ExpressLRS is an open source project that enables the connection between drone and remote control in an efficient way. To support the project itself a little bit, I have developed other hardware alternatives, which are of course also open source. To support the project visit: https://github.com/ExpressLRS/ExpressLRS
Parameter for TX Mini REV1:
- Layer: 2
- Thickness: 1,2mm
- Minimum Copper Trace Width: 0.15mm
- Pin 0 (Boot) to GND Pad for initial upload of the program
Parameter for RX Nano REV1:
- Layer: 4
- Thickness: 1,2mm / 1mm
- Minimum Copper Trace Width: 0.09mm
