Física

Abstract In-vivo and in-situ measurement of the radiation dose administered during brachytherapy faces several technical challenges, requiring a very compact, tissue-equivalent, linear and highly sensitive dosimeter, particularly in low-dose rate brachytherapy procedures, which use radioactive seeds with low energy and low dose deposition rate. In this work we present a scintillating optical fiber dosimeter composed of a flexible sensitive probe and a dedicated electronic readout system based on silicon photomultiplier photodetection, capable of operating both in pulse and current modes. The performance of the scintillating fiber optic dosimeter was evaluated in low energy regimes, using an X-ray tube operating at voltages of 40–50 kV and currents below 1 mA, to assess minimum dose response of the scintillating fiber. The dosimeter shows a linear response with dose and is capable of detecting mGy dose variations like an ionization chamber. Besides fulfilling all the requirements for a dosimeter in brachytherapy, the high sensitivity of this device makes it a suitable candidate for application in low-dose rate brachytherapy. According to Peralta and Rego [1] , the BCF-10 and BCF-60 scintillating optical fibers used in dosimetry exhibit high variations in their sensitivity for photon beams in the 25–100 kVp energy range. Energy linearity for energies below 50 keV needs to be further investigated, using monochromatic X-ray photons.

Genomes are dynamic biological units, with processes of gene duplication and loss triggering evolutionary novelty. The mammalian skin provides a remarkable case study on the occurrence of adaptive morphological innovations. Skin sebaceous glands (SGs), for instance, emerged in the ancestor of mammals serving pivotal roles, such as lubrication, waterproofing, immunity, and thermoregulation, through the secretion of sebum, a complex mixture of various neutral lipids such as triacylglycerol, free fatty acids, wax esters, cholesterol, and squalene. Remarkably, SGs are absent in a few mammalian lineages, including the iconic Cetacea. We investigated the evolution of the key molecular components responsible for skin sebum production: Dgat2l6, Awat1, Awat2, Elovl3, Mogat3, and Fabp9. We show that all analyzed genes have been rendered nonfunctional in Cetacea species (toothed and baleen whales). Transcriptomic analysis, including a novel skin transcriptome from blue whale, supports gene ina...

A rapid development in personal electronics has raised challenging requirements for portable and sustainable power sources. For example, in wearable technologies, the concept of wearable body area network brings body motion and vital signs monitoring together in synergy. For this, a key aspect is sustainable portable energy, available anywhere, at any time, as generated by triboelectric nanogenerators (TENG). This technology usually demands high-cost processes and materials and still suffer from low power output, as well as unstable output values due to charge generating stimulus with variable intensities. In this work, we present TENGs using shear exfoliated graphene as electrodes as well as active triboelectric layer deposited by a simple solution process. Graphene in combination with polymers such as polydimethylsiloxane (PDMS) were used to produce TENG devices using low-cost solution processing methods. Device electrical power generation was tested with a cyclic physical stimulu...

Nowadays, transparent and touch-related interaction are two significant trends in information and communication technologies (ICTs). For this reason new alternatives to indium-tin oxide (ITO) are being developed, with this work focusing on one possible approach, based on nickel nanowire networks. These are interesting because of its characteristic high conductivity derived from the metal properties, while having the advantage of the chosen material existing with a large abundance, with much lower cost than materials like indium or silver. Several methods for producing these structures were studied. Initially by an hydrothermal process that proved necessary to have a good control of the applied magnetic field, allowing to obtain nanowires with diameters of 800nm but with a wide variety of lengths. To assure a better process control another route was explored, based on electrodeposition using a mold, varying the reaction time, the applied current and also the electrolyte concentration...

Summary Internet of Things (IoT) and recently Internet of Nano Things (IoNT) bear the promise of new devices able to communicate and assist our daily lives toward wearable technologies which demand a versatile integration such as in wireless body networks (WBN), sensing, and health monitorization. These must comply with stringent constraints on energy usage. Dimensions and complexity intensify the need for small and maintenance-free power sources. Environment energy harvesting and storage is an important approach to sustain operation for a long time. Triboelectric nanogenerators (TENGs) arise as a strong and promising solution to power the new field of outcoming self-sustainable devices, implantable, and wearable devices. They can transform mechanical energy in different modes, have simple structures, and use vulgar and sustainable materials. This paper makes a review about TENGs technology, construction, materials, operation, and focus on strategies for harvesting circuits. Main challenges like efficiency, reliability, energy storage, and sustainability are discussed.