| Age | Commit message (Collapse) | Author |
|---|
|
Move plpython_error_5.out to plpython_error.out, since the pre-3.5
version is no longer needed, since we raised the Python requirement to
3.6 (commit 45363fca637).
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Jacob Champion <jacob.champion@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/d620e7c6-becc-4a8e-9b43-eea0da55faf2@eisentraut.org
|
|
Clean up after rearranging PG_TRY blocks.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/2954090.1748723636@sss.pgh.pa.us
Backpatch-through: 13
|
|
PLy_elog_impl and its subroutine PLy_traceback intended to avoid
leaking any PyObject reference counts, but their coverage of the
matter was sadly incomplete. In particular, out-of-memory errors
in most of the string-construction subroutines could lead to
reference count leaks, because those calls were outside the
PG_TRY blocks responsible for dropping reference counts.
Fix by (a) adjusting the scopes of the PG_TRY blocks, and
(b) moving the responsibility for releasing the reference counts
of the traceback-stack objects to PLy_elog_impl. This requires
some additional "volatile" markers, but not too many.
In passing, fix an ancient thinko: use of the "e_module_o" PyObject
was guarded by "if (e_type_s)", where surely "if (e_module_o)"
was meant. This would only have visible consequences if the
"__name__" attribute were present but the "__module__" attribute
wasn't, which apparently never happens; but someday it might.
Rearranging the PG_TRY blocks requires indenting a fair amount
of code one more tab stop, which I'll do separately for clarity.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/2954090.1748723636@sss.pgh.pa.us
Backpatch-through: 13
|
|
Source-Git-URL: https://git.postgresql.org/git/pgtranslation/messages.git
Source-Git-Hash: f90ee4803c30491e5c49996b973b8a30de47bfb2
|
|
plpython.h included plpy_util.h, simply on the grounds that "it's
easier to just include it everywhere". However, plpy_util.h must
include plpython.h, or it won't pass headerscheck. While the
resulting circularity doesn't have any immediate bad effect,
it's poor design. We have seen serious messes arise in the past
from overly-broad inclusion footprints created by such circularities,
so let's establish a project policy against it.
To fix, just replace *.c files' inclusions of plpython.h with
plpy_util.h. They'll pull in plpython.h indirectly; indeed, almost
all have already done so via inclusions of other plpy_xxx.h headers.
(Any extensions using plpython.h can do likewise without breaking
the compatibility of their code with prior Postgres versions.)
Reported-by: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Discussion: https://postgr.es/m/aAxQ6fcY5QQV1lo3@ip-10-97-1-34.eu-west-3.compute.internal
|
|
This is claimed in the documentation but there was a no test case for
it.
Reported-by: Bogdan Grigorenko <gri.bogdan.2020@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/173543330569.680.6706329879058172623%40wrigleys.postgresql.org
|
|
It seems potentially useful to label our shared libraries with version
information, now that a facility exists for retrieving that. This
patch labels them with the PG_VERSION string. There was some
discussion about using semantic versioning conventions, but that
doesn't seem terribly helpful for modules with no SQL-level presence;
and for those that do have SQL objects, we typically expect them
to support multiple revisions of the SQL definitions, so it'd still
not be very helpful.
I did not label any of src/test/modules/. It seems unnecessary since
we don't install those, and besides there ought to be someplace that
still provides test coverage for the original PG_MODULE_MAGIC macro.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/dd4d1b59-d0fe-49d5-b28f-1e463b68fa32@gmail.com
|
|
This allows building PL/Python against any Python 3.x version and
using another Python 3.x version at run time. This is useful for
installers that want to run against a separately downloaded Python, so
that they don't have to bundle it themselves.
This builds on the earlier patch to only use APIs supported by the
Limited API.
At the moment, this is not activated on MSVC because that leads to
build failures that no one could explain or cared enough to address.
This could be done later.
Reviewed-by: Jakob Egger <jakob@eggerapps.at>
Discussion: https://www.postgresql.org/message-id/flat/ee410de1-1e0b-4770-b125-eeefd4726a24@eisentraut.org
|
|
Using the Python Limited API would allow building PL/Python against
any Python 3.x version and using another Python 3.x version at run
time. This commit does not activate that, but it prepares the code to
only use APIs supported by the Limited API.
Implementation details:
- Convert static types to heap types
(https://docs.python.org/3/howto/isolating-extensions.html#heap-types).
- Replace PyRun_String() with component functions.
- Replace PyList_SET_ITEM() with PyList_SetItem().
This was previously committed as c47e8df815c and then reverted because
it wasn't working under Python older than 3.8. That has been fixed in
this version. There was a Python API change/bugfix between 3.7 and
3.8 that directly affects this patch. The relevant commit is
<https://github.com/python/cpython/commit/364f0b0f19c>. The
workarounds described there have been applied in this patch, and it
has been confirmed to work with Python 3.6 and 3.7.
Reviewed-by: Jakob Egger <jakob@eggerapps.at>
Discussion: https://www.postgresql.org/message-id/flat/ee410de1-1e0b-4770-b125-eeefd4726a24@eisentraut.org
|
|
This reverts commit c47e8df815c1c45f4e4fc90d5817d67ab088279f.
That commit makes the plpython tests crash with Python 3.6.* and
3.7.*. It will need further investigation and testing, so revert for
now.
|
|
Using the Python Limited API would allow building PL/Python against
any Python 3.x version and using another Python 3.x version at run
time. This commit does not activate that, but it prepares the code to
only use APIs supported by the Limited API.
Implementation details:
- Convert static types to heap types
(https://docs.python.org/3/howto/isolating-extensions.html#heap-types).
- Replace PyRun_String() with component functions.
- Replace PyList_SET_ITEM() with PyList_SetItem().
Reviewed-by: Jakob Egger <jakob@eggerapps.at>
Discussion: https://www.postgresql.org/message-id/flat/ee410de1-1e0b-4770-b125-eeefd4726a24@eisentraut.org
|
|
The checked version is already the current minimum supported version
(3.2).
Discussion: https://www.postgresql.org/message-id/flat/ee410de1-1e0b-4770-b125-eeefd4726a24@eisentraut.org
|
|
This adds a new variant of generated columns that are computed on read
(like a view, unlike the existing stored generated columns, which are
computed on write, like a materialized view).
The syntax for the column definition is
... GENERATED ALWAYS AS (...) VIRTUAL
and VIRTUAL is also optional. VIRTUAL is the default rather than
STORED to match various other SQL products. (The SQL standard makes
no specification about this, but it also doesn't know about VIRTUAL or
STORED.) (Also, virtual views are the default, rather than
materialized views.)
Virtual generated columns are stored in tuples as null values. (A
very early version of this patch had the ambition to not store them at
all. But so much stuff breaks or gets confused if you have tuples
where a column in the middle is completely missing. This is a
compromise, and it still saves space over being forced to use stored
generated columns. If we ever find a way to improve this, a bit of
pg_upgrade cleverness could allow for upgrades to a newer scheme.)
The capabilities and restrictions of virtual generated columns are
mostly the same as for stored generated columns. In some cases, this
patch keeps virtual generated columns more restricted than they might
technically need to be, to keep the two kinds consistent. Some of
that could maybe be relaxed later after separate careful
considerations.
Some functionality that is currently not supported, but could possibly
be added as incremental features, some easier than others:
- index on or using a virtual column
- hence also no unique constraints on virtual columns
- extended statistics on virtual columns
- foreign-key constraints on virtual columns
- not-null constraints on virtual columns (check constraints are supported)
- ALTER TABLE / DROP EXPRESSION
- virtual column cannot have domain type
- virtual columns are not supported in logical replication
The tests in generated_virtual.sql have been copied over from
generated_stored.sql with the keyword replaced. This way we can make
sure the behavior is mostly aligned, and the differences can be
visible. Some tests for currently not supported features are
currently commented out.
Reviewed-by: Jian He <jian.universality@gmail.com>
Reviewed-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Tested-by: Shlok Kyal <shlok.kyal.oss@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/a368248e-69e4-40be-9c07-6c3b5880b0a6@eisentraut.org
|
|
PLy_spi_execute_plan (PLyPlan.execute) and PLy_cursor_plan
(plpy.cursor) use PLy_output_convert to convert Python values
into Datums that can be passed to the query-to-execute. But they
failed to pay much attention to its warning that it can leave "cruft
generated along the way" behind. Repeated use of these methods can
result in a substantial memory leak for the duration of the calling
plpython function.
To fix, make a temporary memory context to invoke PLy_output_convert
in. This also lets us get rid of the rather fragile code that was
here for retail pfree's of the converted Datums. Indeed, we don't
need the PLyPlanObject.values field anymore at all, though I left it
in place in the back branches in the name of ABI stability.
Mat Arye and Tom Lane, per report from Mat Arye. Back-patch to all
supported branches.
Discussion: https://postgr.es/m/CADsUR0DvVgnZYWwnmKRK65MZg7YLUSTDLV61qdnrwtrAJgU6xw@mail.gmail.com
|
|
Backpatch-through: 13
|
|
Many of them just seem to have been copied around for no real reason.
Their presence causes (small) risks of hiding actual type mismatches
or silently discarding qualifiers
Discussion: https://www.postgresql.org/message-id/flat/461ea37c-8b58-43b4-9736-52884e862820@eisentraut.org
|
|
These tests relied on both next() and __next__(), but only the former is
needed since Python 2 support has been removed, so let's simplify a bit
the tests.
Author: Erik Wienhold
Discussion: https://postgr.es/m/173209043143.2092749.13692266486972491694@wrigleys.postgresql.org
|
|
as determined by IWYU
Similar to commit dbbca2cf299, but for contrib, pl, and src/test/.
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://www.postgresql.org/message-id/flat/0df1d5b1-8ca8-4f84-93be-121081bde049%40eisentraut.org
|
|
SPI_connect/SPI_connect_ext have not returned any value other than
SPI_OK_CONNECT since commit 1833f1a1c in v10; any errors are thrown
via ereport. (The most likely failure is out-of-memory, which has
always been thrown that way, so callers had better be prepared for
such errors.) This makes it somewhat pointless to check these
functions' result, and some callers within our code haven't been
bothering; indeed, the only usage example within spi.sgml doesn't
bother. So it's likely that the omission has propagated into
extensions too.
Hence, let's standardize on not checking, and document the return
value as historical, while not actually changing these functions'
behavior. (The original proposal was to change their return type
to "void", but that would needlessly break extensions that are
conforming to the old practice.) This saves a small amount of
boilerplate code in a lot of places.
Stepan Neretin
Discussion: https://postgr.es/m/CAMaYL5Z9Uk8cD9qGz9QaZ2UBJFOu7jFx5Mwbznz-1tBbPDQZow@mail.gmail.com
|
|
Reviewed-by: Andres Freund
Discussion: https://www.postgresql.org/message-id/54c29fb0-edf2-48ea-9814-44e918bbd6e8@iki.fi
|
|
Some of the nls.mk files used different indentation or line breaks
than the majority, which makes editing these files unnecessarily
confusing.
|
|
If we recursed to a new call of the same function, with a different
coldeflist (AS clause), it would fail because the inner call would
overwrite the outer call's idea of what to return. This is vaguely
like 1d2fe56e4 and c5bec5426, but it's not due to any API decisions:
it's just that we computed the actual output rowtype at the start of
the call, and saved it in the per-procedure data structure. We can
fix it at basically zero cost by doing the computation at the end
of each call instead of the start.
It's not clear that there's any real-world use-case for such a
function, but given that it doesn't cost anything to fix,
it'd be silly not to.
Per report from Andreas Karlsson. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/1651a46d-3c15-4028-a8c1-d74937b54e19@proxel.se
|
|
If a plpython-language trigger caused another one to be invoked,
the "TD" dictionary created for the inner one would overwrite the
outer one's "TD" dictionary. This is more or less the same problem
that 1d2fe56e4 fixed for ordinary functions in plpython, so fix it
the same way, by saving and restoring "TD" during a recursive
invocation.
This fix makes an ABI-incompatible change in struct PLySavedArgs.
I'm not too worried about that because it seems highly unlikely that
any extension is messing with those structs. We could imagine doing
something weird to preserve nominal ABI compatibility in the back
branches, like keeping the saved TD object in an extra element of
namedargs[]. However, that would only be very nominal compatibility:
if anything *is* touching PLySavedArgs, it would likely do the wrong
thing due to not knowing about the additional value. So I judge it
not worth the ugliness to do something different there.
(I also changed struct PLyProcedure, but its added field fits
into formerly-padding space, so that should be safe.)
Per bug #18456 from Jacques Combrink. This bug is very ancient,
so back-patch to all supported branches.
Discussion: https://postgr.es/m/3008982.1714853799@sss.pgh.pa.us
|
|
Source-Git-URL: https://git.postgresql.org/git/pgtranslation/messages.git
Source-Git-Hash: be182cc55e6f72c66215fd9b38851969e3ce5480
|
|
The "pltargs" variable wasn't marked volatile, which makes it unsafe
to change its value within the PG_TRY block. It looks like the worst
outcome would be to fail to release a refcount on Py_None during an
(improbable) error exit, which would likely go unnoticed in the field.
Still, it's a bug. A one-liner fix could be to mark pltargs volatile,
but on the whole it seems cleaner to arrange things so that we don't
change its value within PG_TRY.
Per report from Xing Guo. This has been there for quite awhile,
so back-patch to all supported branches.
Discussion: https://postgr.es/m/CACpMh+DLrk=fDv07MNpBT4J413fDAm+gmMXgi8cjPONE+jvzuw@mail.gmail.com
|
|
Similar to commit 7e735035f20.
Author: Richard Guo <guofenglinux@gmail.com>
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CAMbWs4-WhpCFMbXCjtJ%2BFzmjfPrp7Hw1pk4p%2BZpU95Kh3ofZ1A%40mail.gmail.com
|
|
Reported-by: Michael Paquier
Discussion: https://postgr.es/m/ZZKTDPxBBMt3C0J9@paquier.xyz
Backpatch-through: 12
|
|
There are a lot of Perl scripts in the tree, mostly code generation
and TAP tests. Occasionally, these scripts produce warnings. These
are probably always mistakes on the developer side (true positives).
Typical examples are warnings from genbki.pl or related when you make
a mess in the catalog files during development, or warnings from tests
when they massage a config file that looks different on different
hosts, or mistakes during merges (e.g., duplicate subroutine
definitions), or just mistakes that weren't noticed because there is a
lot of output in a verbose build.
This changes all warnings into fatal errors, by replacing
use warnings;
by
use warnings FATAL => 'all';
in all Perl files.
Discussion: https://www.postgresql.org/message-id/flat/06f899fd-1826-05ab-42d6-adeb1fd5e200%40eisentraut.org
|
|
Brown-paper-bag bug in commit 58c3151bb. Per buildfarm.
|
|
Like commit 388e80132, use "#pragma GCC system_header" to silence
warnings appearing within the Python headers, since newer Python
versions no longer worry about some restrictions we still use like
-Wdeclaration-after-statement.
This patch improves on 388e80132 by inventing a separate wrapper
header file, allowing the pragma to be tightly scoped to just
the Python headers and not other stuff we have laying about in
plpython.h. I applied the same technique to plperl for the same
reason: the original patch suppressed warnings for a good deal
of our own code, not only the Perl headers.
Like the previous commit, back-patch to supported branches.
Peter Eisentraut and Tom Lane
Discussion: https://postgr.es/m/ae523163-6d2a-4b81-a875-832e48dec502@eisentraut.org
|
|
A PostgreSQL release tarball contains a number of prebuilt files, in
particular files produced by bison, flex, perl, and well as html and
man documentation. We have done this consistent with established
practice at the time to not require these tools for building from a
tarball. Some of these tools were hard to get, or get the right
version of, from time to time, and shipping the prebuilt output was a
convenience to users.
Now this has at least two problems:
One, we have to make the build system(s) work in two modes: Building
from a git checkout and building from a tarball. This is pretty
complicated, but it works so far for autoconf/make. It does not
currently work for meson; you can currently only build with meson from
a git checkout. Making meson builds work from a tarball seems very
difficult or impossible. One particular problem is that since meson
requires a separate build directory, we cannot make the build update
files like gram.h in the source tree. So if you were to build from a
tarball and update gram.y, you will have a gram.h in the source tree
and one in the build tree, but the way things work is that the
compiler will always use the one in the source tree. So you cannot,
for example, make any gram.y changes when building from a tarball.
This seems impossible to fix in a non-horrible way.
Second, there is increased interest nowadays in precisely tracking the
origin of software. We can reasonably track contributions into the
git tree, and users can reasonably track the path from a tarball to
packages and downloads and installs. But what happens between the git
tree and the tarball is obscure and in some cases non-reproducible.
The solution for both of these issues is to get rid of the step that
adds prebuilt files to the tarball. The tarball now only contains
what is in the git tree (*). Getting the additional build
dependencies is no longer a problem nowadays, and the complications to
keep these dual build modes working are significant. And of course we
want to get the meson build system working universally.
This commit removes the make distprep target altogether. The make
dist target continues to do its job, it just doesn't call distprep
anymore.
(*) - The tarball also contains the INSTALL file that is built at make
dist time, but not by distprep. This is unchanged for now.
The make maintainer-clean target, whose job it is to remove the
prebuilt files in addition to what make distclean does, is now just an
alias to make distprep. (In practice, it is probably obsolete given
that git clean is available.)
The following programs are now hard build requirements in configure
(they were already required by meson.build):
- bison
- flex
- perl
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://www.postgresql.org/message-id/flat/e07408d9-e5f2-d9fd-5672-f53354e9305e@eisentraut.org
|
|
PLy_elog() was not able to handle correctly cases where a SPI called
failed, which would fill in a DETAIL string able to trigger an
assertion. We may want to improve this infrastructure so as it is able
to provide any extra detail information provided by an error stack, but
this is left as a future improvement as it could impact existing error
stacks and any applications that depend on them. For now, the assertion
is removed and a regression test is added to cover the case of a failure
with a detail string.
This problem exists since 2bd78eb8d51c, so backpatch all the way down
with tweaks to the regression tests output added where required.
Author: Alexander Lakhin
Discussion: https://postgr.es/m/18070-ab9c171cbf4ebb0f@postgresql.org
Backpatch-through: 11
|
|
Source-Git-URL: https://git.postgresql.org/git/pgtranslation/messages.git
Source-Git-Hash: 97398d714ace69f0c919984e160f429b6fd2300e
|
|
Source-Git-URL: https://git.postgresql.org/git/pgtranslation/messages.git
Source-Git-Hash: ab77975e9d2cde44da796c18af3ec1a66f0df7ae
|
|
Source-Git-URL: https://git.postgresql.org/git/pgtranslation/messages.git
Source-Git-Hash: 642d41265b1ea68ae71a66ade5c5440ba366a890
|
|
If we exit a PG_TRY block early via "continue", "break", "goto", or
"return", we'll skip unwinding its exception stack. This change
moves a couple of such "return" statements in PL/Python out of
PG_TRY blocks. This was introduced in d0aa965c0a and affects all
supported versions.
We might also be able to add compile-time checks to prevent
recurrence, but that is left as a future exercise.
Reported-by: Mikhail Gribkov, Xing Guo
Author: Xing Guo
Reviewed-by: Michael Paquier, Andres Freund, Tom Lane
Discussion: https://postgr.es/m/CAMEv5_v5Y%2B-D%3DCO1%2Bqoe16sAmgC4sbbQjz%2BUtcHmB6zcgS%2B5Ew%40mail.gmail.com
Discussion: https://postgr.es/m/CACpMh%2BCMsGMRKFzFMm3bYTzQmMU5nfEEoEDU2apJcc4hid36AQ%40mail.gmail.com
Backpatch-through: 11 (all supported versions)
|
|
Like plperl before f47004add, plpython wasn't being sufficiently
careful about checking that list-of-list structures represent
rectangular arrays, so that it would accept some cases in which
different parts of the "array" are nested to different depths.
This was exacerbated by Python's weak distinction between
sequences and lists, so that in some cases strings could get
treated as though they are lists (and burst into individual
characters) even though a different ordering of the upper-level
list would give a different result.
Some of this behavior was unreachable (without risking a crash)
before 81eaaf65e. It seems like a good idea to clean it all up
in the same releases, rather than shipping a non-crashing but
nonetheless visibly buggy behavior in the name of minimal change.
Hence, back-patch.
Per bug #17912 and further testing by Alexander Lakhin.
Discussion: https://postgr.es/m/17912-82ceed78731d9cdc@postgresql.org
|
|
If PLySequence_ToArray came across a zero-length sublist, it'd compute
the overall array size as zero, possibly leading to a memory clobber.
(This would likely qualify as a security bug, were it not that plpython
is an untrusted language already.)
I think there are other corner-case issues in this code as well, notably
that the error messages don't match the core code and for some ranges
of array sizes you'd get "invalid memory alloc request size" rather than
the intended message about array size.
Really this code has no business doing its own array size calculation
at all, so remove the faulty code in favor of using ArrayGetNItems().
Per bug #17912 from Alexander Lakhin. Bug seems to have come in with
commit 94aceed31, so back-patch to all supported branches.
Discussion: https://postgr.es/m/17912-82ceed78731d9cdc@postgresql.org
|
|
Author: Alexander Lakhin
Discussion: https://postgr.es/m/699beab4-a6ca-92c9-f152-f559caf6dc25@gmail.com
|
|
Make sure that function declarations use names that exactly match the
corresponding names from function definitions in a few places. These
inconsistencies were all introduced relatively recently, after the code
base had parameter name mismatches fixed in bulk (see commits starting
with commits 4274dc22 and 035ce1fe).
pg_bsd_indent still has a couple of similar inconsistencies, which I
(pgeoghegan) have left untouched for now.
Like all earlier commits that cleaned up function parameter names, this
commit was written with help from clang-tidy.
|
|
When extracting an attr from a cached tuple in the syscache with
SysCacheGetAttr the isnull parameter must be checked in case the
attr cannot be NULL. For cases when this is known beforehand, a
wrapper is introduced which perform the errorhandling internally
on behalf of the caller, invoking an elog in case of a NULL attr.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/AD76405E-DB45-46B6-941F-17B1EB3A9076@yesql.se
|
|
To define our own install target, we need dependencies on the i18n targets,
which we did not collect so far.
Discussion: https://postgr.es/m/3fc3bb9b-f7f8-d442-35c1-ec82280c564a@enterprisedb.com
|
|
PL/pgSQL was misspelled in a few places, so fix these.
Author: Zhang Mingli
Reviewed-by: Richard Guo
Discussion: https://postgr.es/m/1bd41572-9cd9-465e-9f59-ee45385e51b4@Spark
|
|
One file per line seems best. We already did this in some cases.
This adopts the same format everywhere (except in some cases where the
list reasonably fits on one line).
|
|
We undefined them to avoid warnings about macro redefinitions. But we haven't
fully followed the necessary include order, since at least 147c2482542, in
2011. Recently the combination of the include order rules not being followed
and undefining _POSIX_C_SOURCE started to cause a compile failure, starting
with 03023a2664f. Undefining _POSIX_C_SOURCE hides clock_gettime(), which is
referenced in an inline function as of 03023a2664f, whereas it was a macro
before.
After seeing some evidence that undefining _POSIX_C_SOURCE et al isn't
required, I tried to build postgres with plpython on most of our supported
platforms (except DragonFlyBSD and Illumos, but similar systems were tested),
with/without the #undefines. No compiler warning / behavioral difference.
The oldest supported python version, 3.2, defines _POSIX_C_SOURCE to 200112L
ad _XOPEN_SOURCE to 600, whereas newer versions of python use 200809L/700
respectively. As _POSIX_C_SOURCE/_XOPEN_SOURCE will default to the newer
operating system on most platforms, it's possible that when using python 3.2
new warnings would be emitted - but that seems acceptable.
It's possible that this approach won't work on some older platforms. But
getting rid of most of the include-order complexity seems promising, and it's
an easily revertible patch if we end up having to go another way.
Discussion: https://postgr.es/m/20230124165814.2njc7gnvubn2amh6@awork3.anarazel.de
|
|
Until now we undefined and then redefined a lot of *printf macros due to
worries about conflicts with Python.h macro definitions. Current Python.h
doesn't define any *printf macros, and older versions just defined snprintf,
vsnprintf, guarded by #if defined(MS_WIN32) && !defined(HAVE_SNPRINTF).
Thus we can replace the undefine/define section with a single
#define HAVE_SNPRINTF 1
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/20230124165814.2njc7gnvubn2amh6@awork3.anarazel.de
|
|
Backpatch-through: 11
|
|
This is not really complete, but it catches most cases of practical
interest. The main omissions are:
* regtype, regprocedure, and regoperator parse type names by
calling the main grammar, so any grammar-detected syntax error
will still be a hard error. Also, if one includes a type
modifier in such a type specification, errors detected by the
typmodin function will be hard errors.
* Lookup errors are handled just by passing missing_ok = true
to the relevant catalog lookup function. Because we've used
quite a restrictive definition of "missing_ok", this means that
edge cases such as "the named schema exists, but you lack
USAGE permission on it" are still hard errors.
It would make sense to me to replace most/all missing_ok
parameters with an escontext parameter and then allow these
additional lookup failure cases to be trapped too. But that's
a job for some other day.
Discussion: https://postgr.es/m/3342239.1671988406@sss.pgh.pa.us
|
|
Discussion: https://postgr.es/m/222b43a5-2fb3-2c1b-9cd0-375d376c8246@dunslane.net
|
|
This substantially speeds up building for windows, due to the vast amount of
headers included via windows.h. A cross build from linux targetting mingw goes
from
994.11user 136.43system 0:31.58elapsed 3579%CPU
to
422.41user 89.05system 0:14.35elapsed 3562%CPU
The wins on windows are similar-ish (but I don't have a system at hand just
now for actual numbers). Targetting other operating systems the wins are far
smaller (tested linux, macOS, FreeBSD).
For now precompiled headers are disabled by default, it's not clear how well
they work on all platforms. E.g. on FreeBSD gcc doesn't seem to have working
support, but clang does.
When doing a full build precompiled headers are only beneficial for targets
with multiple .c files, as meson builds a separate precompiled header for each
target (so that different compilation options take effect). This commit
therefore only changes target with at least two .c files to use precompiled
headers.
Because this commit adds b_pch=false to the default_options new build
directories will have precompiled headers disabled by default, however
existing build directories will continue use the default value of b_pch, which
is true.
Note that using precompiled headers with ccache requires setting
CCACHE_SLOPPINESS=pch_defines,time_macros to get hits.
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/CA+hUKG+50eOUbN++ocDc0Qnp9Pvmou23DSXu=ZA6fepOcftKqA@mail.gmail.com
Discussion: https://postgr.es/m/c5736f70-bb6d-8d25-e35c-e3d886e4e905@enterprisedb.com
Discussion: https://postgr.es/m/20190826054000.GE7005%40paquier.xyz
|
