| Age | Commit message (Collapse) | Author |
|---|
|
Due to concerns raised about the approach, and memory leaks found
in sensitive contexts the functionality is reverted. This reverts
commits 45e7e8ca9, f8c115a6c, d2a1ed172, 55ef7abf8 and 042a66291
for v18 with an intent to revisit this patch for v19.
Discussion: https://postgr.es/m/594293.1747708165@sss.pgh.pa.us
|
|
A 'void *' argument suggests that the caller might pass an arbitrary
struct, which is appropriate for functions like libc's read/write, or
pq_sendbytes(). 'uint8 *' is more appropriate for byte arrays that
have no structure, like the cancellation keys or SCRAM tokens. Some
places used 'char *', but 'uint8 *' is better because 'char *' is
commonly used for null-terminated strings. Change code around SCRAM,
MD5 authentication, and cancellation key handling to follow these
conventions.
Discussion: https://www.postgresql.org/message-id/61be9e31-7b7d-49d5-bc11-721800d89d64@eisentraut.org
|
|
IO workers are treated as auxiliary processes. The comments fixed in
this commit stated that there could be only one auxiliary process of
each BackendType at the same time. This is not true for IO workers, as
up to MAX_IO_WORKERS of them can co-exist at the same time.
Author: Cédric Villemain <Cedric.Villemain@data-bene.io>
Co-authored-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/e4a3ac45-abce-4b58-a043-b4a31cd11113@Data-Bene.io
|
|
Change MyCancelKeyLength's type from uint8 to int. While it always
fits in a uint8, plain int is less surprising, as there's no
particular reason for it to be uint8.
Fix one ProcSignalInit caller that passed 'false' instead of NULL for
the pointer argument.
Author: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://www.postgresql.org/message-id/61be9e31-7b7d-49d5-bc11-721800d89d64@eisentraut.org
|
|
This adds a function for retrieving memory context statistics
and information from backends as well as auxiliary processes.
The intended usecase is cluster debugging when under memory
pressure or unanticipated memory usage characteristics.
When calling the function it sends a signal to the specified
process to submit statistics regarding its memory contexts
into dynamic shared memory. Each memory context is returned
in detail, followed by a cumulative total in case the number
of contexts exceed the max allocated amount of shared memory.
Each process is limited to use at most 1Mb memory for this.
A summary can also be explicitly requested by the user, this
will return the TopMemoryContext and a cumulative total of
all lower contexts.
In order to not block on busy processes the caller specifies
the number of seconds during which to retry before timing out.
In the case where no statistics are published within the set
timeout, the last known statistics are returned, or NULL if
no previously published statistics exist. This allows dash-
board type queries to continually publish even if the target
process is temporarily congested. Context records contain a
timestamp to indicate when they were submitted.
Author: Rahila Syed <rahilasyed90@gmail.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Tomas Vondra <tomas@vondra.me>
Reviewed-by: Atsushi Torikoshi <torikoshia@oss.nttdata.com>
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Alexander Korotkov <aekorotkov@gmail.com>
Discussion: https://postgr.es/m/CAH2L28v8mc9HDt8QoSJ8TRmKau_8FM_HKS41NeO9-6ZAkuZKXw@mail.gmail.com
|
|
Currently, the cancel request key is a 32-bit token, which isn't very
much entropy. If you want to cancel another session's query, you can
brute-force it. In most environments, an unauthorized cancellation of
a query isn't very serious, but it nevertheless would be nice to have
more protection from it. Hence make the key longer, to make it harder
to guess.
The longer cancellation keys are generated when using the new protocol
version 3.2. For connections using version 3.0, short 4-bytes keys are
still used.
The new longer key length is not hardcoded in the protocol anymore,
the client is expected to deal with variable length keys, up to 256
bytes. This flexibility allows e.g. a connection pooler to add more
information to the cancel key, which might be useful for finding the
connection.
Reviewed-by: Jelte Fennema-Nio <postgres@jeltef.nl>
Reviewed-by: Robert Haas <robertmhaas@gmail.com> (earlier versions)
Discussion: https://www.postgresql.org/message-id/508d0505-8b7a-4864-a681-e7e5edfe32aa@iki.fi
|
|
This commit contains the basic, system-wide, infrastructure for
io_method=worker. It does not yet actually execute IO, this commit just
provides the infrastructure for running IO workers, kept separate for easier
review.
The number of IO workers can be adjusted with a PGC_SIGHUP GUC. Eventually
we'd like to make the number of workers dynamically scale up/down based on the
current "IO load".
To allow the number of IO workers to be increased without a restart, we need
to reserve PGPROC entries for the workers unconditionally. This has been
judged to be worth the cost. If it turns out to be problematic, we can
introduce a PGC_POSTMASTER GUC to control the maximum number.
As io workers might be needed during shutdown, e.g. for AIO during the
shutdown checkpoint, a new PMState phase is added. IO workers are shut down
after the shutdown checkpoint has been performed and walsender/archiver have
shut down, but before the checkpointer itself shuts down. See also
87a6690cc69.
Updates PGSTAT_FILE_FORMAT_ID due to the addition of a new BackendType.
Reviewed-by: Noah Misch <noah@leadboat.com>
Co-authored-by: Thomas Munro <thomas.munro@gmail.com>
Co-authored-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/uvrtrknj4kdytuboidbhwclo4gxhswwcpgadptsjvjqcluzmah%40brqs62irg4dt
Discussion: https://postgr.es/m/20210223100344.llw5an2aklengrmn@alap3.anarazel.de
Discussion: https://postgr.es/m/stj36ea6yyhoxtqkhpieia2z4krnam7qyetc57rfezgk4zgapf@gcnactj4z56m
|
|
Add log_connections option 'setup_durations' which logs durations of
several key parts of connection establishment and backend setup.
For an incoming connection, starting from when the postmaster gets a
socket from accept() and ending when the forked child backend is first
ready for query, there are multiple steps that could each take longer
than expected due to external factors. This logging provides visibility
into authentication and fork duration as well as the end-to-end
connection establishment and backend initialization time.
To make this portable, the timings captured in the postmaster (socket
creation time, fork initiation time) are passed through the
BackendStartupData.
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Jacob Champion <jacob.champion@enterprisedb.com>
Reviewed-by: Jelte Fennema-Nio <postgres@jeltef.nl>
Reviewed-by: Guillaume Lelarge <guillaume.lelarge@dalibo.com>
Discussion: https://postgr.es/m/flat/CAAKRu_b_smAHK0ZjrnL5GRxnAVWujEXQWpLXYzGbmpcZd3nLYw%40mail.gmail.com
|
|
This change adapts these functions to the machine's address width
without depending on "long" to be the right size. (It isn't on
Win64, for example.) While it seems unlikely anyone would care
to run with a stack depth limit exceeding 2GB, this is part of a
general push to avoid using type "long" to represent memory sizes.
It's convenient to use ssize_t rather than the perhaps-more-obvious
choice of size_t/Size, because the code involved depends on working
with a signed data type. Our MAX_KILOBYTES limit already ensures
that ssize_t will be sufficient to represent the maximum value of
max_stack_depth.
Extracted from a larger patch by Vladlen, plus additional hackery
by me.
Author: Vladlen Popolitov <v.popolitov@postgrespro.ru>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/1a01f0-66ec2d80-3b-68487680@27595217
|
|
Backpatch-through: 13
|
|
Cause parallel workers to not check datallowconn, rolcanlogin, and
ACL_CONNECT privileges. The leader already checked these things
(except for rolcanlogin which might have been checked for a different
role). Re-checking can accomplish little except to induce unexpected
failures in applications that might not even be aware that their query
has been parallelized. We already had the principle that parallel
workers rely on their leader to pass a valid set of authorization
information, so this change just extends that a bit further.
Also, modify the ReservedConnections, datconnlimit and rolconnlimit
logic so that these limits are only enforced against regular backends,
and only regular backends are counted while checking if the limits
were already reached. Previously, background processes that had an
assigned database or role were subject to these limits (with rather
random exclusions for autovac workers and walsenders), and the set of
existing processes that counted against each limit was quite haphazard
as well. The point of these limits, AFAICS, is to ensure the
availability of PGPROC slots for regular backends. Since all other
types of processes have their own separate pools of PGPROC slots, it
makes no sense either to enforce these limits against them or to count
them while enforcing the limit.
While edge-case failures of these sorts have been possible for a
long time, the problem got a good deal worse with commit 5a2fed911
(CVE-2024-10978), which caused parallel workers to make some of these
checks using the leader's current role where before we had used its
AuthenticatedUserId, thus allowing parallel queries to fail after
SET ROLE. The previous behavior was fairly accidental and I have
no desire to return to it.
This patch includes reverting 73c9f91a1, which was an emergency hack
to suppress these same checks in some cases. It wasn't complete,
as shown by a recent bug report from Laurenz Albe. We can also revert
fd4d93d26 and 492217301, which hacked around the same problems in one
regression test.
In passing, remove the special case for autovac workers in
CheckMyDatabase; it seems cleaner to have AutoVacWorkerMain pass
the INIT_PG_OVERRIDE_ALLOW_CONNS flag, now that that does what's
needed.
Like 5a2fed911, back-patch to supported branches (which sadly no
longer includes v12).
Discussion: https://postgr.es/m/1808397.1735156190@sss.pgh.pa.us
|
|
The need for this was missed in commit 93db6cbda, with the result
being that if we launch a slotsync worker it would consume one of
the PGPROCs in the max_connections pool. That could lead to inability
to launch the worker, or to subsequent failures of connection requests
that should have succeeded according to the configured settings.
Rather than create some one-off infrastructure to support this,
let's group the slotsync worker with the existing autovac launcher
in a new category of "special worker" processes. These are kind of
like auxiliary processes, but they cannot use that infrastructure
because they need to be able to run transactions.
For the moment, make these processes share the PGPROC freelist
used for autovac workers (which previously supplied the autovac
launcher too). This is partly to avoid an ABI change in v17,
and partly because it seems silly to have a freelist with
at most two members. This might be worth revisiting if we grow
enough workers in this category.
Tom Lane and Hou Zhijie. Back-patch to v17.
Discussion: https://postgr.es/m/1808397.1735156190@sss.pgh.pa.us
|
|
Previously we did this in PostmasterMain() and InitPostmasterChild(),
which meant that stack depth checking was disabled in non-postmaster
server processes, for instance in single-user mode. That seems like
a fairly bad idea, since there's no a-priori restriction on the
complexity of queries we will run in single-user mode. Moreover, this
led to not having quite the same stack depth limit in all processes,
which likely has no real-world effect but it offends my inner neatnik.
Setting the depth in main() guarantees that check_stack_depth() is
armed and has a consistent interpretation of stack depth in all forms
of server processes.
While at it, move the code associated with checking the stack depth
out of tcop/postgres.c (which was never a great home for it) into
a new file src/backend/utils/misc/stack_depth.c.
Discussion: https://postgr.es/m/2081982.1734393311@sss.pgh.pa.us
|
|
Introduce a separate BackendType for dead-end children, so that we
don't need a separate dead_end flag.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://www.postgresql.org/message-id/a102f15f-eac4-4ff2-af02-f9ff209ec66f@iki.fi
|
|
The SQL spec mandates that SET SESSION AUTHORIZATION implies
SET ROLE NONE. We tried to implement that within the lowest-level
functions that manipulate these settings, but that was a bad idea.
In particular, guc.c assumes that it doesn't matter in what order
it applies GUC variable updates, but that was not the case for these
two variables. This problem, compounded by some hackish attempts to
work around it, led to some security-grade issues:
* Rolling back a transaction that had done SET SESSION AUTHORIZATION
would revert to SET ROLE NONE, even if that had not been the previous
state, so that the effective user ID might now be different from what
it had been.
* The same for SET SESSION AUTHORIZATION in a function SET clause.
* If a parallel worker inspected current_setting('role'), it saw
"none" even when it should see something else.
Also, although the parallel worker startup code intended to cope
with the current role's pg_authid row having disappeared, its
implementation of that was incomplete so it would still fail.
Fix by fully separating the miscinit.c functions that assign
session_authorization from those that assign role. To implement the
spec's requirement, teach set_config_option itself to perform "SET
ROLE NONE" when it sets session_authorization. (This is undoubtedly
ugly, but the alternatives seem worse. In particular, there's no way
to do it within assign_session_authorization without incompatible
changes in the API for GUC assign hooks.) Also, improve
ParallelWorkerMain to directly set all the relevant user-ID variables
instead of relying on some of them to get set indirectly. That
allows us to survive not finding the pg_authid row during worker
startup.
In v16 and earlier, this includes back-patching 9987a7bf3 which
fixed a violation of GUC coding rules: SetSessionAuthorization
is not an appropriate place to be throwing errors from.
Security: CVE-2024-10978
|
|
Replace the fixed-size array of fast-path locks with arrays, sized on
startup based on max_locks_per_transaction. This allows using fast-path
locking for workloads that need more locks.
The fast-path locking introduced in 9.2 allowed each backend to acquire
a small number (16) of weak relation locks cheaply. If a backend needs
to hold more locks, it has to insert them into the shared lock table.
This is considerably more expensive, and may be subject to contention
(especially on many-core systems).
The limit of 16 fast-path locks was always rather low, because we have
to lock all relations - not just tables, but also indexes, views, etc.
For planning we need to lock all relations that might be used in the
plan, not just those that actually get used in the final plan. So even
with rather simple queries and schemas, we often need significantly more
than 16 locks.
As partitioning gets used more widely, and the number of partitions
increases, this limit is trivial to hit. Complex queries may easily use
hundreds or even thousands of locks. For workloads doing a lot of I/O
this is not noticeable, but for workloads accessing only data in RAM,
the access to the shared lock table may be a serious issue.
This commit removes the hard-coded limit of the number of fast-path
locks. Instead, the size of the fast-path arrays is calculated at
startup, and can be set much higher than the original 16-lock limit.
The overall fast-path locking protocol remains unchanged.
The variable-sized fast-path arrays can no longer be part of PGPROC, but
are allocated as a separate chunk of shared memory and then references
from the PGPROC entries.
The fast-path slots are organized as a 16-way set associative cache. You
can imagine it as a hash table of 16-slot "groups". Each relation is
mapped to exactly one group using hash(relid), and the group is then
processed using linear search, just like the original fast-path cache.
With only 16 entries this is cheap, with good locality.
Treating this as a simple hash table with open addressing would not be
efficient, especially once the hash table gets almost full. The usual
remedy is to grow the table, but we can't do that here easily. The
access would also be more random, with worse locality.
The fast-path arrays are sized using the max_locks_per_transaction GUC.
We try to have enough capacity for the number of locks specified in the
GUC, using the traditional 2^n formula, with an upper limit of 1024 lock
groups (i.e. 16k locks). The default value of max_locks_per_transaction
is 64, which means those instances will have 64 fast-path slots.
The main purpose of the max_locks_per_transaction GUC is to size the
shared lock table. It is often set to the "average" number of locks
needed by backends, with some backends using significantly more locks.
This should not be a major issue, however. Some backens may have to
insert locks into the shared lock table, but there can't be too many of
them, limiting the contention.
The only solution is to increase the GUC, even if the shared lock table
already has sufficient capacity. That is not free, especially in terms
of memory usage (the shared lock table entries are fairly large). It
should only happen on machines with plenty of memory, though.
In the future we may consider a separate GUC for the number of fast-path
slots, but let's try without one first.
Reviewed-by: Robert Haas, Jakub Wartak
Discussion: https://postgr.es/m/510b887e-c0ce-4a0c-a17a-2c6abb8d9a5c@enterprisedb.com
|
|
Previously, (auto)analyze used global variables VacuumPageHit,
VacuumPageMiss, and VacuumPageDirty to track buffer usage. However,
pgBufferUsage provides a more generic way to track buffer usage with
support functions.
This change replaces those global variables with pgBufferUsage in
analyze. Since analyze was the sole user of those variables, it
removes their declarations. Vacuum previously used those variables but
replaced them with pgBufferUsage as part of a bug fix, commit
5cd72cc0c.
Additionally, it adjusts the buffer usage message in both vacuum and
analyze for better consistency.
Author: Anthonin Bonnefoy
Reviewed-by: Masahiko Sawada, Michael Paquier
Discussion: https://postgr.es/m/CAO6_Xqr__kTTCLkftqS0qSCm-J7_xbRG3Ge2rWhucxQJMJhcRA%40mail.gmail.com
|
|
Move responsibility of generating the cancel key to the backend
process. The cancel key is now generated after forking, and the
backend advertises it in the ProcSignal array. When a cancel request
arrives, the backend handling it scans the ProcSignal array to find
the target pid and cancel key. This is similar to how this previously
worked in the EXEC_BACKEND case with the ShmemBackendArray, just
reusing the ProcSignal array.
One notable change is that we no longer generate cancellation keys for
non-backend processes. We generated them before just to prevent a
malicious user from canceling them; the keys for non-backend processes
were never actually given to anyone. There is now an explicit flag
indicating whether a process has a valid key or not.
I wrote this originally in preparation for supporting longer cancel
keys, but it's a nice cleanup on its own.
Reviewed-by: Jelte Fennema-Nio
Discussion: https://www.postgresql.org/message-id/508d0505-8b7a-4864-a681-e7e5edfe32aa@iki.fi
|
|
To avoid the compiler warnings:
launch_backend.c:211:39: warning: comparison of constant 16 with expression of type 'BackendType' (aka 'enum BackendType') is always true [-Wtautological-constant-out-of-range-compare]
launch_backend.c:233:39: warning: comparison of constant 16 with expression of type 'BackendType' (aka 'enum BackendType') is always true [-Wtautological-constant-out-of-range-compare]
The point of the assertions was to fail more explicitly if someone
adds a new BackendType to the end of the enum, but forgets to add it
to the child_process_kinds array. It was a pretty weak assertion to
begin with, because it wouldn't catch if you added a new BackendType
in the middle of the enum. So let's just remove it.
Per buildfarm member ayu and a few others, spotted by Tom Lane.
Discussion: https://www.postgresql.org/message-id/4119680.1710913067@sss.pgh.pa.us
|
|
Remove IsBackgroundWorker, IsAutoVacuumLauncherProcess(),
IsAutoVacuumWorkerProcess(), and IsLogicalSlotSyncWorker() in favor of
new Am*Process() macros that use MyBackendType. For consistency with
the existing Am*Process() macros.
Reviewed-by: Andres Freund
Discussion: https://www.postgresql.org/message-id/f3ecd4cb-85ee-4e54-8278-5fabfb3a4ed0@iki.fi
|
|
MyAuxProcType was redundant with MyBackendType.
Reviewed-by: Reid Thompson, Andres Freund
Discussion: https://www.postgresql.org/message-id/f3ecd4cb-85ee-4e54-8278-5fabfb3a4ed0@iki.fi
|
|
Now that BackendId was just another index into the proc array, it was
redundant with the 0-based proc numbers used in other places. Replace
all usage of backend IDs with proc numbers.
The only place where the term "backend id" remains is in a few pgstat
functions that expose backend IDs at the SQL level. Those IDs are now
in fact 0-based ProcNumbers too, but the documentation still calls
them "backend ids". That term still seems appropriate to describe what
the numbers are, so I let it be.
One user-visible effect is that pg_temp_0 is now a valid temp schema
name, for backend with ProcNumber 0.
Reviewed-by: Andres Freund
Discussion: https://www.postgresql.org/message-id/8171f1aa-496f-46a6-afc3-c46fe7a9b407@iki.fi
|
|
Previously, backend ID was an index into the ProcState array, in the
shared cache invalidation manager (sinvaladt.c). The entry in the
ProcState array was reserved at backend startup by scanning the array
for a free entry, and that was also when the backend got its backend
ID. Things become slightly simpler if we redefine backend ID to be the
index into the PGPROC array, and directly use it also as an index to
the ProcState array. This uses a little more memory, as we reserve a
few extra slots in the ProcState array for aux processes that don't
need them, but the simplicity is worth it.
Aux processes now also have a backend ID. This simplifies the
reservation of BackendStatusArray and ProcSignal slots.
You can now convert a backend ID into an index into the PGPROC array
simply by subtracting 1. We still use 0-based "pgprocnos" in various
places, for indexes into the PGPROC array, but the only difference now
is that backend IDs start at 1 while pgprocnos start at 0. (The next
commmit will get rid of the term "backend ID" altogether and make
everything 0-based.)
There is still a 'backendId' field in PGPROC, now part of 'vxid' which
encapsulates the backend ID and local transaction ID together. It's
needed for prepared xacts. For regular backends, the backendId is
always equal to pgprocno + 1, but for prepared xact PGPROC entries,
it's the ID of the original backend that processed the transaction.
Reviewed-by: Andres Freund, Reid Thompson
Discussion: https://www.postgresql.org/message-id/8171f1aa-496f-46a6-afc3-c46fe7a9b407@iki.fi
|
|
More precisely, what we do here is make the SLRU cache sizes
configurable with new GUCs, so that sites with high concurrency and big
ranges of transactions in flight (resp. multixacts/subtransactions) can
benefit from bigger caches. In order for this to work with good
performance, two additional changes are made:
1. the cache is divided in "banks" (to borrow terminology from CPU
caches), and algorithms such as eviction buffer search only affect
one specific bank. This forestalls the problem that linear searching
for a specific buffer across the whole cache takes too long: we only
have to search the specific bank, whose size is small. This work is
authored by Andrey Borodin.
2. Change the locking regime for the SLRU banks, so that each bank uses
a separate LWLock. This allows for increased scalability. This work
is authored by Dilip Kumar. (A part of this was previously committed as
d172b717c6f4.)
Special care is taken so that the algorithms that can potentially
traverse more than one bank release one bank's lock before acquiring the
next. This should happen rarely, but particularly clog.c's group commit
feature needed code adjustment to cope with this. I (Álvaro) also added
lots of comments to make sure the design is sound.
The new GUCs match the names introduced by bcdfa5f2e2f2 in the
pg_stat_slru view.
The default values for these parameters are similar to the previous
sizes of each SLRU. commit_ts, clog and subtrans accept value 0, which
means to adjust by dividing shared_buffers by 512 (so 2MB for every 1GB
of shared_buffers), with a cap of 8MB. (A new slru.c function
SimpleLruAutotuneBuffers() was added to support this.) The cap was
previously 1MB for clog, so for sites with more than 512MB of shared
memory the total memory used increases, which is likely a good tradeoff.
However, other SLRUs (notably multixact ones) retain smaller sizes and
don't support a configured value of 0. These values based on
shared_buffers may need to be revisited, but that's an easy change.
There was some resistance to adding these new GUCs: it would be better
to adjust to memory pressure automatically somehow, for example by
stealing memory from shared_buffers (where the caches can grow and
shrink naturally). However, doing that seems to be a much larger
project and one which has made virtually no progress in several years,
and because this is such a pain point for so many users, here we take
the pragmatic approach.
Author: Andrey Borodin <x4mmm@yandex-team.ru>
Author: Dilip Kumar <dilipbalaut@gmail.com>
Reviewed-by: Amul Sul, Gilles Darold, Anastasia Lubennikova,
Ivan Lazarev, Robert Haas, Thomas Munro, Tomas Vondra,
Yura Sokolov, Васильев Дмитрий (Dmitry Vasiliev).
Discussion: https://postgr.es/m/2BEC2B3F-9B61-4C1D-9FB5-5FAB0F05EF86@yandex-team.ru
Discussion: https://postgr.es/m/CAFiTN-vzDvNz=ExGXz6gdyjtzGixKSqs0mKHMmaQ8sOSEFZ33A@mail.gmail.com
|
|
By enabling slot synchronization, all the failover logical replication
slots on the primary (assuming configurations are appropriate) are
automatically created on the physical standbys and are synced
periodically. The slot sync worker on the standby server pings the primary
server at regular intervals to get the necessary failover logical slots
information and create/update the slots locally. The slots that no longer
require synchronization are automatically dropped by the worker.
The nap time of the worker is tuned according to the activity on the
primary. The slot sync worker waits for some time before the next
synchronization, with the duration varying based on whether any slots were
updated during the last cycle.
A new parameter sync_replication_slots enables or disables this new
process.
On promotion, the slot sync worker is shut down by the startup process to
drop any temporary slots acquired by the slot sync worker and to prevent
the worker from trying to fetch the failover slots.
A functionality to allow logical walsenders to wait for the physical will
be done in a subsequent commit.
Author: Shveta Malik, Hou Zhijie based on design inputs by Masahiko Sawada and Amit Kapila
Reviewed-by: Masahiko Sawada, Bertrand Drouvot, Peter Smith, Dilip Kumar, Ajin Cherian, Nisha Moond, Kuroda Hayato, Amit Kapila
Discussion: https://postgr.es/m/514f6f2f-6833-4539-39f1-96cd1e011f23@enterprisedb.com
|
|
This commit adds timeout that is expected to be used as a prevention
of long-running queries. Any session within the transaction will be
terminated after spanning longer than this timeout.
However, this timeout is not applied to prepared transactions.
Only transactions with user connections are affected.
Discussion: https://postgr.es/m/CAAhFRxiQsRs2Eq5kCo9nXE3HTugsAAJdSQSmxncivebAxdmBjQ%40mail.gmail.com
Author: Andrey Borodin <amborodin@acm.org>
Author: Japin Li <japinli@hotmail.com>
Author: Junwang Zhao <zhjwpku@gmail.com>
Reviewed-by: Nikolay Samokhvalov <samokhvalov@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: bt23nguyent <bt23nguyent@oss.nttdata.com>
Reviewed-by: Yuhang Qiu <iamqyh@gmail.com>
|
|
Reported-by: Michael Paquier
Discussion: https://postgr.es/m/ZZKTDPxBBMt3C0J9@paquier.xyz
Backpatch-through: 12
|
|
When active, this process writes WAL summary files to
$PGDATA/pg_wal/summaries. Each summary file contains information for a
certain range of LSNs on a certain TLI. For each relation, it stores a
"limit block" which is 0 if a relation is created or destroyed within
a certain range of WAL records, or otherwise the shortest length to
which the relation was truncated during that range of WAL records, or
otherwise InvalidBlockNumber. In addition, it stores a list of blocks
which have been modified during that range of WAL records, but
excluding blocks which were removed by truncation after they were
modified and never subsequently modified again.
In other words, it tells us which blocks need to copied in case of an
incremental backup covering that range of WAL records. But this
doesn't yet add the capability to actually perform an incremental
backup; the next patch will do that.
A new parameter summarize_wal enables or disables this new background
process. The background process also automatically deletes summary
files that are older than wal_summarize_keep_time, if that parameter
has a non-zero value and the summarizer is configured to run.
Patch by me, with some design help from Dilip Kumar and Andres Freund.
Reviewed by Matthias van de Meent, Dilip Kumar, Jakub Wartak, Peter
Eisentraut, and Álvaro Herrera.
Discussion: http://postgr.es/m/CA+TgmoYOYZfMCyOXFyC-P+-mdrZqm5pP2N7S-r0z3_402h9rsA@mail.gmail.com
|
|
This GUC was intended as a debugging help in the 9.0 area when hot
standby and streaming replication were being developped, able to offer
more information at LOG level rather than DEBUGn. There are more tools
available these days that are able to offer rather equivalent
information, like pg_waldump introduced in 9.3. It is not obvious how
this facility is useful these days, so let's remove it.
Author: Bharath Rupireddy
Discussion: https://postgr.es/m/ZXEXEAUVFrvpquSd@paquier.xyz
|
|
Since C99, there can be a trailing comma after the last value in an
enum definition. A lot of new code has been introducing this style on
the fly. Some new patches are now taking an inconsistent approach to
this. Some add the last comma on the fly if they add a new last
value, some are trying to preserve the existing style in each place,
some are even dropping the last comma if there was one. We could
nudge this all in a consistent direction if we just add the trailing
commas everywhere once.
I omitted a few places where there was a fixed "last" value that will
always stay last. I also skipped the header files of libpq and ecpg,
in case people want to use those with older compilers. There were
also a small number of cases where the enum type wasn't used anywhere
(but the enum values were), which ended up confusing pgindent a bit,
so I left those alone.
Discussion: https://www.postgresql.org/message-id/flat/386f8c45-c8ac-4681-8add-e3b0852c1620%40eisentraut.org
|
|
This commit introduces trigger on login event, allowing to fire some actions
right on the user connection. This can be useful for logging or connection
check purposes as well as for some personalization of environment. Usage
details are described in the documentation included, but shortly usage is
the same as for other triggers: create function returning event_trigger and
then create event trigger on login event.
In order to prevent the connection time overhead when there are no triggers
the commit introduces pg_database.dathasloginevt flag, which indicates database
has active login triggers. This flag is set by CREATE/ALTER EVENT TRIGGER
command, and unset at connection time when no active triggers found.
Author: Konstantin Knizhnik, Mikhail Gribkov
Discussion: https://postgr.es/m/0d46d29f-4558-3af9-9c85-7774e14a7709%40postgrespro.ru
Reviewed-by: Pavel Stehule, Takayuki Tsunakawa, Greg Nancarrow, Ivan Panchenko
Reviewed-by: Daniel Gustafsson, Teodor Sigaev, Robert Haas, Andres Freund
Reviewed-by: Tom Lane, Andrey Sokolov, Zhihong Yu, Sergey Shinderuk
Reviewed-by: Gregory Stark, Nikita Malakhov, Ted Yu
|
|
This adds a new option called BGWORKER_BYPASS_ROLELOGINCHECK to the
flags available to BackgroundWorkerInitializeConnection() and
BackgroundWorkerInitializeConnectionByOid().
This gives the possibility to bgworkers to bypass the role login check,
making possible the use of a role that has no login rights while not
being a superuser. PostgresInit() gains a new flag called
INIT_PG_OVERRIDE_ROLE_LOGIN, taking advantage of the refactoring done in
4800a5dfb4c4.
Regression tests are added to worker_spi to check the behavior of this
new option with bgworkers.
Author: Bertrand Drouvot
Reviewed-by: Nathan Bossart, Michael Paquier, Bharath Rupireddy
Discussion: https://postgr.es/m/bcc36259-7850-4882-97ef-d6b905d2fc51@gmail.com
|
|
InitPostgres() has been using a set of boolean arguments to control its
behavior, and a patch under discussion was aiming at expanding it with a
third one. In preparation for expanding this area, this commit switches
all the current boolean arguments of this routine to a single bits32
argument instead. Two values are currently supported for the flags:
- INIT_PG_LOAD_SESSION_LIBS to load [session|local]_preload_libraries at
startup.
- INIT_PG_OVERRIDE_ALLOW_CONNS to allow connection to a database even if
it has !datallowconn. This is used by bgworkers.
Reviewed-by: Bertrand Drouvot
Discussion: https://postgr.es/m/ZSTn66_BXRZCeaqS@paquier.xyz
|
|
Presently, the privilege check for SET SESSION AUTHORIZATION checks
whether the original authenticated role was a superuser at
connection start time. Even if the role loses the superuser
attribute, its existing sessions are permitted to change session
authorization to any role.
This commit modifies this privilege check to verify the original
authenticated role currently has superuser. In the event that the
authenticated role loses superuser within a session authorization
change, the authorization change will remain in effect, which means
the user can still take advantage of the target role's privileges.
However, [RE]SET SESSION AUTHORIZATION will only permit switching
to the original authenticated role.
Author: Joseph Koshakow
Discussion: https://postgr.es/m/CAAvxfHc-HHzONQ2oXdvhFF9ayRnidPwK%2BfVBhRzaBWYYLVQL-g%40mail.gmail.com
|
|
Presently, the privilege check for SET SESSION AUTHORIZATION is
performed in session_authorization's assign_hook. A relevant
comment states, "It's OK because the check does not require catalog
access and can't fail during an end-of-transaction GUC
reversion..." However, we plan to add a catalog lookup to this
privilege check in a follow-up commit.
This commit moves this privilege check to the check_hook for
session_authorization. Like check_role(), we do not throw a hard
error for insufficient privileges when the source is PGC_S_TEST.
Author: Joseph Koshakow
Discussion: https://postgr.es/m/CAAvxfHc-HHzONQ2oXdvhFF9ayRnidPwK%2BfVBhRzaBWYYLVQL-g%40mail.gmail.com
|
|
Add new options to the VACUUM and ANALYZE commands called
BUFFER_USAGE_LIMIT to allow users more control over how large to make the
buffer access strategy that is used to limit the usage of buffers in
shared buffers. Larger rings can allow VACUUM to run more quickly but
have the drawback of VACUUM possibly evicting more buffers from shared
buffers that might be useful for other queries running on the database.
Here we also add a new GUC named vacuum_buffer_usage_limit which controls
how large to make the access strategy when it's not specified in the
VACUUM/ANALYZE command. This defaults to 256KB, which is the same size as
the access strategy was prior to this change. This setting also
controls how large to make the buffer access strategy for autovacuum.
Per idea by Andres Freund.
Author: Melanie Plageman
Reviewed-by: David Rowley
Reviewed-by: Andres Freund
Reviewed-by: Justin Pryzby
Reviewed-by: Bharath Rupireddy
Discussion: https://postgr.es/m/20230111182720.ejifsclfwymw2reb@awork3.anarazel.de
|
|
Commit 0a20ff54f split out the GUC variables from guc.c into a new file
guc_tables.c. This updates comments referencing guc.c regarding variables
which are now in guc_tables.c.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/6B50C70C-8C1F-4F9A-A7C0-EEAFCC032406@yesql.se
|
|
This commit adds the infrastructure for more detailed IO statistics. The calls
to actually count IOs, a system view to access the new statistics,
documentation and tests will be added in subsequent commits, to make review
easier.
While we already had some IO statistics, e.g. in pg_stat_bgwriter and
pg_stat_database, they did not provide sufficient detail to understand what
the main sources of IO are, or whether configuration changes could avoid
IO. E.g., pg_stat_bgwriter.buffers_backend does contain the number of buffers
written out by a backend, but as that includes extending relations (always
done by backends) and writes triggered by the use of buffer access strategies,
it cannot easily be used to tune background writer or checkpointer. Similarly,
pg_stat_database.blks_read cannot easily be used to tune shared_buffers /
compute a cache hit ratio, as the use of buffer access strategies will often
prevent a large fraction of the read blocks to end up in shared_buffers.
The new IO statistics count IO operations (evict, extend, fsync, read, reuse,
and write), and are aggregated for each combination of backend type (backend,
autovacuum worker, bgwriter, etc), target object of the IO (relations, temp
relations) and context of the IO (normal, vacuum, bulkread, bulkwrite).
What is tracked in this series of patches, is sufficient to perform the
aforementioned analyses. Further details, e.g. tracking the number of buffer
hits, would make that even easier, but was left out for now, to keep the scope
of the already large patchset manageable.
Bumps PGSTAT_FILE_FORMAT_ID.
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20200124195226.lth52iydq2n2uilq@alap3.anarazel.de
|
|
Switch to a design similar to regular backends, instead of the previous
arrangement where signal handlers did non-trivial state management and
called fork(). The main changes are:
* The postmaster now has its own local latch to wait on. (For now, we
don't want other backends setting its latch directly, but that could
probably be made to work with more research on robustness.)
* The existing signal handlers are cut in two: a handle_pm_XXX() part
that just sets pending_pm_XXX flags and the latch, and a
process_pm_XXX() part that runs later when the latch is seen.
* Signal handlers are now installed with the regular pqsignal()
function rather than the special pqsignal_pm() function; historical
portability concerns about the effect of SA_RESTART on select() are no
longer relevant, and we don't need to block signals anymore.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA%2BhUKG%2BZ-HpOj1JsO9eWUP%2Bar7npSVinsC_npxSy%2BjdOMsx%3DGg%40mail.gmail.com
|
|
Backpatch-through: 11
|
|
These don't offer anything over plain Assert, and their usage had
already been declared obsolescent.
Author: Nathan Bossart <nathandbossart@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://www.postgresql.org/message-id/20221009210148.GA900071@nathanxps13
|
|
SYSTEM_USER is a reserved keyword of the SQL specification that,
roughly described, is aimed at reporting some information about the
system user who has connected to the database server. It may include
implementation-specific information about the means by the user
connected, like an authentication method.
This commit implements SYSTEM_USER as of auth_method:identity, where
"auth_method" is a keyword about the authentication method used to log
into the server (like peer, md5, scram-sha-256, gss, etc.) and
"identity" is the authentication identity as introduced by 9afffcb (peer
sets authn to the OS user name, gss to the user principal, etc.). This
format has been suggested by Tom Lane.
Note that thanks to d951052, SYSTEM_USER is available to parallel
workers.
Bump catalog version.
Author: Bertrand Drouvot
Reviewed-by: Jacob Champion, Joe Conway, Álvaro Herrera, Michael Paquier
Discussion: https://postgr.es/m/7e692b8c-0b11-45db-1cad-3afc5b57409f@amazon.com
|
|
Make sure that function declarations use names that exactly match the
corresponding names from function definitions in storage, catalog,
access method, executor, and logical replication code, as well as in
miscellaneous utility/library code.
Like other recent commits that cleaned up function parameter names, this
commit was written with help from clang-tidy. Later commits will do the
same for other parts of the codebase.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/CAH2-WznJt9CMM9KJTMjJh_zbL5hD9oX44qdJ4aqZtjFi-zA3Tg@mail.gmail.com
|
|
This commit moves authn_id into a new global structure called
ClientConnectionInfo (mapping to a MyClientConnectionInfo for each
backend) which is intended to hold all the client information that
should be shared between the backend and any of its parallel workers,
access for extensions and triggers being the primary use case. There is
no need to push all the data of Port to the workers, and authn_id is
quite a generic concept so using a separate structure provides the best
balance (the name of the structure has been suggested by Robert Haas).
While on it, and per discussion as this would be useful for a potential
SYSTEM_USER that can be accessed through parallel workers, a second
field is added for the authentication method, copied directly from
Port.
ClientConnectionInfo is serialized and restored using a new parallel
key and a structure tracks the length of the authn_id, making the
addition of more fields straight-forward.
Author: Jacob Champion
Reviewed-by: Bertrand Drouvot, Stephen Frost, Robert Haas, Tom Lane,
Michael Paquier, Julien Rouhaud
Discussion: https://postgr.es/m/793d990837ae5c06a558d58d62de9378ab525d83.camel@vmware.com
|
|
All backends should have a BackendType to enable statistics reporting
per BackendType.
Add a new BackendType for standalone backends, B_STANDALONE_BACKEND (and
alphabetize the BackendTypes). Both the bootstrap backend and single
user mode backends will have BackendType B_STANDALONE_BACKEND.
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://www.postgresql.org/message-id/CAAKRu_aaq33UnG4TXq3S-OSXGWj1QGf0sU%2BECH4tNwGFNERkZA%40mail.gmail.com
|
|
Previously we did this after InitPostgres, at a somewhat randomly chosen
place within PostgresMain. However, since commit a0ffa885e doing this
outside a transaction can cause a crash, if we need to check permissions
while replacing a placeholder GUC. (Besides which, a preloaded library
could itself want to do database access within _PG_init.)
To avoid needing an additional transaction start/end in every session,
move the process_session_preload_libraries call to within InitPostgres's
transaction. That requires teaching the code not to call it when
InitPostgres is called from somewhere other than PostgresMain, since
we don't want session_preload_libraries to affect background workers.
The most future-proof solution here seems to be to add an additional
flag parameter to InitPostgres; fortunately, we're not yet very worried
about API stability for v15.
Doing this also exposed the fact that we're currently honoring
session_preload_libraries in walsenders, even those not connected to
any database. This seems, at minimum, a POLA violation: walsenders
are not interactive sessions. Let's stop doing that.
(All these comments also apply to local_preload_libraries, of course.)
Per report from Gurjeet Singh (thanks also to Nathan Bossart and Kyotaro
Horiguchi for review). Backpatch to v15 where a0ffa885e came in.
Discussion: https://postgr.es/m/CABwTF4VEpwTHhRQ+q5MiC5ucngN-whN-PdcKeufX7eLSoAfbZA@mail.gmail.com
|
|
This CPU architecture has been discontinued. We already removed HP-UX
support, we never supported Windows/Itanium, and the open source
operating systems that a vintage hardware owner might hope to run have
all either ended Itanium support or never fully released support (NetBSD
may eventually). The extra code we carry for this rare ISA is now
untested. It seems like a good time to remove it.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/1415825.1656893299%40sss.pgh.pa.us
|
|
Currently, preloaded libraries are expected to request additional
shared memory and LWLocks in _PG_init(). However, it is not unusal
for such requests to depend on MaxBackends, which won't be
initialized at that time. Such requests could also depend on GUCs
that other modules might change. This introduces a new hook where
modules can safely use MaxBackends and GUCs to request additional
shared memory and LWLocks.
Furthermore, this change restricts requests for shared memory and
LWLocks to this hook. Previously, libraries could make requests
until the size of the main shared memory segment was calculated.
Unlike before, we no longer silently ignore requests received at
invalid times. Instead, we FATAL if someone tries to request
additional shared memory or LWLocks outside of the hook.
Nathan Bossart and Julien Rouhaud
Discussion: https://postgr.es/m/20220412210112.GA2065815%40nathanxps13
Discussion: https://postgr.es/m/Yn2jE/lmDhKtkUdr@paquier.xyz
|
|
This reverts commits 0147fc7, 4567596, aa64f23, and 5ecd018.
There is no longer agreement that introducing this function
was the right way to address the problem. The consensus now
seems to favor trying to make a correct value for MaxBackends
available to mdules executing their _PG_init() functions.
Nathan Bossart
Discussion: http://postgr.es/m/20220323045229.i23skfscdbvrsuxa@jrouhaud
|
|
Up until now, we've had a policy of only marking certain variables
in the PostgreSQL header files with PGDLLIMPORT, but now we've
decided to mark them all. This means that extensions running on
Windows should no longer operate at a disadvantage as compared to
extensions running on Linux: if the variable is present in a header
file, it should be accessible.
Discussion: http://postgr.es/m/CA+TgmoYanc1_FSfimhgiWSqVyP5KKmh5NP2BWNwDhO8Pg2vGYQ@mail.gmail.com
|
