| Age | Commit message (Collapse) | Author |
|---|
|
It seems potentially useful to label our shared libraries with version
information, now that a facility exists for retrieving that. This
patch labels them with the PG_VERSION string. There was some
discussion about using semantic versioning conventions, but that
doesn't seem terribly helpful for modules with no SQL-level presence;
and for those that do have SQL objects, we typically expect them
to support multiple revisions of the SQL definitions, so it'd still
not be very helpful.
I did not label any of src/test/modules/. It seems unnecessary since
we don't install those, and besides there ought to be someplace that
still provides test coverage for the original PG_MODULE_MAGIC macro.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/dd4d1b59-d0fe-49d5-b28f-1e463b68fa32@gmail.com
|
|
Backpatch-through: 13
|
|
Many of them just seem to have been copied around for no real reason.
Their presence causes (small) risks of hiding actual type mismatches
or silently discarding qualifiers
Discussion: https://www.postgresql.org/message-id/flat/461ea37c-8b58-43b4-9736-52884e862820@eisentraut.org
|
|
as determined by IWYU
Similar to commit dbbca2cf299, but for contrib, pl, and src/test/.
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://www.postgresql.org/message-id/flat/0df1d5b1-8ca8-4f84-93be-121081bde049%40eisentraut.org
|
|
Reported-by: Michael Paquier
Discussion: https://postgr.es/m/ZZKTDPxBBMt3C0J9@paquier.xyz
Backpatch-through: 12
|
|
Some of the ambuildempty functions used smgrwrite() directly, followed
by smgrimmedsync(). A few small problems with that:
Firstly, one is supposed to use smgrextend() when extending a
relation, not smgrwrite(). It doesn't make much difference in
production builds. smgrextend() updates the relation size cache, so
you miss that, but that's harmless because we never use the cached
relation size of an init fork. But if you compile with
CHECK_WRITE_VS_EXTEND, you get an assertion failure.
Secondly, the smgrwrite() calls were performed before WAL-logging, so
the page image written to disk had 0/0 as the LSN, not the LSN of the
WAL record. That's also harmless in practice, but seems sloppy.
Thirdly, it's better to use the buffer cache, because then you don't
need to smgrimmedsync() the relation to disk, which adds latency.
Bypassing the cache makes sense for bulk operations like index
creation, but not when you're just initializing an empty index.
Creation of unlogged tables is hardly performance bottleneck in any
real world applications, but nevertheless.
Backpatch to v16, but no further. These issues should be harmless in
practice, so better to not rock the boat in older branches.
Reviewed-by: Robert Haas
Discussion: https://www.postgresql.org/message-id/6e5bbc08-cdfc-b2b3-9e23-1a914b9850a9@iki.fi
|
|
In order to have the option to use O_DIRECT/FILE_FLAG_NO_BUFFERING in a
later commit, we need the addresses of user space buffers to be well
aligned. The exact requirements vary by OS and file system (typically
sectors and/or memory pages). The address alignment size is set to
4096, which is enough for currently known systems: it matches modern
sectors and common memory page size. There is no standard governing
O_DIRECT's requirements so we might eventually have to reconsider this
with more information from the field or future systems.
Aligning I/O buffers on memory pages is also known to improve regular
buffered I/O performance.
Three classes of I/O buffers for regular data pages are adjusted:
(1) Heap buffers are now allocated with the new palloc_aligned() or
MemoryContextAllocAligned() functions introduced by commit 439f6175.
(2) Stack buffers now use a new struct PGIOAlignedBlock to respect
PG_IO_ALIGN_SIZE, if possible with this compiler. (3) The buffer
pool is also aligned in shared memory.
WAL buffers were already aligned on XLOG_BLCKSZ. It's possible for
XLOG_BLCKSZ to be configured smaller than PG_IO_ALIGNED_SIZE and thus
for O_DIRECT WAL writes to fail to be well aligned, but that's a
pre-existing condition and will be addressed by a later commit.
BufFiles are not yet addressed (there's no current plan to use O_DIRECT
for those, but they could potentially get some incidental speedup even
in plain buffered I/O operations through better alignment).
If we can't align stack objects suitably using the compiler extensions
we know about, we disable the use of O_DIRECT by setting PG_O_DIRECT to
0. This avoids the need to consider systems that have O_DIRECT but
can't align stack objects the way we want; such systems could in theory
be supported with more work but we don't currently know of any such
machines, so it's easier to pretend there is no O_DIRECT support
instead. That's an existing and tested class of system.
Add assertions that all buffers passed into smgrread(), smgrwrite() and
smgrextend() are correctly aligned, unless PG_O_DIRECT is 0 (= stack
alignment tricks may be unavailable) or the block size has been set too
small to allow arrays of buffers to be all aligned.
Author: Thomas Munro <thomas.munro@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/CA+hUKGK1X532hYqJ_MzFWt0n1zt8trz980D79WbjwnT-yYLZpg@mail.gmail.com
|
|
Change data buffer to void *, from char *, and add const where
appropriate. This makes it match the File API (see also
2d4f1ba6cfc2f0a977f1c30bda9848041343e248) and stdio.
Discussion: https://www.postgresql.org/message-id/flat/11dda853-bb5b-59ba-a746-e168b1ce4bdb%40enterprisedb.com
|
|
Backpatch-through: 11
|
|
I thought I had these in d8df67bb1, but per report from Andres Freund, I
missed some.
Reviewed-by: Andres Freund
Discussion: https://postgr.es/m/20221005214052.c4tkudawyp5wxt3c@awork3.anarazel.de
|
|
We have been using the term RelFileNode to refer to either (1) the
integer that is used to name the sequence of files for a certain relation
within the directory set aside for that tablespace/database combination;
or (2) that value plus the OIDs of the tablespace and database; or
occasionally (3) the whole series of files created for a relation
based on those values. Using the same name for more than one thing is
confusing.
Replace RelFileNode with RelFileNumber when we're talking about just the
single number, i.e. (1) from above, and with RelFileLocator when we're
talking about all the things that are needed to locate a relation's files
on disk, i.e. (2) from above. In the places where we refer to (3) as
a relfilenode, instead refer to "relation storage".
Since there is a ton of SQL code in the world that knows about
pg_class.relfilenode, don't change the name of that column, or of other
SQL-facing things that derive their name from it.
On the other hand, do adjust closely-related internal terminology. For
example, the structure member names dbNode and spcNode appear to be
derived from the fact that the structure itself was called RelFileNode,
so change those to dbOid and spcOid. Likewise, various variables with
names like rnode and relnode get renamed appropriately, according to
how they're being used in context.
Hopefully, this is clearer than before. It is also preparation for
future patches that intend to widen the relfilenumber fields from its
current width of 32 bits. Variables that store a relfilenumber are now
declared as type RelFileNumber rather than type Oid; right now, these
are the same, but that can now more easily be changed.
Dilip Kumar, per an idea from me. Reviewed also by Andres Freund.
I fixed some whitespace issues, changed a couple of words in a
comment, and made one other minor correction.
Discussion: http://postgr.es/m/CA+TgmoamOtXbVAQf9hWFzonUo6bhhjS6toZQd7HZ-pmojtAmag@mail.gmail.com
Discussion: http://postgr.es/m/CA+Tgmobp7+7kmi4gkq7Y+4AM9fTvL+O1oQ4-5gFTT+6Ng-dQ=g@mail.gmail.com
Discussion: http://postgr.es/m/CAFiTN-vTe79M8uDH1yprOU64MNFE+R3ODRuA+JWf27JbhY4hJw@mail.gmail.com
|
|
Because this strategy logs changes on a block-by-block basis, it
avoids the need to checkpoint before and after the operation.
However, because it logs each changed block individually, it might
generate a lot of extra write-ahead logging if the template database
is large. Therefore, the older strategy remains available via a new
STRATEGY parameter to CREATE DATABASE, and a corresponding --strategy
option to createdb.
Somewhat controversially, this patch assembles the list of relations
to be copied to the new database by reading the pg_class relation of
the template database. Cross-database access like this isn't normally
possible, but it can be made to work here because there can't be any
connections to the database being copied, nor can it contain any
in-doubt transactions. Even so, we have to use lower-level interfaces
than normal, since the table scan and relcache interfaces will not
work for a database to which we're not connected. The advantage of
this approach is that we do not need to rely on the filesystem to
determine what ought to be copied, but instead on PostgreSQL's own
knowledge of the database structure. This avoids, for example,
copying stray files that happen to be located in the source database
directory.
Dilip Kumar, with a fairly large number of cosmetic changes by me.
Reviewed and tested by Ashutosh Sharma, Andres Freund, John Naylor,
Greg Nancarrow, Neha Sharma. Additional feedback from Bruce Momjian,
Heikki Linnakangas, Julien Rouhaud, Adam Brusselback, Kyotaro
Horiguchi, Tomas Vondra, Andrew Dunstan, Álvaro Herrera, and others.
Discussion: http://postgr.es/m/CA+TgmoYtcdxBjLh31DLxUXHxFVMPGzrU5_T=CYCvRyFHywSBUQ@mail.gmail.com
|
|
Backpatch-through: 10
|
|
The idea behind this patch is to design out bugs like the one fixed
by commit 9d523119f. Previously, once one did RelationOpenSmgr(rel),
it was considered okay to access rel->rd_smgr directly for some
not-very-clear interval. But since that pointer will be cleared by
relcache flushes, we had bugs arising from overreliance on a previous
RelationOpenSmgr call still being effective.
Now, very little code except that in rel.h and relcache.c should ever
touch the rd_smgr field directly. The normal coding rule is to use
RelationGetSmgr(rel) and not expect the result to be valid for longer
than one smgr function call. There are a couple of places where using
the function every single time seemed like overkill, but they are now
annotated with large warning comments.
Amul Sul, after an idea of mine.
Discussion: https://postgr.es/m/CANiYTQsU7yMFpQYnv=BrcRVqK_3U3mtAzAsJCaqtzsDHfsUbdQ@mail.gmail.com
|
|
Bloom, GIN, GiST and SP-GiST rely on PageInit() to initialize the
contents of a page, and this routine fills entirely a page with zeros
for a size of BLCKSZ, including the special space. Those index AMs have
been using an extra memset() call to fill with zeros the special page
space, or even the whole page, which is not necessary as PageInit()
already does this work, so let's remove them. GiST was not doing this
extra call, but has commented out a system call that did so since
6236991.
While on it, remove one MAXALIGN() for SP-GiST as PageInit() takes care
of that. This makes the whole page initialization logic more consistent
across all index AMs.
Author: Bharath Rupireddy
Reviewed-by: Vignesh C, Mahendra Singh Thalor
Discussion: https://postgr.es/m/CALj2ACViOo2qyaPT7krWm4LRyRTw9kOXt+g6PfNmYuGA=YHj9A@mail.gmail.com
|
|
Add an executor aminsert() hint mechanism that informs index AMs that
the incoming index tuple (the tuple that accompanies the hint) is not
being inserted by execution of an SQL statement that logically modifies
any of the index's key columns.
The hint is received by indexes when an UPDATE takes place that does not
apply an optimization like heapam's HOT (though only for indexes where
all key columns are logically unchanged). Any index tuple that receives
the hint on insert is expected to be a duplicate of at least one
existing older version that is needed for the same logical row. Related
versions will typically be stored on the same index page, at least
within index AMs that apply the hint.
Recognizing the difference between MVCC version churn duplicates and
true logical row duplicates at the index AM level can help with cleanup
of garbage index tuples. Cleanup can intelligently target tuples that
are likely to be garbage, without wasting too many cycles on less
promising tuples/pages (index pages with little or no version churn).
This is infrastructure for an upcoming commit that will teach nbtree to
perform bottom-up index deletion. No index AM actually applies the hint
just yet.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Victor Yegorov <vyegorov@gmail.com>
Discussion: https://postgr.es/m/CAH2-Wz=CEKFa74EScx_hFVshCOn6AA5T-ajFASTdzipdkLTNQQ@mail.gmail.com
|
|
Backpatch-through: 9.5
|
|
Backpatch-through: update all files in master, backpatch legal files through 9.4
|
|
This follows multiple complains from Peter Geoghegan, Andres Freund and
Alvaro Herrera that this issue ought to be dug more before actually
happening, if it happens.
Discussion: https://postgr.es/m/20191226144606.GA5659@alvherre.pgsql
|
|
The following renaming is done so as source files related to index
access methods are more consistent with table access methods (the
original names used for index AMs ware too generic, and could be
confused as including features related to table AMs):
- amapi.h -> indexam.h.
- amapi.c -> indexamapi.c. Here we have an equivalent with
backend/access/table/tableamapi.c.
- amvalidate.c -> indexamvalidate.c.
- amvalidate.h -> indexamvalidate.h.
- genam.c -> indexgenam.c.
- genam.h -> indexgenam.h.
This has been discussed during the development of v12 when table AM was
worked on, but the renaming never happened.
Author: Michael Paquier
Reviewed-by: Fabien Coelho, Julien Rouhaud
Discussion: https://postgr.es/m/20191223053434.GF34339@paquier.xyz
|
|
Not all AMs use HeapTuples internally, making it inconvenient to pass
a HeapTuple. As the index callbacks really only need the TID, not the
full tuple, modify callback to only take ItemPointer.
Author: Ashwin Agrawal
Reviewed-By: Andres Freund
Discussion: https://postgr.es/m/CALfoeis6=8ehuR=VNtHvj3z16cYfCwPdTcpaxU+sfSUJ5QgR3g@mail.gmail.com
|
|
The basic rule we follow here is to always first include 'postgres.h' or
'postgres_fe.h' whichever is applicable, then system header includes and
then Postgres header includes. In this, we also follow that all the
Postgres header includes are in order based on their ASCII value. We
generally follow these rules, but the code has deviated in many places.
This commit makes it consistent just for contrib modules. The later
commits will enforce similar rules in other parts of code.
Author: Vignesh C
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/CALDaNm2Sznv8RR6Ex-iJO6xAdsxgWhCoETkaYX=+9DW3q0QCfA@mail.gmail.com
|
|
This uses the progress reporting infrastructure added by c16dc1aca5e0,
adding support for CREATE INDEX and CREATE INDEX CONCURRENTLY.
There are two pieces to this: one is index-AM-agnostic, and the other is
AM-specific. The latter is fairly elaborate for btrees, including
reportage for parallel index builds and the separate phases that btree
index creation uses; other index AMs, which are much simpler in their
building procedures, have simplistic reporting only, but that seems
sufficient, at least for non-concurrent builds.
The index-AM-agnostic part is fairly complete, providing insight into
the CONCURRENTLY wait phases as well as block-based progress during the
index validation table scan. (The index validation index scan requires
patching each AM, which has not been included here.)
Reviewers: Rahila Syed, Pavan Deolasee, Tatsuro Yamada
Discussion: https://postgr.es/m/20181220220022.mg63bhk26zdpvmcj@alvherre.pgsql
|
|
To support building indexes over tables of different AMs, the scans to
do so need to be routed through the table AM. While moving a fair
amount of code, nearly all the changes are just moving code to below a
callback.
Currently the range based interface wouldn't make much sense for non
block based table AMs. But that seems aceptable for now.
Author: Andres Freund
Discussion: https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.de
|
|
Backpatch-through: certain files through 9.4
|
|
There's a project policy against using plain "char buf[BLCKSZ]" local
or static variables as page buffers; preferred style is to palloc or
malloc each buffer to ensure it is MAXALIGN'd. However, that policy's
been ignored in an increasing number of places. We've apparently got
away with it so far, probably because (a) relatively few people use
platforms on which misalignment causes core dumps and/or (b) the
variables chance to be sufficiently aligned anyway. But this is not
something to rely on. Moreover, even if we don't get a core dump,
we might be paying a lot of cycles for misaligned accesses.
To fix, invent new union types PGAlignedBlock and PGAlignedXLogBlock
that the compiler must allocate with sufficient alignment, and use
those in place of plain char arrays.
I used these types even for variables where there's no risk of a
misaligned access, since ensuring proper alignment should make
kernel data transfers faster. I also changed some places where
we had been palloc'ing short-lived buffers, for coding style
uniformity and to save palloc/pfree overhead.
Since this seems to be a live portability hazard (despite the lack
of field reports), back-patch to all supported versions.
Patch by me; thanks to Michael Paquier for review.
Discussion: https://postgr.es/m/1535618100.1286.3.camel@credativ.de
|
|
Count the number of tuples in the index honestly, instead of assuming
that it's the same as the number of tuples in the heap. (It might be
different if the index is partial.)
Fix counting of tuples in current index page, too. This error would
have led to failing to write out the final page of the index if it
contained exactly one tuple, so that the last tuple of the relation
would not get indexed.
Back-patch to 9.6 where contrib/bloom was added.
Tomas Vondra and Tom Lane
Discussion: https://postgr.es/m/3b3d8eac-c709-0d25-088e-b98339a1b28a@2ndquadrant.com
|
|
To make this work, tuplesort.c and logtape.c must also support
parallelism, so this patch adds that infrastructure and then applies
it to the particular case of parallel btree index builds. Testing
to date shows that this can often be 2-3x faster than a serial
index build.
The model for deciding how many workers to use is fairly primitive
at present, but it's better than not having the feature. We can
refine it as we get more experience.
Peter Geoghegan with some help from Rushabh Lathia. While Heikki
Linnakangas is not an author of this patch, he wrote other patches
without which this feature would not have been possible, and
therefore the release notes should possibly credit him as an author
of this feature. Reviewed by Claudio Freire, Heikki Linnakangas,
Thomas Munro, Tels, Amit Kapila, me.
Discussion: http://postgr.es/m/CAM3SWZQKM=Pzc=CAHzRixKjp2eO5Q0Jg1SoFQqeXFQ647JiwqQ@mail.gmail.com
Discussion: http://postgr.es/m/CAH2-Wz=AxWqDoVvGU7dq856S4r6sJAj6DBn7VMtigkB33N5eyg@mail.gmail.com
|
|
Backpatch-through: certain files through 9.3
|
|
btree, hash, and bloom indexes all set up their metapages in standard
format (that is, with pd_lower and pd_upper correctly delimiting the
unused area); but they mostly didn't inform the xlog routines of this.
When calling log_newpage[_buffer], this is bad because it loses the
opportunity to compress unused data out of the WAL record. When
calling XLogRegisterBuffer, it's not such a performance problem because
all of these call sites also use REGBUF_WILL_INIT, preventing an FPI
image from being written. But it's still a good idea to provide the
flag when relevant, because that aids WAL consistency checking.
This completes the project of getting all the in-core index AMs to
handle their metapage WAL operations similarly.
Amit Kapila, reviewed by Michael Paquier
Discussion: https://postgr.es/m/0d273805-0e9e-ec1a-cb84-d4da400b8f85@lab.ntt.co.jp
|
|
perltidy run not included.
|
|
It's always been possible for index AMs to cache data across successive
amgettuple calls within a single SQL command: the IndexScanDesc.opaque
field is meant for precisely that. However, no comparable facility
exists for amortizing setup work across successive aminsert calls.
This patch adds such a feature and teaches GIN, GIST, and BRIN to use it
to amortize catalog lookups they'd previously been doing on every call.
(The other standard index AMs keep everything they need in the relcache,
so there's little to improve there.)
For GIN, the overall improvement in a statement that inserts many rows
can be as much as 10%, though it seems a bit less for the other two.
In addition, this makes a really significant difference in runtime
for CLOBBER_CACHE_ALWAYS tests, since in those builds the repeated
catalog lookups are vastly more expensive.
The reason this has been hard up to now is that the aminsert function is
not passed any useful place to cache per-statement data. What I chose to
do is to add suitable fields to struct IndexInfo and pass that to aminsert.
That's not widening the index AM API very much because IndexInfo is already
within the ken of ambuild; in fact, by passing the same info to aminsert
as to ambuild, this is really removing an inconsistency in the AM API.
Discussion: https://postgr.es/m/27568.1486508680@sss.pgh.pa.us
|
|
|
|
Previously, it was thought that this only needed to be done for the
benefit of possible standbys, so wal_level = minimal skipped it.
But that's not safe, because during crash recovery we might replay
XLOG_DBASE_CREATE or XLOG_TBLSPC_CREATE record which recursively
removes the directory that contains the new init fork. So log it
always.
The user-visible effect of this bug is that if you create a database
or tablespace, then create an unlogged table, then crash without
checkpointing, then restart, accessing the table will fail, because
the it won't have been properly reset. This commit fixes that.
Michael Paquier, per a report from Konstantin Knizhnik. Wording of
the comments per a suggestion from me.
|
|
I found that half a dozen (nearly 5%) of our AllocSetContextCreate calls
had typos in the context-sizing parameters. While none of these led to
especially significant problems, they did create minor inefficiencies,
and it's now clear that expecting people to copy-and-paste those calls
accurately is not a great idea. Let's reduce the risk of future errors
by introducing single macros that encapsulate the common use-cases.
Three such macros are enough to cover all but two special-purpose contexts;
those two calls can be left as-is, I think.
While this patch doesn't in itself improve matters for third-party
extensions, it doesn't break anything for them either, and they can
gradually adopt the simplified notation over time.
In passing, change TopMemoryContext to use the default allocation
parameters. Formerly it could only be extended 8K at a time. That was
probably reasonable when this code was written; but nowadays we create
many more contexts than we did then, so that it's not unusual to have a
couple hundred K in TopMemoryContext, even without considering various
dubious code that sticks other things there. There seems no good reason
not to let it use growing blocks like most other contexts.
Back-patch to 9.6, mostly because that's still close enough to HEAD that
it's easy to do so, and keeping the branches in sync can be expected to
avoid some future back-patching pain. The bugs fixed by these changes
don't seem to be significant enough to justify fixing them further back.
Discussion: <21072.1472321324@sss.pgh.pa.us>
|
|
In blinsert(), cope with the possibility that a page we pull from the
notFullPage list is marked BLOOM_DELETED. This could happen if VACUUM
recently marked it deleted but hasn't (yet) updated the metapage.
We can re-use such a page safely, but we *must* reinitialize it so that
it's no longer marked deleted.
Fix blvacuum() so that it updates the notFullPage list even if it's
going to update it to empty. The previous "optimization" of skipping
the update seems pretty dubious, since it means that the next blinsert()
will uselessly visit whatever pages we left in the list.
Uniformly treat PageIsNew pages the same as deleted pages. This should
allow proper recovery if a crash occurs just after relation extension.
Properly use vacuum_delay_point, not assorted ad-hoc CHECK_FOR_INTERRUPTS
calls, in the blvacuum() main loop.
Fix broken tuple-counting logic: blvacuum.c counted the number of live
index tuples over again in each scan, leading to VACUUM VERBOSE reporting
some multiple of the actual number of surviving index tuples after any
vacuum that removed any tuples (since they'd be counted in blvacuum, maybe
more than once, and then again in blvacuumcleanup, without ever zeroing the
counter). It's sufficient to count them in blvacuumcleanup.
stats->estimated_count is a boolean, not a counter, and we don't want
to set it true, so don't add tuple counts to it.
Add a couple of Asserts that we don't overrun available space on a bloom
page. I don't think there's any bug there today, but the way the
FreeBlockNumberArray size calculation is set up is scarily fragile, and
BloomPageGetFreeSpace isn't much better. The Asserts should help catch
any future mistakes.
Per investigation of a report from Jeff Janes. I think the first item
above may explain his report; the other changes were things I noticed
while casting about for an explanation.
Report: <CAMkU=1xEUuBphDwDmB1WjN4+td4kpnEniFaTBxnk1xzHCw8_OQ@mail.gmail.com>
|
|
|
|
blbuildempty did not do even approximately the right thing: it tried
to add a metapage to the relation's regular data fork, which already
has one at that point. It should look like the ambuildempty methods
for all the standard index types, ie, initialize a metapage image in
some transient storage and then write it directly to the init fork.
To support that, refactor BloomInitMetapage into two functions.
In passing, fix BloomInitMetapage so it doesn't leave the rd_options
field of the index's relcache entry pointing at transient storage.
I'm not sure this had any visible consequence, since nothing much
else is likely to look at a bloom index's rd_options, but it's
certainly poor practice.
Per bug #14155 from Zhou Digoal.
Report: <20160524144146.22598.42558@wrigleys.postgresql.org>
|
|
The reverted changes were intended to force a choice of whether any
newly-added BufferGetPage() calls needed to be accompanied by a
test of the snapshot age, to support the "snapshot too old"
feature. Such an accompanying test is needed in about 7% of the
cases, where the page is being used as part of a scan rather than
positioning for other purposes (such as DML or vacuuming). The
additional effort required for back-patching, and the doubt whether
the intended benefit would really be there, have indicated it is
best just to rely on developers to do the right thing based on
comments and existing usage, as we do with many other conventions.
This change should have little or no effect on generated executable
code.
Motivated by the back-patching pain of Tom Lane and Robert Haas
|
|
Rename this function to GenericXLogRegisterBuffer() to make it clearer
what it does, and leave room for other sorts of "register" actions in
future. Also, replace its "bool isNew" argument with an integer flags
argument, so as to allow adding more flags in future without an API
break.
Alexander Korotkov, adjusted slightly by me
|
|
That routine is dangerous, and unnecessary once we get rid of this
one caller.
In passing, fix failure to clean up temp memory context, or switch
back to caller's context, during slowest exit path.
|
|
This patch is a no-op patch which is intended to reduce the chances
of failures of omission once the functional part of the "snapshot
too old" patch goes in. It adds parameters for snapshot, relation,
and an enum to specify whether the snapshot age check needs to be
done for the page at this point. This initial patch passes NULL
for the first two new parameters and BGP_NO_SNAPSHOT_TEST for the
third. The follow-on patch will change the places where the test
needs to be made.
|
|
Coverity complained about implicit sign-extension in the
BloomPageGetFreeSpace macro, probably because sizeOfBloomTuple isn't wide
enough for size calculations. No overflow is really possible as long as
maxoff and sizeOfBloomTuple are small enough to represent a realistic
situation, but it seems like a good idea to declare sizeOfBloomTuple as
Size not int32.
Add missing check on BloomPageAddItem() result, again from Coverity.
Avoid core dump due to not allocating so->sign array when
scan->numberOfKeys is zero. Also thanks to Coverity.
Use FLEXIBLE_ARRAY_MEMBER rather than declaring an array as size 1
when it isn't necessarily.
Very minor beautification of related code.
Unfortunately, none of the Coverity-detected mistakes look like they
could account for the remaining buildfarm unhappiness with this
module. It's barely possible that the FLEXIBLE_ARRAY_MEMBER mistake
does account for that, if it's enabling bogus compiler optimizations;
but I'm not terribly optimistic. We probably still have bugs to
find here.
|
|
Module provides new access method. It is actually a simple Bloom filter
implemented as pgsql's index. It could give some benefits on search
with large number of columns.
Module is a single way to test generic WAL interface committed earlier.
Author: Teodor Sigaev, Alexander Korotkov
Reviewers: Aleksander Alekseev, Michael Paquier, Jim Nasby
|
