| Age | Commit message (Collapse) | Author |
|---|
|
For the purposes of this discussion, row_number() is just as good
as rank(), and its behavior is easier to understand and describe.
So let's switch the examples to using row_number().
Along the way to checking the results given in the tutorial,
I found it helpful to extract the empsalary table we use in the
regression tests, which is evidently the same data that was used
to make these results. So I shoved that into advanced.source
to improve the coverage of that file a little. (There's still
several pages of the tutorial that are not included in it,
but at least now 3.5 Window Functions is covered.)
Suggested-by: "David G. Johnston" <david.g.johnston@gmail.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/173737973383.1070.1832752929070067441@wrigleys.postgresql.org
|
|
This topic wasn't really covered before, so fill in some details.
Author: Florents Tselai <florents.tselai@gmail.com>
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/90853055-5BBD-493D-91E5-721677C7C59B@gmail.com
|
|
Backpatch-through: 13
|
|
Reported-by: Michael Paquier
Discussion: https://postgr.es/m/ZZKTDPxBBMt3C0J9@paquier.xyz
Backpatch-through: 12
|
|
Run pgindent, pgperltidy, and reformat-dat-files.
This set of diffs is a bit larger than typical. We've updated to
pg_bsd_indent 2.1.2, which properly indents variable declarations that
have multi-line initialization expressions (the continuation lines are
now indented one tab stop). We've also updated to perltidy version
20230309 and changed some of its settings, which reduces its desire to
add whitespace to lines to make assignments etc. line up. Going
forward, that should make for fewer random-seeming changes to existing
code.
Discussion: https://postgr.es/m/20230428092545.qfb3y5wcu4cm75ur@alvherre.pgsql
|
|
The affected functions are: bsearch, memcmp, memcpy, memset, memmove,
qsort, repalloc
Reviewed-by: Corey Huinker <corey.huinker@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/fd9adf5d-b1aa-e82f-e4c7-263c30145807%40enterprisedb.com
|
|
Backpatch-through: 11
|
|
basics.source is supposed to be pretty closely in step with
the examples in chapter 2 of the tutorial, but I forgot to
update it in commit f05a5e000. Fix that, and adjust a couple
of other discrepancies that had crept in over time.
(I notice that advanced.source is nowhere near being in sync
with chapter 3, but I lack the ambition to do something
about that right now.)
|
|
Backpatch-through: 10
|
|
Update src/tutorial/basics.source to match.
Author: Jürgen Purtz <juergen@purtz.de>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: "David G. Johnston" <david.g.johnston@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/158996922318.7035.10603922579567326239@wrigleys.postgresql.org
|
|
This is a follow-on patch to 92c12e46d5. In that patch, we renamed
"altitude" to "elevation" in the docs, based on these details:
https://mapscaping.com/blogs/geo-candy/what-is-the-difference-between-elevation-relief-and-altitude
This renames the tutorial SQL files to match the documentation.
Reported-by: max1@inbox.ru
Discussion: https://postgr.es/m/161512392887.1046.3137472627109459518@wrigleys.postgresql.org
Backpatch-through: 9.6
|
|
Reverts a portion of commit 344190b7e. Apparently, back in the
twentieth century we had some issues with multi-statement SQL
functions, but they've worked fine for a long time.
Daniel Westermann
Discussion: https://postgr.es/m/GVAP278MB04242DCBF5E31F528D53FA18D2A90@GVAP278MB0424.CHEP278.PROD.OUTLOOK.COM
|
|
Backpatch-through: 9.5
|
|
This feature has been a thorn in our sides for a long time, causing
many grammatical ambiguity problems. It doesn't seem worth the
pain to continue to support it, so remove it.
There are some follow-on improvements we can make in the grammar,
but this commit only removes the bare minimum number of productions,
plus assorted backend support code.
Note that pg_dump and psql continue to have full support, since
they may be used against older servers. However, pg_dump warns
about postfix operators. There is also a check in pg_upgrade.
Documentation-wise, I (tgl) largely removed the "left unary"
terminology in favor of saying "prefix operator", which is
a more standard and IMO less confusing term.
I included a catversion bump, although no initial catalog data
changes here, to mark the boundary at which oprkind = 'r'
stopped being valid in pg_operator.
Mark Dilger, based on work by myself and Robert Haas;
review by John Naylor
Discussion: https://postgr.es/m/38ca86db-42ab-9b48-2902-337a0d6b8311@2ndquadrant.com
|
|
This is needlessly different from our usual style otherwise.
Author: Jürgen Purtz <juergen@purtz.de>
Discussion: https://www.postgresql.org/message-id/flat/158996922318.7035.10603922579567326239@wrigleys.postgresql.org
|
|
Backpatch-through: update all files in master, backpatch legal files through 9.4
|
|
A set of SQL files are generated for the tutorial when compiling the
code, so let's avoid any risk to have them added in the tree in the
future.
|
|
Support has been removed as of 5ded4bd, but code related to the tutorial
still used it. Functions using version-1 are already present for some
time in the tutorial, and the documentation mentions them, so just
replace the old version with the new one.
Reported-by: Pavel Stehule
Analyzed-by: Euler Taveira
Author: Michael Paquier
Reviewed-by: Tom Lane, Pavel Stehule
Discussion: https://postgr.es/m/CAFj8pRCgC2uDzrw-vvanXu6Z3ofyviEOQPEpH6_aL4OCe7JRag@mail.gmail.com
|
|
Switch to 2.1 version of pg_bsd_indent. This formats
multiline function declarations "correctly", that is with
additional lines of parameter declarations indented to match
where the first line's left parenthesis is.
Discussion: https://postgr.es/m/CAEepm=0P3FeTXRcU5B2W3jv3PgRVZ-kGUXLGfd42FFhUROO3ug@mail.gmail.com
|
|
Reported-by: Daniel Gustafsson
Discussion: https://postgr.es/m/431D5BC1-9696-43FA-B54C-39D5503EB753@yesql.se
Backpatch-through: master
|
|
Backpatch-through: certain files through 9.4
|
|
Previously a lot of the error messages referenced the type in the
error message itself. That requires that the message is translated
separately for each type.
Note that currently a few smallint cases continue to reference the
integer, rather than smallint, type. A later patch will create a
separate routine for 16bit input.
Author: Andres Freund
Discussion: https://postgr.es/m/20180707200158.wpqkd7rjr4jxq5g7@alap3.anarazel.de
|
|
Backpatch-through: certain files through 9.3
|
|
Historically, the selectivity functions have simply not distinguished
< from <=, or > from >=, arguing that the fraction of the population that
satisfies the "=" aspect can be considered to be vanishingly small, if the
comparison value isn't any of the most-common-values for the variable.
(If it is, the code path that executes the operator against each MCV will
take care of things properly.) But that isn't really true unless we're
dealing with a continuum of variable values, and in practice we seldom are.
If "x = const" would estimate a nonzero number of rows for a given const
value, then it follows that we ought to estimate different numbers of rows
for "x < const" and "x <= const", even if the const is not one of the MCVs.
Handling this more honestly makes a significant difference in edge cases,
such as the estimate for a tight range (x BETWEEN y AND z where y and z
are close together).
Hence, split scalarltsel into scalarltsel/scalarlesel, and similarly
split scalargtsel into scalargtsel/scalargesel. Adjust <= and >=
operator definitions to reference the new selectivity functions.
Improve the core ineq_histogram_selectivity() function to make a
correction for equality. (Along the way, I learned quite a bit about
exactly why that function gives good answers, which I tried to memorialize
in improved comments.)
The corresponding join selectivity functions were, and remain, just stubs.
But I chose to split them similarly, to avoid confusion and to prevent the
need for doing this exercise again if someone ever makes them less stubby.
In passing, change ineq_histogram_selectivity's clamp for extreme
probability estimates so that it varies depending on the histogram
size, instead of being hardwired at 0.0001. With the default histogram
size of 100 entries, you still get the old clamp value, but bigger
histograms should allow us to put more faith in edge values.
Tom Lane, reviewed by Aleksander Alekseev and Kuntal Ghosh
Discussion: https://postgr.es/m/12232.1499140410@sss.pgh.pa.us
|
|
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4dd0dad0dd9eea4be9cc1412373a8c89 wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
|
|
The new indent version includes numerous fixes thanks to Piotr Stefaniak.
The main changes visible in this commit are:
* Nicer formatting of function-pointer declarations.
* No longer unexpectedly removes spaces in expressions using casts,
sizeof, or offsetof.
* No longer wants to add a space in "struct structname *varname", as
well as some similar cases for const- or volatile-qualified pointers.
* Declarations using PG_USED_FOR_ASSERTS_ONLY are formatted more nicely.
* Fixes bug where comments following declarations were sometimes placed
with no space separating them from the code.
* Fixes some odd decisions for comments following case labels.
* Fixes some cases where comments following code were indented to less
than the expected column 33.
On the less good side, it now tends to put more whitespace around typedef
names that are not listed in typedefs.list. This might encourage us to
put more effort into typedef name collection; it's not really a bug in
indent itself.
There are more changes coming after this round, having to do with comment
indentation and alignment of lines appearing within parentheses. I wanted
to limit the size of the diffs to something that could be reviewed without
one's eyes completely glazing over, so it seemed better to split up the
changes as much as practical.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
|
|
When commit 3e23b68dac006e8deb0afa327e855258df8de064 introduced
single-byte varlena headers, its fmgr.h changes presented
PG_GETARG_TEXT_PP() and PG_GETARG_TEXT_P() as equals. Its postgres.h
changes presented PG_DETOAST_DATUM_PACKED() and VARDATA_ANY() as the
exceptional case. Now, instead, firmly recommend PG_GETARG_TEXT_PP()
over PG_GETARG_TEXT_P(); likewise for other ...PP() macros. This shaves
cycles and invites consistency of style.
|
|
|
|
Backpatch certain files through 9.1
|
|
Remove a bunch of "extern Datum foo(PG_FUNCTION_ARGS);" declarations that
are no longer needed now that PG_FUNCTION_INFO_V1(foo) provides that.
Some of these were evidently missed in commit e7128e8dbb305059, but others
were cargo-culted in in code added since then. Possibly that can be blamed
in part on the fact that we'd not fixed relevant documentation examples,
which I've now done.
|
|
Backpatch certain files through 9.0
|
|
Report by Robert Haas
|
|
This includes removing tabs after periods in C comments, which was
applied to back branches, so this change should not effect backpatching.
|
|
This simplifies the docs and makes it easier to cut/paste command lines.
|
|
Update all files in head, and files COPYRIGHT and legal.sgml in all back
branches.
|
|
|
|
Un-double the backslashes in the LIKE patterns, since
standard_conforming_strings is now the default. Just to be sure, include
a command to set standard_conforming_strings to ON in the example.
Back-patch to 9.1, where standard_conforming_strings became the default.
Josh Kupershmidt, reviewed by Jeff Janes
|
|
Fully update git head, and update back branches in ./COPYRIGHT and
legal.sgml files.
|
|
|
|
|
|
|
|
|
|
at end of files.
|
|
Backpatch to 8.4.X.
|
|
|
|
provided by Andrew.
|
|
|
|
This particular batch was just for *.c and *.h file.
The changes were made with the following 2 commands:
find . \( \( -name 'libstemmer' -o -name 'expected' -o -name 'ppport.h' \) -prune \) -o \( -name '*.[ch]' \) \( -exec grep -q '\$PostgreSQL' {} \; -o -print \) | while read file ; do head -n 1 < $file | grep -q '^/\*' && echo $file; done | xargs -l sed -i -e '1s/^\// /' -e '1i/*\n * $PostgreSQL:$ \n *'
find . \( \( -name 'libstemmer' -o -name 'expected' -o -name 'ppport.h' \) -prune \) -o \( -name '*.[ch]' \) \( -exec grep -q '\$PostgreSQL' {} \; -o -print \) | xargs -l sed -i -e '1i/*\n * $PostgreSQL:$ \n */'
|
|
modules are built. Foremost, it creates a solid distinction between these two
types of targets based on what had already been implemented and duplicated in
ad hoc ways before. Specifically,
- Dynamically loadable modules no longer get a soname. The numbers previously
set in the makefiles were dummy numbers anyway, and the presence of a soname
upset a few packaging tools, so it is nicer not to have one.
- The cumbersome detour taken on installation (build a libfoo.so.0.0.0 and
then override the rule to install foo.so instead) is removed.
- Lots of duplicated code simplified.
|
|
|
