This is very much a work in progress. Not tested, probably dont do it. This page will be updated when its working.

BIGTREETECH SKR mini E3 v3.0 Creality Sprite Extruder Pro Antclabs BL Touch (Genuine) Raspberry Pi (Mainsail OS)

Made by CEADD - ceadd.ca Special thanks to bigtreetech, jamesh1978 and nopp

To use this config, the firmware should be compiled for the STM32G0B1 with a "8KiB bootloader" and USB communication.

The "make flash" command does not work on the SKR mini E3. Instead, after running "make", copy the generated "out/klipper.bin" file to a file named "firmware.bin" on an SD card and then restart the SKR mini E3 with that SD card.