| Age | Commit message (Collapse) | Author |
|---|
|
Backpatch-through: 13
|
|
More precisely, what we do here is make the SLRU cache sizes
configurable with new GUCs, so that sites with high concurrency and big
ranges of transactions in flight (resp. multixacts/subtransactions) can
benefit from bigger caches. In order for this to work with good
performance, two additional changes are made:
1. the cache is divided in "banks" (to borrow terminology from CPU
caches), and algorithms such as eviction buffer search only affect
one specific bank. This forestalls the problem that linear searching
for a specific buffer across the whole cache takes too long: we only
have to search the specific bank, whose size is small. This work is
authored by Andrey Borodin.
2. Change the locking regime for the SLRU banks, so that each bank uses
a separate LWLock. This allows for increased scalability. This work
is authored by Dilip Kumar. (A part of this was previously committed as
d172b717c6f4.)
Special care is taken so that the algorithms that can potentially
traverse more than one bank release one bank's lock before acquiring the
next. This should happen rarely, but particularly clog.c's group commit
feature needed code adjustment to cope with this. I (Álvaro) also added
lots of comments to make sure the design is sound.
The new GUCs match the names introduced by bcdfa5f2e2f2 in the
pg_stat_slru view.
The default values for these parameters are similar to the previous
sizes of each SLRU. commit_ts, clog and subtrans accept value 0, which
means to adjust by dividing shared_buffers by 512 (so 2MB for every 1GB
of shared_buffers), with a cap of 8MB. (A new slru.c function
SimpleLruAutotuneBuffers() was added to support this.) The cap was
previously 1MB for clog, so for sites with more than 512MB of shared
memory the total memory used increases, which is likely a good tradeoff.
However, other SLRUs (notably multixact ones) retain smaller sizes and
don't support a configured value of 0. These values based on
shared_buffers may need to be revisited, but that's an easy change.
There was some resistance to adding these new GUCs: it would be better
to adjust to memory pressure automatically somehow, for example by
stealing memory from shared_buffers (where the caches can grow and
shrink naturally). However, doing that seems to be a much larger
project and one which has made virtually no progress in several years,
and because this is such a pain point for so many users, here we take
the pragmatic approach.
Author: Andrey Borodin <x4mmm@yandex-team.ru>
Author: Dilip Kumar <dilipbalaut@gmail.com>
Reviewed-by: Amul Sul, Gilles Darold, Anastasia Lubennikova,
Ivan Lazarev, Robert Haas, Thomas Munro, Tomas Vondra,
Yura Sokolov, Васильев Дмитрий (Dmitry Vasiliev).
Discussion: https://postgr.es/m/2BEC2B3F-9B61-4C1D-9FB5-5FAB0F05EF86@yandex-team.ru
Discussion: https://postgr.es/m/CAFiTN-vzDvNz=ExGXz6gdyjtzGixKSqs0mKHMmaQ8sOSEFZ33A@mail.gmail.com
|
|
Reported-by: Michael Paquier
Discussion: https://postgr.es/m/ZZKTDPxBBMt3C0J9@paquier.xyz
Backpatch-through: 12
|
|
This avoids the wraparound in async.c and removes the corresponding code
complexity. The maximum amount of allocated SLRU pages for NOTIFY / LISTEN
queue is now determined by the max_notify_queue_pages GUC. The default
value is 1048576. It allows to consume up to 8 GB of disk space which is
exactly the limit we had previously.
Author: Maxim Orlov, Aleksander Alekseev, Alexander Korotkov, Teodor Sigaev
Author: Nikita Glukhov, Pavel Borisov, Yura Sokolov
Reviewed-by: Jacob Champion, Heikki Linnakangas, Alexander Korotkov
Reviewed-by: Japin Li, Pavel Borisov, Tom Lane, Peter Eisentraut, Andres Freund
Reviewed-by: Andrey Borodin, Dilip Kumar, Aleksander Alekseev
Discussion: https://postgr.es/m/CACG%3DezZe1NQSCnfHOr78AtAZxJZeCvxrts0ygrxYwe%3DpyyjVWA%40mail.gmail.com
Discussion: https://postgr.es/m/CAJ7c6TPDOYBYrnCAeyndkBktO0WG2xSdYduTF0nxq%2BvfkmTF5Q%40mail.gmail.com
|
|
Backpatch-through: 11
|
|
Up until now, we've had a policy of only marking certain variables
in the PostgreSQL header files with PGDLLIMPORT, but now we've
decided to mark them all. This means that extensions running on
Windows should no longer operate at a disadvantage as compared to
extensions running on Linux: if the variable is present in a header
file, it should be accessible.
Discussion: http://postgr.es/m/CA+TgmoYanc1_FSfimhgiWSqVyP5KKmh5NP2BWNwDhO8Pg2vGYQ@mail.gmail.com
|
|
Backpatch-through: 10
|
|
Formerly, we sent signals for outgoing NOTIFY messages within
ProcessCompletedNotifies, which was also responsible for sending
relevant ones of those messages to our connected client. It therefore
had to run during the main-loop processing that occurs just before
going idle. This arrangement had two big disadvantages:
* Now that procedures allow intra-command COMMITs, it would be
useful to send NOTIFYs to other sessions immediately at COMMIT
(though, for reasons of wire-protocol stability, we still shouldn't
forward them to our client until end of command).
* Background processes such as replication workers would not send
NOTIFYs at all, since they never execute the client communication
loop. We've had requests to allow triggers running in replication
workers to send NOTIFYs, so that's a problem.
To fix these things, move transmission of outgoing NOTIFY signals
into AtCommit_Notify, where it will happen during CommitTransaction.
Also move the possible call of asyncQueueAdvanceTail there, to
ensure we don't bloat the async SLRU if a background worker sends
many NOTIFYs with no one listening.
We can also drop the call of asyncQueueReadAllNotifications,
allowing ProcessCompletedNotifies to go away entirely. That's
because commit 790026972 added a call of ProcessNotifyInterrupt
adjacent to PostgresMain's call of ProcessCompletedNotifies,
and that does its own call of asyncQueueReadAllNotifications,
meaning that we were uselessly doing two such calls (inside two
separate transactions) whenever inbound notify signals coincided
with an outbound notify. We need only set notifyInterruptPending
to ensure that ProcessNotifyInterrupt runs, and we're done.
The existing documentation suggests that custom background workers
should call ProcessCompletedNotifies if they want to send NOTIFY
messages. To avoid an ABI break in the back branches, reduce it
to an empty routine rather than removing it entirely. Removal
will occur in v15.
Although the problems mentioned above have existed for awhile,
I don't feel comfortable back-patching this any further than v13.
There was quite a bit of churn in adjacent code between 12 and 13.
At minimum we'd have to also backpatch 51004c717, and a good deal
of other adjustment would also be needed, so the benefit-to-risk
ratio doesn't look attractive.
Per bug #15293 from Michael Powers (and similar gripes from others).
Artur Zakirov and Tom Lane
Discussion: https://postgr.es/m/153243441449.1404.2274116228506175596@wrigleys.postgresql.org
|
|
Backpatch-through: 9.5
|
|
Originally, the names assigned to SLRUs had no purpose other than
being shmem lookup keys, so not a lot of thought went into them.
As of v13, though, we're exposing them in the pg_stat_slru view and
the pg_stat_reset_slru function, so it seems advisable to take a bit
more care. Rename them to names based on the associated on-disk
storage directories (which fortunately we *did* think about, to some
extent; since those are also visible to DBAs, consistency seems like
a good thing). Also rename the associated LWLocks, since those names
are likewise user-exposed now as wait event names.
For the most part I only touched symbols used in the respective modules'
SimpleLruInit() calls, not the names of other related objects. This
renaming could have been taken further, and maybe someday we will do so.
But for now it seems undesirable to change the names of any globally
visible functions or structs, so some inconsistency is unavoidable.
(But I *did* terminate "oldserxid" with prejudice, as I found that
name both unreadable and not descriptive of the SLRU's contents.)
Table 27.12 needs re-alphabetization now, but I'll leave that till
after the other LWLock renamings I have in mind.
Discussion: https://postgr.es/m/28683.1589405363@sss.pgh.pa.us
|
|
Backpatch-through: update all files in master, backpatch legal files through 9.4
|
|
Allocate notify-related state lazily instead. This makes trivial
subtransactions noticeably faster.
Patch by me, reviewed and tested by Dilip Kumar, Kyotaro Horiguchi,
and Jeevan Ladhe.
Discussion: https://postgr.es/m/CA+TgmobE1J22S1eC-6N-je9LgrcwZypkwp+zH6JXo9mc=4Nk3A@mail.gmail.com
|
|
Most of the fmgr.h includes were obsoleted by 352a24a1f9d6f7d4abb1. A
few others can be obsoleted using the underlying struct type in an
implementation detail.
Author: Andres Freund
Discussion: https://postgr.es/m/20190803193733.g3l3x3o42uv4qj7l@alap3.anarazel.de
|
|
Switch to 2.1 version of pg_bsd_indent. This formats
multiline function declarations "correctly", that is with
additional lines of parameter declarations indented to match
where the first line's left parenthesis is.
Discussion: https://postgr.es/m/CAEepm=0P3FeTXRcU5B2W3jv3PgRVZ-kGUXLGfd42FFhUROO3ug@mail.gmail.com
|
|
Backpatch-through: certain files through 9.4
|
|
Backpatch-through: certain files through 9.3
|
|
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4dd0dad0dd9eea4be9cc1412373a8c89 wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
|
|
Gen_fmgrtab.pl creates a new file fmgrprotos.h, which contains
prototypes for all functions registered in pg_proc.h. This avoids
having to manually maintain these prototypes across a random variety of
header files. It also automatically enforces a correct function
signature, and since there are warnings about missing prototypes, it
will detect functions that are defined but not registered in
pg_proc.h (or otherwise used).
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
|
|
|
|
|
|
Previously, workers sent data to the leader using the client encoding.
That mostly worked, but the leader the converted the data back to the
server encoding. Since not all encoding conversions are reversible,
that could provoke failures. Fix by using the database encoding for
all communication between worker and leader.
Also, while temporary changes to GUC settings, as from the SET clause
of a function, are in general OK for parallel query, changing
client_encoding this way inside of a parallel worker is not OK.
Previously, that would have confused the leader; with these changes,
it would not confuse the leader, but it wouldn't do anything either.
So refuse such changes in parallel workers.
Also, the previous code naively assumed that when it received a
NotifyResonse from the worker, it could pass that directly back to the
user. But now that worker-to-leader communication always uses the
database encoding, that's clearly no longer correct - though,
actually, the old way was always broken for V2 clients. So
disassemble and reconstitute the message instead.
Issues reported by Peter Eisentraut. Patch by me, reviewed by
Peter Eisentraut.
|
|
Backpatch certain files through 9.1
|
|
This tells you what fraction of NOTIFY's queue is currently filled.
Brendan Jurd, reviewed by Merlin Moncure and Gurjeet Singh. A few
further tweaks by me.
|
|
Up to now large swathes of backend code ran inside signal handlers
while reading commands from the client, to allow for speedy reaction to
asynchronous events. Most prominently shared invalidation and NOTIFY
handling. That means that complex code like the starting/stopping of
transactions is run in signal handlers... The required code was
fragile and verbose, and is likely to contain bugs.
That approach also severely limited what could be done while
communicating with the client. As the read might be from within
openssl it wasn't safely possible to trigger an error, e.g. to cancel
a backend in idle-in-transaction state. We did that in some cases,
namely fatal errors, nonetheless.
Now that FE/BE communication in the backend employs non-blocking
sockets and latches to block, we can quite simply interrupt reads from
signal handlers by setting the latch. That allows us to signal an
interrupted read, which is supposed to be retried after returning from
within the ssl library.
As signal handlers now only need to set the latch to guarantee timely
interrupt processing, remove a fair amount of complicated & fragile
code from async.c and sinval.c.
We could now actually start to process some kinds of interrupts, like
sinval ones, more often that before, but that seems better done
separately.
This work will hopefully allow to handle cases like being blocked by
sending data, interrupting idle transactions and similar to be
implemented without too much effort. In addition to allowing getting
rid of ImmediateInterruptOK, that is.
Author: Andres Freund
Reviewed-By: Heikki Linnakangas
|
|
Backpatch certain files through 9.0
|
|
Update all files in head, and files COPYRIGHT and legal.sgml in all back
branches.
|
|
Fully update git head, and update back branches in ./COPYRIGHT and
legal.sgml files.
|
|
|
|
|
|
|
|
In addition, add support for a "payload" string to be passed along with
each notify event.
This implementation should be significantly more efficient than the old one,
and is also more compatible with Hot Standby usage. There is not yet any
facility for HS slaves to receive notifications generated on the master,
although such a thing is possible in future.
Joachim Wieland, reviewed by Jeff Davis; also hacked on by me.
|
|
|
|
This patch gets us out from under the Unix limitation of two user-defined
signal types. We already had done something similar for signals directed to
the postmaster process; this adds multiplexing for signals directed to
backends and auxiliary processes (so long as they're connected to shared
memory).
As proof of concept, replace the former usage of SIGUSR1 and SIGUSR2
for backends with use of the multiplexing mechanism. There are still some
hard-wired definitions of SIGUSR1 and SIGUSR2 for other process types,
but getting rid of those doesn't seem interesting at the moment.
Fujii Masao
|
|
|
|
|
|
reviewed by Neil Conway. This patch adds the following DDL command
variants: RESET SESSION, RESET TEMP, RESET PLANS, CLOSE ALL, and
DEALLOCATE ALL. RESET SESSION is intended for use by connection
pool software and the like, in order to reset a client session
to something close to its initial state.
Note that while most of these command variants can be executed
inside a transaction block (but are not transaction-aware!),
RESET SESSION cannot. While this is inconsistent, it is intended
to catch programmer mistakes: RESET SESSION in an open transaction
block is probably unintended.
|
|
back-stamped for this.
|
|
|
|
Hans-J?rgen Sch?nig
|
|
|
|
|
|
current backend in pg_listener, so there is little point in making
the PID to register part of async.c's public API. Other minor tweaks.
|
|
hacking by Alvaro Herrera and Tom Lane.
|
|
Also performed an initial run through of upgrading our Copyright date to
extend to 2005 ... first run here was very simple ... change everything
where: grep 1996-2004 && the word 'Copyright' ... scanned through the
generated list with 'less' first, and after, to make sure that I only
picked up the right entries ...
|
|
|
|
performance front, but with feature freeze upon us I think it's time to
drive a stake in the ground and say that this will be in 7.5.
Alvaro Herrera, with some help from Tom Lane.
|
|
(SIGUSR1, which we have not been using recently) instead of piggybacking
on SIGUSR2-driven NOTIFY processing. This has several good results:
the processing needed to drain the sinval queue is a lot less than the
processing needed to answer a NOTIFY; there's less contention since we
don't have a bunch of backends all trying to acquire exclusive lock on
pg_listener; backends that are sitting inside a transaction block can
still drain the queue, whereas NOTIFY processing can't run if there's
an open transaction block. (This last is a fairly serious issue that
I don't think we ever recognized before --- with clients like JDBC that
tend to sit with open transaction blocks, the sinval queue draining
mechanism never really worked as intended, probably resulting in a lot
of useless cache-reset overhead.) This is the last of several proposed
changes in response to Philip Warner's recent report of sinval-induced
performance problems.
|
|
|
|
|
|
|
