| Age | Commit message (Collapse) | Author |
|---|
|
Backpatch-through: 13
|
|
Reported-by: Michael Paquier
Discussion: https://postgr.es/m/ZZKTDPxBBMt3C0J9@paquier.xyz
Backpatch-through: 12
|
|
Since C99, there can be a trailing comma after the last value in an
enum definition. A lot of new code has been introducing this style on
the fly. Some new patches are now taking an inconsistent approach to
this. Some add the last comma on the fly if they add a new last
value, some are trying to preserve the existing style in each place,
some are even dropping the last comma if there was one. We could
nudge this all in a consistent direction if we just add the trailing
commas everywhere once.
I omitted a few places where there was a fixed "last" value that will
always stay last. I also skipped the header files of libpq and ecpg,
in case people want to use those with older compilers. There were
also a small number of cases where the enum type wasn't used anywhere
(but the enum values were), which ended up confusing pgindent a bit,
so I left those alone.
Discussion: https://www.postgresql.org/message-id/flat/386f8c45-c8ac-4681-8add-e3b0852c1620%40eisentraut.org
|
|
This adds the ability to pretty-print XML documents ... according to
libxml's somewhat idiosyncratic notions of what's pretty, anyway.
One notable divergence from a strict reading of the spec is that
libxml is willing to collapse empty nodes "<node></node>" to just
"<node/>", whereas SQL and the underlying XML spec say that this
option should only result in whitespace tweaks. Nonetheless,
it seems close enough to justify using the SQL-standard syntax.
Jim Jones, reviewed by Peter Smith and myself
Discussion: https://postgr.es/m/2f5df461-dad8-6d7d-4568-08e10608a69b@uni-muenster.de
|
|
Backpatch-through: 11
|
|
The previous macro implementations just cast the argument to a target
type but did not check whether the input type was appropriate. The
function implementation can do better type checking of the input type.
For the *GetDatumFast() macros, converting to an inline function
doesn't work in the !USE_FLOAT8_BYVAL case, but we can use
AssertVariableIsOfTypeMacro() to get a similar level of type checking.
Reviewed-by: Aleksander Alekseev <aleksander@timescale.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/8528fb7e-0aa2-6b54-85fb-0c0886dbd6ed%40enterprisedb.com
|
|
Make sure that function declarations use names that exactly match the
corresponding names from function definitions in optimizer, parser,
utility, libpq, and "commands" code, as well as in remaining library
code. Do the same for all code related to frontend programs (with the
exception of pg_dump/pg_dumpall related code).
Like other recent commits that cleaned up function parameter names, this
commit was written with help from clang-tidy. Later commits will handle
ecpg and pg_dump/pg_dumpall.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/CAH2-WznJt9CMM9KJTMjJh_zbL5hD9oX44qdJ4aqZtjFi-zA3Tg@mail.gmail.com
|
|
This reverts commit 595836e99bf1ee6d43405b885fb69bb8c6d3ee23.
It has problems when USE_FLOAT8_BYVAL is off.
|
|
The previous macro implementations just cast the argument to a target
type but did not check whether the input type was appropriate. The
function implementation can do better type checking of the input type.
Reviewed-by: Aleksander Alekseev <aleksander@timescale.com>
Discussion: https://www.postgresql.org/message-id/flat/8528fb7e-0aa2-6b54-85fb-0c0886dbd6ed%40enterprisedb.com
|
|
Up until now, we've had a policy of only marking certain variables
in the PostgreSQL header files with PGDLLIMPORT, but now we've
decided to mark them all. This means that extensions running on
Windows should no longer operate at a disadvantage as compared to
extensions running on Linux: if the variable is present in a header
file, it should be accessible.
Discussion: http://postgr.es/m/CA+TgmoYanc1_FSfimhgiWSqVyP5KKmh5NP2BWNwDhO8Pg2vGYQ@mail.gmail.com
|
|
Backpatch-through: 10
|
|
Backpatch-through: 9.5
|
|
Backpatch-through: update all files in master, backpatch legal files through 9.4
|
|
Similar to commits 14aec03502, 7e735035f2 and dddf4cdc33, this commit
makes the order of header file inclusion consistent in more places.
Author: Vignesh C
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/CALDaNm2Sznv8RR6Ex-iJO6xAdsxgWhCoETkaYX=+9DW3q0QCfA@mail.gmail.com
|
|
Switch to 2.1 version of pg_bsd_indent. This formats
multiline function declarations "correctly", that is with
additional lines of parameter declarations indented to match
where the first line's left parenthesis is.
Discussion: https://postgr.es/m/CAEepm=0P3FeTXRcU5B2W3jv3PgRVZ-kGUXLGfd42FFhUROO3ug@mail.gmail.com
|
|
Backpatch-through: certain files through 9.4
|
|
Backpatch-through: certain files through 9.3
|
|
Reviewed-by: Fabien COELHO <coelho@cri.ensmp.fr>
|
|
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4dd0dad0dd9eea4be9cc1412373a8c89 wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
|
|
The new indent version includes numerous fixes thanks to Piotr Stefaniak.
The main changes visible in this commit are:
* Nicer formatting of function-pointer declarations.
* No longer unexpectedly removes spaces in expressions using casts,
sizeof, or offsetof.
* No longer wants to add a space in "struct structname *varname", as
well as some similar cases for const- or volatile-qualified pointers.
* Declarations using PG_USED_FOR_ASSERTS_ONLY are formatted more nicely.
* Fixes bug where comments following declarations were sometimes placed
with no space separating them from the code.
* Fixes some odd decisions for comments following case labels.
* Fixes some cases where comments following code were indented to less
than the expected column 33.
On the less good side, it now tends to put more whitespace around typedef
names that are not listed in typedefs.list. This might encourage us to
put more effort into typedef name collection; it's not really a bug in
indent itself.
There are more changes coming after this round, having to do with comment
indentation and alignment of lines appearing within parentheses. I wanted
to limit the size of the diffs to something that could be reviewed without
one's eyes completely glazing over, so it seemed better to split up the
changes as much as practical.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
|
|
This replaces the old, recursive tree-walk based evaluation, with
non-recursive, opcode dispatch based, expression evaluation.
Projection is now implemented as part of expression evaluation.
This both leads to significant performance improvements, and makes
future just-in-time compilation of expressions easier.
The speed gains primarily come from:
- non-recursive implementation reduces stack usage / overhead
- simple sub-expressions are implemented with a single jump, without
function calls
- sharing some state between different sub-expressions
- reduced amount of indirect/hard to predict memory accesses by laying
out operation metadata sequentially; including the avoidance of
nearly all of the previously used linked lists
- more code has been moved to expression initialization, avoiding
constant re-checks at evaluation time
Future just-in-time compilation (JIT) has become easier, as
demonstrated by released patches intended to be merged in a later
release, for primarily two reasons: Firstly, due to a stricter split
between expression initialization and evaluation, less code has to be
handled by the JIT. Secondly, due to the non-recursive nature of the
generated "instructions", less performance-critical code-paths can
easily be shared between interpreted and compiled evaluation.
The new framework allows for significant future optimizations. E.g.:
- basic infrastructure for to later reduce the per executor-startup
overhead of expression evaluation, by caching state in prepared
statements. That'd be helpful in OLTPish scenarios where
initialization overhead is measurable.
- optimizing the generated "code". A number of proposals for potential
work has already been made.
- optimizing the interpreter. Similarly a number of proposals have
been made here too.
The move of logic into the expression initialization step leads to some
backward-incompatible changes:
- Function permission checks are now done during expression
initialization, whereas previously they were done during
execution. In edge cases this can lead to errors being raised that
previously wouldn't have been, e.g. a NULL array being coerced to a
different array type previously didn't perform checks.
- The set of domain constraints to be checked, is now evaluated once
during expression initialization, previously it was re-built
every time a domain check was evaluated. For normal queries this
doesn't change much, but e.g. for plpgsql functions, which caches
ExprStates, the old set could stick around longer. The behavior
around might still change.
Author: Andres Freund, with significant changes by Tom Lane,
changes by Heikki Linnakangas
Reviewed-By: Tom Lane, Heikki Linnakangas
Discussion: https://postgr.es/m/20161206034955.bh33paeralxbtluv@alap3.anarazel.de
|
|
XMLTABLE is defined by the SQL/XML standard as a feature that allows
turning XML-formatted data into relational form, so that it can be used
as a <table primary> in the FROM clause of a query.
This new construct provides significant simplicity and performance
benefit for XML data processing; what in a client-side custom
implementation was reported to take 20 minutes can be executed in 400ms
using XMLTABLE. (The same functionality was said to take 10 seconds
using nested PostgreSQL XPath function calls, and 5 seconds using
XMLReader under PL/Python).
The implemented syntax deviates slightly from what the standard
requires. First, the standard indicates that the PASSING clause is
optional and that multiple XML input documents may be given to it; we
make it mandatory and accept a single document only. Second, we don't
currently support a default namespace to be specified.
This implementation relies on a new executor node based on a hardcoded
method table. (Because the grammar is fixed, there is no extensibility
in the current approach; further constructs can be implemented on top of
this such as JSON_TABLE, but they require changes to core code.)
Author: Pavel Stehule, Álvaro Herrera
Extensively reviewed by: Craig Ringer
Discussion: https://postgr.es/m/CAFj8pRAgfzMD-LoSmnMGybD0WsEznLHWap8DO79+-GTRAPR4qA@mail.gmail.com
|
|
Gen_fmgrtab.pl creates a new file fmgrprotos.h, which contains
prototypes for all functions registered in pg_proc.h. This avoids
having to manually maintain these prototypes across a random variety of
header files. It also automatically enforces a correct function
signature, and since there are warnings about missing prototypes, it
will detect functions that are defined but not registered in
pg_proc.h (or otherwise used).
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
|
|
|
|
Backpatch certain files through 9.1
|
|
Backpatch certain files through 9.0
|
|
Update all files in head, and files COPYRIGHT and legal.sgml in all back
branches.
|
|
Fully update git head, and update back branches in ./COPYRIGHT and
legal.sgml files.
|
|
commit-fest.
|
|
|
|
libxml reports some errors (like invalid xmlns attributes) via the error
handler hook, but still returns a success indicator to the library caller.
This causes us to miss some errors that are important to report. Since the
"generic" error handler hook doesn't know whether the message it's getting
is for an error, warning, or notice, stop using that and instead start
using the "structured" error handler hook, which gets enough information
to be useful.
While at it, arrange to save and restore the error handler hook setting in
each libxml-using function, rather than assuming we can set and forget the
hook. This should improve the odds of working nicely with third-party
libraries that also use libxml.
In passing, volatile-ize some local variables that get modified within
PG_TRY blocks. I noticed this while testing with an older gcc version
than I'd previously tried to compile xml.c with.
Florian Pflug and Tom Lane, with extensive review/testing by Noah Misch
|
|
|
|
|
|
|
|
functions to the core XML code. Per discussion, the former depends on
XMLOPTION while the others do not. These supersede a version previously
offered by contrib/xml2.
Mike Fowler, reviewed by Pavel Stehule
|
|
it offers support for namespace mapping.
Mike Fowler, reviewed by David Fetter
|
|
by Mike Fowler, reviewed by Peter Eisentraut
|
|
too, instead of duplicating the functionality (badly).
I renamed xml_init to pg_xml_init, because the former seemed just a bit too
generic to be safe as a global symbol. I considered likewise renaming
xml_ereport to pg_xml_ereport, but felt that the reference to ereport probably
made it sufficiently PG-centric already.
|
|
|
|
There are probably still some adjustments to be made in the details
of the output, but this gets the basic structure in place.
Robert Haas
|
|
provided by Andrew.
|
|
Author: Itagaki Takahiro <itagaki.takahiro@oss.ntt.co.jp>
|
|
redirecting libxml's allocations into a Postgres context. Instead, just let
it use malloc directly, and add PG_TRY blocks as needed to be sure we release
libxml data structures in error recovery code paths. This is ugly but seems
much more likely to play nicely with third-party uses of libxml, as seen in
recent trouble reports about using Perl XML facilities in pl/perl and bug
#4774 about contrib/xml2.
I left the code for allocation redirection in place, but it's only
built/used if you #define USE_LIBXMLCONTEXT. This is because I found it
useful to corral libxml's allocations in a palloc context when hunting
for libxml memory leaks, and we're surely going to have more of those
in the future with this type of approach. But we don't want it turned on
in a normal build because it breaks exactly what we need to fix.
I have not re-indented most of the code sections that are now wrapped
by PG_TRY(); that's for ease of review. pg_indent will fix it.
This is a pre-existing bug in 8.3, but I don't dare back-patch this change
until it's gotten a reasonable amount of field testing.
|
|
|
|
xmloption GUC variables into enums..
|
|
in whichever context happens to be current during a call of an xml.c function,
use a dedicated context that will not go away until we explicitly delete it
(which we do at transaction end or subtransaction abort). This makes recovery
after an error much simpler --- we don't have to individually delete the data
structures created by libxml. Also, we need to initialize and cleanup libxml
only once per transaction (if there's no error) instead of once per function
call, so it should be a bit faster. We'll need to keep an eye out for
intra-transaction memory leaks, though. Alvaro and Tom.
|
|
|
|
avoid this problem in the future.)
|
|
|
|
- Function renamed to "xpath".
- Function is now strict, per discussion.
- Return empty array in case when XPath expression detects nothing
(previously, NULL was returned in such case), per discussion.
- (bugfix) Work with fragments with prologue: select xpath('/a',
'<?xml version="1.0"?><a /><b />'); // now XML datum is always wrapped
with dummy <x>...</x>, XML prologue simply goes away (if any).
- Some cleanup.
Nikolay Samokhvalov
Some code cleanup and documentation work by myself.
|
