| Age | Commit message (Collapse) | Author |
|---|
|
Backpatch-through: 13
|
|
Reported-by: Michael Paquier
Discussion: https://postgr.es/m/ZZKTDPxBBMt3C0J9@paquier.xyz
Backpatch-through: 12
|
|
The comment
/* On some platforms, readline is declared as readline(char *) */
is obsolete. The casting away of const can be removed.
The const in the readline() prototype was added in GNU readline 4.2,
released in 2001. BSD libedit has also had const in the prototype
since at least 2001.
(The commit that introduced this comment (187e865174) talked about
FreeBSD 4.8, which didn't have readline compatibility in libedit yet,
so it must have been talking about GNU readline in the base system.
This checks out, but already FreeBSD 5 had an updated GNU readline
with const.)
Reviewed-by: Aleksander Alekseev <aleksander@timescale.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/862fc1d4-9a0c-d2b6-5451-ee3dc750bcab%40eisentraut.org
|
|
Backpatch-through: 11
|
|
Per applicable standards, free() with a null pointer is a no-op.
Systems that don't observe that are ancient and no longer relevant.
Some PostgreSQL code already required this behavior, so this change
does not introduce any new requirements, just makes the code more
consistent.
Discussion: https://www.postgresql.org/message-id/flat/dac5d2d0-98f5-94d9-8e69-46da2413593d%40enterprisedb.com
|
|
Backpatch-through: 10
|
|
Some exceedingly ancient readline libraries lack this function, causing
commit 3d858af07 to fail. Per buildfarm (via Michael Paquier).
Discussion: https://postgr.es/m/E1msTLm-0007Cm-Ri@gemulon.postgresql.org
|
|
Readline's meta-# command is supposed to insert a comment marker
at the start of the current line. However, the default marker is
"#" which is entirely unhelpful for SQL. Set it to "-- " instead.
(This setting can still be overridden in one's ~/.inputrc file,
so this change won't affect people who have already taken steps
to make the command useful.)
Discussion: https://postgr.es/m/CAJcOf-cAdMVr7azeYR7nWKsNp7qhORzc84rV6d7m7knG5Hrtsw@mail.gmail.com
|
|
Backpatch-through: 9.5
|
|
Backpatch-through: update all files in master, backpatch legal files through 9.4
|
|
Similar to commit 7e735035f2, this commit makes the order of header file
inclusion consistent for non-backend modules.
In passing, fix the case where we were using angle brackets (<>) for the
local module includes instead of quotes ("").
Author: Vignesh C
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/CALDaNm2Sznv8RR6Ex-iJO6xAdsxgWhCoETkaYX=+9DW3q0QCfA@mail.gmail.com
|
|
The original placement of this module in src/fe_utils/ is ill-considered,
because several src/common/ modules have dependencies on it, meaning that
libpgcommon and libpgfeutils now have mutual dependencies. That makes it
pointless to have distinct libraries at all. The intended design is that
libpgcommon is lower-level than libpgfeutils, so only dependencies from
the latter to the former are acceptable.
We already have the precedent that fe_memutils and a couple of other
modules in src/common/ are frontend-only, so it's not stretching anything
out of whack to treat logging.c as a frontend-only module in src/common/.
To the extent that such modules help provide a common frontend/backend
environment for the rest of common/ to use, it's a reasonable design.
(logging.c does not yet provide an ereport() emulation, but one can
dream.)
Hence, move these files over, and revert basically all of the build-system
changes made by commit cc8d41511. There are no places that need to grow
new dependencies on libpgcommon, further reinforcing the idea that this
is the right solution.
Discussion: https://postgr.es/m/a912ffff-f6e4-778a-c86a-cf5c47a12933@2ndquadrant.com
|
|
This unifies the various ad hoc logging (message printing, error
printing) systems used throughout the command-line programs.
Features:
- Program name is automatically prefixed.
- Message string does not end with newline. This removes a common
source of inconsistencies and omissions.
- Additionally, a final newline is automatically stripped, simplifying
use of PQerrorMessage() etc., another common source of mistakes.
- I converted error message strings to use %m where possible.
- As a result of the above several points, more translatable message
strings can be shared between different components and between
frontends and backend, without gratuitous punctuation or whitespace
differences.
- There is support for setting a "log level". This is not meant to be
user-facing, but can be used internally to implement debug or
verbose modes.
- Lazy argument evaluation, so no significant overhead if logging at
some level is disabled.
- Some color in the messages, similar to gcc and clang. Set
PG_COLOR=auto to try it out. Some colors are predefined, but can be
customized by setting PG_COLORS.
- Common files (common/, fe_utils/, etc.) can handle logging much more
simply by just using one API without worrying too much about the
context of the calling program, requiring callbacks, or having to
pass "progname" around everywhere.
- Some programs called setvbuf() to make sure that stderr is
unbuffered, even on Windows. But not all programs did that. This
is now done centrally.
Soft goals:
- Reduces vertical space use and visual complexity of error reporting
in the source code.
- Encourages more deliberate classification of messages. For example,
in some cases it wasn't clear without analyzing the surrounding code
whether a message was meant as an error or just an info.
- Concepts and terms are vaguely aligned with popular logging
frameworks such as log4j and Python logging.
This is all just about printing stuff out. Nothing affects program
flow (e.g., fatal exits). The uses are just too varied to do that.
Some existing code had wrappers that do some kind of print-and-exit,
and I adapted those.
I tried to keep the output mostly the same, but there is a lot of
historical baggage to unwind and special cases to consider, and I
might not always have succeeded. One significant change is that
pg_rewind used to write all error messages to stdout. That is now
changed to stderr.
Reviewed-by: Donald Dong <xdong@csumb.edu>
Reviewed-by: Arthur Zakirov <a.zakirov@postgrespro.ru>
Discussion: https://www.postgresql.org/message-id/flat/6a609b43-4f57-7348-6480-bd022f924310@2ndquadrant.com
|
|
Backpatch-through: certain files through 9.4
|
|
Backpatch-through: certain files through 9.3
|
|
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4dd0dad0dd9eea4be9cc1412373a8c89 wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
|
|
Modify FETCH_COUNT to always have a defined value, like other control
variables, mainly so it will always appear in "\set" output.
Add hooks to force HISTSIZE to be defined and require it to have an
integer value. (I don't see any point in allowing it to be set to
non-integral values.)
Add hooks to force IGNOREEOF to be defined and require it to have an
integer value. Unlike the other cases, here we're trying to be
bug-compatible with a rather bogus externally-defined behavior, so I think
we need to continue to allow "\set IGNOREEOF whatever". Fix it so that
the substitution hook silently replace non-numeric values with "10",
so that the stored value always reflects what we're really doing.
Add a dummy assign hook for HISTFILE, just so it's always in
variables.c's list. We can't require it to be defined always, because
that would break the interaction with the PSQL_HISTORY environment
variable, so there isn't any change in visible behavior here.
Remove tab-complete.c's private list of known variable names, since that's
really a maintenance nuisance. Given the preceding changes, there are no
control variables it won't show anyway. This does mean that if for some
reason you've unset one of the status variables (DBNAME, HOST, etc), that
variable would not appear in tab completion for \set. But I think that's
fine, for at least two reasons: we shouldn't be encouraging people to use
those variables as regular variables, and if someone does do so anyway,
why shouldn't it act just like a regular variable?
Remove ugly and no-longer-used-anywhere GetVariableNum(). In general,
future additions of integer-valued control variables should follow the
paradigm of adding an assign hook using ParseVariableNum(), so there's
no reason to expect we'd need this again later.
Discussion: https://postgr.es/m/17516.1485973973@sss.pgh.pa.us
|
|
Previously, if the user set a special variable such as ECHO to an
unrecognized value, psql would bleat but store the new value anyway, and
then fall back to a default setting for the behavior controlled by the
variable. This was agreed to be a not particularly good idea. With
this patch, invalid values result in an error message and no change in
state.
(But this applies only to variables that affect psql's behavior; purely
informational variables such as ENCODING can still be set to random
values.)
To do this, modify the API for psql's assign-hook functions so that they
can return an OK/not OK result, and give them the responsibility for
printing error messages when they reject a value. Adjust the APIs for
ParseVariableBool and ParseVariableNum to support the new behavior
conveniently.
In passing, document the variable VERSION, which had somehow escaped that.
And improve the quite-inadequate commenting in psql/variables.c.
Daniel Vérité, reviewed by Rahila Syed, some further tweaking by me
Discussion: https://postgr.es/m/7356e741-fa59-4146-a8eb-cf95fd6b21fb@mm
|
|
|
|
We weren't terribly consistent about whether to call Apple's OS "OS X"
or "Mac OS X", and the former is probably confusing to people who aren't
Apple users. Now that Apple has rebranded it "macOS", follow their lead
to establish a consistent naming pattern. Also, avoid the use of the
ancient project name "Darwin", except as the port code name which does not
seem desirable to change. (In short, this patch touches documentation and
comments, but no actual code.)
I didn't touch contrib/start-scripts/osx/, either. I suspect those are
obsolete and due for a rewrite, anyway.
I dithered about whether to apply this edit to old release notes, but
those were responsible for quite a lot of the inconsistencies, so I ended
up changing them too. Anyway, Apple's being ahistorical about this,
so why shouldn't we be?
|
|
Per the fgets() specification, it cannot return without reading some data
unless it reports EOF or error. So the code here assumed that the data
buffer would necessarily be nonempty when we go to check for a newline
having been read. However, Agostino Sarubbo noticed that this could fail
to be true if the first byte of the data is a NUL (\0). The fgets() API
doesn't really work for embedded NULs, which is something I don't feel
any great need for us to worry about since we generally don't allow NULs
in SQL strings anyway. But we should not access off the end of our own
buffer if the case occurs. Normally this would just be a harmless read,
but if you were unlucky the byte before the buffer would contain '\n'
and we'd overwrite it with '\0', and if you were really unlucky that
might be valuable data and psql would crash.
Agostino reported this to pgsql-security, but after discussion we concluded
that it isn't worth treating as a security bug; if you can control the
input to psql you can do far more interesting things than just maybe-crash
it. Nonetheless, it is a bug, so back-patch to all supported versions.
|
|
Backpatch certain files through 9.1
|
|
Up to now, the tab completion logic has only examined the last few words
of the current input line; "last few" being originally as few as four
words, but lately up to nine words. Furthermore, it only looked at what
libreadline considers the current line of input, which made it rather
myopic if you split your command across lines. This was tolerable,
sort of, so long as the match patterns were only designed to consider the
last few words of input; but with the recent addition of HeadMatches()
and Matches() matching rules, we really have to do better if we want
those to behave sanely.
Hence, change the code to break the entire line down into words, and to
include any previous lines in the command buffer along with the active
readline input buffer.
This will be a little bit slower than the previous coding, but some
measurements say that even a query of several thousand characters can be
parsed in a hundred or so microseconds on modern machines; so it's really
not going to be significant for interactive tab completion. To reduce
the cost some, I arranged to avoid the per-word malloc calls that used
to occur: all the words are now kept in one malloc'd buffer.
|
|
Turns out we must set rl_basic_word_break_characters *before* we call
rl_initialize() the first time, because it will quietly copy that value
elsewhere --- but only on the first call. (Love these undocumented
dependencies.) I broke this yesterday in commit 2ec477dc8108339d;
like that commit, back-patch to all active branches. Per report from
Pavel Stehule.
|
|
It emerges that libreadline doesn't notice terminal window size change
events unless they occur while collecting input. This is easy to stumble
over if you resize the window while using a pager to look at query output,
but it can be demonstrated without any pager involvement. The symptom is
that queries exceeding one line are misdisplayed during subsequent input
cycles, because libreadline has the wrong idea of the screen dimensions.
The safest, simplest way to fix this is to call rl_reset_screen_size()
just before calling readline(). That causes an extra ioctl(TIOCGWINSZ)
for every command; but since it only happens when reading from a tty, the
performance impact should be negligible. A more valid objection is that
this still leaves a tiny window during entry to readline() wherein delivery
of SIGWINCH will be missed; but the practical consequences of that are
probably negligible. In any case, there doesn't seem to be any good way to
avoid the race, since readline exposes no functions that seem safe to call
from a generic signal handler --- rl_reset_screen_size() certainly isn't.
It turns out that we also need an explicit rl_initialize() call, else
rl_reset_screen_size() dumps core when called before the first readline()
call.
rl_reset_screen_size() is not present in old versions of libreadline,
so we need a configure test for that. (rl_initialize() is present at
least back to readline 4.0, so we won't bother with a test for it.)
We would need a configure test anyway since libedit's emulation of
libreadline doesn't currently include such a function. Fortunately,
libedit seems not to have any corresponding bug.
Merlin Moncure, adjusted a bit by me
|
|
Backpatch to all live branches to keep the code in sync.
|
|
If set, the pager will not be used unless this many lines are to be
displayed, even if that is more than the screen depth. Default is zero,
meaning it's disabled.
There is probably more work to be done in giving the user control over
when the pager is used, particularly when wide output forces use of the
pager regardless of how many lines there are, but this is a start.
|
|
GNU readline defines the return value of write_history() as "zero if OK,
else an errno code". libedit's version of that function used to have a
different definition (to wit, "-1 if error, else the number of lines
written to the file"). We tried to work around that by checking whether
errno had become nonzero, but this method has never been kosher according
to the published API of either library. It's reportedly completely broken
in recent Ubuntu releases: psql bleats about "No such file or directory"
when saving ~/.psql_history, even though the write worked fine.
However, libedit has been following the readline definition since somewhere
around 2006, so it seems all right to finally break compatibility with
ancient libedit releases and trust that the return value is what readline
specifies. (I'm not sure when the various Linux distributions incorporated
this fix, but I did find that OS X has been shipping fixed versions since
10.5/Leopard.)
If anyone is still using such an ancient libedit, they will find that psql
complains it can't write ~/.psql_history at exit, even when the file was
written correctly. This is no worse than the behavior we're fixing for
current releases.
Back-patch to all supported branches.
|
|
Backpatch certain files through 9.0
|
|
psql's \s (print command history) doesn't work at all with recent libedit
versions when printing to the terminal, because libedit tries to do an
fchmod() on the target file which will fail if the target is /dev/tty.
(We'd already noted this in the context of the target being /dev/null.)
Even before that, it didn't work pleasantly, because libedit likes to
encode the command history file (to ensure successful reloading), which
renders it nigh unreadable, not to mention significantly different-looking
depending on exactly which libedit version you have. So let's forget using
write_history() for this purpose, and instead print the data ourselves,
using logic similar to that used to iterate over the history for newline
encoding/decoding purposes.
While we're at it, insert the ability to use the pager when \s is printing
to the terminal. This has been an acknowledged shortcoming of \s for many
years, so while you could argue it's not exactly a back-patchable bug fix
it still seems like a good improvement. Anyone who's seriously annoyed
at this can use "\s /dev/tty" or local equivalent to get the old behavior.
Experimentation with this showed that the history iteration logic was
actually rather broken when used with libedit. It turns out that with
libedit you have to use previous_history() not next_history() to advance
to more recent history entries. The easiest and most robust fix for this
seems to be to make a run-time test to verify which function to call.
We had not noticed this because libedit doesn't really need the newline
encoding logic: its own encoding ensures that command entries containing
newlines are reloaded correctly (unlike libreadline). So the effective
behavior with recent libedits was that only the oldest history entry got
newline-encoded or newline-decoded. However, because of yet other bugs in
history_set_pos(), some old versions of libedit allowed the existing loop
logic to reach entries besides the oldest, which means there may be libedit
~/.psql_history files out there containing encoded newlines in more than
just the oldest entry. To ensure we can reload such files, it seems
appropriate to back-patch this fix, even though that will result in some
incompatibility with older psql versions (ie, multiline history entries
written by a psql with this fix will look corrupted to a psql without it,
if its libedit is reasonably up to date).
Stepan Rutz and Tom Lane
|
|
This includes removing tabs after periods in C comments, which was
applied to back branches, so this change should not effect backpatching.
|
|
Update all files in head, and files COPYRIGHT and legal.sgml in all back
branches.
|
|
This eliminates an awkward coding pattern that's also unnecessarily
inconsistent with backend coding. psprintf() is now the thing to
use everywhere.
|
|
Add asprintf(), pg_asprintf(), and psprintf() to simplify string
allocation and composition. Replacement implementations taken from
NetBSD.
Reviewed-by: Álvaro Herrera <alvherre@2ndquadrant.com>
Reviewed-by: Asif Naeem <anaeem.it@gmail.com>
|
|
Fully update git head, and update back branches in ./COPYRIGHT and
legal.sgml files.
|
|
commit-fest.
|
|
PSQL_HISTORY provides an alternative for the command history file,
and PSQLRC provides an alternative location for the .psqlrc file.
|
|
|
|
All supported platforms support the C89 standard function atexit()
(SunOS 4 probably being the last one not to), and supporting both
makes the code clumsy.
|
|
This can change the meaning of queries, if the blank line happens to
occur in the middle of a quoted literal, as per complaint from Tomas Vondra.
Back-patch to all supported branches.
|
|
|
|
|
|
|
|
|
|
append_history(), if libreadline is new enough to have those functions
(they seem to be present at least since 4.2; but libedit may not have them).
This gives significantly saner behavior when two or more sessions overlap in
their use of the history file; although having two sessions exit at just the
same time is still perilous to your history. The behavior of \s remains
unchanged, ie, overwrite whatever was there.
Per bug #5052 from Marek Wójtowicz.
|
|
|
|
results (ie, an empty "broken" buffer) if memory overrun occurs anywhere
along the way to filling the buffer. The previous coding would just silently
discard portions of the intended buffer contents, as exhibited in trouble
report from Sam Mason. Also, tweak psql's main loop to correctly detect
and report such overruns. There's probably much more that should be done
in this line, but this is a start.
|
|
|
|
|
|
back-stamped for this.
|
