Rapport 121112
Rapport 121112
Rapport 121112
RAPPORT ANALYTIQUE
CLIENT:_02918_ 121112 (Page 1)
Plusieurs échantillons de « filaments aéroportés » collectés entre Novembre et Décembre 2012 sur
l'ensemble du territoire français ont été adressés à notre laboratoire, en provenance de Thénioux,
de Saint Clément des Levées, de Saint Martin de Crau et de Malabat (points de collecte localisés sur
la carte de France page 118).
Pour chacun de ces échantillons, deux expériences de désorption thermique directe à Point-de-Curie
ont été conduites à 445°C, d'une part directement et d'autre part avec méthylation « in-situ » (un
processus favorisant la détection des composants polaires éventuellement présents).
Les différents composés organiques engendrés dans cette série de huit expériences ont -chaque fois-
été séparés par chromatographie gaz et identifiés par spectrométrie de masse (GC/MS).
Les données obtenues ont été interprétées et les résultats obtenus sont détaillés dans le présent rapport
analytique.
Il apparaît que ces « filaments aéroportés » sont des polymères organiques complexes, contenant
des composants chimiques de synthèse, comme le démontre le dépistage GC/MS systématique
réalisé sur les nombreux produits de leur décomposition thermique, parmi lesquels figurent plusieurs
molécules couramment rencontrées dans les carburants et lubrifiants de réacteurs d'aviation.
Les quatre échantillons étudiés contiennent plusieurs composés aromatiques toxiques synthétiques
(phthalates) et trois d'entre eux contiennent du DEHP, un représentant de cette famille de produits
chimiques particulièrement redouté à cause de ses propriétés de perturbateur endocrinien.
Toutes les molécules organiques, en particulier les composés hétérocycliques, présents dans ces
échantillons de « filaments aéroportés », sont préoccupantes, -à la fois sur les plans de la santé
publique et de leur impact environnemental.
Nous pensons que ces « filaments aéroportés » pourraient résulter de la recombinaison des
substances rejetées en haute altitude dans l'atmosphère par les réacteurs d'aviation.
Compte-tenu de la croissance du trafic aérien mondial, les résultats de cette étude préliminaire nous
paraissent justifier l'attention de l'opinion publique et des médias sur cette forme nouvelle de pollution
atmosphérique.
Pour que la communauté scientifique se saisisse rapidement du sujet pour le comprendre, et que les
autorités de tutelle de l'aviation, civile ou militaire, puissent alors contrôler efficacement cette nouvelle
forme de pollution atmosphérique globale.
Bernard TAILLIEZ
Docteur ès Sciences
Directeur Scientifique – Fondateur
Responsable Assurance-Qualité
Several samples of « air borne filaments » collected in November and December 2012 throughout the
french territory were sent to our laboratory (originating from Thénioux, Saint Clément des Levées,
Saint Martin de Crau, and Malabat (collection points located on the map of France, page 118).
For each of these samples, two Curie-Point thermal desorption experiments were conducted at
445°C, directly as well as after in-situ methylation (a process allowing detection of polar compounds
potentially present).
The organic compounds generated in this series of eight experiments were -each time- separated
by gas chromatography and identified by mass spectrometry (GC/MS).
The data obtained were interpreted and the detailled results are presented in this analytical report.
It appears that these « air borne filaments » are complex organic polymers, containing many synthetic
chemicals, as evidenced by GC/MS screening of their thermal decomposition products.
Many organic molecules commonly encountered in the composition of jet fuels and jet reactors
lubricants were evidenced in this investigation.
The four samples studied contain several toxic synthetic compounds (phthalates) and three of them
contain DEHP, a member of this family of particular concern due to its properties of endocrin disruptor.
All organic molecules, particularly the heterocyclic compounds, present in the « air borne filaments »
samples represent a strong concern, for public health as well as environnemental protection.
We think these « air borne filaments » could result from the recombination of substances that are
rejected at high altitude in the atmosphere by jet engines.
Considering the fast growth rate of the world-wide air transportation industry, the results of our
preliminary study should draw the attention of the public opinion and of the media on this new form of
atmospheric pollution.
Hoping the scientific community will soon begin studies to understand the subject, so that the air
transportation authorities can play an efficient role in controlling this new form of global atmospheric
pollution.
Bernard TAILLIEZ
Docteur ès Sciences
Directeur Scientifique – Fondateur
Responsable Assurance-Qualité
Figure 1
Echantillon « filaments aéroportés » _121112-04 Désorption thermique 30 secondes à 445°C
Chromatogramme ionique total
Figure 2
Echantillon « filaments aéroportés » _121112-04 Désorption thermique 30 secondes à 445°C avec méthylation « in-situ ».
Chromatogramme ionique total
Figure 3
Echantillon « filaments aéroportés » _121119-01 Désorption thermique 30 secondes à 445°C
Chromatogramme ionique total
Figure 4
Echantillon « filaments aéroportés » _121119-01 Désorption thermique 30 secondes à 445°C avec méthylation « in-situ ».
Chromatogramme ionique total
Figure 5
Echantillon « filaments aéroportés » _121129-01 Désorption thermique 30 secondes à 445°C.
Chromatogramme ionique total
Figure 6
Echantillon « filaments aéroportés » _121129-01 Désorption thermique 30 secondes à 445°C avec méthylation « in-situ ».
Chromatogramme ionique total
Figure 7
Echantillon « filaments aéroportés » _121203-01 Désorption thermique 30 secondes à 445°C .
Chromatogramme ionique total
Figure 8
Echantillon « filaments aéroportés » _121203-01 Désorption thermique 30 secondes à 445°C avec méthylation « in-situ ».
Chromatogramme ionique total
Figure 9
Echantillons « filaments aéroportés » Désorption thermique 30 secondes à 445°C.
Fragmentogrammes m/z=149 (ion caractéristique des phthalates organiques)
1112-04A.TKF
RT 1.18 Trisulfide, dimethyl (CAS) @85%
2,3,4-Trithiapentane
4-AMINO-1,2,4-TRIAZOL-5-ONE @29%
3H-1,2,4-Triazol-3-one, 4-amino-2,4-dihydro- (CAS)
.DELTA.2-1,2,4-Triazolin-5-one, 4-amino-
Methyldiazoacetate @22%
Acetic acid, diazo-, methyl ester (CAS)
Carbomethoxydiazomethane
1112-04B.TKF
RT 1.22 Acetonitrile, (dimethylamino)- (CAS) @31%
N,N-DIMETHYLAMINOETHANENITRILE
(Dimethylamino)acetonitrile
N-(Cyanomethyl)dimethylamine
1119-01A.TKF
RT 1.44 Butanal, 3-methyl- (CAS) @59%
3-Methylbutanal
Isovaleraldehyde
Isovaleral
Isopentanal
3-Methylbutan-1-al
Isovalerylaldehyde
Isovaleric aldehyde
.beta.-Methylbutanal
3-Methylbutyraldehyde
Isoamylaldehyde
iso-Valeraldehyde
3-Methyl-1-butanal
Butyraldehyde, 3-methyl-
3-methyl butanal
1119-01B.TKF
RT 1.40 Benzene, methoxy- (CAS) @86%
Anisole
Anisol
Anizol
Methoxybenzene
Methyl phenyl ether
Phenyl methyl ether
Phenoxymethane
1203-01A.TKF
RT 29.16-29.24 Pyridine, 4-methyl- (CAS) @91%
.gamma.-Picoline
Ba 35846
4-Methylpyridine
4-Picoline
4-Methylpyridineate
.gamma.-Methylpyridine
1203-01B.TKF
RT 20.10 Oxirane, (methoxymethyl)- (CAS) @17%
1,2-Epoxy-3-methoxypropane
Methylglycidyl ether
Glycidyl methyl ether
Methyl glycidyl ether
Glycidol methyl ether
(Methoxymethyl)oxirane
3-Methoxypropylene oxide
3-Methoxy-1,2-epoxypropane
Propane, 1,2-epoxy-3-methoxy-
3-Methoxy-1,2-epoxy-propane
2-methoxymethyl-oxirane
1112-04A TIC
1.18 Trisulfide, dimethyl (CAS) @85%
1.55 Benzene, pentyl- (CAS) @32%
29.17 232050.966 2.13 9.94 Hexadecanal (CAS) @54%
Octadecanal (CAS) @50%
29.57 S 2335540.800 21.43 100.00 Phenol, 4-methyl- (CAS) @92%
Phenol, 3-methyl- (CAS) @92%
32.03 Isoquinoline (CAS) @82%
Quinoline (CAS) @82%
32.39 Non identifiable
32.87 Phenol, 4-ethyl- (CAS) @56%
Phenol, 2-ethyl- (CAS) @55%
33.53 124924.847 0.86 5.35 Phenol, 3-ethyl- (CAS) @81%
Pentanamide (CAS) @74%
35.58 292261.074 2.68 12.51 2,5-Furan (CAS) @85%
36.94 225498.039 2.07 9.66 1,4-Benzenedicarbonitrile (CAS) @93%
1,3-Benzenedicarbonitrile (CAS) @93%
43.38 229886.289 2.11 9.84 Benzofuran, 2,3-dihydro- (CAS) @86%
1H-Indole (CAS) @83%
44.61-44.63 Benzoic acid (CAS) @96%
45.29-45.36 1H-Indole, 2-methyl- (CAS) @64%
46.17 369127.460 3.39 15.80 3,5-DIOXO-1,2,4-TRIAZINE @14%
51.88 376941.278 3.46 16.14 2,5-Pyrrolidinedione (CAS) @81%
55.69 255562.159 2.35 10.94 Tetradecanoic acid (CAS) @95%
58.55 277598.599 2.55 11.89 Non identifiable
60.16 177611.497 1.63 7.60 Non identifiable
65.15 923598.410 8.48 39.55 Hexadecanoic acid (CAS) @96%
65.85 220180.403 2.02 9.43 9-Octadecen-1-ol, (Z)- (CAS) @56%
69.59 155819.846 1.43 6.67 Urea (CAS) @25%
74.10 504892.001 4.63 21.62 Octadecenoic acid (Z)- (CAS) @94%
74.46 702782.081 6.45 30.09 9-Octadecenoic acid (Z)- (CAS) @94%
76.44 2316099.271 21.26 99.17 Linoleic acid @91%
76.99 384116.336 3.53 16.45 1,2-Benzenedicarboxylic acid, bis(2-ethylhexyl) ester (CAS) @65%
78.46 232728.898 2.14 9.96 1,4-Benzenedicarboxylic acid, methyl ester (CAS) @95%
80.07 350601.765 3.22 15.01 Furo[2,3-c]pyridine, 2-methyl- (CAS) @92%
1H-Indol-5-ol (CAS) @88%
Benzene, 1-azido-2-methyl- (CAS) @64%
82.71 163123.283 1.50 6.98 2,4-Imidazolidinedione, 5-methyl- (CAS) @67%
86.71 170376.435 1.56 7.29 2,4-Imidazolidinedione (CAS) @67%
4-AMINO-1,2,4-TRIAZOL-5-ONE @29%
Methyldiazoacetate @22%
Pyrrolidine, 1-nitroso- (CAS) @22%
1112-04B TIC
1.22 972827.417 10.95 67.26 Acetonitrile, (dimethylamino)- (CAS) @31%
6.53 492817.020 5.55 34.07 1,3,5-Triazine, hexahydro-1,3,5-trimethyl- (CAS) @61%
29.58 S 1446354.927 16.28 100.00 2,4-imidazolidinedione, 3,5,5-trimethyl- @53%
29.80 1277522.758 14.38 88.33 Naphthalene (CAS) @58%
Urea, trimethyl- (CAS) @28%
Phenol, 4-methyl- (CAS) @65%
32.08 Isoquinoline (CAS) @76%
32.44 207857.297 2.34 14.37 Eicosanoic acid, methyl ester (CAS) @95%
33.69 176779.829 1.99 12.22 DIHYDROURACIL, 1-N-METHYL- @58%
33.98 209216.311 2.36 14.47 1,3,5,7-Tetraazatricyclo[3.3.1.1(3,7)]decane (CAS) @25%
34.24 359301.813 4.05 24.84 Non identifiable
36.66 712938.796 8.03 49.29 1,3-Benzenedicarboxylic acid, dimethyl ester (CAS) @95%
1,4-Benzenedicarboxylic acid, dimethyl ester (CAS) @95%
37.28 461376.093 5.19 31.90 Hexadecanoic acid, methyl ester (CAS) @95%
41.90 106325.454 1.20 7.35 benzeneacetonitrile, 4-methoxy- @94%
46.23 443887.627 5.00 30.69 9-Octadecenoic acid, methyl ester, (E)- (CAS) @95%
46.96 141368.385 1.59 9.77 Octadecanoic acid, methyl ester (CAS) @64%
52.46 137216.801 1.54 9.49 Non identifiable
53.82 105876.625 1.19 7.32 Non identifiable
55.43 206250.288 2.32 14.26 Non identifiable
55.80 578423.365 6.51 39.99 hydantoin, 1-butyl- @33%
57.96 99227.363 1.12 6.86 Non identifiable
1119-01A TIC
1.44 199572.199 1.40 9.12 Butanal, 3-methyl- (CAS) @59%
1.66 benzeneethanol, .beta.-ethenyl- @68%
29.12 413338.386 2.91 18.88 2-hexen-1-ol, (z)- @59%
29.49 204843.501 1.44 9.36 Phenol, 2-ethyl- (CAS) @88%
Phenol, 3,5-dimethyl- (CAS) @82%
30.00 S 2189137.318 15.39 100.00 Phenol, 3-methyl- (CAS) @92%
30.29 674921.441 4.74 30.83 Phenol, 4-methyl- (CAS) @89%
Phenol, 3-methyl- (CAS) @89%
32.64 281931.189 1.98 12.88 Non identifiable
33.34 Phenol, 2-ethyl- (CAS) @81%
Phenol, 4-ethyl- (CAS) @78%
33.89 503582.701 3.54 23.00 Pentanamide (CAS) @67%
pentanamide, 4-methyl- @63%
35.54 Non identifiable
36.97 208290.342 1.46 9.51 2,5-Furandione, 3,4-dimethyl- (CAS) @76%
43.16 Benzofuran, 2,3-dihydro- (CAS) @67%
43.20 368339.283 2.59 16.83 1H-Indole (CAS) @88%
Benzonitrile, 3-methyl- (CAS) @83%
45.00 342001.259 2.40 15.62 3(2h)-isoxazolone, 4,5-dimethyl- @63%
46.06 755425.781 5.31 34.51 2-Pyridinecarboxylic acid (CAS) @85%
51.85 799053.978 5.62 36.50 2,5-Pyrrolidinedione (CAS) @67%
54.53-54.78 2(1H)-Pyridinone (CAS) @86%
58.16 563207.031 3.96 25.73 Non identifiable
64.79 347639.617 2.44 15.88 Hexadecanoic acid (CAS) @94%
72.71 230272.744 1.62 10.52 pyrazine, methyl-, 1-oxide @69%
75.46 184659.943 1.30 8.44 1,2-Benzenedicarboxylic acid, bis(2-ethylhexyl) ester (CAS) @67%
76.89 357603.244 2.51 16.34 Non identifiable
78.62-78.88 1,4-Benzenedicarboxylic acid, methyl ester (CAS) @85%
79.61 826676.174 5.81 37.76 Furo[2,3-c]pyridine, 2-methyl- (CAS) @26%
82.51 1183652.479 8.32 54.07 Non identifiable
84.34 233312.998 1.64 10.66 Non identifiable
86.36 814988.185 5.73 37.23 2,4-Imidazolidinedione (CAS) @76%
88.26 215583.371 1.52 9.85 Non identifiable
1119-01B TIC
1.40 Benzene, methoxy- (CAS) @86%
2.50 1800695.528 9.82 37.95 Benzene, 1-methoxy-4-methyl- (CAS) @96%
3.60 361635.391 1.97 7.62 Non identifiable
4.37 251035.737 1.37 5.29 Non identifiable
7.98-8.08 benzene, 1-ethenyl-4-methoxy- (CAS) @93%
10.90 399969.482 2.18 8.43 Aziridine (CAS) @25%
29.27 S 4744565.948 25.86 100.00 Phenol (CAS) @95%
30.63 814105.448 4.44 17.16 Non identifiable
30.85-31.03 1,3-Benzenedicarbonitrile (CAS) @21%
31.99 Non identifiable
36.46 460463.334 2.51 9.71 1,3-Benzenedicarboxylic acid, dimethyl ester (CAS) @92%
38.18 2182483.401 11.90 46.00 Hexadecanoic acid, methyl ester (CAS) @94%
41.23 357769.762 1.95 7.54 Non identifiable
41.89 322483.500 1.76 6.80 benzeneacetonitrile, 4-methoxy- @96%
46.69 758187.142 4.13 15.98 9-Octadecenoic acid (Z)-, methyl ester (CAS) @93%
47.27 450596.559 2.46 9.50 Heptadecanoic acid, 16-methyl-, methyl ester (CAS) @54%
52.74 1202612.911 6.56 25.35 4-AMINO-3-METHYL-1,2,4-TRIAZOL-5-ONE @28%
55.42 1122886.945 6.12 23.67 Non identifiable
57.91 326854.696 1.78 6.89 Non identifiable
75.18 366657.537 2.00 7.73 Non identifiable
77.16 265893.641 1.45 5.60 piperidine, 1-(ethoxymethyl)- @28%
80.17 1035200.905 5.64 21.82 Aziridine, 2-(1,1-dimethylethyl)-3-methyl-, trans- (CAS) @28%
83.69 493351.604 2.69 10.40 Non identifiable
1203-01A TIC
29.16 526221.820 9.39 91.88 Pyridine, 4-methyl- (CAS) @91%
Phenol (CAS) @83%
29.71 S 572715.065 10.22 100.00 Non identifiable
30.56 271551.487 4.84 47.41 Phenol, 4-methyl- (CAS) @86%
Phenol, 2-methyl- (CAS) @86%
32.35 104565.357 1.87 18.26 Non identifiable
33.53 184167.106 3.29 32.16 Pentanamide (CAS) @30%
35.62 99990.942 1.78 17.46 2H-Pyran-2-one (CAS) @79%
36.68 69823.887 1.25 12.19 Tridecanoic acid, methyl ester (CAS) @51%
38.69 73655.846 1.31 12.86 Tetradecanoic acid, methyl ester (CAS) @53%
40.31 254645.441 4.54 44.46 Non identifiable
45.44 362516.518 6.47 63.30 Non identifiable
51.27 249760.338 4.46 43.61 2,5-Pyrrolidinedione (CAS) @67%
55.56 143884.425 2.57 25.12 N-NONADECANE 55%
57.84 362554.913 6.47 63.30 Non identifiable
60.40 337890.629 6.03 59.00 Non identifiable
65.86 466827.868 8.33 81.51 Hexadecanoic acid (CAS) 95%
76.21 218416.669 3.90 38.14 1,2-Benzenedicarboxylic acid, bis(2-ethylhexyl) ester (CAS) @51%
76.90 243405.742 4.34 42.50 Non identifiable
78.15 87820.815 1.57 15.33 1H-Benzotriazole (CAS) @30%
80.61 124365.487 2.22 21.72 Furo[2,3-b]pyridine, 2-methyl- (CAS) @83%
82.95 374159.560 6.67 65.33 Non identifiable
84.27 87196.032 1.56 15.23 Non identifiable
85.85 91281.898 1.63 15.94 Non identifiable
86.99 137997.204 2.46 24.10 2h-imidazole-2-thione, 1,3-dihydro- @24%
89.37 111886.348 2.00 19.54 Cyclododecane (CAS) @19%
1203-01B TIC
18.41 29392.716 2.11 9.39 Non identifiable
19.25 26668.464 1.91 8.52 Non identifiable
20.10 234793.640 16.86 75.05 Oxirane, (methoxymethyl)- (CAS) @17%
20.54 282259.490 20.27 90.22 Non identifiable
21.31 S 312863.448 22.47 100.00 Non identifiable
21.60 251252.413 18.04 80.31 Non identifiable
21.82 214408.120 15.40 68.53 1-Butanol, 4-methoxy- (CAS) @61%
22.70 15220.840 1.09 4.87 Non identifiable
25.12 25752.070 1.85 8.23 Non identifiable
ECHANTILLONS
Parmi les nombreux échantillons reçus de la part des divers participants au financement de l'étude, les quatre (4) suivants
ont été retenus dans notre investigation :
ACSEIPICA-18 Thenioux
_121112-04 Masse exploitable 94,6 milligrammes
Filaments blancs sur branche végétal
(500mg environ, flacon culinaire 100mL, verre, bouchon-opercule métal vissé)
_Réf. client = 18100 Thenioux
ACSEIPICA-32 Malabat
_121203-01 masse exploitable = 3.5 milligrammes
Filaments blancs
(500mg environ, flacon culinaire verre 150mL, bouchon-clip métal doré)
_Réf. client = échantillons trouvés dans le Gers 2011 jaunâtre / 2012 blanc
POINTS DE COLLECTE
« Filaments Aéroportés »
COLLECTION POINTS
« Air borne Filaments »
FICHIERS de DONNEES
HP5988L 1000amu EI/CI +/-
Operator: Dr. Bernard Tailliez
Method: (Wed May 01 07:57:52 2013) C:\VECTOR2\INSTR1\METHODS\0501-01.MTH
Cal: C:\VECTOR2\INSTR1\METHODS\-200.CAL
STABILWAX 0.25mm_30m_0.25um Tmax=250C 45C-(1.5C/min)-180C Run=90min DS=2min
INJ=260C DET=250C H2=34mL/min@5psi SL=0.8 Scan=35-350amu EMV=2800
Scan Parameters:
SCAN every 10 secs for 1 min, base range GCMS_Off
SCAN every 0 secs for 89 min, base range MS_On 35-350 MS_On
CONDITIONS EXPERIMENTALES
METHYLATION « in-situ »
Réactif: TMAH tetramethyl ammonium hydroxide CAS# 75-59-2
Température (°C): 445
Durée (secondes): 30
Nos prestations sont réalisées en conformité avec les critères de la norme internationale ISO 17025 (2005)
Ceci atteste de notre compétence technique dans les domaines de la chromatographie et de la spectrométrie de masse
ainsi que du bon fonctionnement de notre système interne de management de la qualité.