109 R9 R158 10U 1N5
1R0 R194 C23

100N

10U
C14 47R 4K75 100N
10U 4K75 10U

N1
47R
47R
R11
10U C140 C12
100R 10U
17K8
100N
600R L4 R121 R120
4K75
4N7

R27 47R

100N
4K75

Q1

100N
100N
100N
4N7

C118 C123 C121

7837
C24
4K75

200R0
200R0

15K0

1K02
10U R25 R119 C124 R118 C122
N2 C9
DNS C28 680P 680P C117
200R0

15K0

100N
10U 4K75

C30
AT25010B
200R0

10U
MicroPgm
R117
R123
R116
R122

C7 R3
100N

C6
U14
100N
680P

MC33078 C18 C126 C125


ADAU1401
680P
R108 R112
R114 C119

C19
10U

10U

1
6
100N

U2 C10 C8 U13
47R
100N
C20 R109 R113
C116 R115 C120

475R0
475R0
1 100N C11
C115

+
W5_ 3N3 4148
100N
7
R5

2
C13
475R0

W3
D6 100R 100N
22U

R12

47P C131

R23
47P

R24
74LVC1G80
8

3 600R

BT_Pgm
5V1 3K92

100N
U20 4148
+

W1 C34
U1 Q2
9

12.288 3K92
C52
4148
4148

1K800
1K800
DNS

47R
5

47P C130
10
4148

74LVC1G80
22U

L3 C16 D42 C150


R2

U4 4148 C15 C128 C127


CYBLE-012011-00
600R 220N
C3
L2 R125 D40

C4
R147
C56 3K92
R19
C54

C57 C17 L9
R20

R66
64K9
64K9
64K9

1U
C129
D41

100N
120uH
R124 D44
10N

10U
100U

47R R1 L8 R127
2.2UH
C55
R18 D39

CYBLE-012011-00
2K2
15U

LM2671 22R
C1
R45
MBRA340

1U

600R 47P
100N C50
L1 U5 D24
C2
R156
-15V
+15V
Ph+24v
DGND
WOOFER_PRE_OUT
WOOFER_PRE_GND R126 D43
HORN_PRE_OUT
HORN_PRE_GND

+24vIN
WOOF_CLK
DGND
WOOFER+_S
HORN+_S
+HiV_S

1 1
W7 1 2327 6 W6 1 2328 8
E
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

PCB ASSEMBLY DOCUMENTATION


A A

B B

SPECIAL PRODUCTION NOTES PCB HARDWARE

SCREWS AND BOLTS NUTS STANDOFFS MISCELLANEOUS

C C

The input section needs to be air tight. All Vias and Part Holes must be filled with solder.

D D

E E

F F

G G

H H

I I

J J

Section: Assembly Documentation


K
Product(s): EF10P-EF12P-EF15P K
THIS SHEET CONTAINS SPECIAL PRODUCTION NOTES AND A LIST OF PCB HARDWARE PARTS REQUIRED FOR THE BUILD. PCB#: M1802 Rev#: V01 EML Rev#: 01 Sheet 9 Of 11
Modified: 2020-03-17 File: Assembly.SchDoc Tmp Rev: V031
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

DESIGN HISTORY AND INFORMATION


A A

B B

CHANGE HISTORY POTENTIOMETERS AND KNOBS


POTENTIOMETERS AND KNOBS
REF FUNCTION POT# KNOB#
# DATE VER# PC# DESCRIPTION OF CHANGE P1 MASTER LEVEL 4434 8653
C C
1 2017/03/03 V01 . RELEASED FOR PRODUCTION P2 LINE LEVEL 4432 8653
2 2017/09/15 V01 9116 MARKED W3 CONNECTOR - YS PART# 4018 AS DNS P3 MIC LEVEL 4432 8653
3 2017/11/14 V01 . CHANGE FUSE PART NUMBER FOR CE FROM 2475 TO 2473 (T1.6A) . . . .
4 2017/10/03 V02p1 9098 Change RCA to 1/8". Move mixer switch to make room for Master pot center mark. . . . .
5 2018-02-24 V01P0 . BOARD BLANK AND PROJECT RENAMED P8802. SECTIONS NAMED M1802 (INPUT), . . . .
6 . . . M1803 (POWER SUPPPLY) AND M1804 (AC FILTER) . . . .
D
7 . . . Added a 0.4A fuse in series with -15v supply track followed . . . . D
8 . . . by a 20V 3W zener to ground to protect if -80v shorts to -15v. . . . .
9 2018-04-20 V01P1 . Part additions for safety and value modifications to reduce parts count. . . . .
"STYLE_P32"
10 2018-09-10 . . Unpanelized P8802 into M1802, M1803, and M1804 . . . .
11 2018-10-12 V01 . Released M1802V01 . . . .
12 2019-02-19 . 9333 Change pots P1, P2 (10K, #4434), and P3 (10K, #4432) to YS #4459 (10K) . . . .
13 2019-10-08 . 9434 Update labels on W6 and W7 connector pinout drawings.
E E

# DATE VER# PC# DESCRIPTION OF CHANGE


1 2019-10-09 . 9445 Remove R129, R131, R133 in LD2 drive circuit
2 . . . .
3 . . . .
4 . . . .
F 5 . . . . F

6 . . . .
7 . . . .
8 . . . .
9 . . . .
10 . . . .
11 . . . .
G
12 . . . . PINOUT DIAGRAMS G

13 . . . .

# DATE VER# PC# DESCRIPTION OF CHANGE


1 . . . .
2 . . . .
H H
3 . . . .
4 . . . .
5 . . . .
6 . . . .
7 . . . .
8 . . . .
I
9 . . . . I
10 . . . .
11 . . . .
12 . . . .
13 . . . .

J J

Section: Design Information And History


K THIS SHEET CONTAINS A CHANGE HISTORY LOG, A LIST OF THE POTS & KNOBS AND A LEADS & PINS REFERENCE SECTION. Product(s): EF10P-EF12P-EF15P K
PCB#: M1802 Rev#: V01 EML Rev#: 01 Sheet 10 Of 11
Modified: 2020-03-17 File: History.SchDoc Tmp Rev: V031
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

Input PCB Power Supply PCB


8 LO- 8
A 7 LO+ 7 A
6 HI- 6
5 HI+ 5
4 D_GND_ 4
3 D_GND_ 3
2 +15V_ 2
1 -15V_ 1 HI- HI-
26 W2:1
R144 R244 R245
_W6 3036 Cable _W6_
W7_:6 6
6 +88V_S W125 W125 W100
+88V
HI+ HI+
17K8 17K8 20K5 26 W2:2
R145 R246 R247
B 4 WOOFER+_S 0805 0805 0805
B
3044 Cable Power Supply PCB
W7_:4 6 W125 W125 W100 MUTE MUTE
26 W2:3
Input PCB 17K8 R146 17K8 R248 20K5 R249
6 +88V_S 6 5 HORN+_S 0805 0805 0805
W7_:5 6 W125 W125 W100 -15v_ -15V_
26 W2:4
5 WOOFER+_S 5 17K8 17K8 20K5
4 HORN+_S 4 0805 0805 0805
-88V -88V
26 W2:5
3 D_GND_ 3
DSP Output
2 96KHZ 2 R241

W125
Output.SchDoc R242 +24v

W125
DSP.SCHDOC +24V
1 +24V_ 1 64K9 64K9 26 W2:6
0805
0805 D1
_W7 _W7_
D1005 -24V -24V
R243 CDSF4148 26 W2:7

W125
+88V~
WOOFER+~
HORN+~
64K9
C Preamp A/D 0805 LVGND_ LVGND_ C
26 W2:8
Preamp.SchDoc ADC.SchDoc D2
DAC_DATA DAC_DATA D1005 -44V -44V
26 W2:9
CDSF4148

-15v_
AIN_HI_SENS+ AIN_HI_SENS+
DAC_BCLK DAC_BCLK 2 +15V_
AIN_HI_SENS- AIN_HI_SENS- W6_:2 8 +15V_ +15V_
DAC_LRCLK DAC_LRCLK 26 W2:10
AD_Ref AD_Ref
AIN_LO_SENS+ AIN_LO_SENS+ 7 HI+ F1 D5 LO+ LO+
HORN_PRE_OUT W6_:7 8 1 26 W2:11
AIN_LO_SENS- AIN_LO_SENS- 8 HI- W6_:1 8
ADOUT ADOUT HORN_PRE_GND W6_:8 8 Rad .2
2492
DO214AC
GND AD_GND 0A4 LO- LO-
26 W2:12
3SMAJ5932B
Cannot open file E:\My 6 LO-
D
WOOFER_PRE_GND W6_:6 8 20V
D
Documents\AD\M1496\A-D.jpg 5 LO+ 96KHZ 96KHZ
WOOFER_PRE_OUT W6_:5 8 26 W2:13
Ph+24v
-88V
26 W2:14

Power Supply / Speaker Out HIOUT


26 W2:15
POWER SUPPLY.SCHDOC MUTE

/RESET_DSP

RESET_DAC
MUTE
-88V -88V

+88VSense

SPI_MOSI
SPI_MISO

SPI_MOSI
SPI_MISO
26 W2:16

SPI_CLK

SPI_CLK
SS_DAC
LimitSig

SS_DSP
MCLK

MCLK
HORN+ ClassName: AmpOut HIOUT HIOUT
26 W2:17
WOOFER+
LRCLK

LimitSig
MCLK

E WGND WGND E
BCLK
Mode_Switch

26 W2:18
Reset
Switch_Gnd
Sub_Switch
BT_Switch
CH_Gnd

LOOUT
Mode_G
Mode_B

Mode_R

26 W2:19
LimitIn
ClipIn

HORN_PRE_GND_ ClassName: AmpOut


LOOUT
Woofer_PRE_GND_ 26 W2:20

4 LVGND_ +44V +44V


W6_:4 8 LVGND_ 26 W2:21
-24V
-24V
-44V LOOUT LOOUT
-44V 26 W2:22
3 D_GND_ -88V
F
W7_:3 6 D_GND_ -88V F
+44V +24V +24V
+44V 26 W2:23
+24v
1 +24v_ +24V +88V
W7_:1 6 +24v_ 26 W2:24
+88V
+88V
3 +88V +88V
W6_:3 8 PhantomPower 26 W2:25
Microcontroller
+88V
Microcontroller.SchDoc HORN_OUT 26 W2:26
HORN_GND

CH_GND_
ClipIn
LimitIn
+88VSense

RESET_DSP
SPI_MOSI
SPI_MISO
SPI_CLK
SS_DSP

+24vIN

SS_DAC
RESET_DAC
MCLK
WOOFER_OUT
G
WOOFER_GND G

Switch_Gnd
Sub_Switch
BT_Switch C154
Mode_Switch 2 100V 47N WOOF_CLK_
WOOF_CLK W7_:2 6
Mode_R
1206
Mode_G
Mode_B BLE
H H
/RESET_BLE /BLE_RESET
LimitLED
ClipLED

BT_UART_RX BLE_UART_RX CON_HOLE_128


BT_UART_TX BLE_UART_TX
1
D_GND
HC2
BLE.SchDoc

CHGND1
I Connected to CHGND2 through the chassis. I
Use a wire to connect these two
points when working on the bench.

J J

ECO.SchDoc
ECAD INCIDENTAL
Assembly.SchDoc
ASSEMBLY NOTES
Yorkville Sound Ltd. Product(s): EF10P - EF12P - EF15P
550 Granite Court Description: PS and Input
K History.SchDoc Pickering, ON K
DESIGN HISTORY Canada L1W 3Y8 PCB#: M1803 Rev#: V01 EML Rev#: 01 Sheet 1 Of 11
www.yorkville.com Modified: 2018-10-16 File: Top Sheet.SchDoc Tmp Rev: V031
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

Model Transformer
EF15P CH1341U ORN
A EF12P CH1441U A

FEMALE CONNECTOR
EF10P CH1342U
BLK
MUTE ON/OFF
R28 R29 Q4

PIN 1
VIEWED FROM WIRE SIDE BLK/YEL VIO_ W125 W125
FEMALE CONNECTOR
SOT-23 MMBT5401

D8
2K2 1M 7837
PIN 1
VIEWED FROM WIRE SIDE

4U7
0805 0805
CDSF4148

1U
D1005

D9
R30

W100
GRY_ D7 C38 -20V UNMUTE
BLACK C39 10K0

25V
MALE 9 PIN CONNECTOR FOR CDSF4148 Elec

50V
18V0 4.3X3.9 0805
D1005
TRANSFORMER SECONDARYS SOD-323

RED_ MuteGND MUTE


B B
BROWN CH1342U VIO/

a
BLU
1
YEL W8:1 9
BRN D10
+88V
+88V

NC

NC
ORANGE BLK/YEL R228 R227 R46 S3D R219

W100
RED LVGND_
7 GREY/ W100 W100 W250 +24v_ DO-214AB 15K0
W8:7 9 0805
7K50 7K50 22R D11 D13
0805 0805 1206 +44V
GRY +44V
C40 R220

W100
BLUE 7895
D12
S3D S3D 4700U 15K0
C R31 DO-214AB DO-214AB C
3 RED/ +24V 35X40MM 0805
W8:3 9 +24V 100V
VIO 7A S3D
R218

W100
DO-214AB
D14 C41
WHITE D15 3300U 15K0
2 YELLOW C43 18X40MM
0805
W8:2 9 3300U S3D 63V
16X35MM
S3D DO-214AB
DO-214AB 35V
WHT R226 R224 R225

W125

W125

W125
5 64K9 64K9 64K9
W8:5 9 7895 0805 0805 0805

R34 D16 D17


D RED C42 PS_GND D
7A 3300U C44
S3D 16X35MM S3D
W8:6 9
6 GREY DO-214AB
35V DO-214AB
3300U
18X40MM
D18 R223

W100
63V
-24V 15K0
C45 0805
S3D 4700U
DO-214AB D20
4 VIO 35X40MM
W8:4 9 -44V 100V R221

W100
R229 R230
LVGND_ W100 W100
S3D 15K0
DO-214AB D19 0805
7K50 7K50
0805 0805
E 8 S3D R222 E

W100
W8:8 9
DO-214AB 15K0
D21 0805
-88V
-88V
9 S3D
W8:9 9 DO-214AB

ALL DIODES S3D 200V 3A0 DIO D214 SMT


PUT PADS UNDER HIGH CURRENT AND ALTERNATE
F F

a
L6 4.7UH
CRITICAL SAFETY COMPONENTS.
HORN_OUT HORN+
THIS SYMBOL IS PLACED ADJACENT TO HORN_OUT
8283 12.3X6
HORN+

SAFETY CRITICAL COMPONENTS.

100V
C49 ClassName: AmpOut

2N7
0805

WOOFER+
G Q15 G
R204 R205 MJD112 R206 R38
+44V

W250
40-55 VDC-> W250 W250 DPAK-3 W100 PhantomPower 10R
10R 10R 4R7 1206
6817 +
1206 1206 D3
SOT-23
0805
Load - 20mA max. Spkr S5
24V HORN- 4
R207 HORN_GND
50V

4 W12:4
W100 C146 -
R208 +88V
W100
50V

15K0 Q16 4.3X3.9


475R0
1U

0805 C145
4.3X3.9
SOT-23
7838 0805 HORN
3
1U

MMBT3904 ClassName: +Hi 4 W12:3


H D22 SP1 H
L7 S3D
DO-214AB
ClassName: AmpOut
WOOFER_OUT WOOFER+ 2
WOOFER_OUT 4 W12:2
192UH _W1
PHgnd 6562
D23
S3D R42 T810-600G-TR

W125
ClassName: AmpOut DO-214AB 1
HORN-

MT2
30K0 Q5 4 W12:1
CH_GND_

1000V

1000V
R231 R232 R233 R234 R235 0805

D2PAK
Connection to CHGND1 in W100 W100 W100 W100 W100 L11
4K75 4K75 4K75 4K75 4K75 ClassName: -Hi 7915

MT1
I PreAmp through the chassis. PS_GND WOOFER- Input PCB Power Supply PCB
0805 0805 0805 0805 0805 -88V Q6:1
R44 C151 C152 I
8 LO- 8

150P

150P
Use a wire to connect these two R240 R239 R238 R237 R236 TO92 W250 1206 1206
WOOFER

G
7 LO+ 7 -88V W100 W100 W100 W100 W100
points when working on the bench. 10R
6 HI- 6 4K75 4K75 4K75 4K75 4K75 C51
1206
486uH
MuteGND

1000V
5 HI+ 5
0805 0805 0805 0805 0805
RAD POLY MBS4992
5190 8V5
2906
100V
4 D_GND_ 4
4U7 C53 C153
3 D_GND_ 3

150P
HORN_PRE_GND_ 16V 10U 1206
2 +15V_ 2 HC7
1 -15V_ 1 5X5.5mm 1
_W6 _W6_
J
DGND_ WOOFER- CON_HOLE_128
J
D_GND_ WOOFER_GND

Input PCB Power Supply PCB


CHGND4
LVGND_ 6 +88V_S 6
LVGND_
5 WOOFER+_S 5
4 HORN+_S 4
3 D_GND_ 3
Woofer_PRE_GND_ 2 96KHZ 2
1 +24V_ 1 Section: Power Supply
Q6:2
K _W7 _W7_ 1
Product(s): EF10P - EF12P - EF15P K
NC
PCB#: M1803 Rev#: V01 EML Rev#: 01 Sheet 8 Of 11
Modified: 2018-10-16 File: POWER SUPPLY.SCHDOC Tmp Rev: V031
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

DESIGN HISTORY AND INFORMATION


A A

B B

CHANGE HISTORY POTENTIOMETERS AND KNOBS


POTENTIOMETERS AND KNOBS
REF FUNCTION POT# KNOB#
# DATE VER# PC# DESCRIPTION OF CHANGE
C C
1 2017/03/03 V01 . RELEASED FOR PRODUCTION
2 2017/09/15 V01 9116 MARKED W3 CONNECTOR - YS PART# 4018 AS DNS
3 2017/11/14 V01 . CHANGE FUSE PART NUMBER FOR CE FROM 2475 TO 2473 (T1.6A) . . . .
4 2017/10/03 V02p1 9098 Change RCA to 1/8". Move mixer switch to make room for Master pot center mark. . . . .
5 2018-02-24 V01P0 . BOARD BLANK AND PROJECT RENAMED P8802. SECTIONS NAMED M1802 (INPUT), . . . .
6 . . . M1803 (POWER SUPPPLY) AND M1804 (AC FILTER) . . . .
D
7 . . . Added a 0.4A fuse in series with -15v supply track followed . . . . D
8 . . . by a 20V 3W zener to ground to protect if -80v shorts to -15v. . . . .
9 2018-04-20 V01P1 . Part additions for safety and value modifications to reduce parts count. See below. . . . .
10 2018-10-01 . . Unpanelized P8802 into M1802, M1803, and M1804 . . . .
11 2018-10-12 V01 . Released M1803V01 . . . .
12 . . . . . . . .
13 . . . .
E E

# DATE VER# PC# DESCRIPTION OF CHANGE


1 . . . .
2 . . . .
F 3 . . . . F
4 . . . .
5 . . . .
6 . . . .
7 . . . .
8 . . . .
9 . . . .
G 10 . . . . PINOUT DIAGRAMS G

11 . . . .
12 . . . .
13 . . . .

H H
# DATE VER# PC# DESCRIPTION OF CHANGE
1 . . . .
2 . . . .
3 . . . .
4 . . . .
5 . . . .
I I
6 . . . .
7 . . . .
8 . . . .
9 . . . .
10 . . . .
11 . . . .
J 12 . . . . J
13 . . . .

Section: Design Information And History


K THIS SHEET CONTAINS A CHANGE HISTORY LOG, A LIST OF THE POTS & KNOBS AND A LEADS & PINS REFERENCE SECTION. Product(s): EF10P - EF12P - EF15P K
PCB#: M1803 Rev#: V01 EML Rev#: 01 Sheet 10 Of 11
Modified: 2018-10-16 File: History.SchDoc Tmp Rev: V031
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
C53 Q6
5190

10U
ra p
T ie W

10R
30K0
R42

R44
HC7 Spkr WOOF-
WOOF+
C153
HORN-
150P HORN+ C152
150P
L11
7915
R247

1
3538

1
L7 Q5
R145 R246

20K5

17K8 _W1
C51
17K8

R243

WOOFER+
6562
C151

WOOFER-
R241

64K9
150P

486uH
R146 17K8 64K9

4U7/100V
2327

192UH
6

HORN+
5933

HORN-
RT V
17K8 20K5 W12
R249
R248
T ie W
R244 ra p
L6
R144 17K8

17K8 R245
R242
64K9

20K5
1

S3D
C154 R38
7K50 R228

D23

10R

S3D
W7_
1

R227 47N 4.7UH


R46
7K50

R230 R229
22R 2N7
7K50 7K50
C49 D22
LVGND_

+15V_

WGND
-15V_

+24V

LOOUT

LOOUT
-88V
HI+ LO- -88V +88V +88V
W2
6535
96KHZ
-24V

-44V HIOUT +88V


MUTE

LOOUT
HI-

+24V
LO+
EF10P - EF12P - EF15P
-88V

+44V
HIOUT

R240

R231
4K75

4K75
4K75
4K75
4K75
4K75
4K75
4K75
4K75
4K75
M1803 V01.
8

4148 D2 C45
W6_
2328

R232
R239
R238
R237
R236
R235
R234
R233
Power Supply
4148

C40
D1

R219
RTV

15K0 R218

R220

S3D

S3D
D10
RTV

D19
15K0
15K0
5910 5910
1
1

D13

+
+
4700U 4700U RTV
D5
J5932B
100VRTV

+
100V S3D

+
0A4
F1

1
D21
RTV
5860 + C41
S3D 4145
R221 15K0 15K0
C42 RTV TP1 RTV R222
3300U 5670 R223 15K0

W8
RTV 35V RTV AmpBias
3300U RTV Adjust

7
AmpBias
TP2
63V HC2

S3D
1U
1.5mV

C146
RTV +

D17
4R7
4145

9
R206

Q16
C44 C43

475R0 R208

T3904

C145
1U
S3D
D3 RT V RT V

24V
e
5670 5860 Attach Ring Term Here.

+
15K0
R205 D11
R207 10R D8
3300U 3300U 4148 4148 D9

S3D
10R

R225 64K9
R226 64K9
R224 64K9
63V 35V D14

D20
Q15 MJD112 + RTV
+
RTV

R204
S3D

+
4U7

10K0
18V0
1M

1U
2K2
7837
Q4 ESD
7A

R29
R30
D7 R28

C39

7A
C38

R31
Yorkville R34

S3D

S3D

S3D
C 2018 S3D

D18
D16
S/N LABEL D15 D12
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

PCB ASSEMBLY DOCUMENTATION


A A

B B

SPECIAL PRODUCTION NOTES PCB HARDWARE

1. PCBSA: ADD RTV BETWEEN POWER SUPPLY CAPS AS SHOWN SCREWS AND BOLTS NUTS STANDOFFS MISCELLANEOUS
HERE.
C C

D D

E E

F F

G G

H H

I I

J J

Section: Assembly Documentation


K Product(s): EF10P - EF12P - EF15P K
THIS SHEET CONTAINS SPECIAL PRODUCTION NOTES AND A LIST OF PCB HARDWARE PARTS REQUIRED FOR THE BUILD. PCB#: M1803 Rev#: V01 EML Rev#: 01 Sheet 9 Of 11
Modified: 2018-10-16 File: Assembly.SchDoc Tmp Rev: V031
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

DESIGN HISTORY AND INFORMATION


A A

B B

CHANGE HISTORY POTENTIOMETERS AND KNOBS


POTENTIOMETERS AND KNOBS
REF FUNCTION POT# KNOB#
# DATE VER# PC# DESCRIPTION OF CHANGE
C C
1 2017/03/03 V01 . RELEASED FOR PRODUCTION
2 2017/09/15 V01 9116 MARKED W3 CONNECTOR - YS PART# 4018 AS DNS
3 2017/11/14 V01 . CHANGE FUSE PART NUMBER FOR CE FROM 2475 TO 2473 (T1.6A) . . . .
4 2017/10/03 V02p1 9098 Change RCA to 1/8". Move mixer switch to make room for Master pot center mark. . . . .
5 2018-02-24 V01P0 . BOARD BLANK AND PROJECT RENAMED P8802. SECTIONS NAMED M1802 (INPUT), . . . .
6 . . . M1803 (POWER SUPPPLY) AND M1804 (AC FILTER) . . . .
D
7 . . . Added a 0.4A fuse in series with -15v supply track followed . . . . D
8 . . . by a 20V 3W zener to ground to protect if -80v shorts to -15v. . . . .
9 2018-04-20 V01P1 . Part additions for safety and value modifications to reduce parts count. See below. . . . .
10 2018-10-01 . . Unpanelized P8802 into M1802, M1803, and M1804 . . . .
11 2018-10-12 V01 . Released M1803V01 . . . .
12 . . . . . . . .
13 . . . .
E E

# DATE VER# PC# DESCRIPTION OF CHANGE


1 . . . .
2 . . . .
F 3 . . . . F
4 . . . .
5 . . . .
6 . . . .
7 . . . .
8 . . . .
9 . . . .
G 10 . . . . PINOUT DIAGRAMS G

11 . . . .
12 . . . .
13 . . . .

H H
# DATE VER# PC# DESCRIPTION OF CHANGE
1 . . . .
2 . . . .
3 . . . .
4 . . . .
5 . . . .
I I
6 . . . .
7 . . . .
8 . . . .
9 . . . .
10 . . . .
11 . . . .
J 12 . . . . J
13 . . . .

Section: Design Information And History


K THIS SHEET CONTAINS A CHANGE HISTORY LOG, A LIST OF THE POTS & KNOBS AND A LEADS & PINS REFERENCE SECTION. Product(s): EF10P - EF12P - EF15P K
PCB#: M1803 Rev#: V01 EML Rev#: 01 Sheet 10 Of 11
Modified: 2018-10-16 File: History.SchDoc Tmp Rev: V031
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

A A

B B

Model Transformer
C EF15P CH1341U C
ORN
EF12P CH1441U
FEMALE CONNECTOR
EF10P CH1342U
BLK

PIN 1
VIEWED FROM WIRE SIDE BLK/YEL VIO_
FEMALE CONNECTOR

PIN 1
VIEWED FROM WIRE SIDE

a
GRY_
BLACK
D D
RED_

BROWN CH1342U

a
BLU
YEL

a a
BRN

NC

NC
ORANGE BLK/YEL
RED

ClassName: AC

E
BLUE
GRY NA CE E

VIO

WHITE 1 1 6 W9:1
6 W10:1

WHT 2
2 6 W9:2
6 W10:2

a
F F

NA T3.15A (#2475)
W11:1 2
1 AC-BLK1

a LINE LINE 3
6 W10:3
LINE 3
6 W9:3

a a
CE T1.6A (#2473) Power Switch L5

a
IEC_RECT+FUSE
2 1 4 4 6 W9:4
C46 C47 6 W10:4
100N 680N
4 3 250V 250V
'X2' 18MM 1300UH X2 27MM
G S?
6492 G
NEUTRAL NEUTRAL 5 NEUTRAL 5

a a
2 AC-WHT1
W11:2 2 6 W10:5 6 W9:5

a
C48
4N7
HC1 250V 6 6
6 W10:6 6 W9:6
'Y' 10MM
1
CH_GND CON_HOLE_128

H 6 W9:7 H
6 W10:7
CHGND

a
CRITICAL SAFETY COMPONENTS.
THIS SYMBOL IS PLACED ADJACENT TO
SAFETY CRITICAL COMPONENTS.

I I

J J

Section: Power Supply


K
Product(s): EF10P - EF12P - EF15P K
PCB#: M1804 Rev#: V01 EML Rev#: 01 Sheet 8 Of 11
Modified: 2019-09-17 File: POWER SUPPLY.SCHDOC Tmp Rev: V031
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

DESIGN HISTORY AND INFORMATION


A A

B B

CHANGE HISTORY M1804V01 POTENTIOMETERS AND KNOBS


POTENTIOMETERS AND KNOBS
# DATE VER# PC# DESCRIPTION OF CHANGE REF FUNCTION POT# KNOB#

C 1 SEP-02-2018 M1804 was part of P8802. P8802 is now de-panelized into M1802, M1803, M1804 C
2 OCT-12-2018 V01 V01 RELEASED FOR PRODUCTION
3 MAR-12-2019 V01 9277 CHANGED W9 AND W10 FROM 4147 TO 4243
4 Sept-17-2019 . . and changed W11 from 4162 to 4244. . . . .
5 . . . . . . . .
6 . . . . . . . .
7 . . . . . . . .
D 8 . . . . . . . . D

9 . . . . . . . .
10 . . . . . . . .
11 . . . . . . . .
12 . . . . . . . .
13 . . . . . . . .

E E

# DATE VER# PC# DESCRIPTION OF CHANGE


1 . . . .
2 . . . .
3 . . . .
4 . . . .
F 5 . . . . F

6 . . . .
7 . . . .
8 . . . .
9 . . . .
10 . . . .
11 . . . .
G
12 . . . . PINOUT DIAGRAMS G

13 . . . .

# DATE VER# PC# DESCRIPTION OF CHANGE


1 . . . .
H H
2 . . . .
3 . . . .
4 . . . .
5 . . . .
6 . . . .
7 . . . .
I
8 . . . . I
9 . . . .
10 . . . .
11 . . . .
12 . . . .
13 . . . .

J J

Section: Design Information And History


K THIS SHEET CONTAINS A CHANGE HISTORY LOG, A LIST OF THE POTS & KNOBS AND A LEADS & PINS REFERENCE SECTION. Product(s): EF10P - EF12P - EF15P K
PCB#: M1804 Rev#: V01 EML Rev#: 01 Sheet 10 Of 11
Modified: 2019-09-17 File: History.SchDoc Tmp Rev: V031
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
1 2 3 4 5 6 7 8 9 10 11

A A

B B

C C

D D

E DOCUMENTATION E

PLASTICPIN Blank PCB


PCB1
ClassName: PLASTICPIN
F F
RTV_HOLES
ClassName: RTV_HOLES

BREAK
ClassName: BREAKHOLES
G G
CHASSISSCREW
ClassName: CHASSISSCREW
Section:
Product(s): EF10P - EF12P - EF15P
H PCB#: M1804 Rev#: V01 EML Rev#: 01 Sheet 11 Of 11 H
Modified: 2019-09-17 File: ECO.SCHDOC Tmp Rev: V031
1 2 3 4 5 6 7 8 9 10 11
M1804 V01
EF10P - EF12P - EF15P
M1804 V01
Power Supply - AC 240VAC
1

W9
4243

300
1

W10
4243

300
120VAC

5266

C47
RTV RTV

680N/250V

6492 RTV

L5
RTV

1300UH

RTV
5242

C46
4N7/250V
6451
C48

RTV
100N/250V
RTV

W11
1

4244
300
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

DESIGN HISTORY AND INFORMATION


A A

B B

CHANGE HISTORY M1804V01 POTENTIOMETERS AND KNOBS


POTENTIOMETERS AND KNOBS
# DATE VER# PC# DESCRIPTION OF CHANGE REF FUNCTION POT# KNOB#

C 1 SEP-02-2018 M1804 was part of P8802. P8802 is now de-panelized into M1802, M1803, M1804 C
2 OCT-12-2018 V01 V01 RELEASED FOR PRODUCTION
3 MAR-12-2019 V01 9277 CHANGED W9 AND W10 FROM 4147 TO 4243
4 Sept-17-2019 . . and changed W11 from 4162 to 4244. . . . .
5 . . . . . . . .
6 . . . . . . . .
7 . . . . . . . .
D 8 . . . . . . . . D

9 . . . . . . . .
10 . . . . . . . .
11 . . . . . . . .
12 . . . . . . . .
13 . . . . . . . .

E E

# DATE VER# PC# DESCRIPTION OF CHANGE


1 . . . .
2 . . . .
3 . . . .
4 . . . .
F 5 . . . . F

6 . . . .
7 . . . .
8 . . . .
9 . . . .
10 . . . .
11 . . . .
G
12 . . . . PINOUT DIAGRAMS G

13 . . . .

# DATE VER# PC# DESCRIPTION OF CHANGE


1 . . . .
H H
2 . . . .
3 . . . .
4 . . . .
5 . . . .
6 . . . .
7 . . . .
I
8 . . . . I
9 . . . .
10 . . . .
11 . . . .
12 . . . .
13 . . . .

J J

Section: Design Information And History


K THIS SHEET CONTAINS A CHANGE HISTORY LOG, A LIST OF THE POTS & KNOBS AND A LEADS & PINS REFERENCE SECTION. Product(s): EF10P - EF12P - EF15P K
PCB#: M1804 Rev#: V01 EML Rev#: 01 Sheet 10 Of 11
Modified: 2019-09-17 File: History.SchDoc Tmp Rev: V031
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
LINE MIC MASTER
0 Bluetooth
TM

SMART

SUB
Yorkville
in in in 100Hz
Ma Ma Ma

M
x

x
Powered EF-Series
MODE
CLIP LIMIT CLUB
MIXER CONCERT
ENABLE VOCAL
USER

The élite EF-Series powered cabinets include a built in mixer allowing

LIN K
microphones and/or line sources to be used directly. The Link connectors
allow up to 16 EF-Series powered cabinets to be driven from a single source
(a maximum of 3 mixers can be used simultaneously when Linking). To add a
subwoofer to the system a 100 Hz high pass filter can be activated. LINE MIC MAIN IN THRU
Power Switch & Mode LED The switch turns the power On or Off
and the illumination of the Mode LED indicates that unit is on.
Limit LED The amber Limit LED indicates that the cabinet is operating at full power and the limiter(s) are actively reducing the signal level.
Clip LED The red Clip LED indicates that the signal level is excessive and is causing distortion. To reduce clipping, turn down the mixer levels.
Main In/ Thru (Link) Connectors The Main In / Thru (Link) connectors allow powered cabinets to be driven from a single source. You
can Link up to 16 EF-Series powered cabinets! The Main In / Thru (Link) jacks are the correct input to use when using an external mixer.
Note: When operating from weaker signals, use the Line inputs of the first cabinet in the chain. To ensure maximum hum rejection,
the proper balanced cables must be used.
Mixer On/Off This switch turns the internal mixer ‘on’ or ‘off.’ When the Mic or Line inputs are used, this switch must be set to the ‘on’
position. If these inputs are not being used, the mixer should be turned ‘off.’
Line Inputs The Line inputs allow line level sources such as digital media players (lap tops, tablets or smart phones) and CD
players to be connected.
Note: If a microphone is connected to Channel 1 it will have lower gain compared to Channel 2’s Mic input (Phantom power is NOT
available on Channel 1).
Line Control The Line control adjusts the input volume level of devices plugged into the Line input.
Mic Inputs Any standard microphone may be connected to the Mic input. Phantom power is built-in.
Mic Control The Mic control adjusts the volume level for the Mic input.
Master Control This control adjusts the level of the individual cabinet. When Linking multiple cabinets use this control to individually
adjust the relative volumes of each cabinet.
Note: The Master control is designed to be used in the 12 o’clock (middle) position, only minor adjustments are recommended.
Mode Selector The Mode Selector applies specific EQ and tone settings for the EF-Series powered cabinet.
Club: Boosted bass and enhanced highs make this mode ideal for music playback.
Concert: Allows instruments and vocals to be equally and naturally reproduced which is best for live performance.
Vocal: Shaped response specifically for the human voice range ensures vocal intelligibility.
User: Flat by default, can be customized by a user through the Yorkville app with a maximum of five different parametric
equalization points with adjustable boost, cut and Q.
Sub Switch For operation with a subwoofer, this switch shuts off the low frequency boost and filters out signals below 100 Hz.
This only affects the signals to the internal amplifier and does not affect signals going out from the internal mixer, or to signals
passing through the Link connections.
Bluetooth™ Control This control enables or disables the Bluetooth™ connection between a tablet or a smartphone using the Yorkville App.
Pressing this control button for more than 4 seconds resets the EF-Series powered cabinet to factory settings.
Faults and Internal Fuse A blown fuse generally means that excessive mains voltage has been applied or there’s a serious fault with
the unit. Self re-setting thermal switches are built into the power transformer. These will not trip even under the most extreme operating
conditions and are provided only for safety reasons.

To get the full Owner’s Manual please visit our website at


http://www.yorkville.com/manuals/ or, if you need a printed version call 905-837-8777

Printed In
Printed In CANADA
CANADA
QuickStart-EF_P-Series-1v5 • YS#QSTART-EFP
DOC-YS-Green-00-1v0PR02 • January
• July 14, 2014 22, 2020
LINE MIC MASTER
0 Bluetooth
TM

SMART

SUB
Yorkville
in in in 100Hz
Ma Ma Ma

M
x

x
Powered EF-Series
MODE
CLIP LIMIT CLUB
MIXER CONCERT
ENABLE VOCAL
USER

Les enceintes amplifiées de la série élite comprennent un mixeur intégré


permettant de brancher directement les microphones et / ou les sources de

LIN K
niveau ligne. Les connecteurs Link permettent de lier jusqu’à 16 enceintes
amplifiées de la série EF à partir d’une seule source (3 mixeurs au total
peuvent être utilisés simultanément lors de la liaison). Un filtre passe-haut de
LINE MIC MAIN IN THRU
100 Hz peut être activé lorsque vous ajouter un subwoofer au système.
Interrupteur d’Alimentation et DEL de Mode L’interrupteur allume ou éteint
l’appareil et l’illumination de la DEL de mode indique que l’unité est en marche.
DEL Limit La DEL ambrée indique que l’enceinte fonctionne à pleine puissance et que le(s) limiteurs réduisent activement le niveau du signal.
DEL Clip La DEL Clip rouge indique que le niveau du signal est excessif et provoque une distorsion. Pour réduire la distorsion, baissez les niveaux du mixeur.
Entrée Main / Connecteur THRU (LINK) Les connecteurs d’entrée Main et Thru (Link) permettent d’acheminer le signal à des enceintes
additionnelles à partir d’une source unique. Vous pouvez relier jusqu’à 16 enceintes amplifiées de la série EF! Utilisez les prises Link
lorsque le signale qui alimente les enceintes de la série EF provient d’un mixeur externe.
Remarque: Lorsque vous utilisez des signaux moins puissants, utilisez les entrées Ligne de la première enceinte de la chaîne. Pour assurer un
rejet maximum des bourdonnements, les câbles symétriques appropriés doivent être utilisés.
Mixeur On/Off Cet interrupteur active ou désactive le mixeur interne. Lorsque les entrées Mic ou Line sont utilisées, ce commutateur doit être
en position “on.” Si ces entrées ne sont pas utilisées, le mixeur devrait être éteint.
Entrée Ligne (Line) Les entrées “Line” permettent de connecter des sources de niveau ligne telles que des lecteurs multimédias numériques
(ordinateurs portables, tablettes ou téléphones intelligents) et les lecteurs de CD.
Remarque: Un microphone peut être connecté à la prise Combi-Jack du canal 1, mais son gain est inférieur à celui de l’entrée Mic du canal 2
(et l’alimentation en duplex n’est PAS disponible pour l’entrée du canal 1).
Commande Line La commande “Line” ajuste le niveau de volume d’entrée des périphériques branchés dans l’entrée “Line.”
Entrées Mic Tout microphone standard peut être connecté à l’entrée Mic. L’alimentation en duplex est intégrée.
Commande Mic La commande Mic règle le volume de l’entrée Mic.
Commande Master Cette commande ajuste le niveau de l’enceinte amplifiée individuelle. Lorsque vous reliez plusieurs enceintes, utilisez cette
commande pour ajuster individuellement les volumes relatifs de chaque enceinte.
Remarque: La commande Master est conçue pour être utilisée à la position de 12 heures (milieu), seuls des ajustements mineurs sont
recommandés
Sélecteur de Mode Le sélecteur de mode applique des paramètres d’égalisation et de tonalité spécifiques pour l’enceinte amplifiée de la série EF.
Club: Les basses et les aigües rehaussées rendent ce mode idéal pour la lecture de musique.
Concert: Permet aux instruments et aux voix d’être reproduits de manière égale et naturelle, ce qui est idéal pour les performances
live.
Vocal: Réponse en fréquence spécifiquement adaptée pour la voix humaine afin d’assurer l’intelligibilité des voix.
User: Courbe linéaire par défaut, peut être personnalisé grâce à l’application Yorkville avec un maximum de cinq points d’égalisation
paramétriques différents avec boost, coupure et Q réglable.
Commutateur Sub Pour une utilisation avec un subwoofer, le commutateur Sub éteint l’amplification des basses fréquences et filtre les signaux
inférieurs à 100 Hz. Ce commutateur n’affecte que les signaux de l’amplificateur interne et n’affecte pas les signaux sortant du mixeur interne
ou les signaux passant par les connexions Link.
Commande Bluetooth™ Cette commande active ou désactive la connexion Bluetooth ™ entre une tablette ou un smartphone à l’aide de
l’application Yorkville. Appuyez sur ce bouton de commande pendant plus de 4 secondes pour réinitialiser l’enceinte amplifiée de la série EF
aux réglages d’usine.
Défauts et Fusible Interne Un fusible grillé signifie généralement qu’une tension secteur excessive a été appliquée ou qu’il y a un problème
grave avec l’appareil. Des thermorupteurs à réenclenchement automatique sont intégrés au transformateur de puissance. Ceux-ci ne se
déclencheront pas même dans les conditions de fonctionnement les plus extrêmes et ne sont fournis que pour des raisons de sécurité.

Pour obtenir le manuel de utilisateur visitez notre site Web à http://www.yorkville.com/manuals/


ou, si vous avez besoin d’une version imprimée appelez-nous au 905-837-8777
EYEBOLT INSTALLATION
1. DESCRIPTION
Many of the popular models in the Yorkville speaker cabinet line are now equipped with flying
hardware for overhead suspension applications. Depending on the model, two or more internal
braces have been provided for rigging purposes. Each brace contains two bolt holes and provides
center-of-gravity fly-points for use with in-line or angular loads. Many of the models will support
additional suspended cabinets according to their specified working load limits.

IMPORTANT!!
THE RIGGING OF LOUDSPEAKER SYSTEMS IS AN EXTREMELY SERIOUS MATTER. OVERHEAD RIGGING REQUIRES EXTENSIVE
EXPERIENCE, INCLUDING (BUT NOT LIMITED TO) CALCULATING WORKING LOAD LIMITS, HARDWARE INSTALLATION, AND
PERIODIC SAFETY INSPECTION OF ALL HARDWARE AND CABINETRY. IF YOU LACK THESE QUALIFICATIONS, DO NOT ATTEMPT
THE INSTALLATION YOURSELF, BUT INSTEAD USE A PROFESSIONAL STRUCTURAL RIGGER. IMPROPER INSTALLATION CAN
RESULT IN BODILY INJURY OR DEATH. CONSULT A STRUCTURAL ENGINEER TO CALCULATE ADDED LOADS FOR A BUILDING.
STRUCTURAL REINFORCEMENT MAY BE NECESSARY TO INSURE A SAFE INSTALLATION.

2. REQUIRED TOOLS
4.5mm (7/32”) Hex Wrench
Thread lock adhesive (Removable Type)
3. EYEBOLT INSTALLATION
a) Using a 4.5mm (7/32”) hex wrench, remove the flat head bolts from the top or bottom of the speaker enclosure
to expose the tapped holes (on TX models, the flat head bolts are located within the track rails), as shown below.
Be sure to keep these handy as they will be needed to seal the cabinet after the eyebolts are removed.

IMPORTANT!!
USE ONLY LOAD RATED FORGED EYEBOLTS. THESE MAY BE PURCHASED THROUGH YORKVILLE SOUND OR ATM FLY-WARE™.
TO INSURE CABINET-BRACING STRENGTH, MAKE SURE ALL FLY-POINTS ARE SECURED WITH EITHER AN EYEBOLT OR FLAT
HEAD HEX BOLT.

b) Place a drop of thread-lock adhesive on the threads of the eyebolt and insert one into exposed hole. Tighten each
eyebolt by hand until its fits snugly against the cabinet. Further tighten each eyebolt by rotating it another half turn. Be
sure to insert eyebolts in the threaded hole directly in-line with the suspension cable. Always follow the eyebolt
manufacturers installation and use instructions.
c) Suspend each cabinet according to working load calculations and practices recommended by the rigging
hardware manufacturer.

IMPORTANT!!
ON MODELS WITH ONLY TWO TOP SUSPENSION POINTS THE SUPPLIED PULL BACK AT THE REAR OF THE BOTTOM
CENTER PANEL OF THE CABINET IS NOT TO BE USED AS A SUSPENSION POINT. THIS POINT TO BE USED FOR PULL BACK
PURPOSES ONLY.

Remove Flat-Head Bolt and


replace with Forged Shoulder Eyebolt!

DO NOT Remove Flat-Head Bolts


on the Side of Cabinet/s.

4. WORKING LOAD LIMITS


Specified working load limits have been determined for the enclosure as follows:

EF10P 2 Top, 2 Bottom, 2 Each Side, 1 Pullback (bottom) 8 x ¼-20 weight of cabinet only
EF12P+EF15P 2 Top, 2 Bottom, 2 Each Side, 2 Pullback 8 x ¼-20 weight of cabinet only
EF215P 2 Top, 2 Bottom, 2 Each Side, 2 Pullback 8 x ¼-20 weight of cabinet only

IMPORTANT!! READ ALL ENCLOSED INSTRUCTIONS ABOUT PROPER USE OF HARDWARE. TO INSURE PROPER
INSTALLATION, FOR TECHNICAL INFORMATION ON SUSPENSION TECHNIQUES AND EXTERIOR ACCESSORY INFORMATION
WE SUGGEST CALLING ATM FLY-WARES TECHNICAL SERVICES IN THE UNITED STATES AT (310)639-8282 MONDAY THROUGH
FRIDAY FROM 9 AM TO 6 PM (PST) OR FAX AT (310)639-8284. YORKVILLE SOUND MAKES NO CLAIMS AS TO THE SAFETY OF
THE ENCLOSURES IF RECOMMENDED LOAD LIMITS AND HARDWARE ARE NOT STRICTLY ADHERED TO. NOR DOES IT MAKE
ANY SAFETY CLAIMS TO THE RESULTANT INSTALLATION.

IMPORTANT!! TRACK RAILINGS: UNITS THAT INCORPORATE THE TRACK RAILING SYSTEM HAVE THE SAME WORKING LOAD
LIMITS AS THEY DO WHEN THEY ARE USED WITH EYEBOLTS. THESE RATINGS MAY BE LIMITED AND BASED ON THE RATINGS
OF THE TRACK FITTINGS THEMSELVES. PLEASE ENSURE THAT THE RATING OF THE CERTIFIED TRACK FITTINGS EXCEEDS
NECESSARY WORKING LOAD LIMITS.

DOC-flyware-EF__P-00-1v1 • November 18/2019


EYEBOLT INSTALLATION
1. DESCRIPTION
Plusieurs des modèles populaires de la ligne d'enceinte à haut-parleur Yorkville sont maintenant
équipés de quincaillerie de montage pour les applications requérant une suspension aérienne.
Dépendamment du modèle, deux ou plusieurs attaches internes sont prévues pour de tels
montages. Chaque attache contient deux trous de boulon et offre des points de montage centre de
gravité pour utilisation avec charges droites ou anguleuses. Plusieurs des modèles permettent la
suspension de cabinets additionnels selon leur limite de charge de travail spécifique.
IMPORTANT!! LE MONTAGE DE SYSTÈME DE HAUT-PARLEUR EST UNE AFFAIRE TRÈS SÉRIEUSE. LES MONTAGES
IMPLIQUANT UNE SUSPENSION AÉRIENNE NÉCESSITENT UNE CONNAISSANCE APPROFONDIE, INCLUANT (MAIS NON-LIMITÉE)
AU CALCUL DES LIMITES DE CHARGE DE TRAVAIL, LA QUINCAILLERIE D'INSTALLATION, ET INSPECTIONS PÉRIODIQUES DE
SÉCURITÉ DE TOUTE LA QUINCAILLERIE ET DE L'ÉBÉNISTERIE. SI VOUS N'AVEZ PAS CES QUALIFICATIONS, NE TENTEZ PAS DE
FAIRE VOUS-MÊME L'INSTALLATION, AYEZ PLUTÔT RECOURS À UN PROFESSIONNEL DU DOMAINE. UNE INSTALLATION
INADÉQUATE PEUT CAUSER DES BLESSURES CORPORELLES OU MÊME LA MORT. CONSULTEZ UN INGÉNIEUR EN STRUCTURE
POUR CALCULER LA CHARGES ADDITIONNELLE AJOUTÉE AU BÂTIMENT. UN RENFORCEMENT DE LA STRUCTURE DU
BÂTIMENT POURRAIT ÊTRE NÉCESSAIRE POUR ASSURER UNE INSTALLATION SÛRE.

2. OUTILS REQUIS
Clé Hex 4.5mm (7/32")
Adhésif de verrouillage pour filetage (Type amovible)
3. INSTALLATION DES BOULONS À OEIL
a) À l'aide d'une Clé Hex 4.5mm (7/32"), enlevez le boulon à tête plate du dessus ou du dessous de l'enceinte à
haut-parleur pour découvrir les trous filetés (sur les modèles TX, les boulons à tête plate sont situés à l'intérieur
des quincailleries de montage intégré), tel qu'indiqué ci-dessous.
Assurez-vous de ne pas perdre ces boulons à tête plate. Vous devrez les ré-utiliser pour fermer hermétiquement
le cabinet quand les boulons oeil seront enlevés.
IMPORTANT!! N'UTILISEZ QUE DES BOULONS À OEIL CLASSIFIÉ POUR LES CHARGES REQUISES. VOUS POUVEZ VOUS
LES PROCURER DE YORKVILLE SOUND OU ATM FLYWARE ™. POUR PRÉSERVER UNE FORCE MAXIMALE DE
L'ENTRETOISEMENT DU CABINET, ASSUREZ-VOUS QUE TOUS LES POINTS DE SUSPENSION SONT FIXÉS SOLIDEMENT AVEC
SOIT UN BOULON À ŒIL, SOIT UN BOULON HEX À TÊTE PLATE

b) Placez une goutte d'adhésif de verrouillage sur le filetage du boulon à oeil et placez-en une dans le trou exposé.
Resserrez chaque boulon à oeil à la main jusqu'à ce qu'ils soient bien serrés contre l'enceinte. Serrez encore
chaque boulon à œil en les tournant un autre demi-tour.
Assurez-vous d'insérer les boulons à oeil dans les trous filetés directement en ligne avec le câble de suspension.
Toujours suivre les instructions d'installation et d'utilisation du fabricant des boulons à oeil.
c) Suspendez chaque enceinte selon le calcul de charge de travail et les pratiques recommandées par le
fabricant de la quincaillerie de montage.
IMPORTANT!! LES MODÈLES ÉQUIPÉS DE SEULEMENT DEUX POINT DE SUSPENSION SUR LE DESSUS, SONT DOTÉ D'UN
POINT DE TIRE À L'ARRIÈRE SUR LE PANNEAU CENTRAL DU BAS. CE POINT DE TIRE NE DOIT PAS ÊTRE UTILISÉ COMME POINT
DE SUSPENSION. CE POINT DE TIRE NE DOIT SEULEMENT ÊTRE UTILISÉ QUE POUR TIRER L'ENCEINTE VERS L'ARRIÈRE..

Enlevez le Boulon à tête plate et


Remplacez-le avec un boulon à oeil forger!

N'enlevez pas les boulons à tête


plate sur le côté de l'enceinte/s

4. LIMITES DE CHARGE DE TRAVAIL


Les limites de charge spécifiées ont été déterminées pour chaque enceinte comme suit:

EF10P 2 Top, 2 Bottom, 2 Each Side, 1 Pullback (bottom) 8 x ¼-20 weight of cabinet only
EF12P+EF15P 2 Top, 2 Bottom, 2 Each Side, 2 Pullback 8 x ¼-20 weight of cabinet only
EF215P 2 Top, 2 Bottom, 2 Each Side, 2 Pullback 8 x ¼-20 weight of cabinet only

IMPORTANT!! LIRE TOUTE LA DOCUMENTATION INCLUSE AU


SUJET DE L'UTILISATION APPROPRIÉ DE LA QUINCAILLERIE. POUR ASSURER UNE BONNE INSTALLATION, POUR OBTENIR
DE L'INFORMATION TECHNIQUE SUR LES DIVERSES TECHNIQUES DE SUSPENSION ET POUR OBTENIR DE L'INFORMATION
SUR LES ACCESOIRES EXTÉRIEURS NOUS VOUS SUGGÉRONS D'APPELER LE SERVICE TECHNIQUE DE ATM FLY-WARE AUX
ETATS-UNIS AU (310)639-8282 DU LUNDI AU VENDREDI DE 9 AM À 6 PM (HSP) OU PAR FAX AU (310)639-8284. YORKVILLE
SOUND NE GARANTIE PAS UNE UTILISATION SÉCURITAIRE DES ENCEINTES SI LES LIMITES DE CHARGE RECOMMANDÉES
NE SONT PAS RESPECTÉES ET SI VOUS N'ADHÉREZ PAS STRICTEMENT À LA LISTE DE QUINCAILLERIE RECOMMANDÉE.

IMPORTANT!! RAILS DE MONTAGE (TRACK RAILLINGS): LES ENCEINTES INCORPORANT LE SYSTEME DE RAIL DE MONTAGE
ONT LES MÊMES LIMITES DE CHARGE DE TRAVAIL QU'ILS SOIENT SUSPENDUS AVEC LE SYSTÈME DE RAIL OU AVEC LES
BOULONS À OEIL. CES VALEURS ASSIGNÉES DE LIMITE DE CHARGE PEUVENT ÊTRES LIMITÉS ET BASÉS SUR LA VALEUR
DE LIMITE DE CHARGE ASSIGNÉE AUX APPAREILLAGES DE RAIL (TRACK FITTINGS) ELLE-MÊMES. ASSUREZ-VOUS S.V.P.
QUE LA VALEUR ASSIGNÉE DE LIMITE CHARGE DE TRAVAIL SUR LES APPAREILLAGES CERTIFIÉS DE RAIL (TRACK FITTINGS)
EXÈDE LES LIMITES NÉCESSAIRES DE CHARGE DE TRAVAIL.
DOC-flyware-EF__P-00-1v1 • November 18/2019
Yorkville Sound
550 Granite Court
Pickering, Ontario
Canada L1W 3Y8

Auto Attend: (905) 837-8550 Fax: (905) 837-8746 www.yorkville.com

Vous aimerez peut-être aussi